/******************************************************************************
 * This file contains error recovery level zero functions used by
 * the iSCSI Target driver.
 *
 * \u00a9 Copyright 2007-2011 RisingTide Systems LLC.
 *
 * Licensed to the Linux Foundation under the General Public License (GPL) version 2.
 *
 * Author: Nicholas A. Bellinger <nab@linux-iscsi.org>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 ******************************************************************************/

#include <scsi/iscsi_proto.h>
#include <target/target_core_base.h>
#include <target/target_core_fabric.h>

#include "iscsi_target_core.h"
#include "iscsi_target_seq_pdu_list.h"
#include "iscsi_target_tq.h"
#include "iscsi_target_erl0.h"
#include "iscsi_target_erl1.h"
#include "iscsi_target_erl2.h"
#include "iscsi_target_util.h"
#include "iscsi_target.h"

/*
 *      Used to set values in struct iscsi_cmd that iscsit_dataout_check_sequence()
 *      checks against to determine a PDU's Offset+Length is within the current
 *      DataOUT Sequence.  Used for DataSequenceInOrder=Yes only.
 */
void iscsit_set_dataout_sequence_values(
        struct iscsi_cmd *cmd)
{
        struct iscsi_conn *conn = cmd->conn;
        /*
         * Still set seq_start_offset and seq_end_offset for Unsolicited
         * DataOUT, even if DataSequenceInOrder=No.
         */
        if (cmd->unsolicited_data) {
                cmd->seq_start_offset = cmd->write_data_done;
                cmd->seq_end_offset = (cmd->write_data_done +
                        (cmd->data_length >
                         conn->sess->sess_ops->FirstBurstLength) ?
                        conn->sess->sess_ops->FirstBurstLength : cmd->data_length);
                return;
        }

        if (!conn->sess->sess_ops->DataSequenceInOrder)
                return;

        if (!cmd->seq_start_offset && !cmd->seq_end_offset) {
                cmd->seq_start_offset = cmd->write_data_done;
                cmd->seq_end_offset = (cmd->data_length >
                        conn->sess->sess_ops->MaxBurstLength) ?
                        (cmd->write_data_done +
                        conn->sess->sess_ops->MaxBurstLength) : cmd->data_length;
        } else {
                cmd->seq_start_offset = cmd->seq_end_offset;
                cmd->seq_end_offset = ((cmd->seq_end_offset +
                        conn->sess->sess_ops->MaxBurstLength) >=
                        cmd->data_length) ? cmd->data_length :
                        (cmd->seq_end_offset +
                         conn->sess->sess_ops->MaxBurstLength);
        }
}

static int iscsit_dataout_within_command_recovery_check(
        struct iscsi_cmd *cmd,
        unsigned char *buf)
{
        struct iscsi_conn *conn = cmd->conn;
        struct iscsi_data *hdr = (struct iscsi_data *) buf;
        u32 payload_length = ntoh24(hdr->dlength);

        /*
         * We do the within-command recovery checks here as it is
         * the first function called in iscsi_check_pre_dataout().
         * Basically, if we are in within-command recovery and
         * the PDU does not contain the offset the sequence needs,
         * dump the payload.
         *
         * This only applies to DataPDUInOrder=Yes, for
         * DataPDUInOrder=No we only re-request the failed PDU
         * and check that all PDUs in a sequence are received
         * upon end of sequence.
         */
        if (conn->sess->sess_ops->DataSequenceInOrder) {
                if ((cmd->cmd_flags & ICF_WITHIN_COMMAND_RECOVERY) &&
                    (cmd->write_data_done != hdr->offset))
                        goto dump;

                cmd->cmd_flags &= ~ICF_WITHIN_COMMAND_RECOVERY;
        } else {
                struct iscsi_seq *seq;

                seq = iscsit_get_seq_holder(cmd, hdr->offset, payload_length);
                if (!seq)
                        return DATAOUT_CANNOT_RECOVER;
                /*
                 * Set the struct iscsi_seq pointer to reuse later.
                 */
                cmd->seq_ptr = seq;

                if (conn->sess->sess_ops->DataPDUInOrder) {
                        if ((seq->status ==
                             DATAOUT_SEQUENCE_WITHIN_COMMAND_RECOVERY) &&
                           ((seq->offset != hdr->offset) ||
                            (seq->data_sn != hdr->datasn)))
                                goto dump;
                } else {
                        if ((seq->status ==
                             DATAOUT_SEQUENCE_WITHIN_COMMAND_RECOVERY) &&
                            (seq->data_sn != hdr->datasn))
                                goto dump;
                }

                if (seq->status == DATAOUT_SEQUENCE_COMPLETE)
                        goto dump;

                if (seq->status != DATAOUT_SEQUENCE_COMPLETE)
                        seq->status = 0;
        }

        return DATAOUT_NORMAL;

dump:
        pr_err("Dumping DataOUT PDU Offset: %u Length: %d DataSN:"
                " 0x%08x\n", hdr->offset, payload_length, hdr->datasn);
        return iscsit_dump_data_payload(conn, payload_length, 1);
}

static int iscsit_dataout_check_unsolicited_sequence(
        struct iscsi_cmd *cmd,
        unsigned char *buf)
{
        u32 first_burst_len;
        struct iscsi_conn *conn = cmd->conn;
        struct iscsi_data *hdr = (struct iscsi_data *) buf;
        u32 payload_length = ntoh24(hdr->dlength);


        if ((hdr->offset < cmd->seq_start_offset) ||
           ((hdr->offset + payload_length) > cmd->seq_end_offset)) {
                pr_err("Command ITT: 0x%08x with Offset: %u,"
                " Length: %u outside of Unsolicited Sequence %u:%u while"
                " DataSequenceInOrder=Yes.\n", cmd->init_task_tag,
                hdr->offset, payload_length, cmd->seq_start_offset,
                        cmd->seq_end_offset);
                return DATAOUT_CANNOT_RECOVER;
        }

        first_burst_len = (cmd->first_burst_len + payload_length);

        if (first_burst_len > conn->sess->sess_ops->FirstBurstLength) {
                pr_err("Total %u bytes exceeds FirstBurstLength: %u"
                        " for this Unsolicited DataOut Burst.\n",
                        first_burst_len, conn->sess->sess_ops->FirstBurstLength);
                transport_send_check_condition_and_sense(&cmd->se_cmd,
                                TCM_INCORRECT_AMOUNT_OF_DATA, 0);
                return DATAOUT_CANNOT_RECOVER;
        }

        /*
         * Perform various MaxBurstLength and ISCSI_FLAG_CMD_FINAL sanity
         * checks for the current Unsolicited DataOUT Sequence.
         */
        if (hdr->flags & ISCSI_FLAG_CMD_FINAL) {
                /*
                 * Ignore ISCSI_FLAG_CMD_FINAL checks while DataPDUInOrder=No, end of
                 * sequence checks are handled in
                 * iscsit_dataout_datapduinorder_no_fbit().
                 */
                if (!conn->sess->sess_ops->DataPDUInOrder)
                        goto out;

                if ((first_burst_len != cmd->data_length) &&
                    (first_burst_len != conn->sess->sess_ops->FirstBurstLength)) {
                        pr_err("Unsolicited non-immediate data"
                        " received %u does not equal FirstBurstLength: %u, and"
                        " does not equal ExpXferLen %u.\n", first_burst_len,
                                conn->sess->sess_ops->FirstBurstLength,
                                cmd->data_length);
                        transport_send_check_condition_and_sense(&cmd->se_cmd,
                                        TCM_INCORRECT_AMOUNT_OF_DATA, 0);
                        return DATAOUT_CANNOT_RECOVER;
                }
        } else {
                if (first_burst_len == conn->sess->sess_ops->FirstBurstLength) {
                        pr_err("Command ITT: 0x%08x reached"
                        " FirstBurstLength: %u, but ISCSI_FLAG_CMD_FINAL is not set. protocol"
                                " error.\n", cmd->init_task_tag,
                                conn->sess->sess_ops->FirstBurstLength);
                        return DATAOUT_CANNOT_RECOVER;
                }
                if (first_burst_len == cmd->data_length) {
                        pr_err("Command ITT: 0x%08x reached"
                        " ExpXferLen: %u, but ISCSI_FLAG_CMD_FINAL is not set. protocol"
                        " error.\n", cmd->init_task_tag, cmd->data_length);
                        return DATAOUT_CANNOT_RECOVER;
                }
        }

out:
        return DATAOUT_NORMAL;
}

static int iscsit_dataout_check_sequence(
        struct iscsi_cmd *cmd,
        unsigned char *buf)
{
        u32 next_burst_len;
        struct iscsi_conn *conn = cmd->conn;
        struct iscsi_seq *seq = NULL;
        struct iscsi_data *hdr = (struct iscsi_data *) buf;
        u32 payload_length = ntoh24(hdr->dlength);

        /*
         * For DataSequenceInOrder=Yes: Check that the offset and offset+length
         * is within range as defined by iscsi_set_dataout_sequence_values().
         *
         * For DataSequenceInOrder=No: Check that an struct iscsi_seq exists for
         * offset+length tuple.
         */
        if (conn->sess->sess_ops->DataSequenceInOrder) {
                /*
                 * Due to possibility of recovery DataOUT sent by the initiator
                 * fullfilling an Recovery R2T, it's best to just dump the
                 * payload here, instead of erroring out.
                 */
                if ((hdr->offset < cmd->seq_start_offset) ||
                   ((hdr->offset + payload_length) > cmd->seq_end_offset)) {
                        pr_err("Command ITT: 0x%08x with Offset: %u,"
                        " Length: %u outside of Sequence %u:%u while"
                        " DataSequenceInOrder=Yes.\n", cmd->init_task_tag,
                        hdr->offset, payload_length, cmd->seq_start_offset,
                                cmd->seq_end_offset);

                        if (iscsit_dump_data_payload(conn, payload_length, 1) < 0)
                                return DATAOUT_CANNOT_RECOVER;
                        return DATAOUT_WITHIN_COMMAND_RECOVERY;
                }

                next_burst_len = (cmd->next_burst_len + payload_length);
        } else {
                seq = iscsit_get_seq_holder(cmd, hdr->offset, payload_length);
                if (!seq)
                        return DATAOUT_CANNOT_RECOVER;
                /*
                 * Set the struct iscsi_seq pointer to reuse later.
                 */
                cmd->seq_ptr = seq;

                if (seq->status == DATAOUT_SEQUENCE_COMPLETE) {
                        if (iscsit_dump_data_payload(conn, payload_length, 1) < 0)
                                return DATAOUT_CANNOT_RECOVER;
                        return DATAOUT_WITHIN_COMMAND_RECOVERY;
                }

                next_burst_len = (seq->next_burst_len + payload_length);
        }

        if (next_burst_len > conn->sess->sess_ops->MaxBurstLength) {
                pr_err("Command ITT: 0x%08x, NextBurstLength: %u and"
                        " Length: %u exceeds MaxBurstLength: %u. protocol"
                        " error.\n", cmd->init_task_tag,
                        (next_burst_len - payload_length),
                        payload_length, conn->sess->sess_ops->MaxBurstLength);
                return DATAOUT_CANNOT_RECOVER;
        }

        /*
         * Perform various MaxBurstLength and ISCSI_FLAG_CMD_FINAL sanity
         * checks for the current DataOUT Sequence.
         */
        if (hdr->flags & ISCSI_FLAG_CMD_FINAL) {
                /*
                 * Ignore ISCSI_FLAG_CMD_FINAL checks while DataPDUInOrder=No, end of
                 * sequence checks are handled in
                 * iscsit_dataout_datapduinorder_no_fbit().
                 */
                if (!conn->sess->sess_ops->DataPDUInOrder)
                        goto out;

                if (conn->sess->sess_ops->DataSequenceInOrder) {
                        if ((next_burst_len <
                             conn->sess->sess_ops->MaxBurstLength) &&
                           ((cmd->write_data_done + payload_length) <
                             cmd->data_length)) {
                                pr_err("Command ITT: 0x%08x set ISCSI_FLAG_CMD_FINAL"
                                " before end of DataOUT sequence, protocol"
                                " error.\n", cmd->init_task_tag);
                                return DATAOUT_CANNOT_RECOVER;
                        }
                } else {
                        if (next_burst_len < seq->xfer_len) {
                                pr_err("Command ITT: 0x%08x set ISCSI_FLAG_CMD_FINAL"
                                " before end of DataOUT sequence, protocol"
                                " error.\n", cmd->init_task_tag);
                                return DATAOUT_CANNOT_RECOVER;
                        }
                }
        } else {
                if (conn->sess->sess_ops->DataSequenceInOrder) {
                        if (next_burst_len ==
                                        conn->sess->sess_ops->MaxBurstLength) {
                                pr_err("Command ITT: 0x%08x reached"
                                " MaxBurstLength: %u, but ISCSI_FLAG_CMD_FINAL is"
                                " not set, protocol error.", cmd->init_task_tag,
                                        conn->sess->sess_ops->MaxBurstLength);
                                return DATAOUT_CANNOT_RECOVER;
                        }
                        if ((cmd->write_data_done + payload_length) ==
                                        cmd->data_length) {
                                pr_err("Command ITT: 0x%08x reached"
                                " last DataOUT PDU in sequence but ISCSI_FLAG_"
                                "CMD_FINAL is not set, protocol error.\n",
                                        cmd->init_task_tag);
                                return DATAOUT_CANNOT_RECOVER;
                        }
                } else {
                        if (next_burst_len == seq->xfer_len) {
                                pr_err("Command ITT: 0x%08x reached"
                                " last DataOUT PDU in sequence but ISCSI_FLAG_"
                                "CMD_FINAL is not set, protocol error.\n",
                                        cmd->init_task_tag);
                                return DATAOUT_CANNOT_RECOVER;
                        }
                }
        }

out:
        return DATAOUT_NORMAL;
}

static int iscsit_dataout_check_datasn(
        struct iscsi_cmd *cmd,
        unsigned char *buf)
{
        int dump = 0, recovery = 0;
        u32 data_sn = 0;
        struct iscsi_conn *conn = cmd->conn;
        struct iscsi_data *hdr = (struct iscsi_data *) buf;
        u32 payload_length = ntoh24(hdr->dlength);

        /*
         * Considering the target has no method of re-requesting DataOUT
         * by DataSN, if we receieve a greater DataSN than expected we
         * assume the functions for DataPDUInOrder=[Yes,No] below will
         * handle it.
         *
         * If the DataSN is less than expected, dump the payload.
         */
        if (conn->sess->sess_ops->DataSequenceInOrder)
                data_sn = cmd->data_sn;
        else {
                struct iscsi_seq *seq = cmd->seq_ptr;
                data_sn = seq->data_sn;
        }

        if (hdr->datasn > data_sn) {
                pr_err("Command ITT: 0x%08x, received DataSN: 0x%08x"
                        " higher than expected 0x%08x.\n", cmd->init_task_tag,
                                hdr->datasn, data_sn);
                recovery = 1;
                goto recover;
        } else if (hdr->datasn < data_sn) {
                pr_err("Command ITT: 0x%08x, received DataSN: 0x%08x"
                        " lower than expected 0x%08x, discarding payload.\n",
                        cmd->init_task_tag, hdr->datasn, data_sn);
                dump = 1;
                goto dump;
        }

        return DATAOUT_NORMAL;

recover:
        if (!conn->sess->sess_ops->ErrorRecoveryLevel) {
                pr_err("Unable to perform within-command recovery"
                                " while ERL=0.\n");
                return DATAOUT_CANNOT_RECOVER;
        }
dump:
        if (iscsit_dump_data_payload(conn, payload_length, 1) < 0)
                return DATAOUT_CANNOT_RECOVER;

        return (recovery || dump) ? DATAOUT_WITHIN_COMMAND_RECOVERY :
                                DATAOUT_NORMAL;
}

static int iscsit_dataout_pre_datapduinorder_yes(
        struct iscsi_cmd *cmd,
        unsigned char *buf)
{
        int dump = 0, recovery = 0;
        struct iscsi_conn *conn = cmd->conn;
        struct iscsi_data *hdr = (struct iscsi_data *) buf;
        u32 payload_length = ntoh24(hdr->dlength);

        /*
         * For DataSequenceInOrder=Yes: If the offset is greater than the global
         * DataPDUInOrder=Yes offset counter in struct iscsi_cmd a protcol error has
         * occured and fail the connection.
         *
         * For DataSequenceInOrder=No: If the offset is greater than the per
         * sequence DataPDUInOrder=Yes offset counter in struct iscsi_seq a protocol
         * error has occured and fail the connection.
         */
        if (conn->sess->sess_ops->DataSequenceInOrder) {
                if (hdr->offset != cmd->write_data_done) {
                        pr_err("Command ITT: 0x%08x, received offset"
                        " %u different than expected %u.\n", cmd->init_task_tag,
                                hdr->offset, cmd->write_data_done);
                        recovery = 1;
                        goto recover;
                }
        } else {
                struct iscsi_seq *seq = cmd->seq_ptr;

                if (hdr->offset > seq->offset) {
                        pr_err("Command ITT: 0x%08x, received offset"
                        " %u greater than expected %u.\n", cmd->init_task_tag,
                                hdr->offset, seq->offset);
                        recovery = 1;
                        goto recover;
                } else if (hdr->offset < seq->offset) {
                        pr_err("Command ITT: 0x%08x, received offset"
                        " %u less than expected %u, discarding payload.\n",
                                cmd->init_task_tag, hdr->offset, seq->offset);
                        dump = 1;
                        goto dump;
                }
        }

        return DATAOUT_NORMAL;

recover:
        if (!conn->sess->sess_ops->ErrorRecoveryLevel) {
                pr_err("Unable to perform within-command recovery"
                                " while ERL=0.\n");
                return DATAOUT_CANNOT_RECOVER;
        }
dump:
        if (iscsit_dump_data_payload(conn, payload_length, 1) < 0)
                return DATAOUT_CANNOT_RECOVER;

        return (recovery) ? iscsit_recover_dataout_sequence(cmd,
                hdr->offset, payload_length) :
               (dump) ? DATAOUT_WITHIN_COMMAND_RECOVERY : DATAOUT_NORMAL;
}

static int iscsit_dataout_pre_datapduinorder_no(
        struct iscsi_cmd *cmd,
        unsigned char *buf)
{
        struct iscsi_pdu *pdu;
        struct iscsi_data *hdr = (struct iscsi_data *) buf;
        u32 payload_length = ntoh24(hdr->dlength);

        pdu = iscsit_get_pdu_holder(cmd, hdr->offset, payload_length);
        if (!pdu)
                return DATAOUT_CANNOT_RECOVER;

        cmd->pdu_ptr = pdu;

        switch (pdu->status) {
        case ISCSI_PDU_NOT_RECEIVED:
        case ISCSI_PDU_CRC_FAILED:
        case ISCSI_PDU_TIMED_OUT:
                break;
        case ISCSI_PDU_RECEIVED_OK:
                pr_err("Command ITT: 0x%08x received already gotten"
                        " Offset: %u, Length: %u\n", cmd->init_task_tag,
                                hdr->offset, payload_length);
                return iscsit_dump_data_payload(cmd->conn, payload_length, 1);
        default:
                return DATAOUT_CANNOT_RECOVER;
        }

        return DATAOUT_NORMAL;
}

static int iscsit_dataout_update_r2t(struct iscsi_cmd *cmd, u32 offset, u32 length)
{
        struct iscsi_r2t *r2t;

        if (cmd->unsolicited_data)
                return 0;

        r2t = iscsit_get_r2t_for_eos(cmd, offset, length);
        if (!r2t)
                return -1;

        spin_lock_bh(&cmd->r2t_lock);
        r2t->seq_complete = 1;
        cmd->outstanding_r2ts--;
        spin_unlock_bh(&cmd->r2t_lock);

        return 0;
}

static int iscsit_dataout_update_datapduinorder_no(
        struct iscsi_cmd *cmd,
        u32 data_sn,
        int f_bit)
{
        int ret = 0;
        struct iscsi_pdu *pdu = cmd->pdu_ptr;

        pdu->data_sn = data_sn;

        switch (pdu->status) {
        case ISCSI_PDU_NOT_RECEIVED:
                pdu->status = ISCSI_PDU_RECEIVED_OK;
                break;
        case ISCSI_PDU_CRC_FAILED:
                pdu->status = ISCSI_PDU_RECEIVED_OK;
                break;
        case ISCSI_PDU_TIMED_OUT:
                pdu->status = ISCSI_PDU_RECEIVED_OK;
                break;
        default:
                return DATAOUT_CANNOT_RECOVER;
        }

        if (f_bit) {
                ret = iscsit_dataout_datapduinorder_no_fbit(cmd, pdu);
                if (ret == DATAOUT_CANNOT_RECOVER)
                        return ret;
        }

        return DATAOUT_NORMAL;
}

static int iscsit_dataout_post_crc_passed(
        struct iscsi_cmd *cmd,
        unsigned char *buf)
{
        int ret, send_r2t = 0;
        struct iscsi_conn *conn = cmd->conn;
        struct iscsi_seq *seq = NULL;
        struct iscsi_data *hdr = (struct iscsi_data *) buf;
        u32 payload_length = ntoh24(hdr->dlength);

        if (cmd->unsolicited_data) {
                if ((cmd->first_burst_len + payload_length) ==
                     conn->sess->sess_ops->FirstBurstLength) {
                        if (iscsit_dataout_update_r2t(cmd, hdr->offset,
                                        payload_length) < 0)
                                return DATAOUT_CANNOT_RECOVER;
                        send_r2t = 1;
                }

                if (!conn->sess->sess_ops->DataPDUInOrder) {
                        ret = iscsit_dataout_update_datapduinorder_no(cmd,
                                hdr->datasn, (hdr->flags & ISCSI_FLAG_CMD_FINAL));
                        if (ret == DATAOUT_CANNOT_RECOVER)
                                return ret;
                }

                cmd->first_burst_len += payload_length;

                if (conn->sess->sess_ops->DataSequenceInOrder)
                        cmd->data_sn++;
                else {
                        seq = cmd->seq_ptr;
                        seq->data_sn++;
                        seq->offset += payload_length;
                }

                if (send_r2t) {
                        if (seq)
                                seq->status = DATAOUT_SEQUENCE_COMPLETE;
                        cmd->first_burst_len = 0;
                        cmd->unsolicited_data = 0;
                }
        } else {
                if (conn->sess->sess_ops->DataSequenceInOrder) {
                        if ((cmd->next_burst_len + payload_length) ==
                             conn->sess->sess_ops->MaxBurstLength) {
                                if (iscsit_dataout_update_r2t(cmd, hdr->offset,
                                                payload_length) < 0)
                                        return DATAOUT_CANNOT_RECOVER;
                                send_r2t = 1;
                        }

                        if (!conn->sess->sess_ops->DataPDUInOrder) {
                                ret = iscsit_dataout_update_datapduinorder_no(
                                                cmd, hdr->datasn,
                                                (hdr->flags & ISCSI_FLAG_CMD_FINAL));
                                if (ret == DATAOUT_CANNOT_RECOVER)
                                        return ret;
                        }

                        cmd->next_burst_len += payload_length;
                        cmd->data_sn++;

                        if (send_r2t)
                                cmd->next_burst_len = 0;
                } else {
                        seq = cmd->seq_ptr;

                        if ((seq->next_burst_len + payload_length) ==
                             seq->xfer_len) {
                                if (iscsit_dataout_update_r2t(cmd, hdr->offset,
                                                payload_length) < 0)
                                        return DATAOUT_CANNOT_RECOVER;
                                send_r2t = 1;
                        }

                        if (!conn->sess->sess_ops->DataPDUInOrder) {
                                ret = iscsit_dataout_update_datapduinorder_no(
                                                cmd, hdr->datasn,
                                                (hdr->flags & ISCSI_FLAG_CMD_FINAL));
                                if (ret == DATAOUT_CANNOT_RECOVER)
                                        return ret;
                        }

                        seq->data_sn++;
                        seq->offset += payload_length;
                        seq->next_burst_len += payload_length;

                        if (send_r2t) {
                                seq->next_burst_len = 0;
                                seq->status = DATAOUT_SEQUENCE_COMPLETE;
                        }
                }
        }

        if (send_r2t && conn->sess->sess_ops->DataSequenceInOrder)
                cmd->data_sn = 0;

        cmd->write_data_done += payload_length;

        return (cmd->write_data_done == cmd->data_length) ?
                DATAOUT_SEND_TO_TRANSPORT : (send_r2t) ?
                DATAOUT_SEND_R2T : DATAOUT_NORMAL;
}

static int iscsit_dataout_post_crc_failed(
        struct iscsi_cmd *cmd,
        unsigned char *buf)
{
        struct iscsi_conn *conn = cmd->conn;
        struct iscsi_pdu *pdu;
        struct iscsi_data *hdr = (struct iscsi_data *) buf;
        u32 payload_length = ntoh24(hdr->dlength);

        if (conn->sess->sess_ops->DataPDUInOrder)
                goto recover;
        /*
         * The rest of this function is only called when DataPDUInOrder=No.
         */
        pdu = cmd->pdu_ptr;

        switch (pdu->status) {
        case ISCSI_PDU_NOT_RECEIVED:
                pdu->status = ISCSI_PDU_CRC_FAILED;
                break;
        case ISCSI_PDU_CRC_FAILED:
                break;
        case ISCSI_PDU_TIMED_OUT:
                pdu->status = ISCSI_PDU_CRC_FAILED;
                break;
        default:
                return DATAOUT_CANNOT_RECOVER;
        }

recover:
        return iscsit_recover_dataout_sequence(cmd, hdr->offset, payload_length);
}

/*
 *      Called from iscsit_handle_data_out() before DataOUT Payload is received
 *      and CRC computed.
 */
extern int iscsit_check_pre_dataout(
        struct iscsi_cmd *cmd,
        unsigned char *buf)
{
        int ret;
        struct iscsi_conn *conn = cmd->conn;

        ret = iscsit_dataout_within_command_recovery_check(cmd, buf);
        if ((ret == DATAOUT_WITHIN_COMMAND_RECOVERY) ||
            (ret == DATAOUT_CANNOT_RECOVER))
                return ret;

        ret = iscsit_dataout_check_datasn(cmd, buf);
        if ((ret == DATAOUT_WITHIN_COMMAND_RECOVERY) ||
            (ret == DATAOUT_CANNOT_RECOVER))
                return ret;

        if (cmd->unsolicited_data) {
                ret = iscsit_dataout_check_unsolicited_sequence(cmd, buf);
                if ((ret == DATAOUT_WITHIN_COMMAND_RECOVERY) ||
                    (ret == DATAOUT_CANNOT_RECOVER))
                        return ret;
        } else {
                ret = iscsit_dataout_check_sequence(cmd, buf);
                if ((ret == DATAOUT_WITHIN_COMMAND_RECOVERY) ||
                    (ret == DATAOUT_CANNOT_RECOVER))
                        return ret;
        }

        return (conn->sess->sess_ops->DataPDUInOrder) ?
                iscsit_dataout_pre_datapduinorder_yes(cmd, buf) :
                iscsit_dataout_pre_datapduinorder_no(cmd, buf);
}

/*
 *      Called from iscsit_handle_data_out() after DataOUT Payload is received
 *      and CRC computed.
 */
int iscsit_check_post_dataout(
        struct iscsi_cmd *cmd,
        unsigned char *buf,
        u8 data_crc_failed)
{
        struct iscsi_conn *conn = cmd->conn;

        cmd->dataout_timeout_retries = 0;

        if (!data_crc_failed)
                return iscsit_dataout_post_crc_passed(cmd, buf);
        else {
                if (!conn->sess->sess_ops->ErrorRecoveryLevel) {
                        pr_err("Unable to recover from DataOUT CRC"
                                " failure while ERL=0, closing session.\n");
                        iscsit_add_reject_from_cmd(ISCSI_REASON_DATA_DIGEST_ERROR,
                                        1, 0, buf, cmd);
                        return DATAOUT_CANNOT_RECOVER;
                }

                iscsit_add_reject_from_cmd(ISCSI_REASON_DATA_DIGEST_ERROR,
                                0, 0, buf, cmd);
                return iscsit_dataout_post_crc_failed(cmd, buf);
        }
}

static void iscsit_handle_time2retain_timeout(unsigned long data)
{
        struct iscsi_session *sess = (struct iscsi_session *) data;
        struct iscsi_portal_group *tpg = ISCSI_TPG_S(sess);
        struct se_portal_group *se_tpg = &tpg->tpg_se_tpg;

        spin_lock_bh(&se_tpg->session_lock);
        if (sess->time2retain_timer_flags & ISCSI_TF_STOP) {
                spin_unlock_bh(&se_tpg->session_lock);
                return;
        }
        if (atomic_read(&sess->session_reinstatement)) {
                pr_err("Exiting Time2Retain handler because"
                                " session_reinstatement=1\n");
                spin_unlock_bh(&se_tpg->session_lock);
                return;
        }
        sess->time2retain_timer_flags |= ISCSI_TF_EXPIRED;

        pr_err("Time2Retain timer expired for SID: %u, cleaning up"
                        " iSCSI session.\n", sess->sid);
        {
        struct iscsi_tiqn *tiqn = tpg->tpg_tiqn;

        if (tiqn) {
                spin_lock(&tiqn->sess_err_stats.lock);
                strcpy(tiqn->sess_err_stats.last_sess_fail_rem_name,
                        (void *)sess->sess_ops->InitiatorName);
                tiqn->sess_err_stats.last_sess_failure_type =
                                ISCSI_SESS_ERR_CXN_TIMEOUT;
                tiqn->sess_err_stats.cxn_timeout_errors++;
                sess->conn_timeout_errors++;
                spin_unlock(&tiqn->sess_err_stats.lock);
        }
        }

        spin_unlock_bh(&se_tpg->session_lock);
        iscsit_close_session(sess);
}

extern void iscsit_start_time2retain_handler(struct iscsi_session *sess)
{
        int tpg_active;
        /*
         * Only start Time2Retain timer when the assoicated TPG is still in
         * an ACTIVE (eg: not disabled or shutdown) state.
         */
        spin_lock(&ISCSI_TPG_S(sess)->tpg_state_lock);
        tpg_active = (ISCSI_TPG_S(sess)->tpg_state == TPG_STATE_ACTIVE);
        spin_unlock(&ISCSI_TPG_S(sess)->tpg_state_lock);

        if (!tpg_active)
                return;

        if (sess->time2retain_timer_flags & ISCSI_TF_RUNNING)
                return;

        pr_debug("Starting Time2Retain timer for %u seconds on"
                " SID: %u\n", sess->sess_ops->DefaultTime2Retain, sess->sid);

        init_timer(&sess->time2retain_timer);
        sess->time2retain_timer.expires =
                (get_jiffies_64() + sess->sess_ops->DefaultTime2Retain * HZ);
        sess->time2retain_timer.data = (unsigned long)sess;
        sess->time2retain_timer.function = iscsit_handle_time2retain_timeout;
        sess->time2retain_timer_flags &= ~ISCSI_TF_STOP;
        sess->time2retain_timer_flags |= ISCSI_TF_RUNNING;
        add_timer(&sess->time2retain_timer);
}

/*
 *      Called with spin_lock_bh(&struct se_portal_group->session_lock) held
 */
extern int iscsit_stop_time2retain_timer(struct iscsi_session *sess)
{
        struct iscsi_portal_group *tpg = ISCSI_TPG_S(sess);
        struct se_portal_group *se_tpg = &tpg->tpg_se_tpg;

        if (sess->time2retain_timer_flags & ISCSI_TF_EXPIRED)
                return -1;

        if (!(sess->time2retain_timer_flags & ISCSI_TF_RUNNING))
                return 0;

        sess->time2retain_timer_flags |= ISCSI_TF_STOP;
        spin_unlock_bh(&se_tpg->session_lock);

        del_timer_sync(&sess->time2retain_timer);

        spin_lock_bh(&se_tpg->session_lock);
        sess->time2retain_timer_flags &= ~ISCSI_TF_RUNNING;
        pr_debug("Stopped Time2Retain Timer for SID: %u\n",
                        sess->sid);
        return 0;
}

void iscsit_connection_reinstatement_rcfr(struct iscsi_conn *conn)
{
        spin_lock_bh(&conn->state_lock);
        if (atomic_read(&conn->connection_exit)) {
                spin_unlock_bh(&conn->state_lock);
                goto sleep;
        }

        if (atomic_read(&conn->transport_failed)) {
                spin_unlock_bh(&conn->state_lock);
                goto sleep;
        }
        spin_unlock_bh(&conn->state_lock);

        iscsi_thread_set_force_reinstatement(conn);

sleep:
        wait_for_completion(&conn->conn_wait_rcfr_comp);
        complete(&conn->conn_post_wait_comp);
}

void iscsit_cause_connection_reinstatement(struct iscsi_conn *conn, int sleep)
{
        spin_lock_bh(&conn->state_lock);
        if (atomic_read(&conn->connection_exit)) {
                spin_unlock_bh(&conn->state_lock);
                return;
        }

        if (atomic_read(&conn->transport_failed)) {
                spin_unlock_bh(&conn->state_lock);
                return;
        }

        if (atomic_read(&conn->connection_reinstatement)) {
                spin_unlock_bh(&conn->state_lock);
                return;
        }

        if (iscsi_thread_set_force_reinstatement(conn) < 0) {
                spin_unlock_bh(&conn->state_lock);
                return;
        }

        atomic_set(&conn->connection_reinstatement, 1);
        if (!sleep) {
                spin_unlock_bh(&conn->state_lock);
                return;
        }

        atomic_set(&conn->sleep_on_conn_wait_comp, 1);
        spin_unlock_bh(&conn->state_lock);

        wait_for_completion(&conn->conn_wait_comp);
        complete(&conn->conn_post_wait_comp);
}

void iscsit_fall_back_to_erl0(struct iscsi_session *sess)
{
        pr_debug("Falling back to ErrorRecoveryLevel=0 for SID:"
                        " %u\n", sess->sid);

        atomic_set(&sess->session_fall_back_to_erl0, 1);
}

static void iscsit_handle_connection_cleanup(struct iscsi_conn *conn)
{
        struct iscsi_session *sess = conn->sess;

        if ((sess->sess_ops->ErrorRecoveryLevel == 2) &&
            !atomic_read(&sess->session_reinstatement) &&
            !atomic_read(&sess->session_fall_back_to_erl0))
                iscsit_connection_recovery_transport_reset(conn);
        else {
                pr_debug("Performing cleanup for failed iSCSI"
                        " Connection ID: %hu from %s\n", conn->cid,
                        sess->sess_ops->InitiatorName);
                iscsit_close_connection(conn);
        }
}

extern void iscsit_take_action_for_connection_exit(struct iscsi_conn *conn)
{
        spin_lock_bh(&conn->state_lock);
        if (atomic_read(&conn->connection_exit)) {
                spin_unlock_bh(&conn->state_lock);
                return;
        }
        atomic_set(&conn->connection_exit, 1);

        if (conn->conn_state == TARG_CONN_STATE_IN_LOGOUT) {
                spin_unlock_bh(&conn->state_lock);
                iscsit_close_connection(conn);
                return;
        }

        if (conn->conn_state == TARG_CONN_STATE_CLEANUP_WAIT) {
                spin_unlock_bh(&conn->state_lock);
                return;
        }

        pr_debug("Moving to TARG_CONN_STATE_CLEANUP_WAIT.\n");
        conn->conn_state = TARG_CONN_STATE_CLEANUP_WAIT;
        spin_unlock_bh(&conn->state_lock);

        iscsit_handle_connection_cleanup(conn);
}

/*
 *      This is the simple function that makes the magic of
 *      sync and steering happen in the follow paradoxical order:
 *
 *      0) Receive conn->of_marker (bytes left until next OFMarker)
 *         bytes into an offload buffer.  When we pass the exact number
 *         of bytes in conn->of_marker, iscsit_dump_data_payload() and hence
 *         rx_data() will automatically receive the identical u32 marker
 *         values and store it in conn->of_marker_offset;
 *      1) Now conn->of_marker_offset will contain the offset to the start
 *         of the next iSCSI PDU.  Dump these remaining bytes into another
 *         offload buffer.
 *      2) We are done!
 *         Next byte in the TCP stream will contain the next iSCSI PDU!
 *         Cool Huh?!
 */
int iscsit_recover_from_unknown_opcode(struct iscsi_conn *conn)
{
        /*
         * Make sure the remaining bytes to next maker is a sane value.
         */
        if (conn->of_marker > (conn->conn_ops->OFMarkInt * 4)) {
                pr_err("Remaining bytes to OFMarker: %u exceeds"
                        " OFMarkInt bytes: %u.\n", conn->of_marker,
                                conn->conn_ops->OFMarkInt * 4);
                return -1;
        }

        pr_debug("Advancing %u bytes in TCP stream to get to the"
                        " next OFMarker.\n", conn->of_marker);

        if (iscsit_dump_data_payload(conn, conn->of_marker, 0) < 0)
                return -1;

        /*
         * Make sure the offset marker we retrived is a valid value.
         */
        if (conn->of_marker_offset > (ISCSI_HDR_LEN + (ISCSI_CRC_LEN * 2) +
            conn->conn_ops->MaxRecvDataSegmentLength)) {
                pr_err("OfMarker offset value: %u exceeds limit.\n",
                        conn->of_marker_offset);
                return -1;
        }

        pr_debug("Discarding %u bytes of TCP stream to get to the"
                        " next iSCSI Opcode.\n", conn->of_marker_offset);

        if (iscsit_dump_data_payload(conn, conn->of_marker_offset, 0) < 0)

                return -1;

        return 0;
}