linux/drivers/iio/magnetometer/Kconfig
<<
>>
Prefs
   1# SPDX-License-Identifier: GPL-2.0-only
   2#
   3# Magnetometer sensors
   4#
   5# When adding new entries keep the list in alphabetical order
   6
   7menu "Magnetometer sensors"
   8
   9config AK8974
  10        tristate "Asahi Kasei AK8974 3-Axis Magnetometer"
  11        depends on I2C
  12        depends on OF
  13        select REGMAP_I2C
  14        select IIO_BUFFER
  15        select IIO_TRIGGERED_BUFFER
  16        help
  17          Say yes here to build support for Asahi Kasei AK8974, AMI305 or
  18          AMI306 I2C-based 3-axis magnetometer chips.
  19
  20          To compile this driver as a module, choose M here: the module
  21          will be called ak8974.
  22
  23config AK8975
  24        tristate "Asahi Kasei AK8975 3-Axis Magnetometer"
  25        depends on I2C
  26        depends on GPIOLIB || COMPILE_TEST
  27        select IIO_BUFFER
  28        select IIO_TRIGGERED_BUFFER
  29        help
  30          Say yes here to build support for Asahi Kasei AK8975, AK8963,
  31          AK09911 or AK09912 3-Axis Magnetometer.
  32
  33          To compile this driver as a module, choose M here: the module
  34          will be called ak8975.
  35
  36config AK09911
  37        tristate "Asahi Kasei AK09911 3-axis Compass"
  38        depends on I2C
  39        depends on GPIOLIB || COMPILE_TEST
  40        select AK8975
  41        help
  42          Deprecated: AK09911 is now supported by AK8975 driver.
  43
  44config BMC150_MAGN
  45        tristate
  46        select IIO_BUFFER
  47        select IIO_TRIGGERED_BUFFER
  48
  49config BMC150_MAGN_I2C
  50        tristate "Bosch BMC150 I2C Magnetometer Driver"
  51        depends on I2C
  52        select BMC150_MAGN
  53        select REGMAP_I2C
  54        help
  55          Say yes here to build support for the BMC150 magnetometer with
  56          I2C interface.
  57
  58          This is a combo module with both accelerometer and magnetometer.
  59          This driver is only implementing magnetometer part, which has
  60          its own address and register map.
  61
  62          This driver also supports I2C Bosch BMC156 and BMM150 chips.
  63          To compile this driver as a module, choose M here: the module will be
  64          called bmc150_magn_i2c.
  65
  66config BMC150_MAGN_SPI
  67        tristate "Bosch BMC150 SPI Magnetometer Driver"
  68        depends on SPI
  69        select BMC150_MAGN
  70        select REGMAP_SPI
  71        help
  72          Say yes here to build support for the BMC150 magnetometer with
  73          SPI interface.
  74
  75          This is a combo module with both accelerometer and magnetometer.
  76          This driver is only implementing magnetometer part, which has
  77          its own address and register map.
  78
  79          This driver also supports SPI Bosch BMC156 and BMM150 chips.
  80          To compile this driver as a module, choose M here: the module will be
  81          called bmc150_magn_spi.
  82
  83config MAG3110
  84        tristate "Freescale MAG3110 3-Axis Magnetometer"
  85        depends on I2C
  86        select IIO_BUFFER
  87        select IIO_TRIGGERED_BUFFER
  88        help
  89          Say yes here to build support for the Freescale MAG3110 3-Axis
  90          magnetometer.
  91
  92          To compile this driver as a module, choose M here: the module
  93          will be called mag3110.
  94
  95config HID_SENSOR_MAGNETOMETER_3D
  96        depends on HID_SENSOR_HUB
  97        select IIO_BUFFER
  98        select HID_SENSOR_IIO_COMMON
  99        select HID_SENSOR_IIO_TRIGGER
 100        tristate "HID Magenetometer 3D"
 101        help
 102          Say yes here to build support for the HID SENSOR
 103          Magnetometer 3D.
 104
 105config MMC35240
 106        tristate "MEMSIC MMC35240 3-axis magnetic sensor"
 107        select REGMAP_I2C
 108        depends on I2C
 109        help
 110          Say yes here to build support for the MEMSIC MMC35240 3-axis
 111          magnetic sensor.
 112
 113          To compile this driver as a module, choose M here: the module
 114          will be called mmc35240.
 115
 116config IIO_ST_MAGN_3AXIS
 117        tristate "STMicroelectronics magnetometers 3-Axis Driver"
 118        depends on (I2C || SPI_MASTER) && SYSFS
 119        select IIO_ST_SENSORS_CORE
 120        select IIO_ST_MAGN_I2C_3AXIS if (I2C)
 121        select IIO_ST_MAGN_SPI_3AXIS if (SPI_MASTER)
 122        select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
 123        help
 124          Say yes here to build support for STMicroelectronics magnetometers:
 125          LSM303DLHC, LSM303DLM, LIS3MDL.
 126
 127          This driver can also be built as a module. If so, these modules
 128          will be created:
 129          - st_magn (core functions for the driver [it is mandatory]);
 130          - st_magn_i2c (necessary for the I2C devices [optional*]);
 131          - st_magn_spi (necessary for the SPI devices [optional*]);
 132
 133          (*) one of these is necessary to do something.
 134
 135config IIO_ST_MAGN_I2C_3AXIS
 136        tristate
 137        depends on IIO_ST_MAGN_3AXIS
 138        depends on IIO_ST_SENSORS_I2C
 139
 140config IIO_ST_MAGN_SPI_3AXIS
 141        tristate
 142        depends on IIO_ST_MAGN_3AXIS
 143        depends on IIO_ST_SENSORS_SPI
 144
 145config SENSORS_HMC5843
 146        tristate
 147        select IIO_BUFFER
 148        select IIO_TRIGGERED_BUFFER
 149
 150config SENSORS_HMC5843_I2C
 151        tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer (I2C)"
 152        depends on I2C
 153        select SENSORS_HMC5843
 154        select REGMAP_I2C
 155        help
 156          Say Y here to add support for the Honeywell HMC5843, HMC5883 and
 157          HMC5883L 3-Axis Magnetometer (digital compass).
 158
 159          This driver can also be compiled as a set of modules.
 160          If so, these modules will be created:
 161          - hmc5843_core (core functions)
 162          - hmc5843_i2c (support for HMC5843, HMC5883, HMC5883L and HMC5983)
 163
 164config SENSORS_HMC5843_SPI
 165        tristate "Honeywell HMC5983 3-Axis Magnetometer (SPI)"
 166        depends on SPI_MASTER
 167        select SENSORS_HMC5843
 168        select REGMAP_SPI
 169        help
 170          Say Y here to add support for the Honeywell HMC5983 3-Axis Magnetometer
 171          (digital compass).
 172
 173          This driver can also be compiled as a set of modules.
 174          If so, these modules will be created:
 175          - hmc5843_core (core functions)
 176          - hmc5843_spi (support for HMC5983)
 177
 178config SENSORS_RM3100
 179        tristate
 180        select IIO_BUFFER
 181        select IIO_TRIGGERED_BUFFER
 182
 183config SENSORS_RM3100_I2C
 184        tristate "PNI RM3100 3-Axis Magnetometer (I2C)"
 185        depends on I2C
 186        select SENSORS_RM3100
 187        select REGMAP_I2C
 188        help
 189          Say Y here to add support for the PNI RM3100 3-Axis Magnetometer.
 190
 191          This driver can also be compiled as a module.
 192          To compile this driver as a module, choose M here: the module
 193          will be called rm3100-i2c.
 194
 195config SENSORS_RM3100_SPI
 196        tristate "PNI RM3100 3-Axis Magnetometer (SPI)"
 197        depends on SPI_MASTER
 198        select SENSORS_RM3100
 199        select REGMAP_SPI
 200        help
 201          Say Y here to add support for the PNI RM3100 3-Axis Magnetometer.
 202
 203          This driver can also be compiled as a module.
 204          To compile this driver as a module, choose M here: the module
 205          will be called rm3100-spi.
 206
 207config YAMAHA_YAS530
 208        tristate "Yamaha YAS530 family of 3-Axis Magnetometers (I2C)"
 209        depends on I2C
 210        select REGMAP_I2C
 211        select IIO_BUFFER
 212        select IIO_TRIGGERED_BUFFER
 213        help
 214          Say Y here to add support for the Yamaha YAS530 series of
 215          3-Axis Magnetometers. Right now YAS530, YAS532 and YAS533 are
 216          fully supported.
 217
 218          This driver can also be compiled as a module.
 219          To compile this driver as a module, choose M here: the module
 220          will be called yamaha-yas.
 221
 222endmenu
 223