/*
 * eisa.c - provide support for EISA adapters in PA-RISC machines
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version
 * 2 of the License, or (at your option) any later version.
 *
 * Copyright (c) 2001 Matthew Wilcox for Hewlett Packard
 * Copyright (c) 2001 Daniel Engstrom <5116@telia.com>
 *
 * There are two distinct EISA adapters.  Mongoose is found in machines
 * before the 712; then the Wax ASIC is used.  To complicate matters, the
 * Wax ASIC also includes a PS/2 and RS-232 controller, but those are
 * dealt with elsewhere; this file is concerned only with the EISA portions
 * of Wax.
 * 
 * 
 * HINT:
 * -----
 * To allow an ISA card to work properly in the EISA slot you need to
 * set an edge trigger level. This may be done on the palo command line 
 * by adding the kernel parameter "eisa_irq_edge=n,n2,[...]]", with 
 * n and n2 as the irq levels you want to use.
 * 
 * Example: "eisa_irq_edge=10,11" allows ISA cards to operate at 
 * irq levels 10 and 11.
 */

#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/eisa.h>

#include <asm/byteorder.h>
#include <asm/io.h>
#include <asm/hardware.h>
#include <asm/processor.h>
#include <asm/parisc-device.h>
#include <asm/delay.h>
#include <asm/eisa_bus.h>
#include <asm/eisa_eeprom.h>

#if 0
#define EISA_DBG(msg, arg... ) printk(KERN_DEBUG "eisa: " msg , ## arg )
#else
#define EISA_DBG(msg, arg... )  
#endif

#define SNAKES_EEPROM_BASE_ADDR 0xF0810400
#define MIRAGE_EEPROM_BASE_ADDR 0xF00C0400

static DEFINE_SPINLOCK(eisa_irq_lock);

void __iomem *eisa_eeprom_addr __read_mostly;

/* We can only have one EISA adapter in the system because neither
 * implementation can be flexed.
 */
static struct eisa_ba {
        struct pci_hba_data     hba;
        unsigned long eeprom_addr;
        struct eisa_root_device root;
} eisa_dev;

/* Port ops */

static inline unsigned long eisa_permute(unsigned short port)
{
        if (port & 0x300) {
                return 0xfc000000 | ((port & 0xfc00) >> 6)
                        | ((port & 0x3f8) << 9) | (port & 7);
        } else {
                return 0xfc000000 | port;
        }
}

unsigned char eisa_in8(unsigned short port)
{
        if (EISA_bus)
                return gsc_readb(eisa_permute(port));
        return 0xff;
}

unsigned short eisa_in16(unsigned short port)
{
        if (EISA_bus)
                return le16_to_cpu(gsc_readw(eisa_permute(port)));
        return 0xffff;
}

unsigned int eisa_in32(unsigned short port)
{
        if (EISA_bus)
                return le32_to_cpu(gsc_readl(eisa_permute(port)));
        return 0xffffffff;
}

void eisa_out8(unsigned char data, unsigned short port)
{
        if (EISA_bus)
                gsc_writeb(data, eisa_permute(port));
}

void eisa_out16(unsigned short data, unsigned short port)
{
        if (EISA_bus)   
                gsc_writew(cpu_to_le16(data), eisa_permute(port));
}

void eisa_out32(unsigned int data, unsigned short port)
{
        if (EISA_bus)
                gsc_writel(cpu_to_le32(data), eisa_permute(port));
}

#ifndef CONFIG_PCI
/* We call these directly without PCI.  See asm/io.h. */
EXPORT_SYMBOL(eisa_in8);
EXPORT_SYMBOL(eisa_in16);
EXPORT_SYMBOL(eisa_in32);
EXPORT_SYMBOL(eisa_out8);
EXPORT_SYMBOL(eisa_out16);
EXPORT_SYMBOL(eisa_out32);
#endif

/* Interrupt handling */

/* cached interrupt mask registers */
static int master_mask;
static int slave_mask;

/* the trig level can be set with the
 * eisa_irq_edge=n,n,n commandline parameter 
 * We should really read this from the EEPROM 
 * in the furure. 
 */
/* irq 13,8,2,1,0 must be edge */
static unsigned int eisa_irq_level __read_mostly; /* default to edge triggered */


/* called by free irq */
static void eisa_disable_irq(unsigned int irq)
{
        unsigned long flags;

        EISA_DBG("disable irq %d\n", irq);
        /* just mask for now */
        spin_lock_irqsave(&eisa_irq_lock, flags);
        if (irq & 8) {
                slave_mask |= (1 << (irq&7));
                eisa_out8(slave_mask, 0xa1);
        } else {
                master_mask |= (1 << (irq&7));
                eisa_out8(master_mask, 0x21);
        }
        spin_unlock_irqrestore(&eisa_irq_lock, flags);
        EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21));
        EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1));
}

/* called by request irq */
static void eisa_enable_irq(unsigned int irq)
{
        unsigned long flags;
        EISA_DBG("enable irq %d\n", irq);
                
        spin_lock_irqsave(&eisa_irq_lock, flags);
        if (irq & 8) {
                slave_mask &= ~(1 << (irq&7));
                eisa_out8(slave_mask, 0xa1);
        } else {
                master_mask &= ~(1 << (irq&7));
                eisa_out8(master_mask, 0x21);
        }
        spin_unlock_irqrestore(&eisa_irq_lock, flags);
        EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21));
        EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1));
}

static unsigned int eisa_startup_irq(unsigned int irq)
{
        eisa_enable_irq(irq);
        return 0;
}

static struct hw_interrupt_type eisa_interrupt_type = {
        .typename =     "EISA",
        .startup =      eisa_startup_irq,
        .shutdown =     eisa_disable_irq,
        .enable =       eisa_enable_irq,
        .disable =      eisa_disable_irq,
        .ack =          no_ack_irq,
        .end =          no_end_irq,
};

static irqreturn_t eisa_irq(int wax_irq, void *intr_dev)
{
        int irq = gsc_readb(0xfc01f000); /* EISA supports 16 irqs */
        unsigned long flags;
        
        spin_lock_irqsave(&eisa_irq_lock, flags);
        /* read IRR command */
        eisa_out8(0x0a, 0x20);
        eisa_out8(0x0a, 0xa0);

        EISA_DBG("irq IAR %02x 8259-1 irr %02x 8259-2 irr %02x\n",
                   irq, eisa_in8(0x20), eisa_in8(0xa0));
   
        /* read ISR command */
        eisa_out8(0x0a, 0x20);
        eisa_out8(0x0a, 0xa0);
        EISA_DBG("irq 8259-1 isr %02x imr %02x 8259-2 isr %02x imr %02x\n",
                 eisa_in8(0x20), eisa_in8(0x21), eisa_in8(0xa0), eisa_in8(0xa1));
        
        irq &= 0xf;
        
        /* mask irq and write eoi */
        if (irq & 8) {
                slave_mask |= (1 << (irq&7));
                eisa_out8(slave_mask, 0xa1);
                eisa_out8(0x60 | (irq&7),0xa0);/* 'Specific EOI' to slave */
                eisa_out8(0x62,0x20);   /* 'Specific EOI' to master-IRQ2 */
                
        } else {
                master_mask |= (1 << (irq&7));
                eisa_out8(master_mask, 0x21);
                eisa_out8(0x60|irq,0x20);       /* 'Specific EOI' to master */
        }
        spin_unlock_irqrestore(&eisa_irq_lock, flags);

        __do_IRQ(irq);
   
        spin_lock_irqsave(&eisa_irq_lock, flags);
        /* unmask */
        if (irq & 8) {
                slave_mask &= ~(1 << (irq&7));
                eisa_out8(slave_mask, 0xa1);
        } else {
                master_mask &= ~(1 << (irq&7));
                eisa_out8(master_mask, 0x21);
        }
        spin_unlock_irqrestore(&eisa_irq_lock, flags);
        return IRQ_HANDLED;
}

static irqreturn_t dummy_irq2_handler(int _, void *dev)
{
        printk(KERN_ALERT "eisa: uhh, irq2?\n");
        return IRQ_HANDLED;
}

static struct irqaction irq2_action = {
        .handler = dummy_irq2_handler,
        .name = "cascade",
};

static void init_eisa_pic(void)
{
        unsigned long flags;
        
        spin_lock_irqsave(&eisa_irq_lock, flags);

        eisa_out8(0xff, 0x21); /* mask during init */
        eisa_out8(0xff, 0xa1); /* mask during init */
        
        /* master pic */
        eisa_out8(0x11,0x20); /* ICW1 */   
        eisa_out8(0x00,0x21); /* ICW2 */   
        eisa_out8(0x04,0x21); /* ICW3 */   
        eisa_out8(0x01,0x21); /* ICW4 */   
        eisa_out8(0x40,0x20); /* OCW2 */   
        
        /* slave pic */
        eisa_out8(0x11,0xa0); /* ICW1 */   
        eisa_out8(0x08,0xa1); /* ICW2 */   
        eisa_out8(0x02,0xa1); /* ICW3 */   
        eisa_out8(0x01,0xa1); /* ICW4 */   
        eisa_out8(0x40,0xa0); /* OCW2 */   
        
        udelay(100);
        
        slave_mask = 0xff; 
        master_mask = 0xfb; 
        eisa_out8(slave_mask, 0xa1); /* OCW1 */
        eisa_out8(master_mask, 0x21); /* OCW1 */
        
        /* setup trig level */
        EISA_DBG("EISA edge/level %04x\n", eisa_irq_level);
        
        eisa_out8(eisa_irq_level&0xff, 0x4d0); /* Set all irq's to edge  */
        eisa_out8((eisa_irq_level >> 8) & 0xff, 0x4d1); 
        
        EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21));
        EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1));
        EISA_DBG("pic0 edge/level %02x\n", eisa_in8(0x4d0));
        EISA_DBG("pic1 edge/level %02x\n", eisa_in8(0x4d1));
        
        spin_unlock_irqrestore(&eisa_irq_lock, flags);
}

/* Device initialisation */

#define is_mongoose(dev) (dev->id.sversion == 0x00076)

static int __init eisa_probe(struct parisc_device *dev)
{
        int i, result;

        char *name = is_mongoose(dev) ? "Mongoose" : "Wax";

        printk(KERN_INFO "%s EISA Adapter found at 0x%08lx\n", 
                name, (unsigned long)dev->hpa.start);

        eisa_dev.hba.dev = dev;
        eisa_dev.hba.iommu = ccio_get_iommu(dev);

        eisa_dev.hba.lmmio_space.name = "EISA";
        eisa_dev.hba.lmmio_space.start = F_EXTEND(0xfc000000);
        eisa_dev.hba.lmmio_space.end = F_EXTEND(0xffbfffff);
        eisa_dev.hba.lmmio_space.flags = IORESOURCE_MEM;
        result = ccio_request_resource(dev, &eisa_dev.hba.lmmio_space);
        if (result < 0) {
                printk(KERN_ERR "EISA: failed to claim EISA Bus address space!\n");
                return result;
        }
        eisa_dev.hba.io_space.name = "EISA";
        eisa_dev.hba.io_space.start = 0;
        eisa_dev.hba.io_space.end = 0xffff;
        eisa_dev.hba.lmmio_space.flags = IORESOURCE_IO;
        result = request_resource(&ioport_resource, &eisa_dev.hba.io_space);
        if (result < 0) {
                printk(KERN_ERR "EISA: failed to claim EISA Bus port space!\n");
                return result;
        }
        pcibios_register_hba(&eisa_dev.hba);

        result = request_irq(dev->irq, eisa_irq, IRQF_SHARED, "EISA", &eisa_dev);
        if (result) {
                printk(KERN_ERR "EISA: request_irq failed!\n");
                return result;
        }
        
        /* Reserve IRQ2 */
        irq_to_desc(2)->action = &irq2_action;
        
        for (i = 0; i < 16; i++) {
                irq_to_desc(i)->chip = &eisa_interrupt_type;
        }
        
        EISA_bus = 1;

        if (dev->num_addrs) {
                /* newer firmware hand out the eeprom address */
                eisa_dev.eeprom_addr = dev->addr[0];
        } else {
                /* old firmware, need to figure out the box */
                if (is_mongoose(dev)) {
                        eisa_dev.eeprom_addr = SNAKES_EEPROM_BASE_ADDR;
                } else {
                        eisa_dev.eeprom_addr = MIRAGE_EEPROM_BASE_ADDR;
                }
        }
        eisa_eeprom_addr = ioremap_nocache(eisa_dev.eeprom_addr, HPEE_MAX_LENGTH);
        result = eisa_enumerator(eisa_dev.eeprom_addr, &eisa_dev.hba.io_space,
                        &eisa_dev.hba.lmmio_space);
        init_eisa_pic();

        if (result >= 0) {
                /* FIXME : Don't enumerate the bus twice. */
                eisa_dev.root.dev = &dev->dev;
                dev->dev.driver_data = &eisa_dev.root;
                eisa_dev.root.bus_base_addr = 0;
                eisa_dev.root.res = &eisa_dev.hba.io_space;
                eisa_dev.root.slots = result;
                eisa_dev.root.dma_mask = 0xffffffff; /* wild guess */
                if (eisa_root_register (&eisa_dev.root)) {
                        printk(KERN_ERR "EISA: Failed to register EISA root\n");
                        return -1;
                }
        }
        
        return 0;
}

static const struct parisc_device_id eisa_tbl[] = {
        { HPHW_BA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00076 }, /* Mongoose */
        { HPHW_BA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00090 }, /* Wax EISA */
        { 0, }
};

MODULE_DEVICE_TABLE(parisc, eisa_tbl);

static struct parisc_driver eisa_driver = {
        .name =         "eisa_ba",
        .id_table =     eisa_tbl,
        .probe =        eisa_probe,
};

void __init eisa_init(void)
{
        register_parisc_driver(&eisa_driver);
}


static unsigned int eisa_irq_configured;
void eisa_make_irq_level(int num)
{
        if (eisa_irq_configured& (1<<num)) {
                printk(KERN_WARNING
                       "IRQ %d polarity configured twice (last to level)\n", 
                       num);
        }
        eisa_irq_level |= (1<<num); /* set the corresponding bit */
        eisa_irq_configured |= (1<<num); /* set the corresponding bit */
}

void eisa_make_irq_edge(int num)
{
        if (eisa_irq_configured& (1<<num)) {
                printk(KERN_WARNING 
                       "IRQ %d polarity configured twice (last to edge)\n",
                       num);
        }
        eisa_irq_level &= ~(1<<num); /* clear the corresponding bit */
        eisa_irq_configured |= (1<<num); /* set the corresponding bit */
}

static int __init eisa_irq_setup(char *str)
{
        char *cur = str;
        int val;

        EISA_DBG("IRQ setup\n");
        while (cur != NULL) {
                char *pe;
                
                val = (int) simple_strtoul(cur, &pe, 0);
                if (val > 15 || val < 0) {
                        printk(KERN_ERR "eisa: EISA irq value are 0-15\n");
                        continue;
                }
                if (val == 2) { 
                        val = 9;
                }
                eisa_make_irq_edge(val); /* clear the corresponding bit */
                EISA_DBG("setting IRQ %d to edge-triggered mode\n", val);
                
                if ((cur = strchr(cur, ','))) {
                        cur++;
                } else {
                        break;
                }
        }
        return 1;
}

__setup("eisa_irq_edge=", eisa_irq_setup);