LXR linux/arch/arm/kernel/irq.c

   1// SPDX-License-Identifier: GPL-2.0-only
   2/*
   3 *  linux/arch/arm/kernel/irq.c
   4 *
   5 *  Copyright (C) 1992 Linus Torvalds
   6 *  Modifications for ARM processor Copyright (C) 1995-2000 Russell King.
   7 *
   8 *  Support for Dynamic Tick Timer Copyright (C) 2004-2005 Nokia Corporation.
   9 *  Dynamic Tick Timer written by Tony Lindgren <tony@atomide.com> and
  10 *  Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>.
  11 *
  12 *  This file contains the code used by various IRQ handling routines:
  13 *  asking for different IRQ's should be done through these routines
  14 *  instead of just grabbing them. Thus setups with different IRQ numbers
  15 *  shouldn't result in any weird surprises, and installing new handlers
  16 *  should be easier.
  17 *
  18 *  IRQ's are in fact implemented a bit like signal handlers for the kernel.
  19 *  Naturally it's not a 1:1 relation, but there are similarities.
  20 */
  21#include <linux/signal.h>
  22#include <linux/ioport.h>
  23#include <linux/interrupt.h>
  24#include <linux/irq.h>
  25#include <linux/irqchip.h>
  26#include <linux/random.h>
  27#include <linux/smp.h>
  28#include <linux/init.h>
  29#include <linux/seq_file.h>
  30#include <linux/errno.h>
  31#include <linux/list.h>
  32#include <linux/kallsyms.h>
  33#include <linux/proc_fs.h>
  34#include <linux/export.h>
  35
  36#include <asm/hardware/cache-l2x0.h>
  37#include <asm/hardware/cache-uniphier.h>
  38#include <asm/outercache.h>
  39#include <asm/exception.h>
  40#include <asm/mach/arch.h>
  41#include <asm/mach/irq.h>
  42#include <asm/mach/time.h>
  43
  44unsigned long irq_err_count;
  45
  46int arch_show_interrupts(struct seq_file *p, int prec)
  47{
  48#ifdef CONFIG_FIQ
  49        show_fiq_list(p, prec);
  50#endif
  51#ifdef CONFIG_SMP
  52        show_ipi_list(p, prec);
  53#endif
  54        seq_printf(p, "%*s: %10lu\n", prec, "Err", irq_err_count);
  55        return 0;
  56}
  57
  58/*
  59 * handle_IRQ handles all hardware IRQ's.  Decoded IRQs should
  60 * not come via this function.  Instead, they should provide their
  61 * own 'handler'.  Used by platform code implementing C-based 1st
  62 * level decoding.
  63 */
  64void handle_IRQ(unsigned int irq, struct pt_regs *regs)
  65{
  66        __handle_domain_irq(NULL, irq, false, regs);
  67}
  68
  69/*
  70 * asm_do_IRQ is the interface to be used from assembly code.
  71 */
  72asmlinkage void __exception_irq_entry
  73asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
  74{
  75        handle_IRQ(irq, regs);
  76}
  77
  78void __init init_IRQ(void)
  79{
  80        int ret;
  81
  82        if (IS_ENABLED(CONFIG_OF) && !machine_desc->init_irq)
  83                irqchip_init();
  84        else
  85                machine_desc->init_irq();
  86
  87        if (IS_ENABLED(CONFIG_OF) && IS_ENABLED(CONFIG_CACHE_L2X0) &&
  88            (machine_desc->l2c_aux_mask || machine_desc->l2c_aux_val)) {
  89                if (!outer_cache.write_sec)
  90                        outer_cache.write_sec = machine_desc->l2c_write_sec;
  91                ret = l2x0_of_init(machine_desc->l2c_aux_val,
  92                                   machine_desc->l2c_aux_mask);
  93                if (ret && ret != -ENODEV)
  94                        pr_err("L2C: failed to init: %d\n", ret);
  95        }
  96
  97        uniphier_cache_init();
  98}
  99
 100#ifdef CONFIG_SPARSE_IRQ
 101int __init arch_probe_nr_irqs(void)
 102{
 103        nr_irqs = machine_desc->nr_irqs ? machine_desc->nr_irqs : NR_IRQS;
 104        return nr_irqs;
 105}
 106#endif
 107