linux/Documentation/arm/Samsung-S3C24XX/SMDK2440.txt
<<
>>
Prefs
   1                Samsung/Meritech SMDK2440
   2                =========================
   3
   4Introduction
   5------------
   6
   7  The SMDK2440 is a two part evaluation board for the Samsung S3C2440
   8  processor. It includes support for LCD, SmartMedia, Audio, SD and
   9  10MBit Ethernet, and expansion headers for various signals, including
  10  the camera and unused GPIO.
  11
  12
  13Configuration
  14-------------
  15
  16  To set the default configuration, use `make smdk2440_defconfig` which
  17  will configure the common features of this board, or use
  18  `make s3c2410_config` to include support for all s3c2410/s3c2440 machines
  19
  20
  21Support
  22-------
  23
  24  Ben Dooks' SMDK2440 site at http://www.fluff.org/ben/smdk2440/ which
  25  includes linux based USB download tools.
  26
  27  Some of the h1940 patches that can be found from the H1940 project
  28  site at http://www.handhelds.org/projects/h1940.html can also be
  29  applied to this board.
  30
  31
  32Peripherals
  33-----------
  34
  35  There is no current support for any of the extra peripherals on the
  36  base-board itself.
  37
  38
  39MTD
  40---
  41
  42  The NAND flash should be supported by the in kernel MTD NAND support,
  43  NOR flash will be added later.
  44
  45
  46Maintainers
  47-----------
  48
  49  This board is being maintained by Ben Dooks, for more info, see
  50  http://www.fluff.org/ben/smdk2440/
  51
  52  Many thanks to Dimitry Andric of TomTom for the loan of the SMDK2440,
  53  and to Simtec Electronics for allowing me time to work on this.
  54
  55
  56(c) 2004 Ben Dooks
  57