LXR linux/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt

   1PXA3xx NAND DT bindings
   2
   3Required properties:
   4
   5 - compatible:          Should be "marvell,pxa3xx-nand"
   6 - reg:                 The register base for the controller
   7 - interrupts:          The interrupt to map
   8 - #address-cells:      Set to <1> if the node includes partitions
   9
  10Optional properties:
  11
  12 - marvell,nand-enable-arbiter: Set to enable the bus arbiter
  13 - marvell,nand-keep-config:    Set to keep the NAND controller config as set
  14                                by the bootloader
  15 - num-cs:                      Number of chipselect lines to usw
  16
  17Example:
  18
  19        nand0: nand@43100000 {
  20                compatible = "marvell,pxa3xx-nand";
  21                reg = <0x43100000 90>;
  22                interrupts = <45>;
  23                #address-cells = <1>;
  24
  25                marvell,nand-enable-arbiter;
  26                marvell,nand-keep-config;
  27                num-cs = <1>;
  28
  29                /* partitions (optional) */
  30        };
  31
  32