1
2
3
4
5
6
7
8
9#include <linux/clk.h>
10#include <linux/console.h>
11#include <linux/io.h>
12#include <linux/libfdt.h>
13#include <linux/module.h>
14#include <linux/of.h>
15#include <linux/of_fdt.h>
16#include <linux/of_device.h>
17#include <linux/platform_device.h>
18#include <linux/serial_8250.h>
19#include <linux/serial_core.h>
20#include <linux/serial_reg.h>
21
22#include "8250.h"
23
24
25struct ingenic_uart_config {
26 int tx_loadsz;
27 int fifosize;
28};
29
30struct ingenic_uart_data {
31 struct clk *clk_module;
32 struct clk *clk_baud;
33 int line;
34};
35
36static const struct of_device_id of_match[];
37
38#define UART_FCR_UME BIT(4)
39
40#define UART_MCR_MDCE BIT(7)
41#define UART_MCR_FCM BIT(6)
42
43static struct earlycon_device *early_device;
44
45static uint8_t early_in(struct uart_port *port, int offset)
46{
47 return readl(port->membase + (offset << 2));
48}
49
50static void early_out(struct uart_port *port, int offset, uint8_t value)
51{
52 writel(value, port->membase + (offset << 2));
53}
54
55static void ingenic_early_console_putc(struct uart_port *port, int c)
56{
57 uint8_t lsr;
58
59 do {
60 lsr = early_in(port, UART_LSR);
61 } while ((lsr & UART_LSR_TEMT) == 0);
62
63 early_out(port, UART_TX, c);
64}
65
66static void ingenic_early_console_write(struct console *console,
67 const char *s, unsigned int count)
68{
69 uart_console_write(&early_device->port, s, count,
70 ingenic_early_console_putc);
71}
72
73static void __init ingenic_early_console_setup_clock(struct earlycon_device *dev)
74{
75 void *fdt = initial_boot_params;
76 const __be32 *prop;
77 int offset;
78
79 offset = fdt_path_offset(fdt, "/ext");
80 if (offset < 0)
81 return;
82
83 prop = fdt_getprop(fdt, offset, "clock-frequency", NULL);
84 if (!prop)
85 return;
86
87 dev->port.uartclk = be32_to_cpup(prop);
88}
89
90static int __init ingenic_early_console_setup(struct earlycon_device *dev,
91 const char *opt)
92{
93 struct uart_port *port = &dev->port;
94 unsigned int divisor;
95 int baud = 115200;
96
97 if (!dev->port.membase)
98 return -ENODEV;
99
100 if (opt) {
101 unsigned int parity, bits, flow;
102
103 uart_parse_options(opt, &baud, &parity, &bits, &flow);
104 }
105
106 ingenic_early_console_setup_clock(dev);
107
108 if (dev->baud)
109 baud = dev->baud;
110 divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * baud);
111
112 early_out(port, UART_IER, 0);
113 early_out(port, UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN8);
114 early_out(port, UART_DLL, 0);
115 early_out(port, UART_DLM, 0);
116 early_out(port, UART_LCR, UART_LCR_WLEN8);
117 early_out(port, UART_FCR, UART_FCR_UME | UART_FCR_CLEAR_XMIT |
118 UART_FCR_CLEAR_RCVR | UART_FCR_ENABLE_FIFO);
119 early_out(port, UART_MCR, UART_MCR_RTS | UART_MCR_DTR);
120
121 early_out(port, UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN8);
122 early_out(port, UART_DLL, divisor & 0xff);
123 early_out(port, UART_DLM, (divisor >> 8) & 0xff);
124 early_out(port, UART_LCR, UART_LCR_WLEN8);
125
126 early_device = dev;
127 dev->con->write = ingenic_early_console_write;
128
129 return 0;
130}
131
132OF_EARLYCON_DECLARE(jz4740_uart, "ingenic,jz4740-uart",
133 ingenic_early_console_setup);
134
135OF_EARLYCON_DECLARE(jz4770_uart, "ingenic,jz4770-uart",
136 ingenic_early_console_setup);
137
138OF_EARLYCON_DECLARE(jz4775_uart, "ingenic,jz4775-uart",
139 ingenic_early_console_setup);
140
141OF_EARLYCON_DECLARE(jz4780_uart, "ingenic,jz4780-uart",
142 ingenic_early_console_setup);
143
144OF_EARLYCON_DECLARE(x1000_uart, "ingenic,x1000-uart",
145 ingenic_early_console_setup);
146
147static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value)
148{
149 int ier;
150
151 switch (offset) {
152 case UART_FCR:
153
154 value |= UART_FCR_UME;
155 break;
156
157 case UART_IER:
158
159
160
161
162 value |= (value & 0x4) << 2;
163 break;
164
165 case UART_MCR:
166
167
168
169
170 ier = p->serial_in(p, UART_IER);
171
172 if (ier & UART_IER_MSI)
173 value |= UART_MCR_MDCE | UART_MCR_FCM;
174 else
175 value &= ~(UART_MCR_MDCE | UART_MCR_FCM);
176 break;
177
178 default:
179 break;
180 }
181
182 writeb(value, p->membase + (offset << p->regshift));
183}
184
185static unsigned int ingenic_uart_serial_in(struct uart_port *p, int offset)
186{
187 unsigned int value;
188
189 value = readb(p->membase + (offset << p->regshift));
190
191
192 switch (offset) {
193 case UART_FCR:
194 value &= ~UART_FCR_UME;
195 break;
196
197 case UART_MCR:
198 value &= ~(UART_MCR_MDCE | UART_MCR_FCM);
199 break;
200
201 default:
202 break;
203 }
204 return value;
205}
206
207static int ingenic_uart_probe(struct platform_device *pdev)
208{
209 struct uart_8250_port uart = {};
210 struct ingenic_uart_data *data;
211 const struct ingenic_uart_config *cdata;
212 const struct of_device_id *match;
213 struct resource *regs;
214 int irq, err, line;
215
216 match = of_match_device(of_match, &pdev->dev);
217 if (!match) {
218 dev_err(&pdev->dev, "Error: No device match found\n");
219 return -ENODEV;
220 }
221 cdata = match->data;
222
223 irq = platform_get_irq(pdev, 0);
224 if (irq < 0)
225 return irq;
226
227 regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
228 if (!regs) {
229 dev_err(&pdev->dev, "no registers defined\n");
230 return -EINVAL;
231 }
232
233 data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
234 if (!data)
235 return -ENOMEM;
236
237 spin_lock_init(&uart.port.lock);
238 uart.port.type = PORT_16550A;
239 uart.port.flags = UPF_SKIP_TEST | UPF_IOREMAP | UPF_FIXED_TYPE;
240 uart.port.iotype = UPIO_MEM;
241 uart.port.mapbase = regs->start;
242 uart.port.regshift = 2;
243 uart.port.serial_out = ingenic_uart_serial_out;
244 uart.port.serial_in = ingenic_uart_serial_in;
245 uart.port.irq = irq;
246 uart.port.dev = &pdev->dev;
247 uart.port.fifosize = cdata->fifosize;
248 uart.tx_loadsz = cdata->tx_loadsz;
249 uart.capabilities = UART_CAP_FIFO | UART_CAP_RTOIE;
250
251
252 line = of_alias_get_id(pdev->dev.of_node, "serial");
253 if (line >= 0)
254 uart.port.line = line;
255
256 uart.port.membase = devm_ioremap(&pdev->dev, regs->start,
257 resource_size(regs));
258 if (!uart.port.membase)
259 return -ENOMEM;
260
261 data->clk_module = devm_clk_get(&pdev->dev, "module");
262 if (IS_ERR(data->clk_module))
263 return dev_err_probe(&pdev->dev, PTR_ERR(data->clk_module),
264 "unable to get module clock\n");
265
266 data->clk_baud = devm_clk_get(&pdev->dev, "baud");
267 if (IS_ERR(data->clk_baud))
268 return dev_err_probe(&pdev->dev, PTR_ERR(data->clk_baud),
269 "unable to get baud clock\n");
270
271 err = clk_prepare_enable(data->clk_module);
272 if (err) {
273 dev_err(&pdev->dev, "could not enable module clock: %d\n", err);
274 goto out;
275 }
276
277 err = clk_prepare_enable(data->clk_baud);
278 if (err) {
279 dev_err(&pdev->dev, "could not enable baud clock: %d\n", err);
280 goto out_disable_moduleclk;
281 }
282 uart.port.uartclk = clk_get_rate(data->clk_baud);
283
284 data->line = serial8250_register_8250_port(&uart);
285 if (data->line < 0) {
286 err = data->line;
287 goto out_disable_baudclk;
288 }
289
290 platform_set_drvdata(pdev, data);
291 return 0;
292
293out_disable_baudclk:
294 clk_disable_unprepare(data->clk_baud);
295out_disable_moduleclk:
296 clk_disable_unprepare(data->clk_module);
297out:
298 return err;
299}
300
301static int ingenic_uart_remove(struct platform_device *pdev)
302{
303 struct ingenic_uart_data *data = platform_get_drvdata(pdev);
304
305 serial8250_unregister_port(data->line);
306 clk_disable_unprepare(data->clk_module);
307 clk_disable_unprepare(data->clk_baud);
308 return 0;
309}
310
311static const struct ingenic_uart_config jz4740_uart_config = {
312 .tx_loadsz = 8,
313 .fifosize = 16,
314};
315
316static const struct ingenic_uart_config jz4760_uart_config = {
317 .tx_loadsz = 16,
318 .fifosize = 32,
319};
320
321static const struct ingenic_uart_config jz4780_uart_config = {
322 .tx_loadsz = 32,
323 .fifosize = 64,
324};
325
326static const struct ingenic_uart_config x1000_uart_config = {
327 .tx_loadsz = 32,
328 .fifosize = 64,
329};
330
331static const struct of_device_id of_match[] = {
332 { .compatible = "ingenic,jz4740-uart", .data = &jz4740_uart_config },
333 { .compatible = "ingenic,jz4760-uart", .data = &jz4760_uart_config },
334 { .compatible = "ingenic,jz4770-uart", .data = &jz4760_uart_config },
335 { .compatible = "ingenic,jz4775-uart", .data = &jz4760_uart_config },
336 { .compatible = "ingenic,jz4780-uart", .data = &jz4780_uart_config },
337 { .compatible = "ingenic,x1000-uart", .data = &x1000_uart_config },
338 { }
339};
340MODULE_DEVICE_TABLE(of, of_match);
341
342static struct platform_driver ingenic_uart_platform_driver = {
343 .driver = {
344 .name = "ingenic-uart",
345 .of_match_table = of_match,
346 },
347 .probe = ingenic_uart_probe,
348 .remove = ingenic_uart_remove,
349};
350
351module_platform_driver(ingenic_uart_platform_driver);
352
353MODULE_AUTHOR("Paul Burton");
354MODULE_LICENSE("GPL");
355MODULE_DESCRIPTION("Ingenic SoC UART driver");
356
