LXR linux/drivers/parport/ChangeLog

   12001-10-11  Tim Waugh  <twaugh@redhat.com>
   2        * parport_pc.c, parport_serial.c: Support for NetMos cards.
   3        + Patch originally from Michael Reinelt <reinelt@eunet.at>.
   4
   52002-04-25  Tim Waugh  <twaugh@redhat.com>
   6
   7        * parport_serial.c, parport_pc.c: Move some SIIG cards around.
   8        Patch from Andrey Panin.
   9
  102002-01-20  Tim Waugh  <twaugh@redhat.com>
  11
  12        * parport_pc.c (parport_pc_compat_write_block_pio,
  13        parport_pc_ecp_write_block_pio, parport_pc_ecp_read_block_pio):
  14        Use the default implementations if the caller wants to use
  15        O_NONBLOCK.
  16
  172002-02-25  Tim Waugh  <twaugh@redhat.com>
  18
  19        * parport_pc.c: Make sure that priv->ctr_writable includes IntEn
  20        even if IRQ is given as a parameter.
  21
  222002-01-21  Tim Waugh  <twaugh@redhat.com>
  23
  24        * daisy.c: Apply patch from Max Vorobiev to make parport_daisy_select
  25        work for ECP/EPP modes.
  26
  272002-01-13  Niels Kristian Bech Jensen  <nkbj@image.dk>
  28
  29        * parport_pc.c: Change some occurrences of frob_set_mode to
  30        ECR_WRITE.  This fixes PLIP.
  31
  322002-01-04  Tim Waugh  <twaugh@redhat.com>
  33
  34        * share.c (parport_claim_or_block): Sleep interruptibly to prevent
  35        a possible deadlock.
  36
  372001-12-07  Damian Gruszka  <damian.gruszka@VisionSystems.de>
  38
  39        * parport_pc.c (ECR_WRITE): Define.  If there are forbidden bits
  40        in the ECR register for some chips, this will be a useful place to
  41        put that knowledge.
  42        (change_mode): Use ECR_WRITE.
  43        (parport_pc_restore_state): Likewise.
  44        (parport_ECPPS2_supported): Likewise.
  45        (parport_ECPEPP_supported): Likewise.
  46        (irq_probe_EPP): Likewise.
  47        (programmable_irq_support): Likewise.
  48        (programmable_dma_support): Likewise.
  49        (parport_pc_probe_port): Likewise.
  50
  51        (frob_set_mode): New function.  Set the mode bits of the ECR.
  52        (get_fifo_residue): Use frob_set_mode.
  53        (parport_pc_ecpepp_read_data): Likewise.
  54        (parport_pc_ecpepp_write_data): Likewise.
  55        (parport_pc_ecpepp_read_addr): Likewise.
  56        (parport_pc_ecpepp_write_addr): Likewise.
  57        (parport_pc_compat_write_block_pio): Likewise.
  58        (parport_pc_ecp_write_block_pio): Likewise.
  59        (parport_ECR_present): Likewise.
  60        (parport_ECP_supported): Likewise.
  61        (parport_EPP_supported): Likewise.
  62        (parport_ECPEPP_supported): Likewise.
  63        (programmable_irq_support): Likewise.
  64        (irq_probe_ECP): Likewise.
  65        (programmable_dma_support): Likewise.
  66
  67        (parport_pc_enable_irq): Only enable interrupts if we know which
  68        IRQ line they will come from.
  69        (parport_pc_init_state): Set nErrIntrEn at initialisation.
  70        (parport_pc_restore_state): Only write writable bits of CTR.
  71        (parport_irq_probe): If no IRQ is found, take ackIntEn out of the
  72        writable bit set.
  73
  742001-12-07  Tim Waugh  <twaugh@redhat.com>
  75
  76        * parport_pc.c (parport_pc_fifo_write_block_pio): Correct typo.
  77        (parport_pc_init_state): Only set ackIntEn if we know which IRQ
  78        line the interrupts will come from.
  79
  802001-12-07  Tim Waugh  <twaugh@redhat.com>
  81
  82        * ieee1284_ops.c (parport_ieee1284_epp_write_addr,
  83        parport_ieee1284_epp_read_addr): Actually do something useful.
  84
  852001-12-07  Tim Waugh  <twaugh@redhat.com>
  86
  87        * parport_pc.c (dmaval): Don't use DMA by default.  It seems to be
  88        too buggy at the moment.  Use 'dma=auto' to restore the previous
  89        behaviour.
  90
  912001-12-07  Tim Waugh  <twaugh@redhat.com>
  92
  93        * daisy.c (DEBUG): Undefine.
  94
  952001-12-06  Tim Waugh  <twaugh@redhat.com>
  96
  97        * ieee1284_ops.c (parport_ieee1284_ecp_read_data): Mask off
  98        PARPORT_CONTROL_AUTOFD as well.  Bug spotted by Joe
  99        <joeja@mindspring.com>.
 100
 1012001-12-03  Rich Liu  <Rich.Liu@ite.com.tw>
 102
 103        * parport_pc.c (sio_ite_8872_probe): ITE8873 is a single-port
 104        serial board, not a serial+parallel.
 105
 1062001-11-30  Niels Kristian Bech Jensen  <nkbj@image.dk>
 107
 108        * parport_pc.c: Fix compiler warning.
 109
 1102001-11-14  Tim Waugh  <twaugh@redhat.com>
 111
 112        * parport_pc.c (parport_pc_pci_probe): Hooks for PCI cards before
 113        and after probing for ports.
 114        * parport_serial.c (parport_register): Likewise.
 115
 1162001-11-12  Tim Waugh  <twaugh@redhat.com>
 117
 118        * parport_pc.c (init_module): Warn when parameters are ignored.
 119
 1202001-11-01  Damian Gruszka  <damian.gruszka@VisionSystems.de>
 121
 122        * parport_serial.c (serial_register): Set base_baud before
 123        calling register_serial.
 124
 1252001-10-26  Tim Waugh  <twaugh@redhat.com>
 126
 127        * parport_pc.c (parport_irq_probe): When ECR programmable IRQ
 128        support fails, generate interrupts using the FIFO even if we don't
 129        want to use the FIFO for real data transfers.
 130        (parport_pc_probe_port): Display the ECR address if we have an
 131        ECR, not just if we will use the FIFO.
 132
 1332001-10-24  Dave Strauss  <D.Strauss@motorola.com>
 134
 135        * parport_pc.c (parport_pc_compat_write_block_pio,
 136        parport_pc_ecp_write_block_pio): Allow a few seconds for an ECP
 137        transfer to finish up.
 138
 1392001-10-11  Tim Waugh  <twaugh@redhat.com>
 140
 141        * parport_pc (sio_ite_8872_probe): New function, submitted by Rich
 142        Liu from ITE.  Cleaned up, removed bogus phys_to_virt calls.
 143
 1442001-10-24  Tim Waugh  <twaugh@redhat.com>
 145
 146        * parport_pc.c: Support for AKS AladdinCARD.  Patch from
 147        Aladdin Knowledge Systems (Christian Groessler).
 148
 1492001-10-24  Tim Waugh  <twaugh@redhat.com>
 150        
 151        * ieee1284_ops.c (parport_ieee1284_ecp_read_data): Try to minimise
 152        turnaround time.
 153
 154        * ieee1284.c (parport_poll_peripheral): Try a couple of times
 155        first without delaying.
 156
 1572001-10-10  Tim Waugh  <twaugh@redhat.com>
 158
 159        * parport_pc.c: Support for OX16PCI954 PCI card.
 160
 1612001-10-10  Tim Waugh  <twaugh@redhat.com>
 162
 163        * parport_pc.c: Support for OX12PCI840 PCI card (reported by
 164        mk@daveg.com).  Lock-ups diagnosed by Ronnie Arosa (and now we
 165        just don't trust its ECR).
 166
 1672001-10-10  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
 168
 169        * parport_pc.c: Support for AVLAB cards.
 170
 1712001-10-10  Tim Waugh  <twaugh@redhat.com>
 172
 173        * ieee1284_ops.c (ecp_forward_to_reverse, ecp_reverse_to_forward):
 174        Remember to retry direction switch if it fails.  Patch from David
 175        Lambert.
 176
 1772001-10-08  David C. Hansen  <haveblue@us.ibm.com>
 178
 179        * share.c: Make driverlist_lock and parportlist_lock static.
 180
 1812001-10-08  Philip Blundell  <philb@gnu.org>
 182
 183        * parport_pc.c: New modular parameter verbose_logging.
 184        Make port->modes indicate the modes that we are prepared to use,
 185        rather than the modes that are available.
 186
 1872001-10-07  Tim Waugh  <twaugh@redhat.com>
 188
 189        * parport_pc.c (parport_pc_probe_port): Fix memory leak spotted by
 190        Kipp Cannon.
 191
 1922001-10-07  Tim Waugh  <twaugh@redhat.com>
 193
 194        * parport_serial.c: Remove NetMos support, since it causes problems
 195        for some people.
 196
 1972001-08-30  Tim Waugh  <twaugh@redhat.com>
 198
 199        * parport_serial.c (parport_serial_pci_probe): Clean-up on partial
 200        registration failure.
 201
 2022001-08-14  Tim Waugh  <twaugh@redhat.com>
 203
 204        * parport_pc.c (parport_pc_init_superio): Allow for more than one
 205        SuperIO device.  Patch from Rich Lio (ITE).
 206
 2072001-08-11  Tim Waugh  <twaugh@redhat.com>
 208
 209        * parport_pc.c: Support for Titan Electronics cards.
 210
 2112001-08-08  Tim Waugh  <twaugh@redhat.com>
 212
 213        * share.c (parport_unregister_device): Remove device from wait list
 214        too.
 215
 2162001-06-20  Tim Waugh  <twaugh@redhat.com>
 217
 218        * parport_pc.c: Make 'io_hi=0' work.
 219
 2202001-05-31  Tim Waugh  <twaugh@redhat.com>
 221
 222        * parport_serial.c: New file.
 223
 2242001-06-05  Tim Waugh  <twaugh@redhat.com>
 225
 226        * parport_pc.c (parport_pc_unregister_port): New exported function.
 227        Do the opposite of parport_pc_probe_port.
 228        (cleanup_module): Use it.
 229
 2302001-05-22  Juan Quintela  <quintela@mandrakesoft.com>
 231
 232        * parport_amiga.c: Set printk levels.
 233        * parport_gsc.c: Likewise.
 234        * parport_mfc3.c: Likewise.
 235        * parport_pc.c: Likewise.
 236        * parport_sunbpp.c: Likewise.
 237        * probe.c: Likewise.
 238        * share.c: Likewise.
 239
 2402001-05-10  Fred Barnes  <frmb2@ukc.ac.uk>
 241
 242       * parport_pc.c (parport_pc_epp_read_data): added support for
 243       reading from a w91284pic peripheral, flag is PARPORT_W91284PIC.
 244
 2452001-05-07  Fred Barnes  <frmb2@ukc.ac.uk>
 246 
 247        * parport_pc.c (parport_pc_epp_read_data,
 248        parport_pc_epp_write_data, parport_pc_epp_read_addr,
 249        parport_pc_epp_write_addr): support for fast reads/writes using
 250        the PARPORT_EPP_FAST flag.
 251 
 252        * ieee1284.c (parport_read, parport_write): added code to handle
 253        software EPP mode (IEEE1284_MODE_EPPSWE).  Added code to allow
 254        BYTE mode reverse transfers (previously always went for NIBBLE
 255        mode).
 256 
 257        * ieee1284_ops.c (parport_ieee1284_epp_read_data,
 258        parport_ieee1284_epp_write_data): fixed various polarity problems.
 259        Also (theoretically) fixed address versions (.._addr), but no
 260        hardware to test this on.
 261 
 262        * parport_pc.h: added parport_dump_state() function for debugging.
 263        Needs to have DEBUG_PARPORT to be defined for it to be included.
 264 
 2652001-05-03  Tim Waugh  <twaugh@redhat.com>
 266
 267        * parport_pc.c: Fix the compile problem I introduce from the last
 268        change.
 269
 2702001-04-20  Paul Gortmaker  <p_gortmaker@yahoo.com>
 271
 272        * parport_pc.c: Cut down the size quite a bit (more than 4k off
 273        the object, about 1k off the zImage) for the older non-PCI
 274        machines which are typically resource starved anyway...
 275
 2762001-03-26  R Horn  <rjh@world.std.com>
 277
 278        * parport_pc.c: Some commentary changes.
 279
 2802001-04-19  Tim Waugh  <twaugh@redhat.com>
 281
 282        * parport_pc.c (parport_pc_probe_port): Remove __devinit
 283        attribute.  Export unconditionally.
 284
 2852001-04-14  Jeff Garzik  <jgarzik@pobox.com>
 286
 287        Merged:  2001-03-30  Tim Waugh  <twaugh@redhat.com>
 288
 289        * drivers/parport/parport_pc.c: Make Via SuperIO chipsets behave
 290        like everything else with respect to irq= and dma= parameters.
 291
 2922001-04-08  Tim Waugh  <twaugh@redhat.com>
 293
 294      * parport_pc.c (parport_pc_save_state): Read from the soft copy of
 295      the control port.
 296      (parport_pc_restore_state): Update the soft copy of the control
 297      port.
 298
 2992001-03-26  Tim Waugh  <twaugh@redhat.com>
 300
 301        * share.c (parport_find_number, parport_find_base): Trigger
 302        a lowlevel driver load if there are no ports yet.
 303
 3042001-03-26  Tim Waugh  <twaugh@redhat.com>
 305
 306        * parport_pc.c (parport_ECP_supported): Remove the IRQ conflict
 307        check since it seems totally unreliable.
 308
 3092001-03-02  Tim Waugh  <twaugh@redhat.com>
 310
 311        * ieee1284_ops.c (parport_ieee1284_read_nibble): Reset nAutoFd
 312        on timeout.  Matches 2.2.x behaviour.
 313
 3142001-03-02  Andrew Morton
 315
 316        * parport_pc.c (registered_parport): New static variable.
 317        (parport_pc_find_ports): Set it when we register PCI driver.
 318        (init_module): Unregister PCI driver if necessary when we
 319        fail.
 320
 3212001-03-02  Tim Waugh  <twaugh@redhat.com>
 322
 323        * ieee1284_ops.c (parport_ieee1284_write_compat): Don't use
 324        down_trylock to reset the IRQ count.  Don't even use sema_init,
 325        because it's not even necessary to reset the count.  I can't
 326        remember why we ever did.
 327
 3282001-01-04  Peter Osterlund  <peter.osterlund@mailbox.swipnet.se>
 329
 330        * ieee1284.c (parport_negotiate): Fix missing printk argument.
 331
 3322001-01-03  Paul Schleger  <Paul.Schleger@t-online.de>
 333
 334        * probe.c (parse_data): Get rid of trailing blanks in values.
 335        Needed for XEROX XJ8C printer.
 336
 3372001-01-03  Tim Waugh  <twaugh@redhat.com>
 338
 339        * parport_pc.c (parport_pc_probe_port): Say something when probes
 340        are omitted.
 341
 3422001-01-03  Tim Waugh  <twaugh@redhat.com>
 343
 344        * parport_pc.c (sio_via_686a_probe): Correct dma=255 fix.
 345
 3462000-11-21  Tim Waugh  <twaugh@redhat.com>
 347
 348        * parport_pc.c (parport_pc_ecp_write_block_pio): Fix
 349        reverse-to-forward logic.  Spotted by Roland Kuck
 350        <rci@cityweb.de>.
 351
 3522000-09-16  Cesar Eduardo Barros  <cesarb@nitnet.com.br>
 353
 354        * parport_pc.c (sio_via_686a_probe): Handle case
 355        where hardware returns 255 for IRQ or DMA.
 356
 3572000-07-20  Eddie C. Dost  <ecd@skynet.be>
 358
 359        * share.c (attach_driver_chain): attach[i](port) needs to be
 360        replaced by attach[count](port).
 361
 3622000-07-20  Eddie C. Dost  <ecd@skynet.be>
 363
 364        * daisy.c (add_dev): kmalloc args are in wrong order.
 365
 3662000-07-12  Tim Waugh  <twaugh@redhat.com>
 367
 368        * share.c: Documentation for parport_{get,port}_port,
 369        parport_find_{number,base}.
 370
 3712000-07-12  Tim Waugh  <twaugh@redhat.com>
 372
 373        * share.c (parport_unregister_device): Remove unneeded locking
 374        (test cad==dev).
 375        (parport_claim): Likewise.
 376        (parport_find_number): New function.
 377
 3782000-07-12  Tim Waugh  <twaugh@redhat.com>
 379
 380        * share.c (parport_register_port): Hold the parportlist_lock while
 381        looking for a free parport number.
 382        (parport_register_driver): Make sure that attach can block.
 383        (attach_driver_chain): Likewise.
 384
 3852000-07-12  Tim Waugh  <twaugh@redhat.com>
 386
 387        * share.c (call_driver_chain): Do reference counting things.
 388        (parport_get_port): New function.
 389        (parport_put_port): New function.
 390        (parport_register_port): Initialise reference count to zero.
 391        (parport_unregister_port): Check reference count rather than
 392        driver list to see if we can free the port.
 393
 3942000-07-12  Tim Waugh  <twaugh@redhat.com>
 395
 396        * share.c: Clarifications in doc comments.
 397
 3982000-07-12  Tim Waugh  <twaugh@redhat.com>
 399
 400        * share.c (parport_unregister_port): Fix typo in comment.
 401
 4022000-07-11  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
 403
 404        * parport_pc.c: Support for the full range of Timedia cards.
 405
 4062000-07-08  Tim Waugh  <twaugh@redhat.com>
 407
 408        * daisy.c: License block comments as part of parportbook.
 409        * ieee1284.c: Likewise.
 410        * share.c: Likewise.
 411
 4122000-06-30  Petr Vandrovec  <vandrove@vc.cvut.cz>
 413
 414        * procfs.c (do_hardware_modes): Generated string can be up to 34
 415        chars long.
 416
 4172000-06-20  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
 418
 419        * parport_pc.c (parport_pc_compat_write_block_pio): Warn about
 420        change_mode failures.
 421        (parport_pc_ecp_write_block_pio): Likewise.
 422        (parport_pc_ecp_read_block_pio): Likewise.
 423
 4242000-06-20  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
 425
 426        * parport_pc.c (parport_SPP_supported): Warn more about possibly
 427        incorrect parameters.
 428
 4292000-06-15  Tim Waugh  <twaugh@redhat.com>
 430
 431        * parport_pc.c (parport_ECP_supported): Set PARPORT_MODE_COMPAT
 432        for ECP ports, since they can all do hardware accelerated
 433        compatibility mode (I assume).
 434
 4352000-06-13  Tim Waugh  <twaugh@redhat.com>
 436
 437        * parport_pc.c (cleanup_module): Remark about possible bugs.
 438
 4392000-06-13  Tim Waugh  <twaugh@redhat.com>
 440
 441        * procfs.c: Break 'hardware' out into separate files.
 442
 4432000-05-28  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
 444
 445        * Fix PCI ID printk for non-superio PCI cards.
 446
 4472000-05-28  Tim Waugh  <twaugh@redhat.com>
 448
 449        * share.c (call_driver_chain): Get the driverlist_lock.
 450        (parport_register_device): Make sure that port->devices always
 451        looks consistent.
 452        (parport_register_driver): Ensure that parport drivers are given
 453        parameters that are valid for the duration of the callback by
 454        locking the portlist against changes.
 455        (parport_unregister_driver): Likewise.
 456        (parport_claim): Don't overwrite flags.
 457
 4582000-05-28  Tim Waugh  <twaugh@redhat.com>
 459
 460        * daisy.c (assign_addrs): Avoid double-probing daisy-chain devices
 461        if the first probe succeeds.
 462
 4632000-05-16  Tim Waugh  <twaugh@redhat.com>
 464
 465        * share.c (parport_claim): Fix SMP race.
 466
 4672000-05-15  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
 468
 469        * parport_pc.c (parport_pc_compat_write_block_pio): Check for
 470        timeouts.
 471        (parport_pc_ecp_write_block_pio): Likewise.
 472        (parport_pc_ecp_read_block_pio): Likewise.
 473
 4742000-05-02  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
 475
 476        * parport_pc.c: PCI SYBA patch and verbose PCI detection.
 477
 4782000-05-02  Gunther Mayer  <gunther.mayer@braunschweig.okersurf.de>
 479
 480        * parport_pc.c (decode_smsc): Fix SMSC 665/666 identification.
 481
 4822000-04-28  Tim Waugh  <twaugh@redhat.com>
 483
 484        * ieee1284.c: Short function descriptions can't be multiline.
 485
 486        * daisy.c: Short function descriptions can't be multiline.
 487
 4882000-04-19  Tim Waugh  <twaugh@redhat.com>
 489
 490        * parport_pc.c (parport_pc_fifo_write_block_dma): Make maxlen
 491        calculation a bit clearer.
 492
 493        * ieee1284.c (parport_negotiate): Turn on data line drivers.
 494
 495        * ieee1284_ops.c (parport_ieee1284_read_byte): Turn off data line
 496        drivers.
 497        (parport_ieee1284_write_compat): Turn on data line drivers.
 498
 499        * daisy.c (assign_addrs): Turn on data line drivers.
 500        (cpp_mux): Likewise.
 501        (cpp_daisy): Likewise.
 502
 5032000-04-04  Tim Waugh  <twaugh@redhat.com>
 504
 505        * parport_pc.c: Add support for another PCI card.
 506
 5072000-04-04  Tim Waugh  <twaugh@redhat.com>
 508
 509        * daisy.c: Documentation in kernel-doc format.
 510
 511        * ieee1284.c: Likewise.
 512
 513        * share.c: Likewise.
 514
 5152000-04-01  Tim Waugh  <twaugh@redhat.com>
 516
 517        * share.c (parport_register_device): Need to hold the module
 518        reference counts before sleeping.
 519
 5202000-03-27  Tim Waugh  <twaugh@redhat.com>
 521
 522        * parport_pc.c (parport_pc_ecp_read_block_pio): Correct operation
 523        when peripheral is trying to send data when we stop listening.
 524
 5252000-03-22  Tim Waugh  <twaugh@redhat.com>
 526
 527        * init.c (parport_setup): Fix return value.
 528
 5292000-03-21  Tim Waugh  <twaugh@redhat.com>
 530
 531        * parport_pc.c (parport_pc_pci_probe): Fix return value; call
 532        pci_enable_device.
 533
 5342000-03-16  Tim Waugh  <twaugh@redhat.com>
 535
 536        * parport_pc.c (parport_ECP_supported): This seems to trigger on
 537        machines that don't have an IRQ conflict; toned down the warning
 538        message accordingly.
 539
 5402000-03-16  Gunther Mayer  <gunther.mayer@braunschweig.netsurf.de>
 541
 542        * parport_pc.c (show_parconfig_smsc37c669): Fix typo.
 543        (decode_winbond): More IDs.
 544        (winbond_check): Protect against false positives.
 545        (winbond_check2): Likewise.
 546        (smsc_check): Likewise.
 547
 5482000-03-15  Tim Waugh  <twaugh@redhat.com>
 549
 550        * parport_pc.c (cleanup_module): Don't call pci_unregister_driver
 551        if we didn't call pci_register_driver first.
 552
 5532000-03-13  Tim Waugh  <twaugh@redhat.com>
 554
 555        * parport_pc.c (parport_pc_init): Moved from asm/parport.h.
 556
 557        * Config.in: CONFIG_PARPORT_PC_SUPERIO: new option.
 558
 559        * parport_pc.c (show_parconfig_smsc37c669): Make __devinit.
 560        (show_parconfig_winbond): Likewise.
 561        (decode_winbond): Likewise.
 562        (decode_smsc): Likewise.
 563        (winbond_check): Likewise.
 564        (winbond_check2): Likewise.
 565        (smsc_check): Likewise.
 566        (detect_and_report_winbond): Likewise.
 567        (detect_and_report_smsc): Likewise.
 568        (get_superio_dma): Likewise.
 569        (get_superio_irq): Likewise.
 570        (parport_pc_find_isa_ports): New function.
 571        (parport_pc_find_ports): New function.
 572        (init_module): Make superio a config option, not a parameter.
 573
 5742000-03-10  Tim Waugh  <twaugh@redhat.com>
 575
 576        * parport_pc.c (decode_winbond): Use correct 83877ATF chip ID.
 577        (decode_winbond): Fix typo.
 578
 5792000-03-09  Tim Waugh  <twaugh@redhat.com>
 580
 581        * parport_pc.c: Integrate SuperIO PCI probe with normal PCI card
 582        probe, so that the MODULE_DEVICE_TABLE is complete.
 583
 584