linux/arch/powerpc/platforms/83xx/misc.c
<<
>>
Prefs
   1/*
   2 * misc setup functions for MPC83xx
   3 *
   4 * Maintainer: Kumar Gala <galak@kernel.crashing.org>
   5 *
   6 * This program is free software; you can redistribute  it and/or modify it
   7 * under  the terms of  the GNU General  Public License as published by the
   8 * Free Software Foundation;  either version 2 of the  License, or (at your
   9 * option) any later version.
  10 */
  11
  12#include <linux/stddef.h>
  13#include <linux/kernel.h>
  14#include <linux/of_platform.h>
  15#include <linux/pci.h>
  16
  17#include <asm/io.h>
  18#include <asm/hw_irq.h>
  19#include <asm/ipic.h>
  20#include <asm/qe_ic.h>
  21#include <sysdev/fsl_soc.h>
  22#include <sysdev/fsl_pci.h>
  23
  24#include "mpc83xx.h"
  25
  26static __be32 __iomem *restart_reg_base;
  27
  28static int __init mpc83xx_restart_init(void)
  29{
  30        /* map reset restart_reg_baseister space */
  31        restart_reg_base = ioremap(get_immrbase() + 0x900, 0xff);
  32
  33        return 0;
  34}
  35
  36arch_initcall(mpc83xx_restart_init);
  37
  38void mpc83xx_restart(char *cmd)
  39{
  40#define RST_OFFSET      0x00000900
  41#define RST_PROT_REG    0x00000018
  42#define RST_CTRL_REG    0x0000001c
  43
  44        local_irq_disable();
  45
  46        if (restart_reg_base) {
  47                /* enable software reset "RSTE" */
  48                out_be32(restart_reg_base + (RST_PROT_REG >> 2), 0x52535445);
  49
  50                /* set software hard reset */
  51                out_be32(restart_reg_base + (RST_CTRL_REG >> 2), 0x2);
  52        } else {
  53                printk (KERN_EMERG "Error: Restart registers not mapped, spinning!\n");
  54        }
  55
  56        for (;;) ;
  57}
  58
  59long __init mpc83xx_time_init(void)
  60{
  61#define SPCR_OFFSET     0x00000110
  62#define SPCR_TBEN       0x00400000
  63        __be32 __iomem *spcr = ioremap(get_immrbase() + SPCR_OFFSET, 4);
  64        __be32 tmp;
  65
  66        tmp = in_be32(spcr);
  67        out_be32(spcr, tmp | SPCR_TBEN);
  68
  69        iounmap(spcr);
  70
  71        return 0;
  72}
  73
  74void __init mpc83xx_ipic_init_IRQ(void)
  75{
  76        struct device_node *np;
  77
  78        /* looking for fsl,pq2pro-pic which is asl compatible with fsl,ipic */
  79        np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
  80        if (!np)
  81                np = of_find_node_by_type(NULL, "ipic");
  82        if (!np)
  83                return;
  84
  85        ipic_init(np, 0);
  86
  87        of_node_put(np);
  88
  89        /* Initialize the default interrupt mapping priorities,
  90         * in case the boot rom changed something on us.
  91         */
  92        ipic_set_default_priority();
  93}
  94
  95#ifdef CONFIG_QUICC_ENGINE
  96void __init mpc83xx_qe_init_IRQ(void)
  97{
  98        struct device_node *np;
  99
 100        np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
 101        if (!np) {
 102                np = of_find_node_by_type(NULL, "qeic");
 103                if (!np)
 104                        return;
 105        }
 106        qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
 107        of_node_put(np);
 108}
 109
 110void __init mpc83xx_ipic_and_qe_init_IRQ(void)
 111{
 112        mpc83xx_ipic_init_IRQ();
 113        mpc83xx_qe_init_IRQ();
 114}
 115#endif /* CONFIG_QUICC_ENGINE */
 116
 117static struct of_device_id __initdata of_bus_ids[] = {
 118        { .type = "soc", },
 119        { .compatible = "soc", },
 120        { .compatible = "simple-bus" },
 121        { .compatible = "gianfar" },
 122        { .compatible = "gpio-leds", },
 123        { .type = "qe", },
 124        { .compatible = "fsl,qe", },
 125        {},
 126};
 127
 128int __init mpc83xx_declare_of_platform_devices(void)
 129{
 130        of_platform_bus_probe(NULL, of_bus_ids, NULL);
 131        return 0;
 132}
 133
 134#ifdef CONFIG_PCI
 135void __init mpc83xx_setup_pci(void)
 136{
 137        struct device_node *np;
 138
 139        for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
 140                mpc83xx_add_bridge(np);
 141        for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
 142                mpc83xx_add_bridge(np);
 143}
 144#endif
 145