/*
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
 * Copyright (C) 2014 Kevin Cernekee <cernekee@gmail.com>
 */

#include <linux/init.h>
#include <linux/bitops.h>
#include <linux/memblock.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_clk.h>
#include <linux/of_fdt.h>
#include <linux/of_platform.h>
#include <linux/libfdt.h>
#include <linux/smp.h>
#include <asm/addrspace.h>
#include <asm/bmips.h>
#include <asm/bootinfo.h>
#include <asm/cpu-type.h>
#include <asm/mipsregs.h>
#include <asm/prom.h>
#include <asm/smp-ops.h>
#include <asm/time.h>
#include <asm/traps.h>

#define RELO_NORMAL_VEC         BIT(18)

#define REG_BCM6328_OTP         ((void __iomem *)CKSEG1ADDR(0x1000062c))
#define BCM6328_TP1_DISABLED    BIT(9)

static const unsigned long kbase = VMLINUX_LOAD_ADDRESS & 0xfff00000;

struct bmips_quirk {
        const char              *compatible;
        void                    (*quirk_fn)(void);
};

static void kbase_setup(void)
{
        __raw_writel(kbase | RELO_NORMAL_VEC,
                     BMIPS_GET_CBR() + BMIPS_RELO_VECTOR_CONTROL_1);
        ebase = kbase;
}

static void bcm3384_viper_quirks(void)
{
        /*
         * Some experimental CM boxes are set up to let CM own the Viper TP0
         * and let Linux own TP1.  This requires moving the kernel
         * load address to a non-conflicting region (e.g. via
         * CONFIG_PHYSICAL_START) and supplying an alternate DTB.
         * If we detect this condition, we need to move the MIPS exception
         * vectors up to an area that we own.
         *
         * This is distinct from the OTHER special case mentioned in
         * smp-bmips.c (boot on TP1, but enable SMP, then TP0 becomes our
         * logical CPU#1).  For the Viper TP1 case, SMP is off limits.
         *
         * Also note that many BMIPS435x CPUs do not have a
         * BMIPS_RELO_VECTOR_CONTROL_1 register, so it isn't safe to just
         * write VMLINUX_LOAD_ADDRESS into that register on every SoC.
         */
        board_ebase_setup = &kbase_setup;
        bmips_smp_enabled = 0;
}

static void bcm63xx_fixup_cpu1(void)
{
        /*
         * The bootloader has set up the CPU1 reset vector at
         * 0xa000_0200.
         * This conflicts with the special interrupt vector (IV).
         * The bootloader has also set up CPU1 to respond to the wrong
         * IPI interrupt.
         * Here we will start up CPU1 in the background and ask it to
         * reconfigure itself then go back to sleep.
         */
        memcpy((void *)0xa0000200, &bmips_smp_movevec, 0x20);
        __sync();
        set_c0_cause(C_SW0);
        cpumask_set_cpu(1, &bmips_booted_mask);
}

static void bcm6328_quirks(void)
{
        /* Check CPU1 status in OTP (it is usually disabled) */
        if (__raw_readl(REG_BCM6328_OTP) & BCM6328_TP1_DISABLED)
                bmips_smp_enabled = 0;
        else
                bcm63xx_fixup_cpu1();
}

static void bcm6358_quirks(void)
{
        /*
         * BCM3368/BCM6358 need special handling for their shared TLB, so
         * disable SMP for now
         */
        bmips_smp_enabled = 0;
}

static void bcm6368_quirks(void)
{
        bcm63xx_fixup_cpu1();
}

static const struct bmips_quirk bmips_quirk_list[] = {
        { "brcm,bcm3368",               &bcm6358_quirks                 },
        { "brcm,bcm3384-viper",         &bcm3384_viper_quirks           },
        { "brcm,bcm33843-viper",        &bcm3384_viper_quirks           },
        { "brcm,bcm6328",               &bcm6328_quirks                 },
        { "brcm,bcm6358",               &bcm6358_quirks                 },
        { "brcm,bcm6362",               &bcm6368_quirks                 },
        { "brcm,bcm6368",               &bcm6368_quirks                 },
        { "brcm,bcm63168",              &bcm6368_quirks                 },
        { "brcm,bcm63268",              &bcm6368_quirks                 },
        { },
};

void __init prom_init(void)
{
        bmips_cpu_setup();
        register_bmips_smp_ops();
}

const char *get_system_type(void)
{
        return "Generic BMIPS kernel";
}

void __init plat_time_init(void)
{
        struct device_node *np;
        u32 freq;

        np = of_find_node_by_name(NULL, "cpus");
        if (!np)
                panic("missing 'cpus' DT node");
        if (of_property_read_u32(np, "mips-hpt-frequency", &freq) < 0)
                panic("missing 'mips-hpt-frequency' property");
        of_node_put(np);

        mips_hpt_frequency = freq;
}

void __init plat_mem_setup(void)
{
        void *dtb;
        const struct bmips_quirk *q;

        set_io_port_base(0);
        ioport_resource.start = 0;
        ioport_resource.end = ~0;

        /* intended to somewhat resemble ARM; see Documentation/arm/booting.rst */
        if (fw_arg0 == 0 && fw_arg1 == 0xffffffff)
                dtb = phys_to_virt(fw_arg2);
        else
                dtb = get_fdt();

        if (!dtb)
                panic("no dtb found");

        __dt_setup_arch(dtb);

        for (q = bmips_quirk_list; q->quirk_fn; q++) {
                if (of_flat_dt_is_compatible(of_get_flat_dt_root(),
                                             q->compatible)) {
                        q->quirk_fn();
                }
        }
}

void __init device_tree_init(void)
{
        struct device_node *np;

        unflatten_and_copy_device_tree();

        /* Disable SMP boot unless both CPUs are listed in DT and !disabled */
        np = of_find_node_by_name(NULL, "cpus");
        if (np && of_get_available_child_count(np) <= 1)
                bmips_smp_enabled = 0;
        of_node_put(np);
}

static int __init plat_dev_init(void)
{
        of_clk_init(NULL);
        return 0;
}

arch_initcall(plat_dev_init);