linux/arch/arm/mach-at91/at91sam9261_devices.c
<<
>>
Prefs
   1/*
   2 * arch/arm/mach-at91/at91sam9261_devices.c
   3 *
   4 *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
   5 *  Copyright (C) 2005 David Brownell
   6 *
   7 * This program is free software; you can redistribute it and/or modify
   8 * it under the terms of the GNU General Public License as published by
   9 * the Free Software Foundation; either version 2 of the License, or
  10 * (at your option) any later version.
  11 *
  12 */
  13#include <asm/mach/arch.h>
  14#include <asm/mach/map.h>
  15
  16#include <linux/dma-mapping.h>
  17#include <linux/platform_device.h>
  18#include <linux/i2c-gpio.h>
  19
  20#include <linux/fb.h>
  21#include <video/atmel_lcdc.h>
  22
  23#include <mach/board.h>
  24#include <mach/gpio.h>
  25#include <mach/at91sam9261.h>
  26#include <mach/at91sam9261_matrix.h>
  27#include <mach/at91sam9_smc.h>
  28
  29#include "generic.h"
  30
  31
  32/* --------------------------------------------------------------------
  33 *  USB Host
  34 * -------------------------------------------------------------------- */
  35
  36#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
  37static u64 ohci_dmamask = DMA_BIT_MASK(32);
  38static struct at91_usbh_data usbh_data;
  39
  40static struct resource usbh_resources[] = {
  41        [0] = {
  42                .start  = AT91SAM9261_UHP_BASE,
  43                .end    = AT91SAM9261_UHP_BASE + SZ_1M - 1,
  44                .flags  = IORESOURCE_MEM,
  45        },
  46        [1] = {
  47                .start  = AT91SAM9261_ID_UHP,
  48                .end    = AT91SAM9261_ID_UHP,
  49                .flags  = IORESOURCE_IRQ,
  50        },
  51};
  52
  53static struct platform_device at91sam9261_usbh_device = {
  54        .name           = "at91_ohci",
  55        .id             = -1,
  56        .dev            = {
  57                                .dma_mask               = &ohci_dmamask,
  58                                .coherent_dma_mask      = DMA_BIT_MASK(32),
  59                                .platform_data          = &usbh_data,
  60        },
  61        .resource       = usbh_resources,
  62        .num_resources  = ARRAY_SIZE(usbh_resources),
  63};
  64
  65void __init at91_add_device_usbh(struct at91_usbh_data *data)
  66{
  67        if (!data)
  68                return;
  69
  70        usbh_data = *data;
  71        platform_device_register(&at91sam9261_usbh_device);
  72}
  73#else
  74void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  75#endif
  76
  77
  78/* --------------------------------------------------------------------
  79 *  USB Device (Gadget)
  80 * -------------------------------------------------------------------- */
  81
  82#ifdef CONFIG_USB_GADGET_AT91
  83static struct at91_udc_data udc_data;
  84
  85static struct resource udc_resources[] = {
  86        [0] = {
  87                .start  = AT91SAM9261_BASE_UDP,
  88                .end    = AT91SAM9261_BASE_UDP + SZ_16K - 1,
  89                .flags  = IORESOURCE_MEM,
  90        },
  91        [1] = {
  92                .start  = AT91SAM9261_ID_UDP,
  93                .end    = AT91SAM9261_ID_UDP,
  94                .flags  = IORESOURCE_IRQ,
  95        },
  96};
  97
  98static struct platform_device at91sam9261_udc_device = {
  99        .name           = "at91_udc",
 100        .id             = -1,
 101        .dev            = {
 102                                .platform_data          = &udc_data,
 103        },
 104        .resource       = udc_resources,
 105        .num_resources  = ARRAY_SIZE(udc_resources),
 106};
 107
 108void __init at91_add_device_udc(struct at91_udc_data *data)
 109{
 110        if (!data)
 111                return;
 112
 113        if (data->vbus_pin) {
 114                at91_set_gpio_input(data->vbus_pin, 0);
 115                at91_set_deglitch(data->vbus_pin, 1);
 116        }
 117
 118        /* Pullup pin is handled internally by USB device peripheral */
 119
 120        udc_data = *data;
 121        platform_device_register(&at91sam9261_udc_device);
 122}
 123#else
 124void __init at91_add_device_udc(struct at91_udc_data *data) {}
 125#endif
 126
 127/* --------------------------------------------------------------------
 128 *  MMC / SD
 129 * -------------------------------------------------------------------- */
 130
 131#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
 132static u64 mmc_dmamask = DMA_BIT_MASK(32);
 133static struct at91_mmc_data mmc_data;
 134
 135static struct resource mmc_resources[] = {
 136        [0] = {
 137                .start  = AT91SAM9261_BASE_MCI,
 138                .end    = AT91SAM9261_BASE_MCI + SZ_16K - 1,
 139                .flags  = IORESOURCE_MEM,
 140        },
 141        [1] = {
 142                .start  = AT91SAM9261_ID_MCI,
 143                .end    = AT91SAM9261_ID_MCI,
 144                .flags  = IORESOURCE_IRQ,
 145        },
 146};
 147
 148static struct platform_device at91sam9261_mmc_device = {
 149        .name           = "at91_mci",
 150        .id             = -1,
 151        .dev            = {
 152                                .dma_mask               = &mmc_dmamask,
 153                                .coherent_dma_mask      = DMA_BIT_MASK(32),
 154                                .platform_data          = &mmc_data,
 155        },
 156        .resource       = mmc_resources,
 157        .num_resources  = ARRAY_SIZE(mmc_resources),
 158};
 159
 160void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 161{
 162        if (!data)
 163                return;
 164
 165        /* input/irq */
 166        if (data->det_pin) {
 167                at91_set_gpio_input(data->det_pin, 1);
 168                at91_set_deglitch(data->det_pin, 1);
 169        }
 170        if (data->wp_pin)
 171                at91_set_gpio_input(data->wp_pin, 1);
 172        if (data->vcc_pin)
 173                at91_set_gpio_output(data->vcc_pin, 0);
 174
 175        /* CLK */
 176        at91_set_B_periph(AT91_PIN_PA2, 0);
 177
 178        /* CMD */
 179        at91_set_B_periph(AT91_PIN_PA1, 1);
 180
 181        /* DAT0, maybe DAT1..DAT3 */
 182        at91_set_B_periph(AT91_PIN_PA0, 1);
 183        if (data->wire4) {
 184                at91_set_B_periph(AT91_PIN_PA4, 1);
 185                at91_set_B_periph(AT91_PIN_PA5, 1);
 186                at91_set_B_periph(AT91_PIN_PA6, 1);
 187        }
 188
 189        mmc_data = *data;
 190        platform_device_register(&at91sam9261_mmc_device);
 191}
 192#else
 193void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 194#endif
 195
 196
 197/* --------------------------------------------------------------------
 198 *  NAND / SmartMedia
 199 * -------------------------------------------------------------------- */
 200
 201#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
 202static struct atmel_nand_data nand_data;
 203
 204#define NAND_BASE       AT91_CHIPSELECT_3
 205
 206static struct resource nand_resources[] = {
 207        {
 208                .start  = NAND_BASE,
 209                .end    = NAND_BASE + SZ_256M - 1,
 210                .flags  = IORESOURCE_MEM,
 211        }
 212};
 213
 214static struct platform_device atmel_nand_device = {
 215        .name           = "atmel_nand",
 216        .id             = -1,
 217        .dev            = {
 218                                .platform_data  = &nand_data,
 219        },
 220        .resource       = nand_resources,
 221        .num_resources  = ARRAY_SIZE(nand_resources),
 222};
 223
 224void __init at91_add_device_nand(struct atmel_nand_data *data)
 225{
 226        unsigned long csa, mode;
 227
 228        if (!data)
 229                return;
 230
 231        csa = at91_sys_read(AT91_MATRIX_EBICSA);
 232        at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 233
 234        /* set the bus interface characteristics */
 235        at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0)
 236                        | AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
 237
 238        at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
 239                        | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
 240
 241        at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
 242
 243        if (data->bus_width_16)
 244                mode = AT91_SMC_DBW_16;
 245        else
 246                mode = AT91_SMC_DBW_8;
 247        at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
 248
 249        /* enable pin */
 250        if (data->enable_pin)
 251                at91_set_gpio_output(data->enable_pin, 1);
 252
 253        /* ready/busy pin */
 254        if (data->rdy_pin)
 255                at91_set_gpio_input(data->rdy_pin, 1);
 256
 257        /* card detect pin */
 258        if (data->det_pin)
 259                at91_set_gpio_input(data->det_pin, 1);
 260
 261        at91_set_A_periph(AT91_PIN_PC0, 0);             /* NANDOE */
 262        at91_set_A_periph(AT91_PIN_PC1, 0);             /* NANDWE */
 263
 264        nand_data = *data;
 265        platform_device_register(&atmel_nand_device);
 266}
 267
 268#else
 269void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 270#endif
 271
 272
 273/* --------------------------------------------------------------------
 274 *  TWI (i2c)
 275 * -------------------------------------------------------------------- */
 276
 277/*
 278 * Prefer the GPIO code since the TWI controller isn't robust
 279 * (gets overruns and underruns under load) and can only issue
 280 * repeated STARTs in one scenario (the driver doesn't yet handle them).
 281 */
 282#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
 283
 284static struct i2c_gpio_platform_data pdata = {
 285        .sda_pin                = AT91_PIN_PA7,
 286        .sda_is_open_drain      = 1,
 287        .scl_pin                = AT91_PIN_PA8,
 288        .scl_is_open_drain      = 1,
 289        .udelay                 = 2,            /* ~100 kHz */
 290};
 291
 292static struct platform_device at91sam9261_twi_device = {
 293        .name                   = "i2c-gpio",
 294        .id                     = -1,
 295        .dev.platform_data      = &pdata,
 296};
 297
 298void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
 299{
 300        at91_set_GPIO_periph(AT91_PIN_PA7, 1);          /* TWD (SDA) */
 301        at91_set_multi_drive(AT91_PIN_PA7, 1);
 302
 303        at91_set_GPIO_periph(AT91_PIN_PA8, 1);          /* TWCK (SCL) */
 304        at91_set_multi_drive(AT91_PIN_PA8, 1);
 305
 306        i2c_register_board_info(0, devices, nr_devices);
 307        platform_device_register(&at91sam9261_twi_device);
 308}
 309
 310#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
 311
 312static struct resource twi_resources[] = {
 313        [0] = {
 314                .start  = AT91SAM9261_BASE_TWI,
 315                .end    = AT91SAM9261_BASE_TWI + SZ_16K - 1,
 316                .flags  = IORESOURCE_MEM,
 317        },
 318        [1] = {
 319                .start  = AT91SAM9261_ID_TWI,
 320                .end    = AT91SAM9261_ID_TWI,
 321                .flags  = IORESOURCE_IRQ,
 322        },
 323};
 324
 325static struct platform_device at91sam9261_twi_device = {
 326        .name           = "at91_i2c",
 327        .id             = -1,
 328        .resource       = twi_resources,
 329        .num_resources  = ARRAY_SIZE(twi_resources),
 330};
 331
 332void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
 333{
 334        /* pins used for TWI interface */
 335        at91_set_A_periph(AT91_PIN_PA7, 0);             /* TWD */
 336        at91_set_multi_drive(AT91_PIN_PA7, 1);
 337
 338        at91_set_A_periph(AT91_PIN_PA8, 0);             /* TWCK */
 339        at91_set_multi_drive(AT91_PIN_PA8, 1);
 340
 341        i2c_register_board_info(0, devices, nr_devices);
 342        platform_device_register(&at91sam9261_twi_device);
 343}
 344#else
 345void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
 346#endif
 347
 348
 349/* --------------------------------------------------------------------
 350 *  SPI
 351 * -------------------------------------------------------------------- */
 352
 353#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
 354static u64 spi_dmamask = DMA_BIT_MASK(32);
 355
 356static struct resource spi0_resources[] = {
 357        [0] = {
 358                .start  = AT91SAM9261_BASE_SPI0,
 359                .end    = AT91SAM9261_BASE_SPI0 + SZ_16K - 1,
 360                .flags  = IORESOURCE_MEM,
 361        },
 362        [1] = {
 363                .start  = AT91SAM9261_ID_SPI0,
 364                .end    = AT91SAM9261_ID_SPI0,
 365                .flags  = IORESOURCE_IRQ,
 366        },
 367};
 368
 369static struct platform_device at91sam9261_spi0_device = {
 370        .name           = "atmel_spi",
 371        .id             = 0,
 372        .dev            = {
 373                                .dma_mask               = &spi_dmamask,
 374                                .coherent_dma_mask      = DMA_BIT_MASK(32),
 375        },
 376        .resource       = spi0_resources,
 377        .num_resources  = ARRAY_SIZE(spi0_resources),
 378};
 379
 380static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
 381
 382static struct resource spi1_resources[] = {
 383        [0] = {
 384                .start  = AT91SAM9261_BASE_SPI1,
 385                .end    = AT91SAM9261_BASE_SPI1 + SZ_16K - 1,
 386                .flags  = IORESOURCE_MEM,
 387        },
 388        [1] = {
 389                .start  = AT91SAM9261_ID_SPI1,
 390                .end    = AT91SAM9261_ID_SPI1,
 391                .flags  = IORESOURCE_IRQ,
 392        },
 393};
 394
 395static struct platform_device at91sam9261_spi1_device = {
 396        .name           = "atmel_spi",
 397        .id             = 1,
 398        .dev            = {
 399                                .dma_mask               = &spi_dmamask,
 400                                .coherent_dma_mask      = DMA_BIT_MASK(32),
 401        },
 402        .resource       = spi1_resources,
 403        .num_resources  = ARRAY_SIZE(spi1_resources),
 404};
 405
 406static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB28, AT91_PIN_PA24, AT91_PIN_PA25, AT91_PIN_PA26 };
 407
 408void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 409{
 410        int i;
 411        unsigned long cs_pin;
 412        short enable_spi0 = 0;
 413        short enable_spi1 = 0;
 414
 415        /* Choose SPI chip-selects */
 416        for (i = 0; i < nr_devices; i++) {
 417                if (devices[i].controller_data)
 418                        cs_pin = (unsigned long) devices[i].controller_data;
 419                else if (devices[i].bus_num == 0)
 420                        cs_pin = spi0_standard_cs[devices[i].chip_select];
 421                else
 422                        cs_pin = spi1_standard_cs[devices[i].chip_select];
 423
 424                if (devices[i].bus_num == 0)
 425                        enable_spi0 = 1;
 426                else
 427                        enable_spi1 = 1;
 428
 429                /* enable chip-select pin */
 430                at91_set_gpio_output(cs_pin, 1);
 431
 432                /* pass chip-select pin to driver */
 433                devices[i].controller_data = (void *) cs_pin;
 434        }
 435
 436        spi_register_board_info(devices, nr_devices);
 437
 438        /* Configure SPI bus(es) */
 439        if (enable_spi0) {
 440                at91_set_A_periph(AT91_PIN_PA0, 0);     /* SPI0_MISO */
 441                at91_set_A_periph(AT91_PIN_PA1, 0);     /* SPI0_MOSI */
 442                at91_set_A_periph(AT91_PIN_PA2, 0);     /* SPI0_SPCK */
 443
 444                at91_clock_associate("spi0_clk", &at91sam9261_spi0_device.dev, "spi_clk");
 445                platform_device_register(&at91sam9261_spi0_device);
 446        }
 447        if (enable_spi1) {
 448                at91_set_A_periph(AT91_PIN_PB30, 0);    /* SPI1_MISO */
 449                at91_set_A_periph(AT91_PIN_PB31, 0);    /* SPI1_MOSI */
 450                at91_set_A_periph(AT91_PIN_PB29, 0);    /* SPI1_SPCK */
 451
 452                at91_clock_associate("spi1_clk", &at91sam9261_spi1_device.dev, "spi_clk");
 453                platform_device_register(&at91sam9261_spi1_device);
 454        }
 455}
 456#else
 457void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
 458#endif
 459
 460
 461/* --------------------------------------------------------------------
 462 *  LCD Controller
 463 * -------------------------------------------------------------------- */
 464
 465#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
 466static u64 lcdc_dmamask = DMA_BIT_MASK(32);
 467static struct atmel_lcdfb_info lcdc_data;
 468
 469static struct resource lcdc_resources[] = {
 470        [0] = {
 471                .start  = AT91SAM9261_LCDC_BASE,
 472                .end    = AT91SAM9261_LCDC_BASE + SZ_4K - 1,
 473                .flags  = IORESOURCE_MEM,
 474        },
 475        [1] = {
 476                .start  = AT91SAM9261_ID_LCDC,
 477                .end    = AT91SAM9261_ID_LCDC,
 478                .flags  = IORESOURCE_IRQ,
 479        },
 480#if defined(CONFIG_FB_INTSRAM)
 481        [2] = {
 482                .start  = AT91SAM9261_SRAM_BASE,
 483                .end    = AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE - 1,
 484                .flags  = IORESOURCE_MEM,
 485        },
 486#endif
 487};
 488
 489static struct platform_device at91_lcdc_device = {
 490        .name           = "atmel_lcdfb",
 491        .id             = 0,
 492        .dev            = {
 493                                .dma_mask               = &lcdc_dmamask,
 494                                .coherent_dma_mask      = DMA_BIT_MASK(32),
 495                                .platform_data          = &lcdc_data,
 496        },
 497        .resource       = lcdc_resources,
 498        .num_resources  = ARRAY_SIZE(lcdc_resources),
 499};
 500
 501void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
 502{
 503        if (!data) {
 504                return;
 505        }
 506
 507#if defined(CONFIG_FB_ATMEL_STN)
 508        at91_set_A_periph(AT91_PIN_PB0, 0);     /* LCDVSYNC */
 509        at91_set_A_periph(AT91_PIN_PB1, 0);     /* LCDHSYNC */
 510        at91_set_A_periph(AT91_PIN_PB2, 0);     /* LCDDOTCK */
 511        at91_set_A_periph(AT91_PIN_PB3, 0);     /* LCDDEN */
 512        at91_set_A_periph(AT91_PIN_PB4, 0);     /* LCDCC */
 513        at91_set_A_periph(AT91_PIN_PB5, 0);     /* LCDD0 */
 514        at91_set_A_periph(AT91_PIN_PB6, 0);     /* LCDD1 */
 515        at91_set_A_periph(AT91_PIN_PB7, 0);     /* LCDD2 */
 516        at91_set_A_periph(AT91_PIN_PB8, 0);     /* LCDD3 */
 517#else
 518        at91_set_A_periph(AT91_PIN_PB1, 0);     /* LCDHSYNC */
 519        at91_set_A_periph(AT91_PIN_PB2, 0);     /* LCDDOTCK */
 520        at91_set_A_periph(AT91_PIN_PB3, 0);     /* LCDDEN */
 521        at91_set_A_periph(AT91_PIN_PB4, 0);     /* LCDCC */
 522        at91_set_A_periph(AT91_PIN_PB7, 0);     /* LCDD2 */
 523        at91_set_A_periph(AT91_PIN_PB8, 0);     /* LCDD3 */
 524        at91_set_A_periph(AT91_PIN_PB9, 0);     /* LCDD4 */
 525        at91_set_A_periph(AT91_PIN_PB10, 0);    /* LCDD5 */
 526        at91_set_A_periph(AT91_PIN_PB11, 0);    /* LCDD6 */
 527        at91_set_A_periph(AT91_PIN_PB12, 0);    /* LCDD7 */
 528        at91_set_A_periph(AT91_PIN_PB15, 0);    /* LCDD10 */
 529        at91_set_A_periph(AT91_PIN_PB16, 0);    /* LCDD11 */
 530        at91_set_A_periph(AT91_PIN_PB17, 0);    /* LCDD12 */
 531        at91_set_A_periph(AT91_PIN_PB18, 0);    /* LCDD13 */
 532        at91_set_A_periph(AT91_PIN_PB19, 0);    /* LCDD14 */
 533        at91_set_A_periph(AT91_PIN_PB20, 0);    /* LCDD15 */
 534        at91_set_B_periph(AT91_PIN_PB23, 0);    /* LCDD18 */
 535        at91_set_B_periph(AT91_PIN_PB24, 0);    /* LCDD19 */
 536        at91_set_B_periph(AT91_PIN_PB25, 0);    /* LCDD20 */
 537        at91_set_B_periph(AT91_PIN_PB26, 0);    /* LCDD21 */
 538        at91_set_B_periph(AT91_PIN_PB27, 0);    /* LCDD22 */
 539        at91_set_B_periph(AT91_PIN_PB28, 0);    /* LCDD23 */
 540#endif
 541
 542        if (ARRAY_SIZE(lcdc_resources) > 2) {
 543                void __iomem *fb;
 544                struct resource *fb_res = &lcdc_resources[2];
 545                size_t fb_len = fb_res->end - fb_res->start + 1;
 546
 547                fb = ioremap(fb_res->start, fb_len);
 548                if (fb) {
 549                        memset(fb, 0, fb_len);
 550                        iounmap(fb);
 551                }
 552        }
 553        lcdc_data = *data;
 554        platform_device_register(&at91_lcdc_device);
 555}
 556#else
 557void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
 558#endif
 559
 560
 561/* --------------------------------------------------------------------
 562 *  Timer/Counter block
 563 * -------------------------------------------------------------------- */
 564
 565#ifdef CONFIG_ATMEL_TCLIB
 566
 567static struct resource tcb_resources[] = {
 568        [0] = {
 569                .start  = AT91SAM9261_BASE_TCB0,
 570                .end    = AT91SAM9261_BASE_TCB0 + SZ_16K - 1,
 571                .flags  = IORESOURCE_MEM,
 572        },
 573        [1] = {
 574                .start  = AT91SAM9261_ID_TC0,
 575                .end    = AT91SAM9261_ID_TC0,
 576                .flags  = IORESOURCE_IRQ,
 577        },
 578        [2] = {
 579                .start  = AT91SAM9261_ID_TC1,
 580                .end    = AT91SAM9261_ID_TC1,
 581                .flags  = IORESOURCE_IRQ,
 582        },
 583        [3] = {
 584                .start  = AT91SAM9261_ID_TC2,
 585                .end    = AT91SAM9261_ID_TC2,
 586                .flags  = IORESOURCE_IRQ,
 587        },
 588};
 589
 590static struct platform_device at91sam9261_tcb_device = {
 591        .name           = "atmel_tcb",
 592        .id             = 0,
 593        .resource       = tcb_resources,
 594        .num_resources  = ARRAY_SIZE(tcb_resources),
 595};
 596
 597static void __init at91_add_device_tc(void)
 598{
 599        /* this chip has a separate clock and irq for each TC channel */
 600        at91_clock_associate("tc0_clk", &at91sam9261_tcb_device.dev, "t0_clk");
 601        at91_clock_associate("tc1_clk", &at91sam9261_tcb_device.dev, "t1_clk");
 602        at91_clock_associate("tc2_clk", &at91sam9261_tcb_device.dev, "t2_clk");
 603        platform_device_register(&at91sam9261_tcb_device);
 604}
 605#else
 606static void __init at91_add_device_tc(void) { }
 607#endif
 608
 609
 610/* --------------------------------------------------------------------
 611 *  RTT
 612 * -------------------------------------------------------------------- */
 613
 614static struct resource rtt_resources[] = {
 615        {
 616                .start  = AT91_BASE_SYS + AT91_RTT,
 617                .end    = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
 618                .flags  = IORESOURCE_MEM,
 619        }
 620};
 621
 622static struct platform_device at91sam9261_rtt_device = {
 623        .name           = "at91_rtt",
 624        .id             = 0,
 625        .resource       = rtt_resources,
 626        .num_resources  = ARRAY_SIZE(rtt_resources),
 627};
 628
 629static void __init at91_add_device_rtt(void)
 630{
 631        platform_device_register(&at91sam9261_rtt_device);
 632}
 633
 634
 635/* --------------------------------------------------------------------
 636 *  Watchdog
 637 * -------------------------------------------------------------------- */
 638
 639#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
 640static struct platform_device at91sam9261_wdt_device = {
 641        .name           = "at91_wdt",
 642        .id             = -1,
 643        .num_resources  = 0,
 644};
 645
 646static void __init at91_add_device_watchdog(void)
 647{
 648        platform_device_register(&at91sam9261_wdt_device);
 649}
 650#else
 651static void __init at91_add_device_watchdog(void) {}
 652#endif
 653
 654
 655/* --------------------------------------------------------------------
 656 *  SSC -- Synchronous Serial Controller
 657 * -------------------------------------------------------------------- */
 658
 659#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
 660static u64 ssc0_dmamask = DMA_BIT_MASK(32);
 661
 662static struct resource ssc0_resources[] = {
 663        [0] = {
 664                .start  = AT91SAM9261_BASE_SSC0,
 665                .end    = AT91SAM9261_BASE_SSC0 + SZ_16K - 1,
 666                .flags  = IORESOURCE_MEM,
 667        },
 668        [1] = {
 669                .start  = AT91SAM9261_ID_SSC0,
 670                .end    = AT91SAM9261_ID_SSC0,
 671                .flags  = IORESOURCE_IRQ,
 672        },
 673};
 674
 675static struct platform_device at91sam9261_ssc0_device = {
 676        .name   = "ssc",
 677        .id     = 0,
 678        .dev    = {
 679                .dma_mask               = &ssc0_dmamask,
 680                .coherent_dma_mask      = DMA_BIT_MASK(32),
 681        },
 682        .resource       = ssc0_resources,
 683        .num_resources  = ARRAY_SIZE(ssc0_resources),
 684};
 685
 686static inline void configure_ssc0_pins(unsigned pins)
 687{
 688        if (pins & ATMEL_SSC_TF)
 689                at91_set_A_periph(AT91_PIN_PB21, 1);
 690        if (pins & ATMEL_SSC_TK)
 691                at91_set_A_periph(AT91_PIN_PB22, 1);
 692        if (pins & ATMEL_SSC_TD)
 693                at91_set_A_periph(AT91_PIN_PB23, 1);
 694        if (pins & ATMEL_SSC_RD)
 695                at91_set_A_periph(AT91_PIN_PB24, 1);
 696        if (pins & ATMEL_SSC_RK)
 697                at91_set_A_periph(AT91_PIN_PB25, 1);
 698        if (pins & ATMEL_SSC_RF)
 699                at91_set_A_periph(AT91_PIN_PB26, 1);
 700}
 701
 702static u64 ssc1_dmamask = DMA_BIT_MASK(32);
 703
 704static struct resource ssc1_resources[] = {
 705        [0] = {
 706                .start  = AT91SAM9261_BASE_SSC1,
 707                .end    = AT91SAM9261_BASE_SSC1 + SZ_16K - 1,
 708                .flags  = IORESOURCE_MEM,
 709        },
 710        [1] = {
 711                .start  = AT91SAM9261_ID_SSC1,
 712                .end    = AT91SAM9261_ID_SSC1,
 713                .flags  = IORESOURCE_IRQ,
 714        },
 715};
 716
 717static struct platform_device at91sam9261_ssc1_device = {
 718        .name   = "ssc",
 719        .id     = 1,
 720        .dev    = {
 721                .dma_mask               = &ssc1_dmamask,
 722                .coherent_dma_mask      = DMA_BIT_MASK(32),
 723        },
 724        .resource       = ssc1_resources,
 725        .num_resources  = ARRAY_SIZE(ssc1_resources),
 726};
 727
 728static inline void configure_ssc1_pins(unsigned pins)
 729{
 730        if (pins & ATMEL_SSC_TF)
 731                at91_set_B_periph(AT91_PIN_PA17, 1);
 732        if (pins & ATMEL_SSC_TK)
 733                at91_set_B_periph(AT91_PIN_PA18, 1);
 734        if (pins & ATMEL_SSC_TD)
 735                at91_set_B_periph(AT91_PIN_PA19, 1);
 736        if (pins & ATMEL_SSC_RD)
 737                at91_set_B_periph(AT91_PIN_PA20, 1);
 738        if (pins & ATMEL_SSC_RK)
 739                at91_set_B_periph(AT91_PIN_PA21, 1);
 740        if (pins & ATMEL_SSC_RF)
 741                at91_set_B_periph(AT91_PIN_PA22, 1);
 742}
 743
 744static u64 ssc2_dmamask = DMA_BIT_MASK(32);
 745
 746static struct resource ssc2_resources[] = {
 747        [0] = {
 748                .start  = AT91SAM9261_BASE_SSC2,
 749                .end    = AT91SAM9261_BASE_SSC2 + SZ_16K - 1,
 750                .flags  = IORESOURCE_MEM,
 751        },
 752        [1] = {
 753                .start  = AT91SAM9261_ID_SSC2,
 754                .end    = AT91SAM9261_ID_SSC2,
 755                .flags  = IORESOURCE_IRQ,
 756        },
 757};
 758
 759static struct platform_device at91sam9261_ssc2_device = {
 760        .name   = "ssc",
 761        .id     = 2,
 762        .dev    = {
 763                .dma_mask               = &ssc2_dmamask,
 764                .coherent_dma_mask      = DMA_BIT_MASK(32),
 765        },
 766        .resource       = ssc2_resources,
 767        .num_resources  = ARRAY_SIZE(ssc2_resources),
 768};
 769
 770static inline void configure_ssc2_pins(unsigned pins)
 771{
 772        if (pins & ATMEL_SSC_TF)
 773                at91_set_B_periph(AT91_PIN_PC25, 1);
 774        if (pins & ATMEL_SSC_TK)
 775                at91_set_B_periph(AT91_PIN_PC26, 1);
 776        if (pins & ATMEL_SSC_TD)
 777                at91_set_B_periph(AT91_PIN_PC27, 1);
 778        if (pins & ATMEL_SSC_RD)
 779                at91_set_B_periph(AT91_PIN_PC28, 1);
 780        if (pins & ATMEL_SSC_RK)
 781                at91_set_B_periph(AT91_PIN_PC29, 1);
 782        if (pins & ATMEL_SSC_RF)
 783                at91_set_B_periph(AT91_PIN_PC30, 1);
 784}
 785
 786/*
 787 * SSC controllers are accessed through library code, instead of any
 788 * kind of all-singing/all-dancing driver.  For example one could be
 789 * used by a particular I2S audio codec's driver, while another one
 790 * on the same system might be used by a custom data capture driver.
 791 */
 792void __init at91_add_device_ssc(unsigned id, unsigned pins)
 793{
 794        struct platform_device *pdev;
 795
 796        /*
 797         * NOTE: caller is responsible for passing information matching
 798         * "pins" to whatever will be using each particular controller.
 799         */
 800        switch (id) {
 801        case AT91SAM9261_ID_SSC0:
 802                pdev = &at91sam9261_ssc0_device;
 803                configure_ssc0_pins(pins);
 804                at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
 805                break;
 806        case AT91SAM9261_ID_SSC1:
 807                pdev = &at91sam9261_ssc1_device;
 808                configure_ssc1_pins(pins);
 809                at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
 810                break;
 811        case AT91SAM9261_ID_SSC2:
 812                pdev = &at91sam9261_ssc2_device;
 813                configure_ssc2_pins(pins);
 814                at91_clock_associate("ssc2_clk", &pdev->dev, "pclk");
 815                break;
 816        default:
 817                return;
 818        }
 819
 820        platform_device_register(pdev);
 821}
 822
 823#else
 824void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
 825#endif
 826
 827
 828/* --------------------------------------------------------------------
 829 *  UART
 830 * -------------------------------------------------------------------- */
 831
 832#if defined(CONFIG_SERIAL_ATMEL)
 833static struct resource dbgu_resources[] = {
 834        [0] = {
 835                .start  = AT91_VA_BASE_SYS + AT91_DBGU,
 836                .end    = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
 837                .flags  = IORESOURCE_MEM,
 838        },
 839        [1] = {
 840                .start  = AT91_ID_SYS,
 841                .end    = AT91_ID_SYS,
 842                .flags  = IORESOURCE_IRQ,
 843        },
 844};
 845
 846static struct atmel_uart_data dbgu_data = {
 847        .use_dma_tx     = 0,
 848        .use_dma_rx     = 0,            /* DBGU not capable of receive DMA */
 849        .regs           = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
 850};
 851
 852static u64 dbgu_dmamask = DMA_BIT_MASK(32);
 853
 854static struct platform_device at91sam9261_dbgu_device = {
 855        .name           = "atmel_usart",
 856        .id             = 0,
 857        .dev            = {
 858                                .dma_mask               = &dbgu_dmamask,
 859                                .coherent_dma_mask      = DMA_BIT_MASK(32),
 860                                .platform_data          = &dbgu_data,
 861        },
 862        .resource       = dbgu_resources,
 863        .num_resources  = ARRAY_SIZE(dbgu_resources),
 864};
 865
 866static inline void configure_dbgu_pins(void)
 867{
 868        at91_set_A_periph(AT91_PIN_PA9, 0);             /* DRXD */
 869        at91_set_A_periph(AT91_PIN_PA10, 1);            /* DTXD */
 870}
 871
 872static struct resource uart0_resources[] = {
 873        [0] = {
 874                .start  = AT91SAM9261_BASE_US0,
 875                .end    = AT91SAM9261_BASE_US0 + SZ_16K - 1,
 876                .flags  = IORESOURCE_MEM,
 877        },
 878        [1] = {
 879                .start  = AT91SAM9261_ID_US0,
 880                .end    = AT91SAM9261_ID_US0,
 881                .flags  = IORESOURCE_IRQ,
 882        },
 883};
 884
 885static struct atmel_uart_data uart0_data = {
 886        .use_dma_tx     = 1,
 887        .use_dma_rx     = 1,
 888};
 889
 890static u64 uart0_dmamask = DMA_BIT_MASK(32);
 891
 892static struct platform_device at91sam9261_uart0_device = {
 893        .name           = "atmel_usart",
 894        .id             = 1,
 895        .dev            = {
 896                                .dma_mask               = &uart0_dmamask,
 897                                .coherent_dma_mask      = DMA_BIT_MASK(32),
 898                                .platform_data          = &uart0_data,
 899        },
 900        .resource       = uart0_resources,
 901        .num_resources  = ARRAY_SIZE(uart0_resources),
 902};
 903
 904static inline void configure_usart0_pins(unsigned pins)
 905{
 906        at91_set_A_periph(AT91_PIN_PC8, 1);             /* TXD0 */
 907        at91_set_A_periph(AT91_PIN_PC9, 0);             /* RXD0 */
 908
 909        if (pins & ATMEL_UART_RTS)
 910                at91_set_A_periph(AT91_PIN_PC10, 0);    /* RTS0 */
 911        if (pins & ATMEL_UART_CTS)
 912                at91_set_A_periph(AT91_PIN_PC11, 0);    /* CTS0 */
 913}
 914
 915static struct resource uart1_resources[] = {
 916        [0] = {
 917                .start  = AT91SAM9261_BASE_US1,
 918                .end    = AT91SAM9261_BASE_US1 + SZ_16K - 1,
 919                .flags  = IORESOURCE_MEM,
 920        },
 921        [1] = {
 922                .start  = AT91SAM9261_ID_US1,
 923                .end    = AT91SAM9261_ID_US1,
 924                .flags  = IORESOURCE_IRQ,
 925        },
 926};
 927
 928static struct atmel_uart_data uart1_data = {
 929        .use_dma_tx     = 1,
 930        .use_dma_rx     = 1,
 931};
 932
 933static u64 uart1_dmamask = DMA_BIT_MASK(32);
 934
 935static struct platform_device at91sam9261_uart1_device = {
 936        .name           = "atmel_usart",
 937        .id             = 2,
 938        .dev            = {
 939                                .dma_mask               = &uart1_dmamask,
 940                                .coherent_dma_mask      = DMA_BIT_MASK(32),
 941                                .platform_data          = &uart1_data,
 942        },
 943        .resource       = uart1_resources,
 944        .num_resources  = ARRAY_SIZE(uart1_resources),
 945};
 946
 947static inline void configure_usart1_pins(unsigned pins)
 948{
 949        at91_set_A_periph(AT91_PIN_PC12, 1);            /* TXD1 */
 950        at91_set_A_periph(AT91_PIN_PC13, 0);            /* RXD1 */
 951
 952        if (pins & ATMEL_UART_RTS)
 953                at91_set_B_periph(AT91_PIN_PA12, 0);    /* RTS1 */
 954        if (pins & ATMEL_UART_CTS)
 955                at91_set_B_periph(AT91_PIN_PA13, 0);    /* CTS1 */
 956}
 957
 958static struct resource uart2_resources[] = {
 959        [0] = {
 960                .start  = AT91SAM9261_BASE_US2,
 961                .end    = AT91SAM9261_BASE_US2 + SZ_16K - 1,
 962                .flags  = IORESOURCE_MEM,
 963        },
 964        [1] = {
 965                .start  = AT91SAM9261_ID_US2,
 966                .end    = AT91SAM9261_ID_US2,
 967                .flags  = IORESOURCE_IRQ,
 968        },
 969};
 970
 971static struct atmel_uart_data uart2_data = {
 972        .use_dma_tx     = 1,
 973        .use_dma_rx     = 1,
 974};
 975
 976static u64 uart2_dmamask = DMA_BIT_MASK(32);
 977
 978static struct platform_device at91sam9261_uart2_device = {
 979        .name           = "atmel_usart",
 980        .id             = 3,
 981        .dev            = {
 982                                .dma_mask               = &uart2_dmamask,
 983                                .coherent_dma_mask      = DMA_BIT_MASK(32),
 984                                .platform_data          = &uart2_data,
 985        },
 986        .resource       = uart2_resources,
 987        .num_resources  = ARRAY_SIZE(uart2_resources),
 988};
 989
 990static inline void configure_usart2_pins(unsigned pins)
 991{
 992        at91_set_A_periph(AT91_PIN_PC15, 0);            /* RXD2 */
 993        at91_set_A_periph(AT91_PIN_PC14, 1);            /* TXD2 */
 994
 995        if (pins & ATMEL_UART_RTS)
 996                at91_set_B_periph(AT91_PIN_PA15, 0);    /* RTS2*/
 997        if (pins & ATMEL_UART_CTS)
 998                at91_set_B_periph(AT91_PIN_PA16, 0);    /* CTS2 */
 999}
1000
1001static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];   /* the UARTs to use */
1002struct platform_device *atmel_default_console_device;   /* the serial console device */
1003
1004void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
1005{
1006        struct platform_device *pdev;
1007
1008        switch (id) {
1009                case 0:         /* DBGU */
1010                        pdev = &at91sam9261_dbgu_device;
1011                        configure_dbgu_pins();
1012                        at91_clock_associate("mck", &pdev->dev, "usart");
1013                        break;
1014                case AT91SAM9261_ID_US0:
1015                        pdev = &at91sam9261_uart0_device;
1016                        configure_usart0_pins(pins);
1017                        at91_clock_associate("usart0_clk", &pdev->dev, "usart");
1018                        break;
1019                case AT91SAM9261_ID_US1:
1020                        pdev = &at91sam9261_uart1_device;
1021                        configure_usart1_pins(pins);
1022                        at91_clock_associate("usart1_clk", &pdev->dev, "usart");
1023                        break;
1024                case AT91SAM9261_ID_US2:
1025                        pdev = &at91sam9261_uart2_device;
1026                        configure_usart2_pins(pins);
1027                        at91_clock_associate("usart2_clk", &pdev->dev, "usart");
1028                        break;
1029                default:
1030                        return;
1031        }
1032        pdev->id = portnr;              /* update to mapped ID */
1033
1034        if (portnr < ATMEL_MAX_UART)
1035                at91_uarts[portnr] = pdev;
1036}
1037
1038void __init at91_set_serial_console(unsigned portnr)
1039{
1040        if (portnr < ATMEL_MAX_UART)
1041                atmel_default_console_device = at91_uarts[portnr];
1042}
1043
1044void __init at91_add_device_serial(void)
1045{
1046        int i;
1047
1048        for (i = 0; i < ATMEL_MAX_UART; i++) {
1049                if (at91_uarts[i])
1050                        platform_device_register(at91_uarts[i]);
1051        }
1052
1053        if (!atmel_default_console_device)
1054                printk(KERN_INFO "AT91: No default serial console defined.\n");
1055}
1056#else
1057void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
1058void __init at91_set_serial_console(unsigned portnr) {}
1059void __init at91_add_device_serial(void) {}
1060#endif
1061
1062
1063/* -------------------------------------------------------------------- */
1064
1065/*
1066 * These devices are always present and don't need any board-specific
1067 * setup.
1068 */
1069static int __init at91_add_standard_devices(void)
1070{
1071        at91_add_device_rtt();
1072        at91_add_device_watchdog();
1073        at91_add_device_tc();
1074        return 0;
1075}
1076
1077arch_initcall(at91_add_standard_devices);
1078