LXR linux/drivers/net/wireless/ath/ath9k/Kconfig

   1config ATH9K_HW
   2        tristate
   3config ATH9K_COMMON
   4        tristate
   5        select ATH_COMMON
   6config ATH9K_DFS_DEBUGFS
   7        def_bool y
   8        depends on ATH9K_DEBUGFS && ATH9K_DFS_CERTIFIED
   9
  10config ATH9K_BTCOEX_SUPPORT
  11        bool "Atheros bluetooth coexistence support"
  12        depends on (ATH9K || ATH9K_HTC)
  13        default y
  14        ---help---
  15          Say Y, if you want to use the ath9k/ath9k_htc radios together with
  16          Bluetooth modules in the same system.
  17
  18config ATH9K
  19        tristate "Atheros 802.11n wireless cards support"
  20        depends on MAC80211
  21        select ATH9K_HW
  22        select MAC80211_LEDS
  23        select LEDS_CLASS
  24        select NEW_LEDS
  25        select ATH9K_COMMON
  26        ---help---
  27          This module adds support for wireless adapters based on
  28          Atheros IEEE 802.11n AR5008, AR9001 and AR9002 family
  29          of chipsets. For a specific list of supported external
  30          cards, laptops that already ship with these cards and
  31          APs that come with these cards refer to to ath9k wiki
  32          products page:
  33
  34          http://wireless.kernel.org/en/users/Drivers/ath9k/products
  35
  36          If you choose to build a module, it'll be called ath9k.
  37
  38config ATH9K_PCI
  39        bool "Atheros ath9k PCI/PCIe bus support"
  40        default y
  41        depends on ATH9K && PCI
  42        ---help---
  43          This option enables the PCI bus support in ath9k.
  44
  45          Say Y, if you have a compatible PCI/PCIe wireless card.
  46
  47config ATH9K_AHB
  48        bool "Atheros ath9k AHB bus support"
  49        depends on ATH9K
  50        default n
  51        ---help---
  52          This option enables the AHB bus support in ath9k.
  53
  54          Say Y, if you have a SoC with a compatible built-in
  55          wireless MAC. Say N if unsure.
  56
  57config ATH9K_DEBUGFS
  58        bool "Atheros ath9k debugging"
  59        depends on ATH9K
  60        select MAC80211_DEBUGFS
  61        select RELAY
  62        ---help---
  63          Say Y, if you need access to ath9k's statistics for
  64          interrupts, rate control, etc.
  65
  66          Also required for changing debug message flags at run time.
  67
  68config ATH9K_DFS_CERTIFIED
  69        bool "Atheros DFS support for certified platforms"
  70        depends on ATH9K && CFG80211_CERTIFICATION_ONUS
  71        default n
  72        ---help---
  73          This option enables DFS support for initiating radiation on
  74          ath9k. There is no way to dynamically detect if a card was DFS
  75          certified and as such this is left as a build time option. This
  76          option should only be enabled by system integrators that can
  77          guarantee that all the platforms that their kernel will run on
  78          have obtained appropriate regulatory body certification for a
  79          respective Atheros card by using ath9k on the target shipping
  80          platforms.
  81
  82          This is currently only a placeholder for future DFS support,
  83          as DFS support requires more components that still need to be
  84          developed. At this point enabling this option won't do anything
  85          except increase code size.
  86
  87config ATH9K_MAC_DEBUG
  88        bool "Atheros MAC statistics"
  89        depends on ATH9K_DEBUGFS
  90        default y
  91        ---help---
  92          This option enables collection of statistics for Rx/Tx status
  93          data and some other MAC related statistics
  94
  95config ATH9K_RATE_CONTROL
  96        bool "Atheros ath9k rate control"
  97        depends on ATH9K
  98        default y
  99        ---help---
 100          Say Y, if you want to use the ath9k specific rate control
 101          module instead of minstrel_ht.
 102
 103config ATH9K_HTC
 104       tristate "Atheros HTC based wireless cards support"
 105       depends on USB && MAC80211
 106       select ATH9K_HW
 107       select MAC80211_LEDS
 108       select LEDS_CLASS
 109       select NEW_LEDS
 110       select ATH9K_COMMON
 111       ---help---
 112         Support for Atheros HTC based cards.
 113         Chipsets supported: AR9271
 114
 115         For more information: http://wireless.kernel.org/en/users/Drivers/ath9k_htc
 116
 117         The built module will be ath9k_htc.
 118
 119config ATH9K_HTC_DEBUGFS
 120        bool "Atheros ath9k_htc debugging"
 121        depends on ATH9K_HTC && DEBUG_FS
 122        ---help---
 123          Say Y, if you need access to ath9k_htc's statistics.
 124