#
# USB Miscellaneous driver configuration
#
comment "USB Miscellaneous drivers"
        depends on USB

config USB_EMI62
        tristate "EMI 6|2m USB Audio interface support"
        depends on USB
        ---help---
          This driver loads firmware to Emagic EMI 6|2m low latency USB
          Audio and Midi interface.

          After firmware load the device is handled with standard linux
          USB Audio driver.

          This code is also available as a module ( = code which can be
          inserted in and removed from the running kernel whenever you want).
          The module will be called audio. If you want to compile it as a
          module, say M here and read <file:Documentation/kbuild/modules.txt>.

config USB_EMI26
        tristate "EMI 2|6 USB Audio interface support"
        depends on USB
        ---help---
          This driver loads firmware to Emagic EMI 2|6 low latency USB
          Audio interface.

          After firmware load the device is handled with standard linux
          USB Audio driver.

          To compile this driver as a module, choose M here: the
          module will be called emi26.

config USB_ADUTUX
        tristate "ADU devices from Ontrak Control Systems"
        depends on USB
        help
          Say Y if you want to use an ADU device from Ontrak Control
          Systems.

          To compile this driver as a module, choose M here.  The module
          will be called adutux.

config USB_SEVSEG
        tristate "USB 7-Segment LED Display"
        depends on USB
        help
          Say Y here if you have a USB 7-Segment Display by Delcom

          To compile this driver as a module, choose M here: the
          module will be called usbsevseg.

config USB_RIO500
        tristate "USB Diamond Rio500 support"
        depends on USB
        help
          Say Y here if you want to connect a USB Rio500 mp3 player to your
          computer's USB port. Please read <file:Documentation/usb/rio.txt>
          for more information.

          To compile this driver as a module, choose M here: the
          module will be called rio500.

config USB_LEGOTOWER
        tristate "USB Lego Infrared Tower support"
        depends on USB
        help
          Say Y here if you want to connect a USB Lego Infrared Tower to your
          computer's USB port.

          This code is also available as a module ( = code which can be
          inserted in and removed from the running kernel whenever you want).
          The module will be called legousbtower. If you want to compile it as
          a module, say M here and read
          <file:Documentation/kbuild/modules.txt>.

config USB_LCD
        tristate "USB LCD driver support"
        depends on USB
        help
          Say Y here if you want to connect an USBLCD to your computer's
          USB port. The USBLCD is a small USB interface board for
          alphanumeric LCD modules. See <http://www.usblcd.de/> for more
          information.

          To compile this driver as a module, choose M here: the
          module will be called usblcd.

config USB_LED
        tristate "USB LED driver support"
        depends on USB
        help
          Say Y here if you want to connect an USBLED device to your 
          computer's USB port.

          To compile this driver as a module, choose M here: the
          module will be called usbled.

config USB_CYPRESS_CY7C63
        tristate "Cypress CY7C63xxx USB driver support"
        depends on USB
        help
          Say Y here if you want to connect a Cypress CY7C63xxx
          micro controller to your computer's USB port. Currently this
          driver supports the pre-programmed devices (incl. firmware)
          by AK Modul-Bus Computer GmbH.

          Please see: http://www.ak-modul-bus.de/stat/mikrocontroller.html

          To compile this driver as a module, choose M here: the
          module will be called cypress_cy7c63.

config USB_CYTHERM
        tristate "Cypress USB thermometer driver support"
        depends on USB
        help
          Say Y here if you want to connect a Cypress USB thermometer
          device to your computer's USB port. This device is also known
          as the Cypress USB Starter kit or demo board. The Elektor
          magazine published a modified version of this device in issue 
          #291.

          To compile this driver as a module, choose M here: the
          module will be called cytherm.

config USB_IDMOUSE
        tristate "Siemens ID USB Mouse Fingerprint sensor support"
        depends on USB
        help
          Say Y here if you want to use the fingerprint sensor on
          the Siemens ID Mouse. There is also a Siemens ID Mouse
          _Professional_, which has not been tested with this driver,
          but uses the same sensor and may therefore work.

          This driver creates an entry "/dev/idmouseX" or "/dev/usb/idmouseX",
          which can be used by, e.g.,"cat /dev/idmouse0 > fingerprint.pnm".

          See also <http://www.fs.tum.de/~echtler/idmouse/>.

config USB_FTDI_ELAN
        tristate "Elan PCMCIA CardBus Adapter USB Client"
        depends on USB
        default M
        help
          ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters.
          Currently only the U132 adapter is available.

          The U132 is specifically designed for CardBus PC cards that contain
          an OHCI host controller. Typical PC cards are the Orange Mobile 3G
          Option GlobeTrotter Fusion card. The U132 adapter will *NOT* work
          with PC cards that do not contain an OHCI controller. To use a U132
          adapter you will need this "ftdi-elan" module as well as the "u132-hcd"
          module which is a USB host controller driver that talks to the OHCI
          controller within CardBus card that are inserted in the U132 adapter.

          This driver has been tested with a CardBus OHCI USB adapter, and
          worked with a USB PEN Drive inserted into the first USB port of
          the PCCARD. A rather pointless thing to do, but useful for testing.

          See also the USB_U132_HCD entry "Elan U132 Adapter Host Controller"

          It is safe to say M here.

config USB_APPLEDISPLAY
        tristate "Apple Cinema Display support"
        depends on USB
        select BACKLIGHT_LCD_SUPPORT
        select BACKLIGHT_CLASS_DEVICE
        help
          Say Y here if you want to control the backlight of Apple Cinema
          Displays over USB. This driver provides a sysfs interface.

source "drivers/usb/misc/sisusbvga/Kconfig"

config USB_LD
        tristate "USB LD driver"
        depends on USB
        help
          This driver is for generic USB devices that use interrupt transfers,
          like LD Didactic's USB devices.

          To compile this driver as a module, choose M here: the
          module will be called ldusb.

config USB_TRANCEVIBRATOR
        tristate "PlayStation 2 Trance Vibrator driver support"
        depends on USB
        help
          Say Y here if you want to connect a PlayStation 2 Trance Vibrator
          device to your computer's USB port.

          To compile this driver as a module, choose M here: the
          module will be called trancevibrator.

config USB_IOWARRIOR
        tristate "IO Warrior driver support"
        depends on USB
        help
          Say Y here if you want to support the IO Warrior devices from Code
          Mercenaries.  This includes support for the following devices:
                IO Warrior 40
                IO Warrior 24
                IO Warrior 56
                IO Warrior 24 Power Vampire

          To compile this driver as a module, choose M here: the
          module will be called iowarrior.

config USB_TEST
        tristate "USB testing driver"
        depends on USB
        help
          This driver is for testing host controller software.  It is used
          with specialized device firmware for regression and stress testing,
          to help prevent problems from cropping up with "real" drivers.

          See <http://www.linux-usb.org/usbtest/> for more information,
          including sample test device firmware and "how to use it".

config USB_ISIGHTFW
        tristate "iSight firmware loading support"
        depends on USB
        select FW_LOADER
        help
          This driver loads firmware for USB Apple iSight cameras, allowing
          them to be driven by the USB video class driver available at
          http://linux-uvc.berlios.de

          The firmware for this driver must be extracted from the MacOS
          driver beforehand. Tools for doing so are available at
          http://bersace03.free.fr

config USB_YUREX
        tristate "USB YUREX driver support"
        depends on USB
        help
          Say Y here if you want to connect a YUREX to your computer's
          USB port. The YUREX is a leg-shakes sensor. See
          <http://bbu.kayac.com/en/> for further information.
          This driver supports read/write of leg-shakes counter and
          fasync for the counter update via a device file /dev/yurex*.

          To compile this driver as a module, choose M here: the
          module will be called yurex.

config USB_EZUSB_FX2
        tristate "Functions for loading firmware on EZUSB chips"
        depends on USB
        help
          Say Y here if you need EZUSB device support.
          (Cypress FX/FX2/FX2LP microcontrollers)

config USB_HSIC_USB3503
       tristate "USB3503 HSIC to USB20 Driver"
       depends on I2C
       help
         This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver.