linux/drivers/media/pci/bt8xx/bttv-cards.c
<<
>>
Prefs
   1// SPDX-License-Identifier: GPL-2.0-or-later
   2/*
   3
   4    bttv-cards.c
   5
   6    this file has configuration information - card-specific stuff
   7    like the big tvcards array for the most part
   8
   9    Copyright (C) 1996,97,98 Ralph  Metzler (rjkm@thp.uni-koeln.de)
  10                           & Marcus Metzler (mocm@thp.uni-koeln.de)
  11    (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
  12
  13
  14*/
  15
  16#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  17
  18#include <linux/delay.h>
  19#include <linux/module.h>
  20#include <linux/kmod.h>
  21#include <linux/init.h>
  22#include <linux/pci.h>
  23#include <linux/vmalloc.h>
  24#include <linux/firmware.h>
  25#include <net/checksum.h>
  26
  27#include <asm/unaligned.h>
  28#include <asm/io.h>
  29
  30#include "bttvp.h"
  31#include <media/v4l2-common.h>
  32#include <media/i2c/tvaudio.h>
  33#include "bttv-audio-hook.h"
  34
  35/* fwd decl */
  36static void boot_msp34xx(struct bttv *btv, int pin);
  37static void hauppauge_eeprom(struct bttv *btv);
  38static void avermedia_eeprom(struct bttv *btv);
  39static void osprey_eeprom(struct bttv *btv, const u8 ee[256]);
  40static void modtec_eeprom(struct bttv *btv);
  41static void init_PXC200(struct bttv *btv);
  42static void init_RTV24(struct bttv *btv);
  43static void init_PCI8604PW(struct bttv *btv);
  44
  45static void rv605_muxsel(struct bttv *btv, unsigned int input);
  46static void eagle_muxsel(struct bttv *btv, unsigned int input);
  47static void xguard_muxsel(struct bttv *btv, unsigned int input);
  48static void ivc120_muxsel(struct bttv *btv, unsigned int input);
  49static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
  50
  51static void PXC200_muxsel(struct bttv *btv, unsigned int input);
  52
  53static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
  54static void picolo_tetra_init(struct bttv *btv);
  55
  56static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
  57static void tibetCS16_init(struct bttv *btv);
  58
  59static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
  60static void kodicom4400r_init(struct bttv *btv);
  61
  62static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
  63static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
  64
  65static void geovision_muxsel(struct bttv *btv, unsigned int input);
  66
  67static void phytec_muxsel(struct bttv *btv, unsigned int input);
  68
  69static void gv800s_muxsel(struct bttv *btv, unsigned int input);
  70static void gv800s_init(struct bttv *btv);
  71
  72static void td3116_muxsel(struct bttv *btv, unsigned int input);
  73
  74static int terratec_active_radio_upgrade(struct bttv *btv);
  75static int tea575x_init(struct bttv *btv);
  76static void identify_by_eeprom(struct bttv *btv,
  77                               unsigned char eeprom_data[256]);
  78static int pvr_boot(struct bttv *btv);
  79
  80/* config variables */
  81static unsigned int triton1;
  82static unsigned int vsfx;
  83static unsigned int latency = UNSET;
  84int no_overlay=-1;
  85
  86static unsigned int card[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  87static unsigned int pll[BTTV_MAX]    = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  88static unsigned int tuner[BTTV_MAX]  = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  89static unsigned int svhs[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  90static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
  91static unsigned int audiodev[BTTV_MAX];
  92static unsigned int saa6588[BTTV_MAX];
  93static struct bttv  *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
  94static unsigned int autoload = UNSET;
  95static unsigned int gpiomask = UNSET;
  96static unsigned int audioall = UNSET;
  97static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
  98
  99/* insmod options */
 100module_param(triton1,    int, 0444);
 101module_param(vsfx,       int, 0444);
 102module_param(no_overlay, int, 0444);
 103module_param(latency,    int, 0444);
 104module_param(gpiomask,   int, 0444);
 105module_param(audioall,   int, 0444);
 106module_param(autoload,   int, 0444);
 107
 108module_param_array(card,     int, NULL, 0444);
 109module_param_array(pll,      int, NULL, 0444);
 110module_param_array(tuner,    int, NULL, 0444);
 111module_param_array(svhs,     int, NULL, 0444);
 112module_param_array(remote,   int, NULL, 0444);
 113module_param_array(audiodev, int, NULL, 0444);
 114module_param_array(audiomux, int, NULL, 0444);
 115
 116MODULE_PARM_DESC(triton1, "set ETBF pci config bit [enable bug compatibility for triton1 + others]");
 117MODULE_PARM_DESC(vsfx, "set VSFX pci config bit [yet another chipset flaw workaround]");
 118MODULE_PARM_DESC(latency,"pci latency timer");
 119MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
 120MODULE_PARM_DESC(pll, "specify installed crystal (0=none, 28=28 MHz, 35=35 MHz, 14=14 MHz)");
 121MODULE_PARM_DESC(tuner,"specify installed tuner type");
 122MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore");
 123MODULE_PARM_DESC(audiodev, "specify audio device:\n"
 124                "\t\t-1 = no audio\n"
 125                "\t\t 0 = autodetect (default)\n"
 126                "\t\t 1 = msp3400\n"
 127                "\t\t 2 = tda7432\n"
 128                "\t\t 3 = tvaudio");
 129MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition.");
 130MODULE_PARM_DESC(no_overlay, "allow override overlay default (0 disables, 1 enables) [some VIA/SIS chipsets are known to have problem with overlay]");
 131
 132
 133/* I2C addresses list */
 134#define I2C_ADDR_TDA7432        0x8a
 135#define I2C_ADDR_MSP3400        0x80
 136#define I2C_ADDR_MSP3400_ALT    0x88
 137
 138
 139/* ----------------------------------------------------------------------- */
 140/* list of card IDs for bt878+ cards                                       */
 141
 142static struct CARD {
 143        unsigned id;
 144        int cardnr;
 145        char *name;
 146} cards[] = {
 147        { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV" },
 148        { 0x39000070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV-D" },
 149        { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR,  "Hauppauge WinTV/PVR" },
 150        { 0xff000070, BTTV_BOARD_OSPREY1x0,     "Osprey-100" },
 151        { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
 152        { 0xff020070, BTTV_BOARD_OSPREY500,     "Osprey-500" },
 153        { 0xff030070, BTTV_BOARD_OSPREY2000,    "Osprey-2000" },
 154        { 0xff040070, BTTV_BOARD_OSPREY540,     "Osprey-540" },
 155        { 0xff070070, BTTV_BOARD_OSPREY440,     "Osprey-440" },
 156
 157        { 0x00011002, BTTV_BOARD_ATI_TVWONDER,  "ATI TV Wonder" },
 158        { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
 159
 160        { 0x6606107d, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 161        { 0x6607107d, BTTV_BOARD_WINFASTVC100,  "Leadtek WinFast VC 100" },
 162        { 0x6609107d, BTTV_BOARD_WINFAST2000,   "Leadtek TV 2000 XP" },
 163        { 0x263610b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 164        { 0x264510b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
 165        { 0x402010fc, BTTV_BOARD_GVBCTV3PCI,    "I-O Data Co. GV-BCTV3/PCI" },
 166        { 0x405010fc, BTTV_BOARD_GVBCTV4PCI,    "I-O Data Co. GV-BCTV4/PCI" },
 167        { 0x407010fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 168        { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
 169
 170        { 0x001211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
 171        /* some cards ship with byteswapped IDs ... */
 172        { 0x1200bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
 173        { 0xff00bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
 174        /* this seems to happen as well ... */
 175        { 0xff1211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
 176
 177        { 0x3000121a, BTTV_BOARD_VOODOOTV_200,  "3Dfx VoodooTV 200" },
 178        { 0x263710b4, BTTV_BOARD_VOODOOTV_FM,   "3Dfx VoodooTV FM" },
 179        { 0x3060121a, BTTV_BOARD_STB2,    "3Dfx VoodooTV 100/ STB OEM" },
 180
 181        { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
 182        { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
 183        { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
 184        { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
 185        { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
 186        { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
 187        { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS,  "Phoebe TV Master (CPH060)" },
 188
 189        { 0x00011461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
 190        { 0x00021461, BTTV_BOARD_AVERMEDIA98,   "AVermedia TVCapture 98" },
 191        { 0x00031461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
 192        { 0x00041461, BTTV_BOARD_AVERMEDIA98,   "AVerMedia TVCapture 98" },
 193        { 0x03001461, BTTV_BOARD_AVERMEDIA98,   "VDOMATE TV TUNER CARD" },
 194
 195        { 0x1117153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL B/G)" },
 196        { 0x1118153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL B/G)" },
 197        { 0x1119153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL I)" },
 198        { 0x111a153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL I)" },
 199
 200        { 0x1123153b, BTTV_BOARD_TERRATVRADIO,  "Terratec TV Radio+" },
 201        { 0x1127153b, BTTV_BOARD_TERRATV,       "Terratec TV+ (V1.05)"    },
 202        /* clashes with FlyVideo
 203         *{ 0x18521852, BTTV_BOARD_TERRATV,     "Terratec TV+ (V1.10)"    }, */
 204        { 0x1134153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (LR102)" },
 205        { 0x1135153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* LR102 */
 206        { 0x5018153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue" },       /* ?? */
 207        { 0xff3b153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* ?? */
 208
 209        { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 210        { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
 211        { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 212        { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 213        { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
 214
 215        { 0x1430aa00, BTTV_BOARD_PV143,         "Provideo PV143A" },
 216        { 0x1431aa00, BTTV_BOARD_PV143,         "Provideo PV143B" },
 217        { 0x1432aa00, BTTV_BOARD_PV143,         "Provideo PV143C" },
 218        { 0x1433aa00, BTTV_BOARD_PV143,         "Provideo PV143D" },
 219        { 0x1433aa03, BTTV_BOARD_PV143,         "Security Eyes" },
 220
 221        { 0x1460aa00, BTTV_BOARD_PV150,         "Provideo PV150A-1" },
 222        { 0x1461aa01, BTTV_BOARD_PV150,         "Provideo PV150A-2" },
 223        { 0x1462aa02, BTTV_BOARD_PV150,         "Provideo PV150A-3" },
 224        { 0x1463aa03, BTTV_BOARD_PV150,         "Provideo PV150A-4" },
 225
 226        { 0x1464aa04, BTTV_BOARD_PV150,         "Provideo PV150B-1" },
 227        { 0x1465aa05, BTTV_BOARD_PV150,         "Provideo PV150B-2" },
 228        { 0x1466aa06, BTTV_BOARD_PV150,         "Provideo PV150B-3" },
 229        { 0x1467aa07, BTTV_BOARD_PV150,         "Provideo PV150B-4" },
 230
 231        { 0xa132ff00, BTTV_BOARD_IVC100,        "IVC-100"  },
 232        { 0xa1550000, BTTV_BOARD_IVC200,        "IVC-200"  },
 233        { 0xa1550001, BTTV_BOARD_IVC200,        "IVC-200"  },
 234        { 0xa1550002, BTTV_BOARD_IVC200,        "IVC-200"  },
 235        { 0xa1550003, BTTV_BOARD_IVC200,        "IVC-200"  },
 236        { 0xa1550100, BTTV_BOARD_IVC200,        "IVC-200G" },
 237        { 0xa1550101, BTTV_BOARD_IVC200,        "IVC-200G" },
 238        { 0xa1550102, BTTV_BOARD_IVC200,        "IVC-200G" },
 239        { 0xa1550103, BTTV_BOARD_IVC200,        "IVC-200G" },
 240        { 0xa1550800, BTTV_BOARD_IVC200,        "IVC-200"  },
 241        { 0xa1550801, BTTV_BOARD_IVC200,        "IVC-200"  },
 242        { 0xa1550802, BTTV_BOARD_IVC200,        "IVC-200"  },
 243        { 0xa1550803, BTTV_BOARD_IVC200,        "IVC-200"  },
 244        { 0xa182ff00, BTTV_BOARD_IVC120,        "IVC-120G" },
 245        { 0xa182ff01, BTTV_BOARD_IVC120,        "IVC-120G" },
 246        { 0xa182ff02, BTTV_BOARD_IVC120,        "IVC-120G" },
 247        { 0xa182ff03, BTTV_BOARD_IVC120,        "IVC-120G" },
 248        { 0xa182ff04, BTTV_BOARD_IVC120,        "IVC-120G" },
 249        { 0xa182ff05, BTTV_BOARD_IVC120,        "IVC-120G" },
 250        { 0xa182ff06, BTTV_BOARD_IVC120,        "IVC-120G" },
 251        { 0xa182ff07, BTTV_BOARD_IVC120,        "IVC-120G" },
 252        { 0xa182ff08, BTTV_BOARD_IVC120,        "IVC-120G" },
 253        { 0xa182ff09, BTTV_BOARD_IVC120,        "IVC-120G" },
 254        { 0xa182ff0a, BTTV_BOARD_IVC120,        "IVC-120G" },
 255        { 0xa182ff0b, BTTV_BOARD_IVC120,        "IVC-120G" },
 256        { 0xa182ff0c, BTTV_BOARD_IVC120,        "IVC-120G" },
 257        { 0xa182ff0d, BTTV_BOARD_IVC120,        "IVC-120G" },
 258        { 0xa182ff0e, BTTV_BOARD_IVC120,        "IVC-120G" },
 259        { 0xa182ff0f, BTTV_BOARD_IVC120,        "IVC-120G" },
 260        { 0xf0500000, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 261        { 0xf0500001, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 262        { 0xf0500002, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 263        { 0xf0500003, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
 264
 265        { 0x41424344, BTTV_BOARD_GRANDTEC,      "GrandTec Multi Capture" },
 266        { 0x01020304, BTTV_BOARD_XGUARD,        "Grandtec Grand X-Guard" },
 267
 268        { 0x18501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 269        { 0xa0501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
 270        { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ,  "FlyVideo 98EZ (LR51)/ CyberMail AV" },
 271        { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
 272        { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
 273        { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98,   "Lifeview Flyvideo 98" },
 274
 275        { 0x010115cb, BTTV_BOARD_GMV1,          "AG GMV1" },
 276        { 0x010114c7, BTTV_BOARD_MODTEC_205,    "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
 277
 278        { 0x10b42636, BTTV_BOARD_HAUPPAUGE878,  "STB ???" },
 279        { 0x217d6606, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 280        { 0xfff6f6ff, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
 281        { 0x03116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 311" },
 282        { 0x06116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 611" },
 283        { 0x00790e11, BTTV_BOARD_WINDVR,        "Canopus WinDVR PCI" },
 284        { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX,       "Face to Face Tvmax" },
 285        { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
 286        { 0x146caa0c, BTTV_BOARD_PV951,         "ituner spectra8" },
 287        { 0x200a1295, BTTV_BOARD_PXC200,        "ImageNation PXC200A" },
 288
 289        { 0x40111554, BTTV_BOARD_PV_BT878P_9B,  "Prolink Pixelview PV-BT" },
 290        { 0x17de0a01, BTTV_BOARD_KWORLD,        "Mecer TV/FM/Video Tuner" },
 291
 292        { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
 293        { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
 294        { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
 295        { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
 296
 297        { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
 298
 299        { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
 300        { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
 301
 302        /* likely broken, vendor id doesn't match the other magic views ...
 303         * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
 304
 305        /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
 306        * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB,  "Hauppauge ImpactVCB" }, */
 307
 308        { 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2,  "Conceptronic CTVFMi v2"},
 309
 310        /* DVB cards (using pci function .1 for mpeg data xfer) */
 311        { 0x001c11bd, BTTV_BOARD_PINNACLESAT,   "Pinnacle PCTV Sat" },
 312        { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
 313        { 0x20007063, BTTV_BOARD_PC_HDTV,       "pcHDTV HD-2000 TV"},
 314        { 0x002611bd, BTTV_BOARD_TWINHAN_DST,   "Pinnacle PCTV SAT CI" },
 315        { 0x00011822, BTTV_BOARD_TWINHAN_DST,   "Twinhan VisionPlus DVB" },
 316        { 0xfc00270f, BTTV_BOARD_TWINHAN_DST,   "ChainTech digitop DST-1000 DVB-S" },
 317        { 0x07711461, BTTV_BOARD_AVDVBT_771,    "AVermedia AverTV DVB-T 771" },
 318        { 0x07611461, BTTV_BOARD_AVDVBT_761,    "AverMedia AverTV DVB-T 761" },
 319        { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE,    "DViCO FusionHDTV DVB-T Lite" },
 320        { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE,    "Ultraview DVB-T Lite" },
 321        { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE,    "DViCO FusionHDTV 5 Lite" },
 322        { 0x00261822, BTTV_BOARD_TWINHAN_DST,   "DNTV Live! Mini "},
 323        { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2,    "DViCO FusionHDTV 2" },
 324        { 0x763c008a, BTTV_BOARD_GEOVISION_GV600,       "GeoVision GV-600" },
 325        { 0x18011000, BTTV_BOARD_ENLTV_FM_2,    "Encore ENL TV-FM-2" },
 326        { 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" },
 327        { 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
 328        { 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
 329        { 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL,   "GeoVision GV-800(S) (slave)" },
 330
 331        { 0x15401830, BTTV_BOARD_PV183,         "Provideo PV183-1" },
 332        { 0x15401831, BTTV_BOARD_PV183,         "Provideo PV183-2" },
 333        { 0x15401832, BTTV_BOARD_PV183,         "Provideo PV183-3" },
 334        { 0x15401833, BTTV_BOARD_PV183,         "Provideo PV183-4" },
 335        { 0x15401834, BTTV_BOARD_PV183,         "Provideo PV183-5" },
 336        { 0x15401835, BTTV_BOARD_PV183,         "Provideo PV183-6" },
 337        { 0x15401836, BTTV_BOARD_PV183,         "Provideo PV183-7" },
 338        { 0x15401837, BTTV_BOARD_PV183,         "Provideo PV183-8" },
 339        { 0x3116f200, BTTV_BOARD_TVT_TD3116,    "Tongwei Video Technology TD-3116" },
 340        { 0x02280279, BTTV_BOARD_APOSONIC_WDVR, "Aposonic W-DVR" },
 341        { 0, -1, NULL }
 342};
 343
 344/* ----------------------------------------------------------------------- */
 345/* array with description for bt848 / bt878 tv/grabber cards               */
 346
 347struct tvcard bttv_tvcards[] = {
 348        /* ---- card 0x00 ---------------------------------- */
 349        [BTTV_BOARD_UNKNOWN] = {
 350                .name           = " *** UNKNOWN/GENERIC *** ",
 351                .video_inputs   = 4,
 352                .svhs           = 2,
 353                .muxsel         = MUXSEL(2, 3, 1, 0),
 354                .tuner_type     = UNSET,
 355                .tuner_addr     = ADDR_UNSET,
 356        },
 357        [BTTV_BOARD_MIRO] = {
 358                .name           = "MIRO PCTV",
 359                .video_inputs   = 4,
 360                /* .audio_inputs= 1, */
 361                .svhs           = 2,
 362                .gpiomask       = 15,
 363                .muxsel         = MUXSEL(2, 3, 1, 1),
 364                .gpiomux        = { 2, 0, 0, 0 },
 365                .gpiomute       = 10,
 366                .tuner_type     = UNSET,
 367                .tuner_addr     = ADDR_UNSET,
 368        },
 369        [BTTV_BOARD_HAUPPAUGE] = {
 370                .name           = "Hauppauge (bt848)",
 371                .video_inputs   = 4,
 372                /* .audio_inputs= 1, */
 373                .svhs           = 2,
 374                .gpiomask       = 7,
 375                .muxsel         = MUXSEL(2, 3, 1, 1),
 376                .gpiomux        = { 0, 1, 2, 3 },
 377                .gpiomute       = 4,
 378                .tuner_type     = UNSET,
 379                .tuner_addr     = ADDR_UNSET,
 380        },
 381        [BTTV_BOARD_STB] = {
 382                .name           = "STB, Gateway P/N 6000699 (bt848)",
 383                .video_inputs   = 3,
 384                /* .audio_inputs= 1, */
 385                .svhs           = 2,
 386                .gpiomask       = 7,
 387                .muxsel         = MUXSEL(2, 3, 1, 1),
 388                .gpiomux        = { 4, 0, 2, 3 },
 389                .gpiomute       = 1,
 390                .no_msp34xx     = 1,
 391                .tuner_type     = TUNER_PHILIPS_NTSC,
 392                .tuner_addr     = ADDR_UNSET,
 393                .pll            = PLL_28,
 394                .has_radio      = 1,
 395        },
 396
 397        /* ---- card 0x04 ---------------------------------- */
 398        [BTTV_BOARD_INTEL] = {
 399                .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 400                .video_inputs   = 4,
 401                /* .audio_inputs= 0, */
 402                .svhs           = 2,
 403                .gpiomask       = 0,
 404                .muxsel         = MUXSEL(2, 3, 1, 1),
 405                .gpiomux        = { 0 },
 406                .tuner_type     = TUNER_ABSENT,
 407                .tuner_addr     = ADDR_UNSET,
 408        },
 409        [BTTV_BOARD_DIAMOND] = {
 410                .name           = "Diamond DTV2000",
 411                .video_inputs   = 4,
 412                /* .audio_inputs= 1, */
 413                .svhs           = 2,
 414                .gpiomask       = 3,
 415                .muxsel         = MUXSEL(2, 3, 1, 0),
 416                .gpiomux        = { 0, 1, 0, 1 },
 417                .gpiomute       = 3,
 418                .tuner_type     = UNSET,
 419                .tuner_addr     = ADDR_UNSET,
 420        },
 421        [BTTV_BOARD_AVERMEDIA] = {
 422                .name           = "AVerMedia TVPhone",
 423                .video_inputs   = 3,
 424                /* .audio_inputs= 1, */
 425                .svhs           = 3,
 426                .muxsel         = MUXSEL(2, 3, 1, 1),
 427                .gpiomask       = 0x0f,
 428                .gpiomux        = { 0x0c, 0x04, 0x08, 0x04 },
 429                /*                0x04 for some cards ?? */
 430                .tuner_type     = UNSET,
 431                .tuner_addr     = ADDR_UNSET,
 432                .audio_mode_gpio= avermedia_tvphone_audio,
 433                .has_remote     = 1,
 434        },
 435        [BTTV_BOARD_MATRIX_VISION] = {
 436                .name           = "MATRIX-Vision MV-Delta",
 437                .video_inputs   = 5,
 438                /* .audio_inputs= 1, */
 439                .svhs           = 3,
 440                .gpiomask       = 0,
 441                .muxsel         = MUXSEL(2, 3, 1, 0, 0),
 442                .gpiomux        = { 0 },
 443                .tuner_type     = TUNER_ABSENT,
 444                .tuner_addr     = ADDR_UNSET,
 445        },
 446
 447        /* ---- card 0x08 ---------------------------------- */
 448        [BTTV_BOARD_FLYVIDEO] = {
 449                .name           = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
 450                .video_inputs   = 4,
 451                /* .audio_inputs= 1, */
 452                .svhs           = 2,
 453                .gpiomask       = 0xc00,
 454                .muxsel         = MUXSEL(2, 3, 1, 1),
 455                .gpiomux        = { 0, 0xc00, 0x800, 0x400 },
 456                .gpiomute       = 0xc00,
 457                .pll            = PLL_28,
 458                .tuner_type     = UNSET,
 459                .tuner_addr     = ADDR_UNSET,
 460        },
 461        [BTTV_BOARD_TURBOTV] = {
 462                .name           = "IMS/IXmicro TurboTV",
 463                .video_inputs   = 3,
 464                /* .audio_inputs= 1, */
 465                .svhs           = 2,
 466                .gpiomask       = 3,
 467                .muxsel         = MUXSEL(2, 3, 1, 1),
 468                .gpiomux        = { 1, 1, 2, 3 },
 469                .pll            = PLL_28,
 470                .tuner_type     = TUNER_TEMIC_PAL,
 471                .tuner_addr     = ADDR_UNSET,
 472        },
 473        [BTTV_BOARD_HAUPPAUGE878] = {
 474                .name           = "Hauppauge (bt878)",
 475                .video_inputs   = 4,
 476                /* .audio_inputs= 1, */
 477                .svhs           = 2,
 478                .gpiomask       = 0x0f, /* old: 7 */
 479                .muxsel         = MUXSEL(2, 0, 1, 1),
 480                .gpiomux        = { 0, 1, 2, 3 },
 481                .gpiomute       = 4,
 482                .pll            = PLL_28,
 483                .tuner_type     = UNSET,
 484                .tuner_addr     = ADDR_UNSET,
 485        },
 486        [BTTV_BOARD_MIROPRO] = {
 487                .name           = "MIRO PCTV pro",
 488                .video_inputs   = 3,
 489                /* .audio_inputs= 1, */
 490                .svhs           = 2,
 491                .gpiomask       = 0x3014f,
 492                .muxsel         = MUXSEL(2, 3, 1, 1),
 493                .gpiomux        = { 0x20001,0x10001, 0, 0 },
 494                .gpiomute       = 10,
 495                .tuner_type     = UNSET,
 496                .tuner_addr     = ADDR_UNSET,
 497        },
 498
 499        /* ---- card 0x0c ---------------------------------- */
 500        [BTTV_BOARD_ADSTECH_TV] = {
 501                .name           = "ADS Technologies Channel Surfer TV (bt848)",
 502                .video_inputs   = 3,
 503                /* .audio_inputs= 1, */
 504                .svhs           = 2,
 505                .gpiomask       = 15,
 506                .muxsel         = MUXSEL(2, 3, 1, 1),
 507                .gpiomux        = { 13, 14, 11, 7 },
 508                .tuner_type     = UNSET,
 509                .tuner_addr     = ADDR_UNSET,
 510        },
 511        [BTTV_BOARD_AVERMEDIA98] = {
 512                .name           = "AVerMedia TVCapture 98",
 513                .video_inputs   = 3,
 514                /* .audio_inputs= 4, */
 515                .svhs           = 2,
 516                .gpiomask       = 15,
 517                .muxsel         = MUXSEL(2, 3, 1, 1),
 518                .gpiomux        = { 13, 14, 11, 7 },
 519                .msp34xx_alt    = 1,
 520                .pll            = PLL_28,
 521                .tuner_type     = TUNER_PHILIPS_PAL,
 522                .tuner_addr     = ADDR_UNSET,
 523                .audio_mode_gpio= avermedia_tv_stereo_audio,
 524                .no_gpioirq     = 1,
 525        },
 526        [BTTV_BOARD_VHX] = {
 527                .name           = "Aimslab Video Highway Xtreme (VHX)",
 528                .video_inputs   = 3,
 529                /* .audio_inputs= 1, */
 530                .svhs           = 2,
 531                .gpiomask       = 7,
 532                .muxsel         = MUXSEL(2, 3, 1, 1),
 533                .gpiomux        = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
 534                .gpiomute       = 4,
 535                .pll            = PLL_28,
 536                .tuner_type     = UNSET,
 537                .tuner_addr     = ADDR_UNSET,
 538        },
 539        [BTTV_BOARD_ZOLTRIX] = {
 540                .name           = "Zoltrix TV-Max",
 541                .video_inputs   = 3,
 542                /* .audio_inputs= 1, */
 543                .svhs           = 2,
 544                .gpiomask       = 15,
 545                .muxsel         = MUXSEL(2, 3, 1, 1),
 546                .gpiomux        = { 0, 0, 1, 0 },
 547                .gpiomute       = 10,
 548                .tuner_type     = UNSET,
 549                .tuner_addr     = ADDR_UNSET,
 550        },
 551
 552        /* ---- card 0x10 ---------------------------------- */
 553        [BTTV_BOARD_PIXVIEWPLAYTV] = {
 554                .name           = "Prolink Pixelview PlayTV (bt878)",
 555                .video_inputs   = 3,
 556                /* .audio_inputs= 1, */
 557                .svhs           = 2,
 558                .gpiomask       = 0x01fe00,
 559                .muxsel         = MUXSEL(2, 3, 1, 1),
 560                /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
 561                .gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
 562                .gpiomute       = 0x002000,
 563                .pll            = PLL_28,
 564                .tuner_type     = UNSET,
 565                .tuner_addr     = ADDR_UNSET,
 566        },
 567        [BTTV_BOARD_WINVIEW_601] = {
 568                .name           = "Leadtek WinView 601",
 569                .video_inputs   = 3,
 570                /* .audio_inputs= 1, */
 571                .svhs           = 2,
 572                .gpiomask       = 0x8300f8,
 573                .muxsel         = MUXSEL(2, 3, 1, 1, 0),
 574                .gpiomux        = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
 575                .gpiomute       = 0xcfa007,
 576                .tuner_type     = UNSET,
 577                .tuner_addr     = ADDR_UNSET,
 578                .volume_gpio    = winview_volume,
 579                .has_radio      = 1,
 580        },
 581        [BTTV_BOARD_AVEC_INTERCAP] = {
 582                .name           = "AVEC Intercapture",
 583                .video_inputs   = 3,
 584                /* .audio_inputs= 2, */
 585                .svhs           = 2,
 586                .gpiomask       = 0,
 587                .muxsel         = MUXSEL(2, 3, 1, 1),
 588                .gpiomux        = { 1, 0, 0, 0 },
 589                .tuner_type     = UNSET,
 590                .tuner_addr     = ADDR_UNSET,
 591        },
 592        [BTTV_BOARD_LIFE_FLYKIT] = {
 593                .name           = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
 594                .video_inputs   = 4,
 595                /* .audio_inputs= 1, */
 596                .svhs           = NO_SVHS,
 597                .gpiomask       = 0x8dff00,
 598                .muxsel         = MUXSEL(2, 3, 1, 1),
 599                .gpiomux        = { 0 },
 600                .no_msp34xx     = 1,
 601                .tuner_type     = TUNER_ABSENT,
 602                .tuner_addr     = ADDR_UNSET,
 603        },
 604
 605        /* ---- card 0x14 ---------------------------------- */
 606        [BTTV_BOARD_CEI_RAFFLES] = {
 607                .name           = "CEI Raffles Card",
 608                .video_inputs   = 3,
 609                /* .audio_inputs= 3, */
 610                .svhs           = 2,
 611                .muxsel         = MUXSEL(2, 3, 1, 1),
 612                .tuner_type     = UNSET,
 613                .tuner_addr     = ADDR_UNSET,
 614        },
 615        [BTTV_BOARD_CONFERENCETV] = {
 616                .name           = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
 617                .video_inputs   = 4,
 618                /* .audio_inputs= 2,  tuner, line in */
 619                .svhs           = 2,
 620                .gpiomask       = 0x1800,
 621                .muxsel         = MUXSEL(2, 3, 1, 1),
 622                .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 623                .gpiomute       = 0x1800,
 624                .pll            = PLL_28,
 625                .tuner_type     = TUNER_PHILIPS_PAL_I,
 626                .tuner_addr     = ADDR_UNSET,
 627        },
 628        [BTTV_BOARD_PHOEBE_TVMAS] = {
 629                .name           = "Askey CPH050/ Phoebe Tv Master + FM",
 630                .video_inputs   = 3,
 631                /* .audio_inputs= 1, */
 632                .svhs           = 2,
 633                .gpiomask       = 0xc00,
 634                .muxsel         = MUXSEL(2, 3, 1, 1),
 635                .gpiomux        = { 0, 1, 0x800, 0x400 },
 636                .gpiomute       = 0xc00,
 637                .pll            = PLL_28,
 638                .tuner_type     = UNSET,
 639                .tuner_addr     = ADDR_UNSET,
 640        },
 641        [BTTV_BOARD_MODTEC_205] = {
 642                .name           = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
 643                .video_inputs   = 3,
 644                /* .audio_inputs= 1, */
 645                .svhs           = NO_SVHS,
 646                .has_dig_in     = 1,
 647                .gpiomask       = 7,
 648                .muxsel         = MUXSEL(2, 3, 0), /* input 2 is digital */
 649                /* .digital_mode= DIGITAL_MODE_CAMERA, */
 650                .gpiomux        = { 0, 0, 0, 0 },
 651                .no_msp34xx     = 1,
 652                .pll            = PLL_28,
 653                .tuner_type     = TUNER_ALPS_TSBB5_PAL_I,
 654                .tuner_addr     = ADDR_UNSET,
 655        },
 656
 657        /* ---- card 0x18 ---------------------------------- */
 658        [BTTV_BOARD_MAGICTVIEW061] = {
 659                .name           = "Askey CPH05X/06X (bt878) [many vendors]",
 660                .video_inputs   = 3,
 661                /* .audio_inputs= 1, */
 662                .svhs           = 2,
 663                .gpiomask       = 0xe00,
 664                .muxsel         = MUXSEL(2, 3, 1, 1),
 665                .gpiomux        = {0x400, 0x400, 0x400, 0x400 },
 666                .gpiomute       = 0xc00,
 667                .pll            = PLL_28,
 668                .tuner_type     = UNSET,
 669                .tuner_addr     = ADDR_UNSET,
 670                .has_remote     = 1,
 671                .has_radio      = 1,  /* not every card has radio */
 672        },
 673        [BTTV_BOARD_VOBIS_BOOSTAR] = {
 674                .name           = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
 675                .video_inputs   = 3,
 676                /* .audio_inputs= 1, */
 677                .svhs           = 2,
 678                .gpiomask       = 0x1f0fff,
 679                .muxsel         = MUXSEL(2, 3, 1, 1),
 680                .gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
 681                .gpiomute       = 0x40000,
 682                .tuner_type     = TUNER_PHILIPS_PAL,
 683                .tuner_addr     = ADDR_UNSET,
 684                .audio_mode_gpio= terratv_audio,
 685        },
 686        [BTTV_BOARD_HAUPPAUG_WCAM] = {
 687                .name           = "Hauppauge WinCam newer (bt878)",
 688                .video_inputs   = 4,
 689                /* .audio_inputs= 1, */
 690                .svhs           = 3,
 691                .gpiomask       = 7,
 692                .muxsel         = MUXSEL(2, 0, 1, 1),
 693                .gpiomux        = { 0, 1, 2, 3 },
 694                .gpiomute       = 4,
 695                .tuner_type     = UNSET,
 696                .tuner_addr     = ADDR_UNSET,
 697        },
 698        [BTTV_BOARD_MAXI] = {
 699                .name           = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
 700                .video_inputs   = 4,
 701                /* .audio_inputs= 2, */
 702                .svhs           = 2,
 703                .gpiomask       = 0x1800,
 704                .muxsel         = MUXSEL(2, 3, 1, 1),
 705                .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 706                .gpiomute       = 0x1800,
 707                .pll            = PLL_28,
 708                .tuner_type     = TUNER_PHILIPS_SECAM,
 709                .tuner_addr     = ADDR_UNSET,
 710        },
 711
 712        /* ---- card 0x1c ---------------------------------- */
 713        [BTTV_BOARD_TERRATV] = {
 714                .name           = "Terratec TerraTV+ Version 1.1 (bt878)",
 715                .video_inputs   = 3,
 716                /* .audio_inputs= 1, */
 717                .svhs           = 2,
 718                .gpiomask       = 0x1f0fff,
 719                .muxsel         = MUXSEL(2, 3, 1, 1),
 720                .gpiomux        = { 0x20000, 0x30000, 0x10000, 0x00000 },
 721                .gpiomute       = 0x40000,
 722                .tuner_type     = TUNER_PHILIPS_PAL,
 723                .tuner_addr     = ADDR_UNSET,
 724                .audio_mode_gpio= terratv_audio,
 725                /* GPIO wiring:
 726                External 20 pin connector (for Active Radio Upgrade board)
 727                gpio00: i2c-sda
 728                gpio01: i2c-scl
 729                gpio02: om5610-data
 730                gpio03: om5610-clk
 731                gpio04: om5610-wre
 732                gpio05: om5610-stereo
 733                gpio06: rds6588-davn
 734                gpio07: Pin 7 n.c.
 735                gpio08: nIOW
 736                gpio09+10: nIOR, nSEL ?? (bt878)
 737                        gpio09: nIOR (bt848)
 738                        gpio10: nSEL (bt848)
 739                Sound Routing:
 740                gpio16: u2-A0 (1st 4052bt)
 741                gpio17: u2-A1
 742                gpio18: u2-nEN
 743                gpio19: u4-A0 (2nd 4052)
 744                gpio20: u4-A1
 745                        u4-nEN - GND
 746                Btspy:
 747                        00000 : Cdrom (internal audio input)
 748                        10000 : ext. Video audio input
 749                        20000 : TV Mono
 750                        a0000 : TV Mono/2
 751                1a0000 : TV Stereo
 752                        30000 : Radio
 753                        40000 : Mute
 754        */
 755
 756        },
 757        [BTTV_BOARD_PXC200] = {
 758                /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
 759                .name           = "Imagenation PXC200",
 760                .video_inputs   = 5,
 761                /* .audio_inputs= 1, */
 762                .svhs           = 1, /* was: 4 */
 763                .gpiomask       = 0,
 764                .muxsel         = MUXSEL(2, 3, 1, 0, 0),
 765                .gpiomux        = { 0 },
 766                .tuner_type     = TUNER_ABSENT,
 767                .tuner_addr     = ADDR_UNSET,
 768                .muxsel_hook    = PXC200_muxsel,
 769
 770        },
 771        [BTTV_BOARD_FLYVIDEO_98] = {
 772                .name           = "Lifeview FlyVideo 98 LR50",
 773                .video_inputs   = 4,
 774                /* .audio_inputs= 1, */
 775                .svhs           = 2,
 776                .gpiomask       = 0x1800,  /* 0x8dfe00 */
 777                .muxsel         = MUXSEL(2, 3, 1, 1),
 778                .gpiomux        = { 0, 0x0800, 0x1000, 0x1000 },
 779                .gpiomute       = 0x1800,
 780                .pll            = PLL_28,
 781                .tuner_type     = UNSET,
 782                .tuner_addr     = ADDR_UNSET,
 783        },
 784        [BTTV_BOARD_IPROTV] = {
 785                .name           = "Formac iProTV, Formac ProTV I (bt848)",
 786                .video_inputs   = 4,
 787                /* .audio_inputs= 1, */
 788                .svhs           = 3,
 789                .gpiomask       = 1,
 790                .muxsel         = MUXSEL(2, 3, 1, 1),
 791                .gpiomux        = { 1, 0, 0, 0 },
 792                .pll            = PLL_28,
 793                .tuner_type     = TUNER_PHILIPS_PAL,
 794                .tuner_addr     = ADDR_UNSET,
 795        },
 796
 797        /* ---- card 0x20 ---------------------------------- */
 798        [BTTV_BOARD_INTEL_C_S_PCI] = {
 799                .name           = "Intel Create and Share PCI/ Smart Video Recorder III",
 800                .video_inputs   = 4,
 801                /* .audio_inputs= 0, */
 802                .svhs           = 2,
 803                .gpiomask       = 0,
 804                .muxsel         = MUXSEL(2, 3, 1, 1),
 805                .gpiomux        = { 0 },
 806                .tuner_type     = TUNER_ABSENT,
 807                .tuner_addr     = ADDR_UNSET,
 808        },
 809        [BTTV_BOARD_TERRATVALUE] = {
 810                .name           = "Terratec TerraTValue Version Bt878",
 811                .video_inputs   = 3,
 812                /* .audio_inputs= 1, */
 813                .svhs           = 2,
 814                .gpiomask       = 0xffff00,
 815                .muxsel         = MUXSEL(2, 3, 1, 1),
 816                .gpiomux        = { 0x500, 0, 0x300, 0x900 },
 817                .gpiomute       = 0x900,
 818                .pll            = PLL_28,
 819                .tuner_type     = TUNER_PHILIPS_PAL,
 820                .tuner_addr     = ADDR_UNSET,
 821        },
 822        [BTTV_BOARD_WINFAST2000] = {
 823                .name           = "Leadtek WinFast 2000/ WinFast 2000 XP",
 824                .video_inputs   = 4,
 825                /* .audio_inputs= 1, */
 826                .svhs           = 2,
 827                /* TV, CVid, SVid, CVid over SVid connector */
 828                .muxsel         = MUXSEL(2, 3, 1, 1, 0),
 829                /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
 830                .gpiomask       = 0xb33000,
 831                .gpiomux        = { 0x122000,0x1000,0x0000,0x620000 },
 832                .gpiomute       = 0x800000,
 833                /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
 834                        gpio23 -- hef4052:nEnable (0x800000)
 835                        gpio12 -- hef4052:A1
 836                        gpio13 -- hef4052:A0
 837                0x0000: external audio
 838                0x1000: FM
 839                0x2000: TV
 840                0x3000: n.c.
 841                Note: There exists another variant "Winfast 2000" with tv stereo !?
 842                Note: eeprom only contains FF and pci subsystem id 107d:6606
 843                */
 844                .pll            = PLL_28,
 845                .has_radio      = 1,
 846                .tuner_type     = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
 847                .tuner_addr     = ADDR_UNSET,
 848                .audio_mode_gpio= winfast2000_audio,
 849                .has_remote     = 1,
 850        },
 851        [BTTV_BOARD_CHRONOS_VS2] = {
 852                .name           = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
 853                .video_inputs   = 4,
 854                /* .audio_inputs= 3, */
 855                .svhs           = 2,
 856                .gpiomask       = 0x1800,
 857                .muxsel         = MUXSEL(2, 3, 1, 1),
 858                .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 859                .gpiomute       = 0x1800,
 860                .pll            = PLL_28,
 861                .tuner_type     = UNSET,
 862                .tuner_addr     = ADDR_UNSET,
 863        },
 864
 865        /* ---- card 0x24 ---------------------------------- */
 866        [BTTV_BOARD_TYPHOON_TVIEW] = {
 867                .name           = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
 868                .video_inputs   = 4,
 869                /* .audio_inputs= 3, */
 870                .svhs           = 2,
 871                .gpiomask       = 0x1800,
 872                .muxsel         = MUXSEL(2, 3, 1, 1),
 873                .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
 874                .gpiomute       = 0x1800,
 875                .pll            = PLL_28,
 876                .tuner_type     = UNSET,
 877                .tuner_addr     = ADDR_UNSET,
 878                .has_radio      = 1,
 879        },
 880        [BTTV_BOARD_PXELVWPLTVPRO] = {
 881                .name           = "Prolink PixelView PlayTV pro",
 882                .video_inputs   = 3,
 883                /* .audio_inputs= 1, */
 884                .svhs           = 2,
 885                .gpiomask       = 0xff,
 886                .muxsel         = MUXSEL(2, 3, 1, 1),
 887                .gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
 888                .gpiomute       = 0x29,
 889                .no_msp34xx     = 1,
 890                .pll            = PLL_28,
 891                .tuner_type     = UNSET,
 892                .tuner_addr     = ADDR_UNSET,
 893        },
 894        [BTTV_BOARD_MAGICTVIEW063] = {
 895                .name           = "Askey CPH06X TView99",
 896                .video_inputs   = 4,
 897                /* .audio_inputs= 1, */
 898                .svhs           = 2,
 899                .gpiomask       = 0x551e00,
 900                .muxsel         = MUXSEL(2, 3, 1, 0),
 901                .gpiomux        = { 0x551400, 0x551200, 0, 0 },
 902                .gpiomute       = 0x551c00,
 903                .pll            = PLL_28,
 904                .tuner_type     = TUNER_PHILIPS_PAL_I,
 905                .tuner_addr     = ADDR_UNSET,
 906                .has_remote     = 1,
 907        },
 908        [BTTV_BOARD_PINNACLE] = {
 909                .name           = "Pinnacle PCTV Studio/Rave",
 910                .video_inputs   = 3,
 911                /* .audio_inputs= 1, */
 912                .svhs           = 2,
 913                .gpiomask       = 0x03000F,
 914                .muxsel         = MUXSEL(2, 3, 1, 1),
 915                .gpiomux        = { 2, 0xd0001, 0, 0 },
 916                .gpiomute       = 1,
 917                .pll            = PLL_28,
 918                .tuner_type     = UNSET,
 919                .tuner_addr     = ADDR_UNSET,
 920        },
 921
 922        /* ---- card 0x28 ---------------------------------- */
 923        [BTTV_BOARD_STB2] = {
 924                .name           = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
 925                .video_inputs   = 3,
 926                /* .audio_inputs= 1, */
 927                .svhs           = 2,
 928                .gpiomask       = 7,
 929                .muxsel         = MUXSEL(2, 3, 1, 1),
 930                .gpiomux        = { 4, 0, 2, 3 },
 931                .gpiomute       = 1,
 932                .no_msp34xx     = 1,
 933                .tuner_type     = TUNER_PHILIPS_NTSC,
 934                .tuner_addr     = ADDR_UNSET,
 935                .pll            = PLL_28,
 936                .has_radio      = 1,
 937        },
 938        [BTTV_BOARD_AVPHONE98] = {
 939                .name           = "AVerMedia TVPhone 98",
 940                .video_inputs   = 3,
 941                /* .audio_inputs= 4, */
 942                .svhs           = 2,
 943                .gpiomask       = 15,
 944                .muxsel         = MUXSEL(2, 3, 1, 1),
 945                .gpiomux        = { 13, 4, 11, 7 },
 946                .pll            = PLL_28,
 947                .tuner_type     = UNSET,
 948                .tuner_addr     = ADDR_UNSET,
 949                .has_radio      = 1,
 950                .audio_mode_gpio= avermedia_tvphone_audio,
 951        },
 952        [BTTV_BOARD_PV951] = {
 953                .name           = "ProVideo PV951", /* pic16c54 */
 954                .video_inputs   = 3,
 955                /* .audio_inputs= 1, */
 956                .svhs           = 2,
 957                .gpiomask       = 0,
 958                .muxsel         = MUXSEL(2, 3, 1, 1),
 959                .gpiomux        = { 0, 0, 0, 0},
 960                .no_msp34xx     = 1,
 961                .pll            = PLL_28,
 962                .tuner_type     = TUNER_PHILIPS_PAL_I,
 963                .tuner_addr     = ADDR_UNSET,
 964        },
 965        [BTTV_BOARD_ONAIR_TV] = {
 966                .name           = "Little OnAir TV",
 967                .video_inputs   = 3,
 968                /* .audio_inputs= 1, */
 969                .svhs           = 2,
 970                .gpiomask       = 0xe00b,
 971                .muxsel         = MUXSEL(2, 3, 1, 1),
 972                .gpiomux        = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
 973                .gpiomute       = 0xff3ffc,
 974                .no_msp34xx     = 1,
 975                .tuner_type     = UNSET,
 976                .tuner_addr     = ADDR_UNSET,
 977        },
 978
 979        /* ---- card 0x2c ---------------------------------- */
 980        [BTTV_BOARD_SIGMA_TVII_FM] = {
 981                .name           = "Sigma TVII-FM",
 982                .video_inputs   = 2,
 983                /* .audio_inputs= 1, */
 984                .svhs           = NO_SVHS,
 985                .gpiomask       = 3,
 986                .muxsel         = MUXSEL(2, 3, 1, 1),
 987                .gpiomux        = { 1, 1, 0, 2 },
 988                .gpiomute       = 3,
 989                .no_msp34xx     = 1,
 990                .pll            = PLL_NONE,
 991                .tuner_type     = UNSET,
 992                .tuner_addr     = ADDR_UNSET,
 993        },
 994        [BTTV_BOARD_MATRIX_VISION2] = {
 995                .name           = "MATRIX-Vision MV-Delta 2",
 996                .video_inputs   = 5,
 997                /* .audio_inputs= 1, */
 998                .svhs           = 3,
 999                .gpiomask       = 0,
1000                .muxsel         = MUXSEL(2, 3, 1, 0, 0),
1001                .gpiomux        = { 0 },
1002                .no_msp34xx     = 1,
1003                .pll            = PLL_28,
1004                .tuner_type     = TUNER_ABSENT,
1005                .tuner_addr     = ADDR_UNSET,
1006        },
1007        [BTTV_BOARD_ZOLTRIX_GENIE] = {
1008                .name           = "Zoltrix Genie TV/FM",
1009                .video_inputs   = 3,
1010                /* .audio_inputs= 1, */
1011                .svhs           = 2,
1012                .gpiomask       = 0xbcf03f,
1013                .muxsel         = MUXSEL(2, 3, 1, 1),
1014                .gpiomux        = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1015                .gpiomute       = 0xbcb03f,
1016                .no_msp34xx     = 1,
1017                .pll            = PLL_28,
1018                .tuner_type     = TUNER_TEMIC_4039FR5_NTSC,
1019                .tuner_addr     = ADDR_UNSET,
1020        },
1021        [BTTV_BOARD_TERRATVRADIO] = {
1022                .name           = "Terratec TV/Radio+",
1023                .video_inputs   = 3,
1024                /* .audio_inputs= 1, */
1025                .svhs           = 2,
1026                .gpiomask       = 0x70000,
1027                .muxsel         = MUXSEL(2, 3, 1, 1),
1028                .gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
1029                .gpiomute       = 0x40000,
1030                .no_msp34xx     = 1,
1031                .pll            = PLL_35,
1032                .tuner_type     = TUNER_PHILIPS_PAL_I,
1033                .tuner_addr     = ADDR_UNSET,
1034                .has_radio      = 1,
1035        },
1036
1037        /* ---- card 0x30 ---------------------------------- */
1038        [BTTV_BOARD_DYNALINK] = {
1039                .name           = "Askey CPH03x/ Dynalink Magic TView",
1040                .video_inputs   = 3,
1041                /* .audio_inputs= 1, */
1042                .svhs           = 2,
1043                .gpiomask       = 15,
1044                .muxsel         = MUXSEL(2, 3, 1, 1),
1045                .gpiomux        = {2,0,0,0 },
1046                .gpiomute       = 1,
1047                .pll            = PLL_28,
1048                .tuner_type     = UNSET,
1049                .tuner_addr     = ADDR_UNSET,
1050        },
1051        [BTTV_BOARD_GVBCTV3PCI] = {
1052                .name           = "IODATA GV-BCTV3/PCI",
1053                .video_inputs   = 3,
1054                /* .audio_inputs= 1, */
1055                .svhs           = 2,
1056                .gpiomask       = 0x010f00,
1057                .muxsel         = MUXSEL(2, 3, 0, 0),
1058                .gpiomux        = {0x10000, 0, 0x10000, 0 },
1059                .no_msp34xx     = 1,
1060                .pll            = PLL_28,
1061                .tuner_type     = TUNER_ALPS_TSHC6_NTSC,
1062                .tuner_addr     = ADDR_UNSET,
1063                .audio_mode_gpio= gvbctv3pci_audio,
1064        },
1065        [BTTV_BOARD_PXELVWPLTVPAK] = {
1066                .name           = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1067                .video_inputs   = 5,
1068                /* .audio_inputs= 1, */
1069                .svhs           = 3,
1070                .has_dig_in     = 1,
1071                .gpiomask       = 0xAA0000,
1072                .muxsel         = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
1073                /* .digital_mode= DIGITAL_MODE_CAMERA, */
1074                .gpiomux        = { 0x20000, 0, 0x80000, 0x80000 },
1075                .gpiomute       = 0xa8000,
1076                .no_msp34xx     = 1,
1077                .pll            = PLL_28,
1078                .tuner_type     = TUNER_PHILIPS_PAL_I,
1079                .tuner_addr     = ADDR_UNSET,
1080                .has_remote     = 1,
1081                /* GPIO wiring: (different from Rev.4C !)
1082                        GPIO17: U4.A0 (first hef4052bt)
1083                        GPIO19: U4.A1
1084                        GPIO20: U5.A1 (second hef4052bt)
1085                        GPIO21: U4.nEN
1086                        GPIO22: BT832 Reset Line
1087                        GPIO23: A5,A0, U5,nEN
1088                Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1089                */
1090        },
1091        [BTTV_BOARD_EAGLE] = {
1092                .name           = "Eagle Wireless Capricorn2 (bt878A)",
1093                .video_inputs   = 4,
1094                /* .audio_inputs= 1, */
1095                .svhs           = 2,
1096                .gpiomask       = 7,
1097                .muxsel         = MUXSEL(2, 0, 1, 1),
1098                .gpiomux        = { 0, 1, 2, 3 },
1099                .gpiomute       = 4,
1100                .pll            = PLL_28,
1101                .tuner_type     = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
1102                .tuner_addr     = ADDR_UNSET,
1103        },
1104
1105        /* ---- card 0x34 ---------------------------------- */
1106        [BTTV_BOARD_PINNACLEPRO] = {
1107                /* David Härdeman <david@2gen.com> */
1108                .name           = "Pinnacle PCTV Studio Pro",
1109                .video_inputs   = 4,
1110                /* .audio_inputs= 1, */
1111                .svhs           = 3,
1112                .gpiomask       = 0x03000F,
1113                .muxsel         = MUXSEL(2, 3, 1, 1),
1114                .gpiomux        = { 1, 0xd0001, 0, 0 },
1115                .gpiomute       = 10,
1116                                /* sound path (5 sources):
1117                                MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1118                                        0= ext. Audio IN
1119                                        1= from MUX2
1120                                        2= Mono TV sound from Tuner
1121                                        3= not connected
1122                                MUX2 (mask 0x30000):
1123                                        0,2,3= from MSP34xx
1124                                        1= FM stereo Radio from Tuner */
1125                .pll            = PLL_28,
1126                .tuner_type     = UNSET,
1127                .tuner_addr     = ADDR_UNSET,
1128        },
1129        [BTTV_BOARD_TVIEW_RDS_FM] = {
1130                /* Claas Langbehn <claas@bigfoot.com>,
1131                Sven Grothklags <sven@upb.de> */
1132                .name           = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1133                .video_inputs   = 4,
1134                /* .audio_inputs= 3, */
1135                .svhs           = 2,
1136                .gpiomask       = 0x1c,
1137                .muxsel         = MUXSEL(2, 3, 1, 1),
1138                .gpiomux        = { 0, 0, 0x10, 8 },
1139                .gpiomute       = 4,
1140                .pll            = PLL_28,
1141                .tuner_type     = TUNER_PHILIPS_PAL,
1142                .tuner_addr     = ADDR_UNSET,
1143                .has_radio      = 1,
1144        },
1145        [BTTV_BOARD_LIFETEC_9415] = {
1146                /* Tim Röstermundt <rosterm@uni-muenster.de>
1147                in de.comp.os.unix.linux.hardware:
1148                        options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1149                        gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1150                        options tuner type=5 */
1151                .name           = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1152                .video_inputs   = 4,
1153                /* .audio_inputs= 1, */
1154                .svhs           = 2,
1155                .gpiomask       = 0x18e0,
1156                .muxsel         = MUXSEL(2, 3, 1, 1),
1157                .gpiomux        = { 0x0000,0x0800,0x1000,0x1000 },
1158                .gpiomute       = 0x18e0,
1159                        /* For cards with tda9820/tda9821:
1160                                0x0000: Tuner normal stereo
1161                                0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1162                                0x0880: Tuner A2 stereo */
1163                .pll            = PLL_28,
1164                .tuner_type     = UNSET,
1165                .tuner_addr     = ADDR_UNSET,
1166        },
1167        [BTTV_BOARD_BESTBUY_EASYTV] = {
1168                /* Miguel Angel Alvarez <maacruz@navegalia.com>
1169                old Easy TV BT848 version (model CPH031) */
1170                .name           = "Askey CPH031/ BESTBUY Easy TV",
1171                .video_inputs   = 4,
1172                /* .audio_inputs= 1, */
1173                .svhs           = 2,
1174                .gpiomask       = 0xF,
1175                .muxsel         = MUXSEL(2, 3, 1, 0),
1176                .gpiomux        = { 2, 0, 0, 0 },
1177                .gpiomute       = 10,
1178                .pll            = PLL_28,
1179                .tuner_type     = TUNER_TEMIC_PAL,
1180                .tuner_addr     = ADDR_UNSET,
1181        },
1182
1183        /* ---- card 0x38 ---------------------------------- */
1184        [BTTV_BOARD_FLYVIDEO_98FM] = {
1185                /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1186                .name           = "Lifeview FlyVideo 98FM LR50",
1187                .video_inputs   = 4,
1188                /* .audio_inputs= 3, */
1189                .svhs           = 2,
1190                .gpiomask       = 0x1800,
1191                .muxsel         = MUXSEL(2, 3, 1, 1),
1192                .gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
1193                .gpiomute       = 0x1800,
1194                .pll            = PLL_28,
1195                .tuner_type     = TUNER_PHILIPS_PAL,
1196                .tuner_addr     = ADDR_UNSET,
1197        },
1198                /* This is the ultimate cheapo capture card
1199                * just a BT848A on a small PCB!
1200                * Steve Hosgood <steve@equiinet.com> */
1201        [BTTV_BOARD_GRANDTEC] = {
1202                .name           = "GrandTec 'Grand Video Capture' (Bt848)",
1203                .video_inputs   = 2,
1204                /* .audio_inputs= 0, */
1205                .svhs           = 1,
1206                .gpiomask       = 0,
1207                .muxsel         = MUXSEL(3, 1),
1208                .gpiomux        = { 0 },
1209                .no_msp34xx     = 1,
1210                .pll            = PLL_35,
1211                .tuner_type     = TUNER_ABSENT,
1212                .tuner_addr     = ADDR_UNSET,
1213        },
1214        [BTTV_BOARD_ASKEY_CPH060] = {
1215                /* Daniel Herrington <daniel.herrington@home.com> */
1216                .name           = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1217                .video_inputs   = 3,
1218                /* .audio_inputs= 1, */
1219                .svhs           = 2,
1220                .gpiomask       = 0xe00,
1221                .muxsel         = MUXSEL(2, 3, 1, 1),
1222                .gpiomux        = { 0x400, 0x400, 0x400, 0x400 },
1223                .gpiomute       = 0x800,
1224                .pll            = PLL_28,
1225                .tuner_type     = TUNER_TEMIC_4036FY5_NTSC,
1226                .tuner_addr     = ADDR_UNSET,
1227        },
1228        [BTTV_BOARD_ASKEY_CPH03X] = {
1229                /* Matti Mottus <mottus@physic.ut.ee> */
1230                .name           = "Askey CPH03x TV Capturer",
1231                .video_inputs   = 4,
1232                /* .audio_inputs= 1, */
1233                .svhs           = 2,
1234                .gpiomask       = 0x03000F,
1235                .muxsel         = MUXSEL(2, 3, 1, 0),
1236                .gpiomux        = { 2, 0, 0, 0 },
1237                .gpiomute       = 1,
1238                .pll            = PLL_28,
1239                .tuner_type     = TUNER_TEMIC_PAL,
1240                .tuner_addr     = ADDR_UNSET,
1241                .has_remote     = 1,
1242        },
1243
1244        /* ---- card 0x3c ---------------------------------- */
1245        [BTTV_BOARD_MM100PCTV] = {
1246                /* Philip Blundell <philb@gnu.org> */
1247                .name           = "Modular Technology MM100PCTV",
1248                .video_inputs   = 2,
1249                /* .audio_inputs= 2, */
1250                .svhs           = NO_SVHS,
1251                .gpiomask       = 11,
1252                .muxsel         = MUXSEL(2, 3, 1, 1),
1253                .gpiomux        = { 2, 0, 0, 1 },
1254                .gpiomute       = 8,
1255                .pll            = PLL_35,
1256                .tuner_type     = TUNER_TEMIC_PAL,
1257                .tuner_addr     = ADDR_UNSET,
1258        },
1259        [BTTV_BOARD_GMV1] = {
1260                /* Adrian Cox <adrian@humboldt.co.uk */
1261                .name           = "AG Electronics GMV1",
1262                .video_inputs   = 2,
1263                /* .audio_inputs= 0, */
1264                .svhs           = 1,
1265                .gpiomask       = 0xF,
1266                .muxsel         = MUXSEL(2, 2),
1267                .gpiomux        = { },
1268                .no_msp34xx     = 1,
1269                .pll            = PLL_28,
1270                .tuner_type     = TUNER_ABSENT,
1271                .tuner_addr     = ADDR_UNSET,
1272        },
1273        [BTTV_BOARD_BESTBUY_EASYTV2] = {
1274                /* Miguel Angel Alvarez <maacruz@navegalia.com>
1275                new Easy TV BT878 version (model CPH061)
1276                special thanks to Informatica Mieres for providing the card */
1277                .name           = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1278                .video_inputs   = 3,
1279                /* .audio_inputs= 2, */
1280                .svhs           = 2,
1281                .gpiomask       = 0xFF,
1282                .muxsel         = MUXSEL(2, 3, 1, 0),
1283                .gpiomux        = { 1, 0, 4, 4 },
1284                .gpiomute       = 9,
1285                .pll            = PLL_28,
1286                .tuner_type     = TUNER_PHILIPS_PAL,
1287                .tuner_addr     = ADDR_UNSET,
1288        },
1289        [BTTV_BOARD_ATI_TVWONDER] = {
1290                /* Lukas Gebauer <geby@volny.cz> */
1291                .name           = "ATI TV-Wonder",
1292                .video_inputs   = 3,
1293                /* .audio_inputs= 1, */
1294                .svhs           = 2,
1295                .gpiomask       = 0xf03f,
1296                .muxsel         = MUXSEL(2, 3, 1, 0),
1297                .gpiomux        = { 0xbffe, 0, 0xbfff, 0 },
1298                .gpiomute       = 0xbffe,
1299                .pll            = PLL_28,
1300                .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1301                .tuner_addr     = ADDR_UNSET,
1302        },
1303
1304        /* ---- card 0x40 ---------------------------------- */
1305        [BTTV_BOARD_ATI_TVWONDERVE] = {
1306                /* Lukas Gebauer <geby@volny.cz> */
1307                .name           = "ATI TV-Wonder VE",
1308                .video_inputs   = 2,
1309                /* .audio_inputs= 1, */
1310                .svhs           = NO_SVHS,
1311                .gpiomask       = 1,
1312                .muxsel         = MUXSEL(2, 3, 0, 1),
1313                .gpiomux        = { 0, 0, 1, 0 },
1314                .no_msp34xx     = 1,
1315                .pll            = PLL_28,
1316                .tuner_type     = TUNER_TEMIC_4006FN5_MULTI_PAL,
1317                .tuner_addr     = ADDR_UNSET,
1318        },
1319        [BTTV_BOARD_FLYVIDEO2000] = {
1320                /* DeeJay <deejay@westel900.net (2000S) */
1321                .name           = "Lifeview FlyVideo 2000S LR90",
1322                .video_inputs   = 3,
1323                /* .audio_inputs= 3, */
1324                .svhs           = 2,
1325                .gpiomask       = 0x18e0,
1326                .muxsel         = MUXSEL(2, 3, 0, 1),
1327                                /* Radio changed from 1e80 to 0x800 to make
1328                                FlyVideo2000S in .hu happy (gm)*/
1329                                /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1330                .gpiomux        = { 0x0000,0x0800,0x1000,0x1000 },
1331                .gpiomute       = 0x1800,
1332                .audio_mode_gpio= fv2000s_audio,
1333                .no_msp34xx     = 1,
1334                .pll            = PLL_28,
1335                .tuner_type     = TUNER_PHILIPS_PAL,
1336                .tuner_addr     = ADDR_UNSET,
1337        },
1338        [BTTV_BOARD_TERRATVALUER] = {
1339                .name           = "Terratec TValueRadio",
1340                .video_inputs   = 3,
1341                /* .audio_inputs= 1, */
1342                .svhs           = 2,
1343                .gpiomask       = 0xffff00,
1344                .muxsel         = MUXSEL(2, 3, 1, 1),
1345                .gpiomux        = { 0x500, 0x500, 0x300, 0x900 },
1346                .gpiomute       = 0x900,
1347                .pll            = PLL_28,
1348                .tuner_type     = TUNER_PHILIPS_PAL,
1349                .tuner_addr     = ADDR_UNSET,
1350                .has_radio      = 1,
1351        },
1352        [BTTV_BOARD_GVBCTV4PCI] = {
1353                /* TANAKA Kei <peg00625@nifty.com> */
1354                .name           = "IODATA GV-BCTV4/PCI",
1355                .video_inputs   = 3,
1356                /* .audio_inputs= 1, */
1357                .svhs           = 2,
1358                .gpiomask       = 0x010f00,
1359                .muxsel         = MUXSEL(2, 3, 0, 0),
1360                .gpiomux        = {0x10000, 0, 0x10000, 0 },
1361                .no_msp34xx     = 1,
1362                .pll            = PLL_28,
1363                .tuner_type     = TUNER_SHARP_2U5JF5540_NTSC,
1364                .tuner_addr     = ADDR_UNSET,
1365                .audio_mode_gpio= gvbctv3pci_audio,
1366        },
1367
1368        /* ---- card 0x44 ---------------------------------- */
1369        [BTTV_BOARD_VOODOOTV_FM] = {
1370                .name           = "3Dfx VoodooTV FM (Euro)",
1371                /* try "insmod msp3400 simple=0" if you have
1372                * sound problems with this card. */
1373                .video_inputs   = 4,
1374                /* .audio_inputs= 1, */
1375                .svhs           = NO_SVHS,
1376                .gpiomask       = 0x4f8a00,
1377                /* 0x100000: 1=MSP enabled (0=disable again)
1378                * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1379                .gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1380                .gpiomute       = 0x947fff,
1381                /* tvtuner, radio,   external,internal, mute,  stereo
1382                * tuner, Composite, SVid, Composite-on-Svid-adapter */
1383                .muxsel         = MUXSEL(2, 3, 0, 1),
1384                .tuner_type     = TUNER_MT2032,
1385                .tuner_addr     = ADDR_UNSET,
1386                .pll            = PLL_28,
1387                .has_radio      = 1,
1388        },
1389        [BTTV_BOARD_VOODOOTV_200] = {
1390                .name           = "VoodooTV 200 (USA)",
1391                /* try "insmod msp3400 simple=0" if you have
1392                * sound problems with this card. */
1393                .video_inputs   = 4,
1394                /* .audio_inputs= 1, */
1395                .svhs           = NO_SVHS,
1396                .gpiomask       = 0x4f8a00,
1397                /* 0x100000: 1=MSP enabled (0=disable again)
1398                * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1399                .gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1400                .gpiomute       = 0x947fff,
1401                /* tvtuner, radio,   external,internal, mute,  stereo
1402                * tuner, Composite, SVid, Composite-on-Svid-adapter */
1403                .muxsel         = MUXSEL(2, 3, 0, 1),
1404                .tuner_type     = TUNER_MT2032,
1405                .tuner_addr     = ADDR_UNSET,
1406                .pll            = PLL_28,
1407                .has_radio      = 1,
1408        },
1409        [BTTV_BOARD_AIMMS] = {
1410                /* Philip Blundell <pb@nexus.co.uk> */
1411                .name           = "Active Imaging AIMMS",
1412                .video_inputs   = 1,
1413                /* .audio_inputs= 0, */
1414                .tuner_type     = TUNER_ABSENT,
1415                .tuner_addr     = ADDR_UNSET,
1416                .pll            = PLL_28,
1417                .muxsel         = MUXSEL(2),
1418                .gpiomask       = 0
1419        },
1420        [BTTV_BOARD_PV_BT878P_PLUS] = {
1421                /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1422                .name           = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1423                .video_inputs   = 3,
1424                /* .audio_inputs= 4, */
1425                .svhs           = 2,
1426                .gpiomask       = 15,
1427                .muxsel         = MUXSEL(2, 3, 1, 1),
1428                .gpiomux        = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1429                .gpiomute       = 13,
1430                .pll            = PLL_28,
1431                .tuner_type     = TUNER_LG_PAL_I_FM,
1432                .tuner_addr     = ADDR_UNSET,
1433                .has_remote     = 1,
1434                /* GPIO wiring:
1435                        GPIO0: U4.A0 (hef4052bt)
1436                        GPIO1: U4.A1
1437                        GPIO2: U4.A1 (second hef4052bt)
1438                        GPIO3: U4.nEN, U5.A0, A5.nEN
1439                        GPIO8-15: vrd866b ?
1440                */
1441        },
1442        [BTTV_BOARD_FLYVIDEO98EZ] = {
1443                .name           = "Lifeview FlyVideo 98EZ (capture only) LR51",
1444                .video_inputs   = 4,
1445                /* .audio_inputs= 0, */
1446                .svhs           = 2,
1447                /* AV1, AV2, SVHS, CVid adapter on SVHS */
1448                .muxsel         = MUXSEL(2, 3, 1, 1),
1449                .pll            = PLL_28,
1450                .no_msp34xx     = 1,
1451                .tuner_type     = TUNER_ABSENT,
1452                .tuner_addr     = ADDR_UNSET,
1453        },
1454
1455        /* ---- card 0x48 ---------------------------------- */
1456        [BTTV_BOARD_PV_BT878P_9B] = {
1457                /* Dariusz Kowalewski <darekk@automex.pl> */
1458                .name           = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1459                .video_inputs   = 4,
1460                /* .audio_inputs= 1, */
1461                .svhs           = 2,
1462                .gpiomask       = 0x3f,
1463                .muxsel         = MUXSEL(2, 3, 1, 1),
1464                .gpiomux        = { 0x01, 0x00, 0x03, 0x03 },
1465                .gpiomute       = 0x09,
1466                .no_msp34xx     = 1,
1467                .pll            = PLL_28,
1468                .tuner_type     = TUNER_PHILIPS_PAL,
1469                .tuner_addr     = ADDR_UNSET,
1470                .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */
1471                .has_radio      = 1,  /* Note: not all cards have radio */
1472                .has_remote     = 1,
1473                /* GPIO wiring:
1474                        GPIO0: A0 hef4052
1475                        GPIO1: A1 hef4052
1476                        GPIO3: nEN hef4052
1477                        GPIO8-15: vrd866b
1478                        GPIO20,22,23: R30,R29,R28
1479                */
1480        },
1481        [BTTV_BOARD_SENSORAY311_611] = {
1482                /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1483                /* you must jumper JP5 for the 311 card (PC/104+) to work */
1484                .name           = "Sensoray 311/611",
1485                .video_inputs   = 5,
1486                /* .audio_inputs= 0, */
1487                .svhs           = 4,
1488                .gpiomask       = 0,
1489                .muxsel         = MUXSEL(2, 3, 1, 0, 0),
1490                .gpiomux        = { 0 },
1491                .tuner_type     = TUNER_ABSENT,
1492                .tuner_addr     = ADDR_UNSET,
1493        },
1494        [BTTV_BOARD_RV605] = {
1495                /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1496                .name           = "RemoteVision MX (RV605)",
1497                .video_inputs   = 16,
1498                /* .audio_inputs= 0, */
1499                .svhs           = NO_SVHS,
1500                .gpiomask       = 0x00,
1501                .gpiomask2      = 0x07ff,
1502                .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
1503                .no_msp34xx     = 1,
1504                .tuner_type     = TUNER_ABSENT,
1505                .tuner_addr     = ADDR_UNSET,
1506                .muxsel_hook    = rv605_muxsel,
1507        },
1508        [BTTV_BOARD_POWERCLR_MTV878] = {
1509                .name           = "Powercolor MTV878/ MTV878R/ MTV878F",
1510                .video_inputs   = 3,
1511                /* .audio_inputs= 2, */
1512                .svhs           = 2,
1513                .gpiomask       = 0x1C800F,  /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1514                .muxsel         = MUXSEL(2, 1, 1),
1515                .gpiomux        = { 0, 1, 2, 2 },
1516                .gpiomute       = 4,
1517                .tuner_type     = TUNER_PHILIPS_PAL,
1518                .tuner_addr     = ADDR_UNSET,
1519                .pll            = PLL_28,
1520                .has_radio      = 1,
1521        },
1522
1523        /* ---- card 0x4c ---------------------------------- */
1524        [BTTV_BOARD_WINDVR] = {
1525                /* Masaki Suzuki <masaki@btree.org> */
1526                .name           = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1527                .video_inputs   = 3,
1528                /* .audio_inputs= 1, */
1529                .svhs           = 2,
1530                .gpiomask       = 0x140007,
1531                .muxsel         = MUXSEL(2, 3, 1, 1),
1532                .gpiomux        = { 0, 1, 2, 3 },
1533                .gpiomute       = 4,
1534                .tuner_type     = TUNER_PHILIPS_NTSC,
1535                .tuner_addr     = ADDR_UNSET,
1536                .audio_mode_gpio= windvr_audio,
1537        },
1538        [BTTV_BOARD_GRANDTEC_MULTI] = {
1539                .name           = "GrandTec Multi Capture Card (Bt878)",
1540                .video_inputs   = 4,
1541                /* .audio_inputs= 0, */
1542                .svhs           = NO_SVHS,
1543                .gpiomask       = 0,
1544                .muxsel         = MUXSEL(2, 3, 1, 0),
1545                .gpiomux        = { 0 },
1546                .no_msp34xx     = 1,
1547                .pll            = PLL_28,
1548                .tuner_type     = TUNER_ABSENT,
1549                .tuner_addr     = ADDR_UNSET,
1550        },
1551        [BTTV_BOARD_KWORLD] = {
1552                .name           = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1553                .video_inputs   = 4,
1554                /* .audio_inputs= 3, */
1555                .svhs           = 2,
1556                .gpiomask       = 7,
1557                /* Tuner, SVid, SVHS, SVid to SVHS connector */
1558                .muxsel         = MUXSEL(2, 3, 1, 1),
1559                .gpiomux        = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1560                                                * This card lacks external Audio In, so we mute it on Ext. & Int.
1561                                                * The PCB can take a sbx1637/sbx1673, wiring unknown.
1562                                                * This card lacks PCI subsystem ID, sigh.
1563                                                * gpiomux =1: lower volume, 2+3: mute
1564                                                * btwincap uses 0x80000/0x80003
1565                                                */
1566                .gpiomute       = 4,
1567                .no_msp34xx     = 1,
1568                .pll            = PLL_28,
1569                .tuner_type     = TUNER_PHILIPS_PAL,
1570                .tuner_addr     = ADDR_UNSET,
1571                /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1572                radio signal strength indicators work fine. */
1573                .has_radio      = 1,
1574                /* GPIO Info:
1575                        GPIO0,1:   HEF4052 A0,A1
1576                        GPIO2:     HEF4052 nENABLE
1577                        GPIO3-7:   n.c.
1578                        GPIO8-13:  IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1579                        GPIO14,15: ??
1580                        GPIO16-21: n.c.
1581                        GPIO22,23: ??
1582                        ??       : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1583        },
1584        [BTTV_BOARD_DSP_TCVIDEO] = {
1585                /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1586                .name           = "DSP Design TCVIDEO",
1587                .video_inputs   = 4,
1588                .svhs           = NO_SVHS,
1589                .muxsel         = MUXSEL(2, 3, 1, 0),
1590                .pll            = PLL_28,
1591                .tuner_type     = UNSET,
1592                .tuner_addr     = ADDR_UNSET,
1593        },
1594
1595                /* ---- card 0x50 ---------------------------------- */
1596        [BTTV_BOARD_HAUPPAUGEPVR] = {
1597                .name           = "Hauppauge WinTV PVR",
1598                .video_inputs   = 4,
1599                /* .audio_inputs= 1, */
1600                .svhs           = 2,
1601                .muxsel         = MUXSEL(2, 0, 1, 1),
1602                .pll            = PLL_28,
1603                .tuner_type     = UNSET,
1604                .tuner_addr     = ADDR_UNSET,
1605
1606                .gpiomask       = 7,
1607                .gpiomux        = {7},
1608        },
1609        [BTTV_BOARD_GVBCTV5PCI] = {
1610                .name           = "IODATA GV-BCTV5/PCI",
1611                .video_inputs   = 3,
1612                /* .audio_inputs= 1, */
1613                .svhs           = 2,
1614                .gpiomask       = 0x0f0f80,
1615                .muxsel         = MUXSEL(2, 3, 1, 0),
1616                .gpiomux        = {0x030000, 0x010000, 0, 0 },
1617                .gpiomute       = 0x020000,
1618                .no_msp34xx     = 1,
1619                .pll            = PLL_28,
1620                .tuner_type     = TUNER_PHILIPS_NTSC_M,
1621                .tuner_addr     = ADDR_UNSET,
1622                .audio_mode_gpio= gvbctv5pci_audio,
1623                .has_radio      = 1,
1624        },
1625        [BTTV_BOARD_OSPREY1x0] = {
1626                .name           = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1627                .video_inputs   = 4,                  /* id-inputs-clock */
1628                /* .audio_inputs= 0, */
1629                .svhs           = 3,
1630                .muxsel         = MUXSEL(3, 2, 0, 1),
1631                .pll            = PLL_28,
1632                .tuner_type     = TUNER_ABSENT,
1633                .tuner_addr     = ADDR_UNSET,
1634                .no_msp34xx     = 1,
1635                .no_tda7432     = 1,
1636        },
1637        [BTTV_BOARD_OSPREY1x0_848] = {
1638                .name           = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1639                .video_inputs   = 3,
1640                /* .audio_inputs= 0, */
1641                .svhs           = 2,
1642                .muxsel         = MUXSEL(2, 3, 1),
1643                .pll            = PLL_28,
1644                .tuner_type     = TUNER_ABSENT,
1645                .tuner_addr     = ADDR_UNSET,
1646                .no_msp34xx     = 1,
1647                .no_tda7432     = 1,
1648        },
1649
1650                /* ---- card 0x54 ---------------------------------- */
1651        [BTTV_BOARD_OSPREY101_848] = {
1652                .name           = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1653                .video_inputs   = 2,
1654                /* .audio_inputs= 0, */
1655                .svhs           = 1,
1656                .muxsel         = MUXSEL(3, 1),
1657                .pll            = PLL_28,
1658                .tuner_type     = TUNER_ABSENT,
1659                .tuner_addr     = ADDR_UNSET,
1660                .no_msp34xx     = 1,
1661                .no_tda7432     = 1,
1662        },
1663        [BTTV_BOARD_OSPREY1x1] = {
1664                .name           = "Osprey 101/151",       /* 0x1(4|5)-0004-C4 */
1665                .video_inputs   = 1,
1666                /* .audio_inputs= 0, */
1667                .svhs           = NO_SVHS,
1668                .muxsel         = MUXSEL(0),
1669                .pll            = PLL_28,
1670                .tuner_type     = TUNER_ABSENT,
1671                .tuner_addr     = ADDR_UNSET,
1672                .no_msp34xx     = 1,
1673                .no_tda7432     = 1,
1674        },
1675        [BTTV_BOARD_OSPREY1x1_SVID] = {
1676                .name           = "Osprey 101/151 w/ svid",  /* 0x(16|17|20)-00C4-C1 */
1677                .video_inputs   = 2,
1678                /* .audio_inputs= 0, */
1679                .svhs           = 1,
1680                .muxsel         = MUXSEL(0, 1),
1681                .pll            = PLL_28,
1682                .tuner_type     = TUNER_ABSENT,
1683                .tuner_addr     = ADDR_UNSET,
1684                .no_msp34xx     = 1,
1685                .no_tda7432     = 1,
1686        },
1687        [BTTV_BOARD_OSPREY2xx] = {
1688                .name           = "Osprey 200/201/250/251",  /* 0x1(8|9|E|F)-0004-C4 */
1689                .video_inputs   = 1,
1690                /* .audio_inputs= 1, */
1691                .svhs           = NO_SVHS,
1692                .muxsel         = MUXSEL(0),
1693                .pll            = PLL_28,
1694                .tuner_type     = TUNER_ABSENT,
1695                .tuner_addr     = ADDR_UNSET,
1696                .no_msp34xx     = 1,
1697                .no_tda7432     = 1,
1698        },
1699
1700                /* ---- card 0x58 ---------------------------------- */
1701        [BTTV_BOARD_OSPREY2x0_SVID] = {
1702                .name           = "Osprey 200/250",   /* 0x1(A|B)-00C4-C1 */
1703                .video_inputs   = 2,
1704                /* .audio_inputs= 1, */
1705                .svhs           = 1,
1706                .muxsel         = MUXSEL(0, 1),
1707                .pll            = PLL_28,
1708                .tuner_type     = TUNER_ABSENT,
1709                .tuner_addr     = ADDR_UNSET,
1710                .no_msp34xx     = 1,
1711                .no_tda7432     = 1,
1712        },
1713        [BTTV_BOARD_OSPREY2x0] = {
1714                .name           = "Osprey 210/220/230",   /* 0x1(A|B)-04C0-C1 */
1715                .video_inputs   = 2,
1716                /* .audio_inputs= 1, */
1717                .svhs           = 1,
1718                .muxsel         = MUXSEL(2, 3),
1719                .pll            = PLL_28,
1720                .tuner_type     = TUNER_ABSENT,
1721                .tuner_addr     = ADDR_UNSET,
1722                .no_msp34xx     = 1,
1723                .no_tda7432     = 1,
1724        },
1725        [BTTV_BOARD_OSPREY500] = {
1726                .name           = "Osprey 500",   /* 500 */
1727                .video_inputs   = 2,
1728                /* .audio_inputs= 1, */
1729                .svhs           = 1,
1730                .muxsel         = MUXSEL(2, 3),
1731                .pll            = PLL_28,
1732                .tuner_type     = TUNER_ABSENT,
1733                .tuner_addr     = ADDR_UNSET,
1734                .no_msp34xx     = 1,
1735                .no_tda7432     = 1,
1736        },
1737        [BTTV_BOARD_OSPREY540] = {
1738                .name           = "Osprey 540",   /* 540 */
1739                .video_inputs   = 4,
1740                /* .audio_inputs= 1, */
1741                .pll            = PLL_28,
1742                .tuner_type     = TUNER_ABSENT,
1743                .tuner_addr     = ADDR_UNSET,
1744                .no_msp34xx     = 1,
1745                .no_tda7432     = 1,
1746        },
1747
1748                /* ---- card 0x5C ---------------------------------- */
1749        [BTTV_BOARD_OSPREY2000] = {
1750                .name           = "Osprey 2000",  /* 2000 */
1751                .video_inputs   = 2,
1752                /* .audio_inputs= 1, */
1753                .svhs           = 1,
1754                .muxsel         = MUXSEL(2, 3),
1755                .pll            = PLL_28,
1756                .tuner_type     = TUNER_ABSENT,
1757                .tuner_addr     = ADDR_UNSET,
1758                .no_msp34xx     = 1,
1759                .no_tda7432     = 1,      /* must avoid, conflicts with the bt860 */
1760        },
1761        [BTTV_BOARD_IDS_EAGLE] = {
1762                /* M G Berberich <berberic@forwiss.uni-passau.de> */
1763                .name           = "IDS Eagle",
1764                .video_inputs   = 4,
1765                /* .audio_inputs= 0, */
1766                .tuner_type     = TUNER_ABSENT,
1767                .tuner_addr     = ADDR_UNSET,
1768                .svhs           = NO_SVHS,
1769                .gpiomask       = 0,
1770                .muxsel         = MUXSEL(2, 2, 2, 2),
1771                .muxsel_hook    = eagle_muxsel,
1772                .no_msp34xx     = 1,
1773                .pll            = PLL_28,
1774        },
1775        [BTTV_BOARD_PINNACLESAT] = {
1776                .name           = "Pinnacle PCTV Sat",
1777                .video_inputs   = 2,
1778                /* .audio_inputs= 0, */
1779                .svhs           = 1,
1780                .tuner_type     = TUNER_ABSENT,
1781                .tuner_addr     = ADDR_UNSET,
1782                .no_msp34xx     = 1,
1783                .no_tda7432     = 1,
1784                .muxsel         = MUXSEL(3, 1),
1785                .pll            = PLL_28,
1786                .no_gpioirq     = 1,
1787                .has_dvb        = 1,
1788        },
1789        [BTTV_BOARD_FORMAC_PROTV] = {
1790                .name           = "Formac ProTV II (bt878)",
1791                .video_inputs   = 4,
1792                /* .audio_inputs= 1, */
1793                .svhs           = 3,
1794                .gpiomask       = 2,
1795                /* TV, Comp1, Composite over SVID con, SVID */
1796                .muxsel         = MUXSEL(2, 3, 1, 1),
1797                .gpiomux        = { 2, 2, 0, 0 },
1798                .pll            = PLL_28,
1799                .has_radio      = 1,
1800                .tuner_type     = TUNER_PHILIPS_PAL,
1801                .tuner_addr     = ADDR_UNSET,
1802        /* sound routing:
1803                GPIO=0x00,0x01,0x03: mute (?)
1804                0x02: both TV and radio (tuner: FM1216/I)
1805                The card has onboard audio connectors labeled "cdrom" and "board",
1806                not soldered here, though unknown wiring.
1807                Card lacks: external audio in, pci subsystem id.
1808        */
1809        },
1810
1811                /* ---- card 0x60 ---------------------------------- */
1812        [BTTV_BOARD_MACHTV] = {
1813                .name           = "MachTV",
1814                .video_inputs   = 3,
1815                /* .audio_inputs= 1, */
1816                .svhs           = NO_SVHS,
1817                .gpiomask       = 7,
1818                .muxsel         = MUXSEL(2, 3, 1, 1),
1819                .gpiomux        = { 0, 1, 2, 3},
1820                .gpiomute       = 4,
1821                .tuner_type     = TUNER_PHILIPS_PAL,
1822                .tuner_addr     = ADDR_UNSET,
1823                .pll            = PLL_28,
1824        },
1825        [BTTV_BOARD_EURESYS_PICOLO] = {
1826                .name           = "Euresys Picolo",
1827                .video_inputs   = 3,
1828                /* .audio_inputs= 0, */
1829                .svhs           = 2,
1830                .gpiomask       = 0,
1831                .no_msp34xx     = 1,
1832                .no_tda7432     = 1,
1833                .muxsel         = MUXSEL(2, 0, 1),
1834                .pll            = PLL_28,
1835                .tuner_type     = TUNER_ABSENT,
1836                .tuner_addr     = ADDR_UNSET,
1837        },
1838        [BTTV_BOARD_PV150] = {
1839                /* Luc Van Hoeylandt <luc@e-magic.be> */
1840                .name           = "ProVideo PV150", /* 0x4f */
1841                .video_inputs   = 2,
1842                /* .audio_inputs= 0, */
1843                .svhs           = NO_SVHS,
1844                .gpiomask       = 0,
1845                .muxsel         = MUXSEL(2, 3),
1846                .gpiomux        = { 0 },
1847                .no_msp34xx     = 1,
1848                .pll            = PLL_28,
1849                .tuner_type     = TUNER_ABSENT,
1850                .tuner_addr     = ADDR_UNSET,
1851        },
1852        [BTTV_BOARD_AD_TVK503] = {
1853                /* Hiroshi Takekawa <sian@big.or.jp> */
1854                /* This card lacks subsystem ID */
1855                .name           = "AD-TVK503", /* 0x63 */
1856                .video_inputs   = 4,
1857                /* .audio_inputs= 1, */
1858                .svhs           = 2,
1859                .gpiomask       = 0x001e8007,
1860                .muxsel         = MUXSEL(2, 3, 1, 0),
1861                /*                  Tuner, Radio, external, internal, off,  on */
1862                .gpiomux        = { 0x08,  0x0f,  0x0a,     0x08 },
1863                .gpiomute       = 0x0f,
1864                .no_msp34xx     = 1,
1865                .pll            = PLL_28,
1866                .tuner_type     = TUNER_PHILIPS_NTSC,
1867                .tuner_addr     = ADDR_UNSET,
1868                .audio_mode_gpio= adtvk503_audio,
1869        },
1870
1871                /* ---- card 0x64 ---------------------------------- */
1872        [BTTV_BOARD_HERCULES_SM_TV] = {
1873                .name           = "Hercules Smart TV Stereo",
1874                .video_inputs   = 4,
1875                /* .audio_inputs= 1, */
1876                .svhs           = 2,
1877                .gpiomask       = 0x00,
1878                .muxsel         = MUXSEL(2, 3, 1, 1),
1879                .no_msp34xx     = 1,
1880                .pll            = PLL_28,
1881                .tuner_type     = TUNER_PHILIPS_PAL,
1882                .tuner_addr     = ADDR_UNSET,
1883                /* Notes:
1884                - card lacks subsystem ID
1885                - stereo variant w/ daughter board with tda9874a @0xb0
1886                - Audio Routing:
1887                        always from tda9874 independent of GPIO (?)
1888                        external line in: unknown
1889                - Other chips: em78p156elp @ 0x96 (probably IR remote control)
1890                        hef4053 (instead 4052) for unknown function
1891                */
1892        },
1893        [BTTV_BOARD_PACETV] = {
1894                .name           = "Pace TV & Radio Card",
1895                .video_inputs   = 4,
1896                /* .audio_inputs= 1, */
1897                .svhs           = 2,
1898                /* Tuner, CVid, SVid, CVid over SVid connector */
1899                .muxsel         = MUXSEL(2, 3, 1, 1),
1900                .gpiomask       = 0,
1901                .no_tda7432     = 1,
1902                .tuner_type     = TUNER_PHILIPS_PAL_I,
1903                .tuner_addr     = ADDR_UNSET,
1904                .has_radio      = 1,
1905                .pll            = PLL_28,
1906                /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
1907                only internal line out: (4pin header) RGGL
1908                Radio must be decoded by msp3410d (not routed through)*/
1909                /*
1910                .digital_mode   = DIGITAL_MODE_CAMERA,  todo!
1911                */
1912        },
1913        [BTTV_BOARD_IVC200] = {
1914                /* Chris Willing <chris@vislab.usyd.edu.au> */
1915                .name           = "IVC-200",
1916                .video_inputs   = 1,
1917                /* .audio_inputs= 0, */
1918                .tuner_type     = TUNER_ABSENT,
1919                .tuner_addr     = ADDR_UNSET,
1920                .svhs           = NO_SVHS,
1921                .gpiomask       = 0xdf,
1922                .muxsel         = MUXSEL(2),
1923                .pll            = PLL_28,
1924        },
1925        [BTTV_BOARD_IVCE8784] = {
1926                .name           = "IVCE-8784",
1927                .video_inputs   = 1,
1928                /* .audio_inputs= 0, */
1929                .tuner_type     = TUNER_ABSENT,
1930                .tuner_addr     = ADDR_UNSET,
1931                .svhs           = NO_SVHS,
1932                .gpiomask       = 0xdf,
1933                .muxsel         = MUXSEL(2),
1934                .pll            = PLL_28,
1935        },
1936        [BTTV_BOARD_XGUARD] = {
1937                .name           = "Grand X-Guard / Trust 814PCI",
1938                .video_inputs   = 16,
1939                /* .audio_inputs= 0, */
1940                .svhs           = NO_SVHS,
1941                .tuner_type     = TUNER_ABSENT,
1942                .tuner_addr     = ADDR_UNSET,
1943                .gpiomask2      = 0xff,
1944                .muxsel         = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0),
1945                .muxsel_hook    = xguard_muxsel,
1946                .no_msp34xx     = 1,
1947                .no_tda7432     = 1,
1948                .pll            = PLL_28,
1949        },
1950
1951                /* ---- card 0x68 ---------------------------------- */
1952        [BTTV_BOARD_NEBULA_DIGITV] = {
1953                .name           = "Nebula Electronics DigiTV",
1954                .video_inputs   = 1,
1955                .svhs           = NO_SVHS,
1956                .muxsel         = MUXSEL(2, 3, 1, 0),
1957                .no_msp34xx     = 1,
1958                .no_tda7432     = 1,
1959                .pll            = PLL_28,
1960                .tuner_type     = TUNER_ABSENT,
1961                .tuner_addr     = ADDR_UNSET,
1962                .has_dvb        = 1,
1963                .has_remote     = 1,
1964                .gpiomask       = 0x1b,
1965                .no_gpioirq     = 1,
1966        },
1967        [BTTV_BOARD_PV143] = {
1968                /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
1969                .name           = "ProVideo PV143",
1970                .video_inputs   = 4,
1971                /* .audio_inputs= 0, */
1972                .svhs           = NO_SVHS,
1973                .gpiomask       = 0,
1974                .muxsel         = MUXSEL(2, 3, 1, 0),
1975                .gpiomux        = { 0 },
1976                .no_msp34xx     = 1,
1977                .pll            = PLL_28,
1978                .tuner_type     = TUNER_ABSENT,
1979                .tuner_addr     = ADDR_UNSET,
1980        },
1981        [BTTV_BOARD_VD009X1_VD011_MINIDIN] = {
1982                /* M.Klahr@phytec.de */
1983                .name           = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)",
1984                .video_inputs   = 4,
1985                /* .audio_inputs= 0, */
1986                .svhs           = 3,
1987                .gpiomask       = 0x00,
1988                .muxsel         = MUXSEL(2, 3, 1, 0),
1989                .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
1990                .pll            = PLL_28,
1991                .tuner_type     = TUNER_ABSENT,
1992                .tuner_addr     = ADDR_UNSET,
1993        },
1994        [BTTV_BOARD_VD009X1_VD011_COMBI] = {
1995                .name           = "PHYTEC VD-009-X1 VD-011 Combi (bt878)",
1996                .video_inputs   = 4,
1997                /* .audio_inputs= 0, */
1998                .svhs           = 3,
1999                .gpiomask       = 0x00,
2000                .muxsel         = MUXSEL(2, 3, 1, 1),
2001                .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2002                .pll            = PLL_28,
2003                .tuner_type     = TUNER_ABSENT,
2004                .tuner_addr     = ADDR_UNSET,
2005        },
2006
2007                /* ---- card 0x6c ---------------------------------- */
2008        [BTTV_BOARD_VD009_MINIDIN] = {
2009                .name           = "PHYTEC VD-009 MiniDIN (bt878)",
2010                .video_inputs   = 10,
2011                /* .audio_inputs= 0, */
2012                .svhs           = 9,
2013                .gpiomask       = 0x00,
2014                .gpiomask2      = 0x03, /* used for external video mux */
2015                .muxsel         = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
2016                .muxsel_hook    = phytec_muxsel,
2017                .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2018                .pll            = PLL_28,
2019                .tuner_type     = TUNER_ABSENT,
2020                .tuner_addr     = ADDR_UNSET,
2021        },
2022        [BTTV_BOARD_VD009_COMBI] = {
2023                .name           = "PHYTEC VD-009 Combi (bt878)",
2024                .video_inputs   = 10,
2025                /* .audio_inputs= 0, */
2026                .svhs           = 9,
2027                .gpiomask       = 0x00,
2028                .gpiomask2      = 0x03, /* used for external video mux */
2029                .muxsel         = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
2030                .muxsel_hook    = phytec_muxsel,
2031                .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2032                .pll            = PLL_28,
2033                .tuner_type     = TUNER_ABSENT,
2034                .tuner_addr     = ADDR_UNSET,
2035        },
2036        [BTTV_BOARD_IVC100] = {
2037                .name           = "IVC-100",
2038                .video_inputs   = 4,
2039                /* .audio_inputs= 0, */
2040                .tuner_type     = TUNER_ABSENT,
2041                .tuner_addr     = ADDR_UNSET,
2042                .svhs           = NO_SVHS,
2043                .gpiomask       = 0xdf,
2044                .muxsel         = MUXSEL(2, 3, 1, 0),
2045                .pll            = PLL_28,
2046        },
2047        [BTTV_BOARD_IVC120] = {
2048                /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2049                .name           = "IVC-120G",
2050                .video_inputs   = 16,
2051                /* .audio_inputs= 0, */
2052                .tuner_type     = TUNER_ABSENT,
2053                .tuner_addr     = ADDR_UNSET,
2054                .svhs           = NO_SVHS,   /* card has no svhs */
2055                .no_msp34xx     = 1,
2056                .no_tda7432     = 1,
2057                .gpiomask       = 0x00,
2058                .muxsel         = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0),
2059                .muxsel_hook    = ivc120_muxsel,
2060                .pll            = PLL_28,
2061        },
2062
2063                /* ---- card 0x70 ---------------------------------- */
2064        [BTTV_BOARD_PC_HDTV] = {
2065                .name           = "pcHDTV HD-2000 TV",
2066                .video_inputs   = 4,
2067                /* .audio_inputs= 1, */
2068                .svhs           = 2,
2069                .muxsel         = MUXSEL(2, 3, 1, 0),
2070                .tuner_type     = TUNER_PHILIPS_FCV1236D,
2071                .tuner_addr     = ADDR_UNSET,
2072                .has_dvb        = 1,
2073        },
2074        [BTTV_BOARD_TWINHAN_DST] = {
2075                .name           = "Twinhan DST + clones",
2076                .no_msp34xx     = 1,
2077                .no_tda7432     = 1,
2078                .tuner_type     = TUNER_ABSENT,
2079                .tuner_addr     = ADDR_UNSET,
2080                .no_video       = 1,
2081                .has_dvb        = 1,
2082        },
2083        [BTTV_BOARD_WINFASTVC100] = {
2084                .name           = "Winfast VC100",
2085                .video_inputs   = 3,
2086                /* .audio_inputs= 0, */
2087                .svhs           = 1,
2088                /* Vid In, SVid In, Vid over SVid in connector */
2089                .muxsel         = MUXSEL(3, 1, 1, 3),
2090                .no_msp34xx     = 1,
2091                .no_tda7432     = 1,
2092                .tuner_type     = TUNER_ABSENT,
2093                .tuner_addr     = ADDR_UNSET,
2094                .pll            = PLL_28,
2095        },
2096        [BTTV_BOARD_TEV560] = {
2097                .name           = "Teppro TEV-560/InterVision IV-560",
2098                .video_inputs   = 3,
2099                /* .audio_inputs= 1, */
2100                .svhs           = 2,
2101                .gpiomask       = 3,
2102                .muxsel         = MUXSEL(2, 3, 1, 1),
2103                .gpiomux        = { 1, 1, 1, 1 },
2104                .tuner_type     = TUNER_PHILIPS_PAL,
2105                .tuner_addr     = ADDR_UNSET,
2106                .pll            = PLL_35,
2107        },
2108
2109                /* ---- card 0x74 ---------------------------------- */
2110        [BTTV_BOARD_SIMUS_GVC1100] = {
2111                .name           = "SIMUS GVC1100",
2112                .video_inputs   = 4,
2113                /* .audio_inputs= 0, */
2114                .svhs           = NO_SVHS,
2115                .tuner_type     = TUNER_ABSENT,
2116                .tuner_addr     = ADDR_UNSET,
2117                .pll            = PLL_28,
2118                .muxsel         = MUXSEL(2, 2, 2, 2),
2119                .gpiomask       = 0x3F,
2120                .muxsel_hook    = gvc1100_muxsel,
2121        },
2122        [BTTV_BOARD_NGSTV_PLUS] = {
2123                /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2124                .name           = "NGS NGSTV+",
2125                .video_inputs   = 3,
2126                .svhs           = 2,
2127                .gpiomask       = 0x008007,
2128                .muxsel         = MUXSEL(2, 3, 0, 0),
2129                .gpiomux        = { 0, 0, 0, 0 },
2130                .gpiomute       = 0x000003,
2131                .pll            = PLL_28,
2132                .tuner_type     = TUNER_PHILIPS_PAL,
2133                .tuner_addr     = ADDR_UNSET,
2134                .has_remote     = 1,
2135        },
2136        [BTTV_BOARD_LMLBT4] = {
2137                /* http://linuxmedialabs.com */
2138                .name           = "LMLBT4",
2139                .video_inputs   = 4, /* IN1,IN2,IN3,IN4 */
2140                /* .audio_inputs= 0, */
2141                .svhs           = NO_SVHS,
2142                .muxsel         = MUXSEL(2, 3, 1, 0),
2143                .no_msp34xx     = 1,
2144                .no_tda7432     = 1,
2145                .tuner_type     = TUNER_ABSENT,
2146                .tuner_addr     = ADDR_UNSET,
2147        },
2148        [BTTV_BOARD_TEKRAM_M205] = {
2149                /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2150                .name           = "Tekram M205 PRO",
2151                .video_inputs   = 3,
2152                /* .audio_inputs= 1, */
2153                .tuner_type     = TUNER_PHILIPS_PAL,
2154                .tuner_addr     = ADDR_UNSET,
2155                .svhs           = 2,
2156                .gpiomask       = 0x68,
2157                .muxsel         = MUXSEL(2, 3, 1),
2158                .gpiomux        = { 0x68, 0x68, 0x61, 0x61 },
2159                .pll            = PLL_28,
2160        },
2161
2162                /* ---- card 0x78 ---------------------------------- */
2163        [BTTV_BOARD_CONTVFMI] = {
2164                /* Javier Cendan Ares <jcendan@lycos.es> */
2165                /* bt878 TV + FM without subsystem ID */
2166                .name           = "Conceptronic CONTVFMi",
2167                .video_inputs   = 3,
2168                /* .audio_inputs= 1, */
2169                .svhs           = 2,
2170                .gpiomask       = 0x008007,
2171                .muxsel         = MUXSEL(2, 3, 1, 1),
2172                .gpiomux        = { 0, 1, 2, 2 },
2173                .gpiomute       = 3,
2174                .pll            = PLL_28,
2175                .tuner_type     = TUNER_PHILIPS_PAL,
2176                .tuner_addr     = ADDR_UNSET,
2177                .has_remote     = 1,
2178                .has_radio      = 1,
2179        },
2180        [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2181                /*Eric DEBIEF <debief@telemsa.com>*/
2182                /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controlled*/
2183                /*adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration*/
2184                /*structure and #define BTTV_BOARD_PICOLO_TETRA_CHIP 0x79 in bttv.h*/
2185                .name           = "Euresys Picolo Tetra",
2186                .video_inputs   = 4,
2187                /* .audio_inputs= 0, */
2188                .svhs           = NO_SVHS,
2189                .gpiomask       = 0,
2190                .gpiomask2      = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2191                .no_msp34xx     = 1,
2192                .no_tda7432     = 1,
2193                /*878A input is always MUX0, see above.*/
2194                .muxsel         = MUXSEL(2, 2, 2, 2),
2195                .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2196                .pll            = PLL_28,
2197                .muxsel_hook    = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2198                .tuner_type     = TUNER_ABSENT,
2199                .tuner_addr     = ADDR_UNSET,
2200        },
2201        [BTTV_BOARD_SPIRIT_TV] = {
2202                /* Spirit TV Tuner from http://spiritmodems.com.au */
2203                /* Stafford Goodsell <surge@goliath.homeunix.org> */
2204                .name           = "Spirit TV Tuner",
2205                .video_inputs   = 3,
2206                /* .audio_inputs= 1, */
2207                .svhs           = 2,
2208                .gpiomask       = 0x0000000f,
2209                .muxsel         = MUXSEL(2, 1, 1),
2210                .gpiomux        = { 0x02, 0x00, 0x00, 0x00 },
2211                .tuner_type     = TUNER_TEMIC_PAL,
2212                .tuner_addr     = ADDR_UNSET,
2213                .no_msp34xx     = 1,
2214        },
2215        [BTTV_BOARD_AVDVBT_771] = {
2216                /* Wolfram Joost <wojo@frokaschwei.de> */
2217                .name           = "AVerMedia AVerTV DVB-T 771",
2218                .video_inputs   = 2,
2219                .svhs           = 1,
2220                .tuner_type     = TUNER_ABSENT,
2221                .tuner_addr     = ADDR_UNSET,
2222                .muxsel         = MUXSEL(3, 3),
2223                .no_msp34xx     = 1,
2224                .no_tda7432     = 1,
2225                .pll            = PLL_28,
2226                .has_dvb        = 1,
2227                .no_gpioirq     = 1,
2228                .has_remote     = 1,
2229        },
2230                /* ---- card 0x7c ---------------------------------- */
2231        [BTTV_BOARD_AVDVBT_761] = {
2232                /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2233                /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2234                .name           = "AverMedia AverTV DVB-T 761",
2235                .video_inputs   = 2,
2236                .svhs           = 1,
2237                .muxsel         = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */
2238                .no_msp34xx     = 1,
2239                .no_tda7432     = 1,
2240                .pll            = PLL_28,
2241                .tuner_type     = TUNER_ABSENT,
2242                .tuner_addr     = ADDR_UNSET,
2243                .has_dvb        = 1,
2244                .no_gpioirq     = 1,
2245                .has_remote     = 1,
2246        },
2247        [BTTV_BOARD_MATRIX_VISIONSQ] = {
2248                /* andre.schwarz@matrix-vision.de */
2249                .name           = "MATRIX Vision Sigma-SQ",
2250                .video_inputs   = 16,
2251                /* .audio_inputs= 0, */
2252                .svhs           = NO_SVHS,
2253                .gpiomask       = 0x0,
2254                .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3),
2255                .muxsel_hook    = sigmaSQ_muxsel,
2256                .gpiomux        = { 0 },
2257                .no_msp34xx     = 1,
2258                .pll            = PLL_28,
2259                .tuner_type     = TUNER_ABSENT,
2260                .tuner_addr     = ADDR_UNSET,
2261        },
2262        [BTTV_BOARD_MATRIX_VISIONSLC] = {
2263                /* andre.schwarz@matrix-vision.de */
2264                .name           = "MATRIX Vision Sigma-SLC",
2265                .video_inputs   = 4,
2266                /* .audio_inputs= 0, */
2267                .svhs           = NO_SVHS,
2268                .gpiomask       = 0x0,
2269                .muxsel         = MUXSEL(2, 2, 2, 2),
2270                .muxsel_hook    = sigmaSLC_muxsel,
2271                .gpiomux        = { 0 },
2272                .no_msp34xx     = 1,
2273                .pll            = PLL_28,
2274                .tuner_type     = TUNER_ABSENT,
2275                .tuner_addr     = ADDR_UNSET,
2276        },
2277                /* BTTV_BOARD_APAC_VIEWCOMP */
2278        [BTTV_BOARD_APAC_VIEWCOMP] = {
2279                /* Attila Kondoros <attila.kondoros@chello.hu> */
2280                /* bt878 TV + FM 0x00000000 subsystem ID */
2281                .name           = "APAC Viewcomp 878(AMAX)",
2282                .video_inputs   = 2,
2283                /* .audio_inputs= 1, */
2284                .svhs           = NO_SVHS,
2285                .gpiomask       = 0xFF,
2286                .muxsel         = MUXSEL(2, 3, 1, 1),
2287                .gpiomux        = { 2, 0, 0, 0 },
2288                .gpiomute       = 10,
2289                .pll            = PLL_28,
2290                .tuner_type     = TUNER_PHILIPS_PAL,
2291                .tuner_addr     = ADDR_UNSET,
2292                .has_remote     = 1,   /* miniremote works, see ir-kbd-gpio.c */
2293                .has_radio      = 1,   /* not every card has radio */
2294        },
2295
2296                /* ---- card 0x80 ---------------------------------- */
2297        [BTTV_BOARD_DVICO_DVBT_LITE] = {
2298                /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2299                .name           = "DViCO FusionHDTV DVB-T Lite",
2300                .no_msp34xx     = 1,
2301                .no_tda7432     = 1,
2302                .pll            = PLL_28,
2303                .no_video       = 1,
2304                .has_dvb        = 1,
2305                .tuner_type     = TUNER_ABSENT,
2306                .tuner_addr     = ADDR_UNSET,
2307        },
2308        [BTTV_BOARD_VGEAR_MYVCD] = {
2309                /* Steven <photon38@pchome.com.tw> */
2310                .name           = "V-Gear MyVCD",
2311                .video_inputs   = 3,
2312                /* .audio_inputs= 1, */
2313                .svhs           = 2,
2314                .gpiomask       = 0x3f,
2315                .muxsel         = MUXSEL(2, 3, 1, 0),
2316                .gpiomux        = {0x31, 0x31, 0x31, 0x31 },
2317                .gpiomute       = 0x31,
2318                .no_msp34xx     = 1,
2319                .pll            = PLL_28,
2320                .tuner_type     = TUNER_PHILIPS_NTSC_M,
2321                .tuner_addr     = ADDR_UNSET,
2322                .has_radio      = 0,
2323        },
2324        [BTTV_BOARD_SUPER_TV] = {
2325                /* Rick C <cryptdragoon@gmail.com> */
2326                .name           = "Super TV Tuner",
2327                .video_inputs   = 4,
2328                /* .audio_inputs= 1, */
2329                .svhs           = 2,
2330                .muxsel         = MUXSEL(2, 3, 1, 0),
2331                .tuner_type     = TUNER_PHILIPS_NTSC,
2332                .tuner_addr     = ADDR_UNSET,
2333                .gpiomask       = 0x008007,
2334                .gpiomux        = { 0, 0x000001,0,0 },
2335                .has_radio      = 1,
2336        },
2337        [BTTV_BOARD_TIBET_CS16] = {
2338                /* Chris Fanning <video4linux@haydon.net> */
2339                .name           = "Tibet Systems 'Progress DVR' CS16",
2340                .video_inputs   = 16,
2341                /* .audio_inputs= 0, */
2342                .svhs           = NO_SVHS,
2343                .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2344                .pll            = PLL_28,
2345                .no_msp34xx     = 1,
2346                .no_tda7432     = 1,
2347                .tuner_type     = TUNER_ABSENT,
2348                .tuner_addr     = ADDR_UNSET,
2349                .muxsel_hook    = tibetCS16_muxsel,
2350        },
2351        [BTTV_BOARD_KODICOM_4400R] = {
2352                /* Bill Brack <wbrack@mmm.com.hk> */
2353                /*
2354                * Note that, because of the card's wiring, the "master"
2355                * BT878A chip (i.e. the one which controls the analog switch
2356                * and must use this card type) is the 2nd one detected.  The
2357                * other 3 chips should use card type 0x85, whose description
2358                * follows this one.  There is a EEPROM on the card (which is
2359                * connected to the I2C of one of those other chips), but is
2360                * not currently handled.  There is also a facility for a
2361                * "monitor", which is also not currently implemented.
2362                */
2363                .name           = "Kodicom 4400R (master)",
2364                .video_inputs   = 16,
2365                /* .audio_inputs= 0, */
2366                .tuner_type     = TUNER_ABSENT,
2367                .tuner_addr     = ADDR_UNSET,
2368                .svhs           = NO_SVHS,
2369                /* GPIO bits 0-9 used for analog switch:
2370                *   00 - 03:    camera selector
2371                *   04 - 06:    channel (controller) selector
2372                *   07: data (1->on, 0->off)
2373                *   08: strobe
2374                *   09: reset
2375                * bit 16 is input from sync separator for the channel
2376                */
2377                .gpiomask       = 0x0003ff,
2378                .no_gpioirq     = 1,
2379                .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2380                .pll            = PLL_28,
2381                .no_msp34xx     = 1,
2382                .no_tda7432     = 1,
2383                .muxsel_hook    = kodicom4400r_muxsel,
2384        },
2385        [BTTV_BOARD_KODICOM_4400R_SL] = {
2386                /* Bill Brack <wbrack@mmm.com.hk> */
2387                /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2388                * one which controls the analog switch, and must use the card type)
2389                * is the 2nd one detected.  The other 3 chips should use this card
2390                * type
2391                */
2392                .name           = "Kodicom 4400R (slave)",
2393                .video_inputs   = 16,
2394                /* .audio_inputs= 0, */
2395                .tuner_type     = TUNER_ABSENT,
2396                .tuner_addr     = ADDR_UNSET,
2397                .svhs           = NO_SVHS,
2398                .gpiomask       = 0x010000,
2399                .no_gpioirq     = 1,
2400                .muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2401                .pll            = PLL_28,
2402                .no_msp34xx     = 1,
2403                .no_tda7432     = 1,
2404                .muxsel_hook    = kodicom4400r_muxsel,
2405        },
2406                /* ---- card 0x86---------------------------------- */
2407        [BTTV_BOARD_ADLINK_RTV24] = {
2408                /* Michael Henson <mhenson@clarityvi.com> */
2409                /* Adlink RTV24 with special unlock codes */
2410                .name           = "Adlink RTV24",
2411                .video_inputs   = 4,
2412                /* .audio_inputs= 1, */
2413                .svhs           = 2,
2414                .muxsel         = MUXSEL(2, 3, 1, 0),
2415                .tuner_type     = UNSET,
2416                .tuner_addr     = ADDR_UNSET,
2417                .pll            = PLL_28,
2418        },
2419                /* ---- card 0x87---------------------------------- */
2420        [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2421                /* Michael Krufky <mkrufky@linuxtv.org> */
2422                .name           = "DViCO FusionHDTV 5 Lite",
2423                .tuner_type     = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
2424                .tuner_addr     = ADDR_UNSET,
2425                .video_inputs   = 3,
2426                /* .audio_inputs= 1, */
2427                .svhs           = 2,
2428                .muxsel         = MUXSEL(2, 3, 1),
2429                .gpiomask       = 0x00e00007,
2430                .gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2431                .gpiomute       = 0x00c00007,
2432                .no_msp34xx     = 1,
2433                .no_tda7432     = 1,
2434                .has_dvb        = 1,
2435        },
2436                /* ---- card 0x88---------------------------------- */
2437        [BTTV_BOARD_ACORP_Y878F] = {
2438                /* Mauro Carvalho Chehab <mchehab@kernel.org> */
2439                .name           = "Acorp Y878F",
2440                .video_inputs   = 3,
2441                /* .audio_inputs= 1, */
2442                .svhs           = 2,
2443                .gpiomask       = 0x01fe00,
2444                .muxsel         = MUXSEL(2, 3, 1, 1),
2445                .gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
2446                .gpiomute       = 0x002000,
2447                .pll            = PLL_28,
2448                .tuner_type     = TUNER_YMEC_TVF66T5_B_DFF,
2449                .tuner_addr     = 0xc1 >>1,
2450                .has_radio      = 1,
2451        },
2452                /* ---- card 0x89 ---------------------------------- */
2453        [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2454                .name           = "Conceptronic CTVFMi v2",
2455                .video_inputs   = 3,
2456                /* .audio_inputs= 1, */
2457                .svhs           = 2,
2458                .gpiomask       = 0x001c0007,
2459                .muxsel         = MUXSEL(2, 3, 1, 1),
2460                .gpiomux        = { 0, 1, 2, 2 },
2461                .gpiomute       = 3,
2462                .pll            = PLL_28,
2463                .tuner_type     = TUNER_TENA_9533_DI,
2464                .tuner_addr     = ADDR_UNSET,
2465                .has_remote     = 1,
2466                .has_radio      = 1,
2467        },
2468                /* ---- card 0x8a ---------------------------------- */
2469        [BTTV_BOARD_PV_BT878P_2E] = {
2470                .name           = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2471                .video_inputs   = 5,
2472                /* .audio_inputs= 1, */
2473                .svhs           = 3,
2474                .has_dig_in     = 1,
2475                .gpiomask       = 0x01fe00,
2476                .muxsel         = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
2477                /* .digital_mode= DIGITAL_MODE_CAMERA, */
2478                .gpiomux        = { 0x00400, 0x10400, 0x04400, 0x80000 },
2479                .gpiomute       = 0x12400,
2480                .no_msp34xx     = 1,
2481                .pll            = PLL_28,
2482                .tuner_type     = TUNER_LG_PAL_FM,
2483                .tuner_addr     = ADDR_UNSET,
2484                .has_remote     = 1,
2485        },
2486                /* ---- card 0x8b ---------------------------------- */
2487        [BTTV_BOARD_PV_M4900] = {
2488                /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2489                .name           = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2490                .video_inputs   = 3,
2491                /* .audio_inputs= 1, */
2492                .svhs           = 2,
2493                .gpiomask       = 0x3f,
2494                .muxsel         = MUXSEL(2, 3, 1, 1),
2495                .gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
2496                .gpiomute       = 0x29,
2497                .no_msp34xx     = 1,
2498                .pll            = PLL_28,
2499                .tuner_type     = TUNER_YMEC_TVF_5533MF,
2500                .tuner_addr     = ADDR_UNSET,
2501                .has_radio      = 1,
2502                .has_remote     = 1,
2503        },
2504                /* ---- card 0x8c ---------------------------------- */
2505        /* Has four Bt878 chips behind a PCI bridge, each chip has:
2506             one external BNC composite input (mux 2)
2507             three internal composite inputs (unknown muxes)
2508             an 18-bit stereo A/D (CS5331A), which has:
2509               one external stereo unbalanced (RCA) audio connection
2510               one (or 3?) internal stereo balanced (XLR) audio connection
2511               input is selected via gpio to a 14052B mux
2512                 (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
2513               gain is controlled via an X9221A chip on the I2C bus @0x28
2514               sample rate is controlled via gpio to an MK1413S
2515                 (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
2516             There is neither a tuner nor an svideo input. */
2517        [BTTV_BOARD_OSPREY440]  = {
2518                .name           = "Osprey 440",
2519                .video_inputs   = 4,
2520                /* .audio_inputs= 2, */
2521                .svhs           = NO_SVHS,
2522                .muxsel         = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */
2523                .gpiomask       = 0x303,
2524                .gpiomute       = 0x000, /* int + 32kHz */
2525                .gpiomux        = { 0, 0, 0x000, 0x100},
2526                .pll            = PLL_28,
2527                .tuner_type     = TUNER_ABSENT,
2528                .tuner_addr     = ADDR_UNSET,
2529                .no_msp34xx     = 1,
2530                .no_tda7432     = 1,
2531        },
2532                /* ---- card 0x8d ---------------------------------- */
2533        [BTTV_BOARD_ASOUND_SKYEYE] = {
2534                .name           = "Asound Skyeye PCTV",
2535                .video_inputs   = 3,
2536                /* .audio_inputs= 1, */
2537                .svhs           = 2,
2538                .gpiomask       = 15,
2539                .muxsel         = MUXSEL(2, 3, 1, 1),
2540                .gpiomux        = { 2, 0, 0, 0 },
2541                .gpiomute       = 1,
2542                .pll            = PLL_28,
2543                .tuner_type     = TUNER_PHILIPS_NTSC,
2544                .tuner_addr     = ADDR_UNSET,
2545        },
2546                /* ---- card 0x8e ---------------------------------- */
2547        [BTTV_BOARD_SABRENT_TVFM] = {
2548                .name           = "Sabrent TV-FM (bttv version)",
2549                .video_inputs   = 3,
2550                /* .audio_inputs= 1, */
2551                .svhs           = 2,
2552                .gpiomask       = 0x108007,
2553                .muxsel         = MUXSEL(2, 3, 1, 1),
2554                .gpiomux        = { 100000, 100002, 100002, 100000 },
2555                .no_msp34xx     = 1,
2556                .no_tda7432     = 1,
2557                .pll            = PLL_28,
2558                .tuner_type     = TUNER_TNF_5335MF,
2559                .tuner_addr     = ADDR_UNSET,
2560                .has_radio      = 1,
2561        },
2562        /* ---- card 0x8f ---------------------------------- */
2563        [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2564                .name           = "Hauppauge ImpactVCB (bt878)",
2565                .video_inputs   = 4,
2566                /* .audio_inputs= 0, */
2567                .svhs           = NO_SVHS,
2568                .gpiomask       = 0x0f, /* old: 7 */
2569                .muxsel         = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */
2570                .no_msp34xx     = 1,
2571                .no_tda7432     = 1,
2572                .tuner_type     = TUNER_ABSENT,
2573                .tuner_addr     = ADDR_UNSET,
2574        },
2575        [BTTV_BOARD_MACHTV_MAGICTV] = {
2576                /* Julian Calaby <julian.calaby@gmail.com>
2577                 * Slightly different from original MachTV definition (0x60)
2578
2579                 * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2580                 * stuffs up remote chip. Bug is a pin on the jaecs is not set
2581                 * properly (methinks) causing no keyup bits being set */
2582
2583                .name           = "MagicTV", /* rebranded MachTV */
2584                .video_inputs   = 3,
2585                /* .audio_inputs= 1, */
2586                .svhs           = 2,
2587                .gpiomask       = 7,
2588                .muxsel         = MUXSEL(2, 3, 1, 1),
2589                .gpiomux        = { 0, 1, 2, 3 },
2590                .gpiomute       = 4,
2591                .tuner_type     = TUNER_TEMIC_4009FR5_PAL,
2592                .tuner_addr     = ADDR_UNSET,
2593                .pll            = PLL_28,
2594                .has_radio      = 1,
2595                .has_remote     = 1,
2596        },
2597        [BTTV_BOARD_SSAI_SECURITY] = {
2598                .name           = "SSAI Security Video Interface",
2599                .video_inputs   = 4,
2600                /* .audio_inputs= 0, */
2601                .svhs           = NO_SVHS,
2602                .muxsel         = MUXSEL(0, 1, 2, 3),
2603                .tuner_type     = TUNER_ABSENT,
2604                .tuner_addr     = ADDR_UNSET,
2605        },
2606        [BTTV_BOARD_SSAI_ULTRASOUND] = {
2607                .name           = "SSAI Ultrasound Video Interface",
2608                .video_inputs   = 2,
2609                /* .audio_inputs= 0, */
2610                .svhs           = 1,
2611                .muxsel         = MUXSEL(2, 0, 1, 3),
2612                .tuner_type     = TUNER_ABSENT,
2613                .tuner_addr     = ADDR_UNSET,
2614        },
2615        /* ---- card 0x94---------------------------------- */
2616        [BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
2617                .name           = "DViCO FusionHDTV 2",
2618                .tuner_type     = TUNER_PHILIPS_FCV1236D,
2619                .tuner_addr     = ADDR_UNSET,
2620                .video_inputs   = 3,
2621                /* .audio_inputs= 1, */
2622                .svhs           = 2,
2623                .muxsel         = MUXSEL(2, 3, 1),
2624                .gpiomask       = 0x00e00007,
2625                .gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2626                .gpiomute       = 0x00c00007,
2627                .no_msp34xx     = 1,
2628                .no_tda7432     = 1,
2629        },
2630        /* ---- card 0x95---------------------------------- */
2631        [BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
2632                .name           = "Typhoon TV-Tuner PCI (50684)",
2633                .video_inputs   = 3,
2634                /* .audio_inputs= 1, */
2635                .svhs           = 2,
2636                .gpiomask       = 0x3014f,
2637                .muxsel         = MUXSEL(2, 3, 1, 1),
2638                .gpiomux        = { 0x20001,0x10001, 0, 0 },
2639                .gpiomute       = 10,
2640                .pll            = PLL_28,
2641                .tuner_type     = TUNER_PHILIPS_PAL_I,
2642                .tuner_addr     = ADDR_UNSET,
2643        },
2644        [BTTV_BOARD_GEOVISION_GV600] = {
2645                /* emhn@usb.ve */
2646                .name           = "Geovision GV-600",
2647                .video_inputs   = 16,
2648                /* .audio_inputs= 0, */
2649                .svhs           = NO_SVHS,
2650                .gpiomask       = 0x0,
2651                .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2652                .muxsel_hook    = geovision_muxsel,
2653                .gpiomux        = { 0 },
2654                .no_msp34xx     = 1,
2655                .pll            = PLL_28,
2656                .tuner_type     = TUNER_ABSENT,
2657                .tuner_addr     = ADDR_UNSET,
2658        },
2659        [BTTV_BOARD_KOZUMI_KTV_01C] = {
2660                /* Mauro Lacy <mauro@lacy.com.ar>
2661                 * Based on MagicTV and Conceptronic CONTVFMi */
2662
2663                .name           = "Kozumi KTV-01C",
2664                .video_inputs   = 3,
2665                /* .audio_inputs= 1, */
2666                .svhs           = 2,
2667                .gpiomask       = 0x008007,
2668                .muxsel         = MUXSEL(2, 3, 1, 1),
2669                .gpiomux        = { 0, 1, 2, 2 }, /* CONTVFMi */
2670                .gpiomute       = 3, /* CONTVFMi */
2671                .tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
2672                .tuner_addr     = ADDR_UNSET,
2673                .pll            = PLL_28,
2674                .has_radio      = 1,
2675                .has_remote     = 1,
2676        },
2677        [BTTV_BOARD_ENLTV_FM_2] = {
2678                /* Encore TV Tuner Pro ENL TV-FM-2
2679                   Mauro Carvalho Chehab <mchehab@kernel.org> */
2680                .name           = "Encore ENL TV-FM-2",
2681                .video_inputs   = 3,
2682                /* .audio_inputs= 1, */
2683                .svhs           = 2,
2684                /* bit 6          -> IR disabled
2685                   bit 18/17 = 00 -> mute
2686                               01 -> enable external audio input
2687                               10 -> internal audio input (mono?)
2688                               11 -> internal audio input
2689                 */
2690                .gpiomask       = 0x060040,
2691                .muxsel         = MUXSEL(2, 3, 3),
2692                .gpiomux        = { 0x60000, 0x60000, 0x20000, 0x20000 },
2693                .gpiomute       = 0,
2694                .tuner_type     = TUNER_TCL_MF02GIP_5N,
2695                .tuner_addr     = ADDR_UNSET,
2696                .pll            = PLL_28,
2697                .has_radio      = 1,
2698                .has_remote     = 1,
2699        },
2700        [BTTV_BOARD_VD012] = {
2701                /* D.Heer@Phytec.de */
2702                .name           = "PHYTEC VD-012 (bt878)",
2703                .video_inputs   = 4,
2704                /* .audio_inputs= 0, */
2705                .svhs           = NO_SVHS,
2706                .gpiomask       = 0x00,
2707                .muxsel         = MUXSEL(0, 2, 3, 1),
2708                .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2709                .pll            = PLL_28,
2710                .tuner_type     = TUNER_ABSENT,
2711                .tuner_addr     = ADDR_UNSET,
2712        },
2713        [BTTV_BOARD_VD012_X1] = {
2714                /* D.Heer@Phytec.de */
2715                .name           = "PHYTEC VD-012-X1 (bt878)",
2716                .video_inputs   = 4,
2717                /* .audio_inputs= 0, */
2718                .svhs           = 3,
2719                .gpiomask       = 0x00,
2720                .muxsel         = MUXSEL(2, 3, 1),
2721                .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2722                .pll            = PLL_28,
2723                .tuner_type     = TUNER_ABSENT,
2724                .tuner_addr     = ADDR_UNSET,
2725        },
2726        [BTTV_BOARD_VD012_X2] = {
2727                /* D.Heer@Phytec.de */
2728                .name           = "PHYTEC VD-012-X2 (bt878)",
2729                .video_inputs   = 4,
2730                /* .audio_inputs= 0, */
2731                .svhs           = 3,
2732                .gpiomask       = 0x00,
2733                .muxsel         = MUXSEL(3, 2, 1),
2734                .gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2735                .pll            = PLL_28,
2736                .tuner_type     = TUNER_ABSENT,
2737                .tuner_addr     = ADDR_UNSET,
2738        },
2739        [BTTV_BOARD_GEOVISION_GV800S] = {
2740                /* Bruno Christo <bchristo@inf.ufsm.br>
2741                 *
2742                 * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2743                 *      1 audio input  per BT878A = 4 audio inputs
2744                 *      4 video inputs per BT878A = 16 video inputs
2745                 * This is the first BT878A chip of the GV-800(S). It's the
2746                 * "master" chip and it controls the video inputs through an
2747                 * analog multiplexer (a CD22M3494) via some GPIO pins. The
2748                 * slaves should use card type 0x9e (following this one).
2749                 * There is a EEPROM on the card which is currently not handled.
2750                 * The audio input is not working yet.
2751                 */
2752                .name           = "Geovision GV-800(S) (master)",
2753                .video_inputs   = 4,
2754                /* .audio_inputs= 1, */
2755                .tuner_type     = TUNER_ABSENT,
2756                .tuner_addr     = ADDR_UNSET,
2757                .svhs           = NO_SVHS,
2758                .gpiomask       = 0xf107f,
2759                .no_gpioirq     = 1,
2760                .muxsel         = MUXSEL(2, 2, 2, 2),
2761                .pll            = PLL_28,
2762                .no_msp34xx     = 1,
2763                .no_tda7432     = 1,
2764                .muxsel_hook    = gv800s_muxsel,
2765        },
2766        [BTTV_BOARD_GEOVISION_GV800S_SL] = {
2767                /* Bruno Christo <bchristo@inf.ufsm.br>
2768                 *
2769                 * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2770                 *      1 audio input  per BT878A = 4 audio inputs
2771                 *      4 video inputs per BT878A = 16 video inputs
2772                 * The 3 other BT878A chips are "slave" chips of the GV-800(S)
2773                 * and should use this card type.
2774                 * The audio input is not working yet.
2775                 */
2776                .name           = "Geovision GV-800(S) (slave)",
2777                .video_inputs   = 4,
2778                /* .audio_inputs= 1, */
2779                .tuner_type     = TUNER_ABSENT,
2780                .tuner_addr     = ADDR_UNSET,
2781                .svhs           = NO_SVHS,
2782                .gpiomask       = 0x00,
2783                .no_gpioirq     = 1,
2784                .muxsel         = MUXSEL(2, 2, 2, 2),
2785                .pll            = PLL_28,
2786                .no_msp34xx     = 1,
2787                .no_tda7432     = 1,
2788                .muxsel_hook    = gv800s_muxsel,
2789        },
2790        [BTTV_BOARD_PV183] = {
2791                .name           = "ProVideo PV183", /* 0x9f */
2792                .video_inputs   = 2,
2793                /* .audio_inputs= 0, */
2794                .svhs           = NO_SVHS,
2795                .gpiomask       = 0,
2796                .muxsel         = MUXSEL(2, 3),
2797                .gpiomux        = { 0 },
2798                .no_msp34xx     = 1,
2799                .pll            = PLL_28,
2800                .tuner_type     = TUNER_ABSENT,
2801                .tuner_addr     = ADDR_UNSET,
2802        },
2803        /* ---- card 0xa0---------------------------------- */
2804        [BTTV_BOARD_TVT_TD3116] = {
2805                .name           = "Tongwei Video Technology TD-3116",
2806                .video_inputs   = 16,
2807                .gpiomask       = 0xc00ff,
2808                .muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2809                .muxsel_hook    = td3116_muxsel,
2810                .svhs           = NO_SVHS,
2811                .pll            = PLL_28,
2812                .tuner_type     = TUNER_ABSENT,
2813        },
2814        [BTTV_BOARD_APOSONIC_WDVR] = {
2815                .name           = "Aposonic W-DVR",
2816                .video_inputs   = 4,
2817                .svhs           = NO_SVHS,
2818                .muxsel         = MUXSEL(2, 3, 1, 0),
2819                .tuner_type     = TUNER_ABSENT,
2820        },
2821        [BTTV_BOARD_ADLINK_MPG24] = {
2822                /* Adlink MPG24 */
2823                .name           = "Adlink MPG24",
2824                .video_inputs   = 1,
2825                /* .audio_inputs= 1, */
2826                .svhs           = NO_SVHS,
2827                .muxsel         = MUXSEL(2, 2, 2, 2),
2828                .tuner_type     = UNSET,
2829                .tuner_addr     = ADDR_UNSET,
2830                .pll            = PLL_28,
2831        },
2832        [BTTV_BOARD_BT848_CAP_14] = {
2833                .name           = "Bt848 Capture 14MHz",
2834                .video_inputs   = 4,
2835                .svhs           = 2,
2836                .muxsel         = MUXSEL(2, 3, 1, 0),
2837                .pll            = PLL_14,
2838                .tuner_type     = TUNER_ABSENT,
2839        },
2840        [BTTV_BOARD_CYBERVISION_CV06] = {
2841                .name           = "CyberVision CV06 (SV)",
2842                .video_inputs   = 4,
2843                /* .audio_inputs= 0, */
2844                .svhs           = NO_SVHS,
2845                .muxsel         = MUXSEL(2, 3, 1, 0),
2846                .pll            = PLL_28,
2847                .tuner_type     = TUNER_ABSENT,
2848                .tuner_addr     = ADDR_UNSET,
2849        },
2850        [BTTV_BOARD_KWORLD_VSTREAM_XPERT] = {
2851                /* Pojar George <geoubuntu@gmail.com> */
2852                .name           = "Kworld V-Stream Xpert TV PVR878",
2853                .video_inputs   = 3,
2854                /* .audio_inputs= 1, */
2855                .svhs           = 2,
2856                .gpiomask       = 0x001c0007,
2857                .muxsel         = MUXSEL(2, 3, 1, 1),
2858                .gpiomux        = { 0, 1, 2, 2 },
2859                .gpiomute       = 3,
2860                .pll            = PLL_28,
2861                .tuner_type     = TUNER_TENA_9533_DI,
2862                .tuner_addr    = ADDR_UNSET,
2863                .has_remote     = 1,
2864                .has_radio      = 1,
2865        },
2866        /* ---- card 0xa6---------------------------------- */
2867        [BTTV_BOARD_PCI_8604PW] = {
2868                /* PCI-8604PW with special unlock sequence */
2869                .name           = "PCI-8604PW",
2870                .video_inputs   = 2,
2871                /* .audio_inputs= 0, */
2872                .svhs           = NO_SVHS,
2873                /* The second input is available on CN4, if populated.
2874                 * The other 5x2 header (CN2?) connects to the same inputs
2875                 * as the on-board BNCs */
2876                .muxsel         = MUXSEL(2, 3),
2877                .tuner_type     = TUNER_ABSENT,
2878                .no_msp34xx     = 1,
2879                .no_tda7432     = 1,
2880                .pll            = PLL_35,
2881        },
2882};
2883
2884static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2885
2886/* ----------------------------------------------------------------------- */
2887
2888static unsigned char eeprom_data[256];
2889
2890/*
2891 * identify card
2892 */
2893void bttv_idcard(struct bttv *btv)
2894{
2895        unsigned int gpiobits;
2896        int i,type;
2897
2898        /* read PCI subsystem ID */
2899        btv->cardid  = btv->c.pci->subsystem_device << 16;
2900        btv->cardid |= btv->c.pci->subsystem_vendor;
2901
2902        if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2903                /* look for the card */
2904                for (type = -1, i = 0; cards[i].id != 0; i++)
2905                        if (cards[i].id  == btv->cardid)
2906                                type = i;
2907
2908                if (type != -1) {
2909                        /* found it */
2910                        pr_info("%d: detected: %s [card=%d], PCI subsystem ID is %04x:%04x\n",
2911                                btv->c.nr, cards[type].name, cards[type].cardnr,
2912                                btv->cardid & 0xffff,
2913                                (btv->cardid >> 16) & 0xffff);
2914                        btv->c.type = cards[type].cardnr;
2915                } else {
2916                        /* 404 */
2917                        pr_info("%d: subsystem: %04x:%04x (UNKNOWN)\n",
2918                                btv->c.nr, btv->cardid & 0xffff,
2919                                (btv->cardid >> 16) & 0xffff);
2920                        pr_debug("please mail id, board name and the correct card= insmod option to linux-media@vger.kernel.org\n");
2921                }
2922        }
2923
2924        /* let the user override the autodetected type */
2925        if (card[btv->c.nr] < bttv_num_tvcards)
2926                btv->c.type=card[btv->c.nr];
2927
2928        /* print which card config we are using */
2929        pr_info("%d: using: %s [card=%d,%s]\n",
2930                btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type,
2931                card[btv->c.nr] < bttv_num_tvcards
2932                ? "insmod option" : "autodetected");
2933
2934        /* overwrite gpio stuff ?? */
2935        if (UNSET == audioall && UNSET == audiomux[0])
2936                return;
2937
2938        if (UNSET != audiomux[0]) {
2939                gpiobits = 0;
2940                for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2941                        bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
2942                        gpiobits |= audiomux[i];
2943                }
2944        } else {
2945                gpiobits = audioall;
2946                for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2947                        bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
2948                }
2949        }
2950        bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
2951        pr_info("%d: gpio config override: mask=0x%x, mux=",
2952                btv->c.nr, bttv_tvcards[btv->c.type].gpiomask);
2953        for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2954                pr_cont("%s0x%x",
2955                        i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
2956        }
2957        pr_cont("\n");
2958}
2959
2960/*
2961 * (most) board specific initialisations goes here
2962 */
2963
2964/* Some Modular Technology cards have an eeprom, but no subsystem ID */
2965static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
2966{
2967        int type = -1;
2968
2969        if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
2970                type = BTTV_BOARD_MODTEC_205;
2971        else if (0 == strncmp(eeprom_data+20,"Picolo",7))
2972                type = BTTV_BOARD_EURESYS_PICOLO;
2973        else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
2974                type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
2975
2976        if (-1 != type) {
2977                btv->c.type = type;
2978                pr_info("%d: detected by eeprom: %s [card=%d]\n",
2979                        btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
2980        }
2981}
2982
2983static void flyvideo_gpio(struct bttv *btv)
2984{
2985        int gpio, has_remote, has_radio, is_capture_only;
2986        int is_lr90, has_tda9820_tda9821;
2987        int tuner_type = UNSET, ttype;
2988
2989        gpio_inout(0xffffff, 0);
2990        udelay(8);  /* without this we would see the 0x1800 mask */
2991        gpio = gpio_read();
2992        /* FIXME: must restore OUR_EN ??? */
2993
2994        /* all cards provide GPIO info, some have an additional eeprom
2995         * LR50: GPIO coding can be found lower right CP1 .. CP9
2996         *       CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
2997         *       GPIO14-12: n.c.
2998         * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
2999
3000         * lowest 3 bytes are remote control codes (no handshake needed)
3001         * xxxFFF: No remote control chip soldered
3002         * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
3003         * Note: Some bits are Audio_Mask !
3004         */
3005        ttype = (gpio & 0x0f0000) >> 16;
3006        switch (ttype) {
3007        case 0x0:
3008                tuner_type = 2;  /* NTSC, e.g. TPI8NSR11P */
3009                break;
3010        case 0x2:
3011                tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
3012                break;
3013        case 0x4:
3014                tuner_type = 5;  /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
3015                break;
3016        case 0x6:
3017                tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
3018                break;
3019        case 0xC:
3020                tuner_type = 3;  /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
3021                break;
3022        default:
3023                pr_info("%d: FlyVideo_gpio: unknown tuner type\n", btv->c.nr);
3024                break;
3025        }
3026
3027        has_remote          =   gpio & 0x800000;
3028        has_radio           =   gpio & 0x400000;
3029        /*   unknown                   0x200000;
3030         *   unknown2                  0x100000; */
3031        is_capture_only     = !(gpio & 0x008000); /* GPIO15 */
3032        has_tda9820_tda9821 = !(gpio & 0x004000);
3033        is_lr90             = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
3034        /*
3035         * gpio & 0x001000    output bit for audio routing */
3036
3037        if (is_capture_only)
3038                tuner_type = TUNER_ABSENT; /* No tuner present */
3039
3040        pr_info("%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
3041                btv->c.nr, has_radio ? "yes" : "no",
3042                has_remote ? "yes" : "no", tuner_type, gpio);
3043        pr_info("%d: FlyVideo  LR90=%s tda9821/tda9820=%s capture_only=%s\n",
3044                btv->c.nr, is_lr90 ? "yes" : "no",
3045                has_tda9820_tda9821 ? "yes" : "no",
3046                is_capture_only ? "yes" : "no");
3047
3048        if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
3049                btv->tuner_type = tuner_type;
3050        btv->has_radio = has_radio;
3051
3052        /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3053         * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3054         * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3055        if (has_tda9820_tda9821)
3056                btv->audio_mode_gpio = lt9415_audio;
3057        /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
3058}
3059
3060static int miro_tunermap[] = { 0,6,2,3,   4,5,6,0,  3,0,4,5,  5,2,16,1,
3061                               14,2,17,1, 4,1,4,3,  1,2,16,1, 4,4,4,4 };
3062static int miro_fmtuner[]  = { 0,0,0,0,   0,0,0,0,  0,0,0,0,  0,0,0,1,
3063                               1,1,1,1,   1,1,1,0,  0,0,0,0,  0,1,0,0 };
3064
3065static void miro_pinnacle_gpio(struct bttv *btv)
3066{
3067        int id,msp,gpio;
3068        char *info;
3069
3070        gpio_inout(0xffffff, 0);
3071        gpio = gpio_read();
3072        id   = ((gpio>>10) & 63) -1;
3073        msp  = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3074        if (id < 32) {
3075                btv->tuner_type = miro_tunermap[id];
3076                if (0 == (gpio & 0x20)) {
3077                        btv->has_radio = 1;
3078                        if (!miro_fmtuner[id]) {
3079                                btv->has_tea575x = 1;
3080                                btv->tea_gpio.wren = 6;
3081                                btv->tea_gpio.most = 7;
3082                                btv->tea_gpio.clk  = 8;
3083                                btv->tea_gpio.data = 9;
3084                                tea575x_init(btv);
3085                        }
3086                } else {
3087                        btv->has_radio = 0;
3088                }
3089                if (-1 != msp) {
3090                        if (btv->c.type == BTTV_BOARD_MIRO)
3091                                btv->c.type = BTTV_BOARD_MIROPRO;
3092                        if (btv->c.type == BTTV_BOARD_PINNACLE)
3093                                btv->c.type = BTTV_BOARD_PINNACLEPRO;
3094                }
3095                pr_info("%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3096                        btv->c.nr, id+1, btv->tuner_type,
3097                        !btv->has_radio ? "no" :
3098                        (btv->has_tea575x ? "tea575x" : "fmtuner"),
3099                        (-1 == msp) ? "no" : "yes");
3100        } else {
3101                /* new cards with microtune tuner */
3102                id = 63 - id;
3103                btv->has_radio = 0;
3104                switch (id) {
3105                case 1:
3106                        info = "PAL / mono";
3107                        btv->tda9887_conf = TDA9887_INTERCARRIER;
3108                        break;
3109                case 2:
3110                        info = "PAL+SECAM / stereo";
3111                        btv->has_radio = 1;
3112                        btv->tda9887_conf = TDA9887_QSS;
3113                        break;
3114                case 3:
3115                        info = "NTSC / stereo";
3116                        btv->has_radio = 1;
3117                        btv->tda9887_conf = TDA9887_QSS;
3118                        break;
3119                case 4:
3120                        info = "PAL+SECAM / mono";
3121                        btv->tda9887_conf = TDA9887_QSS;
3122                        break;
3123                case 5:
3124                        info = "NTSC / mono";
3125                        btv->tda9887_conf = TDA9887_INTERCARRIER;
3126                        break;
3127                case 6:
3128                        info = "NTSC / stereo";
3129                        btv->tda9887_conf = TDA9887_INTERCARRIER;
3130                        break;
3131                case 7:
3132                        info = "PAL / stereo";
3133                        btv->tda9887_conf = TDA9887_INTERCARRIER;
3134                        break;
3135                default:
3136                        info = "oops: unknown card";
3137                        break;
3138                }
3139                if (-1 != msp)
3140                        btv->c.type = BTTV_BOARD_PINNACLEPRO;
3141                pr_info("%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3142                        btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3143                btv->tuner_type = TUNER_MT2032;
3144        }
3145}
3146
3147/* GPIO21   L: Buffer aktiv, H: Buffer inaktiv */
3148#define LM1882_SYNC_DRIVE     0x200000L
3149
3150static void init_ids_eagle(struct bttv *btv)
3151{
3152        gpio_inout(0xffffff,0xFFFF37);
3153        gpio_write(0x200020);
3154
3155        /* flash strobe inverter ?! */
3156        gpio_write(0x200024);
3157
3158        /* switch sync drive off */
3159        gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3160
3161        /* set BT848 muxel to 2 */
3162        btaor((2)<<5, ~(2<<5), BT848_IFORM);
3163}
3164
3165/* Muxsel helper for the IDS Eagle.
3166 * the eagles does not use the standard muxsel-bits but
3167 * has its own multiplexer */
3168static void eagle_muxsel(struct bttv *btv, unsigned int input)
3169{
3170        gpio_bits(3, input & 3);
3171
3172        /* composite */
3173        /* set chroma ADC to sleep */
3174        btor(BT848_ADC_C_SLEEP, BT848_ADC);
3175        /* set to composite video */
3176        btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3177        btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3178
3179        /* switch sync drive off */
3180        gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3181}
3182
3183static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3184{
3185        static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3186        gpio_write(masks[input%4]);
3187}
3188
3189/* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3190   alarms output
3191
3192   GPIObit    | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3193   assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1|   |   |
3194
3195   IN - sensor inputs, INx - sensor inputs and TI XORed together
3196   O1,O2,O3 - alarm outputs (relays)
3197
3198   OUT ENABLE   1    1   0  . 1  1   0   0 . 0   0   0    0   = 0x6C0
3199
3200*/
3201
3202static void init_lmlbt4x(struct bttv *btv)
3203{
3204        pr_debug("LMLBT4x init\n");
3205        btwrite(0x000000, BT848_GPIO_REG_INP);
3206        gpio_inout(0xffffff, 0x0006C0);
3207        gpio_write(0x000000);
3208}
3209
3210static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3211{
3212        unsigned int inmux = input % 8;
3213        gpio_inout( 0xf, 0xf );
3214        gpio_bits( 0xf, inmux );
3215}
3216
3217static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3218{
3219        unsigned int inmux = input % 4;
3220        gpio_inout( 3<<9, 3<<9 );
3221        gpio_bits( 3<<9, inmux<<9 );
3222}
3223
3224static void geovision_muxsel(struct bttv *btv, unsigned int input)
3225{
3226        unsigned int inmux = input % 16;
3227        gpio_inout(0xf, 0xf);
3228        gpio_bits(0xf, inmux);
3229}
3230
3231/*
3232 * The TD3116 has 2 74HC4051 muxes wired to the MUX0 input of a bt878.
3233 * The first 74HC4051 has the lower 8 inputs, the second one the higher 8.
3234 * The muxes are controlled via a 74HC373 latch which is connected to
3235 * GPIOs 0-7. GPIO 18 is connected to the LE signal of the latch.
3236 * Q0 of the latch is connected to the Enable (~E) input of the first
3237 * 74HC4051. Q1 - Q3 are connected to S0 - S2 of the same 74HC4051.
3238 * Q4 - Q7 are connected to the second 74HC4051 in the same way.
3239 */
3240
3241static void td3116_latch_value(struct bttv *btv, u32 value)
3242{
3243        gpio_bits((1<<18) | 0xff, value);
3244        gpio_bits((1<<18) | 0xff, (1<<18) | value);
3245        udelay(1);
3246        gpio_bits((1<<18) | 0xff, value);
3247}
3248
3249static void td3116_muxsel(struct bttv *btv, unsigned int input)
3250{
3251        u32 value;
3252        u32 highbit;
3253
3254        highbit = (input & 0x8) >> 3 ;
3255
3256        /* Disable outputs and set value in the mux */
3257        value = 0x11; /* Disable outputs */
3258        value |= ((input & 0x7) << 1)  << (4 * highbit);
3259        td3116_latch_value(btv, value);
3260
3261        /* Enable the correct output */
3262        value &= ~0x11;
3263        value |= ((highbit ^ 0x1) << 4) | highbit;
3264        td3116_latch_value(btv, value);
3265}
3266
3267/* ----------------------------------------------------------------------- */
3268
3269static void bttv_reset_audio(struct bttv *btv)
3270{
3271        /*
3272         * BT878A has a audio-reset register.
3273         * 1. This register is an audio reset function but it is in
3274         *    function-0 (video capture) address space.
3275         * 2. It is enough to do this once per power-up of the card.
3276         * 3. There is a typo in the Conexant doc -- it is not at
3277         *    0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3278         * --//Shrikumar 030609
3279         */
3280        if (btv->id != 878)
3281                return;
3282
3283        if (bttv_debug)
3284                pr_debug("%d: BT878A ARESET\n", btv->c.nr);
3285        btwrite((1<<7), 0x058);
3286        udelay(10);
3287        btwrite(     0, 0x058);
3288}
3289
3290/* initialization part one -- before registering i2c bus */
3291void bttv_init_card1(struct bttv *btv)
3292{
3293        switch (btv->c.type) {
3294        case BTTV_BOARD_HAUPPAUGE:
3295        case BTTV_BOARD_HAUPPAUGE878:
3296                boot_msp34xx(btv,5);
3297                break;
3298        case BTTV_BOARD_VOODOOTV_200:
3299        case BTTV_BOARD_VOODOOTV_FM:
3300                boot_msp34xx(btv,20);
3301                break;
3302        case BTTV_BOARD_AVERMEDIA98:
3303                boot_msp34xx(btv,11);
3304                break;
3305        case BTTV_BOARD_HAUPPAUGEPVR:
3306                pvr_boot(btv);
3307                break;
3308        case BTTV_BOARD_TWINHAN_DST:
3309        case BTTV_BOARD_AVDVBT_771:
3310        case BTTV_BOARD_PINNACLESAT:
3311                btv->use_i2c_hw = 1;
3312                break;
3313        case BTTV_BOARD_ADLINK_RTV24:
3314                init_RTV24( btv );
3315                break;
3316        case BTTV_BOARD_PCI_8604PW:
3317                init_PCI8604PW(btv);
3318                break;
3319
3320        }
3321        if (!bttv_tvcards[btv->c.type].has_dvb)
3322                bttv_reset_audio(btv);
3323}
3324
3325/* initialization part two -- after registering i2c bus */
3326void bttv_init_card2(struct bttv *btv)
3327{
3328        btv->tuner_type = UNSET;
3329
3330        if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3331                bttv_readee(btv,eeprom_data,0xa0);
3332                identify_by_eeprom(btv,eeprom_data);
3333        }
3334
3335        switch (btv->c.type) {
3336        case BTTV_BOARD_MIRO:
3337        case BTTV_BOARD_MIROPRO:
3338        case BTTV_BOARD_PINNACLE:
3339        case BTTV_BOARD_PINNACLEPRO:
3340                /* miro/pinnacle */
3341                miro_pinnacle_gpio(btv);
3342                break;
3343        case BTTV_BOARD_FLYVIDEO_98:
3344        case BTTV_BOARD_MAXI:
3345        case BTTV_BOARD_LIFE_FLYKIT:
3346        case BTTV_BOARD_FLYVIDEO:
3347        case BTTV_BOARD_TYPHOON_TVIEW:
3348        case BTTV_BOARD_CHRONOS_VS2:
3349        case BTTV_BOARD_FLYVIDEO_98FM:
3350        case BTTV_BOARD_FLYVIDEO2000:
3351        case BTTV_BOARD_FLYVIDEO98EZ:
3352        case BTTV_BOARD_CONFERENCETV:
3353        case BTTV_BOARD_LIFETEC_9415:
3354                flyvideo_gpio(btv);
3355                break;
3356        case BTTV_BOARD_HAUPPAUGE:
3357        case BTTV_BOARD_HAUPPAUGE878:
3358        case BTTV_BOARD_HAUPPAUGEPVR:
3359                /* pick up some config infos from the eeprom */
3360                bttv_readee(btv,eeprom_data,0xa0);
3361                hauppauge_eeprom(btv);
3362                break;
3363        case BTTV_BOARD_AVERMEDIA98:
3364        case BTTV_BOARD_AVPHONE98:
3365                bttv_readee(btv,eeprom_data,0xa0);
3366                avermedia_eeprom(btv);
3367                break;
3368        case BTTV_BOARD_PXC200:
3369                init_PXC200(btv);
3370                break;
3371        case BTTV_BOARD_PICOLO_TETRA_CHIP:
3372                picolo_tetra_init(btv);
3373                break;
3374        case BTTV_BOARD_VHX:
3375                btv->has_radio    = 1;
3376                btv->has_tea575x  = 1;
3377                btv->tea_gpio.wren = 5;
3378                btv->tea_gpio.most = 6;
3379                btv->tea_gpio.clk  = 3;
3380                btv->tea_gpio.data = 4;
3381                tea575x_init(btv);
3382                break;
3383        case BTTV_BOARD_VOBIS_BOOSTAR:
3384        case BTTV_BOARD_TERRATV:
3385                terratec_active_radio_upgrade(btv);
3386                break;
3387        case BTTV_BOARD_MAGICTVIEW061:
3388                if (btv->cardid == 0x3002144f) {
3389                        btv->has_radio=1;
3390                        pr_info("%d: radio detected by subsystem id (CPH05x)\n",
3391                                btv->c.nr);
3392                }
3393                break;
3394        case BTTV_BOARD_STB2:
3395                if (btv->cardid == 0x3060121a) {
3396                        /* Fix up entry for 3DFX VoodooTV 100,
3397                           which is an OEM STB card variant. */
3398                        btv->has_radio=0;
3399                        btv->tuner_type=TUNER_TEMIC_NTSC;
3400                }
3401                break;
3402        case BTTV_BOARD_OSPREY1x0:
3403        case BTTV_BOARD_OSPREY1x0_848:
3404        case BTTV_BOARD_OSPREY101_848:
3405        case BTTV_BOARD_OSPREY1x1:
3406        case BTTV_BOARD_OSPREY1x1_SVID:
3407        case BTTV_BOARD_OSPREY2xx:
3408        case BTTV_BOARD_OSPREY2x0_SVID:
3409        case BTTV_BOARD_OSPREY2x0:
3410        case BTTV_BOARD_OSPREY440:
3411        case BTTV_BOARD_OSPREY500:
3412        case BTTV_BOARD_OSPREY540:
3413        case BTTV_BOARD_OSPREY2000:
3414                bttv_readee(btv,eeprom_data,0xa0);
3415                osprey_eeprom(btv, eeprom_data);
3416                break;
3417        case BTTV_BOARD_IDS_EAGLE:
3418                init_ids_eagle(btv);
3419                break;
3420        case BTTV_BOARD_MODTEC_205:
3421                bttv_readee(btv,eeprom_data,0xa0);
3422                modtec_eeprom(btv);
3423                break;
3424        case BTTV_BOARD_LMLBT4:
3425                init_lmlbt4x(btv);
3426                break;
3427        case BTTV_BOARD_TIBET_CS16:
3428                tibetCS16_init(btv);
3429                break;
3430        case BTTV_BOARD_KODICOM_4400R:
3431                kodicom4400r_init(btv);
3432                break;
3433        case BTTV_BOARD_GEOVISION_GV800S:
3434                gv800s_init(btv);
3435                break;
3436        }
3437
3438        /* pll configuration */
3439        if (!(btv->id==848 && btv->revision==0x11)) {
3440                /* defaults from card list */
3441                if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3442                        btv->pll.pll_ifreq=28636363;
3443                        btv->pll.pll_crystal=BT848_IFORM_XT0;
3444                }
3445                if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3446                        btv->pll.pll_ifreq=35468950;
3447                        btv->pll.pll_crystal=BT848_IFORM_XT1;
3448                }
3449                if (PLL_14 == bttv_tvcards[btv->c.type].pll) {
3450                        btv->pll.pll_ifreq = 14318181;
3451                        btv->pll.pll_crystal = BT848_IFORM_XT0;
3452                }
3453                /* insmod options can override */
3454                switch (pll[btv->c.nr]) {
3455                case 0: /* none */
3456                        btv->pll.pll_crystal = 0;
3457                        btv->pll.pll_ifreq   = 0;
3458                        btv->pll.pll_ofreq   = 0;
3459                        break;
3460                case 1: /* 28 MHz */
3461                case 28:
3462                        btv->pll.pll_ifreq   = 28636363;
3463                        btv->pll.pll_ofreq   = 0;
3464                        btv->pll.pll_crystal = BT848_IFORM_XT0;
3465                        break;
3466                case 2: /* 35 MHz */
3467                case 35:
3468                        btv->pll.pll_ifreq   = 35468950;
3469                        btv->pll.pll_ofreq   = 0;
3470                        btv->pll.pll_crystal = BT848_IFORM_XT1;
3471                        break;
3472                case 3: /* 14 MHz */
3473                case 14:
3474                        btv->pll.pll_ifreq   = 14318181;
3475                        btv->pll.pll_ofreq   = 0;
3476                        btv->pll.pll_crystal = BT848_IFORM_XT0;
3477                        break;
3478                }
3479        }
3480        btv->pll.pll_current = -1;
3481
3482        /* tuner configuration (from card list / autodetect / insmod option) */
3483        if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3484                if (UNSET == btv->tuner_type)
3485                        btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3486        if (UNSET != tuner[btv->c.nr])
3487                btv->tuner_type = tuner[btv->c.nr];
3488
3489        if (btv->tuner_type == TUNER_ABSENT)
3490                pr_info("%d: tuner absent\n", btv->c.nr);
3491        else if (btv->tuner_type == UNSET)
3492                pr_warn("%d: tuner type unset\n", btv->c.nr);
3493        else
3494                pr_info("%d: tuner type=%d\n", btv->c.nr, btv->tuner_type);
3495
3496        if (autoload != UNSET) {
3497                pr_warn("%d: the autoload option is obsolete\n", btv->c.nr);
3498                pr_warn("%d: use option msp3400, tda7432 or tvaudio to override which audio module should be used\n",
3499                        btv->c.nr);
3500        }
3501
3502        if (UNSET == btv->tuner_type)
3503                btv->tuner_type = TUNER_ABSENT;
3504
3505        btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
3506                   bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
3507        btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
3508                    UNSET : bttv_tvcards[btv->c.type].svhs;
3509        if (svhs[btv->c.nr] != UNSET)
3510                btv->svhs = svhs[btv->c.nr];
3511        if (remote[btv->c.nr] != UNSET)
3512                btv->has_remote = remote[btv->c.nr];
3513
3514        if (bttv_tvcards[btv->c.type].has_radio)
3515                btv->has_radio = 1;
3516        if (bttv_tvcards[btv->c.type].has_remote)
3517                btv->has_remote = 1;
3518        if (!bttv_tvcards[btv->c.type].no_gpioirq)
3519                btv->gpioirq = 1;
3520        if (bttv_tvcards[btv->c.type].volume_gpio)
3521                btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio;
3522        if (bttv_tvcards[btv->c.type].audio_mode_gpio)
3523                btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio;
3524
3525        if (btv->tuner_type == TUNER_ABSENT)
3526                return;  /* no tuner or related drivers to load */
3527
3528        if (btv->has_saa6588 || saa6588[btv->c.nr]) {
3529                /* Probe for RDS receiver chip */
3530                static const unsigned short addrs[] = {
3531                        0x20 >> 1,
3532                        0x22 >> 1,
3533                        I2C_CLIENT_END
3534                };
3535                struct v4l2_subdev *sd;
3536
3537                sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3538                        &btv->c.i2c_adap, "saa6588", 0, addrs);
3539                btv->has_saa6588 = (sd != NULL);
3540        }
3541
3542        /* try to detect audio/fader chips */
3543
3544        /* First check if the user specified the audio chip via a module
3545           option. */
3546
3547        switch (audiodev[btv->c.nr]) {
3548        case -1:
3549                return; /* do not load any audio module */
3550
3551        case 0: /* autodetect */
3552                break;
3553
3554        case 1: {
3555                /* The user specified that we should probe for msp3400 */
3556                static const unsigned short addrs[] = {
3557                        I2C_ADDR_MSP3400 >> 1,
3558                        I2C_ADDR_MSP3400_ALT >> 1,
3559                        I2C_CLIENT_END
3560                };
3561
3562                btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3563                        &btv->c.i2c_adap, "msp3400", 0, addrs);
3564                if (btv->sd_msp34xx)
3565                        return;
3566                goto no_audio;
3567        }
3568
3569        case 2: {
3570                /* The user specified that we should probe for tda7432 */
3571                static const unsigned short addrs[] = {
3572                        I2C_ADDR_TDA7432 >> 1,
3573                        I2C_CLIENT_END
3574                };
3575
3576                if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3577                                &btv->c.i2c_adap, "tda7432", 0, addrs))
3578                        return;
3579                goto no_audio;
3580        }
3581
3582        case 3: {
3583                /* The user specified that we should probe for tvaudio */
3584                btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3585                        &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3586                if (btv->sd_tvaudio)
3587                        return;
3588                goto no_audio;
3589        }
3590
3591        default:
3592                pr_warn("%d: unknown audiodev value!\n", btv->c.nr);
3593                return;
3594        }
3595
3596        /* There were no overrides, so now we try to discover this through the
3597           card definition */
3598
3599        /* probe for msp3400 first: this driver can detect whether or not
3600           it really is a msp3400, so it will return NULL when the device
3601           found is really something else (e.g. a tea6300). */
3602        if (!bttv_tvcards[btv->c.type].no_msp34xx) {
3603                btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3604                        &btv->c.i2c_adap, "msp3400",
3605                        0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1));
3606        } else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
3607                btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3608                        &btv->c.i2c_adap, "msp3400",
3609                        0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1));
3610        }
3611
3612        /* If we found a msp34xx, then we're done. */
3613        if (btv->sd_msp34xx)
3614                return;
3615
3616        /* Now see if we can find one of the tvaudio devices. */
3617        btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3618                &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3619        if (btv->sd_tvaudio) {
3620                /* There may be two tvaudio chips on the card, so try to
3621                   find another. */
3622                v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3623                        &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3624        }
3625
3626        /* it might also be a tda7432. */
3627        if (!bttv_tvcards[btv->c.type].no_tda7432) {
3628                static const unsigned short addrs[] = {
3629                        I2C_ADDR_TDA7432 >> 1,
3630                        I2C_CLIENT_END
3631                };
3632
3633                btv->sd_tda7432 = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3634                                &btv->c.i2c_adap, "tda7432", 0, addrs);
3635                if (btv->sd_tda7432)
3636                        return;
3637        }
3638        if (btv->sd_tvaudio)
3639                return;
3640
3641no_audio:
3642        pr_warn("%d: audio absent, no audio device found!\n", btv->c.nr);
3643}
3644
3645
3646/* initialize the tuner */
3647void bttv_init_tuner(struct bttv *btv)
3648{
3649        int addr = ADDR_UNSET;
3650
3651        if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3652                addr = bttv_tvcards[btv->c.type].tuner_addr;
3653
3654        if (btv->tuner_type != TUNER_ABSENT) {
3655                struct tuner_setup tun_setup;
3656
3657                /* Load tuner module before issuing tuner config call! */
3658                if (btv->has_radio)
3659                        v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3660                                &btv->c.i2c_adap, "tuner",
3661                                0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
3662                v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3663                                &btv->c.i2c_adap, "tuner",
3664                                0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
3665                v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3666                                &btv->c.i2c_adap, "tuner",
3667                                0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
3668
3669                tun_setup.mode_mask = T_ANALOG_TV;
3670                tun_setup.type = btv->tuner_type;
3671                tun_setup.addr = addr;
3672
3673                if (btv->has_radio)
3674                        tun_setup.mode_mask |= T_RADIO;
3675
3676                bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
3677        }
3678
3679        if (btv->tda9887_conf) {
3680                struct v4l2_priv_tun_config tda9887_cfg;
3681
3682                tda9887_cfg.tuner = TUNER_TDA9887;
3683                tda9887_cfg.priv = &btv->tda9887_conf;
3684
3685                bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
3686        }
3687}
3688
3689/* ----------------------------------------------------------------------- */
3690
3691static void modtec_eeprom(struct bttv *btv)
3692{
3693        if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3694                btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3695                pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3696                        btv->c.nr, &eeprom_data[0x1e]);
3697        } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3698                btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3699                pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3700                        btv->c.nr, &eeprom_data[0x1e]);
3701        } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3702                btv->tuner_type=TUNER_PHILIPS_NTSC;
3703                pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3704                        btv->c.nr, &eeprom_data[0x1e]);
3705        } else {
3706                pr_info("%d: Modtec: Unknown TunerString: %s\n",
3707                        btv->c.nr, &eeprom_data[0x1e]);
3708        }
3709}
3710
3711static void hauppauge_eeprom(struct bttv *btv)
3712{
3713        struct tveeprom tv;
3714
3715        tveeprom_hauppauge_analog(&tv, eeprom_data);
3716        btv->tuner_type = tv.tuner_type;
3717        btv->has_radio  = tv.has_radio;
3718
3719        pr_info("%d: Hauppauge eeprom indicates model#%d\n",
3720                btv->c.nr, tv.model);
3721
3722        /*
3723         * Some of the 878 boards have duplicate PCI IDs. Switch the board
3724         * type based on model #.
3725         */
3726        if(tv.model == 64900) {
3727                pr_info("%d: Switching board type from %s to %s\n",
3728                        btv->c.nr,
3729                        bttv_tvcards[btv->c.type].name,
3730                        bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3731                btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3732        }
3733
3734        /* The 61334 needs the msp3410 to do the radio demod to get sound */
3735        if (tv.model == 61334)
3736                btv->radio_uses_msp_demodulator = 1;
3737}
3738
3739/* ----------------------------------------------------------------------- */
3740
3741static void bttv_tea575x_set_pins(struct snd_tea575x *tea, u8 pins)
3742{
3743        struct bttv *btv = tea->private_data;
3744        struct bttv_tea575x_gpio gpio = btv->tea_gpio;
3745        u16 val = 0;
3746
3747        val |= (pins & TEA575X_DATA) ? (1 << gpio.data) : 0;
3748        val |= (pins & TEA575X_CLK)  ? (1 << gpio.clk)  : 0;
3749        val |= (pins & TEA575X_WREN) ? (1 << gpio.wren) : 0;
3750
3751        gpio_bits((1 << gpio.data) | (1 << gpio.clk) | (1 << gpio.wren), val);
3752        if (btv->mbox_ior) {
3753                /* IOW and CSEL active */
3754                gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
3755                udelay(5);
3756                /* all inactive */
3757                gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3758                          btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3759        }
3760}
3761
3762static u8 bttv_tea575x_get_pins(struct snd_tea575x *tea)
3763{
3764        struct bttv *btv = tea->private_data;
3765        struct bttv_tea575x_gpio gpio = btv->tea_gpio;
3766        u8 ret = 0;
3767        u16 val;
3768
3769        if (btv->mbox_ior) {
3770                /* IOR and CSEL active */
3771                gpio_bits(btv->mbox_ior | btv->mbox_csel, 0);
3772                udelay(5);
3773        }
3774        val = gpio_read();
3775        if (btv->mbox_ior) {
3776                /* all inactive */
3777                gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3778                          btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3779        }
3780
3781        if (val & (1 << gpio.data))
3782                ret |= TEA575X_DATA;
3783        if (val & (1 << gpio.most))
3784                ret |= TEA575X_MOST;
3785
3786        return ret;
3787}
3788
3789static void bttv_tea575x_set_direction(struct snd_tea575x *tea, bool output)
3790{
3791        struct bttv *btv = tea->private_data;
3792        struct bttv_tea575x_gpio gpio = btv->tea_gpio;
3793        u32 mask = (1 << gpio.clk) | (1 << gpio.wren) | (1 << gpio.data) |
3794                   (1 << gpio.most);
3795
3796        if (output)
3797                gpio_inout(mask, (1 << gpio.data) | (1 << gpio.clk) |
3798                                 (1 << gpio.wren));
3799        else
3800                gpio_inout(mask, (1 << gpio.clk) | (1 << gpio.wren));
3801}
3802
3803static const struct snd_tea575x_ops bttv_tea_ops = {
3804        .set_pins = bttv_tea575x_set_pins,
3805        .get_pins = bttv_tea575x_get_pins,
3806        .set_direction = bttv_tea575x_set_direction,
3807};
3808
3809static int tea575x_init(struct bttv *btv)
3810{
3811        btv->tea.private_data = btv;
3812        btv->tea.ops = &bttv_tea_ops;
3813        if (!snd_tea575x_hw_init(&btv->tea)) {
3814                pr_info("%d: detected TEA575x radio\n", btv->c.nr);
3815                btv->tea.mute = false;
3816                return 0;
3817        }
3818
3819        btv->has_tea575x = 0;
3820        btv->has_radio = 0;
3821
3822        return -ENODEV;
3823}
3824
3825/* ----------------------------------------------------------------------- */
3826
3827static int terratec_active_radio_upgrade(struct bttv *btv)
3828{
3829        btv->has_radio    = 1;
3830        btv->has_tea575x  = 1;
3831        btv->tea_gpio.wren = 4;
3832        btv->tea_gpio.most = 5;
3833        btv->tea_gpio.clk  = 3;
3834        btv->tea_gpio.data = 2;
3835
3836        btv->mbox_iow     = 1 <<  8;
3837        btv->mbox_ior     = 1 <<  9;
3838        btv->mbox_csel    = 1 << 10;
3839
3840        if (!tea575x_init(btv)) {
3841                pr_info("%d: Terratec Active Radio Upgrade found\n", btv->c.nr);
3842                btv->has_saa6588 = 1;
3843        }
3844
3845        return 0;
3846}
3847
3848
3849/* ----------------------------------------------------------------------- */
3850
3851/*
3852 * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3853 *
3854 * The hcwamc.rbf firmware file is on the Hauppauge driver CD.  Have
3855 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3856 * unpacked with unzip).
3857 */
3858#define PVR_GPIO_DELAY          10
3859
3860#define BTTV_ALT_DATA           0x000001
3861#define BTTV_ALT_DCLK           0x100000
3862#define BTTV_ALT_NCONFIG        0x800000
3863
3864static int pvr_altera_load(struct bttv *btv, const u8 *micro, u32 microlen)
3865{
3866        u32 n;
3867        u8 bits;
3868        int i;
3869
3870        gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3871        gpio_write(0);
3872        udelay(PVR_GPIO_DELAY);
3873
3874        gpio_write(BTTV_ALT_NCONFIG);
3875        udelay(PVR_GPIO_DELAY);
3876
3877        for (n = 0; n < microlen; n++) {
3878                bits = micro[n];
3879                for (i = 0 ; i < 8 ; i++) {
3880                        gpio_bits(BTTV_ALT_DCLK,0);
3881                        if (bits & 0x01)
3882                                gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3883                        else
3884                                gpio_bits(BTTV_ALT_DATA,0);
3885                        gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3886                        bits >>= 1;
3887                }
3888        }
3889        gpio_bits(BTTV_ALT_DCLK,0);
3890        udelay(PVR_GPIO_DELAY);
3891
3892        /* begin Altera init loop (Not necessary,but doesn't hurt) */
3893        for (i = 0 ; i < 30 ; i++) {
3894                gpio_bits(BTTV_ALT_DCLK,0);
3895                gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3896        }
3897        gpio_bits(BTTV_ALT_DCLK,0);
3898        return 0;
3899}
3900
3901static int pvr_boot(struct bttv *btv)
3902{
3903        const struct firmware *fw_entry;
3904        int rc;
3905
3906        rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3907        if (rc != 0) {
3908                pr_warn("%d: no altera firmware [via hotplug]\n", btv->c.nr);
3909                return rc;
3910        }
3911        rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3912        pr_info("%d: altera firmware upload %s\n",
3913                btv->c.nr, (rc < 0) ? "failed" : "ok");
3914        release_firmware(fw_entry);
3915        return rc;
3916}
3917
3918/* ----------------------------------------------------------------------- */
3919/* some osprey specific stuff                                              */
3920
3921static void osprey_eeprom(struct bttv *btv, const u8 ee[256])
3922{
3923        int i;
3924        u32 serial = 0;
3925        int cardid = -1;
3926
3927        /* This code will never actually get called in this case.... */
3928        if (btv->c.type == BTTV_BOARD_UNKNOWN) {
3929                /* this might be an antique... check for MMAC label in eeprom */
3930                if (!strncmp(ee, "MMAC", 4)) {
3931                        u8 checksum = 0;
3932                        for (i = 0; i < 21; i++)
3933                                checksum += ee[i];
3934                        if (checksum != ee[21])
3935                                return;
3936                        cardid = BTTV_BOARD_OSPREY1x0_848;
3937                        for (i = 12; i < 21; i++) {
3938                                serial *= 10;
3939                                serial += ee[i] - '0';
3940                        }
3941                }
3942        } else {
3943                unsigned short type;
3944
3945                for (i = 4 * 16; i < 8 * 16; i += 16) {
3946                        u16 checksum = (__force u16)ip_compute_csum(ee + i, 16);
3947
3948                        if ((checksum & 0xff) + (checksum >> 8) == 0xff)
3949                                break;
3950                }
3951                if (i >= 8*16)
3952                        return;
3953                ee += i;
3954
3955                /* found a valid descriptor */
3956                type = get_unaligned_be16((__be16 *)(ee+4));
3957
3958                switch(type) {
3959                /* 848 based */
3960                case 0x0004:
3961                        cardid = BTTV_BOARD_OSPREY1x0_848;
3962                        break;
3963                case 0x0005:
3964                        cardid = BTTV_BOARD_OSPREY101_848;
3965                        break;
3966
3967                /* 878 based */
3968                case 0x0012:
3969                case 0x0013:
3970                        cardid = BTTV_BOARD_OSPREY1x0;
3971                        break;
3972                case 0x0014:
3973                case 0x0015:
3974                        cardid = BTTV_BOARD_OSPREY1x1;
3975                        break;
3976                case 0x0016:
3977                case 0x0017:
3978                case 0x0020:
3979                        cardid = BTTV_BOARD_OSPREY1x1_SVID;
3980                        break;
3981                case 0x0018:
3982                case 0x0019:
3983                case 0x001E:
3984                case 0x001F:
3985                        cardid = BTTV_BOARD_OSPREY2xx;
3986                        break;
3987                case 0x001A:
3988                case 0x001B:
3989                        cardid = BTTV_BOARD_OSPREY2x0_SVID;
3990                        break;
3991                case 0x0040:
3992                        cardid = BTTV_BOARD_OSPREY500;
3993                        break;
3994                case 0x0050:
3995                case 0x0056:
3996                        cardid = BTTV_BOARD_OSPREY540;
3997                        /* bttv_osprey_540_init(btv); */
3998                        break;
3999                case 0x0060:
4000                case 0x0070:
4001                case 0x00A0:
4002                        cardid = BTTV_BOARD_OSPREY2x0;
4003                        /* enable output on select control lines */
4004                        gpio_inout(0xffffff,0x000303);
4005                        break;
4006                case 0x00D8:
4007                        cardid = BTTV_BOARD_OSPREY440;
4008                        break;
4009                default:
4010                        /* unknown...leave generic, but get serial # */
4011                        pr_info("%d: osprey eeprom: unknown card type 0x%04x\n",
4012                                btv->c.nr, type);
4013                        break;
4014                }
4015                serial = get_unaligned_be32((__be32 *)(ee+6));
4016        }
4017
4018        pr_info("%d: osprey eeprom: card=%d '%s' serial=%u\n",
4019                btv->c.nr, cardid,
4020                cardid > 0 ? bttv_tvcards[cardid].name : "Unknown", serial);
4021
4022        if (cardid<0 || btv->c.type == cardid)
4023                return;
4024
4025        /* card type isn't set correctly */
4026        if (card[btv->c.nr] < bttv_num_tvcards) {
4027                pr_warn("%d: osprey eeprom: Not overriding user specified card type\n",
4028                        btv->c.nr);
4029        } else {
4030                pr_info("%d: osprey eeprom: Changing card type from %d to %d\n",
4031                        btv->c.nr, btv->c.type, cardid);
4032                btv->c.type = cardid;
4033        }
4034}
4035
4036/* ----------------------------------------------------------------------- */
4037/* AVermedia specific stuff, from  bktr_card.c                             */
4038
4039static int tuner_0_table[] = {
4040        TUNER_PHILIPS_NTSC,  TUNER_PHILIPS_PAL /* PAL-BG*/,
4041        TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL /* PAL-I*/,
4042        TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL,
4043        TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
4044        TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
4045        TUNER_PHILIPS_FM1216ME_MK3 };
4046
4047static int tuner_1_table[] = {
4048        TUNER_TEMIC_NTSC,  TUNER_TEMIC_PAL,
4049        TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
4050        TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
4051        TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
4052        TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
4053
4054static void avermedia_eeprom(struct bttv *btv)
4055{
4056        int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
4057
4058        tuner_make      = (eeprom_data[0x41] & 0x7);
4059        tuner_tv_fm     = (eeprom_data[0x41] & 0x18) >> 3;
4060        tuner_format    = (eeprom_data[0x42] & 0xf0) >> 4;
4061        btv->has_remote = (eeprom_data[0x42] & 0x01);
4062
4063        if (tuner_make == 0 || tuner_make == 2)
4064                if (tuner_format <= 0x0a)
4065                        tuner_type = tuner_0_table[tuner_format];
4066        if (tuner_make == 1)
4067                if (tuner_format <= 9)
4068                        tuner_type = tuner_1_table[tuner_format];
4069
4070        if (tuner_make == 4)
4071                if (tuner_format == 0x09)
4072                        tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
4073
4074        pr_info("%d: Avermedia eeprom[0x%02x%02x]: tuner=",
4075                btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
4076        if (tuner_type) {
4077                btv->tuner_type = tuner_type;
4078                pr_cont("%d", tuner_type);
4079        } else
4080                pr_cont("Unknown type");
4081        pr_cont(