LXR linux/arch/mips/boot/dts/qca/ar9331_dragino

   1// SPDX-License-Identifier: GPL-2.0
   2/dts-v1/;
   3
   4#include <dt-bindings/gpio/gpio.h>
   5#include <dt-bindings/input/input.h>
   6
   7#include "ar9331.dtsi"
   8
   9/ {
  10        model = "Dragino MS14 (Dragino 2)";
  11        compatible = "dragino,ms14";
  12
  13        aliases {
  14                serial0 = &uart;
  15        };
  16
  17        memory@0 {
  18                device_type = "memory";
  19                reg = <0x0 0x4000000>;
  20        };
  21
  22        leds {
  23                compatible = "gpio-leds";
  24
  25                wlan {
  26                        label = "dragino2:red:wlan";
  27                        gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  28                        default-state = "off";
  29                };
  30
  31                lan {
  32                        label = "dragino2:red:lan";
  33                        gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  34                        default-state = "off";
  35                };
  36
  37                wan {
  38                        label = "dragino2:red:wan";
  39                        gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  40                        default-state = "off";
  41                };
  42
  43                system {
  44                        label = "dragino2:red:system";
  45                        gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
  46                        default-state = "off";
  47                };
  48        };
  49
  50        gpio-keys {
  51                compatible = "gpio-keys";
  52                #address-cells = <1>;
  53                #size-cells = <0>;
  54
  55                button@0 {
  56                        label = "jumpstart";
  57                        linux,code = <KEY_WPS_BUTTON>;
  58                        gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  59                };
  60
  61                button@1 {
  62                        label = "reset";
  63                        linux,code = <KEY_RESTART>;
  64                        gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  65                };
  66        };
  67};
  68
  69&ref {
  70        clock-frequency = <25000000>;
  71};
  72
  73&uart {
  74        status = "okay";
  75};
  76
  77&gpio {
  78        status = "okay";
  79};
  80
  81&usb {
  82        dr_mode = "host";
  83        status = "okay";
  84};
  85
  86&usb_phy {
  87        status = "okay";
  88};
  89
  90&spi {
  91        num-chipselects = <1>;
  92        status = "okay";
  93
  94        /* Winbond 25Q128BVFG SPI flash */
  95        spiflash: w25q128@0 {
  96                #address-cells = <1>;
  97                #size-cells = <1>;
  98                compatible = "winbond,w25q128", "jedec,spi-nor";
  99                spi-max-frequency = <104000000>;
 100                reg = <0>;
 101        };
 102};
 103