linux/drivers/pci/hotplug/Kconfig
<<
>>
Prefs
   1#
   2# PCI Hotplug support
   3#
   4
   5menuconfig HOTPLUG_PCI
   6        bool "Support for PCI Hotplug"
   7        depends on PCI && SYSFS
   8        ---help---
   9          Say Y here if you have a motherboard with a PCI Hotplug controller.
  10          This allows you to add and remove PCI cards while the machine is
  11          powered up and running.
  12
  13          When in doubt, say N.
  14
  15if HOTPLUG_PCI
  16
  17config HOTPLUG_PCI_COMPAQ
  18        tristate "Compaq PCI Hotplug driver"
  19        depends on X86 && PCI_BIOS
  20        help
  21          Say Y here if you have a motherboard with a Compaq PCI Hotplug
  22          controller.
  23
  24          To compile this driver as a module, choose M here: the
  25          module will be called cpqphp.
  26
  27          When in doubt, say N.
  28
  29config HOTPLUG_PCI_COMPAQ_NVRAM
  30        bool "Save configuration into NVRAM on Compaq servers"
  31        depends on HOTPLUG_PCI_COMPAQ
  32        help
  33          Say Y here if you have a Compaq server that has a PCI Hotplug
  34          controller.  This will allow the PCI Hotplug driver to store the PCI
  35          system configuration options in NVRAM.
  36
  37          When in doubt, say N.
  38
  39config HOTPLUG_PCI_IBM
  40        tristate "IBM PCI Hotplug driver"
  41        depends on X86_IO_APIC && X86 && PCI_BIOS
  42        help
  43          Say Y here if you have a motherboard with a IBM PCI Hotplug
  44          controller.
  45
  46          To compile this driver as a module, choose M here: the
  47          module will be called ibmphp.
  48
  49          When in doubt, say N.
  50
  51config HOTPLUG_PCI_ACPI
  52        bool "ACPI PCI Hotplug driver"
  53        depends on HOTPLUG_PCI=y && ((!ACPI_DOCK && ACPI) || (ACPI_DOCK))
  54        help
  55          Say Y here if you have a system that supports PCI Hotplug using
  56          ACPI.
  57
  58          When in doubt, say N.
  59
  60config HOTPLUG_PCI_ACPI_IBM
  61        tristate "ACPI PCI Hotplug driver IBM extensions"
  62        depends on HOTPLUG_PCI_ACPI
  63        help
  64          Say Y here if you have an IBM system that supports PCI Hotplug using
  65          ACPI.
  66
  67          To compile this driver as a module, choose M here: the
  68          module will be called acpiphp_ibm.
  69
  70          When in doubt, say N.
  71
  72config HOTPLUG_PCI_CPCI
  73        bool "CompactPCI Hotplug driver"
  74        help
  75          Say Y here if you have a CompactPCI system card with CompactPCI
  76          hotswap support per the PICMG 2.1 specification.
  77
  78          When in doubt, say N.
  79
  80config HOTPLUG_PCI_CPCI_ZT5550
  81        tristate "Ziatech ZT5550 CompactPCI Hotplug driver"
  82        depends on HOTPLUG_PCI_CPCI && X86
  83        help
  84          Say Y here if you have an Performance Technologies (formerly Intel,
  85          formerly just Ziatech) Ziatech ZT5550 CompactPCI system card.
  86
  87          To compile this driver as a module, choose M here: the
  88          module will be called cpcihp_zt5550.
  89
  90          When in doubt, say N.
  91
  92config HOTPLUG_PCI_CPCI_GENERIC
  93        tristate "Generic port I/O CompactPCI Hotplug driver"
  94        depends on HOTPLUG_PCI_CPCI && X86
  95        help
  96          Say Y here if you have a CompactPCI system card that exposes the #ENUM
  97          hotswap signal as a bit in a system register that can be read through
  98          standard port I/O.
  99
 100          To compile this driver as a module, choose M here: the
 101          module will be called cpcihp_generic.
 102
 103          When in doubt, say N.
 104
 105config HOTPLUG_PCI_SHPC
 106        tristate "SHPC PCI Hotplug driver"
 107        help
 108          Say Y here if you have a motherboard with a SHPC PCI Hotplug
 109          controller.
 110
 111          To compile this driver as a module, choose M here: the
 112          module will be called shpchp.
 113
 114          When in doubt, say N.
 115
 116config HOTPLUG_PCI_RPA
 117        tristate "RPA PCI Hotplug driver"
 118        depends on PPC_PSERIES && EEH
 119        help
 120          Say Y here if you have a RPA system that supports PCI Hotplug.
 121
 122          To compile this driver as a module, choose M here: the
 123          module will be called rpaphp.
 124
 125          When in doubt, say N.
 126
 127config HOTPLUG_PCI_RPA_DLPAR
 128        tristate "RPA Dynamic Logical Partitioning for I/O slots"
 129        depends on HOTPLUG_PCI_RPA
 130        help
 131          Say Y here if your system supports Dynamic Logical Partitioning
 132          for I/O slots.
 133
 134          To compile this driver as a module, choose M here: the
 135          module will be called rpadlpar_io.
 136
 137          When in doubt, say N.
 138
 139config HOTPLUG_PCI_SGI
 140        tristate "SGI PCI Hotplug Support"
 141        depends on IA64_SGI_SN2 || IA64_GENERIC
 142        help
 143          Say Y here if you want to use the SGI Altix Hotplug
 144          Driver for PCI devices.
 145
 146          When in doubt, say N.
 147
 148config HOTPLUG_PCI_S390
 149        bool "System z PCI Hotplug Support"
 150        depends on S390 && 64BIT
 151        help
 152          Say Y here if you want to use the System z PCI Hotplug
 153          driver for PCI devices. Without this driver it is not
 154          possible to access stand-by PCI functions nor to deconfigure
 155          PCI functions.
 156
 157          When in doubt, say Y.
 158
 159endif # HOTPLUG_PCI
 160
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.