linux/arch/m68knommu/platform/5206e/config.c
<<
>>
Prefs
   1/***************************************************************************/
   2
   3/*
   4 *      linux/arch/m68knommu/platform/5206e/config.c
   5 *
   6 *      Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
   7 */
   8
   9/***************************************************************************/
  10
  11#include <linux/kernel.h>
  12#include <linux/param.h>
  13#include <linux/init.h>
  14#include <linux/io.h>
  15#include <asm/machdep.h>
  16#include <asm/coldfire.h>
  17#include <asm/mcfsim.h>
  18#include <asm/mcfuart.h>
  19#include <asm/mcfdma.h>
  20
  21/***************************************************************************/
  22
  23static struct mcf_platform_uart m5206e_uart_platform[] = {
  24        {
  25                .mapbase        = MCF_MBAR + MCFUART_BASE1,
  26                .irq            = 73,
  27        },
  28        {
  29                .mapbase        = MCF_MBAR + MCFUART_BASE2,
  30                .irq            = 74,
  31        },
  32        { },
  33};
  34
  35static struct platform_device m5206e_uart = {
  36        .name                   = "mcfuart",
  37        .id                     = 0,
  38        .dev.platform_data      = m5206e_uart_platform,
  39};
  40
  41static struct platform_device *m5206e_devices[] __initdata = {
  42        &m5206e_uart,
  43};
  44
  45/***************************************************************************/
  46
  47static void __init m5206e_uart_init_line(int line, int irq)
  48{
  49        if (line == 0) {
  50                writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
  51                writeb(irq, MCFUART_BASE1 + MCFUART_UIVR);
  52                mcf_mapirq2imr(irq, MCFINTC_UART0);
  53        } else if (line == 1) {
  54                writel(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
  55                writeb(irq, MCFUART_BASE2 + MCFUART_UIVR);
  56                mcf_mapirq2imr(irq, MCFINTC_UART1);
  57        }
  58}
  59
  60static void __init m5206e_uarts_init(void)
  61{
  62        const int nrlines = ARRAY_SIZE(m5206e_uart_platform);
  63        int line;
  64
  65        for (line = 0; (line < nrlines); line++)
  66                m5206e_uart_init_line(line, m5206e_uart_platform[line].irq);
  67}
  68
  69/***************************************************************************/
  70
  71static void __init m5206e_timers_init(void)
  72{
  73        /* Timer1 is always used as system timer */
  74        writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3,
  75                MCF_MBAR + MCFSIM_TIMER1ICR);
  76        mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1);
  77
  78#ifdef CONFIG_HIGHPROFILE
  79        /* Timer2 is to be used as a high speed profile timer  */
  80        writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3,
  81                MCF_MBAR + MCFSIM_TIMER2ICR);
  82        mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2);
  83#endif
  84}
  85
  86/***************************************************************************/
  87
  88void m5206e_cpu_reset(void)
  89{
  90        local_irq_disable();
  91        /* Set watchdog to soft reset, and enabled */
  92        __raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR);
  93        for (;;)
  94                /* wait for watchdog to timeout */;
  95}
  96
  97/***************************************************************************/
  98
  99void __init config_BSP(char *commandp, int size)
 100{
 101#if defined(CONFIG_NETtel)
 102        /* Copy command line from FLASH to local buffer... */
 103        memcpy(commandp, (char *) 0xf0004000, size);
 104        commandp[size-1] = 0;
 105#endif /* CONFIG_NETtel */
 106
 107        mach_reset = m5206e_cpu_reset;
 108        m5206e_timers_init();
 109        m5206e_uarts_init();
 110
 111        /* Only support the external interrupts on their primary level */
 112        mcf_mapirq2imr(25, MCFINTC_EINT1);
 113        mcf_mapirq2imr(28, MCFINTC_EINT4);
 114        mcf_mapirq2imr(31, MCFINTC_EINT7);
 115}
 116
 117/***************************************************************************/
 118
 119static int __init init_BSP(void)
 120{
 121        platform_add_devices(m5206e_devices, ARRAY_SIZE(m5206e_devices));
 122        return 0;
 123}
 124
 125arch_initcall(init_BSP);
 126
 127/***************************************************************************/
 128