linux/drivers/scsi/eata_pio.c
<<
>>
Prefs
   1/************************************************************
   2 *                                                          *
   3 *               Linux EATA SCSI PIO driver                 *
   4 *                                                          *
   5 *  based on the CAM document CAM/89-004 rev. 2.0c,         *
   6 *  DPT's driver kit, some internal documents and source,   *
   7 *  and several other Linux scsi drivers and kernel docs.   *
   8 *                                                          *
   9 *  The driver currently:                                   *
  10 *      -supports all EATA-PIO boards                       *
  11 *      -only supports DASD devices                         *
  12 *                                                          *
  13 *  (c)1993-96 Michael Neuffer, Alfred Arnold               *
  14 *             neuffer@goofy.zdv.uni-mainz.de               *
  15 *             a.arnold@kfa-juelich.de                      * 
  16 *                                                          *
  17 *  Updated 2002 by Alan Cox <alan@lxorguk.ukuu.org.uk> for *
  18 *   Linux 2.5.x and the newer locking and error handling   *
  19 *                                                          *
  20 *  This program is free software; you can redistribute it  *
  21 *  and/or modify it under the terms of the GNU General     *
  22 *  Public License as published by the Free Software        *
  23 *  Foundation; either version 2 of the License, or         *
  24 *  (at your option) any later version.                     *
  25 *                                                          *
  26 *  This program is distributed in the hope that it will be *
  27 *  useful, but WITHOUT ANY WARRANTY; without even the      *
  28 *  implied warranty of MERCHANTABILITY or FITNESS FOR A    *
  29 *  PARTICULAR PURPOSE.  See the GNU General Public License *
  30 *  for more details.                                       *
  31 *                                                          *
  32 *  You should have received a copy of the GNU General      *
  33 *  Public License along with this kernel; if not, write to *
  34 *  the Free Software Foundation, Inc., 675 Mass Ave,       *
  35 *  Cambridge, MA 02139, USA.                               *
  36 *                                                          *
  37 *  For the avoidance of doubt the "preferred form" of this *
  38 *  code is one which is in an open non patent encumbered   *
  39 *  format. Where cryptographic key signing forms part of   *
  40 *  the process of creating an executable the information   *
  41 *  including keys needed to generate an equivalently       *
  42 *  functional executable are deemed to be part of the      *
  43 *  source code are deemed to be part of the source code.   *
  44 *                                                          *
  45 ************************************************************
  46 *  last change: 2002/11/02               OS: Linux 2.5.45  *
  47 ************************************************************/
  48
  49#include <linux/module.h>
  50#include <linux/kernel.h>
  51#include <linux/string.h>
  52#include <linux/ioport.h>
  53#include <linux/slab.h>
  54#include <linux/in.h>
  55#include <linux/pci.h>
  56#include <linux/proc_fs.h>
  57#include <linux/interrupt.h>
  58#include <linux/blkdev.h>
  59#include <linux/spinlock.h>
  60#include <linux/delay.h>
  61
  62#include <asm/io.h>
  63
  64#include <scsi/scsi.h>
  65#include <scsi/scsi_cmnd.h>
  66#include <scsi/scsi_device.h>
  67#include <scsi/scsi_host.h>
  68
  69#include "eata_generic.h"
  70#include "eata_pio.h"
  71
  72
  73static unsigned int ISAbases[MAXISA] =  {
  74         0x1F0, 0x170, 0x330, 0x230
  75};
  76
  77static unsigned int ISAirqs[MAXISA] = {
  78        14, 12, 15, 11
  79};
  80
  81static unsigned char EISAbases[] = { 
  82        1, 1, 1, 1, 1, 1, 1, 1,
  83        1, 1, 1, 1, 1, 1, 1, 1 
  84};
  85
  86static unsigned int registered_HBAs;
  87static struct Scsi_Host *last_HBA;
  88static struct Scsi_Host *first_HBA;
  89static unsigned char reg_IRQ[16];
  90static unsigned char reg_IRQL[16];
  91static unsigned long int_counter;
  92static unsigned long queue_counter;
  93
  94static struct scsi_host_template driver_template;
  95
  96/*
  97 * eata_proc_info
  98 * inout : decides on the direction of the dataflow and the meaning of the 
  99 *         variables
 100 * buffer: If inout==FALSE data is being written to it else read from it
 101 * *start: If inout==FALSE start of the valid data in the buffer
 102 * offset: If inout==FALSE offset from the beginning of the imaginary file 
 103 *         from which we start writing into the buffer
 104 * length: If inout==FALSE max number of bytes to be written into the buffer 
 105 *         else number of bytes in the buffer
 106 */
 107static int eata_pio_proc_info(struct Scsi_Host *shost, char *buffer, char **start, off_t offset,
 108                              int length, int rw)
 109{
 110        int len = 0;
 111        off_t begin = 0, pos = 0;
 112
 113        if (rw)
 114                return -ENOSYS;
 115
 116        len += sprintf(buffer+len, "EATA (Extended Attachment) PIO driver version: "
 117                   "%d.%d%s\n",VER_MAJOR, VER_MINOR, VER_SUB);
 118        len += sprintf(buffer + len, "queued commands:     %10ld\n"
 119                   "processed interrupts:%10ld\n", queue_counter, int_counter);
 120        len += sprintf(buffer + len, "\nscsi%-2d: HBA %.10s\n",
 121                   shost->host_no, SD(shost)->name);
 122        len += sprintf(buffer + len, "Firmware revision: v%s\n",
 123                   SD(shost)->revision);
 124        len += sprintf(buffer + len, "IO: PIO\n");
 125        len += sprintf(buffer + len, "Base IO : %#.4x\n", (u32) shost->base);
 126        len += sprintf(buffer + len, "Host Bus: %s\n",
 127                   (SD(shost)->bustype == 'P')?"PCI ":
 128                   (SD(shost)->bustype == 'E')?"EISA":"ISA ");
 129    
 130        pos = begin + len;
 131    
 132        if (pos < offset) {
 133                len = 0;
 134                begin = pos;
 135        }
 136        if (pos > offset + length)
 137                goto stop_output;
 138    
 139stop_output:
 140        DBG(DBG_PROC, printk("2pos: %ld offset: %ld len: %d\n", pos, offset, len));
 141        *start = buffer + (offset - begin);   /* Start of wanted data */
 142        len -= (offset - begin);            /* Start slop */
 143        if (len > length)
 144                len = length;               /* Ending slop */
 145        DBG(DBG_PROC, printk("3pos: %ld offset: %ld len: %d\n", pos, offset, len));
 146    
 147        return len;
 148}
 149
 150static int eata_pio_release(struct Scsi_Host *sh)
 151{
 152        hostdata *hd = SD(sh);
 153        if (sh->irq && reg_IRQ[sh->irq] == 1)
 154                free_irq(sh->irq, NULL);
 155        else
 156                reg_IRQ[sh->irq]--;
 157        if (SD(sh)->channel == 0) {
 158                if (sh->io_port && sh->n_io_port)
 159                        release_region(sh->io_port, sh->n_io_port);
 160        }
 161        /* At this point the PCI reference can go */
 162        if (hd->pdev)
 163                pci_dev_put(hd->pdev);
 164        return 1;
 165}
 166
 167static void IncStat(struct scsi_pointer *SCp, unsigned int Increment)
 168{
 169        SCp->ptr += Increment;
 170        if ((SCp->this_residual -= Increment) == 0) {
 171                if ((--SCp->buffers_residual) == 0)
 172                        SCp->Status = 0;
 173                else {
 174                        SCp->buffer++;
 175                        SCp->ptr = sg_virt(SCp->buffer);
 176                        SCp->this_residual = SCp->buffer->length;
 177                }
 178        }
 179}
 180
 181static irqreturn_t eata_pio_int_handler(int irq, void *dev_id);
 182
 183static irqreturn_t do_eata_pio_int_handler(int irq, void *dev_id)
 184{
 185        unsigned long flags;
 186        struct Scsi_Host *dev = dev_id;
 187        irqreturn_t ret;
 188
 189        spin_lock_irqsave(dev->host_lock, flags);
 190        ret = eata_pio_int_handler(irq, dev_id);
 191        spin_unlock_irqrestore(dev->host_lock, flags);
 192        return ret;
 193}
 194
 195static irqreturn_t eata_pio_int_handler(int irq, void *dev_id)
 196{
 197        unsigned int eata_stat = 0xfffff;
 198        struct scsi_cmnd *cmd;
 199        hostdata *hd;
 200        struct eata_ccb *cp;
 201        unsigned long base;
 202        unsigned int x, z;
 203        struct Scsi_Host *sh;
 204        unsigned short zwickel = 0;
 205        unsigned char stat, odd;
 206        irqreturn_t ret = IRQ_NONE;
 207
 208        for (x = 1, sh = first_HBA; x <= registered_HBAs; x++, sh = SD(sh)->prev) 
 209        {
 210                if (sh->irq != irq)
 211                        continue;
 212                if (inb(sh->base + HA_RSTATUS) & HA_SBUSY)
 213                        continue;
 214
 215                int_counter++;
 216                ret = IRQ_HANDLED;
 217
 218                hd = SD(sh);
 219
 220                cp = &hd->ccb[0];
 221                cmd = cp->cmd;
 222                base = cmd->device->host->base;
 223
 224                do {
 225                        stat = inb(base + HA_RSTATUS);
 226                        if (stat & HA_SDRQ) {
 227                                if (cp->DataIn) {
 228                                        z = 256;
 229                                        odd = 0;
 230                                        while ((cmd->SCp.Status) && ((z > 0) || (odd))) {
 231                                                if (odd) {
 232                                                        *(cmd->SCp.ptr) = zwickel >> 8;
 233                                                        IncStat(&cmd->SCp, 1);
 234                                                        odd = 0;
 235                                                }
 236                                                x = min_t(unsigned int, z, cmd->SCp.this_residual / 2);
 237                                                insw(base + HA_RDATA, cmd->SCp.ptr, x);
 238                                                z -= x;
 239                                                IncStat(&cmd->SCp, 2 * x);
 240                                                if ((z > 0) && (cmd->SCp.this_residual == 1)) {
 241                                                        zwickel = inw(base + HA_RDATA);
 242                                                        *(cmd->SCp.ptr) = zwickel & 0xff;
 243                                                        IncStat(&cmd->SCp, 1);
 244                                                        z--;
 245                                                        odd = 1;
 246                                                }
 247                                        }
 248                                        while (z > 0) {
 249                                                zwickel = inw(base + HA_RDATA);
 250                                                z--;
 251                                        }
 252                                } else {        /* cp->DataOut */
 253
 254                                        odd = 0;
 255                                        z = 256;
 256                                        while ((cmd->SCp.Status) && ((z > 0) || (odd))) {
 257                                                if (odd) {
 258                                                        zwickel += *(cmd->SCp.ptr) << 8;
 259                                                        IncStat(&cmd->SCp, 1);
 260                                                        outw(zwickel, base + HA_RDATA);
 261                                                        z--;
 262                                                        odd = 0;
 263                                                }
 264                                                x = min_t(unsigned int, z, cmd->SCp.this_residual / 2);
 265                                                outsw(base + HA_RDATA, cmd->SCp.ptr, x);
 266                                                z -= x;
 267                                                IncStat(&cmd->SCp, 2 * x);
 268                                                if ((z > 0) && (cmd->SCp.this_residual == 1)) {
 269                                                        zwickel = *(cmd->SCp.ptr);
 270                                                        zwickel &= 0xff;
 271                                                        IncStat(&cmd->SCp, 1);
 272                                                        odd = 1;
 273                                                }
 274                                        }
 275                                        while (z > 0 || odd) {
 276                                                outw(zwickel, base + HA_RDATA);
 277                                                z--;
 278                                                odd = 0;
 279                                        }
 280                                }
 281                        }
 282                }
 283                while ((stat & HA_SDRQ) || ((stat & HA_SMORE) && hd->moresupport));
 284
 285                /* terminate handler if HBA goes busy again, i.e. transfers
 286                 * more data */
 287
 288                if (stat & HA_SBUSY)
 289                        break;
 290
 291                /* OK, this is quite stupid, but I haven't found any correct
 292                 * way to get HBA&SCSI status so far */
 293
 294                if (!(inb(base + HA_RSTATUS) & HA_SERROR)) {
 295                        cmd->result = (DID_OK << 16);
 296                        hd->devflags |= (1 << cp->cp_id);
 297                } else if (hd->devflags & (1 << cp->cp_id))
 298                        cmd->result = (DID_OK << 16) + 0x02;
 299                else
 300                        cmd->result = (DID_NO_CONNECT << 16);
 301
 302                if (cp->status == LOCKED) {
 303                        cp->status = FREE;
 304                        eata_stat = inb(base + HA_RSTATUS);
 305                        printk(KERN_CRIT "eata_pio: int_handler, freeing locked " "queueslot\n");
 306                        return ret;
 307                }
 308#if DBG_INTR2
 309                if (stat != 0x50)
 310                        printk(KERN_DEBUG "stat: %#.2x, result: %#.8x\n", stat, cmd->result);
 311#endif
 312
 313                cp->status = FREE;      /* now we can release the slot  */
 314
 315                cmd->scsi_done(cmd);
 316        }
 317
 318        return ret;
 319}
 320
 321static inline unsigned int eata_pio_send_command(unsigned long base, unsigned char command)
 322{
 323        unsigned int loop = 50;
 324
 325        while (inb(base + HA_RSTATUS) & HA_SBUSY)
 326                if (--loop == 0)
 327                        return 1;
 328
 329        /* Enable interrupts for HBA.  It is not the best way to do it at this
 330         * place, but I hope that it doesn't interfere with the IDE driver 
 331         * initialization this way */
 332
 333        outb(HA_CTRL_8HEADS, base + HA_CTRLREG);
 334
 335        outb(command, base + HA_WCOMMAND);
 336        return 0;
 337}
 338
 339static int eata_pio_queue(struct scsi_cmnd *cmd,
 340                void (*done)(struct scsi_cmnd *))
 341{
 342        unsigned int x, y;
 343        unsigned long base;
 344
 345        hostdata *hd;
 346        struct Scsi_Host *sh;
 347        struct eata_ccb *cp;
 348
 349        queue_counter++;
 350
 351        hd = HD(cmd);
 352        sh = cmd->device->host;
 353        base = sh->base;
 354
 355        /* use only slot 0, as 2001 can handle only one cmd at a time */
 356
 357        y = x = 0;
 358
 359        if (hd->ccb[y].status != FREE) {
 360
 361                DBG(DBG_QUEUE, printk(KERN_EMERG "can_queue %d, x %d, y %d\n", sh->can_queue, x, y));
 362#if DEBUG_EATA
 363                panic(KERN_EMERG "eata_pio: run out of queue slots cmdno:%ld " "intrno: %ld\n", queue_counter, int_counter);
 364#else
 365                panic(KERN_EMERG "eata_pio: run out of queue slots....\n");
 366#endif
 367        }
 368
 369        cp = &hd->ccb[y];
 370
 371        memset(cp, 0, sizeof(struct eata_ccb));
 372
 373        cp->status = USED;      /* claim free slot */
 374
 375        DBG(DBG_QUEUE, scmd_printk(KERN_DEBUG, cmd,
 376                "eata_pio_queue pid %ld, y %d\n",
 377                cmd->serial_number, y));
 378
 379        cmd->scsi_done = (void *) done;
 380
 381        if (cmd->sc_data_direction == DMA_TO_DEVICE)
 382                cp->DataOut = 1;        /* Output mode */
 383        else
 384                cp->DataIn = 0; /* Input mode  */
 385
 386        cp->Interpret = (cmd->device->id == hd->hostid);
 387        cp->cp_datalen = cpu_to_be32(scsi_bufflen(cmd));
 388        cp->Auto_Req_Sen = 0;
 389        cp->cp_reqDMA = 0;
 390        cp->reqlen = 0;
 391
 392        cp->cp_id = cmd->device->id;
 393        cp->cp_lun = cmd->device->lun;
 394        cp->cp_dispri = 0;
 395        cp->cp_identify = 1;
 396        memcpy(cp->cp_cdb, cmd->cmnd, COMMAND_SIZE(*cmd->cmnd));
 397
 398        cp->cp_statDMA = 0;
 399
 400        cp->cp_viraddr = cp;
 401        cp->cmd = cmd;
 402        cmd->host_scribble = (char *) &hd->ccb[y];
 403
 404        if (!scsi_bufflen(cmd)) {
 405                cmd->SCp.buffers_residual = 1;
 406                cmd->SCp.ptr = NULL;
 407                cmd->SCp.this_residual = 0;
 408                cmd->SCp.buffer = NULL;
 409        } else {
 410                cmd->SCp.buffer = scsi_sglist(cmd);
 411                cmd->SCp.buffers_residual = scsi_sg_count(cmd);
 412                cmd->SCp.ptr = sg_virt(cmd->SCp.buffer);
 413                cmd->SCp.this_residual = cmd->SCp.buffer->length;
 414        }
 415        cmd->SCp.Status = (cmd->SCp.this_residual != 0);        /* TRUE as long as bytes 
 416                                                                 * are to transfer */
 417
 418        if (eata_pio_send_command(base, EATA_CMD_PIO_SEND_CP)) {
 419                cmd->result = DID_BUS_BUSY << 16;
 420                scmd_printk(KERN_NOTICE, cmd,
 421                        "eata_pio_queue pid %ld, HBA busy, "
 422                        "returning DID_BUS_BUSY, done.\n", cmd->serial_number);
 423                done(cmd);
 424                cp->status = FREE;
 425                return 0;
 426        }
 427        /* FIXME: timeout */
 428        while (!(inb(base + HA_RSTATUS) & HA_SDRQ))
 429                cpu_relax();
 430        outsw(base + HA_RDATA, cp, hd->cplen);
 431        outb(EATA_CMD_PIO_TRUNC, base + HA_WCOMMAND);
 432        for (x = 0; x < hd->cppadlen; x++)
 433                outw(0, base + HA_RDATA);
 434
 435        DBG(DBG_QUEUE, scmd_printk(KERN_DEBUG, cmd,
 436                "Queued base %#.4lx pid: %ld "
 437                "slot %d irq %d\n", sh->base, cmd->serial_number, y, sh->irq));
 438
 439        return 0;
 440}
 441
 442static int eata_pio_abort(struct scsi_cmnd *cmd)
 443{
 444        unsigned int loop = 100;
 445
 446        DBG(DBG_ABNORM, scmd_printk(KERN_WARNING, cmd,
 447                "eata_pio_abort called pid: %ld\n",
 448                cmd->serial_number));
 449
 450        while (inb(cmd->device->host->base + HA_RAUXSTAT) & HA_ABUSY)
 451                if (--loop == 0) {
 452                        printk(KERN_WARNING "eata_pio: abort, timeout error.\n");
 453                        return FAILED;
 454                }
 455        if (CD(cmd)->status == FREE) {
 456                DBG(DBG_ABNORM, printk(KERN_WARNING "Returning: SCSI_ABORT_NOT_RUNNING\n"));
 457                return FAILED;
 458        }
 459        if (CD(cmd)->status == USED) {
 460                DBG(DBG_ABNORM, printk(KERN_WARNING "Returning: SCSI_ABORT_BUSY\n"));
 461                /* We want to sleep a bit more here */
 462                return FAILED;          /* SNOOZE */
 463        }
 464        if (CD(cmd)->status == RESET) {
 465                printk(KERN_WARNING "eata_pio: abort, command reset error.\n");
 466                return FAILED;
 467        }
 468        if (CD(cmd)->status == LOCKED) {
 469                DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio: abort, queue slot " "locked.\n"));
 470                return FAILED;
 471        }
 472        panic("eata_pio: abort: invalid slot status\n");
 473}
 474
 475static int eata_pio_host_reset(struct scsi_cmnd *cmd)
 476{
 477        unsigned int x, limit = 0;
 478        unsigned char success = 0;
 479        struct scsi_cmnd *sp;
 480        struct Scsi_Host *host = cmd->device->host;
 481
 482        DBG(DBG_ABNORM, scmd_printk(KERN_WARNING, cmd,
 483                "eata_pio_reset called pid:%ld\n",
 484                cmd->serial_number));
 485
 486        spin_lock_irq(host->host_lock);
 487
 488        if (HD(cmd)->state == RESET) {
 489                printk(KERN_WARNING "eata_pio_reset: exit, already in reset.\n");
 490                spin_unlock_irq(host->host_lock);
 491                return FAILED;
 492        }
 493
 494        /* force all slots to be free */
 495
 496        for (x = 0; x < cmd->device->host->can_queue; x++) {
 497
 498                if (HD(cmd)->ccb[x].status == FREE)
 499                        continue;
 500
 501                sp = HD(cmd)->ccb[x].cmd;
 502                HD(cmd)->ccb[x].status = RESET;
 503                printk(KERN_WARNING "eata_pio_reset: slot %d in reset, pid %ld.\n", x, sp->serial_number);
 504
 505                if (sp == NULL)
 506                        panic("eata_pio_reset: slot %d, sp==NULL.\n", x);
 507        }
 508
 509        /* hard reset the HBA  */
 510        outb(EATA_CMD_RESET, cmd->device->host->base + HA_WCOMMAND);
 511
 512        DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset: board reset done.\n"));
 513        HD(cmd)->state = RESET;
 514
 515        spin_unlock_irq(host->host_lock);
 516        msleep(3000);
 517        spin_lock_irq(host->host_lock);
 518
 519        DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset: interrupts disabled, " "loops %d.\n", limit));
 520
 521        for (x = 0; x < cmd->device->host->can_queue; x++) {
 522
 523                /* Skip slots already set free by interrupt */
 524                if (HD(cmd)->ccb[x].status != RESET)
 525                        continue;
 526
 527                sp = HD(cmd)->ccb[x].cmd;
 528                sp->result = DID_RESET << 16;
 529
 530                /* This mailbox is terminated */
 531                printk(KERN_WARNING "eata_pio_reset: reset ccb %d.\n", x);
 532                HD(cmd)->ccb[x].status = FREE;
 533
 534                sp->scsi_done(sp);
 535        }
 536
 537        HD(cmd)->state = 0;
 538
 539        spin_unlock_irq(host->host_lock);
 540
 541        if (success) {          /* hmmm... */
 542                DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset: exit, success.\n"));
 543                return SUCCESS;
 544        } else {
 545                DBG(DBG_ABNORM, printk(KERN_WARNING "eata_pio_reset: exit, wakeup.\n"));
 546                return FAILED;
 547        }
 548}
 549
 550static char *get_pio_board_data(unsigned long base, unsigned int irq, unsigned int id, unsigned long cplen, unsigned short cppadlen)
 551{
 552        struct eata_ccb cp;
 553        static char buff[256];
 554        int z;
 555
 556        memset(&cp, 0, sizeof(struct eata_ccb));
 557        memset(buff, 0, sizeof(buff));
 558
 559        cp.DataIn = 1;
 560        cp.Interpret = 1;       /* Interpret command */
 561
 562        cp.cp_datalen = cpu_to_be32(254);
 563        cp.cp_dataDMA = cpu_to_be32(0);
 564
 565        cp.cp_id = id;
 566        cp.cp_lun = 0;
 567
 568        cp.cp_cdb[0] = INQUIRY;
 569        cp.cp_cdb[1] = 0;
 570        cp.cp_cdb[2] = 0;
 571        cp.cp_cdb[3] = 0;
 572        cp.cp_cdb[4] = 254;
 573        cp.cp_cdb[5] = 0;
 574
 575        if (eata_pio_send_command(base, EATA_CMD_PIO_SEND_CP))
 576                return NULL;
 577
 578        while (!(inb(base + HA_RSTATUS) & HA_SDRQ))
 579                cpu_relax();
 580
 581        outsw(base + HA_RDATA, &cp, cplen);
 582        outb(EATA_CMD_PIO_TRUNC, base + HA_WCOMMAND);
 583        for (z = 0; z < cppadlen; z++)
 584                outw(0, base + HA_RDATA);
 585
 586        while (inb(base + HA_RSTATUS) & HA_SBUSY)
 587                cpu_relax();
 588
 589        if (inb(base + HA_RSTATUS) & HA_SERROR)
 590                return NULL;
 591        else if (!(inb(base + HA_RSTATUS) & HA_SDRQ))
 592                return NULL;
 593        else {
 594                insw(base + HA_RDATA, &buff, 127);
 595                while (inb(base + HA_RSTATUS) & HA_SDRQ)
 596                        inw(base + HA_RDATA);
 597                return buff;
 598        }
 599}
 600
 601static int get_pio_conf_PIO(unsigned long base, struct get_conf *buf)
 602{
 603        unsigned long loop = HZ / 2;
 604        int z;
 605        unsigned short *p;
 606
 607        if (!request_region(base, 9, "eata_pio"))
 608                return 0;
 609
 610        memset(buf, 0, sizeof(struct get_conf));
 611
 612        while (inb(base + HA_RSTATUS) & HA_SBUSY)
 613                if (--loop == 0)
 614                        goto fail;
 615
 616        DBG(DBG_PIO && DBG_PROBE, printk(KERN_DEBUG "Issuing PIO READ CONFIG to HBA at %#lx\n", base));
 617        eata_pio_send_command(base, EATA_CMD_PIO_READ_CONFIG);
 618
 619        loop = 50;
 620        for (p = (unsigned short *) buf; (long) p <= ((long) buf + (sizeof(struct get_conf) / 2)); p++) {
 621                while (!(inb(base + HA_RSTATUS) & HA_SDRQ))
 622                        if (--loop == 0)
 623                                goto fail;
 624
 625                loop = 50;
 626                *p = inw(base + HA_RDATA);
 627        }
 628        if (inb(base + HA_RSTATUS) & HA_SERROR) {
 629                DBG(DBG_PROBE, printk("eata_dma: get_conf_PIO, error during "
 630                                        "transfer for HBA at %lx\n", base));
 631                goto fail;
 632        }
 633
 634        if (cpu_to_be32(EATA_SIGNATURE) != buf->signature)
 635                goto fail;
 636
 637        DBG(DBG_PIO && DBG_PROBE, printk(KERN_NOTICE "EATA Controller found "
 638                                "at %#4lx EATA Level: %x\n",
 639                                base, (unsigned int) (buf->version)));
 640
 641        while (inb(base + HA_RSTATUS) & HA_SDRQ)
 642                inw(base + HA_RDATA);
 643
 644        if (!ALLOW_DMA_BOARDS) {
 645                for (z = 0; z < MAXISA; z++)
 646                        if (base == ISAbases[z]) {
 647                                buf->IRQ = ISAirqs[z];
 648                                break;
 649                        }
 650        }
 651
 652        return 1;
 653
 654 fail:
 655        release_region(base, 9);
 656        return 0;
 657}
 658
 659static void print_pio_config(struct get_conf *gc)
 660{
 661        printk("Please check values: (read config data)\n");
 662        printk("LEN: %d ver:%d OCS:%d TAR:%d TRNXFR:%d MORES:%d\n", be32_to_cpu(gc->len), gc->version, gc->OCS_enabled, gc->TAR_support, gc->TRNXFR, gc->MORE_support);
 663        printk("HAAV:%d SCSIID0:%d ID1:%d ID2:%d QUEUE:%d SG:%d SEC:%d\n", gc->HAA_valid, gc->scsi_id[3], gc->scsi_id[2], gc->scsi_id[1], be16_to_cpu(gc->queuesiz), be16_to_cpu(gc->SGsiz), gc->SECOND);
 664        printk("IRQ:%d IRQT:%d FORCADR:%d MCH:%d RIDQ:%d\n", gc->IRQ, gc->IRQ_TR, gc->FORCADR, gc->MAX_CHAN, gc->ID_qest);
 665}
 666
 667static unsigned int print_selftest(unsigned int base)
 668{
 669        unsigned char buffer[512];
 670#ifdef VERBOSE_SETUP
 671        int z;
 672#endif
 673
 674        printk("eata_pio: executing controller self test & setup...\n");
 675        while (inb(base + HA_RSTATUS) & HA_SBUSY);
 676        outb(EATA_CMD_PIO_SETUPTEST, base + HA_WCOMMAND);
 677        do {
 678                while (inb(base + HA_RSTATUS) & HA_SBUSY)
 679                        /* nothing */ ;
 680                if (inb(base + HA_RSTATUS) & HA_SDRQ) {
 681                        insw(base + HA_RDATA, &buffer, 256);
 682#ifdef VERBOSE_SETUP
 683                        /* no beeps please... */
 684                        for (z = 0; z < 511 && buffer[z]; z++)
 685                                if (buffer[z] != 7)
 686                                        printk("%c", buffer[z]);
 687#endif
 688                }
 689        } while (inb(base + HA_RSTATUS) & (HA_SBUSY | HA_SDRQ));
 690
 691        return (!(inb(base + HA_RSTATUS) & HA_SERROR));
 692}
 693
 694static int register_pio_HBA(long base, struct get_conf *gc, struct pci_dev *pdev)
 695{
 696        unsigned long size = 0;
 697        char *buff;
 698        unsigned long cplen;
 699        unsigned short cppadlen;
 700        struct Scsi_Host *sh;
 701        hostdata *hd;
 702
 703        DBG(DBG_REGISTER, print_pio_config(gc));
 704
 705        if (gc->DMA_support) {
 706                printk("HBA at %#.4lx supports DMA. Please use EATA-DMA driver.\n", base);
 707                if (!ALLOW_DMA_BOARDS)
 708                        return 0;
 709        }
 710
 711        if ((buff = get_pio_board_data(base, gc->IRQ, gc->scsi_id[3], cplen = (cpu_to_be32(gc->cplen) + 1) / 2, cppadlen = (cpu_to_be16(gc->cppadlen) + 1) / 2)) == NULL) {
 712                printk("HBA at %#lx didn't react on INQUIRY. Sorry.\n", base);
 713                return 0;
 714        }
 715
 716        if (!print_selftest(base) && !ALLOW_DMA_BOARDS) {
 717                printk("HBA at %#lx failed while performing self test & setup.\n", base);
 718                return 0;
 719        }
 720
 721        size = sizeof(hostdata) + (sizeof(struct eata_ccb) * be16_to_cpu(gc->queuesiz));
 722
 723        sh = scsi_register(&driver_template, size);
 724        if (sh == NULL)
 725                return 0;
 726
 727        if (!reg_IRQ[gc->IRQ]) {        /* Interrupt already registered ? */
 728                if (!request_irq(gc->IRQ, do_eata_pio_int_handler, IRQF_DISABLED, "EATA-PIO", sh)) {
 729                        reg_IRQ[gc->IRQ]++;
 730                        if (!gc->IRQ_TR)
 731                                reg_IRQL[gc->IRQ] = 1;  /* IRQ is edge triggered */
 732                } else {
 733                        printk("Couldn't allocate IRQ %d, Sorry.\n", gc->IRQ);
 734                        return 0;
 735                }
 736        } else {                /* More than one HBA on this IRQ */
 737                if (reg_IRQL[gc->IRQ]) {
 738                        printk("Can't support more than one HBA on this IRQ,\n" "  if the IRQ is edge triggered. Sorry.\n");
 739                        return 0;
 740                } else
 741                        reg_IRQ[gc->IRQ]++;
 742        }
 743
 744        hd = SD(sh);
 745
 746        memset(hd->ccb, 0, (sizeof(struct eata_ccb) * be16_to_cpu(gc->queuesiz)));
 747        memset(hd->reads, 0, sizeof(hd->reads));
 748
 749        strlcpy(SD(sh)->vendor, &buff[8], sizeof(SD(sh)->vendor));
 750        strlcpy(SD(sh)->name, &buff[16], sizeof(SD(sh)->name));
 751        SD(sh)->revision[0] = buff[32];
 752        SD(sh)->revision[1] = buff[33];
 753        SD(sh)->revision[2] = buff[34];
 754        SD(sh)->revision[3] = '.';
 755        SD(sh)->revision[4] = buff[35];
 756        SD(sh)->revision[5] = 0;
 757
 758        switch (be32_to_cpu(gc->len)) {
 759        case 0x1c:
 760                SD(sh)->EATA_revision = 'a';
 761                break;
 762        case 0x1e:
 763                SD(sh)->EATA_revision = 'b';
 764                break;
 765        case 0x22:
 766                SD(sh)->EATA_revision = 'c';
 767                break;
 768        case 0x24:
 769                SD(sh)->EATA_revision = 'z';
 770        default:
 771                SD(sh)->EATA_revision = '?';
 772        }
 773
 774        if (be32_to_cpu(gc->len) >= 0x22) {
 775                if (gc->is_PCI)
 776                        hd->bustype = IS_PCI;
 777                else if (gc->is_EISA)
 778                        hd->bustype = IS_EISA;
 779                else
 780                        hd->bustype = IS_ISA;
 781        } else {
 782                if (buff[21] == '4')
 783                        hd->bustype = IS_PCI;
 784                else if (buff[21] == '2')
 785                        hd->bustype = IS_EISA;
 786                else
 787                        hd->bustype = IS_ISA;
 788        }
 789
 790        SD(sh)->cplen = cplen;
 791        SD(sh)->cppadlen = cppadlen;
 792        SD(sh)->hostid = gc->scsi_id[3];
 793        SD(sh)->devflags = 1 << gc->scsi_id[3];
 794        SD(sh)->moresupport = gc->MORE_support;
 795        sh->unique_id = base;
 796        sh->base = base;
 797        sh->io_port = base;
 798        sh->n_io_port = 9;
 799        sh->irq = gc->IRQ;
 800        sh->dma_channel = PIO;
 801        sh->this_id = gc->scsi_id[3];
 802        sh->can_queue = 1;
 803        sh->cmd_per_lun = 1;
 804        sh->sg_tablesize = SG_ALL;
 805
 806        hd->channel = 0;
 807
 808        hd->pdev = pci_dev_get(pdev);   /* Keep a PCI reference */
 809
 810        sh->max_id = 8;
 811        sh->max_lun = 8;
 812
 813        if (gc->SECOND)
 814                hd->primary = 0;
 815        else
 816                hd->primary = 1;
 817
 818        hd->next = NULL;        /* build a linked list of all HBAs */
 819        hd->prev = last_HBA;
 820        if (hd->prev != NULL)
 821                SD(hd->prev)->next = sh;
 822        last_HBA = sh;
 823        if (first_HBA == NULL)
 824                first_HBA = sh;
 825        registered_HBAs++;
 826        return (1);
 827}
 828
 829static void find_pio_ISA(struct get_conf *buf)
 830{
 831        int i;
 832
 833        for (i = 0; i < MAXISA; i++) {
 834                if (!ISAbases[i])
 835                        continue;
 836                if (!get_pio_conf_PIO(ISAbases[i], buf))
 837                        continue;
 838                if (!register_pio_HBA(ISAbases[i], buf, NULL))
 839                        release_region(ISAbases[i], 9);
 840                else
 841                        ISAbases[i] = 0;
 842        }
 843        return;
 844}
 845
 846static void find_pio_EISA(struct get_conf *buf)
 847{
 848        u32 base;
 849        int i;
 850
 851#ifdef CHECKPAL
 852        u8 pal1, pal2, pal3;
 853#endif
 854
 855        for (i = 0; i < MAXEISA; i++) {
 856                if (EISAbases[i]) {     /* Still a possibility ?          */
 857
 858                        base = 0x1c88 + (i * 0x1000);
 859#ifdef CHECKPAL
 860                        pal1 = inb((u16) base - 8);
 861                        pal2 = inb((u16) base - 7);
 862                        pal3 = inb((u16) base - 6);
 863
 864                        if (((pal1 == 0x12) && (pal2 == 0x14)) || ((pal1 == 0x38) && (pal2 == 0xa3) && (pal3 == 0x82)) || ((pal1 == 0x06) && (pal2 == 0x94) && (pal3 == 0x24))) {
 865                                DBG(DBG_PROBE, printk(KERN_NOTICE "EISA EATA id tags found: " "%x %x %x \n", (int) pal1, (int) pal2, (int) pal3));
 866#endif
 867                                if (get_pio_conf_PIO(base, buf)) {
 868                                        DBG(DBG_PROBE && DBG_EISA, print_pio_config(buf));
 869                                        if (buf->IRQ) {
 870                                                if (!register_pio_HBA(base, buf, NULL))
 871                                                        release_region(base, 9);
 872                                        } else {
 873                                                printk(KERN_NOTICE "eata_dma: No valid IRQ. HBA " "removed from list\n");
 874                                                release_region(base, 9);
 875                                        }
 876                                }
 877                                /* Nothing found here so we take it from the list */
 878                                EISAbases[i] = 0;
 879#ifdef CHECKPAL
 880                        }
 881#endif
 882                }
 883        }
 884        return;
 885}
 886
 887static void find_pio_PCI(struct get_conf *buf)
 888{
 889#ifndef CONFIG_PCI
 890        printk("eata_dma: kernel PCI support not enabled. Skipping scan for PCI HBAs.\n");
 891#else
 892        struct pci_dev *dev = NULL;
 893        unsigned long base, x;
 894
 895        while ((dev = pci_get_device(PCI_VENDOR_ID_DPT, PCI_DEVICE_ID_DPT, dev)) != NULL) {
 896                DBG(DBG_PROBE && DBG_PCI, printk("eata_pio: find_PCI, HBA at %s\n", pci_name(dev)));
 897                if (pci_enable_device(dev))
 898                        continue;
 899                pci_set_master(dev);
 900                base = pci_resource_flags(dev, 0);
 901                if (base & IORESOURCE_MEM) {
 902                        printk("eata_pio: invalid base address of device %s\n", pci_name(dev));
 903                        continue;
 904                }
 905                base = pci_resource_start(dev, 0);
 906                /* EISA tag there ? */
 907                if ((inb(base) == 0x12) && (inb(base + 1) == 0x14))
 908                        continue;       /* Jep, it's forced, so move on  */
 909                base += 0x10;   /* Now, THIS is the real address */
 910                if (base != 0x1f8) {
 911                        /* We didn't find it in the primary search */
 912                        if (get_pio_conf_PIO(base, buf)) {
 913                                if (buf->FORCADR) {     /* If the address is forced */
 914                                        release_region(base, 9);
 915                                        continue;       /* we'll find it later      */
 916                                }
 917
 918                                /* OK. We made it till here, so we can go now  
 919                                 * and register it. We  only have to check and 
 920                                 * eventually remove it from the EISA and ISA list 
 921                                 */
 922
 923                                if (!register_pio_HBA(base, buf, dev)) {
 924                                        release_region(base, 9);
 925                                        continue;
 926                                }
 927
 928                                if (base < 0x1000) {
 929                                        for (x = 0; x < MAXISA; ++x) {
 930                                                if (ISAbases[x] == base) {
 931                                                        ISAbases[x] = 0;
 932                                                        break;
 933                                                }
 934                                        }
 935                                } else if ((base & 0x0fff) == 0x0c88) {
 936                                        x = (base >> 12) & 0x0f;
 937                                        EISAbases[x] = 0;
 938                                }
 939                        }
 940#ifdef CHECK_BLINK
 941                        else if (check_blink_state(base)) {
 942                                printk("eata_pio: HBA is in BLINK state.\n" "Consult your HBAs manual to correct this.\n");
 943                        }
 944#endif
 945                }
 946        }
 947#endif                          /* #ifndef CONFIG_PCI */
 948}
 949
 950static int eata_pio_detect(struct scsi_host_template *tpnt)
 951{
 952        struct Scsi_Host *HBA_ptr;
 953        struct get_conf gc;
 954        int i;
 955
 956        find_pio_PCI(&gc);
 957        find_pio_EISA(&gc);
 958        find_pio_ISA(&gc);
 959
 960        for (i = 0; i <= MAXIRQ; i++)
 961                if (reg_IRQ[i])
 962                        request_irq(i, do_eata_pio_int_handler, IRQF_DISABLED, "EATA-PIO", NULL);
 963
 964        HBA_ptr = first_HBA;
 965
 966        if (registered_HBAs != 0) {
 967                printk("EATA (Extended Attachment) PIO driver version: %d.%d%s\n"
 968                       "(c) 1993-95 Michael Neuffer, neuffer@goofy.zdv.uni-mainz.de\n" "            Alfred Arnold,   a.arnold@kfa-juelich.de\n" "This release only supports DASD devices (harddisks)\n", VER_MAJOR, VER_MINOR, VER_SUB);
 969
 970                printk("Registered HBAs:\n");
 971                printk("HBA no. Boardtype: Revis: EATA: Bus: BaseIO: IRQ: Ch: ID: Pr:" " QS: SG: CPL:\n");
 972                for (i = 1; i <= registered_HBAs; i++) {
 973                        printk("scsi%-2d: %.10s v%s 2.0%c  %s %#.4lx   %2d   %d   %d   %c"
 974                               "  %2d  %2d  %2d\n",
 975                               HBA_ptr->host_no, SD(HBA_ptr)->name, SD(HBA_ptr)->revision,
 976                               SD(HBA_ptr)->EATA_revision, (SD(HBA_ptr)->bustype == 'P') ?
 977                               "PCI " : (SD(HBA_ptr)->bustype == 'E') ? "EISA" : "ISA ",
 978                               HBA_ptr->base, HBA_ptr->irq, SD(HBA_ptr)->channel, HBA_ptr->this_id,
 979                               SD(HBA_ptr)->primary ? 'Y' : 'N', HBA_ptr->can_queue,
 980                               HBA_ptr->sg_tablesize, HBA_ptr->cmd_per_lun);
 981                        HBA_ptr = SD(HBA_ptr)->next;
 982                }
 983        }
 984        return (registered_HBAs);
 985}
 986
 987static struct scsi_host_template driver_template = {
 988        .proc_name              = "eata_pio",
 989        .name                   = "EATA (Extended Attachment) PIO driver",
 990        .proc_info              = eata_pio_proc_info,
 991        .detect                 = eata_pio_detect,
 992        .release                = eata_pio_release,
 993        .queuecommand           = eata_pio_queue,
 994        .eh_abort_handler       = eata_pio_abort,
 995        .eh_host_reset_handler  = eata_pio_host_reset,
 996        .use_clustering         = ENABLE_CLUSTERING,
 997};
 998
 999MODULE_AUTHOR("Michael Neuffer, Alfred Arnold");
1000MODULE_DESCRIPTION("EATA SCSI PIO driver");
1001MODULE_LICENSE("GPL");
1002
1003#include "scsi_module.c"
1004