/*
 *      i6300esb:       Watchdog timer driver for Intel 6300ESB chipset
 *
 *      (c) Copyright 2004 Google Inc.
 *      (c) Copyright 2005 David H\xC3\xA4rdeman <david@2gen.com>
 *
 *      This program is free software; you can redistribute it and/or
 *      modify it under the terms of the GNU General Public License
 *      as published by the Free Software Foundation; either version
 *      2 of the License, or (at your option) any later version.
 *
 *      based on i810-tco.c which is in turn based on softdog.c
 *
 *      The timer is implemented in the following I/O controller hubs:
 *      (See the intel documentation on http://developer.intel.com.)
 *      6300ESB chip : document number 300641-004
 *
 *  2004YYZZ Ross Biro
 *      Initial version 0.01
 *  2004YYZZ Ross Biro
 *      Version 0.02
 *  20050210 David H\xC3\xA4rdeman <david@2gen.com>
 *      Ported driver to kernel 2.6
 */

/*
 *      Includes, defines, variables, module parameters, ...
 */

#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/uaccess.h>
#include <linux/io.h>

/* Module and version information */
#define ESB_VERSION "0.04"
#define ESB_MODULE_NAME "i6300ESB timer"
#define ESB_DRIVER_NAME ESB_MODULE_NAME ", v" ESB_VERSION
#define PFX ESB_MODULE_NAME ": "

/* PCI configuration registers */
#define ESB_CONFIG_REG  0x60            /* Config register                   */
#define ESB_LOCK_REG    0x68            /* WDT lock register                 */

/* Memory mapped registers */
#define ESB_TIMER1_REG (BASEADDR + 0x00)/* Timer1 value after each reset     */
#define ESB_TIMER2_REG (BASEADDR + 0x04)/* Timer2 value after each reset     */
#define ESB_GINTSR_REG (BASEADDR + 0x08)/* General Interrupt Status Register */
#define ESB_RELOAD_REG (BASEADDR + 0x0c)/* Reload register                   */

/* Lock register bits */
#define ESB_WDT_FUNC    (0x01 << 2)   /* Watchdog functionality            */
#define ESB_WDT_ENABLE  (0x01 << 1)   /* Enable WDT                        */
#define ESB_WDT_LOCK    (0x01 << 0)   /* Lock (nowayout)                   */

/* Config register bits */
#define ESB_WDT_REBOOT  (0x01 << 5)   /* Enable reboot on timeout          */
#define ESB_WDT_FREQ    (0x01 << 2)   /* Decrement frequency               */
#define ESB_WDT_INTTYPE (0x11 << 0)   /* Interrupt type on timer1 timeout  */

/* Reload register bits */
#define ESB_WDT_TIMEOUT (0x01 << 9)    /* Watchdog timed out                */
#define ESB_WDT_RELOAD  (0x01 << 8)    /* prevent timeout                   */

/* Magic constants */
#define ESB_UNLOCK1     0x80            /* Step 1 to unlock reset registers  */
#define ESB_UNLOCK2     0x86            /* Step 2 to unlock reset registers  */

/* internal variables */
static void __iomem *BASEADDR;
static DEFINE_SPINLOCK(esb_lock); /* Guards the hardware */
static unsigned long timer_alive;
static struct pci_dev *esb_pci;
static unsigned short triggered; /* The status of the watchdog upon boot */
static char esb_expect_close;
static struct platform_device *esb_platform_device;

/* module parameters */
/* 30 sec default heartbeat (1 < heartbeat < 2*1023) */
#define WATCHDOG_HEARTBEAT 30
static int heartbeat = WATCHDOG_HEARTBEAT;  /* in seconds */
module_param(heartbeat, int, 0);
MODULE_PARM_DESC(heartbeat,
                "Watchdog heartbeat in seconds. (1<heartbeat<2046, default="
                                __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");

static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout,
                "Watchdog cannot be stopped once started (default="
                                __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");

/*
 * Some i6300ESB specific functions
 */

/*
 * Prepare for reloading the timer by unlocking the proper registers.
 * This is performed by first writing 0x80 followed by 0x86 to the
 * reload register. After this the appropriate registers can be written
 * to once before they need to be unlocked again.
 */
static inline void esb_unlock_registers(void)
{
        writeb(ESB_UNLOCK1, ESB_RELOAD_REG);
        writeb(ESB_UNLOCK2, ESB_RELOAD_REG);
}

static int esb_timer_start(void)
{
        u8 val;

        spin_lock(&esb_lock);
        esb_unlock_registers();
        writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
        /* Enable or Enable + Lock? */
        val = ESB_WDT_ENABLE | (nowayout ? ESB_WDT_LOCK : 0x00);
        pci_write_config_byte(esb_pci, ESB_LOCK_REG, val);
        spin_unlock(&esb_lock);
        return 0;
}

static int esb_timer_stop(void)
{
        u8 val;

        spin_lock(&esb_lock);
        /* First, reset timers as suggested by the docs */
        esb_unlock_registers();
        writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
        /* Then disable the WDT */
        pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x0);
        pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val);
        spin_unlock(&esb_lock);

        /* Returns 0 if the timer was disabled, non-zero otherwise */
        return val & ESB_WDT_ENABLE;
}

static void esb_timer_keepalive(void)
{
        spin_lock(&esb_lock);
        esb_unlock_registers();
        writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);
        /* FIXME: Do we need to flush anything here? */
        spin_unlock(&esb_lock);
}

static int esb_timer_set_heartbeat(int time)
{
        u32 val;

        if (time < 0x1 || time > (2 * 0x03ff))
                return -EINVAL;

        spin_lock(&esb_lock);

        /* We shift by 9, so if we are passed a value of 1 sec,
         * val will be 1 << 9 = 512, then write that to two
         * timers => 2 * 512 = 1024 (which is decremented at 1KHz)
         */
        val = time << 9;

        /* Write timer 1 */
        esb_unlock_registers();
        writel(val, ESB_TIMER1_REG);

        /* Write timer 2 */
        esb_unlock_registers();
        writel(val, ESB_TIMER2_REG);

        /* Reload */
        esb_unlock_registers();
        writew(ESB_WDT_RELOAD, ESB_RELOAD_REG);

        /* FIXME: Do we need to flush everything out? */

        /* Done */
        heartbeat = time;
        spin_unlock(&esb_lock);
        return 0;
}

/*
 *      /dev/watchdog handling
 */

static int esb_open(struct inode *inode, struct file *file)
{
        /* /dev/watchdog can only be opened once */
        if (test_and_set_bit(0, &timer_alive))
                return -EBUSY;

        /* Reload and activate timer */
        esb_timer_start();

        return nonseekable_open(inode, file);
}

static int esb_release(struct inode *inode, struct file *file)
{
        /* Shut off the timer. */
        if (esb_expect_close == 42)
                esb_timer_stop();
        else {
                printk(KERN_CRIT PFX
                                "Unexpected close, not stopping watchdog!\n");
                esb_timer_keepalive();
        }
        clear_bit(0, &timer_alive);
        esb_expect_close = 0;
        return 0;
}

static ssize_t esb_write(struct file *file, const char __user *data,
                          size_t len, loff_t *ppos)
{
        /* See if we got the magic character 'V' and reload the timer */
        if (len) {
                if (!nowayout) {
                        size_t i;

                        /* note: just in case someone wrote the magic character
                         * five months ago... */
                        esb_expect_close = 0;

                        /* scan to see whether or not we got the
                         * magic character */
                        for (i = 0; i != len; i++) {
                                char c;
                                if (get_user(c, data + i))
                                        return -EFAULT;
                                if (c == 'V')
                                        esb_expect_close = 42;
                        }
                }

                /* someone wrote to us, we should reload the timer */
                esb_timer_keepalive();
        }
        return len;
}

static long esb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
        int new_options, retval = -EINVAL;
        int new_heartbeat;
        void __user *argp = (void __user *)arg;
        int __user *p = argp;
        static struct watchdog_info ident = {
                .options =              WDIOF_SETTIMEOUT |
                                        WDIOF_KEEPALIVEPING |
                                        WDIOF_MAGICCLOSE,
                .firmware_version =     0,
                .identity =             ESB_MODULE_NAME,
        };

        switch (cmd) {
        case WDIOC_GETSUPPORT:
                return copy_to_user(argp, &ident,
                                        sizeof(ident)) ? -EFAULT : 0;

        case WDIOC_GETSTATUS:
                return put_user(0, p);

        case WDIOC_GETBOOTSTATUS:
                return put_user(triggered, p);

        case WDIOC_SETOPTIONS:
        {
                if (get_user(new_options, p))
                        return -EFAULT;

                if (new_options & WDIOS_DISABLECARD) {
                        esb_timer_stop();
                        retval = 0;
                }

                if (new_options & WDIOS_ENABLECARD) {
                        esb_timer_start();
                        retval = 0;
                }
                return retval;
        }
        case WDIOC_KEEPALIVE:
                esb_timer_keepalive();
                return 0;

        case WDIOC_SETTIMEOUT:
        {
                if (get_user(new_heartbeat, p))
                        return -EFAULT;
                if (esb_timer_set_heartbeat(new_heartbeat))
                        return -EINVAL;
                esb_timer_keepalive();
                /* Fall */
        }
        case WDIOC_GETTIMEOUT:
                return put_user(heartbeat, p);
        default:
                return -ENOTTY;
        }
}

/*
 *      Kernel Interfaces
 */

static const struct file_operations esb_fops = {
        .owner = THIS_MODULE,
        .llseek = no_llseek,
        .write = esb_write,
        .unlocked_ioctl = esb_ioctl,
        .open = esb_open,
        .release = esb_release,
};

static struct miscdevice esb_miscdev = {
        .minor = WATCHDOG_MINOR,
        .name = "watchdog",
        .fops = &esb_fops,
};

/*
 * Data for PCI driver interface
 *
 * This data only exists for exporting the supported
 * PCI ids via MODULE_DEVICE_TABLE.  We do not actually
 * register a pci_driver, because someone else might one day
 * want to register another driver on the same PCI id.
 */
static struct pci_device_id esb_pci_tbl[] = {
        { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_9), },
        { 0, },                 /* End of list */
};
MODULE_DEVICE_TABLE(pci, esb_pci_tbl);

/*
 *      Init & exit routines
 */

static unsigned char __devinit esb_getdevice(void)
{
        /*
         *      Find the PCI device
         */

        esb_pci = pci_get_device(PCI_VENDOR_ID_INTEL,
                                        PCI_DEVICE_ID_INTEL_ESB_9, NULL);

        if (!esb_pci)
                return 0;

        if (pci_enable_device(esb_pci)) {
                printk(KERN_ERR PFX "failed to enable device\n");
                goto err_devput;
        }

        if (pci_request_region(esb_pci, 0, ESB_MODULE_NAME)) {
                printk(KERN_ERR PFX "failed to request region\n");
                goto err_disable;
        }

        BASEADDR = pci_ioremap_bar(esb_pci, 0);
        if (BASEADDR == NULL) {
                /* Something's wrong here, BASEADDR has to be set */
                printk(KERN_ERR PFX "failed to get BASEADDR\n");
                goto err_release;
        }

        /* Done */
        return 1;

err_release:
        pci_release_region(esb_pci, 0);
err_disable:
        pci_disable_device(esb_pci);
err_devput:
        pci_dev_put(esb_pci);
        return 0;
}

static void __devinit esb_initdevice(void)
{
        u8 val1;
        u16 val2;

        /*
         * Config register:
         * Bit    5 : 0 = Enable WDT_OUTPUT
         * Bit    2 : 0 = set the timer frequency to the PCI clock
         * divided by 2^15 (approx 1KHz).
         * Bits 1:0 : 11 = WDT_INT_TYPE Disabled.
         * The watchdog has two timers, it can be setup so that the
         * expiry of timer1 results in an interrupt and the expiry of
         * timer2 results in a reboot. We set it to not generate
         * any interrupts as there is not much we can do with it
         * right now.
         */
        pci_write_config_word(esb_pci, ESB_CONFIG_REG, 0x0003);

        /* Check that the WDT isn't already locked */
        pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val1);
        if (val1 & ESB_WDT_LOCK)
                printk(KERN_WARNING PFX "nowayout already set\n");

        /* Set the timer to watchdog mode and disable it for now */
        pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x00);

        /* Check if the watchdog was previously triggered */
        esb_unlock_registers();
        val2 = readw(ESB_RELOAD_REG);
        if (val2 & ESB_WDT_TIMEOUT)
                triggered = WDIOF_CARDRESET;

        /* Reset WDT_TIMEOUT flag and timers */
        esb_unlock_registers();
        writew((ESB_WDT_TIMEOUT | ESB_WDT_RELOAD), ESB_RELOAD_REG);

        /* And set the correct timeout value */
        esb_timer_set_heartbeat(heartbeat);
}

static int __devinit esb_probe(struct platform_device *dev)
{
        int ret;

        /* Check whether or not the hardware watchdog is there */
        if (!esb_getdevice() || esb_pci == NULL)
                return -ENODEV;

        /* Check that the heartbeat value is within it's range;
           if not reset to the default */
        if (heartbeat < 0x1 || heartbeat > 2 * 0x03ff) {
                heartbeat = WATCHDOG_HEARTBEAT;
                printk(KERN_INFO PFX
                        "heartbeat value must be 1<heartbeat<2046, using %d\n",
                                                                heartbeat);
        }

        /* Initialize the watchdog and make sure it does not run */
        esb_initdevice();

        /* Register the watchdog so that userspace has access to it */
        ret = misc_register(&esb_miscdev);
        if (ret != 0) {
                printk(KERN_ERR PFX
                        "cannot register miscdev on minor=%d (err=%d)\n",
                                                        WATCHDOG_MINOR, ret);
                goto err_unmap;
        }
        printk(KERN_INFO PFX
                "initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n",
                                                BASEADDR, heartbeat, nowayout);
        return 0;

err_unmap:
        iounmap(BASEADDR);
        pci_release_region(esb_pci, 0);
        pci_disable_device(esb_pci);
        pci_dev_put(esb_pci);
        return ret;
}

static int __devexit esb_remove(struct platform_device *dev)
{
        /* Stop the timer before we leave */
        if (!nowayout)
                esb_timer_stop();

        /* Deregister */
        misc_deregister(&esb_miscdev);
        iounmap(BASEADDR);
        pci_release_region(esb_pci, 0);
        pci_disable_device(esb_pci);
        pci_dev_put(esb_pci);
        return 0;
}

static void esb_shutdown(struct platform_device *dev)
{
        esb_timer_stop();
}

static struct platform_driver esb_platform_driver = {
        .probe          = esb_probe,
        .remove         = __devexit_p(esb_remove),
        .shutdown       = esb_shutdown,
        .driver         = {
                .owner  = THIS_MODULE,
                .name   = ESB_MODULE_NAME,
        },
};

static int __init watchdog_init(void)
{
        int err;

        printk(KERN_INFO PFX "Intel 6300ESB WatchDog Timer Driver v%s\n",
                ESB_VERSION);

        err = platform_driver_register(&esb_platform_driver);
        if (err)
                return err;

        esb_platform_device = platform_device_register_simple(ESB_MODULE_NAME,
                                                                -1, NULL, 0);
        if (IS_ERR(esb_platform_device)) {
                err = PTR_ERR(esb_platform_device);
                goto unreg_platform_driver;
        }

        return 0;

unreg_platform_driver:
        platform_driver_unregister(&esb_platform_driver);
        return err;
}

static void __exit watchdog_cleanup(void)
{
        platform_device_unregister(esb_platform_device);
        platform_driver_unregister(&esb_platform_driver);
        printk(KERN_INFO PFX "Watchdog Module Unloaded.\n");
}

module_init(watchdog_init);
module_exit(watchdog_cleanup);

MODULE_AUTHOR("Ross Biro and David H\xC3\xA4rdeman");
MODULE_DESCRIPTION("Watchdog driver for Intel 6300ESB chipsets");
MODULE_LICENSE("GPL");
MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);