/*
 * Copyright (C) ST-Ericsson SA 2012
 *
 * Charger driver for AB8500
 *
 * License Terms: GNU General Public License v2
 * Author:
 *      Johan Palsson <johan.palsson@stericsson.com>
 *      Karl Komierowski <karl.komierowski@stericsson.com>
 *      Arun R Murthy <arun.murthy@stericsson.com>
 */

#include <linux/init.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/completion.h>
#include <linux/regulator/consumer.h>
#include <linux/err.h>
#include <linux/workqueue.h>
#include <linux/kobject.h>
#include <linux/of.h>
#include <linux/mfd/core.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500-bm.h>
#include <linux/mfd/abx500/ab8500-gpadc.h>
#include <linux/mfd/abx500/ux500_chargalg.h>
#include <linux/usb/otg.h>
#include <linux/mutex.h>

/* Charger constants */
#define NO_PW_CONN                      0
#define AC_PW_CONN                      1
#define USB_PW_CONN                     2

#define MAIN_WDOG_ENA                   0x01
#define MAIN_WDOG_KICK                  0x02
#define MAIN_WDOG_DIS                   0x00
#define CHARG_WD_KICK                   0x01
#define MAIN_CH_ENA                     0x01
#define MAIN_CH_NO_OVERSHOOT_ENA_N      0x02
#define USB_CH_ENA                      0x01
#define USB_CHG_NO_OVERSHOOT_ENA_N      0x02
#define MAIN_CH_DET                     0x01
#define MAIN_CH_CV_ON                   0x04
#define USB_CH_CV_ON                    0x08
#define VBUS_DET_DBNC100                0x02
#define VBUS_DET_DBNC1                  0x01
#define OTP_ENABLE_WD                   0x01

#define MAIN_CH_INPUT_CURR_SHIFT        4
#define VBUS_IN_CURR_LIM_SHIFT          4
#define AUTO_VBUS_IN_CURR_LIM_SHIFT     4

#define LED_INDICATOR_PWM_ENA           0x01
#define LED_INDICATOR_PWM_DIS           0x00
#define LED_IND_CUR_5MA                 0x04
#define LED_INDICATOR_PWM_DUTY_252_256  0xBF

/* HW failure constants */
#define MAIN_CH_TH_PROT                 0x02
#define VBUS_CH_NOK                     0x08
#define USB_CH_TH_PROT                  0x02
#define VBUS_OVV_TH                     0x01
#define MAIN_CH_NOK                     0x01
#define VBUS_DET                        0x80

#define MAIN_CH_STATUS2_MAINCHGDROP             0x80
#define MAIN_CH_STATUS2_MAINCHARGERDETDBNC      0x40
#define USB_CH_VBUSDROP                         0x40
#define USB_CH_VBUSDETDBNC                      0x01

/* UsbLineStatus register bit masks */
#define AB8500_USB_LINK_STATUS          0x78
#define AB8500_STD_HOST_SUSP            0x18

/* Watchdog timeout constant */
#define WD_TIMER                        0x30 /* 4min */
#define WD_KICK_INTERVAL                (60 * HZ)

/* Lowest charger voltage is 3.39V -> 0x4E */
#define LOW_VOLT_REG                    0x4E

/* Step up/down delay in us */
#define STEP_UDELAY                     1000

#define CHARGER_STATUS_POLL 10 /* in ms */

#define CHG_WD_INTERVAL                 (60 * HZ)

#define AB8500_SW_CONTROL_FALLBACK      0x03
/* Wait for enumeration before charing in us */
#define WAIT_ACA_RID_ENUMERATION        (5 * 1000)

/* UsbLineStatus register - usb types */
enum ab8500_charger_link_status {
        USB_STAT_NOT_CONFIGURED,
        USB_STAT_STD_HOST_NC,
        USB_STAT_STD_HOST_C_NS,
        USB_STAT_STD_HOST_C_S,
        USB_STAT_HOST_CHG_NM,
        USB_STAT_HOST_CHG_HS,
        USB_STAT_HOST_CHG_HS_CHIRP,
        USB_STAT_DEDICATED_CHG,
        USB_STAT_ACA_RID_A,
        USB_STAT_ACA_RID_B,
        USB_STAT_ACA_RID_C_NM,
        USB_STAT_ACA_RID_C_HS,
        USB_STAT_ACA_RID_C_HS_CHIRP,
        USB_STAT_HM_IDGND,
        USB_STAT_RESERVED,
        USB_STAT_NOT_VALID_LINK,
        USB_STAT_PHY_EN,
        USB_STAT_SUP_NO_IDGND_VBUS,
        USB_STAT_SUP_IDGND_VBUS,
        USB_STAT_CHARGER_LINE_1,
        USB_STAT_CARKIT_1,
        USB_STAT_CARKIT_2,
        USB_STAT_ACA_DOCK_CHARGER,
};

enum ab8500_usb_state {
        AB8500_BM_USB_STATE_RESET_HS,   /* HighSpeed Reset */
        AB8500_BM_USB_STATE_RESET_FS,   /* FullSpeed/LowSpeed Reset */
        AB8500_BM_USB_STATE_CONFIGURED,
        AB8500_BM_USB_STATE_SUSPEND,
        AB8500_BM_USB_STATE_RESUME,
        AB8500_BM_USB_STATE_MAX,
};

/* VBUS input current limits supported in AB8500 in mA */
#define USB_CH_IP_CUR_LVL_0P05          50
#define USB_CH_IP_CUR_LVL_0P09          98
#define USB_CH_IP_CUR_LVL_0P19          193
#define USB_CH_IP_CUR_LVL_0P29          290
#define USB_CH_IP_CUR_LVL_0P38          380
#define USB_CH_IP_CUR_LVL_0P45          450
#define USB_CH_IP_CUR_LVL_0P5           500
#define USB_CH_IP_CUR_LVL_0P6           600
#define USB_CH_IP_CUR_LVL_0P7           700
#define USB_CH_IP_CUR_LVL_0P8           800
#define USB_CH_IP_CUR_LVL_0P9           900
#define USB_CH_IP_CUR_LVL_1P0           1000
#define USB_CH_IP_CUR_LVL_1P1           1100
#define USB_CH_IP_CUR_LVL_1P3           1300
#define USB_CH_IP_CUR_LVL_1P4           1400
#define USB_CH_IP_CUR_LVL_1P5           1500

#define VBAT_TRESH_IP_CUR_RED           3800

#define to_ab8500_charger_usb_device_info(x) container_of((x), \
        struct ab8500_charger, usb_chg)
#define to_ab8500_charger_ac_device_info(x) container_of((x), \
        struct ab8500_charger, ac_chg)

/**
 * struct ab8500_charger_interrupts - ab8500 interupts
 * @name:       name of the interrupt
 * @isr         function pointer to the isr
 */
struct ab8500_charger_interrupts {
        char *name;
        irqreturn_t (*isr)(int irq, void *data);
};

struct ab8500_charger_info {
        int charger_connected;
        int charger_online;
        int charger_voltage;
        int cv_active;
        bool wd_expired;
        int charger_current;
};

struct ab8500_charger_event_flags {
        bool mainextchnotok;
        bool main_thermal_prot;
        bool usb_thermal_prot;
        bool vbus_ovv;
        bool usbchargernotok;
        bool chgwdexp;
        bool vbus_collapse;
        bool vbus_drop_end;
};

struct ab8500_charger_usb_state {
        int usb_current;
        int usb_current_tmp;
        enum ab8500_usb_state state;
        enum ab8500_usb_state state_tmp;
        spinlock_t usb_lock;
};

/**
 * struct ab8500_charger - ab8500 Charger device information
 * @dev:                Pointer to the structure device
 * @max_usb_in_curr:    Max USB charger input current
 * @vbus_detected:      VBUS detected
 * @vbus_detected_start:
 *                      VBUS detected during startup
 * @ac_conn:            This will be true when the AC charger has been plugged
 * @vddadc_en_ac:       Indicate if VDD ADC supply is enabled because AC
 *                      charger is enabled
 * @vddadc_en_usb:      Indicate if VDD ADC supply is enabled because USB
 *                      charger is enabled
 * @vbat                Battery voltage
 * @old_vbat            Previously measured battery voltage
 * @usb_device_is_unrecognised  USB device is unrecognised by the hardware
 * @autopower           Indicate if we should have automatic pwron after pwrloss
 * @autopower_cfg       platform specific power config support for "pwron after pwrloss"
 * @invalid_charger_detect_state State when forcing AB to use invalid charger
 * @is_usb_host:        Indicate if last detected USB type is host
 * @is_aca_rid:         Incicate if accessory is ACA type
 * @current_stepping_sessions:
 *                      Counter for current stepping sessions
 * @parent:             Pointer to the struct ab8500
 * @gpadc:              Pointer to the struct gpadc
 * @bm:                 Platform specific battery management information
 * @flags:              Structure for information about events triggered
 * @usb_state:          Structure for usb stack information
 * @ac_chg:             AC charger power supply
 * @usb_chg:            USB charger power supply
 * @ac:                 Structure that holds the AC charger properties
 * @usb:                Structure that holds the USB charger properties
 * @regu:               Pointer to the struct regulator
 * @charger_wq:         Work queue for the IRQs and checking HW state
 * @usb_ipt_crnt_lock:  Lock to protect VBUS input current setting from mutuals
 * @pm_lock:            Lock to prevent system to suspend
 * @check_vbat_work     Work for checking vbat threshold to adjust vbus current
 * @check_hw_failure_work:      Work for checking HW state
 * @check_usbchgnotok_work:     Work for checking USB charger not ok status
 * @kick_wd_work:               Work for kicking the charger watchdog in case
 *                              of ABB rev 1.* due to the watchog logic bug
 * @ac_charger_attached_work:   Work for checking if AC charger is still
 *                              connected
 * @usb_charger_attached_work:  Work for checking if USB charger is still
 *                              connected
 * @ac_work:                    Work for checking AC charger connection
 * @detect_usb_type_work:       Work for detecting the USB type connected
 * @usb_link_status_work:       Work for checking the new USB link status
 * @usb_state_changed_work:     Work for checking USB state
 * @attach_work:                Work for detecting USB type
 * @vbus_drop_end_work:         Work for detecting VBUS drop end
 * @check_main_thermal_prot_work:
 *                              Work for checking Main thermal status
 * @check_usb_thermal_prot_work:
 *                              Work for checking USB thermal status
 * @charger_attached_mutex:     For controlling the wakelock
 */
struct ab8500_charger {
        struct device *dev;
        int max_usb_in_curr;
        bool vbus_detected;
        bool vbus_detected_start;
        bool ac_conn;
        bool vddadc_en_ac;
        bool vddadc_en_usb;
        int vbat;
        int old_vbat;
        bool usb_device_is_unrecognised;
        bool autopower;
        bool autopower_cfg;
        int invalid_charger_detect_state;
        bool is_usb_host;
        int is_aca_rid;
        atomic_t current_stepping_sessions;
        struct ab8500 *parent;
        struct ab8500_gpadc *gpadc;
        struct abx500_bm_data *bm;
        struct ab8500_charger_event_flags flags;
        struct ab8500_charger_usb_state usb_state;
        struct ux500_charger ac_chg;
        struct ux500_charger usb_chg;
        struct ab8500_charger_info ac;
        struct ab8500_charger_info usb;
        struct regulator *regu;
        struct workqueue_struct *charger_wq;
        struct mutex usb_ipt_crnt_lock;
        struct delayed_work check_vbat_work;
        struct delayed_work check_hw_failure_work;
        struct delayed_work check_usbchgnotok_work;
        struct delayed_work kick_wd_work;
        struct delayed_work usb_state_changed_work;
        struct delayed_work attach_work;
        struct delayed_work ac_charger_attached_work;
        struct delayed_work usb_charger_attached_work;
        struct delayed_work vbus_drop_end_work;
        struct work_struct ac_work;
        struct work_struct detect_usb_type_work;
        struct work_struct usb_link_status_work;
        struct work_struct check_main_thermal_prot_work;
        struct work_struct check_usb_thermal_prot_work;
        struct usb_phy *usb_phy;
        struct notifier_block nb;
        struct mutex charger_attached_mutex;
};

/* AC properties */
static enum power_supply_property ab8500_charger_ac_props[] = {
        POWER_SUPPLY_PROP_HEALTH,
        POWER_SUPPLY_PROP_PRESENT,
        POWER_SUPPLY_PROP_ONLINE,
        POWER_SUPPLY_PROP_VOLTAGE_NOW,
        POWER_SUPPLY_PROP_VOLTAGE_AVG,
        POWER_SUPPLY_PROP_CURRENT_NOW,
};

/* USB properties */
static enum power_supply_property ab8500_charger_usb_props[] = {
        POWER_SUPPLY_PROP_HEALTH,
        POWER_SUPPLY_PROP_CURRENT_AVG,
        POWER_SUPPLY_PROP_PRESENT,
        POWER_SUPPLY_PROP_ONLINE,
        POWER_SUPPLY_PROP_VOLTAGE_NOW,
        POWER_SUPPLY_PROP_VOLTAGE_AVG,
        POWER_SUPPLY_PROP_CURRENT_NOW,
};

/*
 * Function for enabling and disabling sw fallback mode
 * should always be disabled when no charger is connected.
 */
static void ab8500_enable_disable_sw_fallback(struct ab8500_charger *di,
                bool fallback)
{
        u8 val;
        u8 reg;
        u8 bank;
        u8 bit;
        int ret;

        dev_dbg(di->dev, "SW Fallback: %d\n", fallback);

        if (is_ab8500(di->parent)) {
                bank = 0x15;
                reg = 0x0;
                bit = 3;
        } else {
                bank = AB8500_SYS_CTRL1_BLOCK;
                reg = AB8500_SW_CONTROL_FALLBACK;
                bit = 0;
        }

        /* read the register containing fallback bit */
        ret = abx500_get_register_interruptible(di->dev, bank, reg, &val);
        if (ret < 0) {
                dev_err(di->dev, "%d read failed\n", __LINE__);
                return;
        }

        if (is_ab8500(di->parent)) {
                /* enable the OPT emulation registers */
                ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x2);
                if (ret) {
                        dev_err(di->dev, "%d write failed\n", __LINE__);
                        goto disable_otp;
                }
        }

        if (fallback)
                val |= (1 << bit);
        else
                val &= ~(1 << bit);

        /* write back the changed fallback bit value to register */
        ret = abx500_set_register_interruptible(di->dev, bank, reg, val);
        if (ret) {
                dev_err(di->dev, "%d write failed\n", __LINE__);
        }

disable_otp:
        if (is_ab8500(di->parent)) {
                /* disable the set OTP registers again */
                ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x0);
                if (ret) {
                        dev_err(di->dev, "%d write failed\n", __LINE__);
                }
        }
}

/**
 * ab8500_power_supply_changed - a wrapper with local extentions for
 * power_supply_changed
 * @di:   pointer to the ab8500_charger structure
 * @psy:  pointer to power_supply_that have changed.
 *
 */
static void ab8500_power_supply_changed(struct ab8500_charger *di,
                                        struct power_supply *psy)
{
        if (di->autopower_cfg) {
                if (!di->usb.charger_connected &&
                    !di->ac.charger_connected &&
                    di->autopower) {
                        di->autopower = false;
                        ab8500_enable_disable_sw_fallback(di, false);
                } else if (!di->autopower &&
                           (di->ac.charger_connected ||
                            di->usb.charger_connected)) {
                        di->autopower = true;
                        ab8500_enable_disable_sw_fallback(di, true);
                }
        }
        power_supply_changed(psy);
}

static void ab8500_charger_set_usb_connected(struct ab8500_charger *di,
        bool connected)
{
        if (connected != di->usb.charger_connected) {
                dev_dbg(di->dev, "USB connected:%i\n", connected);
                di->usb.charger_connected = connected;
                sysfs_notify(&di->usb_chg.psy.dev->kobj, NULL, "present");

                if (connected) {
                        mutex_lock(&di->charger_attached_mutex);
                        mutex_unlock(&di->charger_attached_mutex);

                        queue_delayed_work(di->charger_wq,
                                           &di->usb_charger_attached_work,
                                           HZ);
                } else {
                        cancel_delayed_work_sync(&di->usb_charger_attached_work);
                        mutex_lock(&di->charger_attached_mutex);
                        mutex_unlock(&di->charger_attached_mutex);
                }
        }
}

/**
 * ab8500_charger_get_ac_voltage() - get ac charger voltage
 * @di:         pointer to the ab8500_charger structure
 *
 * Returns ac charger voltage (on success)
 */
static int ab8500_charger_get_ac_voltage(struct ab8500_charger *di)
{
        int vch;

        /* Only measure voltage if the charger is connected */
        if (di->ac.charger_connected) {
                vch = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_V);
                if (vch < 0)
                        dev_err(di->dev, "%s gpadc conv failed,\n", __func__);
        } else {
                vch = 0;
        }
        return vch;
}

/**
 * ab8500_charger_ac_cv() - check if the main charger is in CV mode
 * @di:         pointer to the ab8500_charger structure
 *
 * Returns ac charger CV mode (on success) else error code
 */
static int ab8500_charger_ac_cv(struct ab8500_charger *di)
{
        u8 val;
        int ret = 0;

        /* Only check CV mode if the charger is online */
        if (di->ac.charger_online) {
                ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
                        AB8500_CH_STATUS1_REG, &val);
                if (ret < 0) {
                        dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                        return 0;
                }

                if (val & MAIN_CH_CV_ON)
                        ret = 1;
                else
                        ret = 0;
        }

        return ret;
}

/**
 * ab8500_charger_get_vbus_voltage() - get vbus voltage
 * @di:         pointer to the ab8500_charger structure
 *
 * This function returns the vbus voltage.
 * Returns vbus voltage (on success)
 */
static int ab8500_charger_get_vbus_voltage(struct ab8500_charger *di)
{
        int vch;

        /* Only measure voltage if the charger is connected */
        if (di->usb.charger_connected) {
                vch = ab8500_gpadc_convert(di->gpadc, VBUS_V);
                if (vch < 0)
                        dev_err(di->dev, "%s gpadc conv failed\n", __func__);
        } else {
                vch = 0;
        }
        return vch;
}

/**
 * ab8500_charger_get_usb_current() - get usb charger current
 * @di:         pointer to the ab8500_charger structure
 *
 * This function returns the usb charger current.
 * Returns usb current (on success) and error code on failure
 */
static int ab8500_charger_get_usb_current(struct ab8500_charger *di)
{
        int ich;

        /* Only measure current if the charger is online */
        if (di->usb.charger_online) {
                ich = ab8500_gpadc_convert(di->gpadc, USB_CHARGER_C);
                if (ich < 0)
                        dev_err(di->dev, "%s gpadc conv failed\n", __func__);
        } else {
                ich = 0;
        }
        return ich;
}

/**
 * ab8500_charger_get_ac_current() - get ac charger current
 * @di:         pointer to the ab8500_charger structure
 *
 * This function returns the ac charger current.
 * Returns ac current (on success) and error code on failure.
 */
static int ab8500_charger_get_ac_current(struct ab8500_charger *di)
{
        int ich;

        /* Only measure current if the charger is online */
        if (di->ac.charger_online) {
                ich = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_C);
                if (ich < 0)
                        dev_err(di->dev, "%s gpadc conv failed\n", __func__);
        } else {
                ich = 0;
        }
        return ich;
}

/**
 * ab8500_charger_usb_cv() - check if the usb charger is in CV mode
 * @di:         pointer to the ab8500_charger structure
 *
 * Returns ac charger CV mode (on success) else error code
 */
static int ab8500_charger_usb_cv(struct ab8500_charger *di)
{
        int ret;
        u8 val;

        /* Only check CV mode if the charger is online */
        if (di->usb.charger_online) {
                ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
                        AB8500_CH_USBCH_STAT1_REG, &val);
                if (ret < 0) {
                        dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                        return 0;
                }

                if (val & USB_CH_CV_ON)
                        ret = 1;
                else
                        ret = 0;
        } else {
                ret = 0;
        }

        return ret;
}

/**
 * ab8500_charger_detect_chargers() - Detect the connected chargers
 * @di:         pointer to the ab8500_charger structure
 * @probe:      if probe, don't delay and wait for HW
 *
 * Returns the type of charger connected.
 * For USB it will not mean we can actually charge from it
 * but that there is a USB cable connected that we have to
 * identify. This is used during startup when we don't get
 * interrupts of the charger detection
 *
 * Returns an integer value, that means,
 * NO_PW_CONN  no power supply is connected
 * AC_PW_CONN  if the AC power supply is connected
 * USB_PW_CONN  if the USB power supply is connected
 * AC_PW_CONN + USB_PW_CONN if USB and AC power supplies are both connected
 */
static int ab8500_charger_detect_chargers(struct ab8500_charger *di, bool probe)
{
        int result = NO_PW_CONN;
        int ret;
        u8 val;

        /* Check for AC charger */
        ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
                AB8500_CH_STATUS1_REG, &val);
        if (ret < 0) {
                dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                return ret;
        }

        if (val & MAIN_CH_DET)
                result = AC_PW_CONN;

        /* Check for USB charger */

        if (!probe) {
                /*
                 * AB8500 says VBUS_DET_DBNC1 & VBUS_DET_DBNC100
                 * when disconnecting ACA even though no
                 * charger was connected. Try waiting a little
                 * longer than the 100 ms of VBUS_DET_DBNC100...
                 */
                msleep(110);
        }
        ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
                AB8500_CH_USBCH_STAT1_REG, &val);
        if (ret < 0) {
                dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                return ret;
        }
        dev_dbg(di->dev,
                "%s AB8500_CH_USBCH_STAT1_REG %x\n", __func__,
                val);
        if ((val & VBUS_DET_DBNC1) && (val & VBUS_DET_DBNC100))
                result |= USB_PW_CONN;

        return result;
}

/**
 * ab8500_charger_max_usb_curr() - get the max curr for the USB type
 * @di:                 pointer to the ab8500_charger structure
 * @link_status:        the identified USB type
 *
 * Get the maximum current that is allowed to be drawn from the host
 * based on the USB type.
 * Returns error code in case of failure else 0 on success
 */
static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
                enum ab8500_charger_link_status link_status)
{
        int ret = 0;

        di->usb_device_is_unrecognised = false;

        /*
         * Platform only supports USB 2.0.
         * This means that charging current from USB source
         * is maximum 500 mA. Every occurence of USB_STAT_*_HOST_*
         * should set USB_CH_IP_CUR_LVL_0P5.
         */

        switch (link_status) {
        case USB_STAT_STD_HOST_NC:
        case USB_STAT_STD_HOST_C_NS:
        case USB_STAT_STD_HOST_C_S:
                dev_dbg(di->dev, "USB Type - Standard host is "
                        "detected through USB driver\n");
                di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
                di->is_usb_host = true;
                di->is_aca_rid = 0;
                break;
        case USB_STAT_HOST_CHG_HS_CHIRP:
                di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
                di->is_usb_host = true;
                di->is_aca_rid = 0;
                break;
        case USB_STAT_HOST_CHG_HS:
                di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
                di->is_usb_host = true;
                di->is_aca_rid = 0;
                break;
        case USB_STAT_ACA_RID_C_HS:
                di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P9;
                di->is_usb_host = false;
                di->is_aca_rid = 0;
                break;
        case USB_STAT_ACA_RID_A:
                /*
                 * Dedicated charger level minus maximum current accessory
                 * can consume (900mA). Closest level is 500mA
                 */
                dev_dbg(di->dev, "USB_STAT_ACA_RID_A detected\n");
                di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
                di->is_usb_host = false;
                di->is_aca_rid = 1;
                break;
        case USB_STAT_ACA_RID_B:
                /*
                 * Dedicated charger level minus 120mA (20mA for ACA and
                 * 100mA for potential accessory). Closest level is 1300mA
                 */
                di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P3;
                dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status,
                                di->max_usb_in_curr);
                di->is_usb_host = false;
                di->is_aca_rid = 1;
                break;
        case USB_STAT_HOST_CHG_NM:
                di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
                di->is_usb_host = true;
                di->is_aca_rid = 0;
                break;
        case USB_STAT_DEDICATED_CHG:
                di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5;
                di->is_usb_host = false;
                di->is_aca_rid = 0;
                break;
        case USB_STAT_ACA_RID_C_HS_CHIRP:
        case USB_STAT_ACA_RID_C_NM:
                di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5;
                di->is_usb_host = false;
                di->is_aca_rid = 1;
                break;
        case USB_STAT_NOT_CONFIGURED:
                if (di->vbus_detected) {
                        di->usb_device_is_unrecognised = true;
                        dev_dbg(di->dev, "USB Type - Legacy charger.\n");
                        di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5;
                        break;
                }
        case USB_STAT_HM_IDGND:
                dev_err(di->dev, "USB Type - Charging not allowed\n");
                di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05;
                ret = -ENXIO;
                break;
        case USB_STAT_RESERVED:
                if (is_ab8500(di->parent)) {
                        di->flags.vbus_collapse = true;
                        dev_err(di->dev, "USB Type - USB_STAT_RESERVED "
                                                "VBUS has collapsed\n");
                        ret = -ENXIO;
                        break;
                }
                if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
                        dev_dbg(di->dev, "USB Type - Charging not allowed\n");
                        di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05;
                        dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d",
                                        link_status, di->max_usb_in_curr);
                        ret = -ENXIO;
                        break;
                }
                break;
        case USB_STAT_CARKIT_1:
        case USB_STAT_CARKIT_2:
        case USB_STAT_ACA_DOCK_CHARGER:
        case USB_STAT_CHARGER_LINE_1:
                di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
                dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status,
                                di->max_usb_in_curr);
        case USB_STAT_NOT_VALID_LINK:
                dev_err(di->dev, "USB Type invalid - try charging anyway\n");
                di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
                break;

        default:
                dev_err(di->dev, "USB Type - Unknown\n");
                di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05;
                ret = -ENXIO;
                break;
        };

        dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d",
                link_status, di->max_usb_in_curr);

        return ret;
}

/**
 * ab8500_charger_read_usb_type() - read the type of usb connected
 * @di:         pointer to the ab8500_charger structure
 *
 * Detect the type of the plugged USB
 * Returns error code in case of failure else 0 on success
 */
static int ab8500_charger_read_usb_type(struct ab8500_charger *di)
{
        int ret;
        u8 val;

        ret = abx500_get_register_interruptible(di->dev,
                AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG, &val);
        if (ret < 0) {
                dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                return ret;
        }
        if (is_ab8500(di->parent)) {
                ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
                                AB8500_USB_LINE_STAT_REG, &val);
        } else {
                if (is_ab9540(di->parent) || is_ab8505(di->parent))
                        ret = abx500_get_register_interruptible(di->dev,
                                AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val);
        }
        if (ret < 0) {
                dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                return ret;
        }

        /* get the USB type */
        val = (val & AB8500_USB_LINK_STATUS) >> 3;
        ret = ab8500_charger_max_usb_curr(di,
                (enum ab8500_charger_link_status) val);

        return ret;
}

/**
 * ab8500_charger_detect_usb_type() - get the type of usb connected
 * @di:         pointer to the ab8500_charger structure
 *
 * Detect the type of the plugged USB
 * Returns error code in case of failure else 0 on success
 */
static int ab8500_charger_detect_usb_type(struct ab8500_charger *di)
{
        int i, ret;
        u8 val;

        /*
         * On getting the VBUS rising edge detect interrupt there
         * is a 250ms delay after which the register UsbLineStatus
         * is filled with valid data.
         */
        for (i = 0; i < 10; i++) {
                msleep(250);
                ret = abx500_get_register_interruptible(di->dev,
                        AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG,
                        &val);
                dev_dbg(di->dev, "%s AB8500_IT_SOURCE21_REG %x\n",
                        __func__, val);
                if (ret < 0) {
                        dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                        return ret;
                }

                if (is_ab8500(di->parent))
                        ret = abx500_get_register_interruptible(di->dev,
                                AB8500_USB, AB8500_USB_LINE_STAT_REG, &val);
                else
                        ret = abx500_get_register_interruptible(di->dev,
                                AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val);
                if (ret < 0) {
                        dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                        return ret;
                }
                dev_dbg(di->dev, "%s AB8500_USB_LINE_STAT_REG %x\n", __func__,
                        val);
                /*
                 * Until the IT source register is read the UsbLineStatus
                 * register is not updated, hence doing the same
                 * Revisit this:
                 */

                /* get the USB type */
                val = (val & AB8500_USB_LINK_STATUS) >> 3;
                if (val)
                        break;
        }
        ret = ab8500_charger_max_usb_curr(di,
                (enum ab8500_charger_link_status) val);

        return ret;
}

/*
 * This array maps the raw hex value to charger voltage used by the AB8500
 * Values taken from the UM0836
 */
static int ab8500_charger_voltage_map[] = {
        3500 ,
        3525 ,
        3550 ,
        3575 ,
        3600 ,
        3625 ,
        3650 ,
        3675 ,
        3700 ,
        3725 ,
        3750 ,
        3775 ,
        3800 ,
        3825 ,
        3850 ,
        3875 ,
        3900 ,
        3925 ,
        3950 ,
        3975 ,
        4000 ,
        4025 ,
        4050 ,
        4060 ,
        4070 ,
        4080 ,
        4090 ,
        4100 ,
        4110 ,
        4120 ,
        4130 ,
        4140 ,
        4150 ,
        4160 ,
        4170 ,
        4180 ,
        4190 ,
        4200 ,
        4210 ,
        4220 ,
        4230 ,
        4240 ,
        4250 ,
        4260 ,
        4270 ,
        4280 ,
        4290 ,
        4300 ,
        4310 ,
        4320 ,
        4330 ,
        4340 ,
        4350 ,
        4360 ,
        4370 ,
        4380 ,
        4390 ,
        4400 ,
        4410 ,
        4420 ,
        4430 ,
        4440 ,
        4450 ,
        4460 ,
        4470 ,
        4480 ,
        4490 ,
        4500 ,
        4510 ,
        4520 ,
        4530 ,
        4540 ,
        4550 ,
        4560 ,
        4570 ,
        4580 ,
        4590 ,
        4600 ,
};

/*
 * This array maps the raw hex value to charger current used by the AB8500
 * Values taken from the UM0836
 */
static int ab8500_charger_current_map[] = {
        100 ,
        200 ,
        300 ,
        400 ,
        500 ,
        600 ,
        700 ,
        800 ,
        900 ,
        1000 ,
        1100 ,
        1200 ,
        1300 ,
        1400 ,
        1500 ,
};

/*
 * This array maps the raw hex value to VBUS input current used by the AB8500
 * Values taken from the UM0836
 */
static int ab8500_charger_vbus_in_curr_map[] = {
        USB_CH_IP_CUR_LVL_0P05,
        USB_CH_IP_CUR_LVL_0P09,
        USB_CH_IP_CUR_LVL_0P19,
        USB_CH_IP_CUR_LVL_0P29,
        USB_CH_IP_CUR_LVL_0P38,
        USB_CH_IP_CUR_LVL_0P45,
        USB_CH_IP_CUR_LVL_0P5,
        USB_CH_IP_CUR_LVL_0P6,
        USB_CH_IP_CUR_LVL_0P7,
        USB_CH_IP_CUR_LVL_0P8,
        USB_CH_IP_CUR_LVL_0P9,

        USB_CH_IP_CUR_LVL_1P0,
        USB_CH_IP_CUR_LVL_1P1,
        USB_CH_IP_CUR_LVL_1P3,
        USB_CH_IP_CUR_LVL_1P4,
        USB_CH_IP_CUR_LVL_1P5,
};

static int ab8500_voltage_to_regval(int voltage)
{
        int i;

        /* Special case for voltage below 3.5V */
        if (voltage < ab8500_charger_voltage_map[0])
                return LOW_VOLT_REG;

        for (i = 1; i < ARRAY_SIZE(ab8500_charger_voltage_map); i++) {
                if (voltage < ab8500_charger_voltage_map[i])
                        return i - 1;
        }

        /* If not last element, return error */
        i = ARRAY_SIZE(ab8500_charger_voltage_map) - 1;
        if (voltage == ab8500_charger_voltage_map[i])
                return i;
        else
                return -1;
}

static int ab8500_current_to_regval(int curr)
{
        int i;

        if (curr < ab8500_charger_current_map[0])
                return 0;

        for (i = 0; i < ARRAY_SIZE(ab8500_charger_current_map); i++) {
                if (curr < ab8500_charger_current_map[i])
                        return i - 1;
        }

        /* If not last element, return error */
        i = ARRAY_SIZE(ab8500_charger_current_map) - 1;
        if (curr == ab8500_charger_current_map[i])
                return i;
        else
                return -1;
}

static int ab8500_vbus_in_curr_to_regval(int curr)
{
        int i;

        if (curr < ab8500_charger_vbus_in_curr_map[0])
                return 0;

        for (i = 0; i < ARRAY_SIZE(ab8500_charger_vbus_in_curr_map); i++) {
                if (curr < ab8500_charger_vbus_in_curr_map[i])
                        return i - 1;
        }

        /* If not last element, return error */
        i = ARRAY_SIZE(ab8500_charger_vbus_in_curr_map) - 1;
        if (curr == ab8500_charger_vbus_in_curr_map[i])
                return i;
        else
                return -1;
}

/**
 * ab8500_charger_get_usb_cur() - get usb current
 * @di:         pointer to the ab8500_charger structre
 *
 * The usb stack provides the maximum current that can be drawn from
 * the standard usb host. This will be in mA.
 * This function converts current in mA to a value that can be written
 * to the register. Returns -1 if charging is not allowed
 */
static int ab8500_charger_get_usb_cur(struct ab8500_charger *di)
{
        switch (di->usb_state.usb_current) {
        case 100:
                di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P09;
                break;
        case 200:
                di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P19;
                break;
        case 300:
                di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P29;
                break;
        case 400:
                di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P38;
                break;
        case 500:
                di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
                break;
        default:
                di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05;
                return -1;
                break;
        };
        return 0;
}

/**
 * ab8500_charger_set_current() - set charger current
 * @di:         pointer to the ab8500_charger structure
 * @ich:        charger current, in mA
 * @reg:        select what charger register to set
 *
 * Set charger current.
 * There is no state machine in the AB to step up/down the charger
 * current to avoid dips and spikes on MAIN, VBUS and VBAT when
 * charging is started. Instead we need to implement
 * this charger current step-up/down here.
 * Returns error code in case of failure else 0(on success)
 */
static int ab8500_charger_set_current(struct ab8500_charger *di,
        int ich, int reg)
{
        int ret = 0;
        int auto_curr_index, curr_index, prev_curr_index, shift_value, i;
        u8 reg_value;
        u32 step_udelay;
        bool no_stepping = false;

        atomic_inc(&di->current_stepping_sessions);

        ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
                reg, &reg_value);
        if (ret < 0) {
                dev_err(di->dev, "%s read failed\n", __func__);
                goto exit_set_current;
        }

        switch (reg) {
        case AB8500_MCH_IPT_CURLVL_REG:
                shift_value = MAIN_CH_INPUT_CURR_SHIFT;
                prev_curr_index = (reg_value >> shift_value);
                curr_index = ab8500_current_to_regval(ich);
                step_udelay = STEP_UDELAY;
                if (!di->ac.charger_connected)
                        no_stepping = true;
                break;
        case AB8500_USBCH_IPT_CRNTLVL_REG:
                shift_value = VBUS_IN_CURR_LIM_SHIFT;
                prev_curr_index = (reg_value >> shift_value);
                curr_index = ab8500_vbus_in_curr_to_regval(ich);
                step_udelay = STEP_UDELAY * 100;

                ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
                                        AB8500_CH_USBCH_STAT2_REG, &reg_value);
                if (ret < 0) {
                        dev_err(di->dev, "%s read failed\n", __func__);
                        goto exit_set_current;
                }
                auto_curr_index =
                        reg_value >> AUTO_VBUS_IN_CURR_LIM_SHIFT;

                dev_dbg(di->dev, "%s Auto VBUS curr is %d mA\n",
                        __func__,
                        ab8500_charger_vbus_in_curr_map[auto_curr_index]);

                prev_curr_index = min(prev_curr_index, auto_curr_index);

                if (!di->usb.charger_connected)
                        no_stepping = true;
                break;
        case AB8500_CH_OPT_CRNTLVL_REG:
                shift_value = 0;
                prev_curr_index = (reg_value >> shift_value);
                curr_index = ab8500_current_to_regval(ich);
                step_udelay = STEP_UDELAY;
                if (curr_index && (curr_index - prev_curr_index) > 1)
                        step_udelay *= 100;

                if (!di->usb.charger_connected && !di->ac.charger_connected)
                        no_stepping = true;

                break;
        default:
                dev_err(di->dev, "%s current register not valid\n", __func__);
                ret = -ENXIO;
                goto exit_set_current;
        }

        if (curr_index < 0) {
                dev_err(di->dev, "requested current limit out-of-range\n");
                ret = -ENXIO;
                goto exit_set_current;
        }

        /* only update current if it's been changed */
        if (prev_curr_index == curr_index) {
                dev_dbg(di->dev, "%s current not changed for reg: 0x%02x\n",
                        __func__, reg);
                ret = 0;
                goto exit_set_current;
        }

        dev_dbg(di->dev, "%s set charger current: %d mA for reg: 0x%02x\n",
                __func__, ich, reg);

        if (no_stepping) {
                ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
                                        reg, (u8)curr_index << shift_value);
                if (ret)
                        dev_err(di->dev, "%s write failed\n", __func__);
        } else if (prev_curr_index > curr_index) {
                for (i = prev_curr_index - 1; i >= curr_index; i--) {
                        dev_dbg(di->dev, "curr change_1 to: %x for 0x%02x\n",
                                (u8) i << shift_value, reg);
                        ret = abx500_set_register_interruptible(di->dev,
                                AB8500_CHARGER, reg, (u8)i << shift_value);
                        if (ret) {
                                dev_err(di->dev, "%s write failed\n", __func__);
                                goto exit_set_current;
                        }
                        if (i != curr_index)
                                usleep_range(step_udelay, step_udelay * 2);
                }
        } else {
                for (i = prev_curr_index + 1; i <= curr_index; i++) {
                        dev_dbg(di->dev, "curr change_2 to: %x for 0x%02x\n",
                                (u8)i << shift_value, reg);
                        ret = abx500_set_register_interruptible(di->dev,
                                AB8500_CHARGER, reg, (u8)i << shift_value);
                        if (ret) {
                                dev_err(di->dev, "%s write failed\n", __func__);
                                goto exit_set_current;
                        }
                        if (i != curr_index)
                                usleep_range(step_udelay, step_udelay * 2);
                }
        }

exit_set_current:
        atomic_dec(&di->current_stepping_sessions);

        return ret;
}

/**
 * ab8500_charger_set_vbus_in_curr() - set VBUS input current limit
 * @di:         pointer to the ab8500_charger structure
 * @ich_in:     charger input current limit
 *
 * Sets the current that can be drawn from the USB host
 * Returns error code in case of failure else 0(on success)
 */
static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di,
                int ich_in)
{
        int min_value;
        int ret;

        /* We should always use to lowest current limit */
        min_value = min(di->bm->chg_params->usb_curr_max, ich_in);

        switch (min_value) {
        case 100:
                if (di->vbat < VBAT_TRESH_IP_CUR_RED)
                        min_value = USB_CH_IP_CUR_LVL_0P05;
                break;
        case 500:
                if (di->vbat < VBAT_TRESH_IP_CUR_RED)
                        min_value = USB_CH_IP_CUR_LVL_0P45;
                break;
        default:
                break;
        }

        dev_info(di->dev, "VBUS input current limit set to %d mA\n", min_value);

        mutex_lock(&di->usb_ipt_crnt_lock);
        ret = ab8500_charger_set_current(di, min_value,
                AB8500_USBCH_IPT_CRNTLVL_REG);
        mutex_unlock(&di->usb_ipt_crnt_lock);

        return ret;
}

/**
 * ab8500_charger_set_main_in_curr() - set main charger input current
 * @di:         pointer to the ab8500_charger structure
 * @ich_in:     input charger current, in mA
 *
 * Set main charger input current.
 * Returns error code in case of failure else 0(on success)
 */
static int ab8500_charger_set_main_in_curr(struct ab8500_charger *di,
        int ich_in)
{
        return ab8500_charger_set_current(di, ich_in,
                AB8500_MCH_IPT_CURLVL_REG);
}

/**
 * ab8500_charger_set_output_curr() - set charger output current
 * @di:         pointer to the ab8500_charger structure
 * @ich_out:    output charger current, in mA
 *
 * Set charger output current.
 * Returns error code in case of failure else 0(on success)
 */
static int ab8500_charger_set_output_curr(struct ab8500_charger *di,
        int ich_out)
{
        return ab8500_charger_set_current(di, ich_out,
                AB8500_CH_OPT_CRNTLVL_REG);
}

/**
 * ab8500_charger_led_en() - turn on/off chargign led
 * @di:         pointer to the ab8500_charger structure
 * @on:         flag to turn on/off the chargign led
 *
 * Power ON/OFF charging LED indication
 * Returns error code in case of failure else 0(on success)
 */
static int ab8500_charger_led_en(struct ab8500_charger *di, int on)
{
        int ret;

        if (on) {
                /* Power ON charging LED indicator, set LED current to 5mA */
                ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
                        AB8500_LED_INDICATOR_PWM_CTRL,
                        (LED_IND_CUR_5MA | LED_INDICATOR_PWM_ENA));
                if (ret) {
                        dev_err(di->dev, "Power ON LED failed\n");
                        return ret;
                }
                /* LED indicator PWM duty cycle 252/256 */
                ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
                        AB8500_LED_INDICATOR_PWM_DUTY,
                        LED_INDICATOR_PWM_DUTY_252_256);
                if (ret) {
                        dev_err(di->dev, "Set LED PWM duty cycle failed\n");
                        return ret;
                }
        } else {
                /* Power off charging LED indicator */
                ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
                        AB8500_LED_INDICATOR_PWM_CTRL,
                        LED_INDICATOR_PWM_DIS);
                if (ret) {
                        dev_err(di->dev, "Power-off LED failed\n");
                        return ret;
                }
        }

        return ret;
}

/**
 * ab8500_charger_ac_en() - enable or disable ac charging
 * @di:         pointer to the ab8500_charger structure
 * @enable:     enable/disable flag
 * @vset:       charging voltage
 * @iset:       charging current
 *
 * Enable/Disable AC/Mains charging and turns on/off the charging led
 * respectively.
 **/
static int ab8500_charger_ac_en(struct ux500_charger *charger,
        int enable, int vset, int iset)
{
        int ret;
        int volt_index;
        int curr_index;
        int input_curr_index;
        u8 overshoot = 0;

        struct ab8500_charger *di = to_ab8500_charger_ac_device_info(charger);

        if (enable) {
                /* Check if AC is connected */
                if (!di->ac.charger_connected) {
                        dev_err(di->dev, "AC charger not connected\n");
                        return -ENXIO;
                }

                /* Enable AC charging */
                dev_dbg(di->dev, "Enable AC: %dmV %dmA\n", vset, iset);

                /*
                 * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts
                 * will be triggered everytime we enable the VDD ADC supply.
                 * This will turn off charging for a short while.
                 * It can be avoided by having the supply on when
                 * there is a charger enabled. Normally the VDD ADC supply
                 * is enabled everytime a GPADC conversion is triggered. We will
                 * force it to be enabled from this driver to have
                 * the GPADC module independant of the AB8500 chargers
                 */
                if (!di->vddadc_en_ac) {
                        regulator_enable(di->regu);
                        di->vddadc_en_ac = true;
                }

                /* Check if the requested voltage or current is valid */
                volt_index = ab8500_voltage_to_regval(vset);
                curr_index = ab8500_current_to_regval(iset);
                input_curr_index = ab8500_current_to_regval(
                        di->bm->chg_params->ac_curr_max);
                if (volt_index < 0 || curr_index < 0 || input_curr_index < 0) {
                        dev_err(di->dev,
                                "Charger voltage or current too high, "
                                "charging not started\n");
                        return -ENXIO;
                }

                /* ChVoltLevel: maximum battery charging voltage */
                ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
                        AB8500_CH_VOLT_LVL_REG, (u8) volt_index);
                if (ret) {
                        dev_err(di->dev, "%s write failed\n", __func__);
                        return ret;
                }
                /* MainChInputCurr: current that can be drawn from the charger*/
                ret = ab8500_charger_set_main_in_curr(di,
                        di->bm->chg_params->ac_curr_max);
                if (ret) {
                        dev_err(di->dev, "%s Failed to set MainChInputCurr\n",
                                __func__);
                        return ret;
                }
                /* ChOutputCurentLevel: protected output current */
                ret = ab8500_charger_set_output_curr(di, iset);
                if (ret) {
                        dev_err(di->dev, "%s "
                                "Failed to set ChOutputCurentLevel\n",
                                __func__);
                        return ret;
                }

                /* Check if VBAT overshoot control should be enabled */
                if (!di->bm->enable_overshoot)
                        overshoot = MAIN_CH_NO_OVERSHOOT_ENA_N;

                /* Enable Main Charger */
                ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
                        AB8500_MCH_CTRL1, MAIN_CH_ENA | overshoot);
                if (ret) {
                        dev_err(di->dev, "%s write failed\n", __func__);
                        return ret;
                }

                /* Power on charging LED indication */
                ret = ab8500_charger_led_en(di, true);
                if (ret < 0)
                        dev_err(di->dev, "failed to enable LED\n");

                di->ac.charger_online = 1;
        } else {
                /* Disable AC charging */
                if (is_ab8500_1p1_or_earlier(di->parent)) {
                        /*
                         * For ABB revision 1.0 and 1.1 there is a bug in the
                         * watchdog logic. That means we have to continously
                         * kick the charger watchdog even when no charger is
                         * connected. This is only valid once the AC charger
                         * has been enabled. This is a bug that is not handled
                         * by the algorithm and the watchdog have to be kicked
                         * by the charger driver when the AC charger
                         * is disabled
                         */
                        if (di->ac_conn) {
                                queue_delayed_work(di->charger_wq,
                                        &di->kick_wd_work,
                                        round_jiffies(WD_KICK_INTERVAL));
                        }

                        /*
                         * We can't turn off charging completely
                         * due to a bug in AB8500 cut1.
                         * If we do, charging will not start again.
                         * That is why we set the lowest voltage
                         * and current possible
                         */
                        ret = abx500_set_register_interruptible(di->dev,
                                AB8500_CHARGER,
                                AB8500_CH_VOLT_LVL_REG, CH_VOL_LVL_3P5);
                        if (ret) {
                                dev_err(di->dev,
                                        "%s write failed\n", __func__);
                                return ret;
                        }

                        ret = ab8500_charger_set_output_curr(di, 0);
                        if (ret) {
                                dev_err(di->dev, "%s "
                                        "Failed to set ChOutputCurentLevel\n",
                                        __func__);
                                return ret;
                        }
                } else {
                        ret = abx500_set_register_interruptible(di->dev,
                                AB8500_CHARGER,
                                AB8500_MCH_CTRL1, 0);
                        if (ret) {
                                dev_err(di->dev,
                                        "%s write failed\n", __func__);
                                return ret;
                        }
                }

                ret = ab8500_charger_led_en(di, false);
                if (ret < 0)
                        dev_err(di->dev, "failed to disable LED\n");

                di->ac.charger_online = 0;
                di->ac.wd_expired = false;

                /* Disable regulator if enabled */
                if (di->vddadc_en_ac) {
                        regulator_disable(di->regu);
                        di->vddadc_en_ac = false;
                }

                dev_dbg(di->dev, "%s Disabled AC charging\n", __func__);
        }
        ab8500_power_supply_changed(di, &di->ac_chg.psy);

        return ret;
}

/**
 * ab8500_charger_usb_en() - enable usb charging
 * @di:         pointer to the ab8500_charger structure
 * @enable:     enable/disable flag
 * @vset:       charging voltage
 * @ich_out:    charger output current
 *
 * Enable/Disable USB charging and turns on/off the charging led respectively.
 * Returns error code in case of failure else 0(on success)
 */
static int ab8500_charger_usb_en(struct ux500_charger *charger,
        int enable, int vset, int ich_out)
{
        int ret;
        int volt_index;
        int curr_index;
        u8 overshoot = 0;

        struct ab8500_charger *di = to_ab8500_charger_usb_device_info(charger);

        if (enable) {
                /* Check if USB is connected */
                if (!di->usb.charger_connected) {
                        dev_err(di->dev, "USB charger not connected\n");
                        return -ENXIO;
                }

                /*
                 * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts
                 * will be triggered everytime we enable the VDD ADC supply.
                 * This will turn off charging for a short while.
                 * It can be avoided by having the supply on when
                 * there is a charger enabled. Normally the VDD ADC supply
                 * is enabled everytime a GPADC conversion is triggered. We will
                 * force it to be enabled from this driver to have
                 * the GPADC module independant of the AB8500 chargers
                 */
                if (!di->vddadc_en_usb) {
                        regulator_enable(di->regu);
                        di->vddadc_en_usb = true;
                }

                /* Enable USB charging */
                dev_dbg(di->dev, "Enable USB: %dmV %dmA\n", vset, ich_out);

                /* Check if the requested voltage or current is valid */
                volt_index = ab8500_voltage_to_regval(vset);
                curr_index = ab8500_current_to_regval(ich_out);
                if (volt_index < 0 || curr_index < 0) {
                        dev_err(di->dev,
                                "Charger voltage or current too high, "
                                "charging not started\n");
                        return -ENXIO;
                }

                /* ChVoltLevel: max voltage upto which battery can be charged */
                ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
                        AB8500_CH_VOLT_LVL_REG, (u8) volt_index);
                if (ret) {
                        dev_err(di->dev, "%s write failed\n", __func__);
                        return ret;
                }
                /* Check if VBAT overshoot control should be enabled */
                if (!di->bm->enable_overshoot)
                        overshoot = USB_CHG_NO_OVERSHOOT_ENA_N;

                /* Enable USB Charger */
                dev_dbg(di->dev,
                        "Enabling USB with write to AB8500_USBCH_CTRL1_REG\n");
                ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
                        AB8500_USBCH_CTRL1_REG, USB_CH_ENA | overshoot);
                if (ret) {
                        dev_err(di->dev, "%s write failed\n", __func__);
                        return ret;
                }

                /* If success power on charging LED indication */
                ret = ab8500_charger_led_en(di, true);
                if (ret < 0)
                        dev_err(di->dev, "failed to enable LED\n");

                di->usb.charger_online = 1;

                /* USBChInputCurr: current that can be drawn from the usb */
                ret = ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr);
                if (ret) {
                        dev_err(di->dev, "setting USBChInputCurr failed\n");
                        return ret;
                }

                /* ChOutputCurentLevel: protected output current */
                ret = ab8500_charger_set_output_curr(di, ich_out);
                if (ret) {
                        dev_err(di->dev, "%s "
                                "Failed to set ChOutputCurentLevel\n",
                                __func__);
                        return ret;
                }

                queue_delayed_work(di->charger_wq, &di->check_vbat_work, HZ);

        } else {
                /* Disable USB charging */
                dev_dbg(di->dev, "%s Disabled USB charging\n", __func__);
                ret = abx500_set_register_interruptible(di->dev,
                        AB8500_CHARGER,
                        AB8500_USBCH_CTRL1_REG, 0);
                if (ret) {
                        dev_err(di->dev,
                                "%s write failed\n", __func__);
                        return ret;
                }

                ret = ab8500_charger_led_en(di, false);
                if (ret < 0)
                        dev_err(di->dev, "failed to disable LED\n");
                /* USBChInputCurr: current that can be drawn from the usb */
                ret = ab8500_charger_set_vbus_in_curr(di, 0);
                if (ret) {
                        dev_err(di->dev, "setting USBChInputCurr failed\n");
                        return ret;
                }

                /* ChOutputCurentLevel: protected output current */
                ret = ab8500_charger_set_output_curr(di, 0);
                if (ret) {
                        dev_err(di->dev, "%s "
                                "Failed to reset ChOutputCurentLevel\n",
                                __func__);
                        return ret;
                }
                di->usb.charger_online = 0;
                di->usb.wd_expired = false;

                /* Disable regulator if enabled */
                if (di->vddadc_en_usb) {
                        regulator_disable(di->regu);
                        di->vddadc_en_usb = false;
                }

                dev_dbg(di->dev, "%s Disabled USB charging\n", __func__);

                /* Cancel any pending Vbat check work */
                if (delayed_work_pending(&di->check_vbat_work))
                        cancel_delayed_work(&di->check_vbat_work);

        }
        ab8500_power_supply_changed(di, &di->usb_chg.psy);

        return ret;
}

/**
 * ab8500_charger_watchdog_kick() - kick charger watchdog
 * @di:         pointer to the ab8500_charger structure
 *
 * Kick charger watchdog
 * Returns error code in case of failure else 0(on success)
 */
static int ab8500_charger_watchdog_kick(struct ux500_charger *charger)
{
        int ret;
        struct ab8500_charger *di;

        if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS)
                di = to_ab8500_charger_ac_device_info(charger);
        else if (charger->psy.type == POWER_SUPPLY_TYPE_USB)
                di = to_ab8500_charger_usb_device_info(charger);
        else
                return -ENXIO;

        ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
                AB8500_CHARG_WD_CTRL, CHARG_WD_KICK);
        if (ret)
                dev_err(di->dev, "Failed to kick WD!\n");

        return ret;
}

/**
 * ab8500_charger_update_charger_current() - update charger current
 * @di:         pointer to the ab8500_charger structure
 *
 * Update the charger output current for the specified charger
 * Returns error code in case of failure else 0(on success)
 */
static int ab8500_charger_update_charger_current(struct ux500_charger *charger,
                int ich_out)
{
        int ret;
        struct ab8500_charger *di;

        if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS)
                di = to_ab8500_charger_ac_device_info(charger);
        else if (charger->psy.type == POWER_SUPPLY_TYPE_USB)
                di = to_ab8500_charger_usb_device_info(charger);
        else
                return -ENXIO;

        ret = ab8500_charger_set_output_curr(di, ich_out);
        if (ret) {
                dev_err(di->dev, "%s "
                        "Failed to set ChOutputCurentLevel\n",
                        __func__);
                return ret;
        }

        /* Reset the main and usb drop input current measurement counter */
        ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
                                AB8500_CHARGER_CTRL,
                                0x1);
        if (ret) {
                dev_err(di->dev, "%s write failed\n", __func__);
                return ret;
        }

        return ret;
}

static int ab8500_charger_get_ext_psy_data(struct device *dev, void *data)
{
        struct power_supply *psy;
        struct power_supply *ext;
        struct ab8500_charger *di;
        union power_supply_propval ret;
        int i, j;
        bool psy_found = false;
        struct ux500_charger *usb_chg;

        usb_chg = (struct ux500_charger *)data;
        psy = &usb_chg->psy;

        di = to_ab8500_charger_usb_device_info(usb_chg);

        ext = dev_get_drvdata(dev);

        /* For all psy where the driver name appears in any supplied_to */
        for (i = 0; i < ext->num_supplicants; i++) {
                if (!strcmp(ext->supplied_to[i], psy->name))
                        psy_found = true;
        }

        if (!psy_found)
                return 0;

        /* Go through all properties for the psy */
        for (j = 0; j < ext->num_properties; j++) {
                enum power_supply_property prop;
                prop = ext->properties[j];

                if (ext->get_property(ext, prop, &ret))
                        continue;

                switch (prop) {
                case POWER_SUPPLY_PROP_VOLTAGE_NOW:
                        switch (ext->type) {
                        case POWER_SUPPLY_TYPE_BATTERY:
                                di->vbat = ret.intval / 1000;
                                break;
                        default:
                                break;
                        }
                        break;
                default:
                        break;
                }
        }
        return 0;
}

/**
 * ab8500_charger_check_vbat_work() - keep vbus current within spec
 * @work        pointer to the work_struct structure
 *
 * Due to a asic bug it is necessary to lower the input current to the vbus
 * charger when charging with at some specific levels. This issue is only valid
 * for below a certain battery voltage. This function makes sure that the
 * the allowed current limit isn't exceeded.
 */
static void ab8500_charger_check_vbat_work(struct work_struct *work)
{
        int t = 10;
        struct ab8500_charger *di = container_of(work,
                struct ab8500_charger, check_vbat_work.work);

        class_for_each_device(power_supply_class, NULL,
                &di->usb_chg.psy, ab8500_charger_get_ext_psy_data);

        /* First run old_vbat is 0. */
        if (di->old_vbat == 0)
                di->old_vbat = di->vbat;

        if (!((di->old_vbat <= VBAT_TRESH_IP_CUR_RED &&
                di->vbat <= VBAT_TRESH_IP_CUR_RED) ||
                (di->old_vbat > VBAT_TRESH_IP_CUR_RED &&
                di->vbat > VBAT_TRESH_IP_CUR_RED))) {

                dev_dbg(di->dev, "Vbat did cross threshold, curr: %d, new: %d,"
                        " old: %d\n", di->max_usb_in_curr, di->vbat,
                        di->old_vbat);
                ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr);
                power_supply_changed(&di->usb_chg.psy);
        }

        di->old_vbat = di->vbat;

        /*
         * No need to check the battery voltage every second when not close to
         * the threshold.
         */
        if (di->vbat < (VBAT_TRESH_IP_CUR_RED + 100) &&
                (di->vbat > (VBAT_TRESH_IP_CUR_RED - 100)))
                        t = 1;

        queue_delayed_work(di->charger_wq, &di->check_vbat_work, t * HZ);
}

/**
 * ab8500_charger_check_hw_failure_work() - check main charger failure
 * @work:       pointer to the work_struct structure
 *
 * Work queue function for checking the main charger status
 */
static void ab8500_charger_check_hw_failure_work(struct work_struct *work)
{
        int ret;
        u8 reg_value;

        struct ab8500_charger *di = container_of(work,
                struct ab8500_charger, check_hw_failure_work.work);

        /* Check if the status bits for HW failure is still active */
        if (di->flags.mainextchnotok) {
                ret = abx500_get_register_interruptible(di->dev,
                        AB8500_CHARGER, AB8500_CH_STATUS2_REG, &reg_value);
                if (ret < 0) {
                        dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                        return;
                }
                if (!(reg_value & MAIN_CH_NOK)) {
                        di->flags.mainextchnotok = false;
                        ab8500_power_supply_changed(di, &di->ac_chg.psy);
                }
        }
        if (di->flags.vbus_ovv) {
                ret = abx500_get_register_interruptible(di->dev,
                        AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG,
                        &reg_value);
                if (ret < 0) {
                        dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                        return;
                }
                if (!(reg_value & VBUS_OVV_TH)) {
                        di->flags.vbus_ovv = false;
                        ab8500_power_supply_changed(di, &di->usb_chg.psy);
                }
        }
        /* If we still have a failure, schedule a new check */
        if (di->flags.mainextchnotok || di->flags.vbus_ovv) {
                queue_delayed_work(di->charger_wq,
                        &di->check_hw_failure_work, round_jiffies(HZ));
        }
}

/**
 * ab8500_charger_kick_watchdog_work() - kick the watchdog
 * @work:       pointer to the work_struct structure
 *
 * Work queue function for kicking the charger watchdog.
 *
 * For ABB revision 1.0 and 1.1 there is a bug in the watchdog
 * logic. That means we have to continously kick the charger
 * watchdog even when no charger is connected. This is only
 * valid once the AC charger has been enabled. This is
 * a bug that is not handled by the algorithm and the
 * watchdog have to be kicked by the charger driver
 * when the AC charger is disabled
 */
static void ab8500_charger_kick_watchdog_work(struct work_struct *work)
{
        int ret;

        struct ab8500_charger *di = container_of(work,
                struct ab8500_charger, kick_wd_work.work);

        ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
                AB8500_CHARG_WD_CTRL, CHARG_WD_KICK);
        if (ret)
                dev_err(di->dev, "Failed to kick WD!\n");

        /* Schedule a new watchdog kick */
        queue_delayed_work(di->charger_wq,
                &di->kick_wd_work, round_jiffies(WD_KICK_INTERVAL));
}

/**
 * ab8500_charger_ac_work() - work to get and set main charger status
 * @work:       pointer to the work_struct structure
 *
 * Work queue function for checking the main charger status
 */
static void ab8500_charger_ac_work(struct work_struct *work)
{
        int ret;

        struct ab8500_charger *di = container_of(work,
                struct ab8500_charger, ac_work);

        /*
         * Since we can't be sure that the events are received
         * synchronously, we have the check if the main charger is
         * connected by reading the status register
         */
        ret = ab8500_charger_detect_chargers(di, false);
        if (ret < 0)
                return;

        if (ret & AC_PW_CONN) {
                di->ac.charger_connected = 1;
                di->ac_conn = true;
        } else {
                di->ac.charger_connected = 0;
        }

        ab8500_power_supply_changed(di, &di->ac_chg.psy);
        sysfs_notify(&di->ac_chg.psy.dev->kobj, NULL, "present");
}

static void ab8500_charger_usb_attached_work(struct work_struct *work)
{
        struct ab8500_charger *di = container_of(work,
                                                 struct ab8500_charger,
                                                 usb_charger_attached_work.work);
        int usbch = (USB_CH_VBUSDROP | USB_CH_VBUSDETDBNC);
        int ret, i;
        u8 statval;

        for (i = 0; i < 10; i++) {
                ret = abx500_get_register_interruptible(di->dev,
                                                        AB8500_CHARGER,
                                                        AB8500_CH_USBCH_STAT1_REG,
                                                        &statval);
                if (ret < 0) {
                        dev_err(di->dev, "ab8500 read failed %d\n", __LINE__);
                        goto reschedule;
                }
                if ((statval & usbch) != usbch)
                        goto reschedule;

                msleep(CHARGER_STATUS_POLL);
        }

        ab8500_charger_usb_en(&di->usb_chg, 0, 0, 0);

        mutex_lock(&di->charger_attached_mutex);
        mutex_unlock(&di->charger_attached_mutex);

        return;

reschedule:
        queue_delayed_work(di->charger_wq,
                           &di->usb_charger_attached_work,
                           HZ);
}

static void ab8500_charger_ac_attached_work(struct work_struct *work)
{

        struct ab8500_charger *di = container_of(work,
                                                 struct ab8500_charger,
                                                 ac_charger_attached_work.work);
        int mainch = (MAIN_CH_STATUS2_MAINCHGDROP |
                      MAIN_CH_STATUS2_MAINCHARGERDETDBNC);

        int ret, i;
        u8 statval;

        for (i = 0; i < 10; i++) {
                ret = abx500_get_register_interruptible(di->dev,
                                                        AB8500_CHARGER,
                                                        AB8500_CH_STATUS2_REG,
                                                        &statval);
                if (ret < 0) {
                        dev_err(di->dev, "ab8500 read failed %d\n", __LINE__);
                        goto reschedule;
                }

                if ((statval & mainch) != mainch)
                        goto reschedule;

                msleep(CHARGER_STATUS_POLL);
        }

        ab8500_charger_ac_en(&di->ac_chg, 0, 0, 0);
        queue_work(di->charger_wq, &di->ac_work);

        mutex_lock(&di->charger_attached_mutex);
        mutex_unlock(&di->charger_attached_mutex);

        return;

reschedule:
        queue_delayed_work(di->charger_wq,
                           &di->ac_charger_attached_work,
                           HZ);
}

/**
 * ab8500_charger_detect_usb_type_work() - work to detect USB type
 * @work:       Pointer to the work_struct structure
 *
 * Detect the type of USB plugged
 */
static void ab8500_charger_detect_usb_type_work(struct work_struct *work)
{
        int ret;

        struct ab8500_charger *di = container_of(work,
                struct ab8500_charger, detect_usb_type_work);

        /*
         * Since we can't be sure that the events are received
         * synchronously, we have the check if is
         * connected by reading the status register
         */
        ret = ab8500_charger_detect_chargers(di, false);
        if (ret < 0)
                return;

        if (!(ret & USB_PW_CONN)) {
                dev_dbg(di->dev, "%s di->vbus_detected = false\n", __func__);
                di->vbus_detected = false;
                ab8500_charger_set_usb_connected(di, false);
                ab8500_power_supply_changed(di, &di->usb_chg.psy);
        } else {
                dev_dbg(di->dev, "%s di->vbus_detected = true\n", __func__);
                di->vbus_detected = true;

                if (is_ab8500_1p1_or_earlier(di->parent)) {
                        ret = ab8500_charger_detect_usb_type(di);
                        if (!ret) {
                                ab8500_charger_set_usb_connected(di, true);
                                ab8500_power_supply_changed(di,
                                                            &di->usb_chg.psy);
                        }
                } else {
                        /*
                         * For ABB cut2.0 and onwards we have an IRQ,
                         * USB_LINK_STATUS that will be triggered when the USB
                         * link status changes. The exception is USB connected
                         * during startup. Then we don't get a
                         * USB_LINK_STATUS IRQ
                         */
                        if (di->vbus_detected_start) {
                                di->vbus_detected_start = false;
                                ret = ab8500_charger_detect_usb_type(di);
                                if (!ret) {
                                        ab8500_charger_set_usb_connected(di,
                                                true);
                                        ab8500_power_supply_changed(di,
                                                &di->usb_chg.psy);
                                }
                        }
                }
        }
}

/**
 * ab8500_charger_usb_link_attach_work() - work to detect USB type
 * @work:       pointer to the work_struct structure
 *
 * Detect the type of USB plugged
 */
static void ab8500_charger_usb_link_attach_work(struct work_struct *work)
{
        struct ab8500_charger *di =
                container_of(work, struct ab8500_charger, attach_work.work);
        int ret;

        /* Update maximum input current if USB enumeration is not detected */
        if (!di->usb.charger_online) {
                ret = ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr);
                if (ret)
                        return;
        }

        ab8500_charger_set_usb_connected(di, true);
        ab8500_power_supply_changed(di, &di->usb_chg.psy);
}

/**
 * ab8500_charger_usb_link_status_work() - work to detect USB type
 * @work:       pointer to the work_struct structure
 *
 * Detect the type of USB plugged
 */
static void ab8500_charger_usb_link_status_work(struct work_struct *work)
{
        int detected_chargers;
        int ret;
        u8 val;

        struct ab8500_charger *di = container_of(work,
                struct ab8500_charger, usb_link_status_work);

        /*
         * Since we can't be sure that the events are received
         * synchronously, we have the check if  is
         * connected by reading the status register
         */
        detected_chargers = ab8500_charger_detect_chargers(di, false);
        if (detected_chargers < 0)
                return;

        /*
         * Some chargers that breaks the USB spec is
         * identified as invalid by AB8500 and it refuse
         * to start the charging process. but by jumping
         * thru a few hoops it can be forced to start.
         */
        ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
                        AB8500_USB_LINE_STAT_REG, &val);
        if (ret >= 0)
                dev_dbg(di->dev, "UsbLineStatus register = 0x%02x\n", val);
        else
                dev_dbg(di->dev, "Error reading USB link status\n");

        if (detected_chargers & USB_PW_CONN) {
                if (((val & AB8500_USB_LINK_STATUS) >> 3) == USB_STAT_NOT_VALID_LINK &&
                                di->invalid_charger_detect_state == 0) {
                        dev_dbg(di->dev, "Invalid charger detected, state= 0\n");
                        /*Enable charger*/
                        abx500_mask_and_set_register_interruptible(di->dev,
                                        AB8500_CHARGER, AB8500_USBCH_CTRL1_REG, 0x01, 0x01);
                        /*Enable charger detection*/
                        abx500_mask_and_set_register_interruptible(di->dev, AB8500_USB,
                                        AB8500_MCH_IPT_CURLVL_REG, 0x01, 0x01);
                        di->invalid_charger_detect_state = 1;
                        /*exit and wait for new link status interrupt.*/
                        return;

                }
                if (di->invalid_charger_detect_state == 1) {
                        dev_dbg(di->dev, "Invalid charger detected, state= 1\n");
                        /*Stop charger detection*/
                        abx500_mask_and_set_register_interruptible(di->dev, AB8500_USB,
                                        AB8500_MCH_IPT_CURLVL_REG, 0x01, 0x00);
                        /*Check link status*/
                        ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
                                        AB8500_USB_LINE_STAT_REG, &val);
                        dev_dbg(di->dev, "USB link status= 0x%02x\n",
                                        (val & AB8500_USB_LINK_STATUS) >> 3);
                        di->invalid_charger_detect_state = 2;
                }
        } else {
                di->invalid_charger_detect_state = 0;
        }

        if (!(detected_chargers & USB_PW_CONN)) {
                di->vbus_detected = false;
                ab8500_charger_set_usb_connected(di, false);
                ab8500_power_supply_changed(di, &di->usb_chg.psy);
                return;
        }

        dev_dbg(di->dev,"%s di->vbus_detected = true\n",__func__);
        di->vbus_detected = true;
        ret = ab8500_charger_read_usb_type(di);
        if (ret) {
                if (ret == -ENXIO) {
                        /* No valid charger type detected */
                        ab8500_charger_set_usb_connected(di, false);
                        ab8500_power_supply_changed(di, &di->usb_chg.psy);
                }
                return;
        }

        if (di->usb_device_is_unrecognised) {
                dev_dbg(di->dev,
                        "Potential Legacy Charger device. "
                        "Delay work for %d msec for USB enum "
                        "to finish",
                        WAIT_ACA_RID_ENUMERATION);
                queue_delayed_work(di->charger_wq,
                                   &di->attach_work,
                                   msecs_to_jiffies(WAIT_ACA_RID_ENUMERATION));
        } else if (di->is_aca_rid == 1) {
                /* Only wait once */
                di->is_aca_rid++;
                dev_dbg(di->dev,
                        "%s Wait %d msec for USB enum to finish",
                        __func__, WAIT_ACA_RID_ENUMERATION);
                queue_delayed_work(di->charger_wq,
                                   &di->attach_work,
                                   msecs_to_jiffies(WAIT_ACA_RID_ENUMERATION));
        } else {
                queue_delayed_work(di->charger_wq,
                                   &di->attach_work,
                                   0);
        }
}

static void ab8500_charger_usb_state_changed_work(struct work_struct *work)
{
        int ret;
        unsigned long flags;

        struct ab8500_charger *di = container_of(work,
                struct ab8500_charger, usb_state_changed_work.work);

        if (!di->vbus_detected) {
                dev_dbg(di->dev,
                        "%s !di->vbus_detected\n",
                        __func__);
                return;
        }

        spin_lock_irqsave(&di->usb_state.usb_lock, flags);
        di->usb_state.state = di->usb_state.state_tmp;
        di->usb_state.usb_current = di->usb_state.usb_current_tmp;
        spin_unlock_irqrestore(&di->usb_state.usb_lock, flags);

        dev_dbg(di->dev, "%s USB state: 0x%02x mA: %d\n",
                __func__, di->usb_state.state, di->usb_state.usb_current);

        switch (di->usb_state.state) {
        case AB8500_BM_USB_STATE_RESET_HS:
        case AB8500_BM_USB_STATE_RESET_FS:
        case AB8500_BM_USB_STATE_SUSPEND:
        case AB8500_BM_USB_STATE_MAX:
                ab8500_charger_set_usb_connected(di, false);
                ab8500_power_supply_changed(di, &di->usb_chg.psy);
                break;

        case AB8500_BM_USB_STATE_RESUME:
                /*
                 * when suspend->resume there should be delay
                 * of 1sec for enabling charging
                 */
                msleep(1000);
                /* Intentional fall through */
        case AB8500_BM_USB_STATE_CONFIGURED:
                /*
                 * USB is configured, enable charging with the charging
                 * input current obtained from USB driver
                 */
                if (!ab8500_charger_get_usb_cur(di)) {
                        /* Update maximum input current */
                        ret = ab8500_charger_set_vbus_in_curr(di,
                                        di->max_usb_in_curr);
                        if (ret)
                                return;

                        ab8500_charger_set_usb_connected(di, true);
                        ab8500_power_supply_changed(di, &di->usb_chg.psy);
                }
                break;

        default:
                break;
        };
}

/**
 * ab8500_charger_check_usbchargernotok_work() - check USB chg not ok status
 * @work:       pointer to the work_struct structure
 *
 * Work queue function for checking the USB charger Not OK status
 */
static void ab8500_charger_check_usbchargernotok_work(struct work_struct *work)
{
        int ret;
        u8 reg_value;
        bool prev_status;

        struct ab8500_charger *di = container_of(work,
                struct ab8500_charger, check_usbchgnotok_work.work);

        /* Check if the status bit for usbchargernotok is still active */
        ret = abx500_get_register_interruptible(di->dev,
                AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, &reg_value);
        if (ret < 0) {
                dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                return;
        }
        prev_status = di->flags.usbchargernotok;

        if (reg_value & VBUS_CH_NOK) {
                di->flags.usbchargernotok = true;
                /* Check again in 1sec */
                queue_delayed_work(di->charger_wq,
                        &di->check_usbchgnotok_work, HZ);
        } else {
                di->flags.usbchargernotok = false;
                di->flags.vbus_collapse = false;
        }

        if (prev_status != di->flags.usbchargernotok)
                ab8500_power_supply_changed(di, &di->usb_chg.psy);
}

/**
 * ab8500_charger_check_main_thermal_prot_work() - check main thermal status
 * @work:       pointer to the work_struct structure
 *
 * Work queue function for checking the Main thermal prot status
 */
static void ab8500_charger_check_main_thermal_prot_work(
        struct work_struct *work)
{
        int ret;
        u8 reg_value;

        struct ab8500_charger *di = container_of(work,
                struct ab8500_charger, check_main_thermal_prot_work);

        /* Check if the status bit for main_thermal_prot is still active */
        ret = abx500_get_register_interruptible(di->dev,
                AB8500_CHARGER, AB8500_CH_STATUS2_REG, &reg_value);
        if (ret < 0) {
                dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                return;
        }
        if (reg_value & MAIN_CH_TH_PROT)
                di->flags.main_thermal_prot = true;
        else
                di->flags.main_thermal_prot = false;

        ab8500_power_supply_changed(di, &di->ac_chg.psy);
}

/**
 * ab8500_charger_check_usb_thermal_prot_work() - check usb thermal status
 * @work:       pointer to the work_struct structure
 *
 * Work queue function for checking the USB thermal prot status
 */
static void ab8500_charger_check_usb_thermal_prot_work(
        struct work_struct *work)
{
        int ret;
        u8 reg_value;

        struct ab8500_charger *di = container_of(work,
                struct ab8500_charger, check_usb_thermal_prot_work);

        /* Check if the status bit for usb_thermal_prot is still active */
        ret = abx500_get_register_interruptible(di->dev,
                AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, &reg_value);
        if (ret < 0) {
                dev_err(di->dev, "%s ab8500 read failed\n", __func__);
                return;
        }
        if (reg_value & USB_CH_TH_PROT)
                di->flags.usb_thermal_prot = true;
        else
                di->flags.usb_thermal_prot = false;

        ab8500_power_supply_changed(di, &di->usb_chg.psy);
}

/**
 * ab8500_charger_mainchunplugdet_handler() - main charger unplugged
 * @irq:       interrupt number
 * @_di:       pointer to the ab8500_charger structure
 *
 * Returns IRQ status(IRQ_HANDLED)
 */
static irqreturn_t ab8500_charger_mainchunplugdet_handler(int irq, void *_di)
{
        struct ab8500_charger *di = _di;

        dev_dbg(di->dev, "Main charger unplugged\n");
        queue_work(di->charger_wq, &di->ac_work);

        cancel_delayed_work_sync(&di->ac_charger_attached_work);
        mutex_lock(&di->charger_attached_mutex);
        mutex_unlock(&di->charger_attached_mutex);

        return IRQ_HANDLED;
}

/**
 * ab8500_charger_mainchplugdet_handler() - main charger plugged
 * @irq:       interrupt number
 * @_di:       pointer to the ab8500_charger structure
 *
 * Returns IRQ status(IRQ_HANDLED)
 */
static irqreturn_t ab8500_charger_mainchplugdet_handler(int irq, void *_di)
{
        struct ab8500_charger *di = _di;

        dev_dbg(di->dev, "Main charger plugged\n");
        queue_work(di->charger_wq, &di->ac_work);

        mutex_lock(&di->charger_attached_mutex);
        mutex_unlock(&di->charger_attached_mutex);
        queue_delayed_work(di->charger_wq,
                           &di->ac_charger_attached_work,
                           HZ);
        return IRQ_HANDLED;
}

/**
 * ab8500_charger_mainextchnotok_handler() - main charger not ok
 * @irq:       interrupt number
 * @_di:       pointer to the ab8500_charger structure
 *
 * Returns IRQ status(IRQ_HANDLED)
 */
static irqreturn_t ab8500_charger_mainextchnotok_handler(int irq, void *_di)
{
        struct ab8500_charger *di = _di;

        dev_dbg(di->dev, "Main charger not ok\n");
        di->flags.mainextchnotok = true;
        ab8500_power_supply_changed(di, &di->ac_chg.psy);

        /* Schedule a new HW failure check */
        queue_delayed_work(di->charger_wq, &di->check_hw_failure_work, 0);

        return IRQ_HANDLED;
}

/**
 * ab8500_charger_mainchthprotr_handler() - Die temp is above main charger
 * thermal protection threshold
 * @irq:       interrupt number
 * @_di:       pointer to the ab8500_charger structure
 *
 * Returns IRQ status(IRQ_HANDLED)
 */
static irqreturn_t ab8500_charger_mainchthprotr_handler(int irq, void *_di)
{
        struct ab8500_charger *di = _di;

        dev_dbg(di->dev,
                "Die temp above Main charger thermal protection threshold\n");
        queue_work(di->charger_wq, &di->check_main_thermal_prot_work);

        return IRQ_HANDLED;
}

/**
 * ab8500_charger_mainchthprotf_handler() - Die temp is below main charger
 * thermal protection threshold
 * @irq:       interrupt number
 * @_di:       pointer to the ab8500_charger structure
 *
 * Returns IRQ status(IRQ_HANDLED)
 */
static irqreturn_t ab8500_charger_mainchthprotf_handler(int irq, void *_di)
{
        struct ab8500_charger *di = _di;

        dev_dbg(di->dev,
                "Die temp ok for Main charger thermal protection threshold\n");
        queue_work(di->charger_wq, &di->check_main_thermal_prot_work);

        return IRQ_HANDLED;
}

static void ab8500_charger_vbus_drop_end_work(struct work_struct *work)
{
        struct ab8500_charger *di = container_of(work,
                struct ab8500_charger, vbus_drop_end_work.work);

        di->flags.vbus_drop_end = false;

        /* Reset the drop counter */
        abx500_set_register_interruptible(di->dev,
                                  AB8500_CHARGER, AB8500_CHARGER_CTRL, 0x01);

        if (di->usb.charger_connected)
                ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr);
}

/**
 * ab8500_charger_vbusdetf_handler() - VBUS falling detected
 * @irq:       interrupt number
 * @_di:       pointer to the ab8500_charger structure
 *
 * Returns IRQ status(IRQ_HANDLED)
 */
static irqreturn_t ab8500_charger_vbusdetf_handler(int irq, void *_di)
{
        struct ab8500_charger *di = _di;

        di->vbus_detected = false;
        dev_dbg(di->dev, "VBUS falling detected\n");
        queue_work(di->charger_wq, &di->detect_usb_type_work);

        return IRQ_HANDLED;
}

/**
 * ab8500_charger_vbusdetr_handler() - VBUS rising detected
 * @irq:       interrupt number
 * @_di:       pointer to the ab8500_charger structure
 *
 * Returns IRQ status(IRQ_HANDLED)
 */
static irqreturn_t ab8500_charger_vbusdetr_handler(int irq, void *_di)
{
        struct ab8500_charger *di = _di;

        di->vbus_detected = true;
        dev_dbg(di->dev, "VBUS rising detected\n");

        queue_work(di->charger_wq, &di->detect_usb_type_work);

        return IRQ_HANDLED;
}

/**
 * ab8500_charger_usblinkstatus_handler() - USB link status has changed
 * @irq:       interrupt number
 * @_di:       pointer to the ab8500_charger structure
 *
 * Returns IRQ status(IRQ_HANDLED)
 */
static irqreturn_t ab8500_charger_usblinkstatus_handler(int irq, void *_di)
{
        struct ab8500_charger *di = _di;

        dev_dbg(di->dev, "USB link status changed\n");

        queue_work(di->charger_wq, &di->usb_link_status_work);

        return IRQ_HANDLED;
}

/**
 * ab8500_charger_usbchthprotr_handler() - Die temp is above usb charger
 * thermal protection threshold
 * @irq:       interrupt number
 * @_di:       pointer to the ab8500_charger structure
 *
 * Returns IRQ status(IRQ_HANDLED)
 */
static irqreturn_t ab8500_charger_usbchthprotr_handler(int irq, void *_di)
{
        struct ab8500_charger *di = _di;

        dev_dbg(di->dev,
                "Die temp above USB charger thermal protection threshold\n");
        queue_work(di->charger_wq, &di->check_usb_thermal_prot_work);

        return IRQ_HANDLED;
}

/**
 * ab8500_charger_usbchthprotf_handler() - Die temp is below usb charger
 * thermal protection threshold
 * @irq:       interrupt number
 * @_di:       pointer to the ab8500_charger structure
 *
 * Returns IRQ status(IRQ_HANDLED)
 */
static irqreturn_t ab8500_charger_usbchthprotf_handler(int irq, void *_di)
{
        struct ab8500_charger *di = _di;

        dev_dbg(di->dev,
                "Die temp ok for USB charger thermal protection threshold\n");
        queue_work(di->charger_wq, &di->check_usb_thermal_prot_work);

        return IRQ_HANDLED;
}

/**
 * ab8500_charger_usbchargernotokr_handler() - USB charger not ok detected
 * @irq:       interrupt number
 * @_di:       pointer to the ab8500_charger structure
 *
 * Returns IRQ status(IRQ_HANDLED)
 */
static irqreturn_t ab8500_charger_usbchargernotokr_handler(int irq, void *_di)
{
        struct ab8500_charger *di = _di;

        dev_dbg(di->dev, "Not allowed USB charger detected\n");
        queue_delayed_work(di->charger_wq, &di->check_usbchgnotok_work, 0);

        return IRQ_HANDLED;
}

/**
 * ab8500_charger_chwdexp_handler() - Charger watchdog expired
 * @irq:       interrupt number
 * @_di:       pointer to the ab8500_charger structure
 *
 * Returns IRQ status(IRQ_HANDLED)
 */
static irqreturn_t ab8500_charger_chwdexp_handler(int irq, void *_di)
{
        struct ab8500_charger *di = _di;

        dev_dbg(di->dev, "Charger watchdog expired\n");

        /*
         * The charger that was online when the watchdog expired
         * needs to be restarted for charging to start again
         */
        if (di->ac.charger_online) {
                di->ac.wd_expired = true;
                ab8500_power_supply_changed(di, &di->ac_chg.psy);
        }
        if (di->usb.charger_online) {
                di->usb.wd_expired = true;
                ab8500_power_supply_changed(di, &di->usb_chg.psy);
        }

        return IRQ_HANDLED;
}

/**
 * ab8500_charger_vbuschdropend_handler() - VBUS drop removed
 * @irq:       interrupt number
 * @_di:       pointer to the ab8500_charger structure
 *
 * Returns IRQ status(IRQ_HANDLED)
 */
static irqreturn_t ab8500_charger_vbuschdropend_handler(int irq, void *_di)
{
        struct ab8500_charger *di = _di;

        dev_dbg(di->dev, "VBUS charger drop ended\n");
        di->flags.vbus_drop_end = true;
        queue_delayed_work(di->charger_wq, &di->vbus_drop_end_work,
                           round_jiffies(30 * HZ));

        return IRQ_HANDLED;
}

/**
 * ab8500_charger_vbusovv_handler() - VBUS overvoltage detected
 * @irq:       interrupt number
 * @_di:       pointer to the ab8500_charger structure
 *
 * Returns IRQ status(IRQ_HANDLED)
 */
static irqreturn_t ab8500_charger_vbusovv_handler(int irq, void *_di)
{
        struct ab8500_charger *di = _di;

        dev_dbg(di->dev, "VBUS overvoltage detected\n");
        di->flags.vbus_ovv = true;
        ab8500_power_supply_changed(di, &di->usb_chg.psy);

        /* Schedule a new HW failure check */
        queue_delayed_work(di->charger_wq, &di->check_hw_failure_work, 0);

        return IRQ_HANDLED;
}

/**
 * ab8500_charger_ac_get_property() - get the ac/mains properties
 * @psy:       pointer to the power_supply structure
 * @psp:       pointer to the power_supply_property structure
 * @val:       pointer to the power_supply_propval union
 *
 * This function gets called when an application tries to get the ac/mains
 * properties by reading the sysfs files.
 * AC/Mains properties are online, present and voltage.
 * online:     ac/mains charging is in progress or not
 * present:    presence of the ac/mains
 * voltage:    AC/Mains voltage
 * Returns error code in case of failure else 0(on success)
 */
static int ab8500_charger_ac_get_property(struct power_supply *psy,
        enum power_supply_property psp,
        union power_supply_propval *val)
{
        struct ab8500_charger *di;
        int ret;

        di = to_ab8500_charger_ac_device_info(psy_to_ux500_charger(psy));

        switch (psp) {
        case POWER_SUPPLY_PROP_HEALTH:
                if (di->flags.mainextchnotok)
                        val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
                else if (di->ac.wd_expired || di->usb.wd_expired)
                        val->intval = POWER_SUPPLY_HEALTH_DEAD;
                else if (di->flags.main_thermal_prot)
                        val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
                else
                        val->intval = POWER_SUPPLY_HEALTH_GOOD;
                break;
        case POWER_SUPPLY_PROP_ONLINE:
                val->intval = di->ac.charger_online;
                break;
        case POWER_SUPPLY_PROP_PRESENT:
                val->intval = di->ac.charger_connected;
                break;
        case POWER_SUPPLY_PROP_VOLTAGE_NOW:
                ret = ab8500_charger_get_ac_voltage(di);
                if (ret >= 0)
                        di->ac.charger_voltage = ret;
                /* On error, use previous value */
                val->intval = di->ac.charger_voltage * 1000;
                break;
        case POWER_SUPPLY_PROP_VOLTAGE_AVG:
                /*
                 * This property is used to indicate when CV mode is entered
                 * for the AC charger
                 */
                di->ac.cv_active = ab8500_charger_ac_cv(di);
                val->intval = di->ac.cv_active;
                break;
        case POWER_SUPPLY_PROP_CURRENT_NOW:
                ret = ab8500_charger_get_ac_current(di);
                if (ret >= 0)
                        di->ac.charger_current = ret;
                val->intval = di->ac.charger_current * 1000;
                break;
        default:
                return -EINVAL;
        }
        return 0;
}

/**
 * ab8500_charger_usb_get_property() - get the usb properties
 * @psy:        pointer to the power_supply structure
 * @psp:        pointer to the power_supply_property structure
 * @val:        pointer to the power_supply_propval union
 *
 * This function gets called when an application tries to get the usb
 * properties by reading the sysfs files.
 * USB properties are online, present and voltage.
 * online:     usb charging is in progress or not
 * present:    presence of the usb
 * voltage:    vbus voltage
 * Returns error code in case of failure else 0(on success)
 */
static int ab8500_charger_usb_get_property(struct power_supply *psy,
        enum power_supply_property psp,
        union power_supply_propval *val)
{
        struct ab8500_charger *di;
        int ret;

        di = to_ab8500_charger_usb_device_info(psy_to_ux500_charger(psy));

        switch (psp) {
        case POWER_SUPPLY_PROP_HEALTH:
                if (di->flags.usbchargernotok)
                        val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
                else if (di->ac.wd_expired || di->usb.wd_expired)
                        val->intval = POWER_SUPPLY_HEALTH_DEAD;
                else if (di->flags.usb_thermal_prot)
                        val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
                else if (di->flags.vbus_ovv)
                        val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
                else
                        val->intval = POWER_SUPPLY_HEALTH_GOOD;
                break;
        case POWER_SUPPLY_PROP_ONLINE:
                val->intval = di->usb.charger_online;
                break;
        case POWER_SUPPLY_PROP_PRESENT:
                val->intval = di->usb.charger_connected;
                break;
        case POWER_SUPPLY_PROP_VOLTAGE_NOW:
                ret = ab8500_charger_get_vbus_voltage(di);
                if (ret >= 0)
                        di->usb.charger_voltage = ret;
                val->intval = di->usb.charger_voltage * 1000;
                break;
        case POWER_SUPPLY_PROP_VOLTAGE_AVG:
                /*
                 * This property is used to indicate when CV mode is entered
                 * for the USB charger
                 */
                di->usb.cv_active = ab8500_charger_usb_cv(di);
                val->intval = di->usb.cv_active;
                break;
        case POWER_SUPPLY_PROP_CURRENT_NOW:
                ret = ab8500_charger_get_usb_current(di);
                if (ret >= 0)
                        di->usb.charger_current = ret;
                val->intval = di->usb.charger_current * 1000;
                break;
        case POWER_SUPPLY_PROP_CURRENT_AVG:
                /*
                 * This property is used to indicate when VBUS has collapsed
                 * due to too high output current from the USB charger
                 */
                if (di->flags.vbus_collapse)
                        val->intval = 1;
                else
                        val->intval = 0;
                break;
        default:
                return -EINVAL;
        }
        return 0;
}

/**
 * ab8500_charger_init_hw_registers() - Set up charger related registers
 * @di:         pointer to the ab8500_charger structure
 *
 * Set up charger OVV, watchdog and maximum voltage registers as well as
 * charging of the backup battery
 */
static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
{
        int ret = 0;

        /* Setup maximum charger current and voltage for ABB cut2.0 */
        if (!is_ab8500_1p1_or_earlier(di->parent)) {
                ret = abx500_set_register_interruptible(di->dev,
                        AB8500_CHARGER,
                        AB8500_CH_VOLT_LVL_MAX_REG, CH_VOL_LVL_4P6);
                if (ret) {
                        dev_err(di->dev,
                                "failed to set CH_VOLT_LVL_MAX_REG\n");
                        goto out;
                }

                ret = abx500_set_register_interruptible(di->dev,
                        AB8500_CHARGER,
                        AB8500_CH_OPT_CRNTLVL_MAX_REG, CH_OP_CUR_LVL_1P6);
                if (ret) {
                        dev_err(di->dev,
                                "failed to set CH_OPT_CRNTLVL_MAX_REG\n");
                        goto out;
                }
        }

        if (is_ab9540_2p0(di->parent) || is_ab8505_2p0(di->parent))
                ret = abx500_mask_and_set_register_interruptible(di->dev,
                        AB8500_CHARGER,
                        AB8500_USBCH_CTRL2_REG,
                        VBUS_AUTO_IN_CURR_LIM_ENA,
                        VBUS_AUTO_IN_CURR_LIM_ENA);
        else
                /*
                 * VBUS OVV set to 6.3V and enable automatic current limitation
                 */
                ret = abx500_set_register_interruptible(di->dev,
                        AB8500_CHARGER,
                        AB8500_USBCH_CTRL2_REG,
                        VBUS_OVV_SELECT_6P3V | VBUS_AUTO_IN_CURR_LIM_ENA);
        if (ret) {
                dev_err(di->dev,
                        "failed to set automatic current limitation\n");
                goto out;
        }

        /* Enable main watchdog in OTP */
        ret = abx500_set_register_interruptible(di->dev,
                AB8500_OTP_EMUL, AB8500_OTP_CONF_15, OTP_ENABLE_WD);
        if (ret) {
                dev_err(di->dev, "failed to enable main WD in OTP\n");
                goto out;
        }

        /* Enable main watchdog */
        ret = abx500_set_register_interruptible(di->dev,
                AB8500_SYS_CTRL2_BLOCK,
                AB8500_MAIN_WDOG_CTRL_REG, MAIN_WDOG_ENA);
        if (ret) {
                dev_err(di->dev, "faile to enable main watchdog\n");
                goto out;
        }

        /*
         * Due to internal synchronisation, Enable and Kick watchdog bits
         * cannot be enabled in a single write.
         * A minimum delay of 2*32 kHz period (62.5µs) must be inserted
         * between writing Enable then Kick bits.
         */
        udelay(63);

        /* Kick main watchdog */
        ret = abx500_set_register_interruptible(di->dev,
                AB8500_SYS_CTRL2_BLOCK,
                AB8500_MAIN_WDOG_CTRL_REG,
                (MAIN_WDOG_ENA | MAIN_WDOG_KICK));
        if (ret) {
                dev_err(di->dev, "failed to kick main watchdog\n");
                goto out;
        }

        /* Disable main watchdog */
        ret = abx500_set_register_interruptible(di->dev,
                AB8500_SYS_CTRL2_BLOCK,
                AB8500_MAIN_WDOG_CTRL_REG, MAIN_WDOG_DIS);
        if (ret) {
                dev_err(di->dev, "failed to disable main watchdog\n");
                goto out;
        }

        /* Set watchdog timeout */
        ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
                AB8500_CH_WD_TIMER_REG, WD_TIMER);
        if (ret) {
                dev_err(di->dev, "failed to set charger watchdog timeout\n");
                goto out;
        }

        /* Set charger watchdog timeout */
        ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
                AB8500_CH_WD_TIMER_REG, WD_TIMER);
        if (ret) {
                dev_err(di->dev, "failed to set charger watchdog timeout\n");
                goto out;
        }

        ret = ab8500_charger_led_en(di, false);
        if (ret < 0) {
                dev_err(di->dev, "failed to disable LED\n");
                goto out;
        }

        /* Backup battery voltage and current */
        ret = abx500_set_register_interruptible(di->dev,
                AB8500_RTC,
                AB8500_RTC_BACKUP_CHG_REG,
                di->bm->bkup_bat_v |
                di->bm->bkup_bat_i);
        if (ret) {
                dev_err(di->dev, "failed to setup backup battery charging\n");
                goto out;
        }

        /* Enable backup battery charging */
        abx500_mask_and_set_register_interruptible(di->dev,
                AB8500_RTC, AB8500_RTC_CTRL_REG,
                RTC_BUP_CH_ENA, RTC_BUP_CH_ENA);
        if (ret < 0)
                dev_err(di->dev, "%s mask and set failed\n", __func__);

out:
        return ret;
}

/*
 * ab8500 charger driver interrupts and their respective isr
 */
static struct ab8500_charger_interrupts ab8500_charger_irq[] = {
        {"MAIN_CH_UNPLUG_DET", ab8500_charger_mainchunplugdet_handler},
        {"MAIN_CHARGE_PLUG_DET", ab8500_charger_mainchplugdet_handler},
        {"MAIN_EXT_CH_NOT_OK", ab8500_charger_mainextchnotok_handler},
        {"MAIN_CH_TH_PROT_R", ab8500_charger_mainchthprotr_handler},
        {"MAIN_CH_TH_PROT_F", ab8500_charger_mainchthprotf_handler},
        {"VBUS_DET_F", ab8500_charger_vbusdetf_handler},
        {"VBUS_DET_R", ab8500_charger_vbusdetr_handler},
        {"USB_LINK_STATUS", ab8500_charger_usblinkstatus_handler},
        {"USB_CH_TH_PROT_R", ab8500_charger_usbchthprotr_handler},
        {"USB_CH_TH_PROT_F", ab8500_charger_usbchthprotf_handler},
        {"USB_CHARGER_NOT_OKR", ab8500_charger_usbchargernotokr_handler},
        {"VBUS_OVV", ab8500_charger_vbusovv_handler},
        {"CH_WD_EXP", ab8500_charger_chwdexp_handler},
        {"VBUS_CH_DROP_END", ab8500_charger_vbuschdropend_handler},
};

static int ab8500_charger_usb_notifier_call(struct notifier_block *nb,
                unsigned long event, void *power)
{
        struct ab8500_charger *di =
                container_of(nb, struct ab8500_charger, nb);
        enum ab8500_usb_state bm_usb_state;
        unsigned mA = *((unsigned *)power);

        if (!di)
                return NOTIFY_DONE;

        if (event != USB_EVENT_VBUS) {