linux/drivers/net/wireless/ath/ath10k/wmi.h
<<
>>
Prefs
   1/* SPDX-License-Identifier: ISC */
   2/*
   3 * Copyright (c) 2005-2011 Atheros Communications Inc.
   4 * Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
   5 * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
   6 */
   7
   8#ifndef _WMI_H_
   9#define _WMI_H_
  10
  11#include <linux/types.h>
  12#include <linux/ieee80211.h>
  13
  14/*
  15 * This file specifies the WMI interface for the Unified Software
  16 * Architecture.
  17 *
  18 * It includes definitions of all the commands and events. Commands are
  19 * messages from the host to the target. Events and Replies are messages
  20 * from the target to the host.
  21 *
  22 * Ownership of correctness in regards to WMI commands belongs to the host
  23 * driver and the target is not required to validate parameters for value,
  24 * proper range, or any other checking.
  25 *
  26 * Guidelines for extending this interface are below.
  27 *
  28 * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff
  29 *
  30 * 2. Use ONLY u32 type for defining member variables within WMI
  31 *    command/event structures. Do not use u8, u16, bool or
  32 *    enum types within these structures.
  33 *
  34 * 3. DO NOT define bit fields within structures. Implement bit fields
  35 *    using masks if necessary. Do not use the programming language's bit
  36 *    field definition.
  37 *
  38 * 4. Define macros for encode/decode of u8, u16 fields within
  39 *    the u32 variables. Use these macros for set/get of these fields.
  40 *    Try to use this to optimize the structure without bloating it with
  41 *    u32 variables for every lower sized field.
  42 *
  43 * 5. Do not use PACK/UNPACK attributes for the structures as each member
  44 *    variable is already 4-byte aligned by virtue of being a u32
  45 *    type.
  46 *
  47 * 6. Comment each parameter part of the WMI command/event structure by
  48 *    using the 2 stars at the beginning of C comment instead of one star to
  49 *    enable HTML document generation using Doxygen.
  50 *
  51 */
  52
  53/* Control Path */
  54struct wmi_cmd_hdr {
  55        __le32 cmd_id;
  56} __packed;
  57
  58#define WMI_CMD_HDR_CMD_ID_MASK   0x00FFFFFF
  59#define WMI_CMD_HDR_CMD_ID_LSB    0
  60#define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000
  61#define WMI_CMD_HDR_PLT_PRIV_LSB  24
  62
  63#define HTC_PROTOCOL_VERSION    0x0002
  64#define WMI_PROTOCOL_VERSION    0x0002
  65
  66/*
  67 * There is no signed version of __le32, so for a temporary solution come
  68 * up with our own version. The idea is from fs/ntfs/endian.h.
  69 *
  70 * Use a_ prefix so that it doesn't conflict if we get proper support to
  71 * linux/types.h.
  72 */
  73typedef __s32 __bitwise a_sle32;
  74
  75static inline a_sle32 a_cpu_to_sle32(s32 val)
  76{
  77        return (__force a_sle32)cpu_to_le32(val);
  78}
  79
  80static inline s32 a_sle32_to_cpu(a_sle32 val)
  81{
  82        return le32_to_cpu((__force __le32)val);
  83}
  84
  85enum wmi_service {
  86        WMI_SERVICE_BEACON_OFFLOAD = 0,
  87        WMI_SERVICE_SCAN_OFFLOAD,
  88        WMI_SERVICE_ROAM_OFFLOAD,
  89        WMI_SERVICE_BCN_MISS_OFFLOAD,
  90        WMI_SERVICE_STA_PWRSAVE,
  91        WMI_SERVICE_STA_ADVANCED_PWRSAVE,
  92        WMI_SERVICE_AP_UAPSD,
  93        WMI_SERVICE_AP_DFS,
  94        WMI_SERVICE_11AC,
  95        WMI_SERVICE_BLOCKACK,
  96        WMI_SERVICE_PHYERR,
  97        WMI_SERVICE_BCN_FILTER,
  98        WMI_SERVICE_RTT,
  99        WMI_SERVICE_RATECTRL,
 100        WMI_SERVICE_WOW,
 101        WMI_SERVICE_RATECTRL_CACHE,
 102        WMI_SERVICE_IRAM_TIDS,
 103        WMI_SERVICE_ARPNS_OFFLOAD,
 104        WMI_SERVICE_NLO,
 105        WMI_SERVICE_GTK_OFFLOAD,
 106        WMI_SERVICE_SCAN_SCH,
 107        WMI_SERVICE_CSA_OFFLOAD,
 108        WMI_SERVICE_CHATTER,
 109        WMI_SERVICE_COEX_FREQAVOID,
 110        WMI_SERVICE_PACKET_POWER_SAVE,
 111        WMI_SERVICE_FORCE_FW_HANG,
 112        WMI_SERVICE_GPIO,
 113        WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
 114        WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 115        WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 116        WMI_SERVICE_STA_KEEP_ALIVE,
 117        WMI_SERVICE_TX_ENCAP,
 118        WMI_SERVICE_BURST,
 119        WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 120        WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 121        WMI_SERVICE_ROAM_SCAN_OFFLOAD,
 122        WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
 123        WMI_SERVICE_EARLY_RX,
 124        WMI_SERVICE_STA_SMPS,
 125        WMI_SERVICE_FWTEST,
 126        WMI_SERVICE_STA_WMMAC,
 127        WMI_SERVICE_TDLS,
 128        WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE,
 129        WMI_SERVICE_ADAPTIVE_OCS,
 130        WMI_SERVICE_BA_SSN_SUPPORT,
 131        WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE,
 132        WMI_SERVICE_WLAN_HB,
 133        WMI_SERVICE_LTE_ANT_SHARE_SUPPORT,
 134        WMI_SERVICE_BATCH_SCAN,
 135        WMI_SERVICE_QPOWER,
 136        WMI_SERVICE_PLMREQ,
 137        WMI_SERVICE_THERMAL_MGMT,
 138        WMI_SERVICE_RMC,
 139        WMI_SERVICE_MHF_OFFLOAD,
 140        WMI_SERVICE_COEX_SAR,
 141        WMI_SERVICE_BCN_TXRATE_OVERRIDE,
 142        WMI_SERVICE_NAN,
 143        WMI_SERVICE_L1SS_STAT,
 144        WMI_SERVICE_ESTIMATE_LINKSPEED,
 145        WMI_SERVICE_OBSS_SCAN,
 146        WMI_SERVICE_TDLS_OFFCHAN,
 147        WMI_SERVICE_TDLS_UAPSD_BUFFER_STA,
 148        WMI_SERVICE_TDLS_UAPSD_SLEEP_STA,
 149        WMI_SERVICE_IBSS_PWRSAVE,
 150        WMI_SERVICE_LPASS,
 151        WMI_SERVICE_EXTSCAN,
 152        WMI_SERVICE_D0WOW,
 153        WMI_SERVICE_HSOFFLOAD,
 154        WMI_SERVICE_ROAM_HO_OFFLOAD,
 155        WMI_SERVICE_RX_FULL_REORDER,
 156        WMI_SERVICE_DHCP_OFFLOAD,
 157        WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT,
 158        WMI_SERVICE_MDNS_OFFLOAD,
 159        WMI_SERVICE_SAP_AUTH_OFFLOAD,
 160        WMI_SERVICE_ATF,
 161        WMI_SERVICE_COEX_GPIO,
 162        WMI_SERVICE_ENHANCED_PROXY_STA,
 163        WMI_SERVICE_TT,
 164        WMI_SERVICE_PEER_CACHING,
 165        WMI_SERVICE_AUX_SPECTRAL_INTF,
 166        WMI_SERVICE_AUX_CHAN_LOAD_INTF,
 167        WMI_SERVICE_BSS_CHANNEL_INFO_64,
 168        WMI_SERVICE_EXT_RES_CFG_SUPPORT,
 169        WMI_SERVICE_MESH_11S,
 170        WMI_SERVICE_MESH_NON_11S,
 171        WMI_SERVICE_PEER_STATS,
 172        WMI_SERVICE_RESTRT_CHNL_SUPPORT,
 173        WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
 174        WMI_SERVICE_TX_MODE_PUSH_ONLY,
 175        WMI_SERVICE_TX_MODE_PUSH_PULL,
 176        WMI_SERVICE_TX_MODE_DYNAMIC,
 177        WMI_SERVICE_VDEV_RX_FILTER,
 178        WMI_SERVICE_BTCOEX,
 179        WMI_SERVICE_CHECK_CAL_VERSION,
 180        WMI_SERVICE_DBGLOG_WARN2,
 181        WMI_SERVICE_BTCOEX_DUTY_CYCLE,
 182        WMI_SERVICE_4_WIRE_COEX_SUPPORT,
 183        WMI_SERVICE_EXTENDED_NSS_SUPPORT,
 184        WMI_SERVICE_PROG_GPIO_BAND_SELECT,
 185        WMI_SERVICE_SMART_LOGGING_SUPPORT,
 186        WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
 187        WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
 188        WMI_SERVICE_MGMT_TX_WMI,
 189        WMI_SERVICE_TDLS_WIDER_BANDWIDTH,
 190        WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
 191        WMI_SERVICE_HOST_DFS_CHECK_SUPPORT,
 192        WMI_SERVICE_TPC_STATS_FINAL,
 193        WMI_SERVICE_RESET_CHIP,
 194        WMI_SERVICE_SPOOF_MAC_SUPPORT,
 195        WMI_SERVICE_TX_DATA_ACK_RSSI,
 196        WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
 197        WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
 198        WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT,
 199        WMI_SERVICE_THERM_THROT,
 200        WMI_SERVICE_RTT_RESPONDER_ROLE,
 201        WMI_SERVICE_PER_PACKET_SW_ENCRYPT,
 202        WMI_SERVICE_REPORT_AIRTIME,
 203        WMI_SERVICE_SYNC_DELETE_CMDS,
 204        WMI_SERVICE_TX_PWR_PER_PEER,
 205        WMI_SERVICE_SUPPORT_EXTEND_ADDRESS,
 206        WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT,
 207        WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
 208
 209        /* Remember to add the new value to wmi_service_name()! */
 210
 211        /* keep last */
 212        WMI_SERVICE_MAX,
 213};
 214
 215enum wmi_10x_service {
 216        WMI_10X_SERVICE_BEACON_OFFLOAD = 0,
 217        WMI_10X_SERVICE_SCAN_OFFLOAD,
 218        WMI_10X_SERVICE_ROAM_OFFLOAD,
 219        WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
 220        WMI_10X_SERVICE_STA_PWRSAVE,
 221        WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
 222        WMI_10X_SERVICE_AP_UAPSD,
 223        WMI_10X_SERVICE_AP_DFS,
 224        WMI_10X_SERVICE_11AC,
 225        WMI_10X_SERVICE_BLOCKACK,
 226        WMI_10X_SERVICE_PHYERR,
 227        WMI_10X_SERVICE_BCN_FILTER,
 228        WMI_10X_SERVICE_RTT,
 229        WMI_10X_SERVICE_RATECTRL,
 230        WMI_10X_SERVICE_WOW,
 231        WMI_10X_SERVICE_RATECTRL_CACHE,
 232        WMI_10X_SERVICE_IRAM_TIDS,
 233        WMI_10X_SERVICE_BURST,
 234
 235        /* introduced in 10.2 */
 236        WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 237        WMI_10X_SERVICE_FORCE_FW_HANG,
 238        WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 239        WMI_10X_SERVICE_ATF,
 240        WMI_10X_SERVICE_COEX_GPIO,
 241        WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
 242        WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
 243        WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
 244        WMI_10X_SERVICE_MESH,
 245        WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
 246        WMI_10X_SERVICE_PEER_STATS,
 247        WMI_10X_SERVICE_RESET_CHIP,
 248        WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
 249        WMI_10X_SERVICE_VDEV_BCN_RATE_CONTROL,
 250        WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT,
 251        WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT,
 252};
 253
 254enum wmi_main_service {
 255        WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0,
 256        WMI_MAIN_SERVICE_SCAN_OFFLOAD,
 257        WMI_MAIN_SERVICE_ROAM_OFFLOAD,
 258        WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
 259        WMI_MAIN_SERVICE_STA_PWRSAVE,
 260        WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
 261        WMI_MAIN_SERVICE_AP_UAPSD,
 262        WMI_MAIN_SERVICE_AP_DFS,
 263        WMI_MAIN_SERVICE_11AC,
 264        WMI_MAIN_SERVICE_BLOCKACK,
 265        WMI_MAIN_SERVICE_PHYERR,
 266        WMI_MAIN_SERVICE_BCN_FILTER,
 267        WMI_MAIN_SERVICE_RTT,
 268        WMI_MAIN_SERVICE_RATECTRL,
 269        WMI_MAIN_SERVICE_WOW,
 270        WMI_MAIN_SERVICE_RATECTRL_CACHE,
 271        WMI_MAIN_SERVICE_IRAM_TIDS,
 272        WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
 273        WMI_MAIN_SERVICE_NLO,
 274        WMI_MAIN_SERVICE_GTK_OFFLOAD,
 275        WMI_MAIN_SERVICE_SCAN_SCH,
 276        WMI_MAIN_SERVICE_CSA_OFFLOAD,
 277        WMI_MAIN_SERVICE_CHATTER,
 278        WMI_MAIN_SERVICE_COEX_FREQAVOID,
 279        WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
 280        WMI_MAIN_SERVICE_FORCE_FW_HANG,
 281        WMI_MAIN_SERVICE_GPIO,
 282        WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
 283        WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 284        WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 285        WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
 286        WMI_MAIN_SERVICE_TX_ENCAP,
 287};
 288
 289enum wmi_10_4_service {
 290        WMI_10_4_SERVICE_BEACON_OFFLOAD = 0,
 291        WMI_10_4_SERVICE_SCAN_OFFLOAD,
 292        WMI_10_4_SERVICE_ROAM_OFFLOAD,
 293        WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
 294        WMI_10_4_SERVICE_STA_PWRSAVE,
 295        WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
 296        WMI_10_4_SERVICE_AP_UAPSD,
 297        WMI_10_4_SERVICE_AP_DFS,
 298        WMI_10_4_SERVICE_11AC,
 299        WMI_10_4_SERVICE_BLOCKACK,
 300        WMI_10_4_SERVICE_PHYERR,
 301        WMI_10_4_SERVICE_BCN_FILTER,
 302        WMI_10_4_SERVICE_RTT,
 303        WMI_10_4_SERVICE_RATECTRL,
 304        WMI_10_4_SERVICE_WOW,
 305        WMI_10_4_SERVICE_RATECTRL_CACHE,
 306        WMI_10_4_SERVICE_IRAM_TIDS,
 307        WMI_10_4_SERVICE_BURST,
 308        WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 309        WMI_10_4_SERVICE_GTK_OFFLOAD,
 310        WMI_10_4_SERVICE_SCAN_SCH,
 311        WMI_10_4_SERVICE_CSA_OFFLOAD,
 312        WMI_10_4_SERVICE_CHATTER,
 313        WMI_10_4_SERVICE_COEX_FREQAVOID,
 314        WMI_10_4_SERVICE_PACKET_POWER_SAVE,
 315        WMI_10_4_SERVICE_FORCE_FW_HANG,
 316        WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 317        WMI_10_4_SERVICE_GPIO,
 318        WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 319        WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 320        WMI_10_4_SERVICE_STA_KEEP_ALIVE,
 321        WMI_10_4_SERVICE_TX_ENCAP,
 322        WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
 323        WMI_10_4_SERVICE_EARLY_RX,
 324        WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
 325        WMI_10_4_SERVICE_TT,
 326        WMI_10_4_SERVICE_ATF,
 327        WMI_10_4_SERVICE_PEER_CACHING,
 328        WMI_10_4_SERVICE_COEX_GPIO,
 329        WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
 330        WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
 331        WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
 332        WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
 333        WMI_10_4_SERVICE_MESH_NON_11S,
 334        WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
 335        WMI_10_4_SERVICE_PEER_STATS,
 336        WMI_10_4_SERVICE_MESH_11S,
 337        WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
 338        WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
 339        WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
 340        WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
 341        WMI_10_4_SERVICE_VDEV_RX_FILTER,
 342        WMI_10_4_SERVICE_BTCOEX,
 343        WMI_10_4_SERVICE_CHECK_CAL_VERSION,
 344        WMI_10_4_SERVICE_DBGLOG_WARN2,
 345        WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE,
 346        WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT,
 347        WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT,
 348        WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT,
 349        WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT,
 350        WMI_10_4_SERVICE_TDLS,
 351        WMI_10_4_SERVICE_TDLS_OFFCHAN,
 352        WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA,
 353        WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA,
 354        WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
 355        WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
 356        WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH,
 357        WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
 358        WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT,
 359        WMI_10_4_SERVICE_TPC_STATS_FINAL,
 360        WMI_10_4_SERVICE_CFR_CAPTURE_SUPPORT,
 361        WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,
 362        WMI_10_4_SERVICE_CFR_CAPTURE_IND_MSG_TYPE_LEGACY,
 363        WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT,
 364        WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
 365        WMI_10_4_SERVICE_VDEV_BCN_RATE_CONTROL,
 366        WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
 367        WMI_10_4_SERVICE_HTT_ASSERT_TRIGGER_SUPPORT,
 368        WMI_10_4_SERVICE_VDEV_FILTER_NEIGHBOR_RX_PACKETS,
 369        WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
 370        WMI_10_4_SERVICE_PEER_CHWIDTH_CHANGE,
 371        WMI_10_4_SERVICE_RX_FILTER_OUT_COUNT,
 372        WMI_10_4_SERVICE_RTT_RESPONDER_ROLE,
 373        WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
 374        WMI_10_4_SERVICE_REPORT_AIRTIME,
 375        WMI_10_4_SERVICE_TX_PWR_PER_PEER,
 376        WMI_10_4_SERVICE_FETCH_PEER_TX_PN,
 377        WMI_10_4_SERVICE_MULTIPLE_VDEV_RESTART,
 378        WMI_10_4_SERVICE_ENHANCED_RADIO_COUNTERS,
 379        WMI_10_4_SERVICE_QINQ_SUPPORT,
 380        WMI_10_4_SERVICE_RESET_CHIP,
 381};
 382
 383static inline char *wmi_service_name(enum wmi_service service_id)
 384{
 385#define SVCSTR(x) case x: return #x
 386
 387        switch (service_id) {
 388        SVCSTR(WMI_SERVICE_BEACON_OFFLOAD);
 389        SVCSTR(WMI_SERVICE_SCAN_OFFLOAD);
 390        SVCSTR(WMI_SERVICE_ROAM_OFFLOAD);
 391        SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD);
 392        SVCSTR(WMI_SERVICE_STA_PWRSAVE);
 393        SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE);
 394        SVCSTR(WMI_SERVICE_AP_UAPSD);
 395        SVCSTR(WMI_SERVICE_AP_DFS);
 396        SVCSTR(WMI_SERVICE_11AC);
 397        SVCSTR(WMI_SERVICE_BLOCKACK);
 398        SVCSTR(WMI_SERVICE_PHYERR);
 399        SVCSTR(WMI_SERVICE_BCN_FILTER);
 400        SVCSTR(WMI_SERVICE_RTT);
 401        SVCSTR(WMI_SERVICE_RATECTRL);
 402        SVCSTR(WMI_SERVICE_WOW);
 403        SVCSTR(WMI_SERVICE_RATECTRL_CACHE);
 404        SVCSTR(WMI_SERVICE_IRAM_TIDS);
 405        SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD);
 406        SVCSTR(WMI_SERVICE_NLO);
 407        SVCSTR(WMI_SERVICE_GTK_OFFLOAD);
 408        SVCSTR(WMI_SERVICE_SCAN_SCH);
 409        SVCSTR(WMI_SERVICE_CSA_OFFLOAD);
 410        SVCSTR(WMI_SERVICE_CHATTER);
 411        SVCSTR(WMI_SERVICE_COEX_FREQAVOID);
 412        SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE);
 413        SVCSTR(WMI_SERVICE_FORCE_FW_HANG);
 414        SVCSTR(WMI_SERVICE_GPIO);
 415        SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM);
 416        SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG);
 417        SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG);
 418        SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE);
 419        SVCSTR(WMI_SERVICE_TX_ENCAP);
 420        SVCSTR(WMI_SERVICE_BURST);
 421        SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT);
 422        SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT);
 423        SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD);
 424        SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC);
 425        SVCSTR(WMI_SERVICE_EARLY_RX);
 426        SVCSTR(WMI_SERVICE_STA_SMPS);
 427        SVCSTR(WMI_SERVICE_FWTEST);
 428        SVCSTR(WMI_SERVICE_STA_WMMAC);
 429        SVCSTR(WMI_SERVICE_TDLS);
 430        SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE);
 431        SVCSTR(WMI_SERVICE_ADAPTIVE_OCS);
 432        SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT);
 433        SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE);
 434        SVCSTR(WMI_SERVICE_WLAN_HB);
 435        SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT);
 436        SVCSTR(WMI_SERVICE_BATCH_SCAN);
 437        SVCSTR(WMI_SERVICE_QPOWER);
 438        SVCSTR(WMI_SERVICE_PLMREQ);
 439        SVCSTR(WMI_SERVICE_THERMAL_MGMT);
 440        SVCSTR(WMI_SERVICE_RMC);
 441        SVCSTR(WMI_SERVICE_MHF_OFFLOAD);
 442        SVCSTR(WMI_SERVICE_COEX_SAR);
 443        SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE);
 444        SVCSTR(WMI_SERVICE_NAN);
 445        SVCSTR(WMI_SERVICE_L1SS_STAT);
 446        SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED);
 447        SVCSTR(WMI_SERVICE_OBSS_SCAN);
 448        SVCSTR(WMI_SERVICE_TDLS_OFFCHAN);
 449        SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA);
 450        SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA);
 451        SVCSTR(WMI_SERVICE_IBSS_PWRSAVE);
 452        SVCSTR(WMI_SERVICE_LPASS);
 453        SVCSTR(WMI_SERVICE_EXTSCAN);
 454        SVCSTR(WMI_SERVICE_D0WOW);
 455        SVCSTR(WMI_SERVICE_HSOFFLOAD);
 456        SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD);
 457        SVCSTR(WMI_SERVICE_RX_FULL_REORDER);
 458        SVCSTR(WMI_SERVICE_DHCP_OFFLOAD);
 459        SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT);
 460        SVCSTR(WMI_SERVICE_MDNS_OFFLOAD);
 461        SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD);
 462        SVCSTR(WMI_SERVICE_ATF);
 463        SVCSTR(WMI_SERVICE_COEX_GPIO);
 464        SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA);
 465        SVCSTR(WMI_SERVICE_TT);
 466        SVCSTR(WMI_SERVICE_PEER_CACHING);
 467        SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF);
 468        SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF);
 469        SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64);
 470        SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT);
 471        SVCSTR(WMI_SERVICE_MESH_11S);
 472        SVCSTR(WMI_SERVICE_MESH_NON_11S);
 473        SVCSTR(WMI_SERVICE_PEER_STATS);
 474        SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT);
 475        SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT);
 476        SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY);
 477        SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL);
 478        SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC);
 479        SVCSTR(WMI_SERVICE_VDEV_RX_FILTER);
 480        SVCSTR(WMI_SERVICE_BTCOEX);
 481        SVCSTR(WMI_SERVICE_CHECK_CAL_VERSION);
 482        SVCSTR(WMI_SERVICE_DBGLOG_WARN2);
 483        SVCSTR(WMI_SERVICE_BTCOEX_DUTY_CYCLE);
 484        SVCSTR(WMI_SERVICE_4_WIRE_COEX_SUPPORT);
 485        SVCSTR(WMI_SERVICE_EXTENDED_NSS_SUPPORT);
 486        SVCSTR(WMI_SERVICE_PROG_GPIO_BAND_SELECT);
 487        SVCSTR(WMI_SERVICE_SMART_LOGGING_SUPPORT);
 488        SVCSTR(WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE);
 489        SVCSTR(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY);
 490        SVCSTR(WMI_SERVICE_MGMT_TX_WMI);
 491        SVCSTR(WMI_SERVICE_TDLS_WIDER_BANDWIDTH);
 492        SVCSTR(WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS);
 493        SVCSTR(WMI_SERVICE_HOST_DFS_CHECK_SUPPORT);
 494        SVCSTR(WMI_SERVICE_TPC_STATS_FINAL);
 495        SVCSTR(WMI_SERVICE_RESET_CHIP);
 496        SVCSTR(WMI_SERVICE_SPOOF_MAC_SUPPORT);
 497        SVCSTR(WMI_SERVICE_TX_DATA_ACK_RSSI);
 498        SVCSTR(WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT);
 499        SVCSTR(WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT);
 500        SVCSTR(WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT);
 501        SVCSTR(WMI_SERVICE_THERM_THROT);
 502        SVCSTR(WMI_SERVICE_RTT_RESPONDER_ROLE);
 503        SVCSTR(WMI_SERVICE_PER_PACKET_SW_ENCRYPT);
 504        SVCSTR(WMI_SERVICE_REPORT_AIRTIME);
 505        SVCSTR(WMI_SERVICE_SYNC_DELETE_CMDS);
 506        SVCSTR(WMI_SERVICE_TX_PWR_PER_PEER);
 507        SVCSTR(WMI_SERVICE_SUPPORT_EXTEND_ADDRESS);
 508        SVCSTR(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT);
 509        SVCSTR(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT);
 510
 511        case WMI_SERVICE_MAX:
 512                return NULL;
 513        }
 514
 515#undef SVCSTR
 516
 517        return NULL;
 518}
 519
 520#define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
 521        ((svc_id) < (len) && \
 522         __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \
 523         BIT((svc_id) % (sizeof(u32))))
 524
 525/* This extension is required to accommodate new services, current limit
 526 * for wmi_services is 64 as target is using only 4-bits of each 32-bit
 527 * wmi_service word. Extending this to make use of remaining unused bits
 528 * for new services.
 529 */
 530#define WMI_EXT_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
 531        ((svc_id) >= (len) && \
 532        __le32_to_cpu((wmi_svc_bmap)[((svc_id) - (len)) / 28]) & \
 533        BIT(((((svc_id) - (len)) % 28) & 0x1f) + 4))
 534
 535#define SVCMAP(x, y, len) \
 536        do { \
 537                if ((WMI_SERVICE_IS_ENABLED((in), (x), (len))) || \
 538                    (WMI_EXT_SERVICE_IS_ENABLED((in), (x), (len)))) \
 539                        __set_bit(y, out); \
 540        } while (0)
 541
 542static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out,
 543                                   size_t len)
 544{
 545        SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD,
 546               WMI_SERVICE_BEACON_OFFLOAD, len);
 547        SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD,
 548               WMI_SERVICE_SCAN_OFFLOAD, len);
 549        SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD,
 550               WMI_SERVICE_ROAM_OFFLOAD, len);
 551        SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
 552               WMI_SERVICE_BCN_MISS_OFFLOAD, len);
 553        SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE,
 554               WMI_SERVICE_STA_PWRSAVE, len);
 555        SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
 556               WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
 557        SVCMAP(WMI_10X_SERVICE_AP_UAPSD,
 558               WMI_SERVICE_AP_UAPSD, len);
 559        SVCMAP(WMI_10X_SERVICE_AP_DFS,
 560               WMI_SERVICE_AP_DFS, len);
 561        SVCMAP(WMI_10X_SERVICE_11AC,
 562               WMI_SERVICE_11AC, len);
 563        SVCMAP(WMI_10X_SERVICE_BLOCKACK,
 564               WMI_SERVICE_BLOCKACK, len);
 565        SVCMAP(WMI_10X_SERVICE_PHYERR,
 566               WMI_SERVICE_PHYERR, len);
 567        SVCMAP(WMI_10X_SERVICE_BCN_FILTER,
 568               WMI_SERVICE_BCN_FILTER, len);
 569        SVCMAP(WMI_10X_SERVICE_RTT,
 570               WMI_SERVICE_RTT, len);
 571        SVCMAP(WMI_10X_SERVICE_RATECTRL,
 572               WMI_SERVICE_RATECTRL, len);
 573        SVCMAP(WMI_10X_SERVICE_WOW,
 574               WMI_SERVICE_WOW, len);
 575        SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE,
 576               WMI_SERVICE_RATECTRL_CACHE, len);
 577        SVCMAP(WMI_10X_SERVICE_IRAM_TIDS,
 578               WMI_SERVICE_IRAM_TIDS, len);
 579        SVCMAP(WMI_10X_SERVICE_BURST,
 580               WMI_SERVICE_BURST, len);
 581        SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 582               WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
 583        SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG,
 584               WMI_SERVICE_FORCE_FW_HANG, len);
 585        SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 586               WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
 587        SVCMAP(WMI_10X_SERVICE_ATF,
 588               WMI_SERVICE_ATF, len);
 589        SVCMAP(WMI_10X_SERVICE_COEX_GPIO,
 590               WMI_SERVICE_COEX_GPIO, len);
 591        SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
 592               WMI_SERVICE_AUX_SPECTRAL_INTF, len);
 593        SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
 594               WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
 595        SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
 596               WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
 597        SVCMAP(WMI_10X_SERVICE_MESH,
 598               WMI_SERVICE_MESH_11S, len);
 599        SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
 600               WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
 601        SVCMAP(WMI_10X_SERVICE_PEER_STATS,
 602               WMI_SERVICE_PEER_STATS, len);
 603        SVCMAP(WMI_10X_SERVICE_RESET_CHIP,
 604               WMI_SERVICE_RESET_CHIP, len);
 605        SVCMAP(WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
 606               WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len);
 607        SVCMAP(WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT,
 608               WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT, len);
 609        SVCMAP(WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT,
 610               WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len);
 611}
 612
 613static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out,
 614                                    size_t len)
 615{
 616        SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD,
 617               WMI_SERVICE_BEACON_OFFLOAD, len);
 618        SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD,
 619               WMI_SERVICE_SCAN_OFFLOAD, len);
 620        SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD,
 621               WMI_SERVICE_ROAM_OFFLOAD, len);
 622        SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
 623               WMI_SERVICE_BCN_MISS_OFFLOAD, len);
 624        SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE,
 625               WMI_SERVICE_STA_PWRSAVE, len);
 626        SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
 627               WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
 628        SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD,
 629               WMI_SERVICE_AP_UAPSD, len);
 630        SVCMAP(WMI_MAIN_SERVICE_AP_DFS,
 631               WMI_SERVICE_AP_DFS, len);
 632        SVCMAP(WMI_MAIN_SERVICE_11AC,
 633               WMI_SERVICE_11AC, len);
 634        SVCMAP(WMI_MAIN_SERVICE_BLOCKACK,
 635               WMI_SERVICE_BLOCKACK, len);
 636        SVCMAP(WMI_MAIN_SERVICE_PHYERR,
 637               WMI_SERVICE_PHYERR, len);
 638        SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER,
 639               WMI_SERVICE_BCN_FILTER, len);
 640        SVCMAP(WMI_MAIN_SERVICE_RTT,
 641               WMI_SERVICE_RTT, len);
 642        SVCMAP(WMI_MAIN_SERVICE_RATECTRL,
 643               WMI_SERVICE_RATECTRL, len);
 644        SVCMAP(WMI_MAIN_SERVICE_WOW,
 645               WMI_SERVICE_WOW, len);
 646        SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE,
 647               WMI_SERVICE_RATECTRL_CACHE, len);
 648        SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS,
 649               WMI_SERVICE_IRAM_TIDS, len);
 650        SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
 651               WMI_SERVICE_ARPNS_OFFLOAD, len);
 652        SVCMAP(WMI_MAIN_SERVICE_NLO,
 653               WMI_SERVICE_NLO, len);
 654        SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD,
 655               WMI_SERVICE_GTK_OFFLOAD, len);
 656        SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH,
 657               WMI_SERVICE_SCAN_SCH, len);
 658        SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD,
 659               WMI_SERVICE_CSA_OFFLOAD, len);
 660        SVCMAP(WMI_MAIN_SERVICE_CHATTER,
 661               WMI_SERVICE_CHATTER, len);
 662        SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID,
 663               WMI_SERVICE_COEX_FREQAVOID, len);
 664        SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
 665               WMI_SERVICE_PACKET_POWER_SAVE, len);
 666        SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG,
 667               WMI_SERVICE_FORCE_FW_HANG, len);
 668        SVCMAP(WMI_MAIN_SERVICE_GPIO,
 669               WMI_SERVICE_GPIO, len);
 670        SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
 671               WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len);
 672        SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 673               WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
 674        SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 675               WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
 676        SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
 677               WMI_SERVICE_STA_KEEP_ALIVE, len);
 678        SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP,
 679               WMI_SERVICE_TX_ENCAP, len);
 680}
 681
 682static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
 683                                    size_t len)
 684{
 685        SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD,
 686               WMI_SERVICE_BEACON_OFFLOAD, len);
 687        SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD,
 688               WMI_SERVICE_SCAN_OFFLOAD, len);
 689        SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD,
 690               WMI_SERVICE_ROAM_OFFLOAD, len);
 691        SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
 692               WMI_SERVICE_BCN_MISS_OFFLOAD, len);
 693        SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE,
 694               WMI_SERVICE_STA_PWRSAVE, len);
 695        SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
 696               WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
 697        SVCMAP(WMI_10_4_SERVICE_AP_UAPSD,
 698               WMI_SERVICE_AP_UAPSD, len);
 699        SVCMAP(WMI_10_4_SERVICE_AP_DFS,
 700               WMI_SERVICE_AP_DFS, len);
 701        SVCMAP(WMI_10_4_SERVICE_11AC,
 702               WMI_SERVICE_11AC, len);
 703        SVCMAP(WMI_10_4_SERVICE_BLOCKACK,
 704               WMI_SERVICE_BLOCKACK, len);
 705        SVCMAP(WMI_10_4_SERVICE_PHYERR,
 706               WMI_SERVICE_PHYERR, len);
 707        SVCMAP(WMI_10_4_SERVICE_BCN_FILTER,
 708               WMI_SERVICE_BCN_FILTER, len);
 709        SVCMAP(WMI_10_4_SERVICE_RTT,
 710               WMI_SERVICE_RTT, len);
 711        SVCMAP(WMI_10_4_SERVICE_RATECTRL,
 712               WMI_SERVICE_RATECTRL, len);
 713        SVCMAP(WMI_10_4_SERVICE_WOW,
 714               WMI_SERVICE_WOW, len);
 715        SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE,
 716               WMI_SERVICE_RATECTRL_CACHE, len);
 717        SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS,
 718               WMI_SERVICE_IRAM_TIDS, len);
 719        SVCMAP(WMI_10_4_SERVICE_BURST,
 720               WMI_SERVICE_BURST, len);
 721        SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 722               WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
 723        SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD,
 724               WMI_SERVICE_GTK_OFFLOAD, len);
 725        SVCMAP(WMI_10_4_SERVICE_SCAN_SCH,
 726               WMI_SERVICE_SCAN_SCH, len);
 727        SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD,
 728               WMI_SERVICE_CSA_OFFLOAD, len);
 729        SVCMAP(WMI_10_4_SERVICE_CHATTER,
 730               WMI_SERVICE_CHATTER, len);
 731        SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID,
 732               WMI_SERVICE_COEX_FREQAVOID, len);
 733        SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE,
 734               WMI_SERVICE_PACKET_POWER_SAVE, len);
 735        SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG,
 736               WMI_SERVICE_FORCE_FW_HANG, len);
 737        SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 738               WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
 739        SVCMAP(WMI_10_4_SERVICE_GPIO,
 740               WMI_SERVICE_GPIO, len);
 741        SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 742               WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
 743        SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 744               WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
 745        SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE,
 746               WMI_SERVICE_STA_KEEP_ALIVE, len);
 747        SVCMAP(WMI_10_4_SERVICE_TX_ENCAP,
 748               WMI_SERVICE_TX_ENCAP, len);
 749        SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
 750               WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len);
 751        SVCMAP(WMI_10_4_SERVICE_EARLY_RX,
 752               WMI_SERVICE_EARLY_RX, len);
 753        SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
 754               WMI_SERVICE_ENHANCED_PROXY_STA, len);
 755        SVCMAP(WMI_10_4_SERVICE_TT,
 756               WMI_SERVICE_TT, len);
 757        SVCMAP(WMI_10_4_SERVICE_ATF,
 758               WMI_SERVICE_ATF, len);
 759        SVCMAP(WMI_10_4_SERVICE_PEER_CACHING,
 760               WMI_SERVICE_PEER_CACHING, len);
 761        SVCMAP(WMI_10_4_SERVICE_COEX_GPIO,
 762               WMI_SERVICE_COEX_GPIO, len);
 763        SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
 764               WMI_SERVICE_AUX_SPECTRAL_INTF, len);
 765        SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
 766               WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
 767        SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
 768               WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
 769        SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
 770               WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
 771        SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S,
 772               WMI_SERVICE_MESH_NON_11S, len);
 773        SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
 774               WMI_SERVICE_RESTRT_CHNL_SUPPORT, len);
 775        SVCMAP(WMI_10_4_SERVICE_PEER_STATS,
 776               WMI_SERVICE_PEER_STATS, len);
 777        SVCMAP(WMI_10_4_SERVICE_MESH_11S,
 778               WMI_SERVICE_MESH_11S, len);
 779        SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
 780               WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len);
 781        SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
 782               WMI_SERVICE_TX_MODE_PUSH_ONLY, len);
 783        SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
 784               WMI_SERVICE_TX_MODE_PUSH_PULL, len);
 785        SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
 786               WMI_SERVICE_TX_MODE_DYNAMIC, len);
 787        SVCMAP(WMI_10_4_SERVICE_VDEV_RX_FILTER,
 788               WMI_SERVICE_VDEV_RX_FILTER, len);
 789        SVCMAP(WMI_10_4_SERVICE_BTCOEX,
 790               WMI_SERVICE_BTCOEX, len);
 791        SVCMAP(WMI_10_4_SERVICE_CHECK_CAL_VERSION,
 792               WMI_SERVICE_CHECK_CAL_VERSION, len);
 793        SVCMAP(WMI_10_4_SERVICE_DBGLOG_WARN2,
 794               WMI_SERVICE_DBGLOG_WARN2, len);
 795        SVCMAP(WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE,
 796               WMI_SERVICE_BTCOEX_DUTY_CYCLE, len);
 797        SVCMAP(WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT,
 798               WMI_SERVICE_4_WIRE_COEX_SUPPORT, len);
 799        SVCMAP(WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT,
 800               WMI_SERVICE_EXTENDED_NSS_SUPPORT, len);
 801        SVCMAP(WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT,
 802               WMI_SERVICE_PROG_GPIO_BAND_SELECT, len);
 803        SVCMAP(WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT,
 804               WMI_SERVICE_SMART_LOGGING_SUPPORT, len);
 805        SVCMAP(WMI_10_4_SERVICE_TDLS,
 806               WMI_SERVICE_TDLS, len);
 807        SVCMAP(WMI_10_4_SERVICE_TDLS_OFFCHAN,
 808               WMI_SERVICE_TDLS_OFFCHAN, len);
 809        SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA,
 810               WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, len);
 811        SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA,
 812               WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, len);
 813        SVCMAP(WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
 814               WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, len);
 815        SVCMAP(WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
 816               WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, len);
 817        SVCMAP(WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH,
 818               WMI_SERVICE_TDLS_WIDER_BANDWIDTH, len);
 819        SVCMAP(WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
 820               WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len);
 821        SVCMAP(WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT,
 822               WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, len);
 823        SVCMAP(WMI_10_4_SERVICE_TPC_STATS_FINAL,
 824               WMI_SERVICE_TPC_STATS_FINAL, len);
 825        SVCMAP(WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,
 826               WMI_SERVICE_TX_DATA_ACK_RSSI, len);
 827        SVCMAP(WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
 828               WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, len);
 829        SVCMAP(WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
 830               WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, len);
 831        SVCMAP(WMI_10_4_SERVICE_RTT_RESPONDER_ROLE,
 832               WMI_SERVICE_RTT_RESPONDER_ROLE, len);
 833        SVCMAP(WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT,
 834               WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len);
 835        SVCMAP(WMI_10_4_SERVICE_REPORT_AIRTIME,
 836               WMI_SERVICE_REPORT_AIRTIME, len);
 837        SVCMAP(WMI_10_4_SERVICE_TX_PWR_PER_PEER,
 838               WMI_SERVICE_TX_PWR_PER_PEER, len);
 839        SVCMAP(WMI_10_4_SERVICE_RESET_CHIP,
 840               WMI_SERVICE_RESET_CHIP, len);
 841        SVCMAP(WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
 842               WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
 843        SVCMAP(WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
 844               WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
 845}
 846
 847#undef SVCMAP
 848
 849/* 2 word representation of MAC addr */
 850struct wmi_mac_addr {
 851        union {
 852                u8 addr[6];
 853                struct {
 854                        u32 word0;
 855                        u32 word1;
 856                } __packed;
 857        } __packed;
 858} __packed;
 859
 860struct wmi_cmd_map {
 861        u32 init_cmdid;
 862        u32 start_scan_cmdid;
 863        u32 stop_scan_cmdid;
 864        u32 scan_chan_list_cmdid;
 865        u32 scan_sch_prio_tbl_cmdid;
 866        u32 scan_prob_req_oui_cmdid;
 867        u32 pdev_set_regdomain_cmdid;
 868        u32 pdev_set_channel_cmdid;
 869        u32 pdev_set_param_cmdid;
 870        u32 pdev_pktlog_enable_cmdid;
 871        u32 pdev_pktlog_disable_cmdid;
 872        u32 pdev_set_wmm_params_cmdid;
 873        u32 pdev_set_ht_cap_ie_cmdid;
 874        u32 pdev_set_vht_cap_ie_cmdid;
 875        u32 pdev_set_dscp_tid_map_cmdid;
 876        u32 pdev_set_quiet_mode_cmdid;
 877        u32 pdev_green_ap_ps_enable_cmdid;
 878        u32 pdev_get_tpc_config_cmdid;
 879        u32 pdev_set_base_macaddr_cmdid;
 880        u32 vdev_create_cmdid;
 881        u32 vdev_delete_cmdid;
 882        u32 vdev_start_request_cmdid;
 883        u32 vdev_restart_request_cmdid;
 884        u32 vdev_up_cmdid;
 885        u32 vdev_stop_cmdid;
 886        u32 vdev_down_cmdid;
 887        u32 vdev_set_param_cmdid;
 888        u32 vdev_install_key_cmdid;
 889        u32 peer_create_cmdid;
 890        u32 peer_delete_cmdid;
 891        u32 peer_flush_tids_cmdid;
 892        u32 peer_set_param_cmdid;
 893        u32 peer_assoc_cmdid;
 894        u32 peer_add_wds_entry_cmdid;
 895        u32 peer_remove_wds_entry_cmdid;
 896        u32 peer_mcast_group_cmdid;
 897        u32 bcn_tx_cmdid;
 898        u32 pdev_send_bcn_cmdid;
 899        u32 bcn_tmpl_cmdid;
 900        u32 bcn_filter_rx_cmdid;
 901        u32 prb_req_filter_rx_cmdid;
 902        u32 mgmt_tx_cmdid;
 903        u32 mgmt_tx_send_cmdid;
 904        u32 prb_tmpl_cmdid;
 905        u32 addba_clear_resp_cmdid;
 906        u32 addba_send_cmdid;
 907        u32 addba_status_cmdid;
 908        u32 delba_send_cmdid;
 909        u32 addba_set_resp_cmdid;
 910        u32 send_singleamsdu_cmdid;
 911        u32 sta_powersave_mode_cmdid;
 912        u32 sta_powersave_param_cmdid;
 913        u32 sta_mimo_ps_mode_cmdid;
 914        u32 pdev_dfs_enable_cmdid;
 915        u32 pdev_dfs_disable_cmdid;
 916        u32 roam_scan_mode;
 917        u32 roam_scan_rssi_threshold;
 918        u32 roam_scan_period;
 919        u32 roam_scan_rssi_change_threshold;
 920        u32 roam_ap_profile;
 921        u32 ofl_scan_add_ap_profile;
 922        u32 ofl_scan_remove_ap_profile;
 923        u32 ofl_scan_period;
 924        u32 p2p_dev_set_device_info;
 925        u32 p2p_dev_set_discoverability;
 926        u32 p2p_go_set_beacon_ie;
 927        u32 p2p_go_set_probe_resp_ie;
 928        u32 p2p_set_vendor_ie_data_cmdid;
 929        u32 ap_ps_peer_param_cmdid;
 930        u32 ap_ps_peer_uapsd_coex_cmdid;
 931        u32 peer_rate_retry_sched_cmdid;
 932        u32 wlan_profile_trigger_cmdid;
 933        u32 wlan_profile_set_hist_intvl_cmdid;
 934        u32 wlan_profile_get_profile_data_cmdid;
 935        u32 wlan_profile_enable_profile_id_cmdid;
 936        u32 wlan_profile_list_profile_id_cmdid;
 937        u32 pdev_suspend_cmdid;
 938        u32 pdev_resume_cmdid;
 939        u32 add_bcn_filter_cmdid;
 940        u32 rmv_bcn_filter_cmdid;
 941        u32 wow_add_wake_pattern_cmdid;
 942        u32 wow_del_wake_pattern_cmdid;
 943        u32 wow_enable_disable_wake_event_cmdid;
 944        u32 wow_enable_cmdid;
 945        u32 wow_hostwakeup_from_sleep_cmdid;
 946        u32 rtt_measreq_cmdid;
 947        u32 rtt_tsf_cmdid;
 948        u32 vdev_spectral_scan_configure_cmdid;
 949        u32 vdev_spectral_scan_enable_cmdid;
 950        u32 request_stats_cmdid;
 951        u32 request_peer_stats_info_cmdid;
 952        u32 set_arp_ns_offload_cmdid;
 953        u32 network_list_offload_config_cmdid;
 954        u32 gtk_offload_cmdid;
 955        u32 csa_offload_enable_cmdid;
 956        u32 csa_offload_chanswitch_cmdid;
 957        u32 chatter_set_mode_cmdid;
 958        u32 peer_tid_addba_cmdid;
 959        u32 peer_tid_delba_cmdid;
 960        u32 sta_dtim_ps_method_cmdid;
 961        u32 sta_uapsd_auto_trig_cmdid;
 962        u32 sta_keepalive_cmd;
 963        u32 echo_cmdid;
 964        u32 pdev_utf_cmdid;
 965        u32 dbglog_cfg_cmdid;
 966        u32 pdev_qvit_cmdid;
 967        u32 pdev_ftm_intg_cmdid;
 968        u32 vdev_set_keepalive_cmdid;
 969        u32 vdev_get_keepalive_cmdid;
 970        u32 force_fw_hang_cmdid;
 971        u32 gpio_config_cmdid;
 972        u32 gpio_output_cmdid;
 973        u32 pdev_get_temperature_cmdid;
 974        u32 vdev_set_wmm_params_cmdid;
 975        u32 tdls_set_state_cmdid;
 976        u32 tdls_peer_update_cmdid;
 977        u32 adaptive_qcs_cmdid;
 978        u32 scan_update_request_cmdid;
 979        u32 vdev_standby_response_cmdid;
 980        u32 vdev_resume_response_cmdid;
 981        u32 wlan_peer_caching_add_peer_cmdid;
 982        u32 wlan_peer_caching_evict_peer_cmdid;
 983        u32 wlan_peer_caching_restore_peer_cmdid;
 984        u32 wlan_peer_caching_print_all_peers_info_cmdid;
 985        u32 peer_update_wds_entry_cmdid;
 986        u32 peer_add_proxy_sta_entry_cmdid;
 987        u32 rtt_keepalive_cmdid;
 988        u32 oem_req_cmdid;
 989        u32 nan_cmdid;
 990        u32 vdev_ratemask_cmdid;
 991        u32 qboost_cfg_cmdid;
 992        u32 pdev_smart_ant_enable_cmdid;
 993        u32 pdev_smart_ant_set_rx_antenna_cmdid;
 994        u32 peer_smart_ant_set_tx_antenna_cmdid;
 995        u32 peer_smart_ant_set_train_info_cmdid;
 996        u32 peer_smart_ant_set_node_config_ops_cmdid;
 997        u32 pdev_set_antenna_switch_table_cmdid;
 998        u32 pdev_set_ctl_table_cmdid;
 999        u32 pdev_set_mimogain_table_cmdid;
1000        u32 pdev_ratepwr_table_cmdid;
1001        u32 pdev_ratepwr_chainmsk_table_cmdid;
1002        u32 pdev_fips_cmdid;
1003        u32 tt_set_conf_cmdid;
1004        u32 fwtest_cmdid;
1005        u32 vdev_atf_request_cmdid;
1006        u32 peer_atf_request_cmdid;
1007        u32 pdev_get_ani_cck_config_cmdid;
1008        u32 pdev_get_ani_ofdm_config_cmdid;
1009        u32 pdev_reserve_ast_entry_cmdid;
1010        u32 pdev_get_nfcal_power_cmdid;
1011        u32 pdev_get_tpc_cmdid;
1012        u32 pdev_get_ast_info_cmdid;
1013        u32 vdev_set_dscp_tid_map_cmdid;
1014        u32 pdev_get_info_cmdid;
1015        u32 vdev_get_info_cmdid;
1016        u32 vdev_filter_neighbor_rx_packets_cmdid;
1017        u32 mu_cal_start_cmdid;
1018        u32 set_cca_params_cmdid;
1019        u32 pdev_bss_chan_info_request_cmdid;
1020        u32 pdev_enable_adaptive_cca_cmdid;
1021        u32 ext_resource_cfg_cmdid;
1022        u32 vdev_set_ie_cmdid;
1023        u32 set_lteu_config_cmdid;
1024        u32 atf_ssid_grouping_request_cmdid;
1025        u32 peer_atf_ext_request_cmdid;
1026        u32 set_periodic_channel_stats_cfg_cmdid;
1027        u32 peer_bwf_request_cmdid;
1028        u32 btcoex_cfg_cmdid;
1029        u32 peer_tx_mu_txmit_count_cmdid;
1030        u32 peer_tx_mu_txmit_rstcnt_cmdid;
1031        u32 peer_gid_userpos_list_cmdid;
1032        u32 pdev_check_cal_version_cmdid;
1033        u32 coex_version_cfg_cmid;
1034        u32 pdev_get_rx_filter_cmdid;
1035        u32 pdev_extended_nss_cfg_cmdid;
1036        u32 vdev_set_scan_nac_rssi_cmdid;
1037        u32 prog_gpio_band_select_cmdid;
1038        u32 config_smart_logging_cmdid;
1039        u32 debug_fatal_condition_cmdid;
1040        u32 get_tsf_timer_cmdid;
1041        u32 pdev_get_tpc_table_cmdid;
1042        u32 vdev_sifs_trigger_time_cmdid;
1043        u32 pdev_wds_entry_list_cmdid;
1044        u32 tdls_set_offchan_mode_cmdid;
1045        u32 radar_found_cmdid;
1046        u32 set_bb_timing_cmdid;
1047        u32 per_peer_per_tid_config_cmdid;
1048};
1049
1050/*
1051 * wmi command groups.
1052 */
1053enum wmi_cmd_group {
1054        /* 0 to 2 are reserved */
1055        WMI_GRP_START = 0x3,
1056        WMI_GRP_SCAN = WMI_GRP_START,
1057        WMI_GRP_PDEV,
1058        WMI_GRP_VDEV,
1059        WMI_GRP_PEER,
1060        WMI_GRP_MGMT,
1061        WMI_GRP_BA_NEG,
1062        WMI_GRP_STA_PS,
1063        WMI_GRP_DFS,
1064        WMI_GRP_ROAM,
1065        WMI_GRP_OFL_SCAN,
1066        WMI_GRP_P2P,
1067        WMI_GRP_AP_PS,
1068        WMI_GRP_RATE_CTRL,
1069        WMI_GRP_PROFILE,
1070        WMI_GRP_SUSPEND,
1071        WMI_GRP_BCN_FILTER,
1072        WMI_GRP_WOW,
1073        WMI_GRP_RTT,
1074        WMI_GRP_SPECTRAL,
1075        WMI_GRP_STATS,
1076        WMI_GRP_ARP_NS_OFL,
1077        WMI_GRP_NLO_OFL,
1078        WMI_GRP_GTK_OFL,
1079        WMI_GRP_CSA_OFL,
1080        WMI_GRP_CHATTER,
1081        WMI_GRP_TID_ADDBA,
1082        WMI_GRP_MISC,
1083        WMI_GRP_GPIO,
1084};
1085
1086#define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1)
1087#define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1)
1088
1089#define WMI_CMD_UNSUPPORTED 0
1090
1091/* Command IDs and command events for MAIN FW. */
1092enum wmi_cmd_id {
1093        WMI_INIT_CMDID = 0x1,
1094
1095        /* Scan specific commands */
1096        WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN),
1097        WMI_STOP_SCAN_CMDID,
1098        WMI_SCAN_CHAN_LIST_CMDID,
1099        WMI_SCAN_SCH_PRIO_TBL_CMDID,
1100
1101        /* PDEV (physical device) specific commands */
1102        WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV),
1103        WMI_PDEV_SET_CHANNEL_CMDID,
1104        WMI_PDEV_SET_PARAM_CMDID,
1105        WMI_PDEV_PKTLOG_ENABLE_CMDID,
1106        WMI_PDEV_PKTLOG_DISABLE_CMDID,
1107        WMI_PDEV_SET_WMM_PARAMS_CMDID,
1108        WMI_PDEV_SET_HT_CAP_IE_CMDID,
1109        WMI_PDEV_SET_VHT_CAP_IE_CMDID,
1110        WMI_PDEV_SET_DSCP_TID_MAP_CMDID,
1111        WMI_PDEV_SET_QUIET_MODE_CMDID,
1112        WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1113        WMI_PDEV_GET_TPC_CONFIG_CMDID,
1114        WMI_PDEV_SET_BASE_MACADDR_CMDID,
1115
1116        /* VDEV (virtual device) specific commands */
1117        WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV),
1118        WMI_VDEV_DELETE_CMDID,
1119        WMI_VDEV_START_REQUEST_CMDID,
1120        WMI_VDEV_RESTART_REQUEST_CMDID,
1121        WMI_VDEV_UP_CMDID,
1122        WMI_VDEV_STOP_CMDID,
1123        WMI_VDEV_DOWN_CMDID,
1124        WMI_VDEV_SET_PARAM_CMDID,
1125        WMI_VDEV_INSTALL_KEY_CMDID,
1126
1127        /* peer specific commands */
1128        WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER),
1129        WMI_PEER_DELETE_CMDID,
1130        WMI_PEER_FLUSH_TIDS_CMDID,
1131        WMI_PEER_SET_PARAM_CMDID,
1132        WMI_PEER_ASSOC_CMDID,
1133        WMI_PEER_ADD_WDS_ENTRY_CMDID,
1134        WMI_PEER_REMOVE_WDS_ENTRY_CMDID,
1135        WMI_PEER_MCAST_GROUP_CMDID,
1136
1137        /* beacon/management specific commands */
1138        WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT),
1139        WMI_PDEV_SEND_BCN_CMDID,
1140        WMI_BCN_TMPL_CMDID,
1141        WMI_BCN_FILTER_RX_CMDID,
1142        WMI_PRB_REQ_FILTER_RX_CMDID,
1143        WMI_MGMT_TX_CMDID,
1144        WMI_PRB_TMPL_CMDID,
1145
1146        /* commands to directly control BA negotiation directly from host. */
1147        WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG),
1148        WMI_ADDBA_SEND_CMDID,
1149        WMI_ADDBA_STATUS_CMDID,
1150        WMI_DELBA_SEND_CMDID,
1151        WMI_ADDBA_SET_RESP_CMDID,
1152        WMI_SEND_SINGLEAMSDU_CMDID,
1153
1154        /* Station power save specific config */
1155        WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS),
1156        WMI_STA_POWERSAVE_PARAM_CMDID,
1157        WMI_STA_MIMO_PS_MODE_CMDID,
1158
1159        /** DFS-specific commands */
1160        WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS),
1161        WMI_PDEV_DFS_DISABLE_CMDID,
1162
1163        /* Roaming specific  commands */
1164        WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM),
1165        WMI_ROAM_SCAN_RSSI_THRESHOLD,
1166        WMI_ROAM_SCAN_PERIOD,
1167        WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1168        WMI_ROAM_AP_PROFILE,
1169
1170        /* offload scan specific commands */
1171        WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN),
1172        WMI_OFL_SCAN_REMOVE_AP_PROFILE,
1173        WMI_OFL_SCAN_PERIOD,
1174
1175        /* P2P specific commands */
1176        WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P),
1177        WMI_P2P_DEV_SET_DISCOVERABILITY,
1178        WMI_P2P_GO_SET_BEACON_IE,
1179        WMI_P2P_GO_SET_PROBE_RESP_IE,
1180        WMI_P2P_SET_VENDOR_IE_DATA_CMDID,
1181
1182        /* AP power save specific config */
1183        WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS),
1184        WMI_AP_PS_PEER_UAPSD_COEX_CMDID,
1185
1186        /* Rate-control specific commands */
1187        WMI_PEER_RATE_RETRY_SCHED_CMDID =
1188        WMI_CMD_GRP(WMI_GRP_RATE_CTRL),
1189
1190        /* WLAN Profiling commands. */
1191        WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE),
1192        WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1193        WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1194        WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1195        WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1196
1197        /* Suspend resume command Ids */
1198        WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND),
1199        WMI_PDEV_RESUME_CMDID,
1200
1201        /* Beacon filter commands */
1202        WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER),
1203        WMI_RMV_BCN_FILTER_CMDID,
1204
1205        /* WOW Specific WMI commands*/
1206        WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW),
1207        WMI_WOW_DEL_WAKE_PATTERN_CMDID,
1208        WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1209        WMI_WOW_ENABLE_CMDID,
1210        WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1211
1212        /* RTT measurement related cmd */
1213        WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT),
1214        WMI_RTT_TSF_CMDID,
1215
1216        /* spectral scan commands */
1217        WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL),
1218        WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1219
1220        /* F/W stats */
1221        WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS),
1222
1223        /* ARP OFFLOAD REQUEST*/
1224        WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL),
1225
1226        /* NS offload confid*/
1227        WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL),
1228
1229        /* GTK offload Specific WMI commands*/
1230        WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL),
1231
1232        /* CSA offload Specific WMI commands*/
1233        WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL),
1234        WMI_CSA_OFFLOAD_CHANSWITCH_CMDID,
1235
1236        /* Chatter commands*/
1237        WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER),
1238
1239        /* addba specific commands */
1240        WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA),
1241        WMI_PEER_TID_DELBA_CMDID,
1242
1243        /* set station mimo powersave method */
1244        WMI_STA_DTIM_PS_METHOD_CMDID,
1245        /* Configure the Station UAPSD AC Auto Trigger Parameters */
1246        WMI_STA_UAPSD_AUTO_TRIG_CMDID,
1247
1248        /* STA Keep alive parameter configuration,
1249         * Requires WMI_SERVICE_STA_KEEP_ALIVE
1250         */
1251        WMI_STA_KEEPALIVE_CMD,
1252
1253        /* misc command group */
1254        WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC),
1255        WMI_PDEV_UTF_CMDID,
1256        WMI_DBGLOG_CFG_CMDID,
1257        WMI_PDEV_QVIT_CMDID,
1258        WMI_PDEV_FTM_INTG_CMDID,
1259        WMI_VDEV_SET_KEEPALIVE_CMDID,
1260        WMI_VDEV_GET_KEEPALIVE_CMDID,
1261        WMI_FORCE_FW_HANG_CMDID,
1262
1263        /* GPIO Configuration */
1264        WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO),
1265        WMI_GPIO_OUTPUT_CMDID,
1266};
1267
1268enum wmi_event_id {
1269        WMI_SERVICE_READY_EVENTID = 0x1,
1270        WMI_READY_EVENTID,
1271        WMI_SERVICE_AVAILABLE_EVENTID,
1272
1273        /* Scan specific events */
1274        WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN),
1275
1276        /* PDEV specific events */
1277        WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV),
1278        WMI_CHAN_INFO_EVENTID,
1279        WMI_PHYERR_EVENTID,
1280
1281        /* VDEV specific events */
1282        WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV),
1283        WMI_VDEV_STOPPED_EVENTID,
1284        WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID,
1285
1286        /* peer specific events */
1287        WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER),
1288
1289        /* beacon/mgmt specific events */
1290        WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT),
1291        WMI_HOST_SWBA_EVENTID,
1292        WMI_TBTTOFFSET_UPDATE_EVENTID,
1293
1294        /* ADDBA Related WMI Events*/
1295        WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG),
1296        WMI_TX_ADDBA_COMPLETE_EVENTID,
1297
1298        /* Roam event to trigger roaming on host */
1299        WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM),
1300        WMI_PROFILE_MATCH,
1301
1302        /* WoW */
1303        WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW),
1304
1305        /* RTT */
1306        WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT),
1307        WMI_TSF_MEASUREMENT_REPORT_EVENTID,
1308        WMI_RTT_ERROR_REPORT_EVENTID,
1309
1310        /* GTK offload */
1311        WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL),
1312        WMI_GTK_REKEY_FAIL_EVENTID,
1313
1314        /* CSA IE received event */
1315        WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL),
1316
1317        /* Misc events */
1318        WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC),
1319        WMI_PDEV_UTF_EVENTID,
1320        WMI_DEBUG_MESG_EVENTID,
1321        WMI_UPDATE_STATS_EVENTID,
1322        WMI_DEBUG_PRINT_EVENTID,
1323        WMI_DCS_INTERFERENCE_EVENTID,
1324        WMI_PDEV_QVIT_EVENTID,
1325        WMI_WLAN_PROFILE_DATA_EVENTID,
1326        WMI_PDEV_FTM_INTG_EVENTID,
1327        WMI_WLAN_FREQ_AVOID_EVENTID,
1328        WMI_VDEV_GET_KEEPALIVE_EVENTID,
1329
1330        /* GPIO Event */
1331        WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO),
1332};
1333
1334/* Command IDs and command events for 10.X firmware */
1335enum wmi_10x_cmd_id {
1336        WMI_10X_START_CMDID = 0x9000,
1337        WMI_10X_END_CMDID = 0x9FFF,
1338
1339        /* initialize the wlan sub system */
1340        WMI_10X_INIT_CMDID,
1341
1342        /* Scan specific commands */
1343
1344        WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID,
1345        WMI_10X_STOP_SCAN_CMDID,
1346        WMI_10X_SCAN_CHAN_LIST_CMDID,
1347        WMI_10X_ECHO_CMDID,
1348
1349        /* PDEV(physical device) specific commands */
1350        WMI_10X_PDEV_SET_REGDOMAIN_CMDID,
1351        WMI_10X_PDEV_SET_CHANNEL_CMDID,
1352        WMI_10X_PDEV_SET_PARAM_CMDID,
1353        WMI_10X_PDEV_PKTLOG_ENABLE_CMDID,
1354        WMI_10X_PDEV_PKTLOG_DISABLE_CMDID,
1355        WMI_10X_PDEV_SET_WMM_PARAMS_CMDID,
1356        WMI_10X_PDEV_SET_HT_CAP_IE_CMDID,
1357        WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID,
1358        WMI_10X_PDEV_SET_BASE_MACADDR_CMDID,
1359        WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID,
1360        WMI_10X_PDEV_SET_QUIET_MODE_CMDID,
1361        WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1362        WMI_10X_PDEV_GET_TPC_CONFIG_CMDID,
1363
1364        /* VDEV(virtual device) specific commands */
1365        WMI_10X_VDEV_CREATE_CMDID,
1366        WMI_10X_VDEV_DELETE_CMDID,
1367        WMI_10X_VDEV_START_REQUEST_CMDID,
1368        WMI_10X_VDEV_RESTART_REQUEST_CMDID,
1369        WMI_10X_VDEV_UP_CMDID,
1370        WMI_10X_VDEV_STOP_CMDID,
1371        WMI_10X_VDEV_DOWN_CMDID,
1372        WMI_10X_VDEV_STANDBY_RESPONSE_CMDID,
1373        WMI_10X_VDEV_RESUME_RESPONSE_CMDID,
1374        WMI_10X_VDEV_SET_PARAM_CMDID,
1375        WMI_10X_VDEV_INSTALL_KEY_CMDID,
1376
1377        /* peer specific commands */
1378        WMI_10X_PEER_CREATE_CMDID,
1379        WMI_10X_PEER_DELETE_CMDID,
1380        WMI_10X_PEER_FLUSH_TIDS_CMDID,
1381        WMI_10X_PEER_SET_PARAM_CMDID,
1382        WMI_10X_PEER_ASSOC_CMDID,
1383        WMI_10X_PEER_ADD_WDS_ENTRY_CMDID,
1384        WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID,
1385        WMI_10X_PEER_MCAST_GROUP_CMDID,
1386
1387        /* beacon/management specific commands */
1388
1389        WMI_10X_BCN_TX_CMDID,
1390        WMI_10X_BCN_PRB_TMPL_CMDID,
1391        WMI_10X_BCN_FILTER_RX_CMDID,
1392        WMI_10X_PRB_REQ_FILTER_RX_CMDID,
1393        WMI_10X_MGMT_TX_CMDID,
1394
1395        /* commands to directly control ba negotiation directly from host. */
1396        WMI_10X_ADDBA_CLEAR_RESP_CMDID,
1397        WMI_10X_ADDBA_SEND_CMDID,
1398        WMI_10X_ADDBA_STATUS_CMDID,
1399        WMI_10X_DELBA_SEND_CMDID,
1400        WMI_10X_ADDBA_SET_RESP_CMDID,
1401        WMI_10X_SEND_SINGLEAMSDU_CMDID,
1402
1403        /* Station power save specific config */
1404        WMI_10X_STA_POWERSAVE_MODE_CMDID,
1405        WMI_10X_STA_POWERSAVE_PARAM_CMDID,
1406        WMI_10X_STA_MIMO_PS_MODE_CMDID,
1407
1408        /* set debug log config */
1409        WMI_10X_DBGLOG_CFG_CMDID,
1410
1411        /* DFS-specific commands */
1412        WMI_10X_PDEV_DFS_ENABLE_CMDID,
1413        WMI_10X_PDEV_DFS_DISABLE_CMDID,
1414
1415        /* QVIT specific command id */
1416        WMI_10X_PDEV_QVIT_CMDID,
1417
1418        /* Offload Scan and Roaming related  commands */
1419        WMI_10X_ROAM_SCAN_MODE,
1420        WMI_10X_ROAM_SCAN_RSSI_THRESHOLD,
1421        WMI_10X_ROAM_SCAN_PERIOD,
1422        WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1423        WMI_10X_ROAM_AP_PROFILE,
1424        WMI_10X_OFL_SCAN_ADD_AP_PROFILE,
1425        WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE,
1426        WMI_10X_OFL_SCAN_PERIOD,
1427
1428        /* P2P specific commands */
1429        WMI_10X_P2P_DEV_SET_DEVICE_INFO,
1430        WMI_10X_P2P_DEV_SET_DISCOVERABILITY,
1431        WMI_10X_P2P_GO_SET_BEACON_IE,
1432        WMI_10X_P2P_GO_SET_PROBE_RESP_IE,
1433
1434        /* AP power save specific config */
1435        WMI_10X_AP_PS_PEER_PARAM_CMDID,
1436        WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID,
1437
1438        /* Rate-control specific commands */
1439        WMI_10X_PEER_RATE_RETRY_SCHED_CMDID,
1440
1441        /* WLAN Profiling commands. */
1442        WMI_10X_WLAN_PROFILE_TRIGGER_CMDID,
1443        WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1444        WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1445        WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1446        WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1447
1448        /* Suspend resume command Ids */
1449        WMI_10X_PDEV_SUSPEND_CMDID,
1450        WMI_10X_PDEV_RESUME_CMDID,
1451
1452        /* Beacon filter commands */
1453        WMI_10X_ADD_BCN_FILTER_CMDID,
1454        WMI_10X_RMV_BCN_FILTER_CMDID,
1455
1456        /* WOW Specific WMI commands*/
1457        WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID,
1458        WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID,
1459        WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1460        WMI_10X_WOW_ENABLE_CMDID,
1461        WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1462
1463        /* RTT measurement related cmd */
1464        WMI_10X_RTT_MEASREQ_CMDID,
1465        WMI_10X_RTT_TSF_CMDID,
1466
1467        /* transmit beacon by value */
1468        WMI_10X_PDEV_SEND_BCN_CMDID,
1469
1470        /* F/W stats */
1471        WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1472        WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1473        WMI_10X_REQUEST_STATS_CMDID,
1474
1475        /* GPIO Configuration */
1476        WMI_10X_GPIO_CONFIG_CMDID,
1477        WMI_10X_GPIO_OUTPUT_CMDID,
1478
1479        WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1,
1480};
1481
1482enum wmi_10x_event_id {
1483        WMI_10X_SERVICE_READY_EVENTID = 0x8000,
1484        WMI_10X_READY_EVENTID,
1485        WMI_10X_START_EVENTID = 0x9000,
1486        WMI_10X_END_EVENTID = 0x9FFF,
1487
1488        /* Scan specific events */
1489        WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID,
1490        WMI_10X_ECHO_EVENTID,
1491        WMI_10X_DEBUG_MESG_EVENTID,
1492        WMI_10X_UPDATE_STATS_EVENTID,
1493
1494        /* Instantaneous RSSI event */
1495        WMI_10X_INST_RSSI_STATS_EVENTID,
1496
1497        /* VDEV specific events */
1498        WMI_10X_VDEV_START_RESP_EVENTID,
1499        WMI_10X_VDEV_STANDBY_REQ_EVENTID,
1500        WMI_10X_VDEV_RESUME_REQ_EVENTID,
1501        WMI_10X_VDEV_STOPPED_EVENTID,
1502
1503        /* peer  specific events */
1504        WMI_10X_PEER_STA_KICKOUT_EVENTID,
1505
1506        /* beacon/mgmt specific events */
1507        WMI_10X_HOST_SWBA_EVENTID,
1508        WMI_10X_TBTTOFFSET_UPDATE_EVENTID,
1509        WMI_10X_MGMT_RX_EVENTID,
1510
1511        /* Channel stats event */
1512        WMI_10X_CHAN_INFO_EVENTID,
1513
1514        /* PHY Error specific WMI event */
1515        WMI_10X_PHYERR_EVENTID,
1516
1517        /* Roam event to trigger roaming on host */
1518        WMI_10X_ROAM_EVENTID,
1519
1520        /* matching AP found from list of profiles */
1521        WMI_10X_PROFILE_MATCH,
1522
1523        /* debug print message used for tracing FW code while debugging */
1524        WMI_10X_DEBUG_PRINT_EVENTID,
1525        /* VI spoecific event */
1526        WMI_10X_PDEV_QVIT_EVENTID,
1527        /* FW code profile data in response to profile request */
1528        WMI_10X_WLAN_PROFILE_DATA_EVENTID,
1529
1530        /*RTT related event ID*/
1531        WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID,
1532        WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID,
1533        WMI_10X_RTT_ERROR_REPORT_EVENTID,
1534
1535        WMI_10X_WOW_WAKEUP_HOST_EVENTID,
1536        WMI_10X_DCS_INTERFERENCE_EVENTID,
1537
1538        /* TPC config for the current operating channel */
1539        WMI_10X_PDEV_TPC_CONFIG_EVENTID,
1540
1541        WMI_10X_GPIO_INPUT_EVENTID,
1542        WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1,
1543};
1544
1545enum wmi_10_2_cmd_id {
1546        WMI_10_2_START_CMDID = 0x9000,
1547        WMI_10_2_END_CMDID = 0x9FFF,
1548        WMI_10_2_INIT_CMDID,
1549        WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID,
1550        WMI_10_2_STOP_SCAN_CMDID,
1551        WMI_10_2_SCAN_CHAN_LIST_CMDID,
1552        WMI_10_2_ECHO_CMDID,
1553        WMI_10_2_PDEV_SET_REGDOMAIN_CMDID,
1554        WMI_10_2_PDEV_SET_CHANNEL_CMDID,
1555        WMI_10_2_PDEV_SET_PARAM_CMDID,
1556        WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID,
1557        WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID,
1558        WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID,
1559        WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID,
1560        WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID,
1561        WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID,
1562        WMI_10_2_PDEV_SET_QUIET_MODE_CMDID,
1563        WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1564        WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID,
1565        WMI_10_2_VDEV_CREATE_CMDID,
1566        WMI_10_2_VDEV_DELETE_CMDID,
1567        WMI_10_2_VDEV_START_REQUEST_CMDID,
1568        WMI_10_2_VDEV_RESTART_REQUEST_CMDID,
1569        WMI_10_2_VDEV_UP_CMDID,
1570        WMI_10_2_VDEV_STOP_CMDID,
1571        WMI_10_2_VDEV_DOWN_CMDID,
1572        WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID,
1573        WMI_10_2_VDEV_RESUME_RESPONSE_CMDID,
1574        WMI_10_2_VDEV_SET_PARAM_CMDID,
1575        WMI_10_2_VDEV_INSTALL_KEY_CMDID,
1576        WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID,
1577        WMI_10_2_PEER_CREATE_CMDID,
1578        WMI_10_2_PEER_DELETE_CMDID,
1579        WMI_10_2_PEER_FLUSH_TIDS_CMDID,
1580        WMI_10_2_PEER_SET_PARAM_CMDID,
1581        WMI_10_2_PEER_ASSOC_CMDID,
1582        WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID,
1583        WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID,
1584        WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID,
1585        WMI_10_2_PEER_MCAST_GROUP_CMDID,
1586        WMI_10_2_BCN_TX_CMDID,
1587        WMI_10_2_BCN_PRB_TMPL_CMDID,
1588        WMI_10_2_BCN_FILTER_RX_CMDID,
1589        WMI_10_2_PRB_REQ_FILTER_RX_CMDID,
1590        WMI_10_2_MGMT_TX_CMDID,
1591        WMI_10_2_ADDBA_CLEAR_RESP_CMDID,
1592        WMI_10_2_ADDBA_SEND_CMDID,
1593        WMI_10_2_ADDBA_STATUS_CMDID,
1594        WMI_10_2_DELBA_SEND_CMDID,
1595        WMI_10_2_ADDBA_SET_RESP_CMDID,
1596        WMI_10_2_SEND_SINGLEAMSDU_CMDID,
1597        WMI_10_2_STA_POWERSAVE_MODE_CMDID,
1598        WMI_10_2_STA_POWERSAVE_PARAM_CMDID,
1599        WMI_10_2_STA_MIMO_PS_MODE_CMDID,
1600        WMI_10_2_DBGLOG_CFG_CMDID,
1601        WMI_10_2_PDEV_DFS_ENABLE_CMDID,
1602        WMI_10_2_PDEV_DFS_DISABLE_CMDID,
1603        WMI_10_2_PDEV_QVIT_CMDID,
1604        WMI_10_2_ROAM_SCAN_MODE,
1605        WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD,
1606        WMI_10_2_ROAM_SCAN_PERIOD,
1607        WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1608        WMI_10_2_ROAM_AP_PROFILE,
1609        WMI_10_2_OFL_SCAN_ADD_AP_PROFILE,
1610        WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE,
1611        WMI_10_2_OFL_SCAN_PERIOD,
1612        WMI_10_2_P2P_DEV_SET_DEVICE_INFO,
1613        WMI_10_2_P2P_DEV_SET_DISCOVERABILITY,
1614        WMI_10_2_P2P_GO_SET_BEACON_IE,
1615        WMI_10_2_P2P_GO_SET_PROBE_RESP_IE,
1616        WMI_10_2_AP_PS_PEER_PARAM_CMDID,
1617        WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID,
1618        WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID,
1619        WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID,
1620        WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1621        WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1622        WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1623        WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1624        WMI_10_2_PDEV_SUSPEND_CMDID,
1625        WMI_10_2_PDEV_RESUME_CMDID,
1626        WMI_10_2_ADD_BCN_FILTER_CMDID,
1627        WMI_10_2_RMV_BCN_FILTER_CMDID,
1628        WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID,
1629        WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID,
1630        WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1631        WMI_10_2_WOW_ENABLE_CMDID,
1632        WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1633        WMI_10_2_RTT_MEASREQ_CMDID,
1634        WMI_10_2_RTT_TSF_CMDID,
1635        WMI_10_2_RTT_KEEPALIVE_CMDID,
1636        WMI_10_2_PDEV_SEND_BCN_CMDID,
1637        WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1638        WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1639        WMI_10_2_REQUEST_STATS_CMDID,
1640        WMI_10_2_GPIO_CONFIG_CMDID,
1641        WMI_10_2_GPIO_OUTPUT_CMDID,
1642        WMI_10_2_VDEV_RATEMASK_CMDID,
1643        WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID,
1644        WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1645        WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1646        WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1647        WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1648        WMI_10_2_FORCE_FW_HANG_CMDID,
1649        WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1650        WMI_10_2_PDEV_SET_CTL_TABLE_CMDID,
1651        WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1652        WMI_10_2_PDEV_RATEPWR_TABLE_CMDID,
1653        WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1654        WMI_10_2_PDEV_GET_INFO,
1655        WMI_10_2_VDEV_GET_INFO,
1656        WMI_10_2_VDEV_ATF_REQUEST_CMDID,
1657        WMI_10_2_PEER_ATF_REQUEST_CMDID,
1658        WMI_10_2_PDEV_GET_TEMPERATURE_CMDID,
1659        WMI_10_2_MU_CAL_START_CMDID,
1660        WMI_10_2_SET_LTEU_CONFIG_CMDID,
1661        WMI_10_2_SET_CCA_PARAMS,
1662        WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
1663        WMI_10_2_FWTEST_CMDID,
1664        WMI_10_2_PDEV_SET_BB_TIMING_CONFIG_CMDID,
1665        WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1,
1666};
1667
1668enum wmi_10_2_event_id {
1669        WMI_10_2_SERVICE_READY_EVENTID = 0x8000,
1670        WMI_10_2_READY_EVENTID,
1671        WMI_10_2_DEBUG_MESG_EVENTID,
1672        WMI_10_2_START_EVENTID = 0x9000,
1673        WMI_10_2_END_EVENTID = 0x9FFF,
1674        WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID,
1675        WMI_10_2_ECHO_EVENTID,
1676        WMI_10_2_UPDATE_STATS_EVENTID,
1677        WMI_10_2_INST_RSSI_STATS_EVENTID,
1678        WMI_10_2_VDEV_START_RESP_EVENTID,
1679        WMI_10_2_VDEV_STANDBY_REQ_EVENTID,
1680        WMI_10_2_VDEV_RESUME_REQ_EVENTID,
1681        WMI_10_2_VDEV_STOPPED_EVENTID,
1682        WMI_10_2_PEER_STA_KICKOUT_EVENTID,
1683        WMI_10_2_HOST_SWBA_EVENTID,
1684        WMI_10_2_TBTTOFFSET_UPDATE_EVENTID,
1685        WMI_10_2_MGMT_RX_EVENTID,
1686        WMI_10_2_CHAN_INFO_EVENTID,
1687        WMI_10_2_PHYERR_EVENTID,
1688        WMI_10_2_ROAM_EVENTID,
1689        WMI_10_2_PROFILE_MATCH,
1690        WMI_10_2_DEBUG_PRINT_EVENTID,
1691        WMI_10_2_PDEV_QVIT_EVENTID,
1692        WMI_10_2_WLAN_PROFILE_DATA_EVENTID,
1693        WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID,
1694        WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID,
1695        WMI_10_2_RTT_ERROR_REPORT_EVENTID,
1696        WMI_10_2_RTT_KEEPALIVE_EVENTID,
1697        WMI_10_2_WOW_WAKEUP_HOST_EVENTID,
1698        WMI_10_2_DCS_INTERFERENCE_EVENTID,
1699        WMI_10_2_PDEV_TPC_CONFIG_EVENTID,
1700        WMI_10_2_GPIO_INPUT_EVENTID,
1701        WMI_10_2_PEER_RATECODE_LIST_EVENTID,
1702        WMI_10_2_GENERIC_BUFFER_EVENTID,
1703        WMI_10_2_MCAST_BUF_RELEASE_EVENTID,
1704        WMI_10_2_MCAST_LIST_AGEOUT_EVENTID,
1705        WMI_10_2_WDS_PEER_EVENTID,
1706        WMI_10_2_PEER_STA_PS_STATECHG_EVENTID,
1707        WMI_10_2_PDEV_TEMPERATURE_EVENTID,
1708        WMI_10_2_MU_REPORT_EVENTID,
1709        WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID,
1710        WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1,
1711};
1712
1713enum wmi_10_4_cmd_id {
1714        WMI_10_4_START_CMDID = 0x9000,
1715        WMI_10_4_END_CMDID = 0x9FFF,
1716        WMI_10_4_INIT_CMDID,
1717        WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID,
1718        WMI_10_4_STOP_SCAN_CMDID,
1719        WMI_10_4_SCAN_CHAN_LIST_CMDID,
1720        WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID,
1721        WMI_10_4_SCAN_UPDATE_REQUEST_CMDID,
1722        WMI_10_4_ECHO_CMDID,
1723        WMI_10_4_PDEV_SET_REGDOMAIN_CMDID,
1724        WMI_10_4_PDEV_SET_CHANNEL_CMDID,
1725        WMI_10_4_PDEV_SET_PARAM_CMDID,
1726        WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID,
1727        WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID,
1728        WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID,
1729        WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID,
1730        WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID,
1731        WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID,
1732        WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID,
1733        WMI_10_4_PDEV_SET_QUIET_MODE_CMDID,
1734        WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1735        WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID,
1736        WMI_10_4_VDEV_CREATE_CMDID,
1737        WMI_10_4_VDEV_DELETE_CMDID,
1738        WMI_10_4_VDEV_START_REQUEST_CMDID,
1739        WMI_10_4_VDEV_RESTART_REQUEST_CMDID,
1740        WMI_10_4_VDEV_UP_CMDID,
1741        WMI_10_4_VDEV_STOP_CMDID,
1742        WMI_10_4_VDEV_DOWN_CMDID,
1743        WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID,
1744        WMI_10_4_VDEV_RESUME_RESPONSE_CMDID,
1745        WMI_10_4_VDEV_SET_PARAM_CMDID,
1746        WMI_10_4_VDEV_INSTALL_KEY_CMDID,
1747        WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID,
1748        WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID,
1749        WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID,
1750        WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID,
1751        WMI_10_4_PEER_CREATE_CMDID,
1752        WMI_10_4_PEER_DELETE_CMDID,
1753        WMI_10_4_PEER_FLUSH_TIDS_CMDID,
1754        WMI_10_4_PEER_SET_PARAM_CMDID,
1755        WMI_10_4_PEER_ASSOC_CMDID,
1756        WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID,
1757        WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID,
1758        WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID,
1759        WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID,
1760        WMI_10_4_PEER_MCAST_GROUP_CMDID,
1761        WMI_10_4_BCN_TX_CMDID,
1762        WMI_10_4_PDEV_SEND_BCN_CMDID,
1763        WMI_10_4_BCN_PRB_TMPL_CMDID,
1764        WMI_10_4_BCN_FILTER_RX_CMDID,
1765        WMI_10_4_PRB_REQ_FILTER_RX_CMDID,
1766        WMI_10_4_MGMT_TX_CMDID,
1767        WMI_10_4_PRB_TMPL_CMDID,
1768        WMI_10_4_ADDBA_CLEAR_RESP_CMDID,
1769        WMI_10_4_ADDBA_SEND_CMDID,
1770        WMI_10_4_ADDBA_STATUS_CMDID,
1771        WMI_10_4_DELBA_SEND_CMDID,
1772        WMI_10_4_ADDBA_SET_RESP_CMDID,
1773        WMI_10_4_SEND_SINGLEAMSDU_CMDID,
1774        WMI_10_4_STA_POWERSAVE_MODE_CMDID,
1775        WMI_10_4_STA_POWERSAVE_PARAM_CMDID,
1776        WMI_10_4_STA_MIMO_PS_MODE_CMDID,
1777        WMI_10_4_DBGLOG_CFG_CMDID,
1778        WMI_10_4_PDEV_DFS_ENABLE_CMDID,
1779        WMI_10_4_PDEV_DFS_DISABLE_CMDID,
1780        WMI_10_4_PDEV_QVIT_CMDID,
1781        WMI_10_4_ROAM_SCAN_MODE,
1782        WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD,
1783        WMI_10_4_ROAM_SCAN_PERIOD,
1784        WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1785        WMI_10_4_ROAM_AP_PROFILE,
1786        WMI_10_4_OFL_SCAN_ADD_AP_PROFILE,
1787        WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE,
1788        WMI_10_4_OFL_SCAN_PERIOD,
1789        WMI_10_4_P2P_DEV_SET_DEVICE_INFO,
1790        WMI_10_4_P2P_DEV_SET_DISCOVERABILITY,
1791        WMI_10_4_P2P_GO_SET_BEACON_IE,
1792        WMI_10_4_P2P_GO_SET_PROBE_RESP_IE,
1793        WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID,
1794        WMI_10_4_AP_PS_PEER_PARAM_CMDID,
1795        WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID,
1796        WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID,
1797        WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID,
1798        WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1799        WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1800        WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1801        WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1802        WMI_10_4_PDEV_SUSPEND_CMDID,
1803        WMI_10_4_PDEV_RESUME_CMDID,
1804        WMI_10_4_ADD_BCN_FILTER_CMDID,
1805        WMI_10_4_RMV_BCN_FILTER_CMDID,
1806        WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID,
1807        WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID,
1808        WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1809        WMI_10_4_WOW_ENABLE_CMDID,
1810        WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1811        WMI_10_4_RTT_MEASREQ_CMDID,
1812        WMI_10_4_RTT_TSF_CMDID,
1813        WMI_10_4_RTT_KEEPALIVE_CMDID,
1814        WMI_10_4_OEM_REQ_CMDID,
1815        WMI_10_4_NAN_CMDID,
1816        WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1817        WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1818        WMI_10_4_REQUEST_STATS_CMDID,
1819        WMI_10_4_GPIO_CONFIG_CMDID,
1820        WMI_10_4_GPIO_OUTPUT_CMDID,
1821        WMI_10_4_VDEV_RATEMASK_CMDID,
1822        WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID,
1823        WMI_10_4_GTK_OFFLOAD_CMDID,
1824        WMI_10_4_QBOOST_CFG_CMDID,
1825        WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID,
1826        WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID,
1827        WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1828        WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1829        WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1830        WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1831        WMI_10_4_VDEV_SET_KEEPALIVE_CMDID,
1832        WMI_10_4_VDEV_GET_KEEPALIVE_CMDID,
1833        WMI_10_4_FORCE_FW_HANG_CMDID,
1834        WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1835        WMI_10_4_PDEV_SET_CTL_TABLE_CMDID,
1836        WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1837        WMI_10_4_PDEV_RATEPWR_TABLE_CMDID,
1838        WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1839        WMI_10_4_PDEV_FIPS_CMDID,
1840        WMI_10_4_TT_SET_CONF_CMDID,
1841        WMI_10_4_FWTEST_CMDID,
1842        WMI_10_4_VDEV_ATF_REQUEST_CMDID,
1843        WMI_10_4_PEER_ATF_REQUEST_CMDID,
1844        WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID,
1845        WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID,
1846        WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID,
1847        WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID,
1848        WMI_10_4_PDEV_GET_TPC_CMDID,
1849        WMI_10_4_PDEV_GET_AST_INFO_CMDID,
1850        WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID,
1851        WMI_10_4_PDEV_GET_TEMPERATURE_CMDID,
1852        WMI_10_4_PDEV_GET_INFO_CMDID,
1853        WMI_10_4_VDEV_GET_INFO_CMDID,
1854        WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID,
1855        WMI_10_4_MU_CAL_START_CMDID,
1856        WMI_10_4_SET_CCA_PARAMS_CMDID,
1857        WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
1858        WMI_10_4_EXT_RESOURCE_CFG_CMDID,
1859        WMI_10_4_VDEV_SET_IE_CMDID,
1860        WMI_10_4_SET_LTEU_CONFIG_CMDID,
1861        WMI_10_4_ATF_SSID_GROUPING_REQUEST_CMDID,
1862        WMI_10_4_PEER_ATF_EXT_REQUEST_CMDID,
1863        WMI_10_4_SET_PERIODIC_CHANNEL_STATS_CONFIG,
1864        WMI_10_4_PEER_BWF_REQUEST_CMDID,
1865        WMI_10_4_BTCOEX_CFG_CMDID,
1866        WMI_10_4_PEER_TX_MU_TXMIT_COUNT_CMDID,
1867        WMI_10_4_PEER_TX_MU_TXMIT_RSTCNT_CMDID,
1868        WMI_10_4_PEER_GID_USERPOS_LIST_CMDID,
1869        WMI_10_4_PDEV_CHECK_CAL_VERSION_CMDID,
1870        WMI_10_4_COEX_VERSION_CFG_CMID,
1871        WMI_10_4_PDEV_GET_RX_FILTER_CMDID,
1872        WMI_10_4_PDEV_EXTENDED_NSS_CFG_CMDID,
1873        WMI_10_4_VDEV_SET_SCAN_NAC_RSSI_CMDID,
1874        WMI_10_4_PROG_GPIO_BAND_SELECT_CMDID,
1875        WMI_10_4_CONFIG_SMART_LOGGING_CMDID,
1876        WMI_10_4_DEBUG_FATAL_CONDITION_CMDID,
1877        WMI_10_4_GET_TSF_TIMER_CMDID,
1878        WMI_10_4_PDEV_GET_TPC_TABLE_CMDID,
1879        WMI_10_4_VDEV_SIFS_TRIGGER_TIME_CMDID,
1880        WMI_10_4_PDEV_WDS_ENTRY_LIST_CMDID,
1881        WMI_10_4_TDLS_SET_STATE_CMDID,
1882        WMI_10_4_TDLS_PEER_UPDATE_CMDID,
1883        WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID,
1884        WMI_10_4_PDEV_SEND_FD_CMDID,
1885        WMI_10_4_ENABLE_FILS_CMDID,
1886        WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID,
1887        WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID,
1888        WMI_10_4_RADAR_FOUND_CMDID,
1889        WMI_10_4_PEER_CFR_CAPTURE_CMDID,
1890        WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID,
1891        WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1,
1892};
1893
1894enum wmi_10_4_event_id {
1895        WMI_10_4_SERVICE_READY_EVENTID = 0x8000,
1896        WMI_10_4_READY_EVENTID,
1897        WMI_10_4_DEBUG_MESG_EVENTID,
1898        WMI_10_4_START_EVENTID = 0x9000,
1899        WMI_10_4_END_EVENTID = 0x9FFF,
1900        WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID,
1901        WMI_10_4_ECHO_EVENTID,
1902        WMI_10_4_UPDATE_STATS_EVENTID,
1903        WMI_10_4_INST_RSSI_STATS_EVENTID,
1904        WMI_10_4_VDEV_START_RESP_EVENTID,
1905        WMI_10_4_VDEV_STANDBY_REQ_EVENTID,
1906        WMI_10_4_VDEV_RESUME_REQ_EVENTID,
1907        WMI_10_4_VDEV_STOPPED_EVENTID,
1908        WMI_10_4_PEER_STA_KICKOUT_EVENTID,
1909        WMI_10_4_HOST_SWBA_EVENTID,
1910        WMI_10_4_TBTTOFFSET_UPDATE_EVENTID,
1911        WMI_10_4_MGMT_RX_EVENTID,
1912        WMI_10_4_CHAN_INFO_EVENTID,
1913        WMI_10_4_PHYERR_EVENTID,
1914        WMI_10_4_ROAM_EVENTID,
1915        WMI_10_4_PROFILE_MATCH,
1916        WMI_10_4_DEBUG_PRINT_EVENTID,
1917        WMI_10_4_PDEV_QVIT_EVENTID,
1918        WMI_10_4_WLAN_PROFILE_DATA_EVENTID,
1919        WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID,
1920        WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID,
1921        WMI_10_4_RTT_ERROR_REPORT_EVENTID,
1922        WMI_10_4_RTT_KEEPALIVE_EVENTID,
1923        WMI_10_4_OEM_CAPABILITY_EVENTID,
1924        WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID,
1925        WMI_10_4_OEM_ERROR_REPORT_EVENTID,
1926        WMI_10_4_NAN_EVENTID,
1927        WMI_10_4_WOW_WAKEUP_HOST_EVENTID,
1928        WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID,
1929        WMI_10_4_GTK_REKEY_FAIL_EVENTID,
1930        WMI_10_4_DCS_INTERFERENCE_EVENTID,
1931        WMI_10_4_PDEV_TPC_CONFIG_EVENTID,
1932        WMI_10_4_CSA_HANDLING_EVENTID,
1933        WMI_10_4_GPIO_INPUT_EVENTID,
1934        WMI_10_4_PEER_RATECODE_LIST_EVENTID,
1935        WMI_10_4_GENERIC_BUFFER_EVENTID,
1936        WMI_10_4_MCAST_BUF_RELEASE_EVENTID,
1937        WMI_10_4_MCAST_LIST_AGEOUT_EVENTID,
1938        WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID,
1939        WMI_10_4_WDS_PEER_EVENTID,
1940        WMI_10_4_PEER_STA_PS_STATECHG_EVENTID,
1941        WMI_10_4_PDEV_FIPS_EVENTID,
1942        WMI_10_4_TT_STATS_EVENTID,
1943        WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID,
1944        WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID,
1945        WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID,
1946        WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID,
1947        WMI_10_4_PDEV_NFCAL_POWER_EVENTID,
1948        WMI_10_4_PDEV_TPC_EVENTID,
1949        WMI_10_4_PDEV_GET_AST_INFO_EVENTID,
1950        WMI_10_4_PDEV_TEMPERATURE_EVENTID,
1951        WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID,
1952        WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID,
1953        WMI_10_4_MU_REPORT_EVENTID,
1954        WMI_10_4_TX_DATA_TRAFFIC_CTRL_EVENTID,
1955        WMI_10_4_PEER_TX_MU_TXMIT_COUNT_EVENTID,
1956        WMI_10_4_PEER_GID_USERPOS_LIST_EVENTID,
1957        WMI_10_4_PDEV_CHECK_CAL_VERSION_EVENTID,
1958        WMI_10_4_ATF_PEER_STATS_EVENTID,
1959        WMI_10_4_PDEV_GET_RX_FILTER_EVENTID,
1960        WMI_10_4_NAC_RSSI_EVENTID,
1961        WMI_10_4_DEBUG_FATAL_CONDITION_EVENTID,
1962        WMI_10_4_GET_TSF_TIMER_RESP_EVENTID,
1963        WMI_10_4_PDEV_TPC_TABLE_EVENTID,
1964        WMI_10_4_PDEV_WDS_ENTRY_LIST_EVENTID,
1965        WMI_10_4_TDLS_PEER_EVENTID,
1966        WMI_10_4_HOST_SWFDA_EVENTID,
1967        WMI_10_4_ESP_ESTIMATE_EVENTID,
1968        WMI_10_4_DFS_STATUS_CHECK_EVENTID,
1969        WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1,
1970};
1971
1972enum wmi_phy_mode {
1973        MODE_11A        = 0,   /* 11a Mode */
1974        MODE_11G        = 1,   /* 11b/g Mode */
1975        MODE_11B        = 2,   /* 11b Mode */
1976        MODE_11GONLY    = 3,   /* 11g only Mode */
1977        MODE_11NA_HT20   = 4,  /* 11a HT20 mode */
1978        MODE_11NG_HT20   = 5,  /* 11g HT20 mode */
1979        MODE_11NA_HT40   = 6,  /* 11a HT40 mode */
1980        MODE_11NG_HT40   = 7,  /* 11g HT40 mode */
1981        MODE_11AC_VHT20 = 8,
1982        MODE_11AC_VHT40 = 9,
1983        MODE_11AC_VHT80 = 10,
1984        /*    MODE_11AC_VHT160 = 11, */
1985        MODE_11AC_VHT20_2G = 11,
1986        MODE_11AC_VHT40_2G = 12,
1987        MODE_11AC_VHT80_2G = 13,
1988        MODE_11AC_VHT80_80 = 14,
1989        MODE_11AC_VHT160 = 15,
1990        MODE_UNKNOWN    = 16,
1991        MODE_MAX        = 16
1992};
1993
1994static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode)
1995{
1996        switch (mode) {
1997        case MODE_11A:
1998                return "11a";
1999        case MODE_11G:
2000                return "11g";
2001        case MODE_11B:
2002                return "11b";
2003        case MODE_11GONLY:
2004                return "11gonly";
2005        case MODE_11NA_HT20:
2006                return "11na-ht20";
2007        case MODE_11NG_HT20:
2008                return "11ng-ht20";
2009        case MODE_11NA_HT40:
2010                return "11na-ht40";
2011        case MODE_11NG_HT40:
2012                return "11ng-ht40";
2013        case MODE_11AC_VHT20:
2014                return "11ac-vht20";
2015        case MODE_11AC_VHT40:
2016                return "11ac-vht40";
2017        case MODE_11AC_VHT80:
2018                return "11ac-vht80";
2019        case MODE_11AC_VHT160:
2020                return "11ac-vht160";
2021        case MODE_11AC_VHT80_80:
2022                return "11ac-vht80+80";
2023        case MODE_11AC_VHT20_2G:
2024                return "11ac-vht20-2g";
2025        case MODE_11AC_VHT40_2G:
2026                return "11ac-vht40-2g";
2027        case MODE_11AC_VHT80_2G:
2028                return "11ac-vht80-2g";
2029        case MODE_UNKNOWN:
2030                /* skip */
2031                break;
2032
2033                /* no default handler to allow compiler to check that the
2034                 * enum is fully handled
2035                 */
2036        }
2037
2038        return "<unknown>";
2039}
2040
2041#define WMI_CHAN_LIST_TAG       0x1
2042#define WMI_SSID_LIST_TAG       0x2
2043#define WMI_BSSID_LIST_TAG      0x3
2044#define WMI_IE_TAG              0x4
2045
2046struct wmi_channel {
2047        __le32 mhz;
2048        __le32 band_center_freq1;
2049        __le32 band_center_freq2; /* valid for 11ac, 80plus80 */
2050        union {
2051                __le32 flags; /* WMI_CHAN_FLAG_ */
2052                struct {
2053                        u8 mode; /* only 6 LSBs */
2054                } __packed;
2055        } __packed;
2056        union {
2057                __le32 reginfo0;
2058                struct {
2059                        /* note: power unit is 0.5 dBm */
2060                        u8 min_power;
2061                        u8 max_power;
2062                        u8 reg_power;
2063                        u8 reg_classid;
2064                } __packed;
2065        } __packed;
2066        union {
2067                __le32 reginfo1;
2068                struct {
2069                        u8 antenna_max;
2070                        u8 max_tx_power;
2071                } __packed;
2072        } __packed;
2073} __packed;
2074
2075struct wmi_channel_arg {
2076        u32 freq;
2077        u32 band_center_freq1;
2078        u32 band_center_freq2;
2079        bool passive;
2080        bool allow_ibss;
2081        bool allow_ht;
2082        bool allow_vht;
2083        bool ht40plus;
2084        bool chan_radar;
2085        /* note: power unit is 0.5 dBm */
2086        u32 min_power;
2087        u32 max_power;
2088        u32 max_reg_power;
2089        u32 max_antenna_gain;
2090        u32 reg_class_id;
2091        enum wmi_phy_mode mode;
2092};
2093
2094enum wmi_channel_change_cause {
2095        WMI_CHANNEL_CHANGE_CAUSE_NONE = 0,
2096        WMI_CHANNEL_CHANGE_CAUSE_CSA,
2097};
2098
2099#define WMI_CHAN_FLAG_HT40_PLUS      (1 << 6)
2100#define WMI_CHAN_FLAG_PASSIVE        (1 << 7)
2101#define WMI_CHAN_FLAG_ADHOC_ALLOWED  (1 << 8)
2102#define WMI_CHAN_FLAG_AP_DISABLED    (1 << 9)
2103#define WMI_CHAN_FLAG_DFS            (1 << 10)
2104#define WMI_CHAN_FLAG_ALLOW_HT       (1 << 11)
2105#define WMI_CHAN_FLAG_ALLOW_VHT      (1 << 12)
2106
2107/* Indicate reason for channel switch */
2108#define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13)
2109/* DFS required on channel for 2nd segment of VHT160 and VHT80+80*/
2110#define WMI_CHAN_FLAG_DFS_CFREQ2  (1 << 15)
2111#define WMI_MAX_SPATIAL_STREAM        3 /* default max ss */
2112
2113/* HT Capabilities*/
2114#define WMI_HT_CAP_ENABLED                0x0001   /* HT Enabled/ disabled */
2115#define WMI_HT_CAP_HT20_SGI       0x0002   /* Short Guard Interval with HT20 */
2116#define WMI_HT_CAP_DYNAMIC_SMPS           0x0004   /* Dynamic MIMO powersave */
2117#define WMI_HT_CAP_TX_STBC                0x0008   /* B3 TX STBC */
2118#define WMI_HT_CAP_TX_STBC_MASK_SHIFT     3
2119#define WMI_HT_CAP_RX_STBC                0x0030   /* B4-B5 RX STBC */
2120#define WMI_HT_CAP_RX_STBC_MASK_SHIFT     4
2121#define WMI_HT_CAP_LDPC                   0x0040   /* LDPC supported */
2122#define WMI_HT_CAP_L_SIG_TXOP_PROT        0x0080   /* L-SIG TXOP Protection */
2123#define WMI_HT_CAP_MPDU_DENSITY           0x0700   /* MPDU Density */
2124#define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8
2125#define WMI_HT_CAP_HT40_SGI               0x0800
2126#define WMI_HT_CAP_RX_LDPC                0x1000   /* LDPC RX support */
2127#define WMI_HT_CAP_TX_LDPC                0x2000   /* LDPC TX support */
2128
2129#define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED       | \
2130                                WMI_HT_CAP_HT20_SGI      | \
2131                                WMI_HT_CAP_HT40_SGI      | \
2132                                WMI_HT_CAP_TX_STBC       | \
2133                                WMI_HT_CAP_RX_STBC       | \
2134                                WMI_HT_CAP_LDPC)
2135
2136/*
2137 * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information
2138 * field. The fields not defined here are not supported, or reserved.
2139 * Do not change these masks and if you have to add new one follow the
2140 * bitmask as specified by 802.11ac draft.
2141 */
2142
2143#define WMI_VHT_CAP_MAX_MPDU_LEN_MASK            0x00000003
2144#define WMI_VHT_CAP_RX_LDPC                      0x00000010
2145#define WMI_VHT_CAP_SGI_80MHZ                    0x00000020
2146#define WMI_VHT_CAP_SGI_160MHZ                   0x00000040
2147#define WMI_VHT_CAP_TX_STBC                      0x00000080
2148#define WMI_VHT_CAP_RX_STBC_MASK                 0x00000300
2149#define WMI_VHT_CAP_RX_STBC_MASK_SHIFT           8
2150#define WMI_VHT_CAP_SU_BFER                      0x00000800
2151#define WMI_VHT_CAP_SU_BFEE                      0x00001000
2152#define WMI_VHT_CAP_MAX_CS_ANT_MASK              0x0000E000
2153#define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT        13
2154#define WMI_VHT_CAP_MAX_SND_DIM_MASK             0x00070000
2155#define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT       16
2156#define WMI_VHT_CAP_MU_BFER                      0x00080000
2157#define WMI_VHT_CAP_MU_BFEE                      0x00100000
2158#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP            0x03800000
2159#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT      23
2160#define WMI_VHT_CAP_RX_FIXED_ANT                 0x10000000
2161#define WMI_VHT_CAP_TX_FIXED_ANT                 0x20000000
2162
2163/* The following also refer for max HT AMSDU */
2164#define WMI_VHT_CAP_MAX_MPDU_LEN_3839            0x00000000
2165#define WMI_VHT_CAP_MAX_MPDU_LEN_7935            0x00000001
2166#define WMI_VHT_CAP_MAX_MPDU_LEN_11454           0x00000002
2167
2168#define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454  | \
2169                                 WMI_VHT_CAP_RX_LDPC             | \
2170                                 WMI_VHT_CAP_SGI_80MHZ           | \
2171                                 WMI_VHT_CAP_TX_STBC             | \
2172                                 WMI_VHT_CAP_RX_STBC_MASK        | \
2173                                 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP   | \
2174                                 WMI_VHT_CAP_RX_FIXED_ANT        | \
2175                                 WMI_VHT_CAP_TX_FIXED_ANT)
2176
2177/*
2178 * Interested readers refer to Rx/Tx MCS Map definition as defined in
2179 * 802.11ac
2180 */
2181#define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss)      ((3 & (r)) << (((ss) - 1) << 1))
2182#define WMI_VHT_MAX_SUPP_RATE_MASK           0x1fff0000
2183#define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT     16
2184
2185enum {
2186        REGDMN_MODE_11A              = 0x00001, /* 11a channels */
2187        REGDMN_MODE_TURBO            = 0x00002, /* 11a turbo-only channels */
2188        REGDMN_MODE_11B              = 0x00004, /* 11b channels */
2189        REGDMN_MODE_PUREG            = 0x00008, /* 11g channels (OFDM only) */
2190        REGDMN_MODE_11G              = 0x00008, /* XXX historical */
2191        REGDMN_MODE_108G             = 0x00020, /* 11a+Turbo channels */
2192        REGDMN_MODE_108A             = 0x00040, /* 11g+Turbo channels */
2193        REGDMN_MODE_XR               = 0x00100, /* XR channels */
2194        REGDMN_MODE_11A_HALF_RATE    = 0x00200, /* 11A half rate channels */
2195        REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */
2196        REGDMN_MODE_11NG_HT20        = 0x00800, /* 11N-G HT20 channels */
2197        REGDMN_MODE_11NA_HT20        = 0x01000, /* 11N-A HT20 channels */
2198        REGDMN_MODE_11NG_HT40PLUS    = 0x02000, /* 11N-G HT40 + channels */
2199        REGDMN_MODE_11NG_HT40MINUS   = 0x04000, /* 11N-G HT40 - channels */
2200        REGDMN_MODE_11NA_HT40PLUS    = 0x08000, /* 11N-A HT40 + channels */
2201        REGDMN_MODE_11NA_HT40MINUS   = 0x10000, /* 11N-A HT40 - channels */
2202        REGDMN_MODE_11AC_VHT20       = 0x20000, /* 5Ghz, VHT20 */
2203        REGDMN_MODE_11AC_VHT40PLUS   = 0x40000, /* 5Ghz, VHT40 + channels */
2204        REGDMN_MODE_11AC_VHT40MINUS  = 0x80000, /* 5Ghz  VHT40 - channels */
2205        REGDMN_MODE_11AC_VHT80       = 0x100000, /* 5Ghz, VHT80 channels */
2206        REGDMN_MODE_11AC_VHT160      = 0x200000,     /* 5Ghz, VHT160 channels */
2207        REGDMN_MODE_11AC_VHT80_80    = 0x400000,     /* 5Ghz, VHT80+80 channels */
2208        REGDMN_MODE_ALL              = 0xffffffff
2209};
2210
2211#define REGDMN_CAP1_CHAN_HALF_RATE        0x00000001
2212#define REGDMN_CAP1_CHAN_QUARTER_RATE     0x00000002
2213#define REGDMN_CAP1_CHAN_HAL49GHZ         0x00000004
2214
2215/* regulatory capabilities */
2216#define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND   0x0040
2217#define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN    0x0080
2218#define REGDMN_EEPROM_EEREGCAP_EN_KK_U2         0x0100
2219#define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND    0x0200
2220#define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD     0x0400
2221#define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A    0x0800
2222
2223struct hal_reg_capabilities {
2224        /* regdomain value specified in EEPROM */
2225        __le32 eeprom_rd;
2226        /*regdomain */
2227        __le32 eeprom_rd_ext;
2228        /* CAP1 capabilities bit map. */
2229        __le32 regcap1;
2230        /* REGDMN EEPROM CAP. */
2231        __le32 regcap2;
2232        /* REGDMN MODE */
2233        __le32 wireless_modes;
2234        __le32 low_2ghz_chan;
2235        __le32 high_2ghz_chan;
2236        __le32 low_5ghz_chan;
2237        __le32 high_5ghz_chan;
2238} __packed;
2239
2240enum wlan_mode_capability {
2241        WHAL_WLAN_11A_CAPABILITY   = 0x1,
2242        WHAL_WLAN_11G_CAPABILITY   = 0x2,
2243        WHAL_WLAN_11AG_CAPABILITY  = 0x3,
2244};
2245
2246/* structure used by FW for requesting host memory */
2247struct wlan_host_mem_req {
2248        /* ID of the request */
2249        __le32 req_id;
2250        /* size of the  of each unit */
2251        __le32 unit_size;
2252        /* flags to  indicate that
2253         * the number units is dependent
2254         * on number of resources(num vdevs num peers .. etc)
2255         */
2256        __le32 num_unit_info;
2257        /*
2258         * actual number of units to allocate . if flags in the num_unit_info
2259         * indicate that number of units is tied to number of a particular
2260         * resource to allocate then  num_units filed is set to 0 and host
2261         * will derive the number units from number of the resources it is
2262         * requesting.
2263         */
2264        __le32 num_units;
2265} __packed;
2266
2267/*
2268 * The following struct holds optional payload for
2269 * wmi_service_ready_event,e.g., 11ac pass some of the
2270 * device capability to the host.
2271 */
2272struct wmi_service_ready_event {
2273        __le32 sw_version;
2274        __le32 sw_version_1;
2275        __le32 abi_version;
2276        /* WMI_PHY_CAPABILITY */
2277        __le32 phy_capability;
2278        /* Maximum number of frag table entries that SW will populate less 1 */
2279        __le32 max_frag_entry;
2280        __le32 wmi_service_bitmap[16];
2281        __le32 num_rf_chains;
2282        /*
2283         * The following field is only valid for service type
2284         * WMI_SERVICE_11AC
2285         */
2286        __le32 ht_cap_info; /* WMI HT Capability */
2287        __le32 vht_cap_info; /* VHT capability info field of 802.11ac */
2288        __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
2289        __le32 hw_min_tx_power;
2290        __le32 hw_max_tx_power;
2291        struct hal_reg_capabilities hal_reg_capabilities;
2292        __le32 sys_cap_info;
2293        __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
2294        /*
2295         * Max beacon and Probe Response IE offload size
2296         * (includes optional P2P IEs)
2297         */
2298        __le32 max_bcn_ie_size;
2299        /*
2300         * request to host to allocate a chuck of memory and pss it down to FW
2301         * via WM_INIT. FW uses this as FW extesnsion memory for saving its
2302         * data structures. Only valid for low latency interfaces like PCIE
2303         * where FW can access this memory directly (or) by DMA.
2304         */
2305        __le32 num_mem_reqs;
2306        struct wlan_host_mem_req mem_reqs[];
2307} __packed;
2308
2309/* This is the definition from 10.X firmware branch */
2310struct wmi_10x_service_ready_event {
2311        __le32 sw_version;
2312        __le32 abi_version;
2313
2314        /* WMI_PHY_CAPABILITY */
2315        __le32 phy_capability;
2316
2317        /* Maximum number of frag table entries that SW will populate less 1 */
2318        __le32 max_frag_entry;
2319        __le32 wmi_service_bitmap[16];
2320        __le32 num_rf_chains;
2321
2322        /*
2323         * The following field is only valid for service type
2324         * WMI_SERVICE_11AC
2325         */
2326        __le32 ht_cap_info; /* WMI HT Capability */
2327        __le32 vht_cap_info; /* VHT capability info field of 802.11ac */
2328        __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
2329        __le32 hw_min_tx_power;
2330        __le32 hw_max_tx_power;
2331
2332        struct hal_reg_capabilities hal_reg_capabilities;
2333
2334        __le32 sys_cap_info;
2335        __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
2336
2337        /*
2338         * request to host to allocate a chuck of memory and pss it down to FW
2339         * via WM_INIT. FW uses this as FW extesnsion memory for saving its
2340         * data structures. Only valid for low latency interfaces like PCIE
2341         * where FW can access this memory directly (or) by DMA.
2342         */
2343        __le32 num_mem_reqs;
2344
2345        struct wlan_host_mem_req mem_reqs[];
2346} __packed;
2347
2348#define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ)
2349#define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ)
2350
2351struct wmi_ready_event {
2352        __le32 sw_version;
2353        __le32 abi_version;
2354        struct wmi_mac_addr mac_addr;
2355        __le32 status;
2356} __packed;
2357
2358struct wmi_resource_config {
2359        /* number of virtual devices (VAPs) to support */
2360        __le32 num_vdevs;
2361
2362        /* number of peer nodes to support */
2363        __le32 num_peers;
2364
2365        /*
2366         * In offload mode target supports features like WOW, chatter and
2367         * other protocol offloads. In order to support them some
2368         * functionalities like reorder buffering, PN checking need to be
2369         * done in target. This determines maximum number of peers supported
2370         * by target in offload mode
2371         */
2372        __le32 num_offload_peers;
2373
2374        /* For target-based RX reordering */
2375        __le32 num_offload_reorder_bufs;
2376
2377        /* number of keys per peer */
2378        __le32 num_peer_keys;
2379
2380        /* total number of TX/RX data TIDs */
2381        __le32 num_tids;
2382
2383        /*
2384         * max skid for resolving hash collisions
2385         *
2386         *   The address search table is sparse, so that if two MAC addresses
2387         *   result in the same hash value, the second of these conflicting
2388         *   entries can slide to the next index in the address search table,
2389         *   and use it, if it is unoccupied.  This ast_skid_limit parameter
2390         *   specifies the upper bound on how many subsequent indices to search
2391         *   over to find an unoccupied space.
2392         */
2393        __le32 ast_skid_limit;
2394
2395        /*
2396         * the nominal chain mask for transmit
2397         *
2398         *   The chain mask may be modified dynamically, e.g. to operate AP
2399         *   tx with a reduced number of chains if no clients are associated.
2400         *   This configuration parameter specifies the nominal chain-mask that
2401         *   should be used when not operating with a reduced set of tx chains.
2402         */
2403        __le32 tx_chain_mask;
2404
2405        /*
2406         * the nominal chain mask for receive
2407         *
2408         *   The chain mask may be modified dynamically, e.g. for a client
2409         *   to use a reduced number of chains for receive if the traffic to
2410         *   the client is low enough that it doesn't require downlink MIMO
2411         *   or antenna diversity.
2412         *   This configuration parameter specifies the nominal chain-mask that
2413         *   should be used when not operating with a reduced set of rx chains.
2414         */
2415        __le32 rx_chain_mask;
2416
2417        /*
2418         * what rx reorder timeout (ms) to use for the AC
2419         *
2420         *   Each WMM access class (voice, video, best-effort, background) will
2421         *   have its own timeout value to dictate how long to wait for missing
2422         *   rx MPDUs to arrive before flushing subsequent MPDUs that have
2423         *   already been received.
2424         *   This parameter specifies the timeout in milliseconds for each
2425         *   class.
2426         */
2427        __le32 rx_timeout_pri_vi;
2428        __le32 rx_timeout_pri_vo;
2429        __le32 rx_timeout_pri_be;
2430        __le32 rx_timeout_pri_bk;
2431
2432        /*
2433         * what mode the rx should decap packets to
2434         *
2435         *   MAC can decap to RAW (no decap), native wifi or Ethernet types
2436         *   THis setting also determines the default TX behavior, however TX
2437         *   behavior can be modified on a per VAP basis during VAP init
2438         */
2439        __le32 rx_decap_mode;
2440
2441        /* what is the maximum number of scan requests that can be queued */
2442        __le32 scan_max_pending_reqs;
2443
2444        /* maximum VDEV that could use BMISS offload */
2445        __le32 bmiss_offload_max_vdev;
2446
2447        /* maximum VDEV that could use offload roaming */
2448        __le32 roam_offload_max_vdev;
2449
2450        /* maximum AP profiles that would push to offload roaming */
2451        __le32 roam_offload_max_ap_profiles;
2452
2453        /*
2454         * how many groups to use for mcast->ucast conversion
2455         *
2456         *   The target's WAL maintains a table to hold information regarding
2457         *   which peers belong to a given multicast group, so that if
2458         *   multicast->unicast conversion is enabled, the target can convert
2459         *   multicast tx frames to a series of unicast tx frames, to each
2460         *   peer within the multicast group.
2461             This num_mcast_groups configuration parameter tells the target how
2462         *   many multicast groups to provide storage for within its multicast
2463         *   group membership table.
2464         */
2465        __le32 num_mcast_groups;
2466
2467        /*
2468         * size to alloc for the mcast membership table
2469         *
2470         *   This num_mcast_table_elems configuration parameter tells the
2471         *   target how many peer elements it needs to provide storage for in
2472         *   its multicast group membership table.
2473         *   These multicast group membership table elements are shared by the
2474         *   multicast groups stored within the table.
2475         */
2476        __le32 num_mcast_table_elems;
2477
2478        /*
2479         * whether/how to do multicast->unicast conversion
2480         *
2481         *   This configuration parameter specifies whether the target should
2482         *   perform multicast --> unicast conversion on transmit, and if so,
2483         *   what to do if it finds no entries in its multicast group
2484         *   membership table for the multicast IP address in the tx frame.
2485         *   Configuration value:
2486         *   0 -> Do not perform multicast to unicast conversion.
2487         *   1 -> Convert multicast frames to unicast, if the IP multicast
2488         *        address from the tx frame is found in the multicast group
2489         *        membership table.  If the IP multicast address is not found,
2490         *        drop the frame.
2491         *   2 -> Convert multicast frames to unicast, if the IP multicast
2492         *        address from the tx frame is found in the multicast group
2493         *        membership table.  If the IP multicast address is not found,
2494         *        transmit the frame as multicast.
2495         */
2496        __le32 mcast2ucast_mode;
2497
2498        /*
2499         * how much memory to allocate for a tx PPDU dbg log
2500         *
2501         *   This parameter controls how much memory the target will allocate
2502         *   to store a log of tx PPDU meta-information (how large the PPDU
2503         *   was, when it was sent, whether it was successful, etc.)
2504         */
2505        __le32 tx_dbg_log_size;
2506
2507        /* how many AST entries to be allocated for WDS */
2508        __le32 num_wds_entries;
2509
2510        /*
2511         * MAC DMA burst size, e.g., For target PCI limit can be
2512         * 0 -default, 1 256B
2513         */
2514        __le32 dma_burst_size;
2515
2516        /*
2517         * Fixed delimiters to be inserted after every MPDU to
2518         * account for interface latency to avoid underrun.
2519         */
2520        __le32 mac_aggr_delim;
2521
2522        /*
2523         *   determine whether target is responsible for detecting duplicate
2524         *   non-aggregate MPDU and timing out stale fragments.
2525         *
2526         *   A-MPDU reordering is always performed on the target.
2527         *
2528         *   0: target responsible for frag timeout and dup checking
2529         *   1: host responsible for frag timeout and dup checking
2530         */
2531        __le32 rx_skip_defrag_timeout_dup_detection_check;
2532
2533        /*
2534         * Configuration for VoW :
2535         * No of Video Nodes to be supported
2536         * and Max no of descriptors for each Video link (node).
2537         */
2538        __le32 vow_config;
2539
2540        /* maximum VDEV that could use GTK offload */
2541        __le32 gtk_offload_max_vdev;
2542
2543        /* Number of msdu descriptors target should use */
2544        __le32 num_msdu_desc;
2545
2546        /*
2547         * Max. number of Tx fragments per MSDU
2548         *  This parameter controls the max number of Tx fragments per MSDU.
2549         *  This is sent by the target as part of the WMI_SERVICE_READY event
2550         *  and is overridden by the OS shim as required.
2551         */
2552        __le32 max_frag_entries;
2553} __packed;
2554
2555struct wmi_resource_config_10x {
2556        /* number of virtual devices (VAPs) to support */
2557        __le32 num_vdevs;
2558
2559        /* number of peer nodes to support */
2560        __le32 num_peers;
2561
2562        /* number of keys per peer */
2563        __le32 num_peer_keys;
2564
2565        /* total number of TX/RX data TIDs */
2566        __le32 num_tids;
2567
2568        /*
2569         * max skid for resolving hash collisions
2570         *
2571         *   The address search table is sparse, so that if two MAC addresses
2572         *   result in the same hash value, the second of these conflicting
2573         *   entries can slide to the next index in the address search table,
2574         *   and use it, if it is unoccupied.  This ast_skid_limit parameter
2575         *   specifies the upper bound on how many subsequent indices to search
2576         *   over to find an unoccupied space.
2577         */
2578        __le32 ast_skid_limit;
2579
2580        /*
2581         * the nominal chain mask for transmit
2582         *
2583         *   The chain mask may be modified dynamically, e.g. to operate AP
2584         *   tx with a reduced number of chains if no clients are associated.
2585         *   This configuration parameter specifies the nominal chain-mask that
2586         *   should be used when not operating with a reduced set of tx chains.
2587         */
2588        __le32 tx_chain_mask;
2589
2590        /*
2591         * the nominal chain mask for receive
2592         *
2593         *   The chain mask may be modified dynamically, e.g. for a client
2594         *   to use a reduced number of chains for receive if the traffic to
2595         *   the client is low enough that it doesn't require downlink MIMO
2596         *   or antenna diversity.
2597         *   This configuration parameter specifies the nominal chain-mask that
2598         *   should be used when not operating with a reduced set of rx chains.
2599         */
2600        __le32 rx_chain_mask;
2601
2602        /*
2603         * what rx reorder timeout (ms) to use for the AC
2604         *
2605         *   Each WMM access class (voice, video, best-effort, background) will
2606         *   have its own timeout value to dictate how long to wait for missing
2607         *   rx MPDUs to arrive before flushing subsequent MPDUs that have
2608         *   already been received.
2609         *   This parameter specifies the timeout in milliseconds for each
2610         *   class.
2611         */
2612        __le32 rx_timeout_pri_vi;
2613        __le32 rx_timeout_pri_vo;
2614        __le32 rx_timeout_pri_be;
2615        __le32 rx_timeout_pri_bk;
2616
2617        /*
2618         * what mode the rx should decap packets to
2619         *
2620         *   MAC can decap to RAW (no decap), native wifi or Ethernet types
2621         *   THis setting also determines the default TX behavior, however TX
2622         *   behavior can be modified on a per VAP basis during VAP init
2623         */
2624        __le32 rx_decap_mode;
2625
2626        /* what is the maximum number of scan requests that can be queued */
2627        __le32 scan_max_pending_reqs;
2628
2629        /* maximum VDEV that could use BMISS offload */
2630        __le32 bmiss_offload_max_vdev;
2631
2632        /* maximum VDEV that could use offload roaming */
2633        __le32 roam_offload_max_vdev;
2634
2635        /* maximum AP profiles that would push to offload roaming */
2636        __le32 roam_offload_max_ap_profiles;
2637
2638        /*
2639         * how many groups to use for mcast->ucast conversion
2640         *
2641         *   The target's WAL maintains a table to hold information regarding
2642         *   which peers belong to a given multicast group, so that if
2643         *   multicast->unicast conversion is enabled, the target can convert
2644         *   multicast tx frames to a series of unicast tx frames, to each
2645         *   peer within the multicast group.
2646             This num_mcast_groups configuration parameter tells the target how
2647         *   many multicast groups to provide storage for within its multicast
2648         *   group membership table.
2649         */
2650        __le32 num_mcast_groups;
2651
2652        /*
2653         * size to alloc for the mcast membership table
2654         *
2655         *   This num_mcast_table_elems configuration parameter tells the
2656         *   target how many peer elements it needs to provide storage for in
2657         *   its multicast group membership table.
2658         *   These multicast group membership table elements are shared by the
2659         *   multicast groups stored within the table.
2660         */
2661        __le32 num_mcast_table_elems;
2662
2663        /*
2664         * whether/how to do multicast->unicast conversion
2665         *
2666         *   This configuration parameter specifies whether the target should
2667         *   perform multicast --> unicast conversion on transmit, and if so,
2668         *   what to do if it finds no entries in its multicast group
2669         *   membership table for the multicast IP address in the tx frame.
2670         *   Configuration value:
2671         *   0 -> Do not perform multicast to unicast conversion.
2672         *   1 -> Convert multicast frames to unicast, if the IP multicast
2673         *        address from the tx frame is found in the multicast group
2674         *        membership table.  If the IP multicast address is not found,
2675         *        drop the frame.
2676         *   2 -> Convert multicast frames to unicast, if the IP multicast
2677         *        address from the tx frame is found in the multicast group
2678         *        membership table.  If the IP multicast address is not found,
2679         *        transmit the frame as multicast.
2680         */
2681        __le32 mcast2ucast_mode;
2682
2683        /*
2684         * how much memory to allocate for a tx PPDU dbg log
2685         *
2686         *   This parameter controls how much memory the target will allocate
2687         *   to store a log of tx PPDU meta-information (how large the PPDU
2688         *   was, when it was sent, whether it was successful, etc.)
2689         */
2690        __le32 tx_dbg_log_size;
2691
2692        /* how many AST entries to be allocated for WDS */
2693        __le32 num_wds_entries;
2694
2695        /*
2696         * MAC DMA burst size, e.g., For target PCI limit can be
2697         * 0 -default, 1 256B
2698         */
2699        __le32 dma_burst_size;
2700
2701        /*
2702         * Fixed delimiters to be inserted after every MPDU to
2703         * account for interface latency to avoid underrun.
2704         */
2705        __le32 mac_aggr_delim;
2706
2707        /*
2708         *   determine whether target is responsible for detecting duplicate
2709         *   non-aggregate MPDU and timing out stale fragments.
2710         *
2711         *   A-MPDU reordering is always performed on the target.
2712         *
2713         *   0: target responsible for frag timeout and dup checking
2714         *   1: host responsible for frag timeout and dup checking
2715         */
2716        __le32 rx_skip_defrag_timeout_dup_detection_check;
2717
2718        /*
2719         * Configuration for VoW :
2720         * No of Video Nodes to be supported
2721         * and Max no of descriptors for each Video link (node).
2722         */
2723        __le32 vow_config;
2724
2725        /* Number of msdu descriptors target should use */
2726        __le32 num_msdu_desc;
2727
2728        /*
2729         * Max. number of Tx fragments per MSDU
2730         *  This parameter controls the max number of Tx fragments per MSDU.
2731         *  This is sent by the target as part of the WMI_SERVICE_READY event
2732         *  and is overridden by the OS shim as required.
2733         */
2734        __le32 max_frag_entries;
2735} __packed;
2736
2737enum wmi_10_2_feature_mask {
2738        WMI_10_2_RX_BATCH_MODE = BIT(0),
2739        WMI_10_2_ATF_CONFIG    = BIT(1),
2740        WMI_10_2_COEX_GPIO     = BIT(3),
2741        WMI_10_2_BSS_CHAN_INFO = BIT(6),
2742        WMI_10_2_PEER_STATS    = BIT(7),
2743};
2744
2745struct wmi_resource_config_10_2 {
2746        struct wmi_resource_config_10x common;
2747        __le32 max_peer_ext_stats;
2748        __le32 smart_ant_cap; /* 0-disable, 1-enable */
2749        __le32 bk_min_free;
2750        __le32 be_min_free;
2751        __le32 vi_min_free;
2752        __le32 vo_min_free;
2753        __le32 feature_mask;
2754} __packed;
2755
2756#define NUM_UNITS_IS_NUM_VDEVS         BIT(0)
2757#define NUM_UNITS_IS_NUM_PEERS         BIT(1)
2758#define NUM_UNITS_IS_NUM_ACTIVE_PEERS  BIT(2)
2759
2760struct wmi_resource_config_10_4 {
2761        /* Number of virtual devices (VAPs) to support */
2762        __le32 num_vdevs;
2763
2764        /* Number of peer nodes to support */
2765        __le32 num_peers;
2766
2767        /* Number of active peer nodes to support */
2768        __le32 num_active_peers;
2769
2770        /* In offload mode, target supports features like WOW, chatter and other
2771         * protocol offloads. In order to support them some functionalities like
2772         * reorder buffering, PN checking need to be done in target.
2773         * This determines maximum number of peers supported by target in
2774         * offload mode.
2775         */
2776        __le32 num_offload_peers;
2777
2778        /* Number of reorder buffers available for doing target based reorder
2779         * Rx reorder buffering
2780         */
2781        __le32 num_offload_reorder_buffs;
2782
2783        /* Number of keys per peer */
2784        __le32 num_peer_keys;
2785
2786        /* Total number of TX/RX data TIDs */
2787        __le32 num_tids;
2788
2789        /* Max skid for resolving hash collisions.
2790         * The address search table is sparse, so that if two MAC addresses
2791         * result in the same hash value, the second of these conflicting
2792         * entries can slide to the next index in the address search table,
2793         * and use it, if it is unoccupied.  This ast_skid_limit parameter
2794         * specifies the upper bound on how many subsequent indices to search
2795         * over to find an unoccupied space.
2796         */
2797        __le32 ast_skid_limit;
2798
2799        /* The nominal chain mask for transmit.
2800         * The chain mask may be modified dynamically, e.g. to operate AP tx
2801         * with a reduced number of chains if no clients are associated.
2802         * This configuration parameter specifies the nominal chain-mask that
2803         * should be used when not operating with a reduced set of tx chains.
2804         */
2805        __le32 tx_chain_mask;
2806
2807        /* The nominal chain mask for receive.
2808         * The chain mask may be modified dynamically, e.g. for a client to use
2809         * a reduced number of chains for receive if the traffic to the client
2810         * is low enough that it doesn't require downlink MIMO or antenna
2811         * diversity. This configuration parameter specifies the nominal
2812         * chain-mask that should be used when not operating with a reduced
2813         * set of rx chains.
2814         */
2815        __le32 rx_chain_mask;
2816
2817        /* What rx reorder timeout (ms) to use for the AC.
2818         * Each WMM access class (voice, video, best-effort, background) will
2819         * have its own timeout value to dictate how long to wait for missing
2820         * rx MPDUs to arrive before flushing subsequent MPDUs that have already
2821         * been received. This parameter specifies the timeout in milliseconds
2822         * for each class.
2823         */
2824        __le32 rx_timeout_pri[4];
2825
2826        /* What mode the rx should decap packets to.
2827         * MAC can decap to RAW (no decap), native wifi or Ethernet types.
2828         * This setting also determines the default TX behavior, however TX
2829         * behavior can be modified on a per VAP basis during VAP init
2830         */
2831        __le32 rx_decap_mode;
2832
2833        __le32 scan_max_pending_req;
2834
2835        __le32 bmiss_offload_max_vdev;
2836
2837        __le32 roam_offload_max_vdev;
2838
2839        __le32 roam_offload_max_ap_profiles;
2840
2841        /* How many groups to use for mcast->ucast conversion.
2842         * The target's WAL maintains a table to hold information regarding
2843         * which peers belong to a given multicast group, so that if
2844         * multicast->unicast conversion is enabled, the target can convert
2845         * multicast tx frames to a series of unicast tx frames, to each peer
2846         * within the multicast group. This num_mcast_groups configuration
2847         * parameter tells the target how many multicast groups to provide
2848         * storage for within its multicast group membership table.
2849         */
2850        __le32 num_mcast_groups;
2851
2852        /* Size to alloc for the mcast membership table.
2853         * This num_mcast_table_elems configuration parameter tells the target
2854         * how many peer elements it needs to provide storage for in its
2855         * multicast group membership table. These multicast group membership
2856         * table elements are shared by the multicast groups stored within
2857         * the table.
2858         */
2859        __le32 num_mcast_table_elems;
2860
2861        /* Whether/how to do multicast->unicast conversion.
2862         * This configuration parameter specifies whether the target should
2863         * perform multicast --> unicast conversion on transmit, and if so,
2864         * what to do if it finds no entries in its multicast group membership
2865         * table for the multicast IP address in the tx frame.
2866         * Configuration value:
2867         * 0 -> Do not perform multicast to unicast conversion.
2868         * 1 -> Convert multicast frames to unicast, if the IP multicast address
2869         *      from the tx frame is found in the multicast group membership
2870         *      table.  If the IP multicast address is not found, drop the frame
2871         * 2 -> Convert multicast frames to unicast, if the IP multicast address
2872         *      from the tx frame is found in the multicast group membership
2873         *      table.  If the IP multicast address is not found, transmit the
2874         *      frame as multicast.
2875         */
2876        __le32 mcast2ucast_mode;
2877
2878        /* How much memory to allocate for a tx PPDU dbg log.
2879         * This parameter controls how much memory the target will allocate to
2880         * store a log of tx PPDU meta-information (how large the PPDU was,
2881         * when it was sent, whether it was successful, etc.)
2882         */
2883        __le32 tx_dbg_log_size;
2884
2885        /* How many AST entries to be allocated for WDS */
2886        __le32 num_wds_entries;
2887
2888        /* MAC DMA burst size. 0 -default, 1 -256B */
2889        __le32 dma_burst_size;
2890
2891        /* Fixed delimiters to be inserted after every MPDU to account for
2892         * interface latency to avoid underrun.
2893         */
2894        __le32 mac_aggr_delim;
2895
2896        /* Determine whether target is responsible for detecting duplicate
2897         * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering
2898         * is always performed on the target.
2899         *
2900         * 0: target responsible for frag timeout and dup checking
2901         * 1: host responsible for frag timeout and dup checking
2902         */
2903        __le32 rx_skip_defrag_timeout_dup_detection_check;
2904
2905        /* Configuration for VoW : No of Video nodes to be supported and max
2906         * no of descriptors for each video link (node).
2907         */
2908        __le32 vow_config;
2909
2910        /* Maximum vdev that could use gtk offload */
2911        __le32 gtk_offload_max_vdev;
2912
2913        /* Number of msdu descriptors target should use */
2914        __le32 num_msdu_desc;
2915
2916        /* Max number of tx fragments per MSDU.
2917         * This parameter controls the max number of tx fragments per MSDU.
2918         * This will passed by target as part of the WMI_SERVICE_READY event
2919         * and is overridden by the OS shim as required.
2920         */
2921        __le32 max_frag_entries;
2922
2923        /* Max number of extended peer stats.
2924         * This parameter controls the max number of peers for which extended
2925         * statistics are supported by target
2926         */
2927        __le32 max_peer_ext_stats;
2928
2929        /* Smart antenna capabilities information.
2930         * 1 - Smart antenna is enabled
2931         * 0 - Smart antenna is disabled
2932         * In future this can contain smart antenna specific capabilities.
2933         */
2934        __le32 smart_ant_cap;
2935
2936        /* User can configure the buffers allocated for each AC (BE, BK, VI, VO)
2937         * during init.
2938         */
2939        __le32 bk_minfree;
2940        __le32 be_minfree;
2941        __le32 vi_minfree;
2942        __le32 vo_minfree;
2943
2944        /* Rx batch mode capability.
2945         * 1 - Rx batch mode enabled
2946         * 0 - Rx batch mode disabled
2947         */
2948        __le32 rx_batchmode;
2949
2950        /* Thermal throttling capability.
2951         * 1 - Capable of thermal throttling
2952         * 0 - Not capable of thermal throttling
2953         */
2954        __le32 tt_support;
2955
2956        /* ATF configuration.
2957         * 1  - Enable ATF
2958         * 0  - Disable ATF
2959         */
2960        __le32 atf_config;
2961
2962        /* Configure padding to manage IP header un-alignment
2963         * 1  - Enable padding
2964         * 0  - Disable padding
2965         */
2966        __le32 iphdr_pad_config;
2967
2968        /* qwrap configuration (bits 15-0)
2969         * 1  - This is qwrap configuration
2970         * 0  - This is not qwrap
2971         *
2972         * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables)
2973         * In order to get ack-RSSI reporting and to specify the tx-rate for
2974         * individual frames, this option must be enabled.  This uses an extra
2975         * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it.
2976         */
2977        __le32 qwrap_config;
2978} __packed;
2979
2980enum wmi_coex_version {
2981        WMI_NO_COEX_VERSION_SUPPORT     = 0,
2982        /* 3 wire coex support*/
2983        WMI_COEX_VERSION_1              = 1,
2984        /* 2.5 wire coex support*/
2985        WMI_COEX_VERSION_2              = 2,
2986        /* 2.5 wire coex with duty cycle support */
2987        WMI_COEX_VERSION_3              = 3,
2988        /* 4 wire coex support*/
2989        WMI_COEX_VERSION_4              = 4,
2990};
2991
2992/**
2993 * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags
2994 * @WMI_10_4_LTEU_SUPPORT: LTEU config
2995 * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config
2996 * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan
2997 * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan
2998 * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats
2999 * @WMI_10_4_PEER_STATS: Per station stats
3000 * @WMI_10_4_VDEV_STATS: Per vdev stats
3001 * @WMI_10_4_TDLS: Implicit TDLS support in firmware enable/disable
3002 * @WMI_10_4_TDLS_OFFCHAN: TDLS offchannel support enable/disable
3003 * @WMI_10_4_TDLS_UAPSD_BUFFER_STA: TDLS buffer sta support enable/disable
3004 * @WMI_10_4_TDLS_UAPSD_SLEEP_STA: TDLS sleep sta support enable/disable
3005 * @WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE: TDLS connection tracker in host
3006 *      enable/disable
3007 * @WMI_10_4_TDLS_EXPLICIT_MODE_ONLY:Explicit TDLS mode enable/disable
3008 * @WMI_10_4_TX_DATA_ACK_RSSI: Enable DATA ACK RSSI if firmware is capable
3009 */
3010enum wmi_10_4_feature_mask {
3011        WMI_10_4_LTEU_SUPPORT                   = BIT(0),
3012        WMI_10_4_COEX_GPIO_SUPPORT              = BIT(1),
3013        WMI_10_4_AUX_RADIO_SPECTRAL_INTF        = BIT(2),
3014        WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF       = BIT(3),
3015        WMI_10_4_BSS_CHANNEL_INFO_64            = BIT(4),
3016        WMI_10_4_PEER_STATS                     = BIT(5),
3017        WMI_10_4_VDEV_STATS                     = BIT(6),
3018        WMI_10_4_TDLS                           = BIT(7),
3019        WMI_10_4_TDLS_OFFCHAN                   = BIT(8),
3020        WMI_10_4_TDLS_UAPSD_BUFFER_STA          = BIT(9),
3021        WMI_10_4_TDLS_UAPSD_SLEEP_STA           = BIT(10),
3022        WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE = BIT(11),
3023        WMI_10_4_TDLS_EXPLICIT_MODE_ONLY        = BIT(12),
3024        WMI_10_4_TX_DATA_ACK_RSSI               = BIT(16),
3025        WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT   = BIT(17),
3026        WMI_10_4_REPORT_AIRTIME                 = BIT(18),
3027
3028};
3029
3030struct wmi_ext_resource_config_10_4_cmd {
3031        /* contains enum wmi_host_platform_type */
3032        __le32 host_platform_config;
3033        /* see enum wmi_10_4_feature_mask */
3034        __le32 fw_feature_bitmap;
3035        /* WLAN priority GPIO number */
3036        __le32 wlan_gpio_priority;
3037        /* see enum wmi_coex_version */
3038        __le32 coex_version;
3039        /* COEX GPIO config */
3040        __le32 coex_gpio_pin1;
3041        __le32 coex_gpio_pin2;
3042        __le32 coex_gpio_pin3;
3043        /* number of vdevs allowed to perform tdls */
3044        __le32 num_tdls_vdevs;
3045        /* number of peers to track per TDLS vdev */
3046        __le32 num_tdls_conn_table_entries;
3047        /* number of tdls sleep sta supported */
3048        __le32 max_tdls_concurrent_sleep_sta;
3049        /* number of tdls buffer sta supported */
3050        __le32 max_tdls_concurrent_buffer_sta;
3051};
3052
3053/* structure describing host memory chunk. */
3054struct host_memory_chunk {
3055        /* id of the request that is passed up in service ready */
3056        __le32 req_id;
3057        /* the physical address the memory chunk */
3058        __le32 ptr;
3059        /* size of the chunk */
3060        __le32 size;
3061} __packed;
3062
3063#define WMI_IRAM_RECOVERY_HOST_MEM_REQ_ID 8
3064
3065struct wmi_host_mem_chunks {
3066        __le32 count;
3067        /* some fw revisions require at least 1 chunk regardless of count */
3068        struct host_memory_chunk items[1];
3069} __packed;
3070
3071struct wmi_init_cmd {
3072        struct wmi_resource_config resource_config;
3073        struct wmi_host_mem_chunks mem_chunks;
3074} __packed;
3075
3076/* _10x structure is from 10.X FW API */
3077struct wmi_init_cmd_10x {
3078        struct wmi_resource_config_10x resource_config;
3079        struct wmi_host_mem_chunks mem_chunks;
3080} __packed;
3081
3082struct wmi_init_cmd_10_2 {
3083        struct wmi_resource_config_10_2 resource_config;
3084        struct wmi_host_mem_chunks mem_chunks;
3085} __packed;
3086
3087struct wmi_init_cmd_10_4 {
3088        struct wmi_resource_config_10_4 resource_config;
3089        struct wmi_host_mem_chunks mem_chunks;
3090} __packed;
3091
3092struct wmi_chan_list_entry {
3093        __le16 freq;
3094        u8 phy_mode; /* valid for 10.2 only */
3095        u8 reserved;
3096} __packed;
3097
3098/* TLV for channel list */
3099struct wmi_chan_list {
3100        __le32 tag; /* WMI_CHAN_LIST_TAG */
3101        __le32 num_chan;
3102        struct wmi_chan_list_entry channel_list[];
3103} __packed;
3104
3105struct wmi_bssid_list {
3106        __le32 tag; /* WMI_BSSID_LIST_TAG */
3107        __le32 num_bssid;
3108        struct wmi_mac_addr bssid_list[];
3109} __packed;
3110
3111struct wmi_ie_data {
3112        __le32 tag; /* WMI_IE_TAG */
3113        __le32 ie_len;
3114        u8 ie_data[];
3115} __packed;
3116
3117struct wmi_ssid {
3118        __le32 ssid_len;
3119        u8 ssid[32];
3120} __packed;
3121
3122struct wmi_ssid_list {
3123        __le32 tag; /* WMI_SSID_LIST_TAG */
3124        __le32 num_ssids;
3125        struct wmi_ssid ssids[];
3126} __packed;
3127
3128/* prefix used by scan requestor ids on the host */
3129#define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000
3130
3131/* prefix used by scan request ids generated on the host */
3132/* host cycles through the lower 12 bits to generate ids */
3133#define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000
3134
3135#define WLAN_SCAN_PARAMS_MAX_SSID    16
3136#define WLAN_SCAN_PARAMS_MAX_BSSID   4
3137#define WLAN_SCAN_PARAMS_MAX_IE_LEN  256
3138
3139/* Values lower than this may be refused by some firmware revisions with a scan
3140 * completion with a timedout reason.
3141 */
3142#define WMI_SCAN_CHAN_MIN_TIME_MSEC 40
3143
3144/* Scan priority numbers must be sequential, starting with 0 */
3145enum wmi_scan_priority {
3146        WMI_SCAN_PRIORITY_VERY_LOW = 0,
3147        WMI_SCAN_PRIORITY_LOW,
3148        WMI_SCAN_PRIORITY_MEDIUM,
3149        WMI_SCAN_PRIORITY_HIGH,
3150        WMI_SCAN_PRIORITY_VERY_HIGH,
3151        WMI_SCAN_PRIORITY_COUNT   /* number of priorities supported */
3152};
3153
3154struct wmi_start_scan_common {
3155        /* Scan ID */
3156        __le32 scan_id;
3157        /* Scan requestor ID */
3158        __le32 scan_req_id;
3159        /* VDEV id(interface) that is requesting scan */
3160        __le32 vdev_id;
3161        /* Scan Priority, input to scan scheduler */
3162        __le32 scan_priority;
3163        /* Scan events subscription */
3164        __le32 notify_scan_events;
3165        /* dwell time in msec on active channels */
3166        __le32 dwell_time_active;
3167        /* dwell time in msec on passive channels */
3168        __le32 dwell_time_passive;
3169        /*
3170         * min time in msec on the BSS channel,only valid if atleast one
3171         * VDEV is active
3172         */
3173        __le32 min_rest_time;
3174        /*
3175         * max rest time in msec on the BSS channel,only valid if at least
3176         * one VDEV is active
3177         */
3178        /*
3179         * the scanner will rest on the bss channel at least min_rest_time
3180         * after min_rest_time the scanner will start checking for tx/rx
3181         * activity on all VDEVs. if there is no activity the scanner will
3182         * switch to off channel. if there is activity the scanner will let
3183         * the radio on the bss channel until max_rest_time expires.at
3184         * max_rest_time scanner will switch to off channel irrespective of
3185         * activity. activity is determined by the idle_time parameter.
3186         */
3187        __le32 max_rest_time;
3188        /*
3189         * time before sending next set of probe requests.
3190         * The scanner keeps repeating probe requests transmission with
3191         * period specified by repeat_probe_time.
3192         * The number of probe requests specified depends on the ssid_list
3193         * and bssid_list
3194         */
3195        __le32 repeat_probe_time;
3196        /* time in msec between 2 consequetive probe requests with in a set. */
3197        __le32 probe_spacing_time;
3198        /*
3199         * data inactivity time in msec on bss channel that will be used by
3200         * scanner for measuring the inactivity.
3201         */
3202        __le32 idle_time;
3203        /* maximum time in msec allowed for scan  */
3204        __le32 max_scan_time;
3205        /*
3206         * delay in msec before sending first probe request after switching
3207         * to a channel
3208         */
3209        __le32 probe_delay;
3210        /* Scan control flags */
3211        __le32 scan_ctrl_flags;
3212} __packed;
3213
3214struct wmi_start_scan_tlvs {
3215        /* TLV parameters. These includes channel list, ssid list, bssid list,
3216         * extra ies.
3217         */
3218        u8 tlvs[0];
3219} __packed;
3220
3221struct wmi_start_scan_cmd {
3222        struct wmi_start_scan_common common;
3223        __le32 burst_duration_ms;
3224        struct wmi_start_scan_tlvs tlvs;
3225} __packed;
3226
3227/* This is the definition from 10.X firmware branch */
3228struct wmi_10x_start_scan_cmd {
3229        struct wmi_start_scan_common common;
3230        struct wmi_start_scan_tlvs tlvs;
3231} __packed;
3232
3233struct wmi_ssid_arg {
3234        int len;
3235        const u8 *ssid;
3236};
3237
3238struct wmi_bssid_arg {
3239        const u8 *bssid;
3240};
3241
3242struct wmi_start_scan_arg {
3243        u32 scan_id;
3244        u32 scan_req_id;
3245        u32 vdev_id;
3246        u32 scan_priority;
3247        u32 notify_scan_events;
3248        u32 dwell_time_active;
3249        u32 dwell_time_passive;
3250        u32 min_rest_time;
3251        u32 max_rest_time;
3252        u32 repeat_probe_time;
3253        u32 probe_spacing_time;
3254        u32 idle_time;
3255        u32 max_scan_time;
3256        u32 probe_delay;
3257        u32 scan_ctrl_flags;
3258        u32 burst_duration_ms;
3259
3260        u32 ie_len;
3261        u32 n_channels;
3262        u32 n_ssids;
3263        u32 n_bssids;
3264
3265        u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN];
3266        u16 channels[64];
3267        struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID];
3268        struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID];
3269        struct wmi_mac_addr mac_addr;
3270        struct wmi_mac_addr mac_mask;
3271};
3272
3273/* scan control flags */
3274
3275/* passively scan all channels including active channels */
3276#define WMI_SCAN_FLAG_PASSIVE        0x1
3277/* add wild card ssid probe request even though ssid_list is specified. */
3278#define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2
3279/* add cck rates to rates/xrate ie for the generated probe request */
3280#define WMI_SCAN_ADD_CCK_RATES 0x4
3281/* add ofdm rates to rates/xrate ie for the generated probe request */
3282#define WMI_SCAN_ADD_OFDM_RATES 0x8
3283/* To enable indication of Chan load and Noise floor to host */
3284#define WMI_SCAN_CHAN_STAT_EVENT 0x10
3285/* Filter Probe request frames  */
3286#define WMI_SCAN_FILTER_PROBE_REQ 0x20
3287/* When set, DFS channels will not be scanned */
3288#define WMI_SCAN_BYPASS_DFS_CHN 0x40
3289/* Different FW scan engine may choose to bail out on errors.
3290 * Allow the driver to have influence over that.
3291 */
3292#define WMI_SCAN_CONTINUE_ON_ERROR 0x80
3293
3294/* Use random MAC address for TA for Probe Request frame and add
3295 * OUI specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the Probe Request frame.
3296 * if OUI is not set by WMI_SCAN_PROB_REQ_OUI_CMDID then the flag is ignored.
3297 */
3298#define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ   0x1000
3299
3300/* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */
3301#define WMI_SCAN_CLASS_MASK 0xFF000000
3302
3303enum wmi_stop_scan_type {
3304        WMI_SCAN_STOP_ONE       = 0x00000000, /* stop by scan_id */
3305        WMI_SCAN_STOP_VDEV_ALL  = 0x01000000, /* stop by vdev_id */
3306        WMI_SCAN_STOP_ALL       = 0x04000000, /* stop all scans */
3307};
3308
3309struct wmi_stop_scan_cmd {
3310        __le32 scan_req_id;
3311        __le32 scan_id;
3312        __le32 req_type;
3313        __le32 vdev_id;
3314} __packed;
3315
3316struct wmi_stop_scan_arg {
3317        u32 req_id;
3318        enum wmi_stop_scan_type req_type;
3319        union {
3320                u32 scan_id;
3321                u32 vdev_id;
3322        } u;
3323};
3324
3325struct wmi_scan_chan_list_cmd {
3326        __le32 num_scan_chans;
3327        struct wmi_channel chan_info[];
3328} __packed;
3329
3330struct wmi_scan_chan_list_arg {
3331        u32 n_channels;
3332        struct wmi_channel_arg *channels;
3333};
3334
3335enum wmi_bss_filter {
3336        WMI_BSS_FILTER_NONE = 0,        /* no beacons forwarded */
3337        WMI_BSS_FILTER_ALL,             /* all beacons forwarded */
3338        WMI_BSS_FILTER_PROFILE,         /* only beacons matching profile */
3339        WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */
3340        WMI_BSS_FILTER_CURRENT_BSS,     /* only beacons matching current BSS */
3341        WMI_BSS_FILTER_ALL_BUT_BSS,     /* all but beacons matching BSS */
3342        WMI_BSS_FILTER_PROBED_SSID,     /* beacons matching probed ssid */
3343        WMI_BSS_FILTER_LAST_BSS,        /* marker only */
3344};
3345
3346enum wmi_scan_event_type {
3347        WMI_SCAN_EVENT_STARTED              = BIT(0),
3348        WMI_SCAN_EVENT_COMPLETED            = BIT(1),
3349        WMI_SCAN_EVENT_BSS_CHANNEL          = BIT(2),
3350        WMI_SCAN_EVENT_FOREIGN_CHANNEL      = BIT(3),
3351        WMI_SCAN_EVENT_DEQUEUED             = BIT(4),
3352        /* possibly by high-prio scan */
3353        WMI_SCAN_EVENT_PREEMPTED            = BIT(5),
3354        WMI_SCAN_EVENT_START_FAILED         = BIT(6),
3355        WMI_SCAN_EVENT_RESTARTED            = BIT(7),
3356        WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8),
3357        WMI_SCAN_EVENT_MAX                  = BIT(15),
3358};
3359
3360enum wmi_scan_completion_reason {
3361        WMI_SCAN_REASON_COMPLETED,
3362        WMI_SCAN_REASON_CANCELLED,
3363        WMI_SCAN_REASON_PREEMPTED,
3364        WMI_SCAN_REASON_TIMEDOUT,
3365        WMI_SCAN_REASON_INTERNAL_FAILURE,
3366        WMI_SCAN_REASON_MAX,
3367};
3368
3369struct wmi_scan_event {
3370        __le32 event_type; /* %WMI_SCAN_EVENT_ */
3371        __le32 reason; /* %WMI_SCAN_REASON_ */
3372        __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
3373        __le32 scan_req_id;
3374        __le32 scan_id;
3375        __le32 vdev_id;
3376} __packed;
3377
3378/*
3379 * This defines how much headroom is kept in the
3380 * receive frame between the descriptor and the
3381 * payload, in order for the WMI PHY error and
3382 * management handler to insert header contents.
3383 *
3384 * This is in bytes.
3385 */
3386#define WMI_MGMT_RX_HDR_HEADROOM    52
3387
3388/*
3389 * This event will be used for sending scan results
3390 * as well as rx mgmt frames to the host. The rx buffer
3391 * will be sent as part of this WMI event. It would be a
3392 * good idea to pass all the fields in the RX status
3393 * descriptor up to the host.
3394 */
3395struct wmi_mgmt_rx_hdr_v1 {
3396        __le32 channel;
3397        __le32 snr;
3398        __le32 rate;
3399        __le32 phy_mode;
3400        __le32 buf_len;
3401        __le32 status; /* %WMI_RX_STATUS_ */
3402} __packed;
3403
3404struct wmi_mgmt_rx_hdr_v2 {
3405        struct wmi_mgmt_rx_hdr_v1 v1;
3406        __le32 rssi_ctl[4];
3407} __packed;
3408
3409struct wmi_mgmt_rx_event_v1 {
3410        struct wmi_mgmt_rx_hdr_v1 hdr;
3411        u8 buf[];
3412} __packed;
3413
3414struct wmi_mgmt_rx_event_v2 {
3415        struct wmi_mgmt_rx_hdr_v2 hdr;
3416        u8 buf[];
3417} __packed;
3418
3419struct wmi_10_4_mgmt_rx_hdr {
3420        __le32 channel;
3421        __le32 snr;
3422            u8 rssi_ctl[4];
3423        __le32 rate;
3424        __le32 phy_mode;
3425        __le32 buf_len;
3426        __le32 status;
3427} __packed;
3428
3429struct wmi_10_4_mgmt_rx_event {
3430        struct wmi_10_4_mgmt_rx_hdr hdr;
3431        u8 buf[];
3432} __packed;
3433
3434struct wmi_mgmt_rx_ext_info {
3435        __le64 rx_mac_timestamp;
3436} __packed __aligned(4);
3437
3438#define WMI_RX_STATUS_OK                        0x00
3439#define WMI_RX_STATUS_ERR_CRC                   0x01
3440#define WMI_RX_STATUS_ERR_DECRYPT               0x08
3441#define WMI_RX_STATUS_ERR_MIC                   0x10
3442#define WMI_RX_STATUS_ERR_KEY_CACHE_MISS        0x20
3443/* Extension data at the end of mgmt frame */
3444#define WMI_RX_STATUS_EXT_INFO          0x40
3445
3446#define PHY_ERROR_GEN_SPECTRAL_SCAN             0x26
3447#define PHY_ERROR_GEN_FALSE_RADAR_EXT           0x24
3448#define PHY_ERROR_GEN_RADAR                     0x05
3449
3450#define PHY_ERROR_10_4_RADAR_MASK               0x4
3451#define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK       0x4000000
3452
3453enum phy_err_type {
3454        PHY_ERROR_UNKNOWN,
3455        PHY_ERROR_SPECTRAL_SCAN,
3456        PHY_ERROR_FALSE_RADAR_EXT,
3457        PHY_ERROR_RADAR
3458};
3459
3460struct wmi_phyerr {
3461        __le32 tsf_timestamp;
3462        __le16 freq1;
3463        __le16 freq2;
3464        u8 rssi_combined;
3465        u8 chan_width_mhz;
3466        u8 phy_err_code;
3467        u8 rsvd0;
3468        __le32 rssi_chains[4];
3469        __le16 nf_chains[4];
3470        __le32 buf_len;
3471        u8 buf[];
3472} __packed;
3473
3474struct wmi_phyerr_event {
3475        __le32 num_phyerrs;
3476        __le32 tsf_l32;
3477        __le32 tsf_u32;
3478        struct wmi_phyerr phyerrs[];
3479} __packed;
3480
3481struct wmi_10_4_phyerr_event {
3482        __le32 tsf_l32;
3483        __le32 tsf_u32;
3484        __le16 freq1;
3485        __le16 freq2;
3486        u8 rssi_combined;
3487        u8 chan_width_mhz;
3488        u8 phy_err_code;
3489        u8 rsvd0;
3490        __le32 rssi_chains[4];
3491        __le16 nf_chains[4];
3492        __le32 phy_err_mask[2];
3493        __le32 tsf_timestamp;
3494        __le32 buf_len;
3495        u8 buf[];
3496} __packed;
3497
3498struct wmi_radar_found_info {
3499        __le32 pri_min;
3500        __le32 pri_max;
3501        __le32 width_min;
3502        __le32 width_max;
3503        __le32 sidx_min;
3504        __le32 sidx_max;
3505} __packed;
3506
3507enum wmi_radar_confirmation_status {
3508        /* Detected radar was due to SW pulses */
3509        WMI_SW_RADAR_DETECTED    = 0,
3510
3511        WMI_RADAR_DETECTION_FAIL = 1,
3512
3513        /* Real radar detected */
3514        WMI_HW_RADAR_DETECTED    = 2,
3515};
3516
3517#define PHYERR_TLV_SIG                          0xBB
3518#define PHYERR_TLV_TAG_SEARCH_FFT_REPORT        0xFB
3519#define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY      0xF8
3520#define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT  0xF9
3521
3522struct phyerr_radar_report {
3523        __le32 reg0; /* RADAR_REPORT_REG0_* */
3524        __le32 reg1; /* RADAR_REPORT_REG1_* */
3525} __packed;
3526
3527#define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK           0x80000000
3528#define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB            31
3529
3530#define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK       0x40000000
3531#define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB        30
3532
3533#define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK           0x3FF00000
3534#define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB            20
3535
3536#define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK         0x000F0000
3537#define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB          16
3538
3539#define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK         0x0000FC00
3540#define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB          10
3541
3542#define RADAR_REPORT_REG0_PULSE_SIDX_MASK               0x000003FF
3543#define RADAR_REPORT_REG0_PULSE_SIDX_LSB                0
3544
3545#define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK     0x80000000
3546#define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB      31
3547
3548#define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK        0x7F000000
3549#define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB         24
3550
3551#define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK       0x00FF0000
3552#define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB        16
3553
3554#define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK         0x0000FF00
3555#define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB          8
3556
3557#define RADAR_REPORT_REG1_PULSE_DUR_MASK                0x000000FF
3558#define RADAR_REPORT_REG1_PULSE_DUR_LSB                 0
3559
3560struct phyerr_fft_report {
3561        __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */
3562        __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */
3563} __packed;
3564
3565#define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK       0xFF800000
3566#define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB        23
3567
3568#define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK         0x007FC000
3569#define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB          14
3570
3571#define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK         0x00003000
3572#define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB          12
3573
3574#define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK           0x00000FFF
3575#define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB            0
3576
3577#define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK           0xFC000000
3578#define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB            26
3579
3580#define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK           0x03FC0000
3581#define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB            18
3582
3583#define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK            0x0003FF00
3584#define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB             8
3585
3586#define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK     0x000000FF
3587#define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB      0
3588
3589struct phyerr_tlv {
3590        __le16 len;
3591        u8 tag;
3592        u8 sig;
3593} __packed;
3594
3595#define DFS_RSSI_POSSIBLY_FALSE                 50
3596#define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE       40
3597
3598struct wmi_mgmt_tx_hdr {
3599        __le32 vdev_id;
3600        struct wmi_mac_addr peer_macaddr;
3601        __le32 tx_rate;
3602        __le32 tx_power;
3603        __le32 buf_len;
3604} __packed;
3605
3606struct wmi_mgmt_tx_cmd {
3607        struct wmi_mgmt_tx_hdr hdr;
3608        u8 buf[];
3609} __packed;
3610
3611struct wmi_echo_event {
3612        __le32 value;
3613} __packed;
3614
3615struct wmi_echo_cmd {
3616        __le32 value;
3617} __packed;
3618
3619struct wmi_pdev_set_regdomain_cmd {
3620        __le32 reg_domain;
3621        __le32 reg_domain_2G;
3622        __le32 reg_domain_5G;
3623        __le32 conformance_test_limit_2G;
3624        __le32 conformance_test_limit_5G;
3625} __packed;
3626
3627enum wmi_dfs_region {
3628        /* Uninitialized dfs domain */
3629        WMI_UNINIT_DFS_DOMAIN = 0,
3630
3631        /* FCC3 dfs domain */
3632        WMI_FCC_DFS_DOMAIN = 1,
3633
3634        /* ETSI dfs domain */
3635        WMI_ETSI_DFS_DOMAIN = 2,
3636
3637        /*Japan dfs domain */
3638        WMI_MKK4_DFS_DOMAIN = 3,
3639};
3640
3641struct wmi_pdev_set_regdomain_cmd_10x {
3642        __le32 reg_domain;
3643        __le32 reg_domain_2G;
3644        __le32 reg_domain_5G;
3645        __le32 conformance_test_limit_2G;
3646        __le32 conformance_test_limit_5G;
3647
3648        /* dfs domain from wmi_dfs_region */
3649        __le32 dfs_domain;
3650} __packed;
3651
3652/* Command to set/unset chip in quiet mode */
3653struct wmi_pdev_set_quiet_cmd {
3654        /* period in TUs */
3655        __le32 period;
3656
3657        /* duration in TUs */
3658        __le32 duration;
3659
3660        /* offset in TUs */
3661        __le32 next_start;
3662
3663        /* enable/disable */
3664        __le32 enabled;
3665} __packed;
3666
3667/*
3668 * 802.11g protection mode.
3669 */
3670enum ath10k_protmode {
3671        ATH10K_PROT_NONE     = 0,    /* no protection */
3672        ATH10K_PROT_CTSONLY  = 1,    /* CTS to self */
3673        ATH10K_PROT_RTSCTS   = 2,    /* RTS-CTS */
3674};
3675
3676enum wmi_rtscts_profile {
3677        WMI_RTSCTS_FOR_NO_RATESERIES = 0,
3678        WMI_RTSCTS_FOR_SECOND_RATESERIES,
3679        WMI_RTSCTS_ACROSS_SW_RETRIES
3680};
3681
3682#define WMI_RTSCTS_ENABLED              1
3683#define WMI_RTSCTS_SET_MASK             0x0f
3684#define WMI_RTSCTS_SET_LSB              0
3685
3686#define WMI_RTSCTS_PROFILE_MASK         0xf0
3687#define WMI_RTSCTS_PROFILE_LSB          4
3688
3689enum wmi_beacon_gen_mode {
3690        WMI_BEACON_STAGGERED_MODE = 0,
3691        WMI_BEACON_BURST_MODE = 1
3692};
3693
3694enum wmi_csa_event_ies_present_flag {
3695        WMI_CSA_IE_PRESENT = 0x00000001,
3696        WMI_XCSA_IE_PRESENT = 0x00000002,
3697        WMI_WBW_IE_PRESENT = 0x00000004,
3698        WMI_CSWARP_IE_PRESENT = 0x00000008,
3699};
3700
3701/* wmi CSA receive event from beacon frame */
3702struct wmi_csa_event {
3703        __le32 i_fc_dur;
3704        /* Bit 0-15: FC */
3705        /* Bit 16-31: DUR */
3706        struct wmi_mac_addr i_addr1;
3707        struct wmi_mac_addr i_addr2;
3708        __le32 csa_ie[2];
3709        __le32 xcsa_ie[2];
3710        __le32 wb_ie[2];
3711        __le32 cswarp_ie;
3712        __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */
3713} __packed;
3714
3715/* the definition of different PDEV parameters */
3716#define PDEV_DEFAULT_STATS_UPDATE_PERIOD    500
3717#define VDEV_DEFAULT_STATS_UPDATE_PERIOD    500
3718#define PEER_DEFAULT_STATS_UPDATE_PERIOD    500
3719
3720struct wmi_pdev_param_map {
3721        u32 tx_chain_mask;
3722        u32 rx_chain_mask;
3723        u32 txpower_limit2g;
3724        u32 txpower_limit5g;
3725        u32 txpower_scale;
3726        u32 beacon_gen_mode;
3727        u32 beacon_tx_mode;
3728        u32 resmgr_offchan_mode;
3729        u32 protection_mode;
3730        u32 dynamic_bw;
3731        u32 non_agg_sw_retry_th;
3732        u32 agg_sw_retry_th;
3733        u32 sta_kickout_th;
3734        u32 ac_aggrsize_scaling;
3735        u32 ltr_enable;
3736        u32 ltr_ac_latency_be;
3737        u32 ltr_ac_latency_bk;
3738        u32 ltr_ac_latency_vi;
3739        u32 ltr_ac_latency_vo;
3740        u32 ltr_ac_latency_timeout;
3741        u32 ltr_sleep_override;
3742        u32 ltr_rx_override;
3743        u32 ltr_tx_activity_timeout;
3744        u32 l1ss_enable;
3745        u32 dsleep_enable;
3746        u32 pcielp_txbuf_flush;
3747        u32 pcielp_txbuf_watermark;
3748        u32 pcielp_txbuf_tmo_en;
3749        u32 pcielp_txbuf_tmo_value;
3750        u32 pdev_stats_update_period;
3751        u32 vdev_stats_update_period;
3752        u32 peer_stats_update_period;
3753        u32 bcnflt_stats_update_period;
3754        u32 pmf_qos;
3755        u32 arp_ac_override;
3756        u32 dcs;
3757        u32 ani_enable;
3758        u32 ani_poll_period;
3759        u32 ani_listen_period;
3760        u32 ani_ofdm_level;
3761        u32 ani_cck_level;
3762        u32 dyntxchain;
3763        u32 proxy_sta;
3764        u32 idle_ps_config;
3765        u32 power_gating_sleep;
3766        u32 fast_channel_reset;
3767        u32 burst_dur;
3768        u32 burst_enable;
3769        u32 cal_period;
3770        u32 aggr_burst;
3771        u32 rx_decap_mode;
3772        u32 smart_antenna_default_antenna;
3773        u32 igmpmld_override;
3774        u32 igmpmld_tid;
3775        u32 antenna_gain;
3776        u32 rx_filter;
3777        u32 set_mcast_to_ucast_tid;
3778        u32 proxy_sta_mode;
3779        u32 set_mcast2ucast_mode;
3780        u32 set_mcast2ucast_buffer;
3781        u32 remove_mcast2ucast_buffer;
3782        u32 peer_sta_ps_statechg_enable;
3783        u32 igmpmld_ac_override;
3784        u32 block_interbss;
3785        u32 set_disable_reset_cmdid;
3786        u32 set_msdu_ttl_cmdid;
3787        u32 set_ppdu_duration_cmdid;
3788        u32 txbf_sound_period_cmdid;
3789        u32 set_promisc_mode_cmdid;
3790        u32 set_burst_mode_cmdid;
3791        u32 en_stats;
3792        u32 mu_group_policy;
3793        u32 noise_detection;
3794        u32 noise_threshold;
3795        u32 dpd_enable;
3796        u32 set_mcast_bcast_echo;
3797        u32 atf_strict_sch;
3798        u32 atf_sched_duration;
3799        u32 ant_plzn;
3800        u32 mgmt_retry_limit;
3801        u32 sensitivity_level;
3802        u32 signed_txpower_2g;
3803        u32 signed_txpower_5g;
3804        u32 enable_per_tid_amsdu;
3805        u32 enable_per_tid_ampdu;
3806        u32 cca_threshold;
3807        u32 rts_fixed_rate;
3808        u32 pdev_reset;
3809        u32 wapi_mbssid_offset;
3810        u32 arp_srcaddr;
3811        u32 arp_dstaddr;
3812        u32 enable_btcoex;
3813        u32 rfkill_config;
3814        u32 rfkill_enable;
3815        u32 peer_stats_info_enable;
3816};
3817
3818#define WMI_PDEV_PARAM_UNSUPPORTED 0
3819
3820enum wmi_pdev_param {
3821        /* TX chain mask */
3822        WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3823        /* RX chain mask */
3824        WMI_PDEV_PARAM_RX_CHAIN_MASK,
3825        /* TX power limit for 2G Radio */
3826        WMI_PDEV_PARAM_TXPOWER_LIMIT2G,
3827        /* TX power limit for 5G Radio */
3828        WMI_PDEV_PARAM_TXPOWER_LIMIT5G,
3829        /* TX power scale */
3830        WMI_PDEV_PARAM_TXPOWER_SCALE,
3831        /* Beacon generation mode . 0: host, 1: target   */
3832        WMI_PDEV_PARAM_BEACON_GEN_MODE,
3833        /* Beacon generation mode . 0: staggered 1: bursted   */
3834        WMI_PDEV_PARAM_BEACON_TX_MODE,
3835        /*
3836         * Resource manager off chan mode .
3837         * 0: turn off offchan mode. 1: turn on offchan mode
3838         */
3839        WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3840        /*
3841         * Protection mode:
3842         * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3843         */
3844        WMI_PDEV_PARAM_PROTECTION_MODE,
3845        /*
3846         * Dynamic bandwidth - 0: disable, 1: enable
3847         *
3848         * When enabled HW rate control tries different bandwidths when
3849         * retransmitting frames.
3850         */
3851        WMI_PDEV_PARAM_DYNAMIC_BW,
3852        /* Non aggregrate/ 11g sw retry threshold.0-disable */
3853        WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3854        /* aggregrate sw retry threshold. 0-disable*/
3855        WMI_PDEV_PARAM_AGG_SW_RETRY_TH,
3856        /* Station kickout threshold (non of consecutive failures).0-disable */
3857        WMI_PDEV_PARAM_STA_KICKOUT_TH,
3858        /* Aggerate size scaling configuration per AC */
3859        WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3860        /* LTR enable */
3861        WMI_PDEV_PARAM_LTR_ENABLE,
3862        /* LTR latency for BE, in us */
3863        WMI_PDEV_PARAM_LTR_AC_LATENCY_BE,
3864        /* LTR latency for BK, in us */
3865        WMI_PDEV_PARAM_LTR_AC_LATENCY_BK,
3866        /* LTR latency for VI, in us */
3867        WMI_PDEV_PARAM_LTR_AC_LATENCY_VI,
3868        /* LTR latency for VO, in us  */
3869        WMI_PDEV_PARAM_LTR_AC_LATENCY_VO,
3870        /* LTR AC latency timeout, in ms */
3871        WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3872        /* LTR platform latency override, in us */
3873        WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3874        /* LTR-RX override, in us */
3875        WMI_PDEV_PARAM_LTR_RX_OVERRIDE,
3876        /* Tx activity timeout for LTR, in us */
3877        WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3878        /* L1SS state machine enable */
3879        WMI_PDEV_PARAM_L1SS_ENABLE,
3880        /* Deep sleep state machine enable */
3881        WMI_PDEV_PARAM_DSLEEP_ENABLE,
3882        /* RX buffering flush enable */
3883        WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
3884        /* RX buffering matermark */
3885        WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
3886        /* RX buffering timeout enable */
3887        WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
3888        /* RX buffering timeout value */
3889        WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
3890        /* pdev level stats update period in ms */
3891        WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3892        /* vdev level stats update period in ms */
3893        WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3894        /* peer level stats update period in ms */
3895        WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3896        /* beacon filter status update period */
3897        WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3898        /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
3899        WMI_PDEV_PARAM_PMF_QOS,
3900        /* Access category on which ARP frames are sent */
3901        WMI_PDEV_PARAM_ARP_AC_OVERRIDE,
3902        /* DCS configuration */
3903        WMI_PDEV_PARAM_DCS,
3904        /* Enable/Disable ANI on target */
3905        WMI_PDEV_PARAM_ANI_ENABLE,
3906        /* configure the ANI polling period */
3907        WMI_PDEV_PARAM_ANI_POLL_PERIOD,
3908        /* configure the ANI listening period */
3909        WMI_PDEV_PARAM_ANI_LISTEN_PERIOD,
3910        /* configure OFDM immunity level */
3911        WMI_PDEV_PARAM_ANI_OFDM_LEVEL,
3912        /* configure CCK immunity level */
3913        WMI_PDEV_PARAM_ANI_CCK_LEVEL,
3914        /* Enable/Disable CDD for 1x1 STAs in rate control module */
3915        WMI_PDEV_PARAM_DYNTXCHAIN,
3916        /* Enable/Disable proxy STA */
3917        WMI_PDEV_PARAM_PROXY_STA,
3918        /* Enable/Disable low power state when all VDEVs are inactive/idle. */
3919        WMI_PDEV_PARAM_IDLE_PS_CONFIG,
3920        /* Enable/Disable power gating sleep */
3921        WMI_PDEV_PARAM_POWER_GATING_SLEEP,
3922};
3923
3924enum wmi_10x_pdev_param {
3925        /* TX chian mask */
3926        WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3927        /* RX chian mask */
3928        WMI_10X_PDEV_PARAM_RX_CHAIN_MASK,
3929        /* TX power limit for 2G Radio */
3930        WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G,
3931        /* TX power limit for 5G Radio */
3932        WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G,
3933        /* TX power scale */
3934        WMI_10X_PDEV_PARAM_TXPOWER_SCALE,
3935        /* Beacon generation mode . 0: host, 1: target   */
3936        WMI_10X_PDEV_PARAM_BEACON_GEN_MODE,
3937        /* Beacon generation mode . 0: staggered 1: bursted   */
3938        WMI_10X_PDEV_PARAM_BEACON_TX_MODE,
3939        /*
3940         * Resource manager off chan mode .
3941         * 0: turn off offchan mode. 1: turn on offchan mode
3942         */
3943        WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3944        /*
3945         * Protection mode:
3946         * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3947         */
3948        WMI_10X_PDEV_PARAM_PROTECTION_MODE,
3949        /* Dynamic bandwidth 0: disable 1: enable */
3950        WMI_10X_PDEV_PARAM_DYNAMIC_BW,
3951        /* Non aggregrate/ 11g sw retry threshold.0-disable */
3952        WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3953        /* aggregrate sw retry threshold. 0-disable*/
3954        WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH,
3955        /* Station kickout threshold (non of consecutive failures).0-disable */
3956        WMI_10X_PDEV_PARAM_STA_KICKOUT_TH,
3957        /* Aggerate size scaling configuration per AC */
3958        WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3959        /* LTR enable */
3960        WMI_10X_PDEV_PARAM_LTR_ENABLE,
3961        /* LTR latency for BE, in us */
3962        WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE,
3963        /* LTR latency for BK, in us */
3964        WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK,
3965        /* LTR latency for VI, in us */
3966        WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI,
3967        /* LTR latency for VO, in us  */
3968        WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO,
3969        /* LTR AC latency timeout, in ms */
3970        WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3971        /* LTR platform latency override, in us */
3972        WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3973        /* LTR-RX override, in us */
3974        WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE,
3975        /* Tx activity timeout for LTR, in us */
3976        WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3977        /* L1SS state machine enable */
3978        WMI_10X_PDEV_PARAM_L1SS_ENABLE,
3979        /* Deep sleep state machine enable */
3980        WMI_10X_PDEV_PARAM_DSLEEP_ENABLE,
3981        /* pdev level stats update period in ms */
3982        WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3983        /* vdev level stats update period in ms */
3984        WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3985        /* peer level stats update period in ms */
3986        WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3987        /* beacon filter status update period */
3988        WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3989        /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
3990        WMI_10X_PDEV_PARAM_PMF_QOS,
3991        /* Access category on which ARP and DHCP frames are sent */
3992        WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE,
3993        /* DCS configuration */
3994        WMI_10X_PDEV_PARAM_DCS,
3995        /* Enable/Disable ANI on target */
3996        WMI_10X_PDEV_PARAM_ANI_ENABLE,
3997        /* configure the ANI polling period */
3998        WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD,
3999        /* configure the ANI listening period */
4000        WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD,
4001        /* configure OFDM immunity level */
4002        WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL,
4003        /* configure CCK immunity level */
4004        WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL,
4005        /* Enable/Disable CDD for 1x1 STAs in rate control module */
4006        WMI_10X_PDEV_PARAM_DYNTXCHAIN,
4007        /* Enable/Disable Fast channel reset*/
4008        WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET,
4009        /* Set Bursting DUR */
4010        WMI_10X_PDEV_PARAM_BURST_DUR,
4011        /* Set Bursting Enable*/
4012        WMI_10X_PDEV_PARAM_BURST_ENABLE,
4013
4014        /* following are available as of firmware 10.2 */
4015        WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
4016        WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE,
4017        WMI_10X_PDEV_PARAM_IGMPMLD_TID,
4018        WMI_10X_PDEV_PARAM_ANTENNA_GAIN,
4019        WMI_10X_PDEV_PARAM_RX_DECAP_MODE,
4020        WMI_10X_PDEV_PARAM_RX_FILTER,
4021        WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID,
4022        WMI_10X_PDEV_PARAM_PROXY_STA_MODE,
4023        WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE,
4024        WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
4025        WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
4026        WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE,
4027        WMI_10X_PDEV_PARAM_RTS_FIXED_RATE,
4028        WMI_10X_PDEV_PARAM_CAL_PERIOD,
4029        WMI_10X_PDEV_PARAM_ATF_STRICT_SCH,
4030        WMI_10X_PDEV_PARAM_ATF_SCHED_DURATION,
4031        WMI_10X_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
4032        WMI_10X_PDEV_PARAM_PDEV_RESET
4033};
4034
4035enum wmi_10_4_pdev_param {
4036        WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
4037        WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK,
4038        WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G,
4039        WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G,
4040        WMI_10_4_PDEV_PARAM_TXPOWER_SCALE,
4041        WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE,
4042        WMI_10_4_PDEV_PARAM_BEACON_TX_MODE,
4043        WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
4044        WMI_10_4_PDEV_PARAM_PROTECTION_MODE,
4045        WMI_10_4_PDEV_PARAM_DYNAMIC_BW,
4046        WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
4047        WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH,
4048        WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH,
4049        WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING,
4050        WMI_10_4_PDEV_PARAM_LTR_ENABLE,
4051        WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE,
4052        WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK,
4053        WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI,
4054        WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO,
4055        WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
4056        WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
4057        WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE,
4058        WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
4059        WMI_10_4_PDEV_PARAM_L1SS_ENABLE,
4060        WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE,
4061        WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
4062        WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
4063        WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
4064        WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
4065        WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
4066        WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
4067        WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
4068        WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
4069        WMI_10_4_PDEV_PARAM_PMF_QOS,
4070        WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE,
4071        WMI_10_4_PDEV_PARAM_DCS,
4072        WMI_10_4_PDEV_PARAM_ANI_ENABLE,
4073        WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD,
4074        WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD,
4075        WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL,
4076        WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL,
4077        WMI_10_4_PDEV_PARAM_DYNTXCHAIN,
4078        WMI_10_4_PDEV_PARAM_PROXY_STA,
4079        WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG,
4080        WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP,
4081        WMI_10_4_PDEV_PARAM_AGGR_BURST,
4082        WMI_10_4_PDEV_PARAM_RX_DECAP_MODE,
4083        WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET,
4084        WMI_10_4_PDEV_PARAM_BURST_DUR,
4085        WMI_10_4_PDEV_PARAM_BURST_ENABLE,
4086        WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
4087        WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE,
4088        WMI_10_4_PDEV_PARAM_IGMPMLD_TID,
4089        WMI_10_4_PDEV_PARAM_ANTENNA_GAIN,
4090        WMI_10_4_PDEV_PARAM_RX_FILTER,
4091        WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID,
4092        WMI_10_4_PDEV_PARAM_PROXY_STA_MODE,
4093        WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE,
4094        WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
4095        WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
4096        WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE,
4097        WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE,
4098        WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS,
4099        WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID,
4100        WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID,
4101        WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID,
4102        WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID,
4103        WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
4104        WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID,
4105        WMI_10_4_PDEV_PARAM_EN_STATS,
4106        WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY,
4107        WMI_10_4_PDEV_PARAM_NOISE_DETECTION,
4108        WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD,
4109        WMI_10_4_PDEV_PARAM_DPD_ENABLE,
4110        WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO,
4111        WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH,
4112        WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION,
4113        WMI_10_4_PDEV_PARAM_ANT_PLZN,
4114        WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT,
4115        WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL,
4116        WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G,
4117        WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G,
4118        WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU,
4119        WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU,
4120        WMI_10_4_PDEV_PARAM_CCA_THRESHOLD,
4121        WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE,
4122        WMI_10_4_PDEV_PARAM_CAL_PERIOD,
4123        WMI_10_4_PDEV_PARAM_PDEV_RESET,
4124        WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET,
4125        WMI_10_4_PDEV_PARAM_ARP_SRCADDR,
4126        WMI_10_4_PDEV_PARAM_ARP_DSTADDR,
4127        WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB,
4128        WMI_10_4_PDEV_PARAM_RX_BATCHMODE,
4129        WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY,
4130        WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH,
4131        WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR,
4132        WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE,
4133        WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE,
4134        WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY,
4135        WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX,
4136};
4137
4138struct wmi_pdev_set_param_cmd {
4139        __le32 param_id;
4140        __le32 param_value;
4141} __packed;
4142
4143struct wmi_pdev_set_base_macaddr_cmd {
4144        struct wmi_mac_addr mac_addr;
4145} __packed;
4146
4147/* valid period is 1 ~ 60000ms, unit in millisecond */
4148#define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000
4149
4150struct wmi_pdev_get_tpc_config_cmd {
4151        /* parameter   */
4152        __le32 param;
4153} __packed;
4154
4155#define WMI_TPC_CONFIG_PARAM            1
4156#define WMI_TPC_FINAL_RATE_MAX          240
4157#define WMI_TPC_TX_N_CHAIN              4
4158#define WMI_TPC_RATE_MAX               (WMI_TPC_TX_N_CHAIN * 65)
4159#define WMI_TPC_PREAM_TABLE_MAX         10
4160#define WMI_TPC_FLAG                    3
4161#define WMI_TPC_BUF_SIZE                10
4162#define WMI_TPC_BEAMFORMING             2
4163
4164enum wmi_tpc_table_type {
4165        WMI_TPC_TABLE_TYPE_CDD = 0,
4166        WMI_TPC_TABLE_TYPE_STBC = 1,
4167        WMI_TPC_TABLE_TYPE_TXBF = 2,
4168};
4169
4170enum wmi_tpc_config_event_flag {
4171        WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD     = 0x1,
4172        WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC    = 0x2,
4173        WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF    = 0x4,
4174};
4175
4176struct wmi_pdev_tpc_config_event {
4177        __le32 reg_domain;
4178        __le32 chan_freq;
4179        __le32 phy_mode;
4180        __le32 twice_antenna_reduction;
4181        __le32 twice_max_rd_power;
4182        a_sle32 twice_antenna_gain;
4183        __le32 power_limit;
4184        __le32 rate_max;
4185        __le32 num_tx_chain;
4186        __le32 ctl;
4187        __le32 flags;
4188        s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
4189        s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4190        s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4191        s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4192        u8 rates_array[WMI_TPC_RATE_MAX];
4193} __packed;
4194
4195/* Transmit power scale factor. */
4196enum wmi_tp_scale {
4197        WMI_TP_SCALE_MAX    = 0,        /* no scaling (default) */
4198        WMI_TP_SCALE_50     = 1,        /* 50% of max (-3 dBm) */
4199        WMI_TP_SCALE_25     = 2,        /* 25% of max (-6 dBm) */
4200        WMI_TP_SCALE_12     = 3,        /* 12% of max (-9 dBm) */
4201        WMI_TP_SCALE_MIN    = 4,        /* min, but still on   */
4202        WMI_TP_SCALE_SIZE   = 5,        /* max num of enum     */
4203};
4204
4205struct wmi_pdev_tpc_final_table_event {
4206        __le32 reg_domain;
4207        __le32 chan_freq;
4208        __le32 phy_mode;
4209        __le32 twice_antenna_reduction;
4210        __le32 twice_max_rd_power;
4211        a_sle32 twice_antenna_gain;
4212        __le32 power_limit;
4213        __le32 rate_max;
4214        __le32 num_tx_chain;
4215        __le32 ctl;
4216        __le32 flags;
4217        s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
4218        s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4219        s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4220        s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4221        u8 rates_array[WMI_TPC_FINAL_RATE_MAX];
4222        u8 ctl_power_table[WMI_TPC_BEAMFORMING][WMI_TPC_TX_N_CHAIN]
4223           [WMI_TPC_TX_N_CHAIN];
4224} __packed;
4225
4226struct wmi_pdev_get_tpc_table_cmd {
4227        __le32 param;
4228} __packed;
4229
4230enum wmi_tpc_pream_2ghz {
4231        WMI_TPC_PREAM_2GHZ_CCK = 0,
4232        WMI_TPC_PREAM_2GHZ_OFDM,
4233        WMI_TPC_PREAM_2GHZ_HT20,
4234        WMI_TPC_PREAM_2GHZ_HT40,
4235        WMI_TPC_PREAM_2GHZ_VHT20,
4236        WMI_TPC_PREAM_2GHZ_VHT40,
4237        WMI_TPC_PREAM_2GHZ_VHT80,
4238};
4239
4240enum wmi_tpc_pream_5ghz {
4241        WMI_TPC_PREAM_5GHZ_OFDM = 1,
4242        WMI_TPC_PREAM_5GHZ_HT20,
4243        WMI_TPC_PREAM_5GHZ_HT40,
4244        WMI_TPC_PREAM_5GHZ_VHT20,
4245        WMI_TPC_PREAM_5GHZ_VHT40,
4246        WMI_TPC_PREAM_5GHZ_VHT80,
4247        WMI_TPC_PREAM_5GHZ_HTCUP,
4248};
4249
4250#define WMI_PEER_PS_STATE_DISABLED      2
4251
4252struct wmi_peer_sta_ps_state_chg_event {
4253        struct wmi_mac_addr peer_macaddr;
4254        __le32 peer_ps_state;
4255} __packed;
4256
4257struct wmi_pdev_chanlist_update_event {
4258        /* number of channels */
4259        __le32 num_chan;
4260        /* array of channels */
4261        struct wmi_channel channel_list[1];
4262} __packed;
4263
4264#define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32)
4265
4266struct wmi_debug_mesg_event {
4267        /* message buffer, NULL terminated */
4268        char bufp[WMI_MAX_DEBUG_MESG];
4269} __packed;
4270
4271enum {
4272        /* P2P device */
4273        VDEV_SUBTYPE_P2PDEV = 0,
4274        /* P2P client */
4275        VDEV_SUBTYPE_P2PCLI,
4276        /* P2P GO */
4277        VDEV_SUBTYPE_P2PGO,
4278        /* BT3.0 HS */
4279        VDEV_SUBTYPE_BT,
4280};
4281
4282struct wmi_pdev_set_channel_cmd {
4283        /* idnore power , only use flags , mode and freq */
4284        struct wmi_channel chan;
4285} __packed;
4286
4287struct wmi_pdev_pktlog_enable_cmd {
4288        __le32 ev_bitmap;
4289} __packed;
4290
4291/* Customize the DSCP (bit) to TID (0-7) mapping for QOS */
4292#define WMI_DSCP_MAP_MAX    (64)
4293struct wmi_pdev_set_dscp_tid_map_cmd {
4294        /* map indicating DSCP to TID conversion */
4295        __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX];
4296} __packed;
4297
4298enum mcast_bcast_rate_id {
4299        WMI_SET_MCAST_RATE,
4300        WMI_SET_BCAST_RATE
4301};
4302
4303struct mcast_bcast_rate {
4304        enum mcast_bcast_rate_id rate_id;
4305        __le32 rate;
4306} __packed;
4307
4308struct wmi_wmm_params {
4309        __le32 cwmin;
4310        __le32 cwmax;
4311        __le32 aifs;
4312        __le32 txop;
4313        __le32 acm;
4314        __le32 no_ack;
4315} __packed;
4316
4317struct wmi_pdev_set_wmm_params {
4318        struct wmi_wmm_params ac_be;
4319        struct wmi_wmm_params ac_bk;
4320        struct wmi_wmm_params ac_vi;
4321        struct wmi_wmm_params ac_vo;
4322} __packed;
4323
4324struct wmi_wmm_params_arg {
4325        u32 cwmin;
4326        u32 cwmax;
4327        u32 aifs;
4328        u32 txop;
4329        u32 acm;
4330        u32 no_ack;
4331};
4332
4333struct wmi_wmm_params_all_arg {
4334        struct wmi_wmm_params_arg ac_be;
4335        struct wmi_wmm_params_arg ac_bk;
4336        struct wmi_wmm_params_arg ac_vi;
4337        struct wmi_wmm_params_arg ac_vo;
4338};
4339
4340struct wmi_pdev_stats_tx {
4341        /* Num HTT cookies queued to dispatch list */
4342        __le32 comp_queued;
4343
4344        /* Num HTT cookies dispatched */
4345        __le32 comp_delivered;
4346
4347        /* Num MSDU queued to WAL */
4348        __le32 msdu_enqued;
4349
4350        /* Num MPDU queue to WAL */
4351        __le32 mpdu_enqued;
4352
4353        /* Num MSDUs dropped by WMM limit */
4354        __le32 wmm_drop;
4355
4356        /* Num Local frames queued */
4357        __le32 local_enqued;
4358
4359        /* Num Local frames done */
4360        __le32 local_freed;
4361
4362        /* Num queued to HW */
4363        __le32 hw_queued;
4364
4365        /* Num PPDU reaped from HW */
4366        __le32 hw_reaped;
4367
4368        /* Num underruns */
4369        __le32 underrun;
4370
4371        /* Num PPDUs cleaned up in TX abort */
4372        __le32 tx_abort;
4373
4374        /* Num MPDUs requeued by SW */
4375        __le32 mpdus_requeued;
4376
4377        /* excessive retries */
4378        __le32 tx_ko;
4379
4380        /* data hw rate code */
4381        __le32 data_rc;
4382
4383        /* Scheduler self triggers */
4384        __le32 self_triggers;
4385
4386        /* frames dropped due to excessive sw retries */
4387        __le32 sw_retry_failure;
4388