linux/arch/mips/pci/pci-bcm63xx.c
<<
>>
Prefs
   1/*
   2 * This file is subject to the terms and conditions of the GNU General Public
   3 * License.  See the file "COPYING" in the main directory of this archive
   4 * for more details.
   5 *
   6 * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
   7 */
   8
   9#include <linux/types.h>
  10#include <linux/pci.h>
  11#include <linux/kernel.h>
  12#include <linux/init.h>
  13#include <linux/delay.h>
  14#include <linux/clk.h>
  15#include <asm/bootinfo.h>
  16
  17#include <bcm63xx_reset.h>
  18
  19#include "pci-bcm63xx.h"
  20
  21/*
  22 * Allow PCI to be disabled at runtime depending on board nvram
  23 * configuration
  24 */
  25int bcm63xx_pci_enabled;
  26
  27static struct resource bcm_pci_mem_resource = {
  28        .name   = "bcm63xx PCI memory space",
  29        .start  = BCM_PCI_MEM_BASE_PA,
  30        .end    = BCM_PCI_MEM_END_PA,
  31        .flags  = IORESOURCE_MEM
  32};
  33
  34static struct resource bcm_pci_io_resource = {
  35        .name   = "bcm63xx PCI IO space",
  36        .start  = BCM_PCI_IO_BASE_PA,
  37#ifdef CONFIG_CARDBUS
  38        .end    = BCM_PCI_IO_HALF_PA,
  39#else
  40        .end    = BCM_PCI_IO_END_PA,
  41#endif
  42        .flags  = IORESOURCE_IO
  43};
  44
  45struct pci_controller bcm63xx_controller = {
  46        .pci_ops        = &bcm63xx_pci_ops,
  47        .io_resource    = &bcm_pci_io_resource,
  48        .mem_resource   = &bcm_pci_mem_resource,
  49};
  50
  51/*
  52 * We handle cardbus  via a fake Cardbus bridge,  memory and io spaces
  53 * have to be  clearly separated from PCI one  since we have different
  54 * memory decoder.
  55 */
  56#ifdef CONFIG_CARDBUS
  57static struct resource bcm_cb_mem_resource = {
  58        .name   = "bcm63xx Cardbus memory space",
  59        .start  = BCM_CB_MEM_BASE_PA,
  60        .end    = BCM_CB_MEM_END_PA,
  61        .flags  = IORESOURCE_MEM
  62};
  63
  64static struct resource bcm_cb_io_resource = {
  65        .name   = "bcm63xx Cardbus IO space",
  66        .start  = BCM_PCI_IO_HALF_PA + 1,
  67        .end    = BCM_PCI_IO_END_PA,
  68        .flags  = IORESOURCE_IO
  69};
  70
  71struct pci_controller bcm63xx_cb_controller = {
  72        .pci_ops        = &bcm63xx_cb_ops,
  73        .io_resource    = &bcm_cb_io_resource,
  74        .mem_resource   = &bcm_cb_mem_resource,
  75};
  76#endif
  77
  78static struct resource bcm_pcie_mem_resource = {
  79        .name   = "bcm63xx PCIe memory space",
  80        .start  = BCM_PCIE_MEM_BASE_PA,
  81        .end    = BCM_PCIE_MEM_END_PA,
  82        .flags  = IORESOURCE_MEM,
  83};
  84
  85static struct resource bcm_pcie_io_resource = {
  86        .name   = "bcm63xx PCIe IO space",
  87        .start  = 0,
  88        .end    = 0,
  89        .flags  = 0,
  90};
  91
  92struct pci_controller bcm63xx_pcie_controller = {
  93        .pci_ops        = &bcm63xx_pcie_ops,
  94        .io_resource    = &bcm_pcie_io_resource,
  95        .mem_resource   = &bcm_pcie_mem_resource,
  96};
  97
  98static u32 bcm63xx_int_cfg_readl(u32 reg)
  99{
 100        u32 tmp;
 101
 102        tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK;
 103        tmp |= MPI_PCICFGCTL_WRITEEN_MASK;
 104        bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG);
 105        iob();
 106        return bcm_mpi_readl(MPI_PCICFGDATA_REG);
 107}
 108
 109static void bcm63xx_int_cfg_writel(u32 val, u32 reg)
 110{
 111        u32 tmp;
 112
 113        tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK;
 114        tmp |=  MPI_PCICFGCTL_WRITEEN_MASK;
 115        bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG);
 116        bcm_mpi_writel(val, MPI_PCICFGDATA_REG);
 117}
 118
 119void __iomem *pci_iospace_start;
 120
 121static void __init bcm63xx_reset_pcie(void)
 122{
 123        u32 val;
 124        u32 reg;
 125
 126        /* enable SERDES */
 127        if (BCMCPU_IS_6328())
 128                reg = MISC_SERDES_CTRL_6328_REG;
 129        else
 130                reg = MISC_SERDES_CTRL_6362_REG;
 131
 132        val = bcm_misc_readl(reg);
 133        val |= SERDES_PCIE_EN | SERDES_PCIE_EXD_EN;
 134        bcm_misc_writel(val, reg);
 135
 136        /* reset the PCIe core */
 137        bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1);
 138        bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 1);
 139        mdelay(10);
 140
 141        bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 0);
 142        mdelay(10);
 143
 144        bcm63xx_core_set_reset(BCM63XX_RESET_PCIE_EXT, 0);
 145        mdelay(200);
 146}
 147
 148static struct clk *pcie_clk;
 149
 150static int __init bcm63xx_register_pcie(void)
 151{
 152        u32 val;
 153
 154        /* enable clock */
 155        pcie_clk = clk_get(NULL, "pcie");
 156        if (IS_ERR_OR_NULL(pcie_clk))
 157                return -ENODEV;
 158
 159        clk_prepare_enable(pcie_clk);
 160
 161        bcm63xx_reset_pcie();
 162
 163        /* configure the PCIe bridge */
 164        val = bcm_pcie_readl(PCIE_BRIDGE_OPT1_REG);
 165        val |= OPT1_RD_BE_OPT_EN;
 166        val |= OPT1_RD_REPLY_BE_FIX_EN;
 167        val |= OPT1_PCIE_BRIDGE_HOLE_DET_EN;
 168        val |= OPT1_L1_INT_STATUS_MASK_POL;
 169        bcm_pcie_writel(val, PCIE_BRIDGE_OPT1_REG);
 170
 171        /* setup the interrupts */
 172        val = bcm_pcie_readl(PCIE_BRIDGE_RC_INT_MASK_REG);
 173        val |= PCIE_RC_INT_A | PCIE_RC_INT_B | PCIE_RC_INT_C | PCIE_RC_INT_D;
 174        bcm_pcie_writel(val, PCIE_BRIDGE_RC_INT_MASK_REG);
 175
 176        val = bcm_pcie_readl(PCIE_BRIDGE_OPT2_REG);
 177        /* enable credit checking and error checking */
 178        val |= OPT2_TX_CREDIT_CHK_EN;
 179        val |= OPT2_UBUS_UR_DECODE_DIS;
 180
 181        /* set device bus/func for the pcie device */
 182        val |= (PCIE_BUS_DEVICE << OPT2_CFG_TYPE1_BUS_NO_SHIFT);
 183        val |= OPT2_CFG_TYPE1_BD_SEL;
 184        bcm_pcie_writel(val, PCIE_BRIDGE_OPT2_REG);
 185
 186        /* setup class code as bridge */
 187        val = bcm_pcie_readl(PCIE_IDVAL3_REG);
 188        val &= ~IDVAL3_CLASS_CODE_MASK;
 189        val |= (PCI_CLASS_BRIDGE_PCI << IDVAL3_SUBCLASS_SHIFT);
 190        bcm_pcie_writel(val, PCIE_IDVAL3_REG);
 191
 192        /* disable bar1 size */
 193        val = bcm_pcie_readl(PCIE_CONFIG2_REG);
 194        val &= ~CONFIG2_BAR1_SIZE_MASK;
 195        bcm_pcie_writel(val, PCIE_CONFIG2_REG);
 196
 197        /* set bar0 to little endian */
 198        val = (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_BASE_SHIFT;
 199        val |= (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_MASK_SHIFT;
 200        val |= BASEMASK_REMAP_EN;
 201        bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
 202
 203        val = (BCM_PCIE_MEM_BASE_PA >> 20) << REBASE_ADDR_BASE_SHIFT;
 204        bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
 205
 206        register_pci_controller(&bcm63xx_pcie_controller);
 207
 208        return 0;
 209}
 210
 211static int __init bcm63xx_register_pci(void)
 212{
 213        unsigned int mem_size;
 214        u32 val;
 215        /*
 216         * configuration  access are  done through  IO space,  remap 4
 217         * first bytes to access it from CPU.
 218         *
 219         * this means that  no io access from CPU  should happen while
 220         * we do a configuration cycle,  but there's no way we can add
 221         * a spinlock for each io access, so this is currently kind of
 222         * broken on SMP.
 223         */
 224        pci_iospace_start = ioremap(BCM_PCI_IO_BASE_PA, 4);
 225        if (!pci_iospace_start)
 226                return -ENOMEM;
 227
 228        /* setup local bus to PCI access (PCI memory) */
 229        val = BCM_PCI_MEM_BASE_PA & MPI_L2P_BASE_MASK;
 230        bcm_mpi_writel(val, MPI_L2PMEMBASE1_REG);
 231        bcm_mpi_writel(~(BCM_PCI_MEM_SIZE - 1), MPI_L2PMEMRANGE1_REG);
 232        bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PMEMREMAP1_REG);
 233
 234        /* set Cardbus IDSEL (type 0 cfg access on primary bus for
 235         * this IDSEL will be done on Cardbus instead) */
 236        val = bcm_pcmcia_readl(PCMCIA_C1_REG);
 237        val &= ~PCMCIA_C1_CBIDSEL_MASK;
 238        val |= (CARDBUS_PCI_IDSEL << PCMCIA_C1_CBIDSEL_SHIFT);
 239        bcm_pcmcia_writel(val, PCMCIA_C1_REG);
 240
 241#ifdef CONFIG_CARDBUS
 242        /* setup local bus to PCI access (Cardbus memory) */
 243        val = BCM_CB_MEM_BASE_PA & MPI_L2P_BASE_MASK;
 244        bcm_mpi_writel(val, MPI_L2PMEMBASE2_REG);
 245        bcm_mpi_writel(~(BCM_CB_MEM_SIZE - 1), MPI_L2PMEMRANGE2_REG);
 246        val |= MPI_L2PREMAP_ENABLED_MASK | MPI_L2PREMAP_IS_CARDBUS_MASK;
 247        bcm_mpi_writel(val, MPI_L2PMEMREMAP2_REG);
 248#else
 249        /* disable second access windows */
 250        bcm_mpi_writel(0, MPI_L2PMEMREMAP2_REG);
 251#endif
 252
 253        /* setup local bus  to PCI access (IO memory),  we have only 1
 254         * IO window  for both PCI  and cardbus, but it  cannot handle
 255         * both  at the  same time,  assume standard  PCI for  now, if
 256         * cardbus card has  IO zone, PCI fixup will  change window to
 257         * cardbus */
 258        val = BCM_PCI_IO_BASE_PA & MPI_L2P_BASE_MASK;
 259        bcm_mpi_writel(val, MPI_L2PIOBASE_REG);
 260        bcm_mpi_writel(~(BCM_PCI_IO_SIZE - 1), MPI_L2PIORANGE_REG);
 261        bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PIOREMAP_REG);
 262
 263        /* enable PCI related GPIO pins */
 264        bcm_mpi_writel(MPI_LOCBUSCTL_EN_PCI_GPIO_MASK, MPI_LOCBUSCTL_REG);
 265
 266        /* setup PCI to local bus access, used by PCI device to target
 267         * local RAM while bus mastering */
 268        bcm63xx_int_cfg_writel(0, PCI_BASE_ADDRESS_3);
 269        if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6368())
 270                val = MPI_SP0_REMAP_ENABLE_MASK;
 271        else
 272                val = 0;
 273        bcm_mpi_writel(val, MPI_SP0_REMAP_REG);
 274
 275        bcm63xx_int_cfg_writel(0x0, PCI_BASE_ADDRESS_4);
 276        bcm_mpi_writel(0, MPI_SP1_REMAP_REG);
 277
 278        mem_size = bcm63xx_get_memory_size();
 279
 280        /* 6348 before rev b0 exposes only 16 MB of RAM memory through
 281         * PCI, throw a warning if we have more memory */
 282        if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() & 0xf0) == 0xa0) {
 283                if (mem_size > (16 * 1024 * 1024))
 284                        printk(KERN_WARNING "bcm63xx: this CPU "
 285                               "revision cannot handle more than 16MB "
 286                               "of RAM for PCI bus mastering\n");
 287        } else {
 288                /* setup sp0 range to local RAM size */
 289                bcm_mpi_writel(~(mem_size - 1), MPI_SP0_RANGE_REG);
 290                bcm_mpi_writel(0, MPI_SP1_RANGE_REG);
 291        }
 292
 293        /* change  host bridge  retry  counter to  infinite number  of
 294         * retry,  needed for  some broadcom  wifi cards  with Silicon
 295         * Backplane bus where access to srom seems very slow  */
 296        val = bcm63xx_int_cfg_readl(BCMPCI_REG_TIMERS);
 297        val &= ~REG_TIMER_RETRY_MASK;
 298        bcm63xx_int_cfg_writel(val, BCMPCI_REG_TIMERS);
 299
 300        /* enable memory decoder and bus mastering */
 301        val = bcm63xx_int_cfg_readl(PCI_COMMAND);
 302        val |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
 303        bcm63xx_int_cfg_writel(val, PCI_COMMAND);
 304
 305        /* enable read prefetching & disable byte swapping for bus
 306         * mastering transfers */
 307        val = bcm_mpi_readl(MPI_PCIMODESEL_REG);
 308        val &= ~MPI_PCIMODESEL_BAR1_NOSWAP_MASK;
 309        val &= ~MPI_PCIMODESEL_BAR2_NOSWAP_MASK;
 310        val &= ~MPI_PCIMODESEL_PREFETCH_MASK;
 311        val |= (8 << MPI_PCIMODESEL_PREFETCH_SHIFT);
 312        bcm_mpi_writel(val, MPI_PCIMODESEL_REG);
 313
 314        /* enable pci interrupt */
 315        val = bcm_mpi_readl(MPI_LOCINT_REG);
 316        val |= MPI_LOCINT_MASK(MPI_LOCINT_EXT_PCI_INT);
 317        bcm_mpi_writel(val, MPI_LOCINT_REG);
 318
 319        register_pci_controller(&bcm63xx_controller);
 320
 321#ifdef CONFIG_CARDBUS
 322        register_pci_controller(&bcm63xx_cb_controller);
 323#endif
 324
 325        /* mark memory space used for IO mapping as reserved */
 326        request_mem_region(BCM_PCI_IO_BASE_PA, BCM_PCI_IO_SIZE,
 327                           "bcm63xx PCI IO space");
 328        return 0;
 329}
 330
 331
 332static int __init bcm63xx_pci_init(void)
 333{
 334        if (!bcm63xx_pci_enabled)
 335                return -ENODEV;
 336
 337        switch (bcm63xx_get_cpu_id()) {
 338        case BCM6328_CPU_ID:
 339        case BCM6362_CPU_ID:
 340                return bcm63xx_register_pcie();
 341        case BCM3368_CPU_ID:
 342        case BCM6348_CPU_ID:
 343        case BCM6358_CPU_ID:
 344        case BCM6368_CPU_ID:
 345                return bcm63xx_register_pci();
 346        default:
 347                return -ENODEV;
 348        }
 349}
 350
 351arch_initcall(bcm63xx_pci_init);
 352