1# 2# Multimedia Video device configuration 3# 4 5menuconfig RADIO_ADAPTERS 6 bool "Radio Adapters" 7 depends on VIDEO_V4L2 8 default y 9 ---help--- 10 Say Y here to enable selecting AM/FM radio adapters. 11 12if RADIO_ADAPTERS && VIDEO_V4L2 13 14config RADIO_CADET 15 tristate "ADS Cadet AM/FM Tuner" 16 depends on ISA && VIDEO_V4L2 17 ---help--- 18 Choose Y here if you have one of these AM/FM radio cards, and then 19 fill in the port address below. 20 21 In order to control your radio card, you will need to use programs 22 that are compatible with the Video For Linux API. Information on 23 this API and pointers to "v4l" programs may be found at 24 <file:Documentation/video4linux/API.html>. 25 26 Further documentation on this driver can be found on the WWW at 27 <http://linux.blackhawke.net/cadet/>. 28 29 To compile this driver as a module, choose M here: the 30 module will be called radio-cadet. 31 32config RADIO_RTRACK 33 tristate "AIMSlab RadioTrack (aka RadioReveal) support" 34 depends on ISA && VIDEO_V4L2 35 ---help--- 36 Choose Y here if you have one of these FM radio cards, and then fill 37 in the port address below. 38 39 Note that newer AIMSlab RadioTrack cards have a different chipset 40 and are not supported by this driver. For these cards, use the 41 RadioTrack II driver below. 42 43 If you have a GemTeks combined (PnP) sound- and radio card you must 44 use this driver as a module and setup the card with isapnptools. 45 You must also pass the module a suitable io parameter, 0x248 has 46 been reported to be used by these cards. 47 48 In order to control your radio card, you will need to use programs 49 that are compatible with the Video For Linux API. Information on 50 this API and pointers to "v4l" programs may be found at 51 <file:Documentation/video4linux/API.html>. More information is 52 contained in the file 53 <file:Documentation/video4linux/radiotrack.txt>. 54 55 To compile this driver as a module, choose M here: the 56 module will be called radio-aimslab. 57 58config RADIO_RTRACK_PORT 59 hex "RadioTrack i/o port (0x20f or 0x30f)" 60 depends on RADIO_RTRACK=y 61 default "20f" 62 help 63 Enter either 0x30f or 0x20f here. The card default is 0x30f, if you 64 haven't changed the jumper setting on the card. 65 66config RADIO_RTRACK2 67 tristate "AIMSlab RadioTrack II support" 68 depends on ISA && VIDEO_V4L2 69 ---help--- 70 Choose Y here if you have this FM radio card, and then fill in the 71 port address below. 72 73 In order to control your radio card, you will need to use programs 74 that are compatible with the Video For Linux API. Information on 75 this API and pointers to "v4l" programs may be found at 76 <file:Documentation/video4linux/API.html>. 77 78 To compile this driver as a module, choose M here: the 79 module will be called radio-rtrack2. 80 81config RADIO_RTRACK2_PORT 82 hex "RadioTrack II i/o port (0x20c or 0x30c)" 83 depends on RADIO_RTRACK2=y 84 default "30c" 85 help 86 Enter either 0x30c or 0x20c here. The card default is 0x30c, if you 87 haven't changed the jumper setting on the card. 88 89config RADIO_AZTECH 90 tristate "Aztech/Packard Bell Radio" 91 depends on ISA && VIDEO_V4L2 92 ---help--- 93 Choose Y here if you have one of these FM radio cards, and then fill 94 in the port address below. 95 96 In order to control your radio card, you will need to use programs 97 that are compatible with the Video For Linux API. Information on 98 this API and pointers to "v4l" programs may be found at 99 <file:Documentation/video4linux/API.html>. 100 101 To compile this driver as a module, choose M here: the 102 module will be called radio-aztech. 103 104config RADIO_AZTECH_PORT 105 hex "Aztech/Packard Bell I/O port (0x350 or 0x358)" 106 depends on RADIO_AZTECH=y 107 default "350" 108 help 109 Enter either 0x350 or 0x358 here. The card default is 0x350, if you 110 haven't changed the setting of jumper JP3 on the card. Removing the 111 jumper sets the card to 0x358. 112 113config RADIO_GEMTEK 114 tristate "GemTek Radio card (or compatible) support" 115 depends on ISA && VIDEO_V4L2 116 ---help--- 117 Choose Y here if you have this FM radio card, and then fill in the 118 I/O port address and settings below. The following cards either have 119 GemTek Radio tuner or are rebranded GemTek Radio cards: 120 121 - Sound Vision 16 Gold with FM Radio 122 - Typhoon Radio card (some models) 123 - Hama Radio card 124 125 In order to control your radio card, you will need to use programs 126 that are compatible with the Video For Linux API. Information on 127 this API and pointers to "v4l" programs may be found at 128 <file:Documentation/video4linux/API.html>. 129 130 To compile this driver as a module, choose M here: the 131 module will be called radio-gemtek. 132 133config RADIO_GEMTEK_PORT 134 hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0c24c or 0x28c)" 135 depends on RADIO_GEMTEK=y 136 default "34c" 137 help 138 Enter either 0x20c, 0x30c, 0x24c or 0x34c here. The card default is 139 0x34c, if you haven't changed the jumper setting on the card. On 140 Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O 141 port is 0x20c, 0x248 or 0x28c. 142 If automatic I/O port probing is enabled this port will be used only 143 in case of automatic probing failure, ie. as a fallback. 144 145config RADIO_GEMTEK_PROBE 146 bool "Automatic I/O port probing" 147 depends on RADIO_GEMTEK=y 148 default y 149 help 150 Say Y here to enable automatic probing for GemTek Radio card. The 151 following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and 152 0x28c. 153 154config RADIO_MAXIRADIO 155 tristate "Guillemot MAXI Radio FM 2000 radio" 156 depends on VIDEO_V4L2 && PCI 157 ---help--- 158 Choose Y here if you have this radio card. This card may also be 159 found as Gemtek PCI FM. 160 161 In order to control your radio card, you will need to use programs 162 that are compatible with the Video For Linux API. Information on 163 this API and pointers to "v4l" programs may be found at 164 <file:Documentation/video4linux/API.html>. 165 166 To compile this driver as a module, choose M here: the 167 module will be called radio-maxiradio. 168 169config RADIO_MIROPCM20 170 tristate "miroSOUND PCM20 radio" 171 depends on ISA && ISA_DMA_API && VIDEO_V4L2 && SND 172 select SND_ISA 173 select SND_MIRO 174 ---help--- 175 Choose Y here if you have this FM radio card. You also need to enable 176 the ALSA sound system. This choice automatically selects the ALSA 177 sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this 178 is required for the radio-miropcm20. 179 180 In order to control your radio card, you will need to use programs 181 that are compatible with the Video For Linux API. Information on 182 this API and pointers to "v4l" programs may be found at 183 <file:Documentation/video4linux/API.html>. 184 185 To compile this driver as a module, choose M here: the 186 module will be called radio-miropcm20. 187 188config RADIO_SF16FMI 189 tristate "SF16-FMI/SF16-FMP Radio" 190 depends on ISA && VIDEO_V4L2 191 ---help--- 192 Choose Y here if you have one of these FM radio cards. 193 194 In order to control your radio card, you will need to use programs 195 that are compatible with the Video For Linux API. Information on 196 this API and pointers to "v4l" programs may be found at 197 <file:Documentation/video4linux/API.html>. 198 199 To compile this driver as a module, choose M here: the 200 module will be called radio-sf16fmi. 201 202config RADIO_SF16FMR2 203 tristate "SF16FMR2 Radio" 204 depends on ISA && VIDEO_V4L2 && SND 205 ---help--- 206 Choose Y here if you have one of these FM radio cards. 207 208 In order to control your radio card, you will need to use programs 209 that are compatible with the Video For Linux API. Information on 210 this API and pointers to "v4l" programs may be found on the WWW at 211 <http://roadrunner.swansea.uk.linux.org/v4l.shtml>. 212 213 To compile this driver as a module, choose M here: the 214 module will be called radio-sf16fmr2. 215 216config RADIO_TERRATEC 217 tristate "TerraTec ActiveRadio ISA Standalone" 218 depends on ISA && VIDEO_V4L2 219 ---help--- 220 Choose Y here if you have this FM radio card, and then fill in the 221 port address below. (TODO) 222 223 Note: This driver is in its early stages. Right now volume and 224 frequency control and muting works at least for me, but 225 unfortunately I have not found anybody who wants to use this card 226 with Linux. So if it is this what YOU are trying to do right now, 227 PLEASE DROP ME A NOTE!! Rolf Offermanns <rolf@offermanns.de>. 228 229 In order to control your radio card, you will need to use programs 230 that are compatible with the Video For Linux API. Information on 231 this API and pointers to "v4l" programs may be found at 232 <file:Documentation/video4linux/API.html>. 233 234 To compile this driver as a module, choose M here: the 235 module will be called radio-terratec. 236 237config RADIO_TERRATEC_PORT 238 hex "Terratec i/o port (normally 0x590)" 239 depends on RADIO_TERRATEC=y 240 default "590" 241 help 242 Fill in the I/O port of your TerraTec FM radio card. If unsure, go 243 with the default. 244 245config RADIO_TRUST 246 tristate "Trust FM radio card" 247 depends on ISA && VIDEO_V4L2 248 help 249 This is a driver for the Trust FM radio cards. Say Y if you have 250 such a card and want to use it under Linux. 251 252 To compile this driver as a module, choose M here: the 253 module will be called radio-trust. 254 255config RADIO_TRUST_PORT 256 hex "Trust i/o port (usually 0x350 or 0x358)" 257 depends on RADIO_TRUST=y 258 default "350" 259 help 260 Enter the I/O port of your Trust FM radio card. If unsure, try the 261 values "0x350" or "0x358". 262 263config RADIO_TYPHOON 264 tristate "Typhoon Radio (a.k.a. EcoRadio)" 265 depends on ISA && VIDEO_V4L2 266 ---help--- 267 Choose Y here if you have one of these FM radio cards, and then fill 268 in the port address and the frequency used for muting below. 269 270 In order to control your radio card, you will need to use programs 271 that are compatible with the Video For Linux API. Information on 272 this API and pointers to "v4l" programs may be found at 273 <file:Documentation/video4linux/API.html>. 274 275 To compile this driver as a module, choose M here: the 276 module will be called radio-typhoon. 277 278config RADIO_TYPHOON_PORT 279 hex "Typhoon I/O port (0x316 or 0x336)" 280 depends on RADIO_TYPHOON=y 281 default "316" 282 help 283 Enter the I/O port of your Typhoon or EcoRadio radio card. 284 285config RADIO_TYPHOON_MUTEFREQ 286 int "Typhoon frequency set when muting the device (kHz)" 287 depends on RADIO_TYPHOON=y 288 default "87500" 289 help 290 Enter the frequency used for muting the radio. The device is never 291 completely silent. If the volume is just turned down, you can still 292 hear silent voices and music. For that reason, the frequency of the 293 radio device is set to the frequency you can enter here whenever 294 the device is muted. There should be no local radio station at that 295 frequency. 296 297config RADIO_ZOLTRIX 298 tristate "Zoltrix Radio" 299 depends on ISA && VIDEO_V4L2 300 ---help--- 301 Choose Y here if you have one of these FM radio cards, and then fill 302 in the port address below. 303 304 In order to control your radio card, you will need to use programs 305 that are compatible with the Video For Linux API. Information on 306 this API and pointers to "v4l" programs may be found at 307 <file:Documentation/video4linux/API.html>. 308 309 To compile this driver as a module, choose M here: the 310 module will be called radio-zoltrix. 311 312config RADIO_ZOLTRIX_PORT 313 hex "ZOLTRIX I/O port (0x20c or 0x30c)" 314 depends on RADIO_ZOLTRIX=y 315 default "20c" 316 help 317 Enter the I/O port of your Zoltrix radio card. 318 319config I2C_SI4713 320 tristate "I2C driver for Silicon Labs Si4713 device" 321 depends on I2C && VIDEO_V4L2 322 ---help--- 323 Say Y here if you want support to Si4713 I2C device. 324 This device driver supports only i2c bus. 325 326 To compile this driver as a module, choose M here: the 327 module will be called si4713. 328 329config RADIO_SI4713 330 tristate "Silicon Labs Si4713 FM Radio Transmitter support" 331 depends on I2C && VIDEO_V4L2 332 select I2C_SI4713 333 ---help--- 334 Say Y here if you want support to Si4713 FM Radio Transmitter. 335 This device can transmit audio through FM. It can transmit 336 RDS and RBDS signals as well. This module is the v4l2 radio 337 interface for the i2c driver of this device. 338 339 To compile this driver as a module, choose M here: the 340 module will be called radio-si4713. 341 342config USB_DSBR 343 tristate "D-Link/GemTek USB FM radio support" 344 depends on USB && VIDEO_V4L2 345 ---help--- 346 Say Y here if you want to connect this type of radio to your 347 computer's USB port. Note that the audio is not digital, and 348 you must connect the line out connector to a sound card or a 349 set of speakers. 350 351 To compile this driver as a module, choose M here: the 352 module will be called dsbr100. 353 354config RADIO_SI470X 355 bool "Silicon Labs Si470x FM Radio Receiver support" 356 depends on VIDEO_V4L2 357 358source "drivers/media/radio/si470x/Kconfig" 359 360config USB_MR800 361 tristate "AverMedia MR 800 USB FM radio support" 362 depends on USB && VIDEO_V4L2 363 ---help--- 364 Say Y here if you want to connect this type of radio to your 365 computer's USB port. Note that the audio is not digital, and 366 you must connect the line out connector to a sound card or a 367 set of speakers. 368 369 To compile this driver as a module, choose M here: the 370 module will be called radio-mr800. 371 372config RADIO_TEA5764 373 tristate "TEA5764 I2C FM radio support" 374 depends on I2C && VIDEO_V4L2 375 ---help--- 376 Say Y here if you want to use the TEA5764 FM chip found in 377 EZX phones. This FM chip is present in EZX phones from Motorola, 378 connected to internal pxa I2C bus. 379 380 To compile this driver as a module, choose M here: the 381 module will be called radio-tea5764. 382 383config RADIO_TEA5764_XTAL 384 bool "TEA5764 crystal reference" 385 depends on RADIO_TEA5764=y 386 default y 387 help 388 Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N 389 here if TEA5764 reference frequency is connected in FREQIN. 390 391config RADIO_SAA7706H 392 tristate "SAA7706H Car Radio DSP" 393 depends on I2C && VIDEO_V4L2 394 ---help--- 395 Say Y here if you want to use the SAA7706H Car radio Digital 396 Signal Processor, found for instance on the Russellville development 397 board. On the russellville the device is connected to internal 398 timberdale I2C bus. 399 400 To compile this driver as a module, choose M here: the 401 module will be called SAA7706H. 402 403config RADIO_TEF6862 404 tristate "TEF6862 Car Radio Enhanced Selectivity Tuner" 405 depends on I2C && VIDEO_V4L2 406 ---help--- 407 Say Y here if you want to use the TEF6862 Car Radio Enhanced 408 Selectivity Tuner, found for instance on the Russellville development 409 board. On the russellville the device is connected to internal 410 timberdale I2C bus. 411 412 To compile this driver as a module, choose M here: the 413 module will be called TEF6862. 414 415config RADIO_TIMBERDALE 416 tristate "Enable the Timberdale radio driver" 417 depends on MFD_TIMBERDALE && VIDEO_V4L2 418 depends on I2C # for RADIO_SAA7706H 419 select RADIO_TEF6862 420 select RADIO_SAA7706H 421 ---help--- 422 This is a kind of umbrella driver for the Radio Tuner and DSP 423 found behind the Timberdale FPGA on the Russellville board. 424 Enabling this driver will automatically select the DSP and tuner. 425 426config RADIO_WL1273 427 tristate "Texas Instruments WL1273 I2C FM Radio" 428 depends on I2C && VIDEO_V4L2 429 select MFD_WL1273_CORE 430 select FW_LOADER 431 ---help--- 432 Choose Y here if you have this FM radio chip. 433 434 In order to control your radio card, you will need to use programs 435 that are compatible with the Video For Linux 2 API. Information on 436 this API and pointers to "v4l2" programs may be found at 437 <file:Documentation/video4linux/API.html>. 438 439 To compile this driver as a module, choose M here: the 440 module will be called radio-wl1273. 441 442# TI's ST based wl128x FM radio 443source "drivers/media/radio/wl128x/Kconfig" 444 445endif # RADIO_ADAPTERS 446