/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
 * Copyright(c) 2008 - 2009 Atheros Corporation. All rights reserved.
 *
 * Derived from Intel e1000 driver
 * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
 */

#ifndef _ATL1C_HW_H_
#define _ATL1C_HW_H_

#include <linux/types.h>
#include <linux/mii.h>

#define FIELD_GETX(_x, _name)   ((_x) >> (_name##_SHIFT) & (_name##_MASK))
#define FIELD_SETX(_x, _name, _v) \
(((_x) & ~((_name##_MASK) << (_name##_SHIFT))) |\
(((_v) & (_name##_MASK)) << (_name##_SHIFT)))
#define FIELDX(_name, _v) (((_v) & (_name##_MASK)) << (_name##_SHIFT))

struct atl1c_adapter;
struct atl1c_hw;

/* function prototype */
void atl1c_phy_disable(struct atl1c_hw *hw);
void atl1c_hw_set_mac_addr(struct atl1c_hw *hw, u8 *mac_addr);
int atl1c_phy_reset(struct atl1c_hw *hw);
int atl1c_read_mac_addr(struct atl1c_hw *hw);
bool atl1c_get_link_status(struct atl1c_hw *hw);
int atl1c_get_speed_and_duplex(struct atl1c_hw *hw, u16 *speed, u16 *duplex);
u32 atl1c_hash_mc_addr(struct atl1c_hw *hw, u8 *mc_addr);
void atl1c_hash_set(struct atl1c_hw *hw, u32 hash_value);
int atl1c_read_phy_reg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data);
int atl1c_write_phy_reg(struct atl1c_hw *hw, u32 reg_addr, u16 phy_data);
bool atl1c_read_eeprom(struct atl1c_hw *hw, u32 offset, u32 *p_value);
int atl1c_phy_init(struct atl1c_hw *hw);
int atl1c_check_eeprom_exist(struct atl1c_hw *hw);
int atl1c_restart_autoneg(struct atl1c_hw *hw);
int atl1c_phy_to_ps_link(struct atl1c_hw *hw);
int atl1c_power_saving(struct atl1c_hw *hw, u32 wufc);
bool atl1c_wait_mdio_idle(struct atl1c_hw *hw);
void atl1c_stop_phy_polling(struct atl1c_hw *hw);
void atl1c_start_phy_polling(struct atl1c_hw *hw, u16 clk_sel);
int atl1c_read_phy_core(struct atl1c_hw *hw, bool ext, u8 dev,
                        u16 reg, u16 *phy_data);
int atl1c_write_phy_core(struct atl1c_hw *hw, bool ext, u8 dev,
                        u16 reg, u16 phy_data);
int atl1c_read_phy_ext(struct atl1c_hw *hw, u8 dev_addr,
                        u16 reg_addr, u16 *phy_data);
int atl1c_write_phy_ext(struct atl1c_hw *hw, u8 dev_addr,
                        u16 reg_addr, u16 phy_data);
int atl1c_read_phy_dbg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data);
int atl1c_write_phy_dbg(struct atl1c_hw *hw, u16 reg_addr, u16 phy_data);
void atl1c_post_phy_linkchg(struct atl1c_hw *hw, u16 link_speed);

/* hw-ids */
#define PCI_DEVICE_ID_ATTANSIC_L2C      0x1062
#define PCI_DEVICE_ID_ATTANSIC_L1C      0x1063
#define PCI_DEVICE_ID_ATHEROS_L2C_B     0x2060 /* AR8152 v1.1 Fast 10/100 */
#define PCI_DEVICE_ID_ATHEROS_L2C_B2    0x2062 /* AR8152 v2.0 Fast 10/100 */
#define PCI_DEVICE_ID_ATHEROS_L1D       0x1073 /* AR8151 v1.0 Gigabit 1000 */
#define PCI_DEVICE_ID_ATHEROS_L1D_2_0   0x1083 /* AR8151 v2.0 Gigabit 1000 */
#define L2CB_V10                        0xc0
#define L2CB_V11                        0xc1
#define L2CB_V20                        0xc0
#define L2CB_V21                        0xc1

/* register definition */
#define REG_DEVICE_CAP                  0x5C
#define DEVICE_CAP_MAX_PAYLOAD_MASK     0x7
#define DEVICE_CAP_MAX_PAYLOAD_SHIFT    0

#define DEVICE_CTRL_MAXRRS_MIN          2

#define REG_LINK_CTRL                   0x68
#define LINK_CTRL_L0S_EN                0x01
#define LINK_CTRL_L1_EN                 0x02
#define LINK_CTRL_EXT_SYNC              0x80

#define REG_PCIE_IND_ACC_ADDR           0x80
#define REG_PCIE_IND_ACC_DATA           0x84

#define REG_DEV_SERIALNUM_CTRL          0x200
#define REG_DEV_MAC_SEL_MASK            0x0 /* 0:EUI; 1:MAC */
#define REG_DEV_MAC_SEL_SHIFT           0
#define REG_DEV_SERIAL_NUM_EN_MASK      0x1
#define REG_DEV_SERIAL_NUM_EN_SHIFT     1

#define REG_TWSI_CTRL                   0x218
#define TWSI_CTLR_FREQ_MASK             0x3UL
#define TWSI_CTRL_FREQ_SHIFT            24
#define TWSI_CTRL_FREQ_100K             0
#define TWSI_CTRL_FREQ_200K             1
#define TWSI_CTRL_FREQ_300K             2
#define TWSI_CTRL_FREQ_400K             3
#define TWSI_CTRL_LD_EXIST              BIT(23)
#define TWSI_CTRL_HW_LDSTAT             BIT(12) /* 0:finish,1:in progress */
#define TWSI_CTRL_SW_LDSTART            BIT(11)
#define TWSI_CTRL_LD_OFFSET_MASK        0xFF
#define TWSI_CTRL_LD_OFFSET_SHIFT       0

#define REG_PCIE_DEV_MISC_CTRL          0x21C
#define PCIE_DEV_MISC_EXT_PIPE          0x2
#define PCIE_DEV_MISC_RETRY_BUFDIS      0x1
#define PCIE_DEV_MISC_SPIROM_EXIST      0x4
#define PCIE_DEV_MISC_SERDES_ENDIAN     0x8
#define PCIE_DEV_MISC_SERDES_SEL_DIN    0x10

#define REG_PCIE_PHYMISC                0x1000
#define PCIE_PHYMISC_FORCE_RCV_DET      BIT(2)
#define PCIE_PHYMISC_NFTS_MASK          0xFFUL
#define PCIE_PHYMISC_NFTS_SHIFT         16

#define REG_PCIE_PHYMISC2               0x1004
#define PCIE_PHYMISC2_L0S_TH_MASK       0x3UL
#define PCIE_PHYMISC2_L0S_TH_SHIFT      18
#define L2CB1_PCIE_PHYMISC2_L0S_TH      3
#define PCIE_PHYMISC2_CDR_BW_MASK       0x3UL
#define PCIE_PHYMISC2_CDR_BW_SHIFT      16
#define L2CB1_PCIE_PHYMISC2_CDR_BW      3

#define REG_TWSI_DEBUG                  0x1108
#define TWSI_DEBUG_DEV_EXIST            BIT(29)

#define REG_DMA_DBG                     0x1114
#define DMA_DBG_VENDOR_MSG              BIT(0)

#define REG_EEPROM_CTRL                 0x12C0
#define EEPROM_CTRL_DATA_HI_MASK        0xFFFF
#define EEPROM_CTRL_DATA_HI_SHIFT       0
#define EEPROM_CTRL_ADDR_MASK           0x3FF
#define EEPROM_CTRL_ADDR_SHIFT          16
#define EEPROM_CTRL_ACK                 0x40000000
#define EEPROM_CTRL_RW                  0x80000000

#define REG_EEPROM_DATA_LO              0x12C4

#define REG_OTP_CTRL                    0x12F0
#define OTP_CTRL_CLK_EN                 BIT(1)

#define REG_PM_CTRL                     0x12F8
#define PM_CTRL_HOTRST                  BIT(31)
#define PM_CTRL_MAC_ASPM_CHK            BIT(30) /* L0s/L1 dis by MAC based on
                                                 * thrghput(setting in 15A0) */
#define PM_CTRL_SA_DLY_EN               BIT(29)
#define PM_CTRL_L0S_BUFSRX_EN           BIT(28)
#define PM_CTRL_LCKDET_TIMER_MASK       0xFUL
#define PM_CTRL_LCKDET_TIMER_SHIFT      24
#define PM_CTRL_LCKDET_TIMER_DEF        0xC
#define PM_CTRL_PM_REQ_TIMER_MASK       0xFUL
#define PM_CTRL_PM_REQ_TIMER_SHIFT      20      /* pm_request_l1 time > @
                                                 * ->L0s not L1 */
#define PM_CTRL_PM_REQ_TO_DEF           0xF
#define PMCTRL_TXL1_AFTER_L0S           BIT(19) /* l1dv2.0+ */
#define L1D_PMCTRL_L1_ENTRY_TM_MASK     7UL     /* l1dv2.0+, 3bits */
#define L1D_PMCTRL_L1_ENTRY_TM_SHIFT    16
#define L1D_PMCTRL_L1_ENTRY_TM_DIS      0
#define L1D_PMCTRL_L1_ENTRY_TM_2US      1
#define L1D_PMCTRL_L1_ENTRY_TM_4US      2
#define L1D_PMCTRL_L1_ENTRY_TM_8US      3
#define L1D_PMCTRL_L1_ENTRY_TM_16US     4
#define L1D_PMCTRL_L1_ENTRY_TM_24US     5
#define L1D_PMCTRL_L1_ENTRY_TM_32US     6
#define L1D_PMCTRL_L1_ENTRY_TM_63US     7
#define PM_CTRL_L1_ENTRY_TIMER_MASK     0xFUL  /* l1C 4bits */
#define PM_CTRL_L1_ENTRY_TIMER_SHIFT    16
#define L2CB1_PM_CTRL_L1_ENTRY_TM       7
#define L1C_PM_CTRL_L1_ENTRY_TM         0xF
#define PM_CTRL_RCVR_WT_TIMER           BIT(15) /* 1:1us, 0:2ms */
#define PM_CTRL_CLK_PWM_VER1_1          BIT(14) /* 0:1.0a,1:1.1 */
#define PM_CTRL_CLK_SWH_L1              BIT(13) /* en pcie clk sw in L1 */
#define PM_CTRL_ASPM_L0S_EN             BIT(12)
#define PM_CTRL_RXL1_AFTER_L0S          BIT(11) /* l1dv2.0+ */
#define L1D_PMCTRL_L0S_TIMER_MASK       7UL     /* l1d2.0+, 3bits*/
#define L1D_PMCTRL_L0S_TIMER_SHIFT      8
#define PM_CTRL_L0S_ENTRY_TIMER_MASK    0xFUL   /* l1c, 4bits */
#define PM_CTRL_L0S_ENTRY_TIMER_SHIFT   8
#define PM_CTRL_SERDES_BUFS_RX_L1_EN    BIT(7)
#define PM_CTRL_SERDES_PD_EX_L1         BIT(6)  /* power down serdes rx */
#define PM_CTRL_SERDES_PLL_L1_EN        BIT(5)
#define PM_CTRL_SERDES_L1_EN            BIT(4)
#define PM_CTRL_ASPM_L1_EN              BIT(3)
#define PM_CTRL_CLK_REQ_EN              BIT(2)
#define PM_CTRL_RBER_EN                 BIT(1)
#define PM_CTRL_SPRSDWER_EN             BIT(0)

#define REG_LTSSM_ID_CTRL               0x12FC
#define LTSSM_ID_EN_WRO                 0x1000


/* Selene Master Control Register */
#define REG_MASTER_CTRL                 0x1400
#define MASTER_CTRL_OTP_SEL             BIT(31)
#define MASTER_DEV_NUM_MASK             0x7FUL
#define MASTER_DEV_NUM_SHIFT            24
#define MASTER_REV_NUM_MASK             0xFFUL
#define MASTER_REV_NUM_SHIFT            16
#define MASTER_CTRL_INT_RDCLR           BIT(14)
#define MASTER_CTRL_CLK_SEL_DIS         BIT(12) /* 1:alwys sel pclk from
                                                 * serdes, not sw to 25M */
#define MASTER_CTRL_RX_ITIMER_EN        BIT(11) /* IRQ MODURATION FOR RX */
#define MASTER_CTRL_TX_ITIMER_EN        BIT(10) /* MODURATION FOR TX/RX */
#define MASTER_CTRL_MANU_INT            BIT(9)  /* SOFT MANUAL INT */
#define MASTER_CTRL_MANUTIMER_EN        BIT(8)
#define MASTER_CTRL_SA_TIMER_EN         BIT(7)  /* SYS ALIVE TIMER EN */
#define MASTER_CTRL_OOB_DIS             BIT(6)  /* OUT OF BOX DIS */
#define MASTER_CTRL_WAKEN_25M           BIT(5)  /* WAKE WO. PCIE CLK */
#define MASTER_CTRL_BERT_START          BIT(4)
#define MASTER_PCIE_TSTMOD_MASK         3UL
#define MASTER_PCIE_TSTMOD_SHIFT        2
#define MASTER_PCIE_RST                 BIT(1)
#define MASTER_CTRL_SOFT_RST            BIT(0)  /* RST MAC & DMA */
#define DMA_MAC_RST_TO                  50

/* Timer Initial Value Register */
#define REG_MANUAL_TIMER_INIT           0x1404

/* IRQ ModeratorTimer Initial Value Register */
#define REG_IRQ_MODRT_TIMER_INIT        0x1408
#define IRQ_MODRT_TIMER_MASK            0xffff
#define IRQ_MODRT_TX_TIMER_SHIFT        0
#define IRQ_MODRT_RX_TIMER_SHIFT        16

#define REG_GPHY_CTRL                   0x140C
#define GPHY_CTRL_ADDR_MASK             0x1FUL
#define GPHY_CTRL_ADDR_SHIFT            19
#define GPHY_CTRL_BP_VLTGSW             BIT(18)
#define GPHY_CTRL_100AB_EN              BIT(17)
#define GPHY_CTRL_10AB_EN               BIT(16)
#define GPHY_CTRL_PHY_PLL_BYPASS        BIT(15)
#define GPHY_CTRL_PWDOWN_HW             BIT(14) /* affect MAC&PHY, to low pw */
#define GPHY_CTRL_PHY_PLL_ON            BIT(13) /* 1:pll always on, 0:can sw */
#define GPHY_CTRL_SEL_ANA_RST           BIT(12)
#define GPHY_CTRL_HIB_PULSE             BIT(11)
#define GPHY_CTRL_HIB_EN                BIT(10)
#define GPHY_CTRL_GIGA_DIS              BIT(9)
#define GPHY_CTRL_PHY_IDDQ_DIS          BIT(8)  /* pw on RST */
#define GPHY_CTRL_PHY_IDDQ              BIT(7)  /* bit8 affect bit7 while rb */
#define GPHY_CTRL_LPW_EXIT              BIT(6)
#define GPHY_CTRL_GATE_25M_EN           BIT(5)
#define GPHY_CTRL_REV_ANEG              BIT(4)
#define GPHY_CTRL_ANEG_NOW              BIT(3)
#define GPHY_CTRL_LED_MODE              BIT(2)
#define GPHY_CTRL_RTL_MODE              BIT(1)
#define GPHY_CTRL_EXT_RESET             BIT(0)  /* 1:out of DSP RST status */
#define GPHY_CTRL_EXT_RST_TO            80      /* 800us atmost */
#define GPHY_CTRL_CLS                   (\
        GPHY_CTRL_LED_MODE              |\
        GPHY_CTRL_100AB_EN              |\
        GPHY_CTRL_PHY_PLL_ON)

/* Block IDLE Status Register */
#define REG_IDLE_STATUS                 0x1410
#define IDLE_STATUS_SFORCE_MASK         0xFUL
#define IDLE_STATUS_SFORCE_SHIFT        14
#define IDLE_STATUS_CALIB_DONE          BIT(13)
#define IDLE_STATUS_CALIB_RES_MASK      0x1FUL
#define IDLE_STATUS_CALIB_RES_SHIFT     8
#define IDLE_STATUS_CALIBERR_MASK       0xFUL
#define IDLE_STATUS_CALIBERR_SHIFT      4
#define IDLE_STATUS_TXQ_BUSY            BIT(3)
#define IDLE_STATUS_RXQ_BUSY            BIT(2)
#define IDLE_STATUS_TXMAC_BUSY          BIT(1)
#define IDLE_STATUS_RXMAC_BUSY          BIT(0)
#define IDLE_STATUS_MASK                (\
        IDLE_STATUS_TXQ_BUSY            |\
        IDLE_STATUS_RXQ_BUSY            |\
        IDLE_STATUS_TXMAC_BUSY          |\
        IDLE_STATUS_RXMAC_BUSY)

/* MDIO Control Register */
#define REG_MDIO_CTRL                   0x1414
#define MDIO_CTRL_MODE_EXT              BIT(30)
#define MDIO_CTRL_POST_READ             BIT(29)
#define MDIO_CTRL_AP_EN                 BIT(28)
#define MDIO_CTRL_BUSY                  BIT(27)
#define MDIO_CTRL_CLK_SEL_MASK          0x7UL
#define MDIO_CTRL_CLK_SEL_SHIFT         24
#define MDIO_CTRL_CLK_25_4              0       /* 25MHz divide 4 */
#define MDIO_CTRL_CLK_25_6              2
#define MDIO_CTRL_CLK_25_8              3
#define MDIO_CTRL_CLK_25_10             4
#define MDIO_CTRL_CLK_25_32             5
#define MDIO_CTRL_CLK_25_64             6
#define MDIO_CTRL_CLK_25_128            7
#define MDIO_CTRL_START                 BIT(23)
#define MDIO_CTRL_SPRES_PRMBL           BIT(22)
#define MDIO_CTRL_OP_READ               BIT(21) /* 1:read, 0:write */
#define MDIO_CTRL_REG_MASK              0x1FUL
#define MDIO_CTRL_REG_SHIFT             16
#define MDIO_CTRL_DATA_MASK             0xFFFFUL
#define MDIO_CTRL_DATA_SHIFT            0
#define MDIO_MAX_AC_TO                  120     /* 1.2ms timeout for slow clk */

/* for extension reg access */
#define REG_MDIO_EXTN                   0x1448
#define MDIO_EXTN_PORTAD_MASK           0x1FUL
#define MDIO_EXTN_PORTAD_SHIFT          21
#define MDIO_EXTN_DEVAD_MASK            0x1FUL
#define MDIO_EXTN_DEVAD_SHIFT           16
#define MDIO_EXTN_REG_MASK              0xFFFFUL
#define MDIO_EXTN_REG_SHIFT             0

/* BIST Control and Status Register0 (for the Packet Memory) */
#define REG_BIST0_CTRL                  0x141c
#define BIST0_NOW                       0x1
#define BIST0_SRAM_FAIL                 0x2 /* 1: The SRAM failure is
                                             * un-repairable  because
                                             * it has address decoder
                                             * failure or more than 1 cell
                                             * stuck-to-x failure */
#define BIST0_FUSE_FLAG                 0x4

/* BIST Control and Status Register1(for the retry buffer of PCI Express) */
#define REG_BIST1_CTRL                  0x1420
#define BIST1_NOW                       0x1
#define BIST1_SRAM_FAIL                 0x2
#define BIST1_FUSE_FLAG                 0x4

/* SerDes Lock Detect Control and Status Register */
#define REG_SERDES                      0x1424
#define SERDES_PHY_CLK_SLOWDOWN         BIT(18)
#define SERDES_MAC_CLK_SLOWDOWN         BIT(17)
#define SERDES_SELFB_PLL_MASK           0x3UL
#define SERDES_SELFB_PLL_SHIFT          14
#define SERDES_PHYCLK_SEL_GTX           BIT(13) /* 1:gtx_clk, 0:25M */
#define SERDES_PCIECLK_SEL_SRDS         BIT(12) /* 1:serdes,0:25M */
#define SERDES_BUFS_RX_EN               BIT(11)
#define SERDES_PD_RX                    BIT(10)
#define SERDES_PLL_EN                   BIT(9)
#define SERDES_EN                       BIT(8)
#define SERDES_SELFB_PLL_SEL_CSR        BIT(6)  /* 0:state-machine,1:csr */
#define SERDES_SELFB_PLL_CSR_MASK       0x3UL
#define SERDES_SELFB_PLL_CSR_SHIFT      4
#define SERDES_SELFB_PLL_CSR_4          3       /* 4-12% OV-CLK */
#define SERDES_SELFB_PLL_CSR_0          2       /* 0-4% OV-CLK */
#define SERDES_SELFB_PLL_CSR_12         1       /* 12-18% OV-CLK */
#define SERDES_SELFB_PLL_CSR_18         0       /* 18-25% OV-CLK */
#define SERDES_VCO_SLOW                 BIT(3)
#define SERDES_VCO_FAST                 BIT(2)
#define SERDES_LOCK_DETECT_EN           BIT(1)
#define SERDES_LOCK_DETECT              BIT(0)

#define REG_LPI_DECISN_TIMER            0x143C
#define L2CB_LPI_DESISN_TIMER           0x7D00

#define REG_LPI_CTRL                    0x1440
#define LPI_CTRL_CHK_DA                 BIT(31)
#define LPI_CTRL_ENH_TO_MASK            0x1FFFUL
#define LPI_CTRL_ENH_TO_SHIFT           12
#define LPI_CTRL_ENH_TH_MASK            0x1FUL
#define LPI_CTRL_ENH_TH_SHIFT           6
#define LPI_CTRL_ENH_EN                 BIT(5)
#define LPI_CTRL_CHK_RX                 BIT(4)
#define LPI_CTRL_CHK_STATE              BIT(3)
#define LPI_CTRL_GMII                   BIT(2)
#define LPI_CTRL_TO_PHY                 BIT(1)
#define LPI_CTRL_EN                     BIT(0)

#define REG_LPI_WAIT                    0x1444
#define LPI_WAIT_TIMER_MASK             0xFFFFUL
#define LPI_WAIT_TIMER_SHIFT            0

/* MAC Control Register  */
#define REG_MAC_CTRL                    0x1480
#define MAC_CTRL_SPEED_MODE_SW          BIT(30) /* 0:phy,1:sw */
#define MAC_CTRL_HASH_ALG_CRC32         BIT(29) /* 1:legacy,0:lw_5b */
#define MAC_CTRL_SINGLE_PAUSE_EN        BIT(28)
#define MAC_CTRL_DBG                    BIT(27)
#define MAC_CTRL_BC_EN                  BIT(26)
#define MAC_CTRL_MC_ALL_EN              BIT(25)
#define MAC_CTRL_RX_CHKSUM_EN           BIT(24)
#define MAC_CTRL_TX_HUGE                BIT(23)
#define MAC_CTRL_DBG_TX_BKPRESURE       BIT(22)
#define MAC_CTRL_SPEED_MASK             3UL
#define MAC_CTRL_SPEED_SHIFT            20
#define MAC_CTRL_SPEED_10_100           1
#define MAC_CTRL_SPEED_1000             2
#define MAC_CTRL_TX_SIMURST             BIT(19)
#define MAC_CTRL_SCNT                   BIT(17)
#define MAC_CTRL_TX_PAUSE               BIT(16)
#define MAC_CTRL_PROMIS_EN              BIT(15)
#define MAC_CTRL_RMV_VLAN               BIT(14)
#define MAC_CTRL_PRMLEN_MASK            0xFUL
#define MAC_CTRL_PRMLEN_SHIFT           10
#define MAC_CTRL_HUGE_EN                BIT(9)
#define MAC_CTRL_LENCHK                 BIT(8)
#define MAC_CTRL_PAD                    BIT(7)
#define MAC_CTRL_ADD_CRC                BIT(6)
#define MAC_CTRL_DUPLX                  BIT(5)
#define MAC_CTRL_LOOPBACK               BIT(4)
#define MAC_CTRL_RX_FLOW                BIT(3)
#define MAC_CTRL_TX_FLOW                BIT(2)
#define MAC_CTRL_RX_EN                  BIT(1)
#define MAC_CTRL_TX_EN                  BIT(0)

/* MAC IPG/IFG Control Register  */
#define REG_MAC_IPG_IFG                 0x1484
#define MAC_IPG_IFG_IPGT_SHIFT          0       /* Desired back to back
                                                 * inter-packet gap. The
                                                 * default is 96-bit time */
#define MAC_IPG_IFG_IPGT_MASK           0x7f
#define MAC_IPG_IFG_MIFG_SHIFT          8       /* Minimum number of IFG to
                                                 * enforce in between RX frames */
#define MAC_IPG_IFG_MIFG_MASK           0xff    /* Frame gap below such IFP is dropped */
#define MAC_IPG_IFG_IPGR1_SHIFT         16      /* 64bit Carrier-Sense window */
#define MAC_IPG_IFG_IPGR1_MASK          0x7f
#define MAC_IPG_IFG_IPGR2_SHIFT         24      /* 96-bit IPG window */
#define MAC_IPG_IFG_IPGR2_MASK          0x7f

/* MAC STATION ADDRESS  */
#define REG_MAC_STA_ADDR                0x1488

/* Hash table for multicast address */
#define REG_RX_HASH_TABLE               0x1490

/* MAC Half-Duplex Control Register */
#define REG_MAC_HALF_DUPLX_CTRL         0x1498
#define MAC_HALF_DUPLX_CTRL_LCOL_SHIFT  0      /* Collision Window */
#define MAC_HALF_DUPLX_CTRL_LCOL_MASK   0x3ff
#define MAC_HALF_DUPLX_CTRL_RETRY_SHIFT 12
#define MAC_HALF_DUPLX_CTRL_RETRY_MASK  0xf
#define MAC_HALF_DUPLX_CTRL_EXC_DEF_EN  0x10000
#define MAC_HALF_DUPLX_CTRL_NO_BACK_C   0x20000
#define MAC_HALF_DUPLX_CTRL_NO_BACK_P   0x40000 /* No back-off on backpressure,
                                                 * immediately start the
                                                 * transmission after back pressure */
#define MAC_HALF_DUPLX_CTRL_ABEBE        0x80000 /* 1: Alternative Binary Exponential Back-off Enabled */
#define MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT  20      /* Maximum binary exponential number */
#define MAC_HALF_DUPLX_CTRL_ABEBT_MASK   0xf
#define MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT 24      /* IPG to start JAM for collision based flow control in half-duplex */
#define MAC_HALF_DUPLX_CTRL_JAMIPG_MASK  0xf     /* mode. In unit of 8-bit time */

/* Maximum Frame Length Control Register   */
#define REG_MTU                         0x149c

/* Wake-On-Lan control register */
#define REG_WOL_CTRL                    0x14a0
#define WOL_PT7_MATCH                   BIT(31)
#define WOL_PT6_MATCH                   BIT(30)
#define WOL_PT5_MATCH                   BIT(29)
#define WOL_PT4_MATCH                   BIT(28)
#define WOL_PT3_MATCH                   BIT(27)
#define WOL_PT2_MATCH                   BIT(26)
#define WOL_PT1_MATCH                   BIT(25)
#define WOL_PT0_MATCH                   BIT(24)
#define WOL_PT7_EN                      BIT(23)
#define WOL_PT6_EN                      BIT(22)
#define WOL_PT5_EN                      BIT(21)
#define WOL_PT4_EN                      BIT(20)
#define WOL_PT3_EN                      BIT(19)
#define WOL_PT2_EN                      BIT(18)
#define WOL_PT1_EN                      BIT(17)
#define WOL_PT0_EN                      BIT(16)
#define WOL_LNKCHG_ST                   BIT(10)
#define WOL_MAGIC_ST                    BIT(9)
#define WOL_PATTERN_ST                  BIT(8)
#define WOL_OOB_EN                      BIT(6)
#define WOL_LINK_CHG_PME_EN             BIT(5)
#define WOL_LINK_CHG_EN                 BIT(4)
#define WOL_MAGIC_PME_EN                BIT(3)
#define WOL_MAGIC_EN                    BIT(2)
#define WOL_PATTERN_PME_EN              BIT(1)
#define WOL_PATTERN_EN                  BIT(0)

/* WOL Length ( 2 DWORD ) */
#define REG_WOL_PTLEN1                  0x14A4
#define WOL_PTLEN1_3_MASK               0xFFUL
#define WOL_PTLEN1_3_SHIFT              24
#define WOL_PTLEN1_2_MASK               0xFFUL
#define WOL_PTLEN1_2_SHIFT              16
#define WOL_PTLEN1_1_MASK               0xFFUL
#define WOL_PTLEN1_1_SHIFT              8
#define WOL_PTLEN1_0_MASK               0xFFUL
#define WOL_PTLEN1_0_SHIFT              0

#define REG_WOL_PTLEN2                  0x14A8
#define WOL_PTLEN2_7_MASK               0xFFUL
#define WOL_PTLEN2_7_SHIFT              24
#define WOL_PTLEN2_6_MASK               0xFFUL
#define WOL_PTLEN2_6_SHIFT              16
#define WOL_PTLEN2_5_MASK               0xFFUL
#define WOL_PTLEN2_5_SHIFT              8
#define WOL_PTLEN2_4_MASK               0xFFUL
#define WOL_PTLEN2_4_SHIFT              0

/* Internal SRAM Partition Register */
#define RFDX_HEAD_ADDR_MASK             0x03FF
#define RFDX_HARD_ADDR_SHIFT            0
#define RFDX_TAIL_ADDR_MASK             0x03FF
#define RFDX_TAIL_ADDR_SHIFT            16

#define REG_SRAM_RFD0_INFO              0x1500
#define REG_SRAM_RFD1_INFO              0x1504
#define REG_SRAM_RFD2_INFO              0x1508
#define REG_SRAM_RFD3_INFO              0x150C

#define REG_RFD_NIC_LEN                 0x1510 /* In 8-bytes */
#define RFD_NIC_LEN_MASK                0x03FF

#define REG_SRAM_TRD_ADDR               0x1518
#define TPD_HEAD_ADDR_MASK              0x03FF
#define TPD_HEAD_ADDR_SHIFT             0
#define TPD_TAIL_ADDR_MASK              0x03FF
#define TPD_TAIL_ADDR_SHIFT             16

#define REG_SRAM_TRD_LEN                0x151C /* In 8-bytes */
#define TPD_NIC_LEN_MASK                0x03FF

#define REG_SRAM_RXF_ADDR               0x1520
#define REG_SRAM_RXF_LEN                0x1524
#define REG_SRAM_TXF_ADDR               0x1528
#define REG_SRAM_TXF_LEN                0x152C
#define REG_SRAM_TCPH_ADDR              0x1530
#define REG_SRAM_PKTH_ADDR              0x1532

/*
 * Load Ptr Register
 * Software sets this bit after the initialization of the head and tail */
#define REG_LOAD_PTR                    0x1534

/*
 * addresses of all descriptors, as well as the following descriptor
 * control register, which triggers each function block to load the head
 * pointer to prepare for the operation. This bit is then self-cleared
 * after one cycle.
 */
#define REG_RX_BASE_ADDR_HI             0x1540
#define REG_TX_BASE_ADDR_HI             0x1544
#define REG_RFD0_HEAD_ADDR_LO           0x1550
#define REG_RFD1_HEAD_ADDR_LO          0x1554
#define REG_RFD2_HEAD_ADDR_LO          0x1558
#define REG_RFD3_HEAD_ADDR_LO          0x155C
#define REG_RFD_RING_SIZE               0x1560
#define RFD_RING_SIZE_MASK              0x0FFF
#define REG_RX_BUF_SIZE                 0x1564
#define RX_BUF_SIZE_MASK                0xFFFF
#define REG_RRD0_HEAD_ADDR_LO           0x1568
#define REG_RRD1_HEAD_ADDR_LO          0x156C
#define REG_RRD2_HEAD_ADDR_LO          0x1570
#define REG_RRD3_HEAD_ADDR_LO          0x1574
#define REG_RRD_RING_SIZE               0x1578
#define RRD_RING_SIZE_MASK              0x0FFF
#define REG_TPD_PRI1_ADDR_LO            0x157C
#define REG_TPD_PRI0_ADDR_LO            0x1580
#define REG_TPD_PRI2_ADDR_LO           0x1F10
#define REG_TPD_PRI3_ADDR_LO           0x1F14

#define REG_TPD_RING_SIZE               0x1584
#define TPD_RING_SIZE_MASK              0xFFFF

/* TXQ Control Register */
#define REG_TXQ_CTRL                    0x1590
#define TXQ_TXF_BURST_NUM_MASK          0xFFFFUL
#define TXQ_TXF_BURST_NUM_SHIFT         16
#define L1C_TXQ_TXF_BURST_PREF          0x200
#define L2CB_TXQ_TXF_BURST_PREF         0x40
#define TXQ_CTRL_PEDING_CLR             BIT(8)
#define TXQ_CTRL_LS_8023_EN             BIT(7)
#define TXQ_CTRL_ENH_MODE               BIT(6)
#define TXQ_CTRL_EN                     BIT(5)
#define TXQ_CTRL_IP_OPTION_EN           BIT(4)
#define TXQ_NUM_TPD_BURST_MASK          0xFUL
#define TXQ_NUM_TPD_BURST_SHIFT         0
#define TXQ_NUM_TPD_BURST_DEF           5
#define TXQ_CFGV                        (\
        FIELDX(TXQ_NUM_TPD_BURST, TXQ_NUM_TPD_BURST_DEF) |\
        TXQ_CTRL_ENH_MODE |\
        TXQ_CTRL_LS_8023_EN |\
        TXQ_CTRL_IP_OPTION_EN)
#define L1C_TXQ_CFGV                    (\
        TXQ_CFGV |\
        FIELDX(TXQ_TXF_BURST_NUM, L1C_TXQ_TXF_BURST_PREF))
#define L2CB_TXQ_CFGV                   (\
        TXQ_CFGV |\
        FIELDX(TXQ_TXF_BURST_NUM, L2CB_TXQ_TXF_BURST_PREF))


/* Jumbo packet Threshold for task offload */
#define REG_TX_TSO_OFFLOAD_THRESH       0x1594 /* In 8-bytes */
#define TX_TSO_OFFLOAD_THRESH_MASK      0x07FF
#define MAX_TSO_FRAME_SIZE              (7*1024)

#define REG_TXF_WATER_MARK              0x1598 /* In 8-bytes */
#define TXF_WATER_MARK_MASK             0x0FFF
#define TXF_LOW_WATER_MARK_SHIFT        0
#define TXF_HIGH_WATER_MARK_SHIFT       16
#define TXQ_CTRL_BURST_MODE_EN          0x80000000

#define REG_THRUPUT_MON_CTRL            0x159C
#define THRUPUT_MON_RATE_MASK           0x3
#define THRUPUT_MON_RATE_SHIFT          0
#define THRUPUT_MON_EN                  0x80

/* RXQ Control Register */
#define REG_RXQ_CTRL                    0x15A0
#define ASPM_THRUPUT_LIMIT_MASK         0x3
#define ASPM_THRUPUT_LIMIT_SHIFT        0
#define ASPM_THRUPUT_LIMIT_NO           0x00
#define ASPM_THRUPUT_LIMIT_1M           0x01
#define ASPM_THRUPUT_LIMIT_10M          0x02
#define ASPM_THRUPUT_LIMIT_100M         0x03
#define IPV6_CHKSUM_CTRL_EN             BIT(7)
#define RXQ_RFD_BURST_NUM_MASK          0x003F
#define RXQ_RFD_BURST_NUM_SHIFT         20
#define RXQ_NUM_RFD_PREF_DEF            8
#define RSS_MODE_MASK                   3UL
#define RSS_MODE_SHIFT                  26
#define RSS_MODE_DIS                    0
#define RSS_MODE_SQSI                   1
#define RSS_MODE_MQSI                   2
#define RSS_MODE_MQMI                   3
#define RSS_NIP_QUEUE_SEL               BIT(28) /* 0:q0, 1:table */
#define RRS_HASH_CTRL_EN                BIT(29)
#define RX_CUT_THRU_EN                  BIT(30)
#define RXQ_CTRL_EN                     BIT(31)

#define REG_RFD_FREE_THRESH             0x15A4
#define RFD_FREE_THRESH_MASK            0x003F
#define RFD_FREE_HI_THRESH_SHIFT        0
#define RFD_FREE_LO_THRESH_SHIFT        6

/* RXF flow control register */
#define REG_RXQ_RXF_PAUSE_THRESH        0x15A8
#define RXQ_RXF_PAUSE_TH_HI_SHIFT       0
#define RXQ_RXF_PAUSE_TH_HI_MASK        0x0FFF
#define RXQ_RXF_PAUSE_TH_LO_SHIFT       16
#define RXQ_RXF_PAUSE_TH_LO_MASK        0x0FFF

#define REG_RXD_DMA_CTRL                0x15AC
#define RXD_DMA_THRESH_MASK             0x0FFF  /* In 8-bytes */
#define RXD_DMA_THRESH_SHIFT            0
#define RXD_DMA_DOWN_TIMER_MASK         0xFFFF
#define RXD_DMA_DOWN_TIMER_SHIFT        16

/* DMA Engine Control Register */
#define REG_DMA_CTRL                    0x15C0
#define DMA_CTRL_SMB_NOW                BIT(31)
#define DMA_CTRL_WPEND_CLR              BIT(30)
#define DMA_CTRL_RPEND_CLR              BIT(29)
#define DMA_CTRL_WDLY_CNT_MASK          0xFUL
#define DMA_CTRL_WDLY_CNT_SHIFT         16
#define DMA_CTRL_WDLY_CNT_DEF           4
#define DMA_CTRL_RDLY_CNT_MASK          0x1FUL
#define DMA_CTRL_RDLY_CNT_SHIFT         11
#define DMA_CTRL_RDLY_CNT_DEF           15
#define DMA_CTRL_RREQ_PRI_DATA          BIT(10)      /* 0:tpd, 1:data */
#define DMA_CTRL_WREQ_BLEN_MASK         7UL
#define DMA_CTRL_WREQ_BLEN_SHIFT        7
#define DMA_CTRL_RREQ_BLEN_MASK         7UL
#define DMA_CTRL_RREQ_BLEN_SHIFT        4
#define L1C_CTRL_DMA_RCB_LEN128         BIT(3)   /* 0:64bytes,1:128bytes */
#define DMA_CTRL_RORDER_MODE_MASK       7UL
#define DMA_CTRL_RORDER_MODE_SHIFT      0
#define DMA_CTRL_RORDER_MODE_OUT        4
#define DMA_CTRL_RORDER_MODE_ENHANCE    2
#define DMA_CTRL_RORDER_MODE_IN         1

/* INT-triggle/SMB Control Register */
#define REG_SMB_STAT_TIMER              0x15C4  /* 2us resolution */
#define SMB_STAT_TIMER_MASK             0xFFFFFF
#define REG_TINT_TPD_THRESH             0x15C8 /* tpd th to trig intrrupt */

/* Mail box */
#define MB_RFDX_PROD_IDX_MASK           0xFFFF
#define REG_MB_RFD0_PROD_IDX            0x15E0
#define REG_MB_RFD1_PROD_IDX           0x15E4
#define REG_MB_RFD2_PROD_IDX           0x15E8
#define REG_MB_RFD3_PROD_IDX           0x15EC

#define REG_TPD_PRI1_PIDX               0x15F0  /* 16bit,hi-tpd producer idx */
#define REG_TPD_PRI0_PIDX               0x15F2  /* 16bit,lo-tpd producer idx */
#define REG_TPD_PRI1_CIDX               0x15F4  /* 16bit,hi-tpd consumer idx */
#define REG_TPD_PRI0_CIDX               0x15F6  /* 16bit,lo-tpd consumer idx */
#define REG_TPD_PRI3_PIDX              0x1F18
#define REG_TPD_PRI2_PIDX              0x1F1A
#define REG_TPD_PRI3_CIDX              0x1F1C
#define REG_TPD_PRI2_CIDX              0x1F1E


#define REG_MB_RFD01_CONS_IDX           0x15F8
#define MB_RFD0_CONS_IDX_MASK           0x0000FFFF
#define MB_RFD1_CONS_IDX_MASK           0xFFFF0000
#define REG_MB_RFD23_CONS_IDX          0x15FC
#define MB_RFD2_CONS_IDX_MASK          0x0000FFFF
#define MB_RFD3_CONS_IDX_MASK          0xFFFF0000

/* Interrupt Status Register */
#define REG_ISR                         0x1600
#define ISR_SMB                         0x00000001
#define ISR_TIMER                       0x00000002
/*
 * Software manual interrupt, for debug. Set when SW_MAN_INT_EN is set
 * in Table 51 Selene Master Control Register (Offset 0x1400).
 */
#define ISR_MANUAL                      0x00000004
#define ISR_HW_RXF_OV                   0x00000008 /* RXF overflow interrupt */
#define ISR_RFD0_UR                     0x00000010 /* RFD0 under run */
#define ISR_RFD1_UR                     0x00000020
#define ISR_RFD2_UR                     0x00000040
#define ISR_RFD3_UR                     0x00000080
#define ISR_TXF_UR                      0x00000100
#define ISR_DMAR_TO_RST                 0x00000200
#define ISR_DMAW_TO_RST                 0x00000400
#define ISR_TX_CREDIT                   0x00000800
#define ISR_GPHY                        0x00001000
/* GPHY low power state interrupt */
#define ISR_GPHY_LPW                    0x00002000
#define ISR_TXQ_TO_RST                  0x00004000
#define ISR_TX_PKT_0                   0x00008000
#define ISR_RX_PKT_0                    0x00010000
#define ISR_RX_PKT_1                    0x00020000
#define ISR_RX_PKT_2                    0x00040000
#define ISR_RX_PKT_3                    0x00080000
#define ISR_MAC_RX                      0x00100000
#define ISR_MAC_TX                      0x00200000
#define ISR_UR_DETECTED                 0x00400000
#define ISR_FERR_DETECTED               0x00800000
#define ISR_NFERR_DETECTED              0x01000000
#define ISR_CERR_DETECTED               0x02000000
#define ISR_PHY_LINKDOWN                0x04000000
#define ISR_TX_PKT_1                   0x10000000
#define ISR_TX_PKT_2                   0x20000000
#define ISR_TX_PKT_3                   0x40000000
#define ISR_DIS_INT                     0x80000000

/* Interrupt Mask Register */
#define REG_IMR                         0x1604

#define IMR_NORMAL_MASK         (\
                ISR_MANUAL      |\
                ISR_HW_RXF_OV   |\
                ISR_RFD0_UR     |\
                ISR_TXF_UR      |\
                ISR_DMAR_TO_RST |\
                ISR_TXQ_TO_RST  |\
                ISR_DMAW_TO_RST |\
                ISR_GPHY        |\
                ISR_GPHY_LPW    |\
                ISR_PHY_LINKDOWN)

#define ISR_TX_PKT     (                        \
        ISR_TX_PKT_0    |                       \
        ISR_TX_PKT_1    |                       \
        ISR_TX_PKT_2    |                       \
        ISR_TX_PKT_3)

#define ISR_RX_PKT      (\
        ISR_RX_PKT_0    |\
        ISR_RX_PKT_1    |\
        ISR_RX_PKT_2    |\
        ISR_RX_PKT_3)

#define ISR_OVER        (\
        ISR_RFD0_UR     |\
        ISR_RFD1_UR     |\
        ISR_RFD2_UR     |\
        ISR_RFD3_UR     |\
        ISR_HW_RXF_OV   |\
        ISR_TXF_UR)

#define ISR_ERROR       (\
        ISR_DMAR_TO_RST |\
        ISR_TXQ_TO_RST  |\
        ISR_DMAW_TO_RST |\
        ISR_PHY_LINKDOWN)

#define REG_INT_RETRIG_TIMER            0x1608
#define INT_RETRIG_TIMER_MASK           0xFFFF

#define REG_MAC_RX_STATUS_BIN           0x1700
#define REG_MAC_RX_STATUS_END           0x175c
#define REG_MAC_TX_STATUS_BIN           0x1760
#define REG_MAC_TX_STATUS_END           0x17c0

#define REG_CLK_GATING_CTRL             0x1814
#define CLK_GATING_DMAW_EN              0x0001
#define CLK_GATING_DMAR_EN              0x0002
#define CLK_GATING_TXQ_EN               0x0004
#define CLK_GATING_RXQ_EN               0x0008
#define CLK_GATING_TXMAC_EN             0x0010
#define CLK_GATING_RXMAC_EN             0x0020

#define CLK_GATING_EN_ALL       (CLK_GATING_DMAW_EN |\
                                 CLK_GATING_DMAR_EN |\
                                 CLK_GATING_TXQ_EN  |\
                                 CLK_GATING_RXQ_EN  |\
                                 CLK_GATING_TXMAC_EN|\
                                 CLK_GATING_RXMAC_EN)

/* DEBUG ADDR */
#define REG_DEBUG_DATA0                 0x1900
#define REG_DEBUG_DATA1                 0x1904

#define REG_MT_MAGIC                    0x1F00
#define REG_MT_MODE                     0x1F04
#define REG_MT_SPEED                    0x1F08
#define REG_MT_VERSION                  0x1F0C

#define MT_MAGIC                        0xaabb1234
#define MT_MODE_4Q                      BIT(0)

#define L1D_MPW_PHYID1                  0xD01C  /* V7 */
#define L1D_MPW_PHYID2                  0xD01D  /* V1-V6 */
#define L1D_MPW_PHYID3                  0xD01E  /* V8 */


/* Autoneg Advertisement Register */
#define ADVERTISE_DEFAULT_CAP \
        (ADVERTISE_ALL | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM)

/* 1000BASE-T Control Register */
#define GIGA_CR_1000T_REPEATER_DTE      0x0400  /* 1=Repeater/switch device port 0=DTE device */

#define GIGA_CR_1000T_MS_VALUE          0x0800  /* 1=Configure PHY as Master 0=Configure PHY as Slave */
#define GIGA_CR_1000T_MS_ENABLE         0x1000  /* 1=Master/Slave manual config value 0=Automatic Master/Slave config */
#define GIGA_CR_1000T_TEST_MODE_NORMAL  0x0000  /* Normal Operation */
#define GIGA_CR_1000T_TEST_MODE_1       0x2000  /* Transmit Waveform test */
#define GIGA_CR_1000T_TEST_MODE_2       0x4000  /* Master Transmit Jitter test */
#define GIGA_CR_1000T_TEST_MODE_3       0x6000  /* Slave Transmit Jitter test */
#define GIGA_CR_1000T_TEST_MODE_4       0x8000  /* Transmitter Distortion test */
#define GIGA_CR_1000T_SPEED_MASK        0x0300
#define GIGA_CR_1000T_DEFAULT_CAP       0x0300

/* PHY Specific Status Register */
#define MII_GIGA_PSSR                   0x11
#define GIGA_PSSR_SPD_DPLX_RESOLVED     0x0800  /* 1=Speed & Duplex resolved */
#define GIGA_PSSR_DPLX                  0x2000  /* 1=Duplex 0=Half Duplex */
#define GIGA_PSSR_SPEED                 0xC000  /* Speed, bits 14:15 */
#define GIGA_PSSR_10MBS                 0x0000  /* 00=10Mbs */
#define GIGA_PSSR_100MBS                0x4000  /* 01=100Mbs */
#define GIGA_PSSR_1000MBS               0x8000  /* 10=1000Mbs */

/* PHY Interrupt Enable Register */
#define MII_IER                         0x12
#define IER_LINK_UP                     0x0400
#define IER_LINK_DOWN                   0x0800

/* PHY Interrupt Status Register */
#define MII_ISR                         0x13
#define ISR_LINK_UP                     0x0400
#define ISR_LINK_DOWN                   0x0800

/* Cable-Detect-Test Control Register */
#define MII_CDTC                        0x16
#define CDTC_EN_OFF                     0   /* sc */
#define CDTC_EN_BITS                    1
#define CDTC_PAIR_OFF                   8
#define CDTC_PAIR_BIT                   2

/* Cable-Detect-Test Status Register */
#define MII_CDTS                        0x1C
#define CDTS_STATUS_OFF                 8
#define CDTS_STATUS_BITS                2
#define CDTS_STATUS_NORMAL              0
#define CDTS_STATUS_SHORT               1
#define CDTS_STATUS_OPEN                2
#define CDTS_STATUS_INVALID             3

#define MII_DBG_ADDR                    0x1D
#define MII_DBG_DATA                    0x1E

/***************************** debug port *************************************/

#define MIIDBG_ANACTRL                  0x00
#define ANACTRL_CLK125M_DELAY_EN        0x8000
#define ANACTRL_VCO_FAST                0x4000
#define ANACTRL_VCO_SLOW                0x2000
#define ANACTRL_AFE_MODE_EN             0x1000
#define ANACTRL_LCKDET_PHY              0x800
#define ANACTRL_LCKDET_EN               0x400
#define ANACTRL_OEN_125M                0x200
#define ANACTRL_HBIAS_EN                0x100
#define ANACTRL_HB_EN                   0x80
#define ANACTRL_SEL_HSP                 0x40
#define ANACTRL_CLASSA_EN               0x20
#define ANACTRL_MANUSWON_SWR_MASK       3U
#define ANACTRL_MANUSWON_SWR_SHIFT      2
#define ANACTRL_MANUSWON_SWR_2V         0
#define ANACTRL_MANUSWON_SWR_1P9V       1
#define ANACTRL_MANUSWON_SWR_1P8V       2
#define ANACTRL_MANUSWON_SWR_1P7V       3
#define ANACTRL_MANUSWON_BW3_4M         0x2
#define ANACTRL_RESTART_CAL             0x1
#define ANACTRL_DEF                     0x02EF

#define MIIDBG_SYSMODCTRL               0x04
#define SYSMODCTRL_IECHOADJ_PFMH_PHY    0x8000
#define SYSMODCTRL_IECHOADJ_BIASGEN     0x4000
#define SYSMODCTRL_IECHOADJ_PFML_PHY    0x2000
#define SYSMODCTRL_IECHOADJ_PS_MASK     3U
#define SYSMODCTRL_IECHOADJ_PS_SHIFT    10
#define SYSMODCTRL_IECHOADJ_PS_40       3
#define SYSMODCTRL_IECHOADJ_PS_20       2
#define SYSMODCTRL_IECHOADJ_PS_0        1
#define SYSMODCTRL_IECHOADJ_10BT_100MV  0x40 /* 1:100mv, 0:200mv */
#define SYSMODCTRL_IECHOADJ_HLFAP_MASK  3U
#define SYSMODCTRL_IECHOADJ_HLFAP_SHIFT 4
#define SYSMODCTRL_IECHOADJ_VDFULBW     0x8
#define SYSMODCTRL_IECHOADJ_VDBIASHLF   0x4
#define SYSMODCTRL_IECHOADJ_VDAMPHLF    0x2
#define SYSMODCTRL_IECHOADJ_VDLANSW     0x1
#define SYSMODCTRL_IECHOADJ_DEF         0x88BB /* ???? */

/* for l1d & l2cb */
#define SYSMODCTRL_IECHOADJ_CUR_ADD     0x8000
#define SYSMODCTRL_IECHOADJ_CUR_MASK    7U
#define SYSMODCTRL_IECHOADJ_CUR_SHIFT   12
#define SYSMODCTRL_IECHOADJ_VOL_MASK    0xFU
#define SYSMODCTRL_IECHOADJ_VOL_SHIFT   8
#define SYSMODCTRL_IECHOADJ_VOL_17ALL   3
#define SYSMODCTRL_IECHOADJ_VOL_100M15  1
#define SYSMODCTRL_IECHOADJ_VOL_10M17   0
#define SYSMODCTRL_IECHOADJ_BIAS1_MASK  0xFU
#define SYSMODCTRL_IECHOADJ_BIAS1_SHIFT 4
#define SYSMODCTRL_IECHOADJ_BIAS2_MASK  0xFU
#define SYSMODCTRL_IECHOADJ_BIAS2_SHIFT 0
#define L1D_SYSMODCTRL_IECHOADJ_DEF     0x4FBB

#define MIIDBG_SRDSYSMOD                0x05
#define SRDSYSMOD_LCKDET_EN             0x2000
#define SRDSYSMOD_PLL_EN                0x800
#define SRDSYSMOD_SEL_HSP               0x400
#define SRDSYSMOD_HLFTXDR               0x200
#define SRDSYSMOD_TXCLK_DELAY_EN        0x100
#define SRDSYSMOD_TXELECIDLE            0x80
#define SRDSYSMOD_DEEMP_EN              0x40
#define SRDSYSMOD_MS_PAD                0x4
#define SRDSYSMOD_CDR_ADC_VLTG          0x2
#define SRDSYSMOD_CDR_DAC_1MA           0x1
#define SRDSYSMOD_DEF                   0x2C46

#define MIIDBG_CFGLPSPD                 0x0A
#define CFGLPSPD_RSTCNT_MASK            3U
#define CFGLPSPD_RSTCNT_SHIFT           14
#define CFGLPSPD_RSTCNT_CLK125SW        0x2000

#define MIIDBG_HIBNEG                   0x0B
#define HIBNEG_PSHIB_EN                 0x8000
#define HIBNEG_WAKE_BOTH                0x4000
#define HIBNEG_ONOFF_ANACHG_SUDEN       0x2000
#define HIBNEG_HIB_PULSE                0x1000
#define HIBNEG_GATE_25M_EN              0x800
#define HIBNEG_RST_80U                  0x400
#define HIBNEG_RST_TIMER_MASK           3U
#define HIBNEG_RST_TIMER_SHIFT          8
#define HIBNEG_GTX_CLK_DELAY_MASK       3U
#define HIBNEG_GTX_CLK_DELAY_SHIFT      5
#define HIBNEG_BYPSS_BRKTIMER           0x10
#define HIBNEG_DEF                      0xBC40

#define MIIDBG_TST10BTCFG               0x12
#define TST10BTCFG_INTV_TIMER_MASK      3U
#define TST10BTCFG_INTV_TIMER_SHIFT     14
#define TST10BTCFG_TRIGER_TIMER_MASK    3U
#define TST10BTCFG_TRIGER_TIMER_SHIFT   12
#define TST10BTCFG_DIV_MAN_MLT3_EN      0x800
#define TST10BTCFG_OFF_DAC_IDLE         0x400
#define TST10BTCFG_LPBK_DEEP            0x4 /* 1:deep,0:shallow */
#define TST10BTCFG_DEF                  0x4C04

#define MIIDBG_AZ_ANADECT               0x15
#define AZ_ANADECT_10BTRX_TH            0x8000
#define AZ_ANADECT_BOTH_01CHNL          0x4000
#define AZ_ANADECT_INTV_MASK            0x3FU
#define AZ_ANADECT_INTV_SHIFT           8
#define AZ_ANADECT_THRESH_MASK          0xFU
#define AZ_ANADECT_THRESH_SHIFT         4
#define AZ_ANADECT_CHNL_MASK            0xFU
#define AZ_ANADECT_CHNL_SHIFT           0
#define AZ_ANADECT_DEF                  0x3220
#define AZ_ANADECT_LONG                 0xb210

#define MIIDBG_MSE16DB                  0x18    /* l1d */
#define L1D_MSE16DB_UP                  0x05EA
#define L1D_MSE16DB_DOWN                0x02EA

#define MIIDBG_LEGCYPS                  0x29
#define LEGCYPS_EN                      0x8000
#define LEGCYPS_DAC_AMP1000_MASK        7U
#define LEGCYPS_DAC_AMP1000_SHIFT       12
#define LEGCYPS_DAC_AMP100_MASK         7U
#define LEGCYPS_DAC_AMP100_SHIFT        9
#define LEGCYPS_DAC_AMP10_MASK          7U
#define LEGCYPS_DAC_AMP10_SHIFT         6
#define LEGCYPS_UNPLUG_TIMER_MASK       7U
#define LEGCYPS_UNPLUG_TIMER_SHIFT      3
#define LEGCYPS_UNPLUG_DECT_EN          0x4
#define LEGCYPS_ECNC_PS_EN              0x1
#define L1D_LEGCYPS_DEF                 0x129D
#define L1C_LEGCYPS_DEF                 0x36DD

#define MIIDBG_TST100BTCFG              0x36
#define TST100BTCFG_NORMAL_BW_EN        0x8000
#define TST100BTCFG_BADLNK_BYPASS       0x4000
#define TST100BTCFG_SHORTCABL_TH_MASK   0x3FU
#define TST100BTCFG_SHORTCABL_TH_SHIFT  8
#define TST100BTCFG_LITCH_EN            0x80
#define TST100BTCFG_VLT_SW              0x40
#define TST100BTCFG_LONGCABL_TH_MASK    0x3FU

#define TST100BTCFG_LONGCABL_TH_SHIFT   0
#define TST100BTCFG_DEF                 0xE12C

#define MIIDBG_VOLT_CTRL                0x3B    /* only for l2cb 1 & 2 */
#define VOLT_CTRL_CABLE1TH_MASK         0x1FFU
#define VOLT_CTRL_CABLE1TH_SHIFT        7
#define VOLT_CTRL_AMPCTRL_MASK          3U
#define VOLT_CTRL_AMPCTRL_SHIFT         5
#define VOLT_CTRL_SW_BYPASS             0x10
#define VOLT_CTRL_SWLOWEST              0x8
#define VOLT_CTRL_DACAMP10_MASK         7U
#define VOLT_CTRL_DACAMP10_SHIFT        0

#define MIIDBG_CABLE1TH_DET             0x3E
#define CABLE1TH_DET_EN                 0x8000


/******* dev 3 *********/
#define MIIEXT_PCS                      3

#define MIIEXT_CLDCTRL3                 0x8003
#define CLDCTRL3_BP_CABLE1TH_DET_GT     0x8000
#define CLDCTRL3_AZ_DISAMP              0x1000
#define L2CB_CLDCTRL3                   0x4D19
#define L1D_CLDCTRL3                    0xDD19

#define MIIEXT_CLDCTRL6                 0x8006
#define CLDCTRL6_CAB_LEN_MASK           0x1FFU
#define CLDCTRL6_CAB_LEN_SHIFT          0
#define CLDCTRL6_CAB_LEN_SHORT          0x50

/********* dev 7 **********/
#define MIIEXT_ANEG                     7

#define MIIEXT_LOCAL_EEEADV             0x3C
#define LOCAL_EEEADV_1000BT             0x4
#define LOCAL_EEEADV_100BT              0x2

#define MIIEXT_REMOTE_EEEADV            0x3D
#define REMOTE_EEEADV_1000BT            0x4
#define REMOTE_EEEADV_100BT             0x2

#define MIIEXT_EEE_ANEG                 0x8000
#define EEE_ANEG_1000M                  0x4
#define EEE_ANEG_100M                   0x2

#endif /*_ATL1C_HW_H_*/