linux/Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt
<<
>>
Prefs
   1                Simtec Electronics EB2410ITX (BAST)
   2                ===================================
   3
   4        http://www.simtec.co.uk/products/EB2410ITX/
   5
   6Introduction
   7------------
   8
   9  The EB2410ITX is a S3C2410 based development board with a variety of
  10  peripherals and expansion connectors. This board is also known by
  11  the shortened name of Bast.
  12
  13
  14Configuration
  15-------------
  16
  17  To set the default configuration, use `make bast_defconfig` which
  18  supports the commonly used features of this board.
  19
  20
  21Support
  22-------
  23
  24  Official support information can be found on the Simtec Electronics
  25  website, at the product page http://www.simtec.co.uk/products/EB2410ITX/
  26
  27  Useful links:
  28
  29    - Resources Page http://www.simtec.co.uk/products/EB2410ITX/resources.html
  30
  31    - Board FAQ at http://www.simtec.co.uk/products/EB2410ITX/faq.html
  32
  33    - Bootloader info http://www.simtec.co.uk/products/SWABLE/resources.html
  34      and FAQ http://www.simtec.co.uk/products/SWABLE/faq.html
  35
  36
  37MTD
  38---
  39
  40  The NAND and NOR support has been merged from the linux-mtd project.
  41  Any problems, see http://www.linux-mtd.infradead.org/ for more
  42  information or up-to-date versions of linux-mtd.
  43
  44
  45IDE
  46---
  47
  48  Both onboard IDE ports are supported, however there is no support for
  49  changing speed of devices, PIO Mode 4 capable drives should be used.
  50
  51
  52Maintainers
  53-----------
  54
  55  This board is maintained by Simtec Electronics.
  56
  57
  58Copyright 2004 Ben Dooks, Simtec Electronics
  59