linux/drivers/isdn/hysdn/ince1pc.h
<<
>>
Prefs
   1/*
   2 * Linux driver for HYSDN cards
   3 * common definitions for both sides of the bus:
   4 * - conventions both spoolers must know
   5 * - channel numbers agreed upon
   6 *
   7 * Author    M. Steinkopf
   8 * Copyright 1999 by M. Steinkopf
   9 *
  10 * This software may be used and distributed according to the terms
  11 * of the GNU General Public License, incorporated herein by reference.
  12 *
  13 */
  14
  15#ifndef __INCE1PC_H__
  16#define __INCE1PC_H__
  17
  18/*  basic scalar definitions have same meanning,
  19 *  but their declaration location depends on environment
  20 */ 
  21
  22/*--------------------------------------channel numbers---------------------*/ 
  23#define CHAN_SYSTEM     0x0001      /* system channel (spooler to spooler) */
  24#define CHAN_ERRLOG     0x0005      /* error logger */
  25#define CHAN_CAPI       0x0064      /* CAPI interface */
  26#define CHAN_NDIS_DATA  0x1001      /* NDIS data transfer */
  27
  28/*--------------------------------------POF ready msg-----------------------*/ 
  29            /* NOTE: after booting POF sends system ready message to PC: */ 
  30#define RDY_MAGIC       0x52535953UL    /* 'SYSR' reversed */
  31#define RDY_MAGIC_SIZE  4               /* size in bytes */
  32
  33#define MAX_N_TOK_BYTES 255
  34
  35#define MIN_RDY_MSG_SIZE    RDY_MAGIC_SIZE
  36#define MAX_RDY_MSG_SIZE    (RDY_MAGIC_SIZE+MAX_N_TOK_BYTES)
  37
  38#define SYSR_TOK_END            0
  39#define SYSR_TOK_B_CHAN         1   /* nr. of B-Channels;   DataLen=1; def: 2 */
  40#define SYSR_TOK_FAX_CHAN       2   /* nr. of FAX Channels; DataLen=1; def: 0 */
  41#define SYSR_TOK_MAC_ADDR       3   /* MAC-Address; DataLen=6; def: auto */
  42#define SYSR_TOK_ESC            255 /* undefined data size yet */
  43                            /* default values, if not corrected by token: */ 
  44#define SYSR_TOK_B_CHAN_DEF     2   /* assume 2 B-Channels */
  45#define SYSR_TOK_FAX_CHAN_DEF   1   /* assume 1 FAX Channel */
  46
  47/*  syntax of new SYSR token stream:
  48 *  channel: CHAN_SYSTEM
  49 *  msgsize: MIN_RDY_MSG_SIZE <= x <= MAX_RDY_MSG_SIZE
  50 *           RDY_MAGIC_SIZE   <= x <= (RDY_MAGIC_SIZE+MAX_N_TOK_BYTES)
  51 *  msg    : 0 1 2 3 {4 5 6 ..}
  52 *           S Y S R  MAX_N_TOK_BYTES bytes of TokenStream
  53 *
  54 *  TokenStream     :=   empty
  55 *                     | {NonEndTokenChunk} EndToken RotlCRC
  56 *  NonEndTokenChunk:= NonEndTokenId DataLen [Data]
  57 *  NonEndTokenId   := 0x01 .. 0xFE                 1 BYTE
  58 *  DataLen         := 0x00 .. 0xFF                 1 BYTE
  59 *  Data            := DataLen bytes
  60 *  EndToken        := 0x00
  61 *  RotlCRC         := special 1 byte CRC over all NonEndTokenChunk bytes
  62 *                     s. RotlCRC algorithm
  63 *
  64 *  RotlCRC algorithm:
  65 *      ucSum= 0                        1 unsigned char
  66 *      for all NonEndTokenChunk bytes:
  67 *          ROTL(ucSum,1)               rotate left by 1
  68 *          ucSum += Char;              add current byte with swap around
  69 *      RotlCRC= ~ucSum;                invert all bits for result
  70 *
  71 *  note:
  72 *  - for 16-bit FIFO add padding 0 byte to achieve even token data bytes!
  73 */ 
  74
  75/*--------------------------------------error logger------------------------*/ 
  76                                            /* note: pof needs final 0 ! */ 
  77#define ERRLOG_CMD_REQ          "ERRLOG ON"
  78#define ERRLOG_CMD_REQ_SIZE     10              /* with final 0 byte ! */
  79#define ERRLOG_CMD_STOP         "ERRLOG OFF"
  80#define ERRLOG_CMD_STOP_SIZE    11              /* with final 0 byte ! */
  81
  82#define ERRLOG_ENTRY_SIZE       64      /* sizeof(tErrLogEntry) */
  83                                        /* remaining text size = 55 */ 
  84#define ERRLOG_TEXT_SIZE    (ERRLOG_ENTRY_SIZE-2*4-1)
  85
  86typedef struct ErrLogEntry_tag {
  87        
  88/*00 */ unsigned long ulErrType;
  89        
  90/*04 */ unsigned long ulErrSubtype;
  91        
  92/*08 */ unsigned char ucTextSize;
  93        
  94        /*09 */ unsigned char ucText[ERRLOG_TEXT_SIZE];
  95        /* ASCIIZ of len ucTextSize-1 */
  96        
  97/*40 */ 
  98} tErrLogEntry;
  99
 100
 101#if defined(__TURBOC__)
 102#if sizeof(tErrLogEntry) != ERRLOG_ENTRY_SIZE
 103#error size of tErrLogEntry != ERRLOG_ENTRY_SIZE
 104#endif                          /*  */
 105#endif                          /*  */
 106
 107/*--------------------------------------DPRAM boot spooler------------------*/ 
 108                                /*  this is the struture used between pc and
 109                                 *  hyperstone to exchange boot data
 110                                 */ 
 111#define DPRAM_SPOOLER_DATA_SIZE 0x20
 112typedef struct DpramBootSpooler_tag {
 113        
 114/*00 */ unsigned char Len;
 115        
 116/*01 */ volatile unsigned char RdPtr;
 117        
 118/*02 */ unsigned char WrPtr;
 119        
 120/*03 */ unsigned char Data[DPRAM_SPOOLER_DATA_SIZE];
 121        
 122/*23 */ 
 123} tDpramBootSpooler;
 124
 125
 126#define DPRAM_SPOOLER_MIN_SIZE  5       /* Len+RdPtr+Wrptr+2*data */
 127#define DPRAM_SPOOLER_DEF_SIZE  0x23    /* current default size   */
 128
 129/*--------------------------------------HYCARD/ERGO DPRAM SoftUart----------*/ 
 130                                    /* at DPRAM offset 0x1C00: */ 
 131#define SIZE_RSV_SOFT_UART  0x1B0   /* 432 bytes reserved for SoftUart */
 132
 133
 134#endif  /* __INCE1PC_H__ */
 135