LXR linux/drivers/pcmcia/Kconfig

   1#
   2# PCCARD (PCMCIA/CardBus) bus subsystem configuration
   3#
   4
   5menuconfig PCCARD
   6        tristate "PCCard (PCMCIA/CardBus) support"
   7        depends on HOTPLUG
   8        ---help---
   9          Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
  10          computer.  These are credit-card size devices such as network cards,
  11          modems or hard drives often used with laptops computers.  There are
  12          actually two varieties of these cards: 16 bit PCMCIA and 32 bit
  13          CardBus cards.
  14
  15          To compile this driver as modules, choose M here: the
  16          module will be called pcmcia_core.
  17
  18if PCCARD
  19
  20config PCMCIA
  21        tristate "16-bit PCMCIA support"
  22        select CRC32
  23        default y
  24        ---help---
  25           This option enables support for 16-bit PCMCIA cards. Most older
  26           PC-cards are such 16-bit PCMCIA cards, so unless you know you're
  27           only using 32-bit CardBus cards, say Y or M here.
  28
  29           To use 16-bit PCMCIA cards, you will need supporting software in
  30           most cases. (see the file <file:Documentation/Changes> for
  31           location and details).
  32
  33           To compile this driver as modules, choose M here: the
  34           module will be called pcmcia.
  35
  36           If unsure, say Y.
  37
  38config PCMCIA_LOAD_CIS
  39        bool "Load CIS updates from userspace (EXPERIMENTAL)"
  40        depends on PCMCIA && EXPERIMENTAL
  41        select FW_LOADER
  42        default y
  43        help
  44          Some PCMCIA cards require an updated Card Information Structure (CIS)
  45          to be loaded from userspace to work correctly. If you say Y here,
  46          and your userspace is arranged correctly, this will be loaded
  47          automatically using the in-kernel firmware loader and the hotplug
  48          subsystem, instead of relying on cardmgr from pcmcia-cs to do so.
  49
  50          If unsure, say Y.
  51
  52config CARDBUS
  53        bool "32-bit CardBus support"
  54        depends on PCI
  55        default y
  56        ---help---
  57          CardBus is a bus mastering architecture for PC-cards, which allows
  58          for 32 bit PC-cards (the original PCMCIA standard specifies only
  59          a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.
  60
  61          To use 32 bit PC-cards, you also need a CardBus compatible host
  62          bridge. Virtually all modern PCMCIA bridges do this, and most of
  63          them are "yenta-compatible", so say Y or M there, too.
  64
  65          If unsure, say Y.
  66
  67comment "PC-card bridges"
  68
  69config YENTA
  70        tristate "CardBus yenta-compatible bridge support"
  71        depends on PCI
  72        select CARDBUS if !EXPERT
  73        select PCCARD_NONSTATIC if PCMCIA != n
  74        ---help---
  75          This option enables support for CardBus host bridges.  Virtually
  76          all modern PCMCIA bridges are CardBus compatible.  A "bridge" is
  77          the hardware inside your computer that PCMCIA cards are plugged
  78          into.
  79
  80          To compile this driver as modules, choose M here: the
  81          module will be called yenta_socket.
  82
  83          If unsure, say Y.
  84
  85config YENTA_O2
  86        default y
  87        bool "Special initialization for O2Micro bridges" if EXPERT
  88        depends on YENTA
  89
  90config YENTA_RICOH
  91        default y
  92        bool "Special initialization for Ricoh bridges" if EXPERT
  93        depends on YENTA
  94
  95config YENTA_TI
  96        default y
  97        bool "Special initialization for TI and EnE bridges" if EXPERT
  98        depends on YENTA
  99
 100config YENTA_ENE_TUNE
 101        default y
 102        bool "Auto-tune EnE bridges for CB cards" if EXPERT
 103        depends on YENTA_TI && CARDBUS
 104
 105config YENTA_TOSHIBA
 106        default y
 107        bool "Special initialization for Toshiba ToPIC bridges" if EXPERT
 108        depends on YENTA
 109
 110config PD6729
 111        tristate "Cirrus PD6729 compatible bridge support"
 112        depends on PCMCIA && PCI
 113        select PCCARD_NONSTATIC
 114        help
 115          This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
 116          device, found in some older laptops and PCMCIA card readers.
 117
 118config I82092
 119        tristate "i82092 compatible bridge support"
 120        depends on PCMCIA && PCI
 121        select PCCARD_NONSTATIC
 122        help
 123          This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
 124          found in some older laptops and more commonly in evaluation boards for the
 125          chip.
 126
 127config I82365
 128        tristate "i82365 compatible bridge support"
 129        depends on PCMCIA && ISA
 130        select PCCARD_NONSTATIC
 131        help
 132          Say Y here to include support for ISA-bus PCMCIA host bridges that
 133          are register compatible with the Intel i82365.  These are found on
 134          older laptops and ISA-bus card readers for desktop systems.  A
 135          "bridge" is the hardware inside your computer that PCMCIA cards are
 136          plugged into. If unsure, say N.
 137
 138config TCIC
 139        tristate "Databook TCIC host bridge support"
 140        depends on PCMCIA && ISA
 141        select PCCARD_NONSTATIC
 142        help
 143          Say Y here to include support for the Databook TCIC family of PCMCIA
 144          host bridges. These are only found on a handful of old systems.
 145          "Bridge" is the name used for the hardware inside your computer that
 146          PCMCIA cards are plugged into. If unsure, say N.
 147
 148config PCMCIA_M8XX
 149        tristate "MPC8xx PCMCIA support"
 150        depends on PCCARD && PPC && 8xx
 151        select PCCARD_IODYN if PCMCIA != n
 152        help
 153          Say Y here to include support for PowerPC 8xx series PCMCIA
 154          controller.
 155
 156          This driver is also available as a module called m8xx_pcmcia.
 157
 158config PCMCIA_AU1X00
 159        tristate "Au1x00 pcmcia support"
 160        depends on MIPS_ALCHEMY && PCMCIA
 161
 162config PCMCIA_ALCHEMY_DEVBOARD
 163        tristate "Alchemy Db/Pb1xxx PCMCIA socket services"
 164        depends on MIPS_ALCHEMY && PCMCIA
 165        select 64BIT_PHYS_ADDR
 166        help
 167          Enable this driver of you want PCMCIA support on your Alchemy
 168          Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200 board.
 169          NOT suitable for the PB1000!
 170
 171          This driver is also available as a module called db1xxx_ss.ko
 172
 173config PCMCIA_XXS1500
 174        tristate "MyCable XXS1500 PCMCIA socket support"
 175        depends on PCMCIA && MIPS_XXS1500
 176        select 64BIT_PHYS_ADDR
 177        help
 178          Support for the PCMCIA/CF socket interface on MyCable XXS1500
 179          systems.
 180
 181          This driver is also available as a module called xxs1500_ss.ko
 182
 183config PCMCIA_BCM63XX
 184        tristate "bcm63xx pcmcia support"
 185        depends on BCM63XX && PCMCIA
 186
 187config PCMCIA_SOC_COMMON
 188        tristate
 189
 190config PCMCIA_SA1100
 191        tristate "SA1100 support"
 192        depends on ARM && ARCH_SA1100 && PCMCIA
 193        select PCMCIA_SOC_COMMON
 194        help
 195          Say Y here to include support for SA11x0-based PCMCIA or CF
 196          sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
 197          Xscale(R) embedded machines.
 198
 199          This driver is also available as a module called sa1100_cs.
 200
 201config PCMCIA_SA1111
 202        tristate "SA1111 support"
 203        depends on ARM && ARCH_SA1100 && SA1111 && PCMCIA
 204        select PCMCIA_SOC_COMMON
 205        help
 206          Say Y  here to include support for SA1111-based PCMCIA or CF
 207          sockets, found on the Jornada 720, Graphicsmaster and other
 208          StrongARM(R)/Xscale(R) embedded machines.
 209
 210          This driver is also available as a module called sa1111_cs.
 211
 212config PCMCIA_PXA2XX
 213        tristate "PXA2xx support"
 214        depends on ARM && ARCH_PXA && PCMCIA
 215        depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
 216                    || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
 217                    || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \
 218                    || MACH_VPAC270 || MACH_BALLOON3 || MACH_COLIBRI \
 219                    || MACH_COLIBRI320)
 220        select PCMCIA_SOC_COMMON
 221        help
 222          Say Y here to include support for the PXA2xx PCMCIA controller
 223
 224config PCMCIA_DEBUG
 225        bool "Enable debugging"
 226        depends on (PCMCIA_SA1111 || PCMCIA_SA1100 || PCMCIA_PXA2XX)
 227        help
 228          Say Y here to enable debugging for the SoC PCMCIA layer.
 229          You will need to choose the debugging level either via the
 230          kernel command line, or module options depending whether
 231          you build the drivers as modules.
 232
 233          The kernel command line options are:
 234            sa11xx_core.pc_debug=N
 235            pxa2xx_core.pc_debug=N
 236
 237          The module option is called pc_debug=N
 238
 239          In all the above examples, N is the debugging verbosity
 240          level.
 241
 242config PCMCIA_PROBE
 243        bool
 244        default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X && !PARISC
 245
 246config M32R_PCC
 247        bool "M32R PCMCIA I/F"
 248        depends on M32R && CHIP_M32700 && PCMCIA
 249        help
 250          Say Y here to use the M32R PCMCIA controller.
 251
 252config M32R_CFC
 253        bool "M32R CF I/F Controller"
 254        depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT)
 255        help
 256          Say Y here to use the M32R CompactFlash controller.
 257
 258config M32R_CFC_NUM
 259        int "M32R CF I/F number"
 260        depends on M32R_CFC
 261        default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT
 262        help
 263          Set the number of M32R CF slots.
 264
 265config PCMCIA_VRC4171
 266        tristate "NEC VRC4171 Card Controllers support"
 267        depends on CPU_VR41XX && ISA && PCMCIA
 268
 269config PCMCIA_VRC4173
 270        tristate "NEC VRC4173 CARDU support"
 271        depends on CPU_VR41XX && PCI && PCMCIA
 272
 273config OMAP_CF
 274        tristate "OMAP CompactFlash Controller"
 275        depends on PCMCIA && ARCH_OMAP16XX
 276        help
 277          Say Y here to support the CompactFlash controller on OMAP.
 278          Note that this doesn't support "True IDE" mode.
 279
 280config BFIN_CFPCMCIA
 281        tristate "Blackfin CompactFlash PCMCIA Driver"
 282        depends on PCMCIA && BLACKFIN
 283        help
 284          Say Y here to support the CompactFlash PCMCIA driver for Blackfin.
 285
 286
 287config AT91_CF
 288        tristate "AT91 CompactFlash Controller"
 289        depends on PCMCIA && ARCH_AT91RM9200
 290        help
 291          Say Y here to support the CompactFlash controller on AT91 chips.
 292          Or choose M to compile the driver as a module named "at91_cf".
 293
 294config ELECTRA_CF
 295        tristate "Electra CompactFlash Controller"
 296        depends on PCMCIA && PPC_PASEMI
 297        help
 298          Say Y here to support the CompactFlash controller on the
 299          PA Semi Electra eval board.
 300
 301config PCCARD_NONSTATIC
 302        bool
 303
 304config PCCARD_IODYN
 305        bool
 306
 307endif   # PCCARD
 308