LXR linux/arch/mips/boot/dts/qca/ar9331_dpt

   1// SPDX-License-Identifier: GPL-2.0
   2/dts-v1/;
   3
   4#include <dt-bindings/gpio/gpio.h>
   5#include <dt-bindings/input/input.h>
   6#include <dt-bindings/leds/common.h>
   7
   8#include "ar9331.dtsi"
   9
  10/ {
  11        model = "DPTechnics DPT-Module";
  12        compatible = "dptechnics,dpt-module";
  13
  14        aliases {
  15                serial0 = &uart;
  16        };
  17
  18        memory@0 {
  19                device_type = "memory";
  20                reg = <0x0 0x4000000>;
  21        };
  22
  23        leds {
  24                compatible = "gpio-leds";
  25
  26                led-0 {
  27                        function = LED_FUNCTION_STATUS;
  28                        color = <LED_COLOR_ID_GREEN>;
  29                        gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
  30                        default-state = "off";
  31                };
  32        };
  33
  34        gpio-keys {
  35                compatible = "gpio-keys";
  36                #address-cells = <1>;
  37                #size-cells = <0>;
  38
  39                button@0 {
  40                        label = "reset";
  41                        linux,code = <KEY_RESTART>;
  42                        gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  43                };
  44        };
  45};
  46
  47&ref {
  48        clock-frequency = <25000000>;
  49};
  50
  51&uart {
  52        status = "okay";
  53};
  54
  55&gpio {
  56        status = "okay";
  57};
  58
  59&usb {
  60        dr_mode = "host";
  61        status = "okay";
  62};
  63
  64&usb_phy {
  65        status = "okay";
  66};
  67
  68&spi {
  69        num-chipselects = <1>;
  70        status = "okay";
  71
  72        /* Winbond 25Q128FVSG SPI flash */
  73        spiflash: w25q128@0 {
  74                #address-cells = <1>;
  75                #size-cells = <1>;
  76                compatible = "winbond,w25q128", "jedec,spi-nor";
  77                spi-max-frequency = <104000000>;
  78                reg = <0>;
  79        };
  80};
  81
  82&eth0 {
  83        status = "okay";
  84};
  85
  86&eth1 {
  87        status = "okay";
  88};
  89
  90&switch_port1 {
  91        label = "lan0";
  92        status = "okay";
  93};
  94
  95&phy_port0 {
  96        status = "okay";
  97};
  98
  99&phy_port4 {
 100        status = "okay";
 101};
 102