LXR linux/drivers/net/ethernet/ti/Kconfig

   1#
   2# TI device configuration
   3#
   4
   5config NET_VENDOR_TI
   6        bool "Texas Instruments (TI) devices"
   7        default y
   8        depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX))
   9        ---help---
  10          If you have a network (Ethernet) card belonging to this class, say Y
  11          and read the Ethernet-HOWTO, available from
  12          <http://www.tldp.org/docs.html#howto>.
  13
  14          Note that the answer to this question doesn't directly affect the
  15          kernel: saying N will just cause the configurator to skip all
  16          the questions about TI devices. If you say Y, you will be asked for
  17          your specific card in the following questions.
  18
  19if NET_VENDOR_TI
  20
  21config TI_DAVINCI_EMAC
  22        tristate "TI DaVinci EMAC Support"
  23        depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
  24        select TI_DAVINCI_MDIO
  25        select TI_DAVINCI_CPDMA
  26        select PHYLIB
  27        ---help---
  28          This driver supports TI's DaVinci Ethernet .
  29
  30          To compile this driver as a module, choose M here: the module
  31          will be called davinci_emac_driver.  This is recommended.
  32
  33config TI_DAVINCI_MDIO
  34        tristate "TI DaVinci MDIO Support"
  35        depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX )
  36        select PHYLIB
  37        ---help---
  38          This driver supports TI's DaVinci MDIO module.
  39
  40          To compile this driver as a module, choose M here: the module
  41          will be called davinci_mdio.  This is recommended.
  42
  43config TI_DAVINCI_CPDMA
  44        tristate "TI DaVinci CPDMA Support"
  45        depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 || SOC_AM33XX )
  46        ---help---
  47          This driver supports TI's DaVinci CPDMA dma engine.
  48
  49          To compile this driver as a module, choose M here: the module
  50          will be called davinci_cpdma.  This is recommended.
  51
  52config TI_CPSW
  53        tristate "TI CPSW Switch Support"
  54        depends on ARM && (ARCH_DAVINCI || SOC_AM33XX)
  55        select TI_DAVINCI_CPDMA
  56        select TI_DAVINCI_MDIO
  57        ---help---
  58          This driver supports TI's CPSW Ethernet Switch.
  59
  60          To compile this driver as a module, choose M here: the module
  61          will be called cpsw.
  62
  63config TI_CPTS
  64        boolean "TI Common Platform Time Sync (CPTS) Support"
  65        depends on TI_CPSW
  66        select PTP_1588_CLOCK
  67        ---help---
  68          This driver supports the Common Platform Time Sync unit of
  69          the CPSW Ethernet Switch. The unit can time stamp PTP UDP/IPv4
  70          and Layer 2 packets, and the driver offers a PTP Hardware Clock.
  71
  72config TLAN
  73        tristate "TI ThunderLAN support"
  74        depends on (PCI || EISA)
  75        ---help---
  76          If you have a PCI Ethernet network card based on the ThunderLAN chip
  77          which is supported by this driver, say Y and read the
  78          Ethernet-HOWTO, available from
  79          <http://www.tldp.org/docs.html#howto>.
  80
  81          Devices currently supported by this driver are Compaq Netelligent,
  82          Compaq NetFlex and Olicom cards.  Please read the file
  83          <file:Documentation/networking/tlan.txt> for more details.
  84
  85          To compile this driver as a module, choose M here. The module
  86          will be called tlan.
  87
  88          Please email feedback to <torben.mathiasen@compaq.com>.
  89
  90config CPMAC
  91        tristate "TI AR7 CPMAC Ethernet support"
  92        depends on AR7
  93        select PHYLIB
  94        ---help---
  95          TI AR7 CPMAC Ethernet support
  96
  97endif # NET_VENDOR_TI
  98