linux/drivers/block/cciss.c
<<
>>
Prefs
   1/*
   2 *    Disk Array driver for HP Smart Array controllers.
   3 *    (C) Copyright 2000, 2007 Hewlett-Packard Development Company, L.P.
   4 *
   5 *    This program is free software; you can redistribute it and/or modify
   6 *    it under the terms of the GNU General Public License as published by
   7 *    the Free Software Foundation; version 2 of the License.
   8 *
   9 *    This program is distributed in the hope that it will be useful,
  10 *    but WITHOUT ANY WARRANTY; without even the implied warranty of
  11 *    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  12 *    General Public License for more details.
  13 *
  14 *    You should have received a copy of the GNU General Public License
  15 *    along with this program; if not, write to the Free Software
  16 *    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
  17 *    02111-1307, USA.
  18 *
  19 *    Questions/Comments/Bugfixes to iss_storagedev@hp.com
  20 *
  21 */
  22
  23#include <linux/module.h>
  24#include <linux/interrupt.h>
  25#include <linux/types.h>
  26#include <linux/pci.h>
  27#include <linux/pci-aspm.h>
  28#include <linux/kernel.h>
  29#include <linux/slab.h>
  30#include <linux/delay.h>
  31#include <linux/major.h>
  32#include <linux/fs.h>
  33#include <linux/bio.h>
  34#include <linux/blkpg.h>
  35#include <linux/timer.h>
  36#include <linux/proc_fs.h>
  37#include <linux/seq_file.h>
  38#include <linux/init.h>
  39#include <linux/jiffies.h>
  40#include <linux/hdreg.h>
  41#include <linux/spinlock.h>
  42#include <linux/compat.h>
  43#include <linux/mutex.h>
  44#include <asm/uaccess.h>
  45#include <asm/io.h>
  46
  47#include <linux/dma-mapping.h>
  48#include <linux/blkdev.h>
  49#include <linux/genhd.h>
  50#include <linux/completion.h>
  51#include <scsi/scsi.h>
  52#include <scsi/sg.h>
  53#include <scsi/scsi_ioctl.h>
  54#include <linux/cdrom.h>
  55#include <linux/scatterlist.h>
  56#include <linux/kthread.h>
  57
  58#define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
  59#define DRIVER_NAME "HP CISS Driver (v 3.6.26)"
  60#define DRIVER_VERSION CCISS_DRIVER_VERSION(3, 6, 26)
  61
  62/* Embedded module documentation macros - see modules.h */
  63MODULE_AUTHOR("Hewlett-Packard Company");
  64MODULE_DESCRIPTION("Driver for HP Smart Array Controllers");
  65MODULE_SUPPORTED_DEVICE("HP Smart Array Controllers");
  66MODULE_VERSION("3.6.26");
  67MODULE_LICENSE("GPL");
  68static int cciss_tape_cmds = 6;
  69module_param(cciss_tape_cmds, int, 0644);
  70MODULE_PARM_DESC(cciss_tape_cmds,
  71        "number of commands to allocate for tape devices (default: 6)");
  72static int cciss_simple_mode;
  73module_param(cciss_simple_mode, int, S_IRUGO|S_IWUSR);
  74MODULE_PARM_DESC(cciss_simple_mode,
  75        "Use 'simple mode' rather than 'performant mode'");
  76
  77static DEFINE_MUTEX(cciss_mutex);
  78static struct proc_dir_entry *proc_cciss;
  79
  80#include "cciss_cmd.h"
  81#include "cciss.h"
  82#include <linux/cciss_ioctl.h>
  83
  84/* define the PCI info for the cards we can control */
  85static const struct pci_device_id cciss_pci_device_id[] = {
  86        {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISS,  0x0E11, 0x4070},
  87        {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB, 0x0E11, 0x4080},
  88        {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB, 0x0E11, 0x4082},
  89        {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB, 0x0E11, 0x4083},
  90        {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x4091},
  91        {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x409A},
  92        {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x409B},
  93        {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x409C},
  94        {PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, 0x0E11, 0x409D},
  95        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSA,     0x103C, 0x3225},
  96        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSC,     0x103C, 0x3223},
  97        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSC,     0x103C, 0x3234},
  98        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSC,     0x103C, 0x3235},
  99        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3211},
 100        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3212},
 101        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3213},
 102        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3214},
 103        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSD,     0x103C, 0x3215},
 104        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSC,     0x103C, 0x3237},
 105        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSC,     0x103C, 0x323D},
 106        {0,}
 107};
 108
 109MODULE_DEVICE_TABLE(pci, cciss_pci_device_id);
 110
 111/*  board_id = Subsystem Device ID & Vendor ID
 112 *  product = Marketing Name for the board
 113 *  access = Address of the struct of function pointers
 114 */
 115static struct board_type products[] = {
 116        {0x40700E11, "Smart Array 5300", &SA5_access},
 117        {0x40800E11, "Smart Array 5i", &SA5B_access},
 118        {0x40820E11, "Smart Array 532", &SA5B_access},
 119        {0x40830E11, "Smart Array 5312", &SA5B_access},
 120        {0x409A0E11, "Smart Array 641", &SA5_access},
 121        {0x409B0E11, "Smart Array 642", &SA5_access},
 122        {0x409C0E11, "Smart Array 6400", &SA5_access},
 123        {0x409D0E11, "Smart Array 6400 EM", &SA5_access},
 124        {0x40910E11, "Smart Array 6i", &SA5_access},
 125        {0x3225103C, "Smart Array P600", &SA5_access},
 126        {0x3223103C, "Smart Array P800", &SA5_access},
 127        {0x3234103C, "Smart Array P400", &SA5_access},
 128        {0x3235103C, "Smart Array P400i", &SA5_access},
 129        {0x3211103C, "Smart Array E200i", &SA5_access},
 130        {0x3212103C, "Smart Array E200", &SA5_access},
 131        {0x3213103C, "Smart Array E200i", &SA5_access},
 132        {0x3214103C, "Smart Array E200i", &SA5_access},
 133        {0x3215103C, "Smart Array E200i", &SA5_access},
 134        {0x3237103C, "Smart Array E500", &SA5_access},
 135        {0x3223103C, "Smart Array P800", &SA5_access},
 136        {0x3234103C, "Smart Array P400", &SA5_access},
 137        {0x323D103C, "Smart Array P700m", &SA5_access},
 138};
 139
 140/* How long to wait (in milliseconds) for board to go into simple mode */
 141#define MAX_CONFIG_WAIT 30000
 142#define MAX_IOCTL_CONFIG_WAIT 1000
 143
 144/*define how many times we will try a command because of bus resets */
 145#define MAX_CMD_RETRIES 3
 146
 147#define MAX_CTLR        32
 148
 149/* Originally cciss driver only supports 8 major numbers */
 150#define MAX_CTLR_ORIG   8
 151
 152static ctlr_info_t *hba[MAX_CTLR];
 153
 154static struct task_struct *cciss_scan_thread;
 155static DEFINE_MUTEX(scan_mutex);
 156static LIST_HEAD(scan_q);
 157
 158static void do_cciss_request(struct request_queue *q);
 159static irqreturn_t do_cciss_intx(int irq, void *dev_id);
 160static irqreturn_t do_cciss_msix_intr(int irq, void *dev_id);
 161static int cciss_open(struct block_device *bdev, fmode_t mode);
 162static int cciss_unlocked_open(struct block_device *bdev, fmode_t mode);
 163static int cciss_release(struct gendisk *disk, fmode_t mode);
 164static int do_ioctl(struct block_device *bdev, fmode_t mode,
 165                    unsigned int cmd, unsigned long arg);
 166static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
 167                       unsigned int cmd, unsigned long arg);
 168static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo);
 169
 170static int cciss_revalidate(struct gendisk *disk);
 171static int rebuild_lun_table(ctlr_info_t *h, int first_time, int via_ioctl);
 172static int deregister_disk(ctlr_info_t *h, int drv_index,
 173                           int clear_all, int via_ioctl);
 174
 175static void cciss_read_capacity(ctlr_info_t *h, int logvol,
 176                        sector_t *total_size, unsigned int *block_size);
 177static void cciss_read_capacity_16(ctlr_info_t *h, int logvol,
 178                        sector_t *total_size, unsigned int *block_size);
 179static void cciss_geometry_inquiry(ctlr_info_t *h, int logvol,
 180                        sector_t total_size,
 181                        unsigned int block_size, InquiryData_struct *inq_buff,
 182                                   drive_info_struct *drv);
 183static void __devinit cciss_interrupt_mode(ctlr_info_t *);
 184static int __devinit cciss_enter_simple_mode(struct ctlr_info *h);
 185static void start_io(ctlr_info_t *h);
 186static int sendcmd_withirq(ctlr_info_t *h, __u8 cmd, void *buff, size_t size,
 187                        __u8 page_code, unsigned char scsi3addr[],
 188                        int cmd_type);
 189static int sendcmd_withirq_core(ctlr_info_t *h, CommandList_struct *c,
 190        int attempt_retry);
 191static int process_sendcmd_error(ctlr_info_t *h, CommandList_struct *c);
 192
 193static int add_to_scan_list(struct ctlr_info *h);
 194static int scan_thread(void *data);
 195static int check_for_unit_attention(ctlr_info_t *h, CommandList_struct *c);
 196static void cciss_hba_release(struct device *dev);
 197static void cciss_device_release(struct device *dev);
 198static void cciss_free_gendisk(ctlr_info_t *h, int drv_index);
 199static void cciss_free_drive_info(ctlr_info_t *h, int drv_index);
 200static inline u32 next_command(ctlr_info_t *h);
 201static int __devinit cciss_find_cfg_addrs(struct pci_dev *pdev,
 202        void __iomem *vaddr, u32 *cfg_base_addr, u64 *cfg_base_addr_index,
 203        u64 *cfg_offset);
 204static int __devinit cciss_pci_find_memory_BAR(struct pci_dev *pdev,
 205        unsigned long *memory_bar);
 206static inline u32 cciss_tag_discard_error_bits(ctlr_info_t *h, u32 tag);
 207static __devinit int write_driver_ver_to_cfgtable(
 208        CfgTable_struct __iomem *cfgtable);
 209
 210/* performant mode helper functions */
 211static void  calc_bucket_map(int *bucket, int num_buckets, int nsgs,
 212                                int *bucket_map);
 213static void cciss_put_controller_into_performant_mode(ctlr_info_t *h);
 214
 215#ifdef CONFIG_PROC_FS
 216static void cciss_procinit(ctlr_info_t *h);
 217#else
 218static void cciss_procinit(ctlr_info_t *h)
 219{
 220}
 221#endif                          /* CONFIG_PROC_FS */
 222
 223#ifdef CONFIG_COMPAT
 224static int cciss_compat_ioctl(struct block_device *, fmode_t,
 225                              unsigned, unsigned long);
 226#endif
 227
 228static const struct block_device_operations cciss_fops = {
 229        .owner = THIS_MODULE,
 230        .open = cciss_unlocked_open,
 231        .release = cciss_release,
 232        .ioctl = do_ioctl,
 233        .getgeo = cciss_getgeo,
 234#ifdef CONFIG_COMPAT
 235        .compat_ioctl = cciss_compat_ioctl,
 236#endif
 237        .revalidate_disk = cciss_revalidate,
 238};
 239
 240/* set_performant_mode: Modify the tag for cciss performant
 241 * set bit 0 for pull model, bits 3-1 for block fetch
 242 * register number
 243 */
 244static void set_performant_mode(ctlr_info_t *h, CommandList_struct *c)
 245{
 246        if (likely(h->transMethod & CFGTBL_Trans_Performant))
 247                c->busaddr |= 1 | (h->blockFetchTable[c->Header.SGList] << 1);
 248}
 249
 250/*
 251 * Enqueuing and dequeuing functions for cmdlists.
 252 */
 253static inline void addQ(struct list_head *list, CommandList_struct *c)
 254{
 255        list_add_tail(&c->list, list);
 256}
 257
 258static inline void removeQ(CommandList_struct *c)
 259{
 260        /*
 261         * After kexec/dump some commands might still
 262         * be in flight, which the firmware will try
 263         * to complete. Resetting the firmware doesn't work
 264         * with old fw revisions, so we have to mark
 265         * them off as 'stale' to prevent the driver from
 266         * falling over.
 267         */
 268        if (WARN_ON(list_empty(&c->list))) {
 269                c->cmd_type = CMD_MSG_STALE;
 270                return;
 271        }
 272
 273        list_del_init(&c->list);
 274}
 275
 276static void enqueue_cmd_and_start_io(ctlr_info_t *h,
 277        CommandList_struct *c)
 278{
 279        unsigned long flags;
 280        set_performant_mode(h, c);
 281        spin_lock_irqsave(&h->lock, flags);
 282        addQ(&h->reqQ, c);
 283        h->Qdepth++;
 284        if (h->Qdepth > h->maxQsinceinit)
 285                h->maxQsinceinit = h->Qdepth;
 286        start_io(h);
 287        spin_unlock_irqrestore(&h->lock, flags);
 288}
 289
 290static void cciss_free_sg_chain_blocks(SGDescriptor_struct **cmd_sg_list,
 291        int nr_cmds)
 292{
 293        int i;
 294
 295        if (!cmd_sg_list)
 296                return;
 297        for (i = 0; i < nr_cmds; i++) {
 298                kfree(cmd_sg_list[i]);
 299                cmd_sg_list[i] = NULL;
 300        }
 301        kfree(cmd_sg_list);
 302}
 303
 304static SGDescriptor_struct **cciss_allocate_sg_chain_blocks(
 305        ctlr_info_t *h, int chainsize, int nr_cmds)
 306{
 307        int j;
 308        SGDescriptor_struct **cmd_sg_list;
 309
 310        if (chainsize <= 0)
 311                return NULL;
 312
 313        cmd_sg_list = kmalloc(sizeof(*cmd_sg_list) * nr_cmds, GFP_KERNEL);
 314        if (!cmd_sg_list)
 315                return NULL;
 316
 317        /* Build up chain blocks for each command */
 318        for (j = 0; j < nr_cmds; j++) {
 319                /* Need a block of chainsized s/g elements. */
 320                cmd_sg_list[j] = kmalloc((chainsize *
 321                        sizeof(*cmd_sg_list[j])), GFP_KERNEL);
 322                if (!cmd_sg_list[j]) {
 323                        dev_err(&h->pdev->dev, "Cannot get memory "
 324                                "for s/g chains.\n");
 325                        goto clean;
 326                }
 327        }
 328        return cmd_sg_list;
 329clean:
 330        cciss_free_sg_chain_blocks(cmd_sg_list, nr_cmds);
 331        return NULL;
 332}
 333
 334static void cciss_unmap_sg_chain_block(ctlr_info_t *h, CommandList_struct *c)
 335{
 336        SGDescriptor_struct *chain_sg;
 337        u64bit temp64;
 338
 339        if (c->Header.SGTotal <= h->max_cmd_sgentries)
 340                return;
 341
 342        chain_sg = &c->SG[h->max_cmd_sgentries - 1];
 343        temp64.val32.lower = chain_sg->Addr.lower;
 344        temp64.val32.upper = chain_sg->Addr.upper;
 345        pci_unmap_single(h->pdev, temp64.val, chain_sg->Len, PCI_DMA_TODEVICE);
 346}
 347
 348static void cciss_map_sg_chain_block(ctlr_info_t *h, CommandList_struct *c,
 349        SGDescriptor_struct *chain_block, int len)
 350{
 351        SGDescriptor_struct *chain_sg;
 352        u64bit temp64;
 353
 354        chain_sg = &c->SG[h->max_cmd_sgentries - 1];
 355        chain_sg->Ext = CCISS_SG_CHAIN;
 356        chain_sg->Len = len;
 357        temp64.val = pci_map_single(h->pdev, chain_block, len,
 358                                PCI_DMA_TODEVICE);
 359        chain_sg->Addr.lower = temp64.val32.lower;
 360        chain_sg->Addr.upper = temp64.val32.upper;
 361}
 362
 363#include "cciss_scsi.c"         /* For SCSI tape support */
 364
 365static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
 366        "UNKNOWN"
 367};
 368#define RAID_UNKNOWN (ARRAY_SIZE(raid_label)-1)
 369
 370#ifdef CONFIG_PROC_FS
 371
 372/*
 373 * Report information about this controller.
 374 */
 375#define ENG_GIG 1000000000
 376#define ENG_GIG_FACTOR (ENG_GIG/512)
 377#define ENGAGE_SCSI     "engage scsi"
 378
 379static void cciss_seq_show_header(struct seq_file *seq)
 380{
 381        ctlr_info_t *h = seq->private;
 382
 383        seq_printf(seq, "%s: HP %s Controller\n"
 384                "Board ID: 0x%08lx\n"
 385                "Firmware Version: %c%c%c%c\n"
 386                "IRQ: %d\n"
 387                "Logical drives: %d\n"
 388                "Current Q depth: %d\n"
 389                "Current # commands on controller: %d\n"
 390                "Max Q depth since init: %d\n"
 391                "Max # commands on controller since init: %d\n"
 392                "Max SG entries since init: %d\n",
 393                h->devname,
 394                h->product_name,
 395                (unsigned long)h->board_id,
 396                h->firm_ver[0], h->firm_ver[1], h->firm_ver[2],
 397                h->firm_ver[3], (unsigned int)h->intr[h->intr_mode],
 398                h->num_luns,
 399                h->Qdepth, h->commands_outstanding,
 400                h->maxQsinceinit, h->max_outstanding, h->maxSG);
 401
 402#ifdef CONFIG_CISS_SCSI_TAPE
 403        cciss_seq_tape_report(seq, h);
 404#endif /* CONFIG_CISS_SCSI_TAPE */
 405}
 406
 407static void *cciss_seq_start(struct seq_file *seq, loff_t *pos)
 408{
 409        ctlr_info_t *h = seq->private;
 410        unsigned long flags;
 411
 412        /* prevent displaying bogus info during configuration
 413         * or deconfiguration of a logical volume
 414         */
 415        spin_lock_irqsave(&h->lock, flags);
 416        if (h->busy_configuring) {
 417                spin_unlock_irqrestore(&h->lock, flags);
 418                return ERR_PTR(-EBUSY);
 419        }
 420        h->busy_configuring = 1;
 421        spin_unlock_irqrestore(&h->lock, flags);
 422
 423        if (*pos == 0)
 424                cciss_seq_show_header(seq);
 425
 426        return pos;
 427}
 428
 429static int cciss_seq_show(struct seq_file *seq, void *v)
 430{
 431        sector_t vol_sz, vol_sz_frac;
 432        ctlr_info_t *h = seq->private;
 433        unsigned ctlr = h->ctlr;
 434        loff_t *pos = v;
 435        drive_info_struct *drv = h->drv[*pos];
 436
 437        if (*pos > h->highest_lun)
 438                return 0;
 439
 440        if (drv == NULL) /* it's possible for h->drv[] to have holes. */
 441                return 0;
 442
 443        if (drv->heads == 0)
 444                return 0;
 445
 446        vol_sz = drv->nr_blocks;
 447        vol_sz_frac = sector_div(vol_sz, ENG_GIG_FACTOR);
 448        vol_sz_frac *= 100;
 449        sector_div(vol_sz_frac, ENG_GIG_FACTOR);
 450
 451        if (drv->raid_level < 0 || drv->raid_level > RAID_UNKNOWN)
 452                drv->raid_level = RAID_UNKNOWN;
 453        seq_printf(seq, "cciss/c%dd%d:"
 454                        "\t%4u.%02uGB\tRAID %s\n",
 455                        ctlr, (int) *pos, (int)vol_sz, (int)vol_sz_frac,
 456                        raid_label[drv->raid_level]);
 457        return 0;
 458}
 459
 460static void *cciss_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 461{
 462        ctlr_info_t *h = seq->private;
 463
 464        if (*pos > h->highest_lun)
 465                return NULL;
 466        *pos += 1;
 467
 468        return pos;
 469}
 470
 471static void cciss_seq_stop(struct seq_file *seq, void *v)
 472{
 473        ctlr_info_t *h = seq->private;
 474
 475        /* Only reset h->busy_configuring if we succeeded in setting
 476         * it during cciss_seq_start. */
 477        if (v == ERR_PTR(-EBUSY))
 478                return;
 479
 480        h->busy_configuring = 0;
 481}
 482
 483static const struct seq_operations cciss_seq_ops = {
 484        .start = cciss_seq_start,
 485        .show  = cciss_seq_show,
 486        .next  = cciss_seq_next,
 487        .stop  = cciss_seq_stop,
 488};
 489
 490static int cciss_seq_open(struct inode *inode, struct file *file)
 491{
 492        int ret = seq_open(file, &cciss_seq_ops);
 493        struct seq_file *seq = file->private_data;
 494
 495        if (!ret)
 496                seq->private = PDE(inode)->data;
 497
 498        return ret;
 499}
 500
 501static ssize_t
 502cciss_proc_write(struct file *file, const char __user *buf,
 503                 size_t length, loff_t *ppos)
 504{
 505        int err;
 506        char *buffer;
 507
 508#ifndef CONFIG_CISS_SCSI_TAPE
 509        return -EINVAL;
 510#endif
 511
 512        if (!buf || length > PAGE_SIZE - 1)
 513                return -EINVAL;
 514
 515        buffer = (char *)__get_free_page(GFP_KERNEL);
 516        if (!buffer)
 517                return -ENOMEM;
 518
 519        err = -EFAULT;
 520        if (copy_from_user(buffer, buf, length))
 521                goto out;
 522        buffer[length] = '\0';
 523
 524#ifdef CONFIG_CISS_SCSI_TAPE
 525        if (strncmp(ENGAGE_SCSI, buffer, sizeof ENGAGE_SCSI - 1) == 0) {
 526                struct seq_file *seq = file->private_data;
 527                ctlr_info_t *h = seq->private;
 528
 529                err = cciss_engage_scsi(h);
 530                if (err == 0)
 531                        err = length;
 532        } else
 533#endif /* CONFIG_CISS_SCSI_TAPE */
 534                err = -EINVAL;
 535        /* might be nice to have "disengage" too, but it's not
 536           safely possible. (only 1 module use count, lock issues.) */
 537
 538out:
 539        free_page((unsigned long)buffer);
 540        return err;
 541}
 542
 543static const struct file_operations cciss_proc_fops = {
 544        .owner   = THIS_MODULE,
 545        .open    = cciss_seq_open,
 546        .read    = seq_read,
 547        .llseek  = seq_lseek,
 548        .release = seq_release,
 549        .write   = cciss_proc_write,
 550};
 551
 552static void __devinit cciss_procinit(ctlr_info_t *h)
 553{
 554        struct proc_dir_entry *pde;
 555
 556        if (proc_cciss == NULL)
 557                proc_cciss = proc_mkdir("driver/cciss", NULL);
 558        if (!proc_cciss)
 559                return;
 560        pde = proc_create_data(h->devname, S_IWUSR | S_IRUSR | S_IRGRP |
 561                                        S_IROTH, proc_cciss,
 562                                        &cciss_proc_fops, h);
 563}
 564#endif                          /* CONFIG_PROC_FS */
 565
 566#define MAX_PRODUCT_NAME_LEN 19
 567
 568#define to_hba(n) container_of(n, struct ctlr_info, dev)
 569#define to_drv(n) container_of(n, drive_info_struct, dev)
 570
 571/* List of controllers which cannot be hard reset on kexec with reset_devices */
 572static u32 unresettable_controller[] = {
 573        0x324a103C, /* Smart Array P712m */
 574        0x324b103C, /* SmartArray P711m */
 575        0x3223103C, /* Smart Array P800 */
 576        0x3234103C, /* Smart Array P400 */
 577        0x3235103C, /* Smart Array P400i */
 578        0x3211103C, /* Smart Array E200i */
 579        0x3212103C, /* Smart Array E200 */
 580        0x3213103C, /* Smart Array E200i */
 581        0x3214103C, /* Smart Array E200i */
 582        0x3215103C, /* Smart Array E200i */
 583        0x3237103C, /* Smart Array E500 */
 584        0x323D103C, /* Smart Array P700m */
 585        0x409C0E11, /* Smart Array 6400 */
 586        0x409D0E11, /* Smart Array 6400 EM */
 587};
 588
 589/* List of controllers which cannot even be soft reset */
 590static u32 soft_unresettable_controller[] = {
 591        0x409C0E11, /* Smart Array 6400 */
 592        0x409D0E11, /* Smart Array 6400 EM */
 593};
 594
 595static int ctlr_is_hard_resettable(u32 board_id)
 596{
 597        int i;
 598
 599        for (i = 0; i < ARRAY_SIZE(unresettable_controller); i++)
 600                if (unresettable_controller[i] == board_id)
 601                        return 0;
 602        return 1;
 603}
 604
 605static int ctlr_is_soft_resettable(u32 board_id)
 606{
 607        int i;
 608
 609        for (i = 0; i < ARRAY_SIZE(soft_unresettable_controller); i++)
 610                if (soft_unresettable_controller[i] == board_id)
 611                        return 0;
 612        return 1;
 613}
 614
 615static int ctlr_is_resettable(u32 board_id)
 616{
 617        return ctlr_is_hard_resettable(board_id) ||
 618                ctlr_is_soft_resettable(board_id);
 619}
 620
 621static ssize_t host_show_resettable(struct device *dev,
 622                                    struct device_attribute *attr,
 623                                    char *buf)
 624{
 625        struct ctlr_info *h = to_hba(dev);
 626
 627        return snprintf(buf, 20, "%d\n", ctlr_is_resettable(h->board_id));
 628}
 629static DEVICE_ATTR(resettable, S_IRUGO, host_show_resettable, NULL);
 630
 631static ssize_t host_store_rescan(struct device *dev,
 632                                 struct device_attribute *attr,
 633                                 const char *buf, size_t count)
 634{
 635        struct ctlr_info *h = to_hba(dev);
 636
 637        add_to_scan_list(h);
 638        wake_up_process(cciss_scan_thread);
 639        wait_for_completion_interruptible(&h->scan_wait);
 640
 641        return count;
 642}
 643static DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan);
 644
 645static ssize_t host_show_transport_mode(struct device *dev,
 646                                 struct device_attribute *attr,
 647                                 char *buf)
 648{
 649        struct ctlr_info *h = to_hba(dev);
 650
 651        return snprintf(buf, 20, "%s\n",
 652                h->transMethod & CFGTBL_Trans_Performant ?
 653                        "performant" : "simple");
 654}
 655static DEVICE_ATTR(transport_mode, S_IRUGO, host_show_transport_mode, NULL);
 656
 657static ssize_t dev_show_unique_id(struct device *dev,
 658                                 struct device_attribute *attr,
 659                                 char *buf)
 660{
 661        drive_info_struct *drv = to_drv(dev);
 662        struct ctlr_info *h = to_hba(drv->dev.parent);
 663        __u8 sn[16];
 664        unsigned long flags;
 665        int ret = 0;
 666
 667        spin_lock_irqsave(&h->lock, flags);
 668        if (h->busy_configuring)
 669                ret = -EBUSY;
 670        else
 671                memcpy(sn, drv->serial_no, sizeof(sn));
 672        spin_unlock_irqrestore(&h->lock, flags);
 673
 674        if (ret)
 675                return ret;
 676        else
 677                return snprintf(buf, 16 * 2 + 2,
 678                                "%02X%02X%02X%02X%02X%02X%02X%02X"
 679                                "%02X%02X%02X%02X%02X%02X%02X%02X\n",
 680                                sn[0], sn[1], sn[2], sn[3],
 681                                sn[4], sn[5], sn[6], sn[7],
 682                                sn[8], sn[9], sn[10], sn[11],
 683                                sn[12], sn[13], sn[14], sn[15]);
 684}
 685static DEVICE_ATTR(unique_id, S_IRUGO, dev_show_unique_id, NULL);
 686
 687static ssize_t dev_show_vendor(struct device *dev,
 688                               struct device_attribute *attr,
 689                               char *buf)
 690{
 691        drive_info_struct *drv = to_drv(dev);
 692        struct ctlr_info *h = to_hba(drv->dev.parent);
 693        char vendor[VENDOR_LEN + 1];
 694        unsigned long flags;
 695        int ret = 0;
 696
 697        spin_lock_irqsave(&h->lock, flags);
 698        if (h->busy_configuring)
 699                ret = -EBUSY;
 700        else
 701                memcpy(vendor, drv->vendor, VENDOR_LEN + 1);
 702        spin_unlock_irqrestore(&h->lock, flags);
 703
 704        if (ret)
 705                return ret;
 706        else
 707                return snprintf(buf, sizeof(vendor) + 1, "%s\n", drv->vendor);
 708}
 709static DEVICE_ATTR(vendor, S_IRUGO, dev_show_vendor, NULL);
 710
 711static ssize_t dev_show_model(struct device *dev,
 712                              struct device_attribute *attr,
 713                              char *buf)
 714{
 715        drive_info_struct *drv = to_drv(dev);
 716        struct ctlr_info *h = to_hba(drv->dev.parent);
 717        char model[MODEL_LEN + 1];
 718        unsigned long flags;
 719        int ret = 0;
 720
 721        spin_lock_irqsave(&h->lock, flags);
 722        if (h->busy_configuring)
 723                ret = -EBUSY;
 724        else
 725                memcpy(model, drv->model, MODEL_LEN + 1);
 726        spin_unlock_irqrestore(&h->lock, flags);
 727
 728        if (ret)
 729                return ret;
 730        else
 731                return snprintf(buf, sizeof(model) + 1, "%s\n", drv->model);
 732}
 733static DEVICE_ATTR(model, S_IRUGO, dev_show_model, NULL);
 734
 735static ssize_t dev_show_rev(struct device *dev,
 736                            struct device_attribute *attr,
 737                            char *buf)
 738{
 739        drive_info_struct *drv = to_drv(dev);
 740        struct ctlr_info *h = to_hba(drv->dev.parent);
 741        char rev[REV_LEN + 1];
 742        unsigned long flags;
 743        int ret = 0;
 744
 745        spin_lock_irqsave(&h->lock, flags);
 746        if (h->busy_configuring)
 747                ret = -EBUSY;
 748        else
 749                memcpy(rev, drv->rev, REV_LEN + 1);
 750        spin_unlock_irqrestore(&h->lock, flags);
 751
 752        if (ret)
 753                return ret;
 754        else
 755                return snprintf(buf, sizeof(rev) + 1, "%s\n", drv->rev);
 756}
 757static DEVICE_ATTR(rev, S_IRUGO, dev_show_rev, NULL);
 758
 759static ssize_t cciss_show_lunid(struct device *dev,
 760                                struct device_attribute *attr, char *buf)
 761{
 762        drive_info_struct *drv = to_drv(dev);
 763        struct ctlr_info *h = to_hba(drv->dev.parent);
 764        unsigned long flags;
 765        unsigned char lunid[8];
 766
 767        spin_lock_irqsave(&h->lock, flags);
 768        if (h->busy_configuring) {
 769                spin_unlock_irqrestore(&h->lock, flags);
 770                return -EBUSY;
 771        }
 772        if (!drv->heads) {
 773                spin_unlock_irqrestore(&h->lock, flags);
 774                return -ENOTTY;
 775        }
 776        memcpy(lunid, drv->LunID, sizeof(lunid));
 777        spin_unlock_irqrestore(&h->lock, flags);
 778        return snprintf(buf, 20, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
 779                lunid[0], lunid[1], lunid[2], lunid[3],
 780                lunid[4], lunid[5], lunid[6], lunid[7]);
 781}
 782static DEVICE_ATTR(lunid, S_IRUGO, cciss_show_lunid, NULL);
 783
 784static ssize_t cciss_show_raid_level(struct device *dev,
 785                                     struct device_attribute *attr, char *buf)
 786{
 787        drive_info_struct *drv = to_drv(dev);
 788        struct ctlr_info *h = to_hba(drv->dev.parent);
 789        int raid;
 790        unsigned long flags;
 791
 792        spin_lock_irqsave(&h->lock, flags);
 793        if (h->busy_configuring) {
 794                spin_unlock_irqrestore(&h->lock, flags);
 795                return -EBUSY;
 796        }
 797        raid = drv->raid_level;
 798        spin_unlock_irqrestore(&h->lock, flags);
 799        if (raid < 0 || raid > RAID_UNKNOWN)
 800                raid = RAID_UNKNOWN;
 801
 802        return snprintf(buf, strlen(raid_label[raid]) + 7, "RAID %s\n",
 803                        raid_label[raid]);
 804}
 805static DEVICE_ATTR(raid_level, S_IRUGO, cciss_show_raid_level, NULL);
 806
 807static ssize_t cciss_show_usage_count(struct device *dev,
 808                                      struct device_attribute *attr, char *buf)
 809{
 810        drive_info_struct *drv = to_drv(dev);
 811        struct ctlr_info *h = to_hba(drv->dev.parent);
 812        unsigned long flags;
 813        int count;
 814
 815        spin_lock_irqsave(&h->lock, flags);
 816        if (h->busy_configuring) {
 817                spin_unlock_irqrestore(&h->lock, flags);
 818                return -EBUSY;
 819        }
 820        count = drv->usage_count;
 821        spin_unlock_irqrestore(&h->lock, flags);
 822        return snprintf(buf, 20, "%d\n", count);
 823}
 824static DEVICE_ATTR(usage_count, S_IRUGO, cciss_show_usage_count, NULL);
 825
 826static struct attribute *cciss_host_attrs[] = {
 827        &dev_attr_rescan.attr,
 828        &dev_attr_resettable.attr,
 829        &dev_attr_transport_mode.attr,
 830        NULL
 831};
 832
 833static struct attribute_group cciss_host_attr_group = {
 834        .attrs = cciss_host_attrs,
 835};
 836
 837static const struct attribute_group *cciss_host_attr_groups[] = {
 838        &cciss_host_attr_group,
 839        NULL
 840};
 841
 842static struct device_type cciss_host_type = {
 843        .name           = "cciss_host",
 844        .groups         = cciss_host_attr_groups,
 845        .release        = cciss_hba_release,
 846};
 847
 848static struct attribute *cciss_dev_attrs[] = {
 849        &dev_attr_unique_id.attr,
 850        &dev_attr_model.attr,
 851        &dev_attr_vendor.attr,
 852        &dev_attr_rev.attr,
 853        &dev_attr_lunid.attr,
 854        &dev_attr_raid_level.attr,
 855        &dev_attr_usage_count.attr,
 856        NULL
 857};
 858
 859static struct attribute_group cciss_dev_attr_group = {
 860        .attrs = cciss_dev_attrs,
 861};
 862
 863static const struct attribute_group *cciss_dev_attr_groups[] = {
 864        &cciss_dev_attr_group,
 865        NULL
 866};
 867
 868static struct device_type cciss_dev_type = {
 869        .name           = "cciss_device",
 870        .groups         = cciss_dev_attr_groups,
 871        .release        = cciss_device_release,
 872};
 873
 874static struct bus_type cciss_bus_type = {
 875        .name           = "cciss",
 876};
 877
 878/*
 879 * cciss_hba_release is called when the reference count
 880 * of h->dev goes to zero.
 881 */
 882static void cciss_hba_release(struct device *dev)
 883{
 884        /*
 885         * nothing to do, but need this to avoid a warning
 886         * about not having a release handler from lib/kref.c.
 887         */
 888}
 889
 890/*
 891 * Initialize sysfs entry for each controller.  This sets up and registers
 892 * the 'cciss#' directory for each individual controller under
 893 * /sys/bus/pci/devices/<dev>/.
 894 */
 895static int cciss_create_hba_sysfs_entry(struct ctlr_info *h)
 896{
 897        device_initialize(&h->dev);
 898        h->dev.type = &cciss_host_type;
 899        h->dev.bus = &cciss_bus_type;
 900        dev_set_name(&h->dev, "%s", h->devname);
 901        h->dev.parent = &h->pdev->dev;
 902
 903        return device_add(&h->dev);
 904}
 905
 906/*
 907 * Remove sysfs entries for an hba.
 908 */
 909static void cciss_destroy_hba_sysfs_entry(struct ctlr_info *h)
 910{
 911        device_del(&h->dev);
 912        put_device(&h->dev); /* final put. */
 913}
 914
 915/* cciss_device_release is called when the reference count
 916 * of h->drv[x]dev goes to zero.
 917 */
 918static void cciss_device_release(struct device *dev)
 919{
 920        drive_info_struct *drv = to_drv(dev);
 921        kfree(drv);
 922}
 923
 924/*
 925 * Initialize sysfs for each logical drive.  This sets up and registers
 926 * the 'c#d#' directory for each individual logical drive under
 927 * /sys/bus/pci/devices/<dev/ccis#/. We also create a link from
 928 * /sys/block/cciss!c#d# to this entry.
 929 */
 930static long cciss_create_ld_sysfs_entry(struct ctlr_info *h,
 931                                       int drv_index)
 932{
 933        struct device *dev;
 934
 935        if (h->drv[drv_index]->device_initialized)
 936                return 0;
 937
 938        dev = &h->drv[drv_index]->dev;
 939        device_initialize(dev);
 940        dev->type = &cciss_dev_type;
 941        dev->bus = &cciss_bus_type;
 942        dev_set_name(dev, "c%dd%d", h->ctlr, drv_index);
 943        dev->parent = &h->dev;
 944        h->drv[drv_index]->device_initialized = 1;
 945        return device_add(dev);
 946}
 947
 948/*
 949 * Remove sysfs entries for a logical drive.
 950 */
 951static void cciss_destroy_ld_sysfs_entry(struct ctlr_info *h, int drv_index,
 952        int ctlr_exiting)
 953{
 954        struct device *dev = &h->drv[drv_index]->dev;
 955
 956        /* special case for c*d0, we only destroy it on controller exit */
 957        if (drv_index == 0 && !ctlr_exiting)
 958                return;
 959
 960        device_del(dev);
 961        put_device(dev); /* the "final" put. */
 962        h->drv[drv_index] = NULL;
 963}
 964
 965/*
 966 * For operations that cannot sleep, a command block is allocated at init,
 967 * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track
 968 * which ones are free or in use.
 969 */
 970static CommandList_struct *cmd_alloc(ctlr_info_t *h)
 971{
 972        CommandList_struct *c;
 973        int i;
 974        u64bit temp64;
 975        dma_addr_t cmd_dma_handle, err_dma_handle;
 976
 977        do {
 978                i = find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds);
 979                if (i == h->nr_cmds)
 980                        return NULL;
 981        } while (test_and_set_bit(i & (BITS_PER_LONG - 1),
 982                  h->cmd_pool_bits + (i / BITS_PER_LONG)) != 0);
 983        c = h->cmd_pool + i;
 984        memset(c, 0, sizeof(CommandList_struct));
 985        cmd_dma_handle = h->cmd_pool_dhandle + i * sizeof(CommandList_struct);
 986        c->err_info = h->errinfo_pool + i;
 987        memset(c->err_info, 0, sizeof(ErrorInfo_struct));
 988        err_dma_handle = h->errinfo_pool_dhandle
 989            + i * sizeof(ErrorInfo_struct);
 990        h->nr_allocs++;
 991
 992        c->cmdindex = i;
 993
 994        INIT_LIST_HEAD(&c->list);
 995        c->busaddr = (__u32) cmd_dma_handle;
 996        temp64.val = (__u64) err_dma_handle;
 997        c->ErrDesc.Addr.lower = temp64.val32.lower;
 998        c->ErrDesc.Addr.upper = temp64.val32.upper;
 999        c->ErrDesc.Len = sizeof(ErrorInfo_struct);
1000
1001        c->ctlr = h->ctlr;
1002        return c;
1003}
1004
1005/* allocate a command using pci_alloc_consistent, used for ioctls,
1006 * etc., not for the main i/o path.
1007 */
1008static CommandList_struct *cmd_special_alloc(ctlr_info_t *h)
1009{
1010        CommandList_struct *c;
1011        u64bit temp64;
1012        dma_addr_t cmd_dma_handle, err_dma_handle;
1013
1014        c = (CommandList_struct *) pci_alloc_consistent(h->pdev,
1015                sizeof(CommandList_struct), &cmd_dma_handle);
1016        if (c == NULL)
1017                return NULL;
1018        memset(c, 0, sizeof(CommandList_struct));
1019
1020        c->cmdindex = -1;
1021
1022        c->err_info = (ErrorInfo_struct *)
1023            pci_alloc_consistent(h->pdev, sizeof(ErrorInfo_struct),
1024                    &err_dma_handle);
1025
1026        if (c->err_info == NULL) {
1027                pci_free_consistent(h->pdev,
1028                        sizeof(CommandList_struct), c, cmd_dma_handle);
1029                return NULL;
1030        }
1031        memset(c->err_info, 0, sizeof(ErrorInfo_struct));
1032
1033        INIT_LIST_HEAD(&c->list);
1034        c->busaddr = (__u32) cmd_dma_handle;
1035        temp64.val = (__u64) err_dma_handle;
1036        c->ErrDesc.Addr.lower = temp64.val32.lower;
1037        c->ErrDesc.Addr.upper = temp64.val32.upper;
1038        c->ErrDesc.Len = sizeof(ErrorInfo_struct);
1039
1040        c->ctlr = h->ctlr;
1041        return c;
1042}
1043
1044static void cmd_free(ctlr_info_t *h, CommandList_struct *c)
1045{
1046        int i;
1047
1048        i = c - h->cmd_pool;
1049        clear_bit(i & (BITS_PER_LONG - 1),
1050                  h->cmd_pool_bits + (i / BITS_PER_LONG));
1051        h->nr_frees++;
1052}
1053
1054static void cmd_special_free(ctlr_info_t *h, CommandList_struct *c)
1055{
1056        u64bit temp64;
1057
1058        temp64.val32.lower = c->ErrDesc.Addr.lower;
1059        temp64.val32.upper = c->ErrDesc.Addr.upper;
1060        pci_free_consistent(h->pdev, sizeof(ErrorInfo_struct),
1061                            c->err_info, (dma_addr_t) temp64.val);
1062        pci_free_consistent(h->pdev, sizeof(CommandList_struct), c,
1063                (dma_addr_t) cciss_tag_discard_error_bits(h, (u32) c->busaddr));
1064}
1065
1066static inline ctlr_info_t *get_host(struct gendisk *disk)
1067{
1068        return disk->queue->queuedata;
1069}
1070
1071static inline drive_info_struct *get_drv(struct gendisk *disk)
1072{
1073        return disk->private_data;
1074}
1075
1076/*
1077 * Open.  Make sure the device is really there.
1078 */
1079static int cciss_open(struct block_device *bdev, fmode_t mode)
1080{
1081        ctlr_info_t *h = get_host(bdev->bd_disk);
1082        drive_info_struct *drv = get_drv(bdev->bd_disk);
1083
1084        dev_dbg(&h->pdev->dev, "cciss_open %s\n", bdev->bd_disk->disk_name);
1085        if (drv->busy_configuring)
1086                return -EBUSY;
1087        /*
1088         * Root is allowed to open raw volume zero even if it's not configured
1089         * so array config can still work. Root is also allowed to open any
1090         * volume that has a LUN ID, so it can issue IOCTL to reread the
1091         * disk information.  I don't think I really like this
1092         * but I'm already using way to many device nodes to claim another one
1093         * for "raw controller".
1094         */
1095        if (drv->heads == 0) {
1096                if (MINOR(bdev->bd_dev) != 0) { /* not node 0? */
1097                        /* if not node 0 make sure it is a partition = 0 */
1098                        if (MINOR(bdev->bd_dev) & 0x0f) {
1099                                return -ENXIO;
1100                                /* if it is, make sure we have a LUN ID */
1101                        } else if (memcmp(drv->LunID, CTLR_LUNID,
1102                                sizeof(drv->LunID))) {
1103                                return -ENXIO;
1104                        }
1105                }
1106                if (!capable(CAP_SYS_ADMIN))
1107                        return -EPERM;
1108        }
1109        drv->usage_count++;
1110        h->usage_count++;
1111        return 0;
1112}
1113
1114static int cciss_unlocked_open(struct block_device *bdev, fmode_t mode)
1115{
1116        int ret;
1117
1118        mutex_lock(&cciss_mutex);
1119        ret = cciss_open(bdev, mode);
1120        mutex_unlock(&cciss_mutex);
1121
1122        return ret;
1123}
1124
1125/*
1126 * Close.  Sync first.
1127 */
1128static int cciss_release(struct gendisk *disk, fmode_t mode)
1129{
1130        ctlr_info_t *h;
1131        drive_info_struct *drv;
1132
1133        mutex_lock(&cciss_mutex);
1134        h = get_host(disk);
1135        drv = get_drv(disk);
1136        dev_dbg(&h->pdev->dev, "cciss_release %s\n", disk->disk_name);
1137        drv->usage_count--;
1138        h->usage_count--;
1139        mutex_unlock(&cciss_mutex);
1140        return 0;
1141}
1142
1143static int do_ioctl(struct block_device *bdev, fmode_t mode,
1144                    unsigned cmd, unsigned long arg)
1145{
1146        int ret;
1147        mutex_lock(&cciss_mutex);
1148        ret = cciss_ioctl(bdev, mode, cmd, arg);
1149        mutex_unlock(&cciss_mutex);
1150        return ret;
1151}
1152
1153#ifdef CONFIG_COMPAT
1154
1155static int cciss_ioctl32_passthru(struct block_device *bdev, fmode_t mode,
1156                                  unsigned cmd, unsigned long arg);
1157static int cciss_ioctl32_big_passthru(struct block_device *bdev, fmode_t mode,
1158                                      unsigned cmd, unsigned long arg);
1159
1160static int cciss_compat_ioctl(struct block_device *bdev, fmode_t mode,
1161                              unsigned cmd, unsigned long arg)
1162{
1163        switch (cmd) {
1164        case CCISS_GETPCIINFO:
1165        case CCISS_GETINTINFO:
1166        case CCISS_SETINTINFO:
1167        case CCISS_GETNODENAME:
1168        case CCISS_SETNODENAME:
1169        case CCISS_GETHEARTBEAT:
1170        case CCISS_GETBUSTYPES:
1171        case CCISS_GETFIRMVER:
1172        case CCISS_GETDRIVVER:
1173        case CCISS_REVALIDVOLS:
1174        case CCISS_DEREGDISK:
1175        case CCISS_REGNEWDISK:
1176        case CCISS_REGNEWD:
1177        case CCISS_RESCANDISK:
1178        case CCISS_GETLUNINFO:
1179                return do_ioctl(bdev, mode, cmd, arg);
1180
1181        case CCISS_PASSTHRU32:
1182                return cciss_ioctl32_passthru(bdev, mode, cmd, arg);
1183        case CCISS_BIG_PASSTHRU32:
1184                return cciss_ioctl32_big_passthru(bdev, mode, cmd, arg);
1185
1186        default:
1187                return -ENOIOCTLCMD;
1188        }
1189}
1190
1191static int cciss_ioctl32_passthru(struct block_device *bdev, fmode_t mode,
1192                                  unsigned cmd, unsigned long arg)
1193{
1194        IOCTL32_Command_struct __user *arg32 =
1195            (IOCTL32_Command_struct __user *) arg;
1196        IOCTL_Command_struct arg64;
1197        IOCTL_Command_struct __user *p = compat_alloc_user_space(sizeof(arg64));
1198        int err;
1199        u32 cp;
1200
1201        err = 0;
1202        err |=
1203            copy_from_user(&arg64.LUN_info, &arg32->LUN_info,
1204                           sizeof(arg64.LUN_info));
1205        err |=
1206            copy_from_user(&arg64.Request, &arg32->Request,
1207                           sizeof(arg64.Request));
1208        err |=
1209            copy_from_user(&arg64.error_info, &arg32->error_info,
1210                           sizeof(arg64.error_info));
1211        err |= get_user(arg64.buf_size, &arg32->buf_size);
1212        err |= get_user(cp, &arg32->buf);
1213        arg64.buf = compat_ptr(cp);
1214        err |= copy_to_user(p, &arg64, sizeof(arg64));
1215
1216        if (err)
1217                return -EFAULT;
1218
1219        err = do_ioctl(bdev, mode, CCISS_PASSTHRU, (unsigned long)p);
1220        if (err)
1221                return err;
1222        err |=
1223            copy_in_user(&arg32->error_info, &p->error_info,
1224                         sizeof(arg32->error_info));
1225        if (err)
1226                return -EFAULT;
1227        return err;
1228}
1229
1230static int cciss_ioctl32_big_passthru(struct block_device *bdev, fmode_t mode,
1231                                      unsigned cmd, unsigned long arg)
1232{
1233        BIG_IOCTL32_Command_struct __user *arg32 =
1234            (BIG_IOCTL32_Command_struct __user *) arg;
1235        BIG_IOCTL_Command_struct arg64;
1236        BIG_IOCTL_Command_struct __user *p =
1237            compat_alloc_user_space(sizeof(arg64));
1238        int err;
1239        u32 cp;
1240
1241        memset(&arg64, 0, sizeof(arg64));
1242        err = 0;
1243        err |=
1244            copy_from_user(&arg64.LUN_info, &arg32->LUN_info,
1245                           sizeof(arg64.LUN_info));
1246        err |=
1247            copy_from_user(&arg64.Request, &arg32->Request,
1248                           sizeof(arg64.Request));
1249        err |=
1250            copy_from_user(&arg64.error_info, &arg32->error_info,
1251                           sizeof(arg64.error_info));
1252        err |= get_user(arg64.buf_size, &arg32->buf_size);
1253        err |= get_user(arg64.malloc_size, &arg32->malloc_size);
1254        err |= get_user(cp, &arg32->buf);
1255        arg64.buf = compat_ptr(cp);
1256        err |= copy_to_user(p, &arg64, sizeof(arg64));
1257
1258        if (err)
1259                return -EFAULT;
1260
1261        err = do_ioctl(bdev, mode, CCISS_BIG_PASSTHRU, (unsigned long)p);
1262        if (err)
1263                return err;
1264        err |=
1265            copy_in_user(&arg32->error_info, &p->error_info,
1266                         sizeof(arg32->error_info));
1267        if (err)
1268                return -EFAULT;
1269        return err;
1270}
1271#endif
1272
1273static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo)
1274{
1275        drive_info_struct *drv = get_drv(bdev->bd_disk);
1276
1277        if (!drv->cylinders)
1278                return -ENXIO;
1279
1280        geo->heads = drv->heads;
1281        geo->sectors = drv->sectors;
1282        geo->cylinders = drv->cylinders;
1283        return 0;
1284}
1285
1286static void check_ioctl_unit_attention(ctlr_info_t *h, CommandList_struct *c)
1287{
1288        if (c->err_info->CommandStatus == CMD_TARGET_STATUS &&
1289                        c->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION)
1290                (void)check_for_unit_attention(h, c);
1291}
1292
1293static int cciss_getpciinfo(ctlr_info_t *h, void __user *argp)
1294{
1295        cciss_pci_info_struct pciinfo;
1296
1297        if (!argp)
1298                return -EINVAL;
1299        pciinfo.domain = pci_domain_nr(h->pdev->bus);
1300        pciinfo.bus = h->pdev->bus->number;
1301        pciinfo.dev_fn = h->pdev->devfn;
1302        pciinfo.board_id = h->board_id;
1303        if (copy_to_user(argp, &pciinfo, sizeof(cciss_pci_info_struct)))
1304                return -EFAULT;
1305        return 0;
1306}
1307
1308static int cciss_getintinfo(ctlr_info_t *h, void __user *argp)
1309{
1310        cciss_coalint_struct intinfo;
1311
1312        if (!argp)
1313                return -EINVAL;
1314        intinfo.delay = readl(&h->cfgtable->HostWrite.CoalIntDelay);
1315        intinfo.count = readl(&h->cfgtable->HostWrite.CoalIntCount);
1316        if (copy_to_user
1317            (argp, &intinfo, sizeof(cciss_coalint_struct)))
1318                return -EFAULT;
1319        return 0;
1320}
1321
1322static int cciss_setintinfo(ctlr_info_t *h, void __user *argp)
1323{
1324        cciss_coalint_struct intinfo;
1325        unsigned long flags;
1326        int i;
1327
1328        if (!argp)
1329                return -EINVAL;
1330        if (!capable(CAP_SYS_ADMIN))
1331                return -EPERM;
1332        if (copy_from_user(&intinfo, argp, sizeof(intinfo)))
1333                return -EFAULT;
1334        if ((intinfo.delay == 0) && (intinfo.count == 0))
1335                return -EINVAL;
1336        spin_lock_irqsave(&h->lock, flags);
1337        /* Update the field, and then ring the doorbell */
1338        writel(intinfo.delay, &(h->cfgtable->HostWrite.CoalIntDelay));
1339        writel(intinfo.count, &(h->cfgtable->HostWrite.CoalIntCount));
1340        writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
1341
1342        for (i = 0; i < MAX_IOCTL_CONFIG_WAIT; i++) {
1343                if (!(readl(h->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq))
1344                        break;
1345                udelay(1000); /* delay and try again */
1346        }
1347        spin_unlock_irqrestore(&h->lock, flags);
1348        if (i >= MAX_IOCTL_CONFIG_WAIT)
1349                return -EAGAIN;
1350        return 0;
1351}
1352
1353static int cciss_getnodename(ctlr_info_t *h, void __user *argp)
1354{
1355        NodeName_type NodeName;
1356        int i;
1357
1358        if (!argp)
1359                return -EINVAL;
1360        for (i = 0; i < 16; i++)
1361                NodeName[i] = readb(&h->cfgtable->ServerName[i]);
1362        if (copy_to_user(argp, NodeName, sizeof(NodeName_type)))
1363                return -EFAULT;
1364        return 0;
1365}
1366
1367static int cciss_setnodename(ctlr_info_t *h, void __user *argp)
1368{
1369        NodeName_type NodeName;
1370        unsigned long flags;
1371        int i;
1372
1373        if (!argp)
1374                return -EINVAL;
1375        if (!capable(CAP_SYS_ADMIN))
1376                return -EPERM;
1377        if (copy_from_user(NodeName, argp, sizeof(NodeName_type)))
1378                return -EFAULT;
1379        spin_lock_irqsave(&h->lock, flags);
1380        /* Update the field, and then ring the doorbell */
1381        for (i = 0; i < 16; i++)
1382                writeb(NodeName[i], &h->cfgtable->ServerName[i]);
1383        writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
1384        for (i = 0; i < MAX_IOCTL_CONFIG_WAIT; i++) {
1385                if (!(readl(h->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq))
1386                        break;
1387                udelay(1000); /* delay and try again */
1388        }
1389        spin_unlock_irqrestore(&h->lock, flags);
1390        if (i >= MAX_IOCTL_CONFIG_WAIT)
1391                return -EAGAIN;
1392        return 0;
1393}
1394
1395static int cciss_getheartbeat(ctlr_info_t *h, void __user *argp)
1396{
1397        Heartbeat_type heartbeat;
1398
1399        if (!argp)
1400                return -EINVAL;
1401        heartbeat = readl(&h->cfgtable->HeartBeat);
1402        if (copy_to_user(argp, &heartbeat, sizeof(Heartbeat_type)))
1403                return -EFAULT;
1404        return 0;
1405}
1406
1407static int cciss_getbustypes(ctlr_info_t *h, void __user *argp)
1408{
1409        BusTypes_type BusTypes;
1410
1411        if (!argp)
1412                return -EINVAL;
1413        BusTypes = readl(&h->cfgtable->BusTypes);
1414        if (copy_to_user(argp, &BusTypes, sizeof(BusTypes_type)))
1415                return -EFAULT;
1416        return 0;
1417}
1418
1419static int cciss_getfirmver(ctlr_info_t *h, void __user *argp)
1420{
1421        FirmwareVer_type firmware;
1422
1423        if (!argp)
1424                return -EINVAL;
1425        memcpy(firmware, h->firm_ver, 4);
1426
1427        if (copy_to_user
1428            (argp, firmware, sizeof(FirmwareVer_type)))
1429                return -EFAULT;
1430        return 0;
1431}
1432
1433static int cciss_getdrivver(ctlr_info_t *h, void __user *argp)
1434{
1435        DriverVer_type DriverVer = DRIVER_VERSION;
1436
1437        if (!argp)
1438                return -EINVAL;
1439        if (copy_to_user(argp, &DriverVer, sizeof(DriverVer_type)))
1440                return -EFAULT;
1441        return 0;
1442}
1443
1444static int cciss_getluninfo(ctlr_info_t *h,
1445        struct gendisk *disk, void __user *argp)
1446{
1447        LogvolInfo_struct luninfo;
1448        drive_info_struct *drv = get_drv(disk);
1449
1450        if (!argp)
1451                return -EINVAL;
1452        memcpy(&luninfo.LunID, drv->LunID, sizeof(luninfo.LunID));
1453        luninfo.num_opens = drv->usage_count;
1454        luninfo.num_parts = 0;
1455        if (copy_to_user(argp, &luninfo, sizeof(LogvolInfo_struct)))
1456                return -EFAULT;
1457        return 0;
1458}
1459
1460static int cciss_passthru(ctlr_info_t *h, void __user *argp)
1461{
1462        IOCTL_Command_struct iocommand;
1463        CommandList_struct *c;
1464        char *buff = NULL;
1465        u64bit temp64;
1466        DECLARE_COMPLETION_ONSTACK(wait);
1467
1468        if (!argp)
1469                return -EINVAL;
1470
1471        if (!capable(CAP_SYS_RAWIO))
1472                return -EPERM;
1473
1474        if (copy_from_user
1475            (&iocommand, argp, sizeof(IOCTL_Command_struct)))
1476                return -EFAULT;
1477        if ((iocommand.buf_size < 1) &&
1478            (iocommand.Request.Type.Direction != XFER_NONE)) {
1479                return -EINVAL;
1480        }
1481        if (iocommand.buf_size > 0) {
1482                buff = kmalloc(iocommand.buf_size, GFP_KERNEL);
1483                if (buff == NULL)
1484                        return -EFAULT;
1485        }
1486        if (iocommand.Request.Type.Direction == XFER_WRITE) {
1487                /* Copy the data into the buffer we created */
1488                if (copy_from_user(buff, iocommand.buf, iocommand.buf_size)) {
1489                        kfree(buff);
1490                        return -EFAULT;
1491                }
1492        } else {
1493                memset(buff, 0, iocommand.buf_size);
1494        }
1495        c = cmd_special_alloc(h);
1496        if (!c) {
1497                kfree(buff);
1498                return -ENOMEM;
1499        }
1500        /* Fill in the command type */
1501        c->cmd_type = CMD_IOCTL_PEND;
1502        /* Fill in Command Header */
1503        c->Header.ReplyQueue = 0;   /* unused in simple mode */
1504        if (iocommand.buf_size > 0) { /* buffer to fill */
1505                c->Header.SGList = 1;
1506                c->Header.SGTotal = 1;
1507        } else { /* no buffers to fill */
1508                c->Header.SGList = 0;
1509                c->Header.SGTotal = 0;
1510        }
1511        c->Header.LUN = iocommand.LUN_info;
1512        /* use the kernel address the cmd block for tag */
1513        c->Header.Tag.lower = c->busaddr;
1514
1515        /* Fill in Request block */
1516        c->Request = iocommand.Request;
1517
1518        /* Fill in the scatter gather information */
1519        if (iocommand.buf_size > 0) {
1520                temp64.val = pci_map_single(h->pdev, buff,
1521                        iocommand.buf_size, PCI_DMA_BIDIRECTIONAL);
1522                c->SG[0].Addr.lower = temp64.val32.lower;
1523                c->SG[0].Addr.upper = temp64.val32.upper;
1524                c->SG[0].Len = iocommand.buf_size;
1525                c->SG[0].Ext = 0;  /* we are not chaining */
1526        }
1527        c->waiting = &wait;
1528
1529        enqueue_cmd_and_start_io(h, c);
1530        wait_for_completion(&wait);
1531
1532        /* unlock the buffers from DMA */
1533        temp64.val32.lower = c->SG[0].Addr.lower;
1534        temp64.val32.upper = c->SG[0].Addr.upper;
1535        pci_unmap_single(h->pdev, (dma_addr_t) temp64.val, iocommand.buf_size,
1536                         PCI_DMA_BIDIRECTIONAL);
1537        check_ioctl_unit_attention(h, c);
1538
1539        /* Copy the error information out */
1540        iocommand.error_info = *(c->err_info);
1541        if (copy_to_user(argp, &iocommand, sizeof(IOCTL_Command_struct))) {
1542                kfree(buff);
1543                cmd_special_free(h, c);
1544                return -EFAULT;
1545        }
1546
1547        if (iocommand.Request.Type.Direction == XFER_READ) {
1548                /* Copy the data out of the buffer we created */
1549                if (copy_to_user(iocommand.buf, buff, iocommand.buf_size)) {
1550                        kfree(buff);
1551                        cmd_special_free(h, c);
1552                        return -EFAULT;
1553                }
1554        }
1555        kfree(buff);
1556        cmd_special_free(h, c);
1557        return 0;
1558}
1559
1560static int cciss_bigpassthru(ctlr_info_t *h, void __user *argp)
1561{
1562        BIG_IOCTL_Command_struct *ioc;
1563        CommandList_struct *c;
1564        unsigned char **buff = NULL;
1565        int *buff_size = NULL;
1566        u64bit temp64;
1567        BYTE sg_used = 0;
1568        int status = 0;
1569        int i;
1570        DECLARE_COMPLETION_ONSTACK(wait);
1571        __u32 left;
1572        __u32 sz;
1573        BYTE __user *data_ptr;
1574
1575        if (!argp)
1576                return -EINVAL;
1577        if (!capable(CAP_SYS_RAWIO))
1578                return -EPERM;
1579        ioc = kmalloc(sizeof(*ioc), GFP_KERNEL);
1580        if (!ioc) {
1581                status = -ENOMEM;
1582                goto cleanup1;
1583        }
1584        if (copy_from_user(ioc, argp, sizeof(*ioc))) {
1585                status = -EFAULT;
1586                goto cleanup1;
1587        }
1588        if ((ioc->buf_size < 1) &&
1589            (ioc->Request.Type.Direction != XFER_NONE)) {
1590                status = -EINVAL;
1591                goto cleanup1;
1592        }
1593        /* Check kmalloc limits  using all SGs */
1594        if (ioc->malloc_size > MAX_KMALLOC_SIZE) {
1595                status = -EINVAL;
1596                goto cleanup1;
1597        }
1598        if (ioc->buf_size > ioc->malloc_size * MAXSGENTRIES) {
1599                status = -EINVAL;
1600                goto cleanup1;
1601        }
1602        buff = kzalloc(MAXSGENTRIES * sizeof(char *), GFP_KERNEL);
1603        if (!buff) {
1604                status = -ENOMEM;
1605                goto cleanup1;
1606        }
1607        buff_size = kmalloc(MAXSGENTRIES * sizeof(int), GFP_KERNEL);
1608        if (!buff_size) {
1609                status = -ENOMEM;
1610                goto cleanup1;
1611        }
1612        left = ioc->buf_size;
1613        data_ptr = ioc->buf;
1614        while (left) {
1615                sz = (left > ioc->malloc_size) ? ioc->malloc_size : left;
1616                buff_size[sg_used] = sz;
1617                buff[sg_used] = kmalloc(sz, GFP_KERNEL);
1618                if (buff[sg_used] == NULL) {
1619                        status = -ENOMEM;
1620                        goto cleanup1;
1621                }
1622                if (ioc->Request.Type.Direction == XFER_WRITE) {
1623                        if (copy_from_user(buff[sg_used], data_ptr, sz)) {
1624                                status = -EFAULT;
1625                                goto cleanup1;
1626                        }
1627                } else {
1628                        memset(buff[sg_used], 0, sz);
1629                }
1630                left -= sz;
1631                data_ptr += sz;
1632                sg_used++;
1633        }
1634        c = cmd_special_alloc(h);
1635        if (!c) {
1636                status = -ENOMEM;
1637                goto cleanup1;
1638        }
1639        c->cmd_type = CMD_IOCTL_PEND;
1640        c->Header.ReplyQueue = 0;
1641        c->Header.SGList = sg_used;
1642        c->Header.SGTotal = sg_used;
1643        c->Header.LUN = ioc->LUN_info;
1644        c->Header.Tag.lower = c->busaddr;
1645
1646        c->Request = ioc->Request;
1647        for (i = 0; i < sg_used; i++) {
1648                temp64.val = pci_map_single(h->pdev, buff[i], buff_size[i],
1649                                    PCI_DMA_BIDIRECTIONAL);
1650                c->SG[i].Addr.lower = temp64.val32.lower;
1651                c->SG[i].Addr.upper = temp64.val32.upper;
1652                c->SG[i].Len = buff_size[i];
1653                c->SG[i].Ext = 0;       /* we are not chaining */
1654        }
1655        c->waiting = &wait;
1656        enqueue_cmd_and_start_io(h, c);
1657        wait_for_completion(&wait);
1658        /* unlock the buffers from DMA */
1659        for (i = 0; i < sg_used; i++) {
1660                temp64.val32.lower = c->SG[i].Addr.lower;
1661                temp64.val32.upper = c->SG[i].Addr.upper;
1662                pci_unmap_single(h->pdev,
1663                        (dma_addr_t) temp64.val, buff_size[i],
1664                        PCI_DMA_BIDIRECTIONAL);
1665        }
1666        check_ioctl_unit_attention(h, c);
1667        /* Copy the error information out */
1668        ioc->error_info = *(c->err_info);
1669        if (copy_to_user(argp, ioc, sizeof(*ioc))) {
1670                cmd_special_free(h, c);
1671                status = -EFAULT;
1672                goto cleanup1;
1673        }
1674        if (ioc->Request.Type.Direction == XFER_READ) {
1675                /* Copy the data out of the buffer we created */
1676                BYTE __user *ptr = ioc->buf;
1677                for (i = 0; i < sg_used; i++) {
1678                        if (copy_to_user(ptr, buff[i], buff_size[i])) {
1679                                cmd_special_free(h, c);
1680                                status = -EFAULT;
1681                                goto cleanup1;
1682                        }
1683                        ptr += buff_size[i];
1684                }
1685        }
1686        cmd_special_free(h, c);
1687        status = 0;
1688cleanup1:
1689        if (buff) {
1690                for (i = 0; i < sg_used; i++)
1691                        kfree(buff[i]);
1692                kfree(buff);
1693        }
1694        kfree(buff_size);
1695        kfree(ioc);
1696        return status;
1697}
1698
1699static int cciss_ioctl(struct block_device *bdev, fmode_t mode,
1700        unsigned int cmd, unsigned long arg)
1701{
1702        struct gendisk *disk = bdev->bd_disk;
1703        ctlr_info_t *h = get_host(disk);
1704        void __user *argp = (void __user *)arg;
1705
1706        dev_dbg(&h->pdev->dev, "cciss_ioctl: Called with cmd=%x %lx\n",
1707                cmd, arg);
1708        switch (cmd) {
1709        case CCISS_GETPCIINFO:
1710                return cciss_getpciinfo(h, argp);
1711        case CCISS_GETINTINFO:
1712                return cciss_getintinfo(h, argp);
1713        case CCISS_SETINTINFO:
1714                return cciss_setintinfo(h, argp);
1715        case CCISS_GETNODENAME:
1716                return cciss_getnodename(h, argp);
1717        case CCISS_SETNODENAME:
1718                return cciss_setnodename(h, argp);
1719        case CCISS_GETHEARTBEAT:
1720                return cciss_getheartbeat(h, argp);
1721        case CCISS_GETBUSTYPES:
1722                return cciss_getbustypes(h, argp);
1723        case CCISS_GETFIRMVER:
1724                return cciss_getfirmver(h, argp);
1725        case CCISS_GETDRIVVER:
1726                return cciss_getdrivver(h, argp);
1727        case CCISS_DEREGDISK:
1728        case CCISS_REGNEWD:
1729        case CCISS_REVALIDVOLS:
1730                return rebuild_lun_table(h, 0, 1);
1731        case CCISS_GETLUNINFO:
1732                return cciss_getluninfo(h, disk, argp);
1733        case CCISS_PASSTHRU:
1734                return cciss_passthru(h, argp);
1735        case CCISS_BIG_PASSTHRU:
1736                return cciss_bigpassthru(h, argp);
1737
1738        /* scsi_cmd_blk_ioctl handles these, below, though some are not */
1739        /* very meaningful for cciss.  SG_IO is the main one people want. */
1740
1741        case SG_GET_VERSION_NUM:
1742        case SG_SET_TIMEOUT:
1743        case SG_GET_TIMEOUT:
1744        case SG_GET_RESERVED_SIZE:
1745        case SG_SET_RESERVED_SIZE:
1746        case SG_EMULATED_HOST:
1747        case SG_IO:
1748        case SCSI_IOCTL_SEND_COMMAND:
1749                return scsi_cmd_blk_ioctl(bdev, mode, cmd, argp);
1750
1751        /* scsi_cmd_blk_ioctl would normally handle these, below, but */
1752        /* they aren't a good fit for cciss, as CD-ROMs are */
1753        /* not supported, and we don't have any bus/target/lun */
1754        /* which we present to the kernel. */
1755
1756        case CDROM_SEND_PACKET:
1757        case CDROMCLOSETRAY:
1758        case CDROMEJECT:
1759        case SCSI_IOCTL_GET_IDLUN:
1760        case SCSI_IOCTL_GET_BUS_NUMBER:
1761        default:
1762                return -ENOTTY;
1763        }
1764}
1765
1766static void cciss_check_queues(ctlr_info_t *h)
1767{
1768        int start_queue = h->next_to_run;
1769        int i;
1770
1771        /* check to see if we have maxed out the number of commands that can
1772         * be placed on the queue.  If so then exit.  We do this check here
1773         * in case the interrupt we serviced was from an ioctl and did not
1774         * free any new commands.
1775         */
1776        if ((find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds)) == h->nr_cmds)
1777                return;
1778
1779        /* We have room on the queue for more commands.  Now we need to queue
1780         * them up.  We will also keep track of the next queue to run so
1781         * that every queue gets a chance to be started first.
1782         */
1783        for (i = 0; i < h->highest_lun + 1; i++) {
1784                int curr_queue = (start_queue + i) % (h->highest_lun + 1);
1785                /* make sure the disk has been added and the drive is real
1786                 * because this can be called from the middle of init_one.
1787                 */
1788                if (!h->drv[curr_queue])
1789                        continue;
1790                if (!(h->drv[curr_queue]->queue) ||
1791                        !(h->drv[curr_queue]->heads))
1792                        continue;
1793                blk_start_queue(h->gendisk[curr_queue]->queue);
1794
1795                /* check to see if we have maxed out the number of commands
1796                 * that can be placed on the queue.
1797                 */
1798                if ((find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds)) == h->nr_cmds) {
1799                        if (curr_queue == start_queue) {
1800                                h->next_to_run =
1801                                    (start_queue + 1) % (h->highest_lun + 1);
1802                                break;
1803                        } else {
1804                                h->next_to_run = curr_queue;
1805                                break;
1806                        }
1807                }
1808        }
1809}
1810
1811static void cciss_softirq_done(struct request *rq)
1812{
1813        CommandList_struct *c = rq->completion_data;
1814        ctlr_info_t *h = hba[c->ctlr];
1815        SGDescriptor_struct *curr_sg = c->SG;
1816        u64bit temp64;
1817        unsigned long flags;
1818        int i, ddir;
1819        int sg_index = 0;
1820
1821        if (c->Request.Type.Direction == XFER_READ)
1822                ddir = PCI_DMA_FROMDEVICE;
1823        else
1824                ddir = PCI_DMA_TODEVICE;
1825
1826        /* command did not need to be retried */
1827        /* unmap the DMA mapping for all the scatter gather elements */
1828        for (i = 0; i < c->Header.SGList; i++) {
1829                if (curr_sg[sg_index].Ext == CCISS_SG_CHAIN) {
1830                        cciss_unmap_sg_chain_block(h, c);
1831                        /* Point to the next block */
1832                        curr_sg = h->cmd_sg_list[c->cmdindex];
1833                        sg_index = 0;
1834                }
1835                temp64.val32.lower = curr_sg[sg_index].Addr.lower;
1836                temp64.val32.upper = curr_sg[sg_index].Addr.upper;
1837                pci_unmap_page(h->pdev, temp64.val, curr_sg[sg_index].Len,
1838                                ddir);
1839                ++sg_index;
1840        }
1841
1842        dev_dbg(&h->pdev->dev, "Done with %p\n", rq);
1843
1844        /* set the residual count for pc requests */
1845        if (rq->cmd_type == REQ_TYPE_BLOCK_PC)
1846                rq->resid_len = c->err_info->ResidualCnt;
1847
1848        blk_end_request_all(rq, (rq->errors == 0) ? 0 : -EIO);
1849
1850        spin_lock_irqsave(&h->lock, flags);
1851        cmd_free(h, c);
1852        cciss_check_queues(h);
1853        spin_unlock_irqrestore(&h->lock, flags);
1854}
1855
1856static inline void log_unit_to_scsi3addr(ctlr_info_t *h,
1857        unsigned char scsi3addr[], uint32_t log_unit)
1858{
1859        memcpy(scsi3addr, h->drv[log_unit]->LunID,
1860                sizeof(h->drv[log_unit]->LunID));
1861}
1862
1863/* This function gets the SCSI vendor, model, and revision of a logical drive
1864 * via the inquiry page 0.  Model, vendor, and rev are set to empty strings if
1865 * they cannot be read.
1866 */
1867static void cciss_get_device_descr(ctlr_info_t *h, int logvol,
1868                                   char *vendor, char *model, char *rev)
1869{
1870        int rc;
1871        InquiryData_struct *inq_buf;
1872        unsigned char scsi3addr[8];
1873
1874        *vendor = '\0';
1875        *model = '\0';
1876        *rev = '\0';
1877
1878        inq_buf = kzalloc(sizeof(InquiryData_struct), GFP_KERNEL);
1879        if (!inq_buf)
1880                return;
1881
1882        log_unit_to_scsi3addr(h, scsi3addr, logvol);
1883        rc = sendcmd_withirq(h, CISS_INQUIRY, inq_buf, sizeof(*inq_buf), 0,
1884                        scsi3addr, TYPE_CMD);
1885        if (rc == IO_OK) {
1886                memcpy(vendor, &inq_buf->data_byte[8], VENDOR_LEN);
1887                vendor[VENDOR_LEN] = '\0';
1888                memcpy(model, &inq_buf->data_byte[16], MODEL_LEN);
1889                model[MODEL_LEN] = '\0';
1890                memcpy(rev, &inq_buf->data_byte[32], REV_LEN);
1891                rev[REV_LEN] = '\0';
1892        }
1893
1894        kfree(inq_buf);
1895        return;
1896}
1897
1898/* This function gets the serial number of a logical drive via
1899 * inquiry page 0x83.  Serial no. is 16 bytes.  If the serial
1900 * number cannot be had, for whatever reason, 16 bytes of 0xff
1901 * are returned instead.
1902 */
1903static void cciss_get_serial_no(ctlr_info_t *h, int logvol,
1904                                unsigned char *serial_no, int buflen)
1905{
1906#define PAGE_83_INQ_BYTES 64
1907        int rc;
1908        unsigned char *buf;
1909        unsigned char scsi3addr[8];
1910
1911        if (buflen > 16)
1912                buflen = 16;
1913        memset(serial_no, 0xff, buflen);
1914        buf = kzalloc(PAGE_83_INQ_BYTES, GFP_KERNEL);
1915        if (!buf)
1916                return;
1917        memset(serial_no, 0, buflen);
1918        log_unit_to_scsi3addr(h, scsi3addr, logvol);
1919        rc = sendcmd_withirq(h, CISS_INQUIRY, buf,
1920                PAGE_83_INQ_BYTES, 0x83, scsi3addr, TYPE_CMD);
1921        if (rc == IO_OK)
1922                memcpy(serial_no, &buf[8], buflen);
1923        kfree(buf);
1924        return;
1925}
1926
1927/*
1928 * cciss_add_disk sets up the block device queue for a logical drive
1929 */
1930static int cciss_add_disk(ctlr_info_t *h, struct gendisk *disk,
1931                                int drv_index)
1932{
1933        disk->queue = blk_init_queue(do_cciss_request, &h->lock);
1934        if (!disk->queue)
1935                goto init_queue_failure;
1936        sprintf(disk->disk_name, "cciss/c%dd%d", h->ctlr, drv_index);
1937        disk->major = h->major;
1938        disk->first_minor = drv_index << NWD_SHIFT;
1939        disk->fops = &cciss_fops;
1940        if (cciss_create_ld_sysfs_entry(h, drv_index))
1941                goto cleanup_queue;
1942        disk->private_data = h->drv[drv_index];
1943        disk->driverfs_dev = &h->drv[drv_index]->dev;
1944
1945        /* Set up queue information */
1946        blk_queue_bounce_limit(disk->queue, h->pdev->dma_mask);
1947
1948        /* This is a hardware imposed limit. */
1949        blk_queue_max_segments(disk->queue, h->maxsgentries);
1950
1951        blk_queue_max_hw_sectors(disk->queue, h->cciss_max_sectors);
1952
1953        blk_queue_softirq_done(disk->queue, cciss_softirq_done);
1954
1955        disk->queue->queuedata = h;
1956
1957        blk_queue_logical_block_size(disk->queue,
1958                                     h->drv[drv_index]->block_size);
1959
1960        /* Make sure all queue data is written out before */
1961        /* setting h->drv[drv_index]->queue, as setting this */
1962        /* allows the interrupt handler to start the queue */
1963        wmb();
1964        h->drv[drv_index]->queue = disk->queue;
1965        add_disk(disk);
1966        return 0;
1967
1968cleanup_queue:
1969        blk_cleanup_queue(disk->queue);
1970        disk->queue = NULL;
1971init_queue_failure:
1972        return -1;
1973}
1974
1975/* This function will check the usage_count of the drive to be updated/added.
1976 * If the usage_count is zero and it is a heretofore unknown drive, or,
1977 * the drive's capacity, geometry, or serial number has changed,
1978 * then the drive information will be updated and the disk will be
1979 * re-registered with the kernel.  If these conditions don't hold,
1980 * then it will be left alone for the next reboot.  The exception to this
1981 * is disk 0 which will always be left registered with the kernel since it
1982 * is also the controller node.  Any changes to disk 0 will show up on
1983 * the next reboot.
1984 */
1985static void cciss_update_drive_info(ctlr_info_t *h, int drv_index,
1986        int first_time, int via_ioctl)
1987{
1988        struct gendisk *disk;
1989        InquiryData_struct *inq_buff = NULL;
1990        unsigned int block_size;
1991        sector_t total_size;
1992        unsigned long flags = 0;
1993        int ret = 0;
1994        drive_info_struct *drvinfo;
1995
1996        /* Get information about the disk and modify the driver structure */
1997        inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
1998        drvinfo = kzalloc(sizeof(*drvinfo), GFP_KERNEL);
1999        if (inq_buff == NULL || drvinfo == NULL)
2000                goto mem_msg;
2001
2002        /* testing to see if 16-byte CDBs are already being used */
2003        if (h->cciss_read == CCISS_READ_16) {
2004                cciss_read_capacity_16(h, drv_index,
2005                        &total_size, &block_size);
2006
2007        } else {
2008                cciss_read_capacity(h, drv_index, &total_size, &block_size);
2009                /* if read_capacity returns all F's this volume is >2TB */
2010                /* in size so we switch to 16-byte CDB's for all */
2011                /* read/write ops */
2012                if (total_size == 0xFFFFFFFFULL) {
2013                        cciss_read_capacity_16(h, drv_index,
2014                        &total_size, &block_size);
2015                        h->cciss_read = CCISS_READ_16;
2016                        h->cciss_write = CCISS_WRITE_16;
2017                } else {
2018                        h->cciss_read = CCISS_READ_10;
2019                        h->cciss_write = CCISS_WRITE_10;
2020                }
2021        }
2022
2023        cciss_geometry_inquiry(h, drv_index, total_size, block_size,
2024                               inq_buff, drvinfo);
2025        drvinfo->block_size = block_size;
2026        drvinfo->nr_blocks = total_size + 1;
2027
2028        cciss_get_device_descr(h, drv_index, drvinfo->vendor,
2029                                drvinfo->model, drvinfo->rev);
2030        cciss_get_serial_no(h, drv_index, drvinfo->serial_no,
2031                        sizeof(drvinfo->serial_no));
2032        /* Save the lunid in case we deregister the disk, below. */
2033        memcpy(drvinfo->LunID, h->drv[drv_index]->LunID,
2034                sizeof(drvinfo->LunID));
2035
2036        /* Is it the same disk we already know, and nothing's changed? */
2037        if (h->drv[drv_index]->raid_level != -1 &&
2038                ((memcmp(drvinfo->serial_no,
2039                                h->drv[drv_index]->serial_no, 16) == 0) &&
2040                drvinfo->block_size == h->drv[drv_index]->block_size &&
2041                drvinfo->nr_blocks == h->drv[drv_index]->nr_blocks &&
2042                drvinfo->heads == h->drv[drv_index]->heads &&
2043                drvinfo->sectors == h->drv[drv_index]->sectors &&
2044                drvinfo->cylinders == h->drv[drv_index]->cylinders))
2045                        /* The disk is unchanged, nothing to update */
2046                        goto freeret;
2047
2048        /* If we get here it's not the same disk, or something's changed,
2049         * so we need to * deregister it, and re-register it, if it's not
2050         * in use.
2051         * If the disk already exists then deregister it before proceeding
2052         * (unless it's the first disk (for the controller node).
2053         */
2054        if (h->drv[drv_index]->raid_level != -1 && drv_index != 0) {
2055                dev_warn(&h->pdev->dev, "disk %d has changed.\n", drv_index);
2056                spin_lock_irqsave(&h->lock, flags);
2057                h->drv[drv_index]->busy_configuring = 1;
2058                spin_unlock_irqrestore(&h->lock, flags);
2059
2060                /* deregister_disk sets h->drv[drv_index]->queue = NULL
2061                 * which keeps the interrupt handler from starting
2062                 * the queue.
2063                 */
2064                ret = deregister_disk(h, drv_index, 0, via_ioctl);
2065        }
2066
2067        /* If the disk is in use return */
2068        if (ret)
2069                goto freeret;
2070
2071        /* Save the new information from cciss_geometry_inquiry
2072         * and serial number inquiry.  If the disk was deregistered
2073         * above, then h->drv[drv_index] will be NULL.
2074         */
2075        if (h->drv[drv_index] == NULL) {
2076                drvinfo->device_initialized = 0;
2077                h->drv[drv_index] = drvinfo;
2078                drvinfo = NULL; /* so it won't be freed below. */
2079        } else {
2080                /* special case for cxd0 */
2081                h->drv[drv_index]->block_size = drvinfo->block_size;
2082                h->drv[drv_index]->nr_blocks = drvinfo->nr_blocks;
2083                h->drv[drv_index]->heads = drvinfo->heads;
2084                h->drv[drv_index]->sectors = drvinfo->sectors;
2085                h->drv[drv_index]->cylinders = drvinfo->cylinders;
2086                h->drv[drv_index]->raid_level = drvinfo->raid_level;
2087                memcpy(h->drv[drv_index]->serial_no, drvinfo->serial_no, 16);
2088                memcpy(h->drv[drv_index]->vendor, drvinfo->vendor,
2089                        VENDOR_LEN + 1);
2090                memcpy(h->drv[drv_index]->model, drvinfo->model, MODEL_LEN + 1);
2091                memcpy(h->drv[drv_index]->rev, drvinfo->rev, REV_LEN + 1);
2092        }
2093
2094        ++h->num_luns;
2095        disk = h->gendisk[drv_index];
2096        set_capacity(disk, h->drv[drv_index]->nr_blocks);
2097
2098        /* If it's not disk 0 (drv_index != 0)
2099         * or if it was disk 0, but there was previously
2100         * no actual corresponding configured logical drive
2101         * (raid_leve == -1) then we want to update the
2102         * logical drive's information.
2103         */
2104        if (drv_index || first_time) {
2105                if (cciss_add_disk(h, disk, drv_index) != 0) {
2106                        cciss_free_gendisk(h, drv_index);
2107                        cciss_free_drive_info(h, drv_index);
2108                        dev_warn(&h->pdev->dev, "could not update disk %d\n",
2109                                drv_index);
2110                        --h->num_luns;
2111                }
2112        }
2113
2114freeret:
2115        kfree(inq_buff);
2116        kfree(drvinfo);
2117        return;
2118mem_msg:
2119        dev_err(&h->pdev->dev, "out of memory\n");
2120        goto freeret;
2121}
2122
2123/* This function will find the first index of the controllers drive array
2124 * that has a null drv pointer and allocate the drive info struct and
2125 * will return that index   This is where new drives will be added.
2126 * If the index to be returned is greater than the highest_lun index for
2127 * the controller then highest_lun is set * to this new index.
2128 * If there are no available indexes or if tha allocation fails, then -1
2129 * is returned.  * "controller_node" is used to know if this is a real
2130 * logical drive, or just the controller node, which determines if this
2131 * counts towards highest_lun.
2132 */
2133static int cciss_alloc_drive_info(ctlr_info_t *h, int controller_node)
2134{
2135        int i;
2136        drive_info_struct *drv;
2137
2138        /* Search for an empty slot for our drive info */
2139        for (i = 0; i < CISS_MAX_LUN; i++) {
2140
2141                /* if not cxd0 case, and it's occupied, skip it. */
2142                if (h->drv[i] && i != 0)
2143                        continue;
2144                /*
2145                 * If it's cxd0 case, and drv is alloc'ed already, and a
2146                 * disk is configured there, skip it.
2147                 */
2148                if (i == 0 && h->drv[i] && h->drv[i]->raid_level != -1)
2149                        continue;
2150
2151                /*
2152                 * We've found an empty slot.  Update highest_lun
2153                 * provided this isn't just the fake cxd0 controller node.
2154                 */
2155                if (i > h->highest_lun && !controller_node)
2156                        h->highest_lun = i;
2157
2158                /* If adding a real disk at cxd0, and it's already alloc'ed */
2159                if (i == 0 && h->drv[i] != NULL)
2160                        return i;
2161
2162                /*
2163                 * Found an empty slot, not already alloc'ed.  Allocate it.
2164                 * Mark it with raid_level == -1, so we know it's new later on.
2165                 */
2166                drv = kzalloc(sizeof(*drv), GFP_KERNEL);
2167                if (!drv)
2168                        return -1;
2169                drv->raid_level = -1; /* so we know it's new */
2170                h->drv[i] = drv;
2171                return i;
2172        }
2173        return -1;
2174}
2175
2176static void cciss_free_drive_info(ctlr_info_t *h, int drv_index)
2177{
2178        kfree(h->drv[drv_index]);
2179        h->drv[drv_index] = NULL;
2180}
2181
2182static void cciss_free_gendisk(ctlr_info_t *h, int drv_index)
2183{
2184        put_disk(h->gendisk[drv_index]);
2185        h->gendisk[drv_index] = NULL;
2186}
2187
2188/* cciss_add_gendisk finds a free hba[]->drv structure
2189 * and allocates a gendisk if needed, and sets the lunid
2190 * in the drvinfo structure.   It returns the index into
2191 * the ->drv[] array, or -1 if none are free.
2192 * is_controller_node indicates whether highest_lun should
2193 * count this disk, or if it's only being added to provide
2194 * a means to talk to the controller in case no logical
2195 * drives have yet been configured.
2196 */
2197static int cciss_add_gendisk(ctlr_info_t *h, unsigned char lunid[],
2198        int controller_node)
2199{
2200        int drv_index;
2201
2202        drv_index = cciss_alloc_drive_info(h, controller_node);
2203        if (drv_index == -1)
2204                return -1;
2205
2206        /*Check if the gendisk needs to be allocated */
2207        if (!h->gendisk[drv_index]) {
2208                h->gendisk[drv_index] =
2209                        alloc_disk(1 << NWD_SHIFT);
2210                if (!h->gendisk[drv_index]) {
2211                        dev_err(&h->pdev->dev,
2212                                "could not allocate a new disk %d\n",
2213                                drv_index);
2214                        goto err_free_drive_info;
2215                }
2216        }
2217        memcpy(h->drv[drv_index]->LunID, lunid,
2218                sizeof(h->drv[drv_index]->LunID));
2219        if (cciss_create_ld_sysfs_entry(h, drv_index))
2220                goto err_free_disk;
2221        /* Don't need to mark this busy because nobody */
2222        /* else knows about this disk yet to contend */
2223        /* for access to it. */
2224        h->drv[drv_index]->busy_configuring = 0;
2225        wmb();
2226        return drv_index;
2227
2228err_free_disk:
2229        cciss_free_gendisk(h, drv_index);
2230err_free_drive_info:
2231        cciss_free_drive_info(h, drv_index);
2232        return -1;
2233}
2234
2235/* This is for the special case of a controller which
2236 * has no logical drives.  In this case, we still need
2237 * to register a disk so the controller can be accessed
2238 * by the Array Config Utility.
2239 */
2240static void cciss_add_controller_node(ctlr_info_t *h)
2241{
2242        struct gendisk *disk;
2243        int drv_index;
2244
2245        if (h->gendisk[0] != NULL) /* already did this? Then bail. */
2246                return;
2247
2248        drv_index = cciss_add_gendisk(h, CTLR_LUNID, 1);
2249        if (drv_index == -1)
2250                goto error;
2251        h->drv[drv_index]->block_size = 512;
2252        h->drv[drv_index]->nr_blocks = 0;
2253        h->drv[drv_index]->heads = 0;
2254        h->drv[drv_index]->sectors = 0;
2255        h->drv[drv_index]->cylinders = 0;
2256        h->drv[drv_index]->raid_level = -1;
2257        memset(h->drv[drv_index]->serial_no, 0, 16);
2258        disk = h->gendisk[drv_index];
2259        if (cciss_add_disk(h, disk, drv_index) == 0)
2260                return;
2261        cciss_free_gendisk(h, drv_index);
2262        cciss_free_drive_info(h, drv_index);
2263error:
2264        dev_warn(&h->pdev->dev, "could not add disk 0.\n");
2265        return;
2266}
2267
2268/* This function will add and remove logical drives from the Logical
2269 * drive array of the controller and maintain persistency of ordering
2270 * so that mount points are preserved until the next reboot.  This allows
2271 * for the removal of logical drives in the middle of the drive array
2272 * without a re-ordering of those drives.
2273 * INPUT
2274 * h            = The controller to perform the operations on
2275 */
2276static int rebuild_lun_table(ctlr_info_t *h, int first_time,
2277        int via_ioctl)
2278{
2279        int num_luns;
2280        ReportLunData_struct *ld_buff = NULL;
2281        int return_code;
2282        int listlength = 0;
2283        int i;
2284        int drv_found;
2285        int drv_index = 0;
2286        unsigned char lunid[8] = CTLR_LUNID;
2287        unsigned long flags;
2288
2289        if (!capable(CAP_SYS_RAWIO))
2290                return -EPERM;
2291
2292        /* Set busy_configuring flag for this operation */
2293        spin_lock_irqsave(&h->lock, flags);
2294        if (h->busy_configuring) {
2295                spin_unlock_irqrestore(&h->lock, flags);
2296                return -EBUSY;
2297        }
2298        h->busy_configuring = 1;
2299        spin_unlock_irqrestore(&h->lock, flags);
2300
2301        ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
2302        if (ld_buff == NULL)
2303                goto mem_msg;
2304
2305        return_code = sendcmd_withirq(h, CISS_REPORT_LOG, ld_buff,
2306                                      sizeof(ReportLunData_struct),
2307                                      0, CTLR_LUNID, TYPE_CMD);
2308
2309        if (return_code == IO_OK)
2310                listlength = be32_to_cpu(*(__be32 *) ld_buff->LUNListLength);
2311        else {  /* reading number of logical volumes failed */
2312                dev_warn(&h->pdev->dev,
2313                        "report logical volume command failed\n");
2314                listlength = 0;
2315                goto freeret;
2316        }
2317
2318        num_luns = listlength / 8;      /* 8 bytes per entry */
2319        if (num_luns > CISS_MAX_LUN) {
2320                num_luns = CISS_MAX_LUN;
2321                dev_warn(&h->pdev->dev, "more luns configured"
2322                       " on controller than can be handled by"
2323                       " this driver.\n");
2324        }
2325
2326        if (num_luns == 0)
2327                cciss_add_controller_node(h);
2328
2329        /* Compare controller drive array to driver's drive array
2330         * to see if any drives are missing on the controller due
2331         * to action of Array Config Utility (user deletes drive)
2332         * and deregister logical drives which have disappeared.
2333         */
2334        for (i = 0; i <= h->highest_lun; i++) {
2335                int j;
2336                drv_found = 0;
2337
2338                /* skip holes in the array from already deleted drives */
2339                if (h->drv[i] == NULL)
2340                        continue;
2341
2342                for (j = 0; j < num_luns; j++) {
2343                        memcpy(lunid, &ld_buff->LUN[j][0], sizeof(lunid));
2344                        if (memcmp(h->drv[i]->LunID, lunid,
2345                                sizeof(lunid)) == 0) {
2346                                drv_found = 1;
2347                                break;
2348                        }
2349                }
2350                if (!drv_found) {
2351                        /* Deregister it from the OS, it's gone. */
2352                        spin_lock_irqsave(&h->lock, flags);
2353                        h->drv[i]->busy_configuring = 1;
2354                        spin_unlock_irqrestore(&h->lock, flags);
2355                        return_code = deregister_disk(h, i, 1, via_ioctl);
2356                        if (h->drv[i] != NULL)
2357                                h->drv[i]->busy_configuring = 0;
2358                }
2359        }
2360
2361        /* Compare controller drive array to driver's drive array.
2362         * Check for updates in the drive information and any new drives
2363         * on the controller due to ACU adding logical drives, or changing
2364         * a logical drive's size, etc.  Reregister any new/changed drives
2365         */
2366        for (i = 0; i < num_luns; i++) {
2367                int j;
2368
2369                drv_found = 0;
2370
2371                memcpy(lunid, &ld_buff->LUN[i][0], sizeof(lunid));
2372                /* Find if the LUN is already in the drive array
2373                 * of the driver.  If so then update its info
2374                 * if not in use.  If it does not exist then find
2375                 * the first free index and add it.
2376                 */
2377                for (j = 0; j <= h->highest_lun; j++) {
2378                        if (h->drv[j] != NULL &&
2379                                memcmp(h->drv[j]->LunID, lunid,
2380                                        sizeof(h->drv[j]->LunID)) == 0) {
2381                                drv_index = j;
2382                                drv_found = 1;
2383                                break;
2384                        }
2385                }
2386
2387                /* check if the drive was found already in the array */
2388                if (!drv_found) {
2389                        drv_index = cciss_add_gendisk(h, lunid, 0);
2390                        if (drv_index == -1)
2391                                goto freeret;
2392                }
2393                cciss_update_drive_info(h, drv_index, first_time, via_ioctl);
2394        }               /* end for */
2395
2396freeret:
2397        kfree(ld_buff);
2398        h->busy_configuring = 0;
2399        /* We return -1 here to tell the ACU that we have registered/updated
2400         * all of the drives that we can and to keep it from calling us
2401         * additional times.
2402         */
2403        return -1;
2404mem_msg:
2405        dev_err(&h->pdev->dev, "out of memory\n");
2406        h->busy_configuring = 0;
2407        goto freeret;
2408}
2409
2410static void cciss_clear_drive_info(drive_info_struct *drive_info)
2411{
2412        /* zero out the disk size info */
2413        drive_info->nr_blocks = 0;
2414        drive_info->block_size = 0;
2415        drive_info->heads = 0;
2416        drive_info->sectors = 0;
2417        drive_info->cylinders = 0;
2418        drive_info->raid_level = -1;
2419        memset(drive_info->serial_no, 0, sizeof(drive_info->serial_no));
2420        memset(drive_info->model, 0, sizeof(drive_info->model));
2421        memset(drive_info->rev, 0, sizeof(drive_info->rev));
2422        memset(drive_info->vendor, 0, sizeof(drive_info->vendor));
2423        /*
2424         * don't clear the LUNID though, we need to remember which
2425         * one this one is.
2426         */
2427}
2428
2429/* This function will deregister the disk and it's queue from the
2430 * kernel.  It must be called with the controller lock held and the
2431 * drv structures busy_configuring flag set.  It's parameters are:
2432 *
2433 * disk = This is the disk to be deregistered
2434 * drv  = This is the drive_info_struct associated with the disk to be
2435 *        deregistered.  It contains information about the disk used
2436 *        by the driver.
2437 * clear_all = This flag determines whether or not the disk information
2438 *             is going to be completely cleared out and the highest_lun
2439 *             reset.  Sometimes we want to clear out information about
2440 *             the disk in preparation for re-adding it.  In this case
2441 *             the highest_lun should be left unchanged and the LunID
2442 *             should not be cleared.
2443 * via_ioctl
2444 *    This indicates whether we've reached this path via ioctl.
2445 *    This affects the maximum usage count allowed for c0d0 to be messed with.
2446 *    If this path is reached via ioctl(), then the max_usage_count will
2447 *    be 1, as the process calling ioctl() has got to have the device open.
2448 *    If we get here via sysfs, then the max usage count will be zero.
2449*/
2450static int deregister_disk(ctlr_info_t *h, int drv_index,
2451                           int clear_all, int via_ioctl)
2452{
2453        int i;
2454        struct gendisk *disk;
2455        drive_info_struct *drv;
2456        int recalculate_highest_lun;
2457
2458        if (!capable(CAP_SYS_RAWIO))
2459                return -EPERM;
2460
2461        drv = h->drv[drv_index];
2462        disk = h->gendisk[drv_index];
2463
2464        /* make sure logical volume is NOT is use */
2465        if (clear_all || (h->gendisk[0] == disk)) {
2466                if (drv->usage_count > via_ioctl)
2467                        return -EBUSY;
2468        } else if (drv->usage_count > 0)
2469                return -EBUSY;
2470
2471        recalculate_highest_lun = (drv == h->drv[h->highest_lun]);
2472
2473        /* invalidate the devices and deregister the disk.  If it is disk
2474         * zero do not deregister it but just zero out it's values.  This
2475         * allows us to delete disk zero but keep the controller registered.
2476         */
2477        if (h->gendisk[0] != disk) {
2478                struct request_queue *q = disk->queue;
2479                if (disk->flags & GENHD_FL_UP) {
2480                        cciss_destroy_ld_sysfs_entry(h, drv_index, 0);
2481                        del_gendisk(disk);
2482                }
2483                if (q)
2484                        blk_cleanup_queue(q);
2485                /* If clear_all is set then we are deleting the logical
2486                 * drive, not just refreshing its info.  For drives
2487                 * other than disk 0 we will call put_disk.  We do not
2488                 * do this for disk 0 as we need it to be able to
2489                 * configure the controller.
2490                 */
2491                if (clear_all){
2492                        /* This isn't pretty, but we need to find the
2493                         * disk in our array and NULL our the pointer.
2494                         * This is so that we will call alloc_disk if
2495                         * this index is used again later.
2496                         */
2497                        for (i=0; i < CISS_MAX_LUN; i++){
2498                                if (h->gendisk[i] == disk) {
2499                                        h->gendisk[i] = NULL;
2500                                        break;
2501                                }
2502                        }
2503                        put_disk(disk);
2504                }
2505        } else {
2506                set_capacity(disk, 0);
2507                cciss_clear_drive_info(drv);
2508        }
2509
2510        --h->num_luns;
2511
2512        /* if it was the last disk, find the new hightest lun */
2513        if (clear_all && recalculate_highest_lun) {
2514                int newhighest = -1;
2515                for (i = 0; i <= h->highest_lun; i++) {
2516                        /* if the disk has size > 0, it is available */
2517                        if (h->drv[i] && h->drv[i]->heads)
2518                                newhighest = i;
2519                }
2520                h->highest_lun = newhighest;
2521        }
2522        return 0;
2523}
2524
2525static int fill_cmd(ctlr_info_t *h, CommandList_struct *c, __u8 cmd, void *buff,
2526                size_t size, __u8 page_code, unsigned char *scsi3addr,
2527                int cmd_type)
2528{
2529        u64bit buff_dma_handle;
2530        int status = IO_OK;
2531
2532        c->cmd_type = CMD_IOCTL_PEND;
2533        c->Header.ReplyQueue = 0;
2534        if (buff != NULL) {
2535                c->Header.SGList = 1;
2536                c->Header.SGTotal = 1;
2537        } else {
2538                c->Header.SGList = 0;
2539                c->Header.SGTotal = 0;
2540        }
2541        c->Header.Tag.lower = c->busaddr;
2542        memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, 8);
2543
2544        c->Request.Type.Type = cmd_type;
2545        if (cmd_type == TYPE_CMD) {
2546                switch (cmd) {
2547                case CISS_INQUIRY:
2548                        /* are we trying to read a vital product page */
2549                        if (page_code != 0) {
2550                                c->Request.CDB[1] = 0x01;
2551                                c->Request.CDB[2] = page_code;
2552                        }
2553                        c->Request.CDBLen = 6;
2554                        c->Request.Type.Attribute = ATTR_SIMPLE;
2555                        c->Request.Type.Direction = XFER_READ;
2556                        c->Request.Timeout = 0;
2557                        c->Request.CDB[0] = CISS_INQUIRY;
2558                        c->Request.CDB[4] = size & 0xFF;
2559                        break;
2560                case CISS_REPORT_LOG:
2561                case CISS_REPORT_PHYS:
2562                        /* Talking to controller so It's a physical command
2563                           mode = 00 target = 0.  Nothing to write.
2564                         */
2565                        c->Request.CDBLen = 12;
2566                        c->Request.Type.Attribute = ATTR_SIMPLE;
2567                        c->Request.Type.Direction = XFER_READ;
2568                        c->Request.Timeout = 0;
2569                        c->Request.CDB[0] = cmd;
2570                        c->Request.CDB[6] = (size >> 24) & 0xFF; /* MSB */
2571                        c->Request.CDB[7] = (size >> 16) & 0xFF;
2572                        c->Request.CDB[8] = (size >> 8) & 0xFF;
2573                        c->Request.CDB[9] = size & 0xFF;
2574                        break;
2575
2576                case CCISS_READ_CAPACITY:
2577                        c->Request.CDBLen = 10;
2578                        c->Request.Type.Attribute = ATTR_SIMPLE;
2579                        c->Request.Type.Direction = XFER_READ;
2580                        c->Request.Timeout = 0;
2581                        c->Request.CDB[0] = cmd;
2582                        break;
2583                case CCISS_READ_CAPACITY_16:
2584                        c->Request.CDBLen = 16;
2585                        c->Request.Type.Attribute = ATTR_SIMPLE;
2586                        c->Request.Type.Direction = XFER_READ;
2587                        c->Request.Timeout = 0;
2588                        c->Request.CDB[0] = cmd;
2589                        c->Request.CDB[1] = 0x10;
2590                        c->Request.CDB[10] = (size >> 24) & 0xFF;
2591                        c->Request.CDB[11] = (size >> 16) & 0xFF;
2592                        c->Request.CDB[12] = (size >> 8) & 0xFF;
2593                        c->Request.CDB[13] = size & 0xFF;
2594                        c->Request.Timeout = 0;
2595                        c->Request.CDB[0] = cmd;
2596                        break;
2597                case CCISS_CACHE_FLUSH:
2598                        c->Request.CDBLen = 12;
2599                        c->Request.Type.Attribute = ATTR_SIMPLE;
2600                        c->Request.Type.Direction = XFER_WRITE;
2601                        c->Request.Timeout = 0;
2602                        c->Request.CDB[0] = BMIC_WRITE;
2603                        c->Request.CDB[6] = BMIC_CACHE_FLUSH;
2604                        c->Request.CDB[7] = (size >> 8) & 0xFF;
2605                        c->Request.CDB[8] = size & 0xFF;
2606                        break;
2607                case TEST_UNIT_READY:
2608                        c->Request.CDBLen = 6;
2609                        c->Request.Type.Attribute = ATTR_SIMPLE;
2610                        c->Request.Type.Direction = XFER_NONE;
2611                        c->Request.Timeout = 0;
2612                        break;
2613                default:
2614                        dev_warn(&h->pdev->dev, "Unknown Command 0x%c\n", cmd);
2615                        return IO_ERROR;
2616                }
2617        } else if (cmd_type == TYPE_MSG) {
2618                switch (cmd) {
2619                case CCISS_ABORT_MSG:
2620                        c->Request.CDBLen = 12;
2621                        c->Request.Type.Attribute = ATTR_SIMPLE;
2622                        c->Request.Type.Direction = XFER_WRITE;
2623                        c->Request.Timeout = 0;
2624                        c->Request.CDB[0] = cmd;        /* abort */
2625                        c->Request.CDB[1] = 0;  /* abort a command */
2626                        /* buff contains the tag of the command to abort */
2627                        memcpy(&c->Request.CDB[4], buff, 8);
2628                        break;
2629                case CCISS_RESET_MSG:
2630                        c->Request.CDBLen = 16;
2631                        c->Request.Type.Attribute = ATTR_SIMPLE;
2632                        c->Request.Type.Direction = XFER_NONE;
2633                        c->Request.Timeout = 0;
2634                        memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB));
2635                        c->Request.CDB[0] = cmd;        /* reset */
2636                        c->Request.CDB[1] = CCISS_RESET_TYPE_TARGET;
2637                        break;
2638                case CCISS_NOOP_MSG:
2639                        c->Request.CDBLen = 1;
2640                        c->Request.Type.Attribute = ATTR_SIMPLE;
2641                        c->Request.Type.Direction = XFER_WRITE;
2642                        c->Request.Timeout = 0;
2643                        c->Request.CDB[0] = cmd;
2644                        break;
2645                default:
2646                        dev_warn(&h->pdev->dev,
2647                                "unknown message type %d\n", cmd);
2648                        return IO_ERROR;
2649                }
2650        } else {
2651                dev_warn(&h->pdev->dev, "unknown command type %d\n", cmd_type);
2652                return IO_ERROR;
2653        }
2654        /* Fill in the scatter gather information */
2655        if (size > 0) {
2656                buff_dma_handle.val = (__u64) pci_map_single(h->pdev,
2657                                                             buff, size,
2658                                                             PCI_DMA_BIDIRECTIONAL);
2659                c->SG[0].Addr.lower = buff_dma_handle.val32.lower;
2660                c->SG[0].Addr.upper = buff_dma_handle.val32.upper;
2661                c->SG[0].Len = size;
2662                c->SG[0].Ext = 0;       /* we are not chaining */
2663        }
2664        return status;
2665}
2666
2667static int __devinit cciss_send_reset(ctlr_info_t *h, unsigned char *scsi3addr,
2668        u8 reset_type)
2669{
2670        CommandList_struct *c;
2671        int return_status;
2672
2673        c = cmd_alloc(h);
2674        if (!c)
2675                return -ENOMEM;
2676        return_status = fill_cmd(h, c, CCISS_RESET_MSG, NULL, 0, 0,
2677                CTLR_LUNID, TYPE_MSG);
2678        c->Request.CDB[1] = reset_type; /* fill_cmd defaults to target reset */
2679        if (return_status != IO_OK) {
2680                cmd_special_free(h, c);
2681                return return_status;
2682        }
2683        c->waiting = NULL;
2684        enqueue_cmd_and_start_io(h, c);
2685        /* Don't wait for completion, the reset won't complete.  Don't free
2686         * the command either.  This is the last command we will send before
2687         * re-initializing everything, so it doesn't matter and won't leak.
2688         */
2689        return 0;
2690}
2691
2692static int check_target_status(ctlr_info_t *h, CommandList_struct *c)
2693{
2694        switch (c->err_info->ScsiStatus) {
2695        case SAM_STAT_GOOD:
2696                return IO_OK;
2697        case SAM_STAT_CHECK_CONDITION:
2698                switch (0xf & c->err_info->SenseInfo[2]) {
2699                case 0: return IO_OK; /* no sense */
2700                case 1: return IO_OK; /* recovered error */
2701                default:
2702                        if (check_for_unit_attention(h, c))
2703                                return IO_NEEDS_RETRY;
2704                        dev_warn(&h->pdev->dev, "cmd 0x%02x "
2705                                "check condition, sense key = 0x%02x\n",
2706                                c->Request.CDB[0], c->err_info->SenseInfo[2]);
2707                }
2708                break;
2709        default:
2710                dev_warn(&h->pdev->dev, "cmd 0x%02x"
2711                        "scsi status = 0x%02x\n",
2712                        c->Request.CDB[0], c->err_info->ScsiStatus);
2713                break;
2714        }
2715        return IO_ERROR;
2716}
2717
2718static int process_sendcmd_error(ctlr_info_t *h, CommandList_struct *c)
2719{
2720        int return_status = IO_OK;
2721
2722        if (c->err_info->CommandStatus == CMD_SUCCESS)
2723                return IO_OK;
2724
2725        switch (c->err_info->CommandStatus) {
2726        case CMD_TARGET_STATUS:
2727                return_status = check_target_status(h, c);
2728                break;
2729        case CMD_DATA_UNDERRUN:
2730        case CMD_DATA_OVERRUN:
2731                /* expected for inquiry and report lun commands */
2732                break;
2733        case CMD_INVALID:
2734                dev_warn(&h->pdev->dev, "cmd 0x%02x is "
2735                       "reported invalid\n", c->Request.CDB[0]);
2736                return_status = IO_ERROR;
2737                break;
2738        case CMD_PROTOCOL_ERR:
2739                dev_warn(&h->pdev->dev, "cmd 0x%02x has "
2740                       "protocol error\n", c->Request.CDB[0]);
2741                return_status = IO_ERROR;
2742                break;
2743        case CMD_HARDWARE_ERR:
2744                dev_warn(&h->pdev->dev, "cmd 0x%02x had "
2745                       " hardware error\n", c->Request.CDB[0]);
2746                return_status = IO_ERROR;
2747                break;
2748        case CMD_CONNECTION_LOST:
2749                dev_warn(&h->pdev->dev, "cmd 0x%02x had "
2750                       "connection lost\n", c->Request.CDB[0]);
2751                return_status = IO_ERROR;
2752                break;
2753        case CMD_ABORTED:
2754                dev_warn(&h->pdev->dev, "cmd 0x%02x was "
2755                       "aborted\n", c->Request.CDB[0]);
2756                return_status = IO_ERROR;
2757                break;
2758        case CMD_ABORT_FAILED:
2759                dev_warn(&h->pdev->dev, "cmd 0x%02x reports "
2760                       "abort failed\n", c->Request.CDB[0]);
2761                return_status = IO_ERROR;
2762                break;
2763        case CMD_UNSOLICITED_ABORT:
2764                dev_warn(&h->pdev->dev, "unsolicited abort 0x%02x\n",
2765                        c->Request.CDB[0]);
2766                return_status = IO_NEEDS_RETRY;
2767                break;
2768        case CMD_UNABORTABLE:
2769                dev_warn(&h->pdev->dev, "cmd unabortable\n");
2770                return_status = IO_ERROR;
2771                break;
2772        default:
2773                dev_warn(&h->pdev->dev, "cmd 0x%02x returned "
2774                       "unknown status %x\n", c->Request.CDB[0],
2775                       c->err_info->CommandStatus);
2776                return_status = IO_ERROR;
2777        }
2778        return return_status;
2779}
2780
2781static int sendcmd_withirq_core(ctlr_info_t *h, CommandList_struct *c,
2782        int attempt_retry)
2783{
2784        DECLARE_COMPLETION_ONSTACK(wait);
2785        u64bit buff_dma_handle;
2786        int return_status = IO_OK;
2787
2788resend_cmd2:
2789        c->waiting = &wait;
2790        enqueue_cmd_and_start_io(h, c);
2791
2792        wait_for_completion(&wait);
2793
2794        if (c->err_info->CommandStatus == 0 || !attempt_retry)
2795                goto command_done;
2796
2797        return_status = process_sendcmd_error(h, c);
2798
2799        if (return_status == IO_NEEDS_RETRY &&
2800                c->retry_count < MAX_CMD_RETRIES) {
2801                dev_warn(&h->pdev->dev, "retrying 0x%02x\n",
2802                        c->Request.CDB[0]);
2803                c->retry_count++;
2804                /* erase the old error information */
2805                memset(c->err_info, 0, sizeof(ErrorInfo_struct));
2806                return_status = IO_OK;
2807                INIT_COMPLETION(wait);
2808                goto resend_cmd2;
2809        }
2810
2811command_done:
2812        /* unlock the buffers from DMA */
2813        buff_dma_handle.val32.lower = c->SG[0].Addr.lower;
2814        buff_dma_handle.val32.upper = c->SG[0].Addr.upper;
2815        pci_unmap_single(h->pdev, (dma_addr_t) buff_dma_handle.val,
2816                         c->SG[0].Len, PCI_DMA_BIDIRECTIONAL);
2817        return return_status;
2818}
2819
2820static int sendcmd_withirq(ctlr_info_t *h, __u8 cmd, void *buff, size_t size,
2821                           __u8 page_code, unsigned char scsi3addr[],
2822                        int cmd_type)
2823{
2824        CommandList_struct *c;
2825        int return_status;
2826
2827        c = cmd_special_alloc(h);
2828        if (!c)
2829                return -ENOMEM;
2830        return_status = fill_cmd(h, c, cmd, buff, size, page_code,
2831                scsi3addr, cmd_type);
2832        if (return_status == IO_OK)
2833                return_status = sendcmd_withirq_core(h, c, 1);
2834
2835        cmd_special_free(h, c);
2836        return return_status;
2837}
2838
2839static void cciss_geometry_inquiry(ctlr_info_t *h, int logvol,
2840                                   sector_t total_size,
2841                                   unsigned int block_size,
2842                                   InquiryData_struct *inq_buff,
2843                                   drive_info_struct *drv)
2844{
2845        int return_code;
2846        unsigned long t;
2847        unsigned char scsi3addr[8];
2848
2849        memset(inq_buff, 0, sizeof(InquiryData_struct));
2850        log_unit_to_scsi3addr(h, scsi3addr, logvol);
2851        return_code = sendcmd_withirq(h, CISS_INQUIRY, inq_buff,
2852                        sizeof(*inq_buff), 0xC1, scsi3addr, TYPE_CMD);
2853        if (return_code == IO_OK) {
2854                if (inq_buff->data_byte[8] == 0xFF) {
2855                        dev_warn(&h->pdev->dev,
2856                               "reading geometry failed, volume "
2857                               "does not support reading geometry\n");
2858                        drv->heads = 255;
2859                        drv->sectors = 32;      /* Sectors per track */
2860                        drv->cylinders = total_size + 1;
2861                        drv->raid_level = RAID_UNKNOWN;
2862                } else {
2863                        drv->heads = inq_buff->data_byte[6];
2864                        drv->sectors = inq_buff->data_byte[7];
2865                        drv->cylinders = (inq_buff->data_byte[4] & 0xff) << 8;
2866                        drv->cylinders += inq_buff->data_byte[5];
2867                        drv->raid_level = inq_buff->data_byte[8];
2868                }
2869                drv->block_size = block_size;
2870                drv->nr_blocks = total_size + 1;
2871                t = drv->heads * drv->sectors;
2872                if (t > 1) {
2873                        sector_t real_size = total_size + 1;
2874                        unsigned long rem = sector_div(real_size, t);
2875                        if (rem)
2876                                real_size++;
2877                        drv->cylinders = real_size;
2878                }
2879        } else {                /* Get geometry failed */
2880                dev_warn(&h->pdev->dev, "reading geometry failed\n");
2881        }
2882}
2883
2884static void
2885cciss_read_capacity(ctlr_info_t *h, int logvol, sector_t *total_size,
2886                    unsigned int *block_size)
2887{
2888        ReadCapdata_struct *buf;
2889        int return_code;
2890        unsigned char scsi3addr[8];
2891
2892        buf = kzalloc(sizeof(ReadCapdata_struct), GFP_KERNEL);
2893        if (!buf) {
2894                dev_warn(&h->pdev->dev, "out of memory\n");
2895                return;
2896        }
2897
2898        log_unit_to_scsi3addr(h, scsi3addr, logvol);
2899        return_code = sendcmd_withirq(h, CCISS_READ_CAPACITY, buf,
2900                sizeof(ReadCapdata_struct), 0, scsi3addr, TYPE_CMD);
2901        if (return_code == IO_OK) {
2902                *total_size = be32_to_cpu(*(__be32 *) buf->total_size);
2903                *block_size = be32_to_cpu(*(__be32 *) buf->block_size);
2904        } else {                /* read capacity command failed */
2905                dev_warn(&h->pdev->dev, "read capacity failed\n");
2906                *total_size = 0;
2907                *block_size = BLOCK_SIZE;
2908        }
2909        kfree(buf);
2910}
2911
2912static void cciss_read_capacity_16(ctlr_info_t *h, int logvol,
2913        sector_t *total_size, unsigned int *block_size)
2914{
2915        ReadCapdata_struct_16 *buf;
2916        int return_code;
2917        unsigned char scsi3addr[8];
2918
2919        buf = kzalloc(sizeof(ReadCapdata_struct_16), GFP_KERNEL);
2920        if (!buf) {
2921                dev_warn(&h->pdev->dev, "out of memory\n");
2922                return;
2923        }
2924
2925        log_unit_to_scsi3addr(h, scsi3addr, logvol);
2926        return_code = sendcmd_withirq(h, CCISS_READ_CAPACITY_16,
2927                buf, sizeof(ReadCapdata_struct_16),
2928                        0, scsi3addr, TYPE_CMD);
2929        if (return_code == IO_OK) {
2930                *total_size = be64_to_cpu(*(__be64 *) buf->total_size);
2931                *block_size = be32_to_cpu(*(__be32 *) buf->block_size);
2932        } else {                /* read capacity command failed */
2933                dev_warn(&h->pdev->dev, "read capacity failed\n");
2934                *total_size = 0;
2935                *block_size = BLOCK_SIZE;
2936        }
2937        dev_info(&h->pdev->dev, "      blocks= %llu block_size= %d\n",
2938               (unsigned long long)*total_size+1, *block_size);
2939        kfree(buf);
2940}
2941
2942static int cciss_revalidate(struct gendisk *disk)
2943{
2944        ctlr_info_t *h = get_host(disk);
2945        drive_info_struct *drv = get_drv(disk);
2946        int logvol;
2947        int FOUND = 0;
2948        unsigned int block_size;
2949        sector_t total_size;
2950        InquiryData_struct *inq_buff = NULL;
2951
2952        for (logvol = 0; logvol <= h->highest_lun; logvol++) {
2953                if (!h->drv[logvol])
2954                        continue;
2955                if (memcmp(h->drv[logvol]->LunID, drv->LunID,
2956                        sizeof(drv->LunID)) == 0) {
2957                        FOUND = 1;
2958                        break;
2959                }
2960        }
2961
2962        if (!FOUND)
2963                return 1;
2964
2965        inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
2966        if (inq_buff == NULL) {
2967                dev_warn(&h->pdev->dev, "out of memory\n");
2968                return 1;
2969        }
2970        if (h->cciss_read == CCISS_READ_10) {
2971                cciss_read_capacity(h, logvol,
2972                                        &total_size, &block_size);
2973        } else {
2974                cciss_read_capacity_16(h, logvol,
2975                                        &total_size, &block_size);
2976        }
2977        cciss_geometry_inquiry(h, logvol, total_size, block_size,
2978                               inq_buff, drv);
2979
2980        blk_queue_logical_block_size(drv->queue, drv->block_size);
2981        set_capacity(disk, drv->nr_blocks);
2982
2983        kfree(inq_buff);
2984        return 0;
2985}
2986
2987/*
2988 * Map (physical) PCI mem into (virtual) kernel space
2989 */
2990static void __iomem *remap_pci_mem(ulong base, ulong size)
2991{
2992        ulong page_base = ((ulong) base) & PAGE_MASK;
2993        ulong page_offs = ((ulong) base) - page_base;
2994        void __iomem *page_remapped = ioremap(page_base, page_offs + size);
2995
2996        return page_remapped ? (page_remapped + page_offs) : NULL;
2997}
2998
2999/*
3000 * Takes jobs of the Q and sends them to the hardware, then puts it on
3001 * the Q to wait for completion.
3002 */
3003static void start_io(ctlr_info_t *h)
3004{
3005        CommandList_struct *c;
3006
3007        while (!list_empty(&h->reqQ)) {
3008                c = list_entry(h->reqQ.next, CommandList_struct, list);
3009                /* can't do anything if fifo is full */
3010                if ((h->access.fifo_full(h))) {
3011                        dev_warn(&h->pdev->dev, "fifo full\n");
3012                        break;
3013                }
3014
3015                /* Get the first entry from the Request Q */
3016                removeQ(c);
3017                h->Qdepth--;
3018
3019                /* Tell the controller execute command */
3020                h->access.submit_command(h, c);
3021
3022                /* Put job onto the completed Q */
3023                addQ(&h->cmpQ, c);
3024        }
3025}
3026
3027/* Assumes that h->lock is held. */
3028/* Zeros out the error record and then resends the command back */
3029/* to the controller */
3030static inline void resend_cciss_cmd(ctlr_info_t *h, CommandList_struct *c)
3031{
3032        /* erase the old error information */
3033        memset(c->err_info, 0, sizeof(ErrorInfo_struct));
3034
3035        /* add it to software queue and then send it to the controller */
3036        addQ(&h->reqQ, c);
3037        h->Qdepth++;
3038        if (h->Qdepth > h->maxQsinceinit)
3039                h->maxQsinceinit = h->Qdepth;
3040
3041        start_io(h);
3042}
3043
3044static inline unsigned int make_status_bytes(unsigned int scsi_status_byte,
3045        unsigned int msg_byte, unsigned int host_byte,
3046        unsigned int driver_byte)
3047{
3048        /* inverse of macros in scsi.h */
3049        return (scsi_status_byte & 0xff) |
3050                ((msg_byte & 0xff) << 8) |
3051                ((host_byte & 0xff) << 16) |
3052                ((driver_byte & 0xff) << 24);
3053}
3054
3055static inline int evaluate_target_status(ctlr_info_t *h,
3056                        CommandList_struct *cmd, int *retry_cmd)
3057{
3058        unsigned char sense_key;
3059        unsigned char status_byte, msg_byte, host_byte, driver_byte;
3060        int error_value;
3061
3062        *retry_cmd = 0;
3063        /* If we get in here, it means we got "target status", that is, scsi status */
3064        status_byte = cmd->err_info->ScsiStatus;
3065        driver_byte = DRIVER_OK;
3066        msg_byte = cmd->err_info->CommandStatus; /* correct?  seems too device specific */
3067
3068        if (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC)
3069                host_byte = DID_PASSTHROUGH;
3070        else
3071                host_byte = DID_OK;
3072
3073        error_value = make_status_bytes(status_byte, msg_byte,
3074                host_byte, driver_byte);
3075
3076        if (cmd->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION) {
3077                if (cmd->rq->cmd_type != REQ_TYPE_BLOCK_PC)
3078                        dev_warn(&h->pdev->dev, "cmd %p "
3079                               "has SCSI Status 0x%x\n",
3080                               cmd, cmd->err_info->ScsiStatus);
3081                return error_value;
3082        }
3083
3084        /* check the sense key */
3085        sense_key = 0xf & cmd->err_info->SenseInfo[2];
3086        /* no status or recovered error */
3087        if (((sense_key == 0x0) || (sense_key == 0x1)) &&
3088            (cmd->rq->cmd_type != REQ_TYPE_BLOCK_PC))
3089                error_value = 0;
3090
3091        if (check_for_unit_attention(h, cmd)) {
3092                *retry_cmd = !(cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC);
3093                return 0;
3094        }
3095
3096        /* Not SG_IO or similar? */
3097        if (cmd->rq->cmd_type != REQ_TYPE_BLOCK_PC) {
3098                if (error_value != 0)
3099                        dev_warn(&h->pdev->dev, "cmd %p has CHECK CONDITION"
3100                               " sense key = 0x%x\n", cmd, sense_key);
3101                return error_value;
3102        }
3103
3104        /* SG_IO or similar, copy sense data back */
3105        if (cmd->rq->sense) {
3106                if (cmd->rq->sense_len > cmd->err_info->SenseLen)
3107                        cmd->rq->sense_len = cmd->err_info->SenseLen;
3108                memcpy(cmd->rq->sense, cmd->err_info->SenseInfo,
3109                        cmd->rq->sense_len);
3110        } else
3111                cmd->rq->sense_len = 0;
3112
3113        return error_value;
3114}
3115
3116/* checks the status of the job and calls complete buffers to mark all
3117 * buffers for the completed job. Note that this function does not need
3118 * to hold the hba/queue lock.
3119 */
3120static inline void complete_command(ctlr_info_t *h, CommandList_struct *cmd,
3121                                    int timeout)
3122{
3123        int retry_cmd = 0;
3124        struct request *rq = cmd->rq;
3125
3126        rq->errors = 0;
3127
3128        if (timeout)
3129                rq->errors = make_status_bytes(0, 0, 0, DRIVER_TIMEOUT);
3130
3131        if (cmd->err_info->CommandStatus == 0)  /* no error has occurred */
3132                goto after_error_processing;
3133
3134        switch (cmd->err_info->CommandStatus) {
3135        case CMD_TARGET_STATUS:
3136                rq->errors = evaluate_target_status(h, cmd, &retry_cmd);
3137                break;
3138        case CMD_DATA_UNDERRUN:
3139                if (cmd->rq->cmd_type == REQ_TYPE_FS) {
3140                        dev_warn(&h->pdev->dev, "cmd %p has"
3141                               " completed with data underrun "
3142                               "reported\n", cmd);
3143                        cmd->rq->resid_len = cmd->err_info->ResidualCnt;
3144                }
3145                break;
3146        case CMD_DATA_OVERRUN:
3147                if (cmd->rq->cmd_type == REQ_TYPE_FS)
3148                        dev_warn(&h->pdev->dev, "cciss: cmd %p has"
3149                               " completed with data overrun "
3150                               "reported\n", cmd);
3151                break;
3152        case CMD_INVALID:
3153                dev_warn(&h->pdev->dev, "cciss: cmd %p is "
3154                       "reported invalid\n", cmd);
3155                rq->errors = make_status_bytes(SAM_STAT_GOOD,
3156                        cmd->err_info->CommandStatus, DRIVER_OK,
3157                        (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
3158                                DID_PASSTHROUGH : DID_ERROR);
3159                break;
3160        case CMD_PROTOCOL_ERR:
3161                dev_warn(&h->pdev->dev, "cciss: cmd %p has "
3162                       "protocol error\n", cmd);
3163                rq->errors = make_status_bytes(SAM_STAT_GOOD,
3164                        cmd->err_info->CommandStatus, DRIVER_OK,
3165                        (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
3166                                DID_PASSTHROUGH : DID_ERROR);
3167                break;
3168        case CMD_HARDWARE_ERR:
3169                dev_warn(&h->pdev->dev, "cciss: cmd %p had "
3170                       " hardware error\n", cmd);
3171                rq->errors = make_status_bytes(SAM_STAT_GOOD,
3172                        cmd->err_info->CommandStatus, DRIVER_OK,
3173                        (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
3174                                DID_PASSTHROUGH : DID_ERROR);
3175                break;
3176        case CMD_CONNECTION_LOST:
3177                dev_warn(&h->pdev->dev, "cciss: cmd %p had "
3178                       "connection lost\n", cmd);
3179                rq->errors = make_status_bytes(SAM_STAT_GOOD,
3180                        cmd->err_info->CommandStatus, DRIVER_OK,
3181                        (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
3182                                DID_PASSTHROUGH : DID_ERROR);
3183                break;
3184        case CMD_ABORTED:
3185                dev_warn(&h->pdev->dev, "cciss: cmd %p was "
3186                       "aborted\n", cmd);
3187                rq->errors = make_status_bytes(SAM_STAT_GOOD,
3188                        cmd->err_info->CommandStatus, DRIVER_OK,
3189                        (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
3190                                DID_PASSTHROUGH : DID_ABORT);
3191                break;
3192        case CMD_ABORT_FAILED:
3193                dev_warn(&h->pdev->dev, "cciss: cmd %p reports "
3194                       "abort failed\n", cmd);
3195                rq->errors = make_status_bytes(SAM_STAT_GOOD,
3196                        cmd->err_info->CommandStatus, DRIVER_OK,
3197                        (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
3198                                DID_PASSTHROUGH : DID_ERROR);
3199                break;
3200        case CMD_UNSOLICITED_ABORT:
3201                dev_warn(&h->pdev->dev, "cciss%d: unsolicited "
3202                       "abort %p\n", h->ctlr, cmd);
3203                if (cmd->retry_count < MAX_CMD_RETRIES) {
3204                        retry_cmd = 1;
3205                        dev_warn(&h->pdev->dev, "retrying %p\n", cmd);
3206                        cmd->retry_count++;
3207                } else
3208                        dev_warn(&h->pdev->dev,
3209                                "%p retried too many times\n", cmd);
3210                rq->errors = make_status_bytes(SAM_STAT_GOOD,
3211                        cmd->err_info->CommandStatus, DRIVER_OK,
3212                        (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
3213                                DID_PASSTHROUGH : DID_ABORT);
3214                break;
3215        case CMD_TIMEOUT:
3216                dev_warn(&h->pdev->dev, "cmd %p timedout\n", cmd);
3217                rq->errors = make_status_bytes(SAM_STAT_GOOD,
3218                        cmd->err_info->CommandStatus, DRIVER_OK,
3219                        (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
3220                                DID_PASSTHROUGH : DID_ERROR);
3221                break;
3222        case CMD_UNABORTABLE:
3223                dev_warn(&h->pdev->dev, "cmd %p unabortable\n", cmd);
3224                rq->errors = make_status_bytes(SAM_STAT_GOOD,
3225                        cmd->err_info->CommandStatus, DRIVER_OK,
3226                        cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC ?
3227                                DID_PASSTHROUGH : DID_ERROR);
3228                break;
3229        default:
3230                dev_warn(&h->pdev->dev, "cmd %p returned "
3231                       "unknown status %x\n", cmd,
3232                       cmd->err_info->CommandStatus);
3233                rq->errors = make_status_bytes(SAM_STAT_GOOD,
3234                        cmd->err_info->CommandStatus, DRIVER_OK,
3235                        (cmd->rq->cmd_type == REQ_TYPE_BLOCK_PC) ?
3236                                DID_PASSTHROUGH : DID_ERROR);
3237        }
3238
3239after_error_processing:
3240
3241        /* We need to return this command */
3242        if (retry_cmd) {
3243                resend_cciss_cmd(h, cmd);
3244                return;
3245        }
3246        cmd->rq->completion_data = cmd;
3247        blk_complete_request(cmd->rq);
3248}
3249
3250static inline u32 cciss_tag_contains_index(u32 tag)
3251{
3252#define DIRECT_LOOKUP_BIT 0x10
3253        return tag & DIRECT_LOOKUP_BIT;
3254}
3255
3256static inline u32 cciss_tag_to_index(u32 tag)
3257{
3258#define DIRECT_LOOKUP_SHIFT 5
3259        return tag >> DIRECT_LOOKUP_SHIFT;
3260}
3261
3262static inline u32 cciss_tag_discard_error_bits(ctlr_info_t *h, u32 tag)
3263{
3264#define CCISS_PERF_ERROR_BITS ((1 << DIRECT_LOOKUP_SHIFT) - 1)
3265#define CCISS_SIMPLE_ERROR_BITS 0x03
3266        if (likely(h->transMethod & CFGTBL_Trans_Performant))
3267                return tag & ~CCISS_PERF_ERROR_BITS;
3268        return tag & ~CCISS_SIMPLE_ERROR_BITS;
3269}
3270
3271static inline void cciss_mark_tag_indexed(u32 *tag)
3272{
3273        *tag |= DIRECT_LOOKUP_BIT;
3274}
3275
3276static inline void cciss_set_tag_index(u32 *tag, u32 index)
3277{
3278        *tag |= (index << DIRECT_LOOKUP_SHIFT);
3279}
3280
3281/*
3282 * Get a request and submit it to the controller.
3283 */
3284static void do_cciss_request(struct request_queue *q)
3285{
3286        ctlr_info_t *h = q->queuedata;
3287        CommandList_struct *c;
3288        sector_t start_blk;
3289        int seg;
3290        struct request *creq;
3291        u64bit temp64;
3292        struct scatterlist *tmp_sg;
3293        SGDescriptor_struct *curr_sg;
3294        drive_info_struct *drv;
3295        int i, dir;
3296        int sg_index = 0;
3297        int chained = 0;
3298
3299      queue:
3300        creq = blk_peek_request(q);
3301        if (!creq)
3302                goto startio;
3303
3304        BUG_ON(creq->nr_phys_segments > h->maxsgentries);
3305
3306        c = cmd_alloc(h);
3307        if (!c)
3308                goto full;
3309
3310        blk_start_request(creq);
3311
3312        tmp_sg = h->scatter_list[c->cmdindex];
3313        spin_unlock_irq(q->queue_lock);
3314
3315        c->cmd_type = CMD_RWREQ;
3316        c->rq = creq;
3317
3318        /* fill in the request */
3319        drv = creq->rq_disk->private_data;
3320        c->Header.ReplyQueue = 0;       /* unused in simple mode */
3321        /* got command from pool, so use the command block index instead */
3322        /* for direct lookups. */
3323        /* The first 2 bits are reserved for controller error reporting. */
3324        cciss_set_tag_index(&c->Header.Tag.lower, c->cmdindex);
3325        cciss_mark_tag_indexed(&c->Header.Tag.lower);
3326        memcpy(&c->Header.LUN, drv->LunID, sizeof(drv->LunID));
3327        c->Request.CDBLen = 10; /* 12 byte commands not in FW yet; */
3328        c->Request.Type.Type = TYPE_CMD;        /* It is a command. */
3329        c->Request.Type.Attribute = ATTR_SIMPLE;
3330        c->Request.Type.Direction =
3331            (rq_data_dir(creq) == READ) ? XFER_READ : XFER_WRITE;
3332        c->Request.Timeout = 0; /* Don't time out */
3333        c->Request.CDB[0] =
3334            (rq_data_dir(creq) == READ) ? h->cciss_read : h->cciss_write;
3335        start_blk = blk_rq_pos(creq);
3336        dev_dbg(&h->pdev->dev, "sector =%d nr_sectors=%d\n",
3337               (int)blk_rq_pos(creq), (int)blk_rq_sectors(creq));
3338        sg_init_table(tmp_sg, h->maxsgentries);
3339        seg = blk_rq_map_sg(q, creq, tmp_sg);
3340
3341        /* get the DMA records for the setup */
3342        if (c->Request.Type.Direction == XFER_READ)
3343                dir = PCI_DMA_FROMDEVICE;
3344        else
3345                dir = PCI_DMA_TODEVICE;
3346
3347        curr_sg = c->SG;
3348        sg_index = 0;
3349        chained = 0;
3350
3351        for (i = 0; i < seg; i++) {
3352                if (((sg_index+1) == (h->max_cmd_sgentries)) &&
3353                        !chained && ((seg - i) > 1)) {
3354                        /* Point to next chain block. */
3355                        curr_sg = h->cmd_sg_list[c->cmdindex];
3356                        sg_index = 0;
3357                        chained = 1;
3358                }
3359                curr_sg[sg_index].Len = tmp_sg[i].length;
3360                temp64.val = (__u64) pci_map_page(h->pdev, sg_page(&tmp_sg[i]),
3361                                                tmp_sg[i].offset,
3362                                                tmp_sg[i].length, dir);
3363                curr_sg[sg_index].Addr.lower = temp64.val32.lower;
3364                curr_sg[sg_index].Addr.upper = temp64.val32.upper;
3365                curr_sg[sg_index].Ext = 0;  /* we are not chaining */
3366                ++sg_index;
3367        }
3368        if (chained)
3369                cciss_map_sg_chain_block(h, c, h->cmd_sg_list[c->cmdindex],
3370                        (seg - (h->max_cmd_sgentries - 1)) *
3371                                sizeof(SGDescriptor_struct));
3372
3373        /* track how many SG entries we are using */
3374        if (seg > h->maxSG)
3375                h->maxSG = seg;
3376
3377        dev_dbg(&h->pdev->dev, "Submitting %u sectors in %d segments "
3378                        "chained[%d]\n",
3379                        blk_rq_sectors(creq), seg, chained);
3380
3381        c->Header.SGTotal = seg + chained;
3382        if (seg <= h->max_cmd_sgentries)
3383                c->Header.SGList = c->Header.SGTotal;
3384        else
3385                c->Header.SGList = h->max_cmd_sgentries;
3386        set_performant_mode(h, c);
3387
3388        if (likely(creq->cmd_type == REQ_TYPE_FS)) {
3389                if(h->cciss_read == CCISS_READ_10) {
3390                        c->Request.CDB[1] = 0;
3391                        c->Request.CDB[2] = (start_blk >> 24) & 0xff; /* MSB */
3392                        c->Request.CDB[3] = (start_blk >> 16) & 0xff;
3393                        c->Request.CDB[4] = (start_blk >> 8) & 0xff;
3394                        c->Request.CDB[5] = start_blk & 0xff;
3395                        c->Request.CDB[6] = 0; /* (sect >> 24) & 0xff; MSB */
3396                        c->Request.CDB[7] = (blk_rq_sectors(creq) >> 8) & 0xff;
3397                        c->Request.CDB[8] = blk_rq_sectors(creq) & 0xff;
3398                        c->Request.CDB[9] = c->Request.CDB[11] = c->Request.CDB[12] = 0;
3399                } else {
3400                        u32 upper32 = upper_32_bits(start_blk);
3401
3402                        c->Request.CDBLen = 16;
3403                        c->Request.CDB[1]= 0;
3404                        c->Request.CDB[2]= (upper32 >> 24) & 0xff; /* MSB */
3405                        c->Request.CDB[3]= (upper32 >> 16) & 0xff;
3406                        c->Request.CDB[4]= (upper32 >>  8) & 0xff;
3407                        c->Request.CDB[5]= upper32 & 0xff;
3408                        c->Request.CDB[6]= (start_blk >> 24) & 0xff;
3409                        c->Request.CDB[7]= (start_blk >> 16) & 0xff;
3410                        c->Request.CDB[8]= (start_blk >>  8) & 0xff;
3411                        c->Request.CDB[9]= start_blk & 0xff;
3412                        c->Request.CDB[10]= (blk_rq_sectors(creq) >> 24) & 0xff;
3413                        c->Request.CDB[11]= (blk_rq_sectors(creq) >> 16) & 0xff;
3414                        c->Request.CDB[12]= (blk_rq_sectors(creq) >>  8) & 0xff;
3415                        c->Request.CDB[13]= blk_rq_sectors(creq) & 0xff;
3416                        c->Request.CDB[14] = c->Request.CDB[15] = 0;
3417                }
3418        } else if (creq->cmd_type == REQ_TYPE_BLOCK_PC) {
3419                c->Request.CDBLen = creq->cmd_len;
3420                memcpy(c->Request.CDB, creq->cmd, BLK_MAX_CDB);
3421        } else {
3422                dev_warn(&h->pdev->dev, "bad request type %d\n",
3423                        creq->cmd_type);
3424                BUG();
3425        }
3426
3427        spin_lock_irq(q->queue_lock);
3428
3429        addQ(&h->reqQ, c);
3430        h->Qdepth++;
3431        if (h->Qdepth > h->maxQsinceinit)
3432                h->maxQsinceinit = h->Qdepth;
3433
3434        goto queue;
3435full:
3436        blk_stop_queue(q);
3437startio:
3438        /* We will already have the driver lock here so not need
3439         * to lock it.
3440         */
3441        start_io(h);
3442}
3443
3444static inline unsigned long get_next_completion(ctlr_info_t *h)
3445{
3446        return h->access.command_completed(h);
3447}
3448
3449static inline int interrupt_pending(ctlr_info_t *h)
3450{
3451        return h->access.intr_pending(h);
3452}
3453
3454static inline long interrupt_not_for_us(ctlr_info_t *h)
3455{
3456        return ((h->access.intr_pending(h) == 0) ||
3457                (h->interrupts_enabled == 0));
3458}
3459
3460static inline int bad_tag(ctlr_info_t *h, u32 tag_index,
3461                        u32 raw_tag)
3462{
3463        if (unlikely(tag_index >= h->nr_cmds)) {
3464                dev_warn(&h->pdev->dev, "bad tag 0x%08x ignored.\n", raw_tag);
3465                return 1;
3466        }
3467        return 0;
3468}
3469
3470static inline void finish_cmd(ctlr_info_t *h, CommandList_struct *c,
3471                                u32 raw_tag)
3472{
3473        removeQ(c);
3474        if (likely(c->cmd_type == CMD_RWREQ))
3475                complete_command(h, c, 0);
3476        else if (c->cmd_type == CMD_IOCTL_PEND)
3477                complete(c->waiting);
3478#ifdef CONFIG_CISS_SCSI_TAPE
3479        else if (c->cmd_type == CMD_SCSI)
3480                complete_scsi_command(c, 0, raw_tag);
3481#endif
3482}
3483
3484static inline u32 next_command(ctlr_info_t *h)
3485{
3486        u32 a;
3487
3488        if (unlikely(!(h->transMethod & CFGTBL_Trans_Performant)))
3489                return h->access.command_completed(h);
3490
3491        if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) {
3492                a = *(h->reply_pool_head); /* Next cmd in ring buffer */
3493                (h->reply_pool_head)++;
3494                h->commands_outstanding--;
3495        } else {
3496                a = FIFO_EMPTY;
3497        }
3498        /* Check for wraparound */
3499        if (h->reply_pool_head == (h->reply_pool + h->max_commands)) {
3500                h->reply_pool_head = h->reply_pool;
3501                h->reply_pool_wraparound ^= 1;
3502        }
3503        return a;
3504}
3505
3506/* process completion of an indexed ("direct lookup") command */
3507static inline u32 process_indexed_cmd(ctlr_info_t *h, u32 raw_tag)
3508{
3509        u32 tag_index;
3510        CommandList_struct *c;
3511
3512        tag_index = cciss_tag_to_index(raw_tag);
3513        if (bad_tag(h, tag_index, raw_tag))
3514                return next_command(h);
3515        c = h->cmd_pool + tag_index;
3516        finish_cmd(h, c, raw_tag);
3517        return next_command(h);
3518}
3519
3520/* process completion of a non-indexed command */
3521static inline u32 process_nonindexed_cmd(ctlr_info_t *h, u32 raw_tag)
3522{
3523        CommandList_struct *c = NULL;
3524        __u32 busaddr_masked, tag_masked;
3525
3526        tag_masked = cciss_tag_discard_error_bits(h, raw_tag);
3527        list_for_each_entry(c, &h->cmpQ, list) {
3528                busaddr_masked = cciss_tag_discard_error_bits(h, c->busaddr);
3529                if (busaddr_masked == tag_masked) {
3530                        finish_cmd(h, c, raw_tag);
3531                        return next_command(h);
3532                }
3533        }
3534        bad_tag(h, h->nr_cmds + 1, raw_tag);
3535        return next_command(h);
3536}
3537
3538/* Some controllers, like p400, will give us one interrupt
3539 * after a soft reset, even if we turned interrupts off.
3540 * Only need to check for this in the cciss_xxx_discard_completions
3541 * functions.
3542 */
3543static int ignore_bogus_interrupt(ctlr_info_t *h)
3544{
3545        if (likely(!reset_devices))
3546                return 0;
3547
3548        if (likely(h->interrupts_enabled))
3549                return 0;
3550
3551        dev_info(&h->pdev->dev, "Received interrupt while interrupts disabled "
3552                "(known firmware bug.)  Ignoring.\n");
3553
3554        return 1;
3555}
3556
3557static irqreturn_t cciss_intx_discard_completions(int irq, void *dev_id)
3558{
3559        ctlr_info_t *h = dev_id;
3560        unsigned long flags;
3561        u32 raw_tag;
3562
3563        if (ignore_bogus_interrupt(h))
3564                return IRQ_NONE;
3565
3566        if (interrupt_not_for_us(h))
3567                return IRQ_NONE;
3568        spin_lock_irqsave(&h->lock, flags);
3569        while (interrupt_pending(h)) {
3570                raw_tag = get_next_completion(h);
3571                while (raw_tag != FIFO_EMPTY)
3572                        raw_tag = next_command(h);
3573        }
3574        spin_unlock_irqrestore(&h->lock, flags);
3575        return IRQ_HANDLED;
3576}
3577
3578static irqreturn_t cciss_msix_discard_completions(int irq, void *dev_id)
3579{
3580        ctlr_info_t *h = dev_id;
3581        unsigned long flags;
3582        u32 raw_tag;
3583
3584        if (ignore_bogus_interrupt(h))
3585                return IRQ_NONE;
3586
3587        spin_lock_irqsave(&h->lock, flags);
3588        raw_tag = get_next_completion(h);
3589        while (raw_tag != FIFO_EMPTY)
3590                raw_tag = next_command(h);
3591        spin_unlock_irqrestore(&h->lock, flags);
3592        return IRQ_HANDLED;
3593}
3594
3595static irqreturn_t do_cciss_intx(int irq, void *dev_id)
3596{
3597        ctlr_info_t *h = dev_id;
3598        unsigned long flags;
3599        u32 raw_tag;
3600
3601        if (interrupt_not_for_us(h))
3602                return IRQ_NONE;
3603        spin_lock_irqsave(&h->lock, flags);
3604        while (interrupt_pending(h)) {
3605                raw_tag = get_next_completion(h);
3606                while (raw_tag != FIFO_EMPTY) {
3607                        if (cciss_tag_contains_index(raw_tag))
3608                                raw_tag = process_indexed_cmd(h, raw_tag);
3609                        else
3610                                raw_tag = process_nonindexed_cmd(h, raw_tag);
3611                }
3612        }
3613        spin_unlock_irqrestore(&h->lock, flags);
3614        return IRQ_HANDLED;
3615}
3616
3617/* Add a second interrupt handler for MSI/MSI-X mode. In this mode we never
3618 * check the interrupt pending register because it is not set.
3619 */
3620static irqreturn_t do_cciss_msix_intr(int irq, void *dev_id)
3621{
3622        ctlr_info_t *h = dev_id;
3623        unsigned long flags;
3624        u32 raw_tag;
3625
3626        spin_lock_irqsave(&h->lock, flags);
3627        raw_tag = get_next_completion(h);
3628        while (raw_tag != FIFO_EMPTY) {
3629                if (cciss_tag_contains_index(raw_tag))
3630                        raw_tag = process_indexed_cmd(h, raw_tag);
3631                else
3632                        raw_tag = process_nonindexed_cmd(h, raw_tag);
3633        }
3634        spin_unlock_irqrestore(&h->lock, flags);
3635        return IRQ_HANDLED;
3636}
3637
3638/**
3639 * add_to_scan_list() - add controller to rescan queue
3640 * @h:                Pointer to the controller.
3641 *
3642 * Adds the controller to the rescan queue if not already on the queue.
3643 *
3644 * returns 1 if added to the queue, 0 if skipped (could be on the
3645 * queue already, or the controller could be initializing or shutting
3646 * down).
3647 **/
3648static int add_to_scan_list(struct ctlr_info *h)
3649{
3650        struct ctlr_info *test_h;
3651        int found = 0;
3652        int ret = 0;
3653
3654        if (h->busy_initializing)
3655                return 0;
3656
3657        if (!mutex_trylock(&h->busy_shutting_down))
3658                return 0;
3659
3660        mutex_lock(&scan_mutex);
3661        list_for_each_entry(test_h, &scan_q, scan_list) {
3662                if (test_h == h) {
3663                        found = 1;
3664                        break;
3665                }
3666        }
3667        if (!found && !h->busy_scanning) {
3668                INIT_COMPLETION(h->scan_wait);
3669                list_add_tail(&h->scan_list, &scan_q);
3670                ret = 1;
3671        }
3672        mutex_unlock(&scan_mutex);
3673        mutex_unlock(&h->busy_shutting_down);
3674
3675        return ret;
3676}
3677
3678/**
3679 * remove_from_scan_list() - remove controller from rescan queue
3680 * @h:                     Pointer to the controller.
3681 *
3682 * Removes the controller from the rescan queue if present. Blocks if
3683 * the controller is currently conducting a rescan.  The controller
3684 * can be in one of three states:
3685 * 1. Doesn't need a scan
3686 * 2. On the scan list, but not scanning yet (we remove it)
3687 * 3. Busy scanning (and not on the list). In this case we want to wait for
3688 *    the scan to complete to make sure the scanning thread for this
3689 *    controller is completely idle.
3690 **/
3691static void remove_from_scan_list(struct ctlr_info *h)
3692{
3693        struct ctlr_info *test_h, *tmp_h;
3694
3695        mutex_lock(&scan_mutex);
3696        list_for_each_entry_safe(test_h, tmp_h, &scan_q, scan_list) {
3697                if (test_h == h) { /* state 2. */
3698                        list_del(&h->scan_list);
3699                        complete_all(&h->scan_wait);
3700                        mutex_unlock(&scan_mutex);
3701                        return;
3702                }
3703        }
3704        if (h->busy_scanning) { /* state 3. */
3705                mutex_unlock(&scan_mutex);
3706                wait_for_completion(&h->scan_wait);
3707        } else { /* state 1, nothing to do. */
3708                mutex_unlock(&scan_mutex);
3709        }
3710}
3711
3712/**
3713 * scan_thread() - kernel thread used to rescan controllers
3714 * @data:        Ignored.
3715 *
3716 * A kernel thread used scan for drive topology changes on
3717 * controllers. The thread processes only one controller at a time
3718 * using a queue.  Controllers are added to the queue using
3719 * add_to_scan_list() and removed from the queue either after done
3720 * processing or using remove_from_scan_list().
3721 *
3722 * returns 0.
3723 **/
3724static int scan_thread(void *data)
3725{
3726        struct ctlr_info *h;
3727
3728        while (1) {
3729                set_current_state(TASK_INTERRUPTIBLE);
3730                schedule();
3731                if (kthread_should_stop())
3732                        break;
3733
3734                while (1) {
3735                        mutex_lock(&scan_mutex);
3736                        if (list_empty(&scan_q)) {
3737                                mutex_unlock(&scan_mutex);
3738                                break;
3739                        }
3740
3741                        h = list_entry(scan_q.next,
3742                                       struct ctlr_info,
3743                                       scan_list);
3744                        list_del(&h->scan_list);
3745                        h->busy_scanning = 1;
3746                        mutex_unlock(&scan_mutex);
3747
3748                        rebuild_lun_table(h, 0, 0);
3749                        complete_all(&h->scan_wait);
3750                        mutex_lock(&scan_mutex);
3751                        h->busy_scanning = 0;
3752                        mutex_unlock(&scan_mutex);
3753                }
3754        }
3755
3756        return 0;
3757}
3758
3759static int check_for_unit_attention(ctlr_info_t *h, CommandList_struct *c)
3760{
3761        if (c->err_info->SenseInfo[2] != UNIT_ATTENTION)
3762                return 0;
3763
3764        switch (c->err_info->SenseInfo[12]) {
3765        case STATE_CHANGED:
3766                dev_warn(&h->pdev->dev, "a state change "
3767                        "detected, command retried\n");
3768                return 1;
3769        break;
3770        case LUN_FAILED:
3771                dev_warn(&h->pdev->dev, "LUN failure "
3772                        "detected, action required\n");
3773                return 1;
3774        break;
3775        case REPORT_LUNS_CHANGED:
3776                dev_warn(&h->pdev->dev, "report LUN data changed\n");
3777        /*
3778         * Here, we could call add_to_scan_list and wake up the scan thread,
3779         * except that it's quite likely that we will get more than one
3780         * REPORT_LUNS_CHANGED condition in quick succession, which means
3781         * that those which occur after the first one will likely happen
3782         * *during* the scan_thread's rescan.  And the rescan code is not
3783         * robust enough to restart in the middle, undoing what it has already
3784         * done, and it's not clear that it's even possible to do this, since
3785         * part of what it does is notify the block layer, which starts
3786         * doing it's own i/o to read partition tables and so on, and the
3787         * driver doesn't have visibility to know what might need undoing.
3788         * In any event, if possible, it is horribly complicated to get right
3789         * so we just don't do it for now.
3790         *
3791         * Note: this REPORT_LUNS_CHANGED condition only occurs on the MSA2012.
3792         */
3793                return 1;
3794        break;
3795        case POWER_OR_RESET:
3796                dev_warn(&h->pdev->dev,
3797                        "a power on or device reset detected\n");
3798                return 1;
3799        break;
3800        case UNIT_ATTENTION_CLEARED:
3801                dev_warn(&h->pdev->dev,
3802                        "unit attention cleared by another initiator\n");
3803                return 1;
3804        break;
3805        default:
3806                dev_warn(&h->pdev->dev, "unknown unit attention detected\n");
3807                return 1;
3808        }
3809}
3810
3811/*
3812 *  We cannot read the structure directly, for portability we must use
3813 *   the io functions.
3814 *   This is for debug only.
3815 */
3816static void print_cfg_table(ctlr_info_t *h)
3817{
3818        int i;
3819        char temp_name[17];
3820        CfgTable_struct *tb = h->cfgtable;
3821
3822        dev_dbg(&h->pdev->dev, "Controller Configuration information\n");
3823        dev_dbg(&h->pdev->dev, "------------------------------------\n");
3824        for (i = 0; i < 4; i++)
3825                temp_name[i] = readb(&(tb->Signature[i]));
3826        temp_name[4] = '\0';
3827        dev_dbg(&h->pdev->dev, "   Signature = %s\n", temp_name);
3828        dev_dbg(&h->pdev->dev, "   Spec Number = %d\n",
3829                readl(&(tb->SpecValence)));
3830        dev_dbg(&h->pdev->dev, "   Transport methods supported = 0x%x\n",
3831               readl(&(tb->TransportSupport)));
3832        dev_dbg(&h->pdev->dev, "   Transport methods active = 0x%x\n",
3833               readl(&(tb->TransportActive)));
3834        dev_dbg(&h->pdev->dev, "   Requested transport Method = 0x%x\n",
3835               readl(&(tb->HostWrite.TransportRequest)));
3836        dev_dbg(&h->pdev->dev, "   Coalesce Interrupt Delay = 0x%x\n",
3837               readl(&(tb->HostWrite.CoalIntDelay)));
3838        dev_dbg(&h->pdev->dev, "   Coalesce Interrupt Count = 0x%x\n",
3839               readl(&(tb->HostWrite.CoalIntCount)));
3840        dev_dbg(&h->pdev->dev, "   Max outstanding commands = 0x%d\n",
3841               readl(&(tb->CmdsOutMax)));
3842        dev_dbg(&h->pdev->dev, "   Bus Types = 0x%x\n",
3843                readl(&(tb->BusTypes)));
3844        for (i = 0; i < 16; i++)
3845                temp_name[i] = readb(&(tb->ServerName[i]));
3846        temp_name[16] = '\0';
3847        dev_dbg(&h->pdev->dev, "   Server Name = %s\n", temp_name);
3848        dev_dbg(&h->pdev->dev, "   Heartbeat Counter = 0x%x\n\n\n",
3849                readl(&(tb->HeartBeat)));
3850}
3851
3852static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr)
3853{
3854        int i, offset, mem_type, bar_type;
3855        if (pci_bar_addr == PCI_BASE_ADDRESS_0) /* looking for BAR zero? */
3856                return 0;
3857        offset = 0;
3858        for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
3859                bar_type = pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE;
3860                if (bar_type == PCI_BASE_ADDRESS_SPACE_IO)
3861                        offset += 4;
3862                else {
3863                        mem_type = pci_resource_flags(pdev, i) &
3864                            PCI_BASE_ADDRESS_MEM_TYPE_MASK;
3865                        switch (mem_type) {
3866                        case PCI_BASE_ADDRESS_MEM_TYPE_32:
3867                        case PCI_BASE_ADDRESS_MEM_TYPE_1M:
3868                                offset += 4;    /* 32 bit */
3869                                break;
3870                        case PCI_BASE_ADDRESS_MEM_TYPE_64:
3871                                offset += 8;
3872                                break;
3873                        default:        /* reserved in PCI 2.2 */
3874                                dev_warn(&pdev->dev,
3875                                       "Base address is invalid\n");
3876                                return -1;
3877                                break;
3878                        }
3879                }
3880                if (offset == pci_bar_addr - PCI_BASE_ADDRESS_0)
3881                        return i + 1;
3882        }
3883        return -1;
3884}
3885
3886/* Fill in bucket_map[], given nsgs (the max number of
3887 * scatter gather elements supported) and bucket[],
3888 * which is an array of 8 integers.  The bucket[] array
3889 * contains 8 different DMA transfer sizes (in 16
3890 * byte increments) which the controller uses to fetch
3891 * commands.  This function fills in bucket_map[], which
3892 * maps a given number of scatter gather elements to one of
3893 * the 8 DMA transfer sizes.  The point of it is to allow the
3894 * controller to only do as much DMA as needed to fetch the
3895 * command, with the DMA transfer size encoded in the lower
3896 * bits of the command address.
3897 */
3898static void  calc_bucket_map(int bucket[], int num_buckets,
3899        int nsgs, int *bucket_map)
3900{
3901        int i, j, b, size;
3902
3903        /* even a command with 0 SGs requires 4 blocks */
3904#define MINIMUM_TRANSFER_BLOCKS 4
3905#define NUM_BUCKETS 8
3906        /* Note, bucket_map must have nsgs+1 entries. */
3907        for (i = 0; i <= nsgs; i++) {
3908                /* Compute size of a command with i SG entries */
3909                size = i + MINIMUM_TRANSFER_BLOCKS;
3910                b = num_buckets; /* Assume the biggest bucket */
3911                /* Find the bucket that is just big enough */
3912                for (j = 0; j < 8; j++) {
3913                        if (bucket[j] >= size) {
3914                                b = j;
3915                                break;
3916                        }
3917                }
3918                /* for a command with i SG entries, use bucket b. */
3919                bucket_map[i] = b;
3920        }
3921}
3922
3923static void __devinit cciss_wait_for_mode_change_ack(ctlr_info_t *h)
3924{
3925        int i;
3926
3927        /* under certain very rare conditions, this can take awhile.
3928         * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
3929         * as we enter this code.) */
3930        for (i = 0; i < MAX_CONFIG_WAIT; i++) {
3931                if (!(readl(h->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq))
3932                        break;
3933                usleep_range(10000, 20000);
3934        }
3935}
3936
3937static __devinit void cciss_enter_performant_mode(ctlr_info_t *h,
3938        u32 use_short_tags)
3939{
3940        /* This is a bit complicated.  There are 8 registers on
3941         * the controller which we write to to tell it 8 different
3942         * sizes of commands which there may be.  It's a way of
3943         * reducing the DMA done to fetch each command.  Encoded into
3944         * each command's tag are 3 bits which communicate to the controller
3945         * which of the eight sizes that command fits within.  The size of
3946         * each command depends on how many scatter gather entries there are.
3947         * Each SG entry requires 16 bytes.  The eight registers are programmed
3948         * with the number of 16-byte blocks a command of that size requires.
3949         * The smallest command possible requires 5 such 16 byte blocks.
3950         * the largest command possible requires MAXSGENTRIES + 4 16-byte
3951         * blocks.  Note, this only extends to the SG entries contained
3952         * within the command block, and does not extend to chained blocks
3953         * of SG elements.   bft[] contains the eight values we write to
3954         * the registers.  They are not evenly distributed, but have more
3955         * sizes for small commands, and fewer sizes for larger commands.
3956         */
3957        __u32 trans_offset;
3958        int bft[8] = { 5, 6, 8, 10, 12, 20, 28, MAXSGENTRIES + 4};
3959                        /*
3960                         *  5 = 1 s/g entry or 4k
3961                         *  6 = 2 s/g entry or 8k
3962                         *  8 = 4 s/g entry or 16k
3963                         * 10 = 6 s/g entry or 24k
3964                         */
3965        unsigned long register_value;
3966        BUILD_BUG_ON(28 > MAXSGENTRIES + 4);
3967
3968        h->reply_pool_wraparound = 1; /* spec: init to 1 */
3969
3970        /* Controller spec: zero out this buffer. */
3971        memset(h->reply_pool, 0, h->max_commands * sizeof(__u64));
3972        h->reply_pool_head = h->reply_pool;
3973
3974        trans_offset = readl(&(h->cfgtable->TransMethodOffset));
3975        calc_bucket_map(bft, ARRAY_SIZE(bft), h->maxsgentries,
3976                                h->blockFetchTable);
3977        writel(bft[0], &h->transtable->BlockFetch0);
3978        writel(bft[1], &h->transtable->BlockFetch1);
3979        writel(bft[2], &h->transtable->BlockFetch2);
3980        writel(bft[3], &h->transtable->BlockFetch3);
3981        writel(bft[4], &h->transtable->BlockFetch4);
3982        writel(bft[5], &h->transtable->BlockFetch5);
3983        writel(bft[6], &h->transtable->BlockFetch6);
3984        writel(bft[7], &h->transtable->BlockFetch7);
3985
3986        /* size of controller ring buffer */
3987        writel(h->max_commands, &h->transtable->RepQSize);
3988        writel(1, &h->transtable->RepQCount);
3989        writel(0, &h->transtable->RepQCtrAddrLow32);
3990        writel(0, &h->transtable->RepQCtrAddrHigh32);
3991        writel(h->reply_pool_dhandle, &h->transtable->RepQAddr0Low32);
3992        writel(0, &h->transtable->RepQAddr0High32);
3993        writel(CFGTBL_Trans_Performant | use_short_tags,
3994                        &(h->cfgtable->HostWrite.TransportRequest));
3995
3996        writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
3997        cciss_wait_for_mode_change_ack(h);
3998        register_value = readl(&(h->cfgtable->TransportActive));
3999        if (!(register_value & CFGTBL_Trans_Performant))
4000                dev_warn(&h->pdev->dev, "cciss: unable to get board into"
4001                                        " performant mode\n");
4002}
4003
4004static void __devinit cciss_put_controller_into_performant_mode(ctlr_info_t *h)
4005{
4006        __u32 trans_support;
4007
4008        if (cciss_simple_mode)
4009                return;
4010
4011        dev_dbg(&h->pdev->dev, "Trying to put board into Performant mode\n");
4012        /* Attempt to put controller into performant mode if supported */
4013        /* Does board support performant mode? */
4014        trans_support = readl(&(h->cfgtable->TransportSupport));
4015        if (!(trans_support & PERFORMANT_MODE))
4016                return;
4017
4018        dev_dbg(&h->pdev->dev, "Placing controller into performant mode\n");
4019        /* Performant mode demands commands on a 32 byte boundary
4020         * pci_alloc_consistent aligns on page boundarys already.
4021         * Just need to check if divisible by 32
4022         */
4023        if ((sizeof(CommandList_struct) % 32) != 0) {
4024                dev_warn(&h->pdev->dev, "%s %d %s\n",
4025                        "cciss info: command size[",
4026                        (int)sizeof(CommandList_struct),
4027                        "] not divisible by 32, no performant mode..\n");
4028                return;
4029        }
4030
4031        /* Performant mode ring buffer and supporting data structures */
4032        h->reply_pool = (__u64 *)pci_alloc_consistent(
4033                h->pdev, h->max_commands * sizeof(__u64),
4034                &(h->reply_pool_dhandle));
4035
4036        /* Need a block fetch table for performant mode */
4037        h->blockFetchTable = kmalloc(((h->maxsgentries+1) *
4038                sizeof(__u32)), GFP_KERNEL);
4039
4040        if ((h->reply_pool == NULL) || (h->blockFetchTable == NULL))
4041                goto clean_up;
4042
4043        cciss_enter_performant_mode(h,
4044                trans_support & CFGTBL_Trans_use_short_tags);
4045
4046        /* Change the access methods to the performant access methods */
4047        h->access = SA5_performant_access;
4048        h->transMethod = CFGTBL_Trans_Performant;
4049
4050        return;
4051clean_up:
4052        kfree(h->blockFetchTable);
4053        if (h->reply_pool)
4054                pci_free_consistent(h->pdev,
4055                                h->max_commands * sizeof(__u64),
4056                                h->reply_pool,
4057                                h->reply_pool_dhandle);
4058        return;
4059
4060} /* cciss_put_controller_into_performant_mode */
4061
4062/* If MSI/MSI-X is supported by the kernel we will try to enable it on
4063 * controllers that are capable. If not, we use IO-APIC mode.
4064 */
4065
4066static void __devinit cciss_interrupt_mode(ctlr_info_t *h)
4067{
4068#ifdef CONFIG_PCI_MSI
4069        int err;
4070        struct msix_entry cciss_msix_entries[4] = { {0, 0}, {0, 1},
4071        {0, 2}, {0, 3}
4072        };
4073
4074        /* Some boards advertise MSI but don't really support it */
4075        if ((h->board_id == 0x40700E11) || (h->board_id == 0x40800E11) ||
4076            (h->board_id == 0x40820E11) || (h->board_id == 0x40830E11))
4077                goto default_int_mode;
4078
4079        if (pci_find_capability(h->pdev, PCI_CAP_ID_MSIX)) {
4080                err = pci_enable_msix(h->pdev, cciss_msix_entries, 4);
4081                if (!err) {
4082                        h->intr[0] = cciss_msix_entries[0].vector;
4083                        h->intr[1] = cciss_msix_entries[1].vector;
4084                        h->intr[2] = cciss_msix_entries[2].vector;
4085                        h->intr[3] = cciss_msix_entries[3].vector;
4086                        h->msix_vector = 1;
4087                        return;
4088                }
4089                if (err > 0) {
4090                        dev_warn(&h->pdev->dev,
4091                                "only %d MSI-X vectors available\n", err);
4092                        goto default_int_mode;
4093                } else {
4094                        dev_warn(&h->pdev->dev,
4095                                "MSI-X init failed %d\n", err);
4096                        goto default_int_mode;
4097                }
4098        }
4099        if (pci_find_capability(h->pdev, PCI_CAP_ID_MSI)) {
4100                if (!pci_enable_msi(h->pdev))
4101                        h->msi_vector = 1;
4102                else
4103                        dev_warn(&h->pdev->dev, "MSI init failed\n");
4104        }
4105default_int_mode:
4106#endif                          /* CONFIG_PCI_MSI */
4107        /* if we get here we're going to use the default interrupt mode */
4108        h->intr[h->intr_mode] = h->pdev->irq;
4109        return;
4110}
4111
4112static int __devinit cciss_lookup_board_id(struct pci_dev *pdev, u32 *board_id)
4113{
4114        int i;
4115        u32 subsystem_vendor_id, subsystem_device_id;
4116
4117        subsystem_vendor_id = pdev->subsystem_vendor;
4118        subsystem_device_id = pdev->subsystem_device;
4119        *board_id = ((subsystem_device_id << 16) & 0xffff0000) |
4120                        subsystem_vendor_id;
4121
4122        for (i = 0; i < ARRAY_SIZE(products); i++)
4123                if (*board_id == products[i].board_id)
4124                        return i;
4125        dev_warn(&pdev->dev, "unrecognized board ID: 0x%08x, ignoring.\n",
4126                *board_id);
4127        return -ENODEV;
4128}
4129
4130static inline bool cciss_board_disabled(ctlr_info_t *h)
4131{
4132        u16 command;
4133
4134        (void) pci_read_config_word(h->pdev, PCI_COMMAND, &command);
4135        return ((command & PCI_COMMAND_MEMORY) == 0);
4136}
4137
4138static int __devinit cciss_pci_find_memory_BAR(struct pci_dev *pdev,
4139        unsigned long *memory_bar)
4140{
4141        int i;
4142
4143        for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
4144                if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) {
4145                        /* addressing mode bits already removed */
4146                        *memory_bar = pci_resource_start(pdev, i);
4147                        dev_dbg(&pdev->dev, "memory BAR = %lx\n",
4148                                *memory_bar);
4149                        return 0;
4150                }
4151        dev_warn(&pdev->dev, "no memory BAR found\n");
4152        return -ENODEV;
4153}
4154
4155static int __devinit cciss_wait_for_board_state(struct pci_dev *pdev,
4156        void __iomem *vaddr, int wait_for_ready)
4157#define BOARD_READY 1
4158#define BOARD_NOT_READY 0
4159{
4160        int i, iterations;
4161        u32 scratchpad;
4162
4163        if (wait_for_ready)
4164                iterations = CCISS_BOARD_READY_ITERATIONS;
4165        else
4166                iterations = CCISS_BOARD_NOT_READY_ITERATIONS;
4167
4168        for (i = 0; i < iterations; i++) {
4169                scratchpad = readl(vaddr + SA5_SCRATCHPAD_OFFSET);
4170                if (wait_for_ready) {
4171                        if (scratchpad == CCISS_FIRMWARE_READY)
4172                                return 0;
4173                } else {
4174                        if (scratchpad != CCISS_FIRMWARE_READY)
4175                                return 0;
4176                }
4177                msleep(CCISS_BOARD_READY_POLL_INTERVAL_MSECS);
4178        }
4179        dev_warn(&pdev->dev, "board not ready, timed out.\n");
4180        return -ENODEV;
4181}
4182
4183static int __devinit cciss_find_cfg_addrs(struct pci_dev *pdev,
4184        void __iomem *vaddr, u32 *cfg_base_addr, u64 *cfg_base_addr_index,
4185        u64 *cfg_offset)
4186{
4187        *cfg_base_addr = readl(vaddr + SA5_CTCFG_OFFSET);
4188        *cfg_offset = readl(vaddr + SA5_CTMEM_OFFSET);
4189        *cfg_base_addr &= (u32) 0x0000ffff;
4190        *cfg_base_addr_index = find_PCI_BAR_index(pdev, *cfg_base_addr);
4191        if (*cfg_base_addr_index == -1) {
4192                dev_warn(&pdev->dev, "cannot find cfg_base_addr_index, "
4193                        "*cfg_base_addr = 0x%08x\n", *cfg_base_addr);
4194                return -ENODEV;
4195        }
4196        return 0;
4197}
4198
4199static int __devinit cciss_find_cfgtables(ctlr_info_t *h)
4200{
4201        u64 cfg_offset;
4202        u32 cfg_base_addr;
4203        u64 cfg_base_addr_index;
4204        u32 trans_offset;
4205        int rc;
4206
4207        rc = cciss_find_cfg_addrs(h->pdev, h->vaddr, &cfg_base_addr,
4208                &cfg_base_addr_index, &cfg_offset);
4209        if (rc)
4210                return rc;
4211        h->cfgtable = remap_pci_mem(pci_resource_start(h->pdev,
4212                cfg_base_addr_index) + cfg_offset, sizeof(h->cfgtable));
4213        if (!h->cfgtable)
4214                return -ENOMEM;
4215        rc = write_driver_ver_to_cfgtable(h->cfgtable);
4216        if (rc)
4217                return rc;
4218        /* Find performant mode table. */
4219        trans_offset = readl(&h->cfgtable->TransMethodOffset);
4220        h->transtable = remap_pci_mem(pci_resource_start(h->pdev,
4221                                cfg_base_addr_index)+cfg_offset+trans_offset,
4222                                sizeof(*h->transtable));
4223        if (!h->transtable)
4224                return -ENOMEM;
4225        return 0;
4226}
4227
4228static void __devinit cciss_get_max_perf_mode_cmds(struct ctlr_info *h)
4229{
4230        h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands));
4231
4232        /* Limit commands in memory limited kdump scenario. */
4233        if (reset_devices && h->max_commands > 32)
4234                h->max_commands = 32;
4235
4236        if (h->max_commands < 16) {
4237                dev_warn(&h->pdev->dev, "Controller reports "
4238                        "max supported commands of %d, an obvious lie. "
4239                        "Using 16.  Ensure that firmware is up to date.\n",
4240                        h->max_commands);
4241                h->max_commands = 16;
4242        }
4243}
4244
4245/* Interrogate the hardware for some limits:
4246 * max commands, max SG elements without chaining, and with chaining,
4247 * SG chain block size, etc.
4248 */
4249static void __devinit cciss_find_board_params(ctlr_info_t *h)
4250{
4251        cciss_get_max_perf_mode_cmds(h);
4252        h->nr_cmds = h->max_commands - 4 - cciss_tape_cmds;
4253        h->maxsgentries = readl(&(h->cfgtable->MaxSGElements));
4254        /*
4255         * Limit in-command s/g elements to 32 save dma'able memory.
4256         * Howvever spec says if 0, use 31
4257         */
4258        h->max_cmd_sgentries = 31;
4259        if (h->maxsgentries > 512) {
4260                h->max_cmd_sgentries = 32;
4261                h->chainsize = h->maxsgentries - h->max_cmd_sgentries + 1;
4262                h->maxsgentries--; /* save one for chain pointer */
4263        } else {
4264                h->maxsgentries = 31; /* default to traditional values */
4265                h->chainsize = 0;
4266        }
4267}
4268
4269static inline bool CISS_signature_present(ctlr_info_t *h)
4270{
4271        if ((readb(&h->cfgtable->Signature[0]) != 'C') ||
4272            (readb(&h->cfgtable->Signature[1]) != 'I') ||
4273            (readb(&h->cfgtable->Signature[2]) != 'S') ||
4274            (readb(&h->cfgtable->Signature[3]) != 'S')) {
4275                dev_warn(&h->pdev->dev, "not a valid CISS config table\n");
4276                return false;
4277        }
4278        return true;
4279}
4280
4281/* Need to enable prefetch in the SCSI core for 6400 in x86 */
4282static inline void cciss_enable_scsi_prefetch(ctlr_info_t *h)
4283{
4284#ifdef CONFIG_X86
4285        u32 prefetch;
4286
4287        prefetch = readl(&(h->cfgtable->SCSI_Prefetch));
4288        prefetch |= 0x100;
4289        writel(prefetch, &(h->cfgtable->SCSI_Prefetch));
4290#endif
4291}
4292
4293/* Disable DMA prefetch for the P600.  Otherwise an ASIC bug may result
4294 * in a prefetch beyond physical memory.
4295 */
4296static inline void cciss_p600_dma_prefetch_quirk(ctlr_info_t *h)
4297{
4298        u32 dma_prefetch;
4299        __u32 dma_refetch;
4300
4301        if (h->board_id != 0x3225103C)
4302                return;
4303        dma_prefetch = readl(h->vaddr + I2O_DMA1_CFG);
4304        dma_prefetch |= 0x8000;
4305        writel(dma_prefetch, h->vaddr + I2O_DMA1_CFG);
4306        pci_read_config_dword(h->pdev, PCI_COMMAND_PARITY, &dma_refetch);
4307        dma_refetch |= 0x1;
4308        pci_write_config_dword(h->pdev, PCI_COMMAND_PARITY, dma_refetch);
4309}
4310
4311static int __devinit cciss_pci_init(ctlr_info_t *h)
4312{
4313        int prod_index, err;
4314
4315        prod_index = cciss_lookup_board_id(h->pdev, &h->board_id);
4316        if (prod_index < 0)
4317                return -ENODEV;
4318        h->product_name = products[prod_index].product_name;
4319        h->access = *(products[prod_index].access);
4320
4321        if (cciss_board_disabled(h)) {
4322                dev_warn(&h->pdev->dev, "controller appears to be disabled\n");
4323                return -ENODEV;
4324        }
4325
4326        pci_disable_link_state(h->pdev, PCIE_LINK_STATE_L0S |
4327                                PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_CLKPM);
4328
4329        err = pci_enable_device(h->pdev);
4330        if (err) {
4331                dev_warn(&h->pdev->dev, "Unable to Enable PCI device\n");
4332                return err;
4333        }
4334
4335        err = pci_request_regions(h->pdev, "cciss");
4336        if (err) {
4337                dev_warn(&h->pdev->dev,
4338                        "Cannot obtain PCI resources, aborting\n");
4339                return err;
4340        }
4341
4342        dev_dbg(&h->pdev->dev, "irq = %x\n", h->pdev->irq);
4343        dev_dbg(&h->pdev->dev, "board_id = %x\n", h->board_id);
4344
4345/* If the kernel supports MSI/MSI-X we will try to enable that functionality,
4346 * else we use the IO-APIC interrupt assigned to us by system ROM.
4347 */
4348        cciss_interrupt_mode(h);
4349        err = cciss_pci_find_memory_BAR(h->pdev, &h->paddr);
4350        if (err)
4351                goto err_out_free_res;
4352        h->vaddr = remap_pci_mem(h->paddr, 0x250);
4353        if (!h->vaddr) {
4354                err = -ENOMEM;
4355                goto err_out_free_res;
4356        }
4357        err = cciss_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY);
4358        if (err)
4359                goto err_out_free_res;
4360        err = cciss_find_cfgtables(h);
4361        if (err)
4362                goto err_out_free_res;
4363        print_cfg_table(h);
4364        cciss_find_board_params(h);
4365
4366        if (!CISS_signature_present(h)) {
4367                err = -ENODEV;
4368                goto err_out_free_res;
4369        }
4370        cciss_enable_scsi_prefetch(h);
4371        cciss_p600_dma_prefetch_quirk(h);
4372        err = cciss_enter_simple_mode(h);
4373        if (err)
4374                goto err_out_free_res;
4375        cciss_put_controller_into_performant_mode(h);
4376        return 0;
4377
4378err_out_free_res:
4379        /*
4380         * Deliberately omit pci_disable_device(): it does something nasty to
4381         * Smart Array controllers that pci_enable_device does not undo
4382         */
4383        if (h->transtable)
4384                iounmap(h->transtable);
4385        if (h->cfgtable)
4386                iounmap(h->cfgtable);
4387        if (h->vaddr)
4388                iounmap(h->vaddr);
4389        pci_release_regions(h->pdev);
4390        return err;
4391}
4392
4393/* Function to find the first free pointer into our hba[] array
4394 * Returns -1 if no free entries are left.
4395 */
4396static int alloc_cciss_hba(struct pci_dev *pdev)
4397{
4398        int i;
4399
4400        for (i = 0; i < MAX_CTLR; i++) {
4401                if (!hba[i]) {
4402                        ctlr_info_t *h;
4403
4404                        h = kzalloc(sizeof(ctlr_info_t), GFP_KERNEL);
4405                        if (!h)
4406                                goto Enomem;
4407                        hba[i] = h;
4408                        return i;
4409                }
4410        }
4411        dev_warn(&pdev->dev, "This driver supports a maximum"
4412               " of %d controllers.\n", MAX_CTLR);
4413        return -1;
4414Enomem:
4415        dev_warn(&pdev->dev, "out of memory.\n");
4416        return -1;
4417}
4418
4419static void free_hba(ctlr_info_t *h)
4420{
4421        int i;
4422
4423        hba[h->ctlr] = NULL;
4424        for (i = 0; i < h->highest_lun + 1; i++)
4425                if (h->gendisk[i] != NULL)
4426                        put_disk(h->gendisk[i]);
4427        kfree(h);
4428}
4429
4430/* Send a message CDB to the firmware. */
4431static __devinit int cciss_message(struct pci_dev *pdev, unsigned char opcode, unsigned char type)
4432{
4433        typedef struct {
4434                CommandListHeader_struct CommandHeader;
4435                RequestBlock_struct Request;
4436                ErrDescriptor_struct ErrorDescriptor;
4437        } Command;
4438        static const size_t cmd_sz = sizeof(Command) + sizeof(ErrorInfo_struct);
4439        Command *cmd;
4440        dma_addr_t paddr64;
4441        uint32_t paddr32, tag;
4442        void __iomem *vaddr;
4443        int i, err;
4444
4445        vaddr = ioremap_nocache(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
4446        if (vaddr == NULL)
4447                return -ENOMEM;
4448
4449        /* The Inbound Post Queue only accepts 32-bit physical addresses for the
4450           CCISS commands, so they must be allocated from the lower 4GiB of
4451           memory. */
4452        err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
4453        if (err) {
4454                iounmap(vaddr);
4455                return -ENOMEM;
4456        }
4457
4458        cmd = pci_alloc_consistent(pdev, cmd_sz, &paddr64);
4459        if (cmd == NULL) {
4460                iounmap(vaddr);
4461                return -ENOMEM;
4462        }
4463
4464        /* This must fit, because of the 32-bit consistent DMA mask.  Also,
4465           although there's no guarantee, we assume that the address is at
4466           least 4-byte aligned (most likely, it's page-aligned). */
4467        paddr32 = paddr64;
4468
4469        cmd->CommandHeader.ReplyQueue = 0;
4470        cmd->CommandHeader.SGList = 0;
4471        cmd->CommandHeader.SGTotal = 0;
4472        cmd->CommandHeader.Tag.lower = paddr32;
4473        cmd->CommandHeader.Tag.upper = 0;
4474        memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8);
4475
4476        cmd->Request.CDBLen = 16;
4477        cmd->Request.Type.Type = TYPE_MSG;
4478        cmd->Request.Type.Attribute = ATTR_HEADOFQUEUE;
4479        cmd->Request.Type.Direction = XFER_NONE;
4480        cmd->Request.Timeout = 0; /* Don't time out */
4481        cmd->Request.CDB[0] = opcode;
4482        cmd->Request.CDB[1] = type;
4483        memset(&cmd->Request.CDB[2], 0, 14); /* the rest of the CDB is reserved */
4484
4485        cmd->ErrorDescriptor.Addr.lower = paddr32 + sizeof(Command);
4486        cmd->ErrorDescriptor.Addr.upper = 0;
4487        cmd->ErrorDescriptor.Len = sizeof(ErrorInfo_struct);
4488
4489        writel(paddr32, vaddr + SA5_REQUEST_PORT_OFFSET);
4490
4491        for (i = 0; i < 10; i++) {
4492                tag = readl(vaddr + SA5_REPLY_PORT_OFFSET);
4493                if ((tag & ~3) == paddr32)
4494                        break;
4495                msleep(CCISS_POST_RESET_NOOP_TIMEOUT_MSECS);
4496        }
4497
4498        iounmap(vaddr);
4499
4500        /* we leak the DMA buffer here ... no choice since the controller could
4501           still complete the command. */
4502        if (i == 10) {
4503                dev_err(&pdev->dev,
4504                        "controller message %02x:%02x timed out\n",
4505                        opcode, type);
4506                return -ETIMEDOUT;
4507        }
4508
4509        pci_free_consistent(pdev, cmd_sz, cmd, paddr64);
4510
4511        if (tag & 2) {
4512                dev_err(&pdev->dev, "controller message %02x:%02x failed\n",
4513                        opcode, type);
4514                return -EIO;
4515        }
4516
4517        dev_info(&pdev->dev, "controller message %02x:%02x succeeded\n",
4518                opcode, type);
4519        return 0;
4520}
4521
4522#define cciss_noop(p) cciss_message(p, 3, 0)
4523
4524static int cciss_controller_hard_reset(struct pci_dev *pdev,
4525        void * __iomem vaddr, u32 use_doorbell)
4526{
4527        u16 pmcsr;
4528        int pos;
4529
4530        if (use_doorbell) {
4531                /* For everything after the P600, the PCI power state method
4532                 * of resetting the controller doesn't work, so we have this
4533                 * other way using the doorbell register.
4534                 */
4535                dev_info(&pdev->dev, "using doorbell to reset controller\n");
4536                writel(use_doorbell, vaddr + SA5_DOORBELL);
4537        } else { /* Try to do it the PCI power state way */
4538
4539                /* Quoting from the Open CISS Specification: "The Power
4540                 * Management Control/Status Register (CSR) controls the power
4541                 * state of the device.  The normal operating state is D0,
4542                 * CSR=00h.  The software off state is D3, CSR=03h.  To reset
4543                 * the controller, place the interface device in D3 then to D0,
4544                 * this causes a secondary PCI reset which will reset the
4545                 * controller." */
4546
4547                pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
4548                if (pos == 0) {
4549                        dev_err(&pdev->dev,
4550                                "cciss_controller_hard_reset: "
4551                                "PCI PM not supported\n");
4552                        return -ENODEV;
4553                }
4554                dev_info(&pdev->dev, "using PCI PM to reset controller\n");
4555                /* enter the D3hot power management state */
4556                pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr);
4557                pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
4558                pmcsr |= PCI_D3hot;
4559                pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
4560
4561                msleep(500);
4562
4563                /* enter the D0 power management state */
4564                pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
4565                pmcsr |= PCI_D0;
4566                pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
4567
4568                /*
4569                 * The P600 requires a small delay when changing states.
4570                 * Otherwise we may think the board did not reset and we bail.
4571                 * This for kdump only and is particular to the P600.
4572                 */
4573                msleep(500);
4574        }
4575        return 0;
4576}
4577
4578static __devinit void init_driver_version(char *driver_version, int len)
4579{
4580        memset(driver_version, 0, len);
4581        strncpy(driver_version, "cciss " DRIVER_NAME, len - 1);
4582}
4583
4584static __devinit int write_driver_ver_to_cfgtable(
4585        CfgTable_struct __iomem *cfgtable)
4586{
4587        char *driver_version;
4588        int i, size = sizeof(cfgtable->driver_version);
4589
4590        driver_version = kmalloc(size, GFP_KERNEL);
4591        if (!driver_version)
4592                return -ENOMEM;
4593
4594        init_driver_version(driver_version, size);
4595        for (i = 0; i < size; i++)
4596                writeb(driver_version[i], &cfgtable->driver_version[i]);
4597        kfree(driver_version);
4598        return 0;
4599}
4600
4601static __devinit void read_driver_ver_from_cfgtable(
4602        CfgTable_struct __iomem *cfgtable, unsigned char *driver_ver)
4603{
4604        int i;
4605
4606        for (i = 0; i < sizeof(cfgtable->driver_version); i++)
4607                driver_ver[i] = readb(&cfgtable->driver_version[i]);
4608}
4609
4610static __devinit int controller_reset_failed(
4611        CfgTable_struct __iomem *cfgtable)
4612{
4613
4614        char *driver_ver, *old_driver_ver;
4615        int rc, size = sizeof(cfgtable->driver_version);
4616
4617        old_driver_ver = kmalloc(2 * size, GFP_KERNEL);
4618        if (!old_driver_ver)
4619                return -ENOMEM;
4620        driver_ver = old_driver_ver + size;
4621
4622        /* After a reset, the 32 bytes of "driver version" in the cfgtable
4623         * should have been changed, otherwise we know the reset failed.
4624         */
4625        init_driver_version(old_driver_ver, size);
4626        read_driver_ver_from_cfgtable(cfgtable, driver_ver);
4627        rc = !memcmp(driver_ver, old_driver_ver, size);
4628        kfree(old_driver_ver);
4629        return rc;
4630}
4631
4632/* This does a hard reset of the controller using PCI power management
4633 * states or using the doorbell register. */
4634static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev)
4635{
4636        u64 cfg_offset;
4637        u32 cfg_base_addr;
4638        u64 cfg_base_addr_index;
4639        void __iomem *vaddr;
4640        unsigned long paddr;
4641        u32 misc_fw_support;
4642        int rc;
4643        CfgTable_struct __iomem *cfgtable;
4644        u32 use_doorbell;
4645        u32 board_id;
4646        u16 command_register;
4647
4648        /* For controllers as old a the p600, this is very nearly
4649         * the same thing as
4650         *
4651         * pci_save_state(pci_dev);
4652         * pci_set_power_state(pci_dev, PCI_D3hot);
4653         * pci_set_power_state(pci_dev, PCI_D0);
4654         * pci_restore_state(pci_dev);
4655         *
4656         * For controllers newer than the P600, the pci power state
4657         * method of resetting doesn't work so we have another way
4658         * using the doorbell register.
4659         */
4660
4661        /* Exclude 640x boards.  These are two pci devices in one slot
4662         * which share a battery backed cache module.  One controls the
4663         * cache, the other accesses the cache through the one that controls
4664         * it.  If we reset the one controlling the cache, the other will
4665         * likely not be happy.  Just forbid resetting this conjoined mess.
4666         */
4667        cciss_lookup_board_id(pdev, &board_id);
4668        if (!ctlr_is_resettable(board_id)) {
4669                dev_warn(&pdev->dev, "Cannot reset Smart Array 640x "
4670                                "due to shared cache module.");
4671                return -ENODEV;
4672        }
4673
4674        /* if controller is soft- but not hard resettable... */
4675        if (!ctlr_is_hard_resettable(board_id))
4676                return -ENOTSUPP; /* try soft reset later. */
4677
4678        /* Save the PCI command register */
4679        pci_read_config_word(pdev, 4, &command_register);
4680        /* Turn the board off.  This is so that later pci_restore_state()
4681         * won't turn the board on before the rest of config space is ready.
4682         */
4683        pci_disable_device(pdev);
4684        pci_save_state(pdev);
4685
4686        /* find the first memory BAR, so we can find the cfg table */
4687        rc = cciss_pci_find_memory_BAR(pdev, &paddr);
4688        if (rc)
4689                return rc;
4690        vaddr = remap_pci_mem(paddr, 0x250);
4691        if (!vaddr)
4692                return -ENOMEM;
4693
4694        /* find cfgtable in order to check if reset via doorbell is supported */
4695        rc = cciss_find_cfg_addrs(pdev, vaddr, &cfg_base_addr,
4696                                        &cfg_base_addr_index, &cfg_offset);
4697        if (rc)
4698                goto unmap_vaddr;
4699        cfgtable = remap_pci_mem(pci_resource_start(pdev,
4700                       cfg_base_addr_index) + cfg_offset, sizeof(*cfgtable));
4701        if (!cfgtable) {
4702                rc = -ENOMEM;
4703                goto unmap_vaddr;
4704        }
4705        rc = write_driver_ver_to_cfgtable(cfgtable);
4706        if (rc)
4707                goto unmap_vaddr;
4708
4709        /* If reset via doorbell register is supported, use that.
4710         * There are two such methods.  Favor the newest method.
4711         */
4712        misc_fw_support = readl(&cfgtable->misc_fw_support);
4713        use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET2;
4714        if (use_doorbell) {
4715                use_doorbell = DOORBELL_CTLR_RESET2;
4716        } else {
4717                use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET;
4718                if (use_doorbell) {
4719                        dev_warn(&pdev->dev, "Controller claims that "
4720                                "'Bit 2 doorbell reset' is "
4721                                "supported, but not 'bit 5 doorbell reset'.  "
4722                                "Firmware update is recommended.\n");
4723                        rc = -ENOTSUPP; /* use the soft reset */
4724                        goto unmap_cfgtable;
4725                }
4726        }
4727
4728        rc = cciss_controller_hard_reset(pdev, vaddr, use_doorbell);
4729        if (rc)
4730                goto unmap_cfgtable;
4731        pci_restore_state(pdev);
4732        rc = pci_enable_device(pdev);
4733        if (rc) {
4734                dev_warn(&pdev->dev, "failed to enable device.\n");
4735                goto unmap_cfgtable;
4736        }
4737        pci_write_config_word(pdev, 4, command_register);
4738
4739        /* Some devices (notably the HP Smart Array 5i Controller)
4740           need a little pause here */
4741        msleep(CCISS_POST_RESET_PAUSE_MSECS);
4742
4743        /* Wait for board to become not ready, then ready. */
4744        dev_info(&pdev->dev, "Waiting for board to reset.\n");
4745        rc = cciss_wait_for_board_state(pdev, vaddr, BOARD_NOT_READY);
4746        if (rc) {
4747                dev_warn(&pdev->dev, "Failed waiting for board to hard reset."
4748                                "  Will try soft reset.\n");
4749                rc = -ENOTSUPP; /* Not expected, but try soft reset later */
4750                goto unmap_cfgtable;
4751        }
4752        rc = cciss_wait_for_board_state(pdev, vaddr, BOARD_READY);
4753        if (rc) {
4754                dev_warn(&pdev->dev,
4755                        "failed waiting for board to become ready "
4756                        "after hard reset\n");
4757                goto unmap_cfgtable;
4758        }
4759
4760        rc = controller_reset_failed(vaddr);
4761        if (rc < 0)
4762                goto unmap_cfgtable;
4763        if (rc) {
4764                dev_warn(&pdev->dev, "Unable to successfully hard reset "
4765                        "controller. Will try soft reset.\n");
4766                rc = -ENOTSUPP; /* Not expected, but try soft reset later */
4767        } else {
4768                dev_info(&pdev->dev, "Board ready after hard reset.\n");
4769        }
4770
4771unmap_cfgtable:
4772        iounmap(cfgtable);
4773
4774unmap_vaddr:
4775        iounmap(vaddr);
4776        return rc;
4777}
4778
4779static __devinit int cciss_init_reset_devices(struct pci_dev *pdev)
4780{
4781        int rc, i;
4782
4783        if (!reset_devices)
4784                return 0;
4785
4786        /* Reset the controller with a PCI power-cycle or via doorbell */
4787        rc = cciss_kdump_hard_reset_controller(pdev);
4788
4789        /* -ENOTSUPP here means we cannot reset the controller
4790         * but it's already (and still) up and running in
4791         * "performant mode".  Or, it might be 640x, which can't reset
4792         * due to concerns about shared bbwc between 6402/6404 pair.
4793         */
4794        if (rc == -ENOTSUPP)
4795                return rc; /* just try to do the kdump anyhow. */
4796        if (rc)
4797                return -ENODEV;
4798
4799        /* Now try to get the controller to respond to a no-op */
4800        dev_warn(&pdev->dev, "Waiting for controller to respond to no-op\n");
4801        for (i = 0; i < CCISS_POST_RESET_NOOP_RETRIES; i++) {
4802                if (cciss_noop(pdev) == 0)
4803                        break;
4804                else
4805                        dev_warn(&pdev->dev, "no-op failed%s\n",
4806                                (i < CCISS_POST_RESET_NOOP_RETRIES - 1 ?
4807                                        "; re-trying" : ""));
4808                msleep(CCISS_POST_RESET_NOOP_INTERVAL_MSECS);
4809        }
4810        return 0;
4811}
4812
4813static __devinit int cciss_allocate_cmd_pool(ctlr_info_t *h)
4814{
4815        h->cmd_pool_bits = kmalloc(
4816                DIV_ROUND_UP(h->nr_cmds, BITS_PER_LONG) *
4817                sizeof(unsigned long), GFP_KERNEL);
4818        h->cmd_pool = pci_alloc_consistent(h->pdev,
4819                h->nr_cmds * sizeof(CommandList_struct),
4820                &(h->cmd_pool_dhandle));
4821        h->errinfo_pool = pci_alloc_consistent(h->pdev,
4822                h->nr_cmds * sizeof(ErrorInfo_struct),
4823                &(h->errinfo_pool_dhandle));
4824        if ((h->cmd_pool_bits == NULL)
4825                || (h->cmd_pool == NULL)
4826                || (h->errinfo_pool == NULL)) {
4827                dev_err(&h->pdev->dev, "out of memory");
4828                return -ENOMEM;
4829        }
4830        return 0;
4831}
4832
4833static __devinit int cciss_allocate_scatterlists(ctlr_info_t *h)
4834{
4835        int i;
4836
4837        /* zero it, so that on free we need not know how many were alloc'ed */
4838        h->scatter_list = kzalloc(h->max_commands *
4839                                sizeof(struct scatterlist *), GFP_KERNEL);
4840        if (!h->scatter_list)
4841                return -ENOMEM;
4842
4843        for (i = 0; i < h->nr_cmds; i++) {
4844                h->scatter_list[i] = kmalloc(sizeof(struct scatterlist) *
4845                                                h->maxsgentries, GFP_KERNEL);
4846                if (h->scatter_list[i] == NULL) {
4847                        dev_err(&h->pdev->dev, "could not allocate "
4848                                "s/g lists\n");
4849                        return -ENOMEM;
4850                }
4851        }
4852        return 0;
4853}
4854
4855static void cciss_free_scatterlists(ctlr_info_t *h)
4856{
4857        int i;
4858
4859        if (h->scatter_list) {
4860                for (i = 0; i < h->nr_cmds; i++)
4861                        kfree(h->scatter_list[i]);
4862                kfree(h->scatter_list);
4863        }
4864}
4865
4866static void cciss_free_cmd_pool(ctlr_info_t *h)
4867{
4868        kfree(h->cmd_pool_bits);
4869        if (h->cmd_pool)
4870                pci_free_consistent(h->pdev,
4871                        h->nr_cmds * sizeof(CommandList_struct),
4872                        h->cmd_pool, h->cmd_pool_dhandle);
4873        if (h->errinfo_pool)
4874                pci_free_consistent(h->pdev,
4875                        h->nr_cmds * sizeof(ErrorInfo_struct),
4876                        h->errinfo_pool, h->errinfo_pool_dhandle);
4877}
4878
4879static int cciss_request_irq(ctlr_info_t *h,
4880        irqreturn_t (*msixhandler)(int, void *),
4881        irqreturn_t (*intxhandler)(int, void *))
4882{
4883        if (h->msix_vector || h->msi_vector) {
4884                if (!request_irq(h->intr[h->intr_mode], msixhandler,
4885                                0, h->devname, h))
4886                        return 0;
4887                dev_err(&h->pdev->dev, "Unable to get msi irq %d"
4888                        " for %s\n", h->intr[h->intr_mode],
4889                        h->devname);
4890                return -1;
4891        }
4892
4893        if (!request_irq(h->intr[h->intr_mode], intxhandler,
4894                        IRQF_SHARED, h->devname, h))
4895                return 0;
4896        dev_err(&h->pdev->dev, "Unable to get irq %d for %s\n",
4897                h->intr[h->intr_mode], h->devname);
4898        return -1;
4899}
4900
4901static int __devinit cciss_kdump_soft_reset(ctlr_info_t *h)
4902{
4903        if (cciss_send_reset(h, CTLR_LUNID, CCISS_RESET_TYPE_CONTROLLER)) {
4904                dev_warn(&h->pdev->dev, "Resetting array controller failed.\n");
4905                return -EIO;
4906        }
4907
4908        dev_info(&h->pdev->dev, "Waiting for board to soft reset.\n");
4909        if (cciss_wait_for_board_state(h->pdev, h->vaddr, BOARD_NOT_READY)) {
4910                dev_warn(&h->pdev->dev, "Soft reset had no effect.\n");
4911                return -1;
4912        }
4913
4914        dev_info(&h->pdev->dev, "Board reset, awaiting READY status.\n");
4915        if (cciss_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY)) {
4916                dev_warn(&h->pdev->dev, "Board failed to become ready "
4917                        "after soft reset.\n");
4918                return -1;
4919        }
4920
4921        return 0;
4922}
4923
4924static void cciss_undo_allocations_after_kdump_soft_reset(ctlr_info_t *h)
4925{
4926        int ctlr = h->ctlr;
4927
4928        free_irq(h->intr[h->intr_mode], h);
4929#ifdef CONFIG_PCI_MSI
4930        if (h->msix_vector)
4931                pci_disable_msix(h->pdev);
4932        else if (h->msi_vector)
4933                pci_disable_msi(h->pdev);
4934#endif /* CONFIG_PCI_MSI */
4935        cciss_free_sg_chain_blocks(h->cmd_sg_list, h->nr_cmds);
4936        cciss_free_scatterlists(h);
4937        cciss_free_cmd_pool(h);
4938        kfree(h->blockFetchTable);
4939        if (h->reply_pool)
4940                pci_free_consistent(h->pdev, h->max_commands * sizeof(__u64),
4941                                h->reply_pool, h->reply_pool_dhandle);
4942        if (h->transtable)
4943                iounmap(h->transtable);
4944        if (h->cfgtable)
4945                iounmap(h->cfgtable);
4946        if (h->vaddr)
4947                iounmap(h->vaddr);
4948        unregister_blkdev(h->major, h->devname);
4949        cciss_destroy_hba_sysfs_entry(h);
4950        pci_release_regions(h->pdev);
4951        kfree(h);
4952        hba[ctlr] = NULL;
4953}
4954
4955/*
4956 *  This is it.  Find all the controllers and register them.  I really hate
4957 *  stealing all these major device numbers.
4958 *  returns the number of block devices registered.
4959 */
4960static int __devinit cciss_init_one(struct pci_dev *pdev,
4961                                    const struct pci_device_id *ent)
4962{
4963        int i;
4964        int j = 0;
4965        int rc;
4966        int try_soft_reset = 0;
4967        int dac, return_code;
4968        InquiryData_struct *inq_buff;
4969        ctlr_info_t *h;
4970        unsigned long flags;
4971
4972        rc = cciss_init_reset_devices(pdev);
4973        if (rc) {
4974                if (rc != -ENOTSUPP)
4975                        return rc;
4976                /* If the reset fails in a particular way (it has no way to do
4977                 * a proper hard reset, so returns -ENOTSUPP) we can try to do
4978                 * a soft reset once we get the controller configured up to the
4979                 * point that it can accept a command.
4980                 */
4981                try_soft_reset = 1;
4982                rc = 0;
4983        }
4984
4985reinit_after_soft_reset:
4986
4987        i = alloc_cciss_hba(pdev);
4988        if (i < 0)
4989                return -1;
4990
4991        h = hba[i];
4992        h->pdev = pdev;
4993        h->busy_initializing = 1;
4994        h->intr_mode = cciss_simple_mode ? SIMPLE_MODE_INT : PERF_MODE_INT;
4995        INIT_LIST_HEAD(&h->cmpQ);
4996        INIT_LIST_HEAD(&h->reqQ);
4997        mutex_init(&h->busy_shutting_down);
4998
4999        if (cciss_pci_init(h) != 0)
5000                goto clean_no_release_regions;
5001
5002        sprintf(h->devname, "cciss%d", i);
5003        h->ctlr = i;
5004
5005        if (cciss_tape_cmds < 2)
5006                cciss_tape_cmds = 2;
5007        if (cciss_tape_cmds > 16)
5008                cciss_tape_cmds = 16;
5009
5010        init_completion(&h->scan_wait);
5011
5012        if (cciss_create_hba_sysfs_entry(h))
5013                goto clean0;
5014
5015        /* configure PCI DMA stuff */
5016        if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64)))
5017                dac = 1;
5018        else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))
5019                dac = 0;
5020        else {
5021                dev_err(&h->pdev->dev, "no suitable DMA available\n");
5022                goto clean1;
5023        }
5024
5025        /*
5026         * register with the major number, or get a dynamic major number
5027         * by passing 0 as argument.  This is done for greater than
5028         * 8 controller support.
5029         */
5030        if (i < MAX_CTLR_ORIG)
5031                h->major = COMPAQ_CISS_MAJOR + i;
5032        rc = register_blkdev(h->major, h->devname);
5033        if (rc == -EBUSY || rc == -EINVAL) {
5034                dev_err(&h->pdev->dev,
5035                       "Unable to get major number %d for %s "
5036                       "on hba %d\n", h->major, h->devname, i);
5037                goto clean1;
5038        } else {
5039                if (i >= MAX_CTLR_ORIG)
5040                        h->major = rc;
5041        }
5042
5043        /* make sure the board interrupts are off */
5044        h->access.set_intr_mask(h, CCISS_INTR_OFF);
5045        rc = cciss_request_irq(h, do_cciss_msix_intr, do_cciss_intx);
5046        if (rc)
5047                goto clean2;
5048
5049        dev_info(&h->pdev->dev, "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n",
5050               h->devname, pdev->device, pci_name(pdev),
5051               h->intr[h->intr_mode], dac ? "" : " not");
5052
5053        if (cciss_allocate_cmd_pool(h))
5054                goto clean4;
5055
5056        if (cciss_allocate_scatterlists(h))
5057                goto clean4;
5058
5059        h->cmd_sg_list = cciss_allocate_sg_chain_blocks(h,
5060                h->chainsize, h->nr_cmds);
5061        if (!h->cmd_sg_list && h->chainsize > 0)
5062                goto clean4;
5063
5064        spin_lock_init(&h->lock);
5065
5066        /* Initialize the pdev driver private data.
5067           have it point to h.  */
5068        pci_set_drvdata(pdev, h);
5069        /* command and error info recs zeroed out before
5070           they are used */
5071        memset(h->cmd_pool_bits, 0,
5072               DIV_ROUND_UP(h->nr_cmds, BITS_PER_LONG)
5073                        * sizeof(unsigned long));
5074
5075        h->num_luns = 0;
5076        h->highest_lun = -1;
5077        for (j = 0; j < CISS_MAX_LUN; j++) {
5078                h->drv[j] = NULL;
5079                h->gendisk[j] = NULL;
5080        }
5081
5082        /* At this point, the controller is ready to take commands.
5083         * Now, if reset_devices and the hard reset didn't work, try
5084         * the soft reset and see if that works.
5085         */
5086        if (try_soft_reset) {
5087
5088                /* This is kind of gross.  We may or may not get a completion
5089                 * from the soft reset command, and if we do, then the value
5090                 * from the fifo may or may not be valid.  So, we wait 10 secs
5091                 * after the reset throwing away any completions we get during
5092                 * that time.  Unregister the interrupt handler and register
5093                 * fake ones to scoop up any residual completions.
5094                 */
5095                spin_lock_irqsave(&h->lock, flags);
5096                h->access.set_intr_mask(h, CCISS_INTR_OFF);
5097                spin_unlock_irqrestore(&h->lock, flags);
5098                free_irq(h->intr[h->intr_mode], h);
5099                rc = cciss_request_irq(h, cciss_msix_discard_completions,
5100                                        cciss_intx_discard_completions);
5101                if (rc) {
5102                        dev_warn(&h->pdev->dev, "Failed to request_irq after "
5103                                "soft reset.\n");
5104                        goto clean4;
5105                }
5106
5107                rc = cciss_kdump_soft_reset(h);
5108                if (rc) {
5109                        dev_warn(&h->pdev->dev, "Soft reset failed.\n");
5110                        goto clean4;
5111                }
5112
5113                dev_info(&h->pdev->dev, "Board READY.\n");
5114                dev_info(&h->pdev->dev,
5115                        "Waiting for stale completions to drain.\n");
5116                h->access.set_intr_mask(h, CCISS_INTR_ON);
5117                msleep(10000);
5118                h->access.set_intr_mask(h, CCISS_INTR_OFF);
5119
5120                rc = controller_reset_failed(h->cfgtable);
5121                if (rc)
5122                        dev_info(&h->pdev->dev,
5123                                "Soft reset appears to have failed.\n");
5124
5125                /* since the controller's reset, we have to go back and re-init
5126                 * everything.  Easiest to just forget what we've done and do it
5127                 * all over again.
5128                 */
5129                cciss_undo_allocations_after_kdump_soft_reset(h);
5130                try_soft_reset = 0;
5131                if (rc)
5132                        /* don't go to clean4, we already unallocated */
5133                        return -ENODEV;
5134
5135                goto reinit_after_soft_reset;
5136        }
5137
5138        cciss_scsi_setup(h);
5139
5140        /* Turn the interrupts on so we can service requests */
5141        h->access.set_intr_mask(h, CCISS_INTR_ON);
5142
5143        /* Get the firmware version */
5144        inq_buff = kzalloc(sizeof(InquiryData_struct), GFP_KERNEL);
5145        if (inq_buff == NULL) {
5146                dev_err(&h->pdev->dev, "out of memory\n");
5147                goto clean4;
5148        }
5149
5150        return_code = sendcmd_withirq(h, CISS_INQUIRY, inq_buff,
5151                sizeof(InquiryData_struct), 0, CTLR_LUNID, TYPE_CMD);
5152        if (return_code == IO_OK) {
5153                h->firm_ver[0] = inq_buff->data_byte[32];
5154                h->firm_ver[1] = inq_buff->data_byte[33];
5155                h->firm_ver[2] = inq_buff->data_byte[34];
5156                h->firm_ver[3] = inq_buff->data_byte[35];
5157        } else {         /* send command failed */
5158                dev_warn(&h->pdev->dev, "unable to determine firmware"
5159                        " version of controller\n");
5160        }
5161        kfree(inq_buff);
5162
5163        cciss_procinit(h);
5164
5165        h->cciss_max_sectors = 8192;
5166
5167        rebuild_lun_table(h, 1, 0);
5168        cciss_engage_scsi(h);
5169        h->busy_initializing = 0;
5170        return 1;
5171
5172clean4:
5173        cciss_free_cmd_pool(h);
5174        cciss_free_scatterlists(h);
5175        cciss_free_sg_chain_blocks(h->cmd_sg_list, h->nr_cmds);
5176        free_irq(h->intr[h->intr_mode], h);
5177clean2:
5178        unregister_blkdev(h->major, h->devname);
5179clean1:
5180        cciss_destroy_hba_sysfs_entry(h);
5181clean0:
5182        pci_release_regions(pdev);
5183clean_no_release_regions:
5184        h->busy_initializing = 0;
5185
5186        /*
5187         * Deliberately omit pci_disable_device(): it does something nasty to
5188         * Smart Array controllers that pci_enable_device does not undo
5189         */
5190        pci_set_drvdata(pdev, NULL);
5191        free_hba(h);
5192        return -1;
5193}
5194
5195static void cciss_shutdown(struct pci_dev *pdev)
5196{
5197        ctlr_info_t *h;
5198        char *flush_buf;
5199        int return_code;
5200
5201        h = pci_get_drvdata(pdev);
5202        flush_buf = kzalloc(4, GFP_KERNEL);
5203        if (!flush_buf) {
5204                dev_warn(&h->pdev->dev, "cache not flushed, out of memory.\n");
5205                return;
5206        }
5207        /* write all data in the battery backed cache to disk */
5208        memset(flush_buf, 0, 4);
5209        return_code = sendcmd_withirq(h, CCISS_CACHE_FLUSH, flush_buf,
5210                4, 0, CTLR_LUNID, TYPE_CMD);
5211        kfree(flush_buf);
5212        if (return_code != IO_OK)
5213                dev_warn(&h->pdev->dev, "Error flushing cache\n");
5214        h->access.set_intr_mask(h, CCISS_INTR_OFF);
5215        free_irq(h->intr[h->intr_mode], h);
5216}
5217
5218static int __devinit cciss_enter_simple_mode(struct ctlr_info *h)
5219{
5220        u32 trans_support;
5221
5222        trans_support = readl(&(h->cfgtable->TransportSupport));
5223        if (!(trans_support & SIMPLE_MODE))
5224                return -ENOTSUPP;
5225
5226        h->max_commands = readl(&(h->cfgtable->CmdsOutMax));
5227        writel(CFGTBL_Trans_Simple, &(h->cfgtable->HostWrite.TransportRequest));
5228        writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
5229        cciss_wait_for_mode_change_ack(h);
5230        print_cfg_table(h);
5231        if (!(readl(&(h->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) {
5232                dev_warn(&h->pdev->dev, "unable to get board into simple mode\n");
5233                return -ENODEV;
5234        }
5235        h->transMethod = CFGTBL_Trans_Simple;
5236        return 0;
5237}
5238
5239
5240static void __devexit cciss_remove_one(struct pci_dev *pdev)
5241{
5242        ctlr_info_t *h;
5243        int i, j;
5244
5245        if (pci_get_drvdata(pdev) == NULL) {
5246                dev_err(&pdev->dev, "Unable to remove device\n");
5247                return;
5248        }
5249
5250        h = pci_get_drvdata(pdev);
5251        i = h->ctlr;
5252        if (hba[i] == NULL) {
5253                dev_err(&pdev->dev, "device appears to already be removed\n");
5254                return;
5255        }
5256
5257        mutex_lock(&h->busy_shutting_down);
5258
5259        remove_from_scan_list(h);
5260        remove_proc_entry(h->devname, proc_cciss);
5261        unregister_blkdev(h->major, h->devname);
5262
5263        /* remove it from the disk list */
5264        for (j = 0; j < CISS_MAX_LUN; j++) {
5265                struct gendisk *disk = h->gendisk[j];
5266                if (disk) {
5267                        struct request_queue *q = disk->queue;
5268
5269                        if (disk->flags & GENHD_FL_UP) {
5270                                cciss_destroy_ld_sysfs_entry(h, j, 1);
5271                                del_gendisk(disk);
5272                        }
5273                        if (q)
5274                                blk_cleanup_queue(q);
5275                }
5276        }
5277
5278#ifdef CONFIG_CISS_SCSI_TAPE
5279        cciss_unregister_scsi(h);       /* unhook from SCSI subsystem */
5280#endif
5281
5282        cciss_shutdown(pdev);
5283
5284#ifdef CONFIG_PCI_MSI
5285        if (h->msix_vector)
5286                pci_disable_msix(h->pdev);
5287        else if (h->msi_vector)
5288                pci_disable_msi(h->pdev);
5289#endif                          /* CONFIG_PCI_MSI */
5290
5291        iounmap(h->transtable);
5292        iounmap(h->cfgtable);
5293        iounmap(h->vaddr);
5294
5295        cciss_free_cmd_pool(h);
5296        /* Free up sg elements */
5297        for (j = 0; j < h->nr_cmds; j++)
5298                kfree(h->scatter_list[j]);
5299        kfree(h->scatter_list);
5300        cciss_free_sg_chain_blocks(h->cmd_sg_list, h->nr_cmds);
5301        kfree(h->blockFetchTable);
5302        if (h->reply_pool)
5303                pci_free_consistent(h->pdev, h->max_commands * sizeof(__u64),
5304                                h->reply_pool, h->reply_pool_dhandle);
5305        /*
5306         * Deliberately omit pci_disable_device(): it does something nasty to
5307         * Smart Array controllers that pci_enable_device does not undo
5308         */
5309        pci_release_regions(pdev);
5310        pci_set_drvdata(pdev, NULL);
5311        cciss_destroy_hba_sysfs_entry(h);
5312        mutex_unlock(&h->busy_shutting_down);
5313        free_hba(h);
5314}
5315
5316static struct pci_driver cciss_pci_driver = {
5317        .name = "cciss",
5318        .probe = cciss_init_one,
5319        .remove = __devexit_p(cciss_remove_one),
5320        .id_table = cciss_pci_device_id,        /* id_table */
5321        .shutdown = cciss_shutdown,
5322};
5323
5324/*
5325 *  This is it.  Register the PCI driver information for the cards we control
5326 *  the OS will call our registered routines when it finds one of our cards.
5327 */
5328static int __init cciss_init(void)
5329{
5330        int err;
5331
5332        /*
5333         * The hardware requires that commands are aligned on a 64-bit
5334         * boundary. Given that we use pci_alloc_consistent() to allocate an
5335         * array of them, the size must be a multiple of 8 bytes.
5336         */
5337        BUILD_BUG_ON(sizeof(CommandList_struct) % COMMANDLIST_ALIGNMENT);
5338        printk(KERN_INFO DRIVER_NAME "\n");
5339
5340        err = bus_register(&cciss_bus_type);
5341        if (err)
5342                return err;
5343
5344        /* Start the scan thread */
5345        cciss_scan_thread = kthread_run(scan_thread, NULL, "cciss_scan");
5346        if (IS_ERR(cciss_scan_thread)) {
5347                err = PTR_ERR(cciss_scan_thread);
5348                goto err_bus_unregister;
5349        }
5350
5351        /* Register for our PCI devices */
5352        err = pci_register_driver(&cciss_pci_driver);
5353        if (err)
5354                goto err_thread_stop;
5355
5356        return err;
5357
5358err_thread_stop:
5359        kthread_stop(cciss_scan_thread);
5360err_bus_unregister:
5361        bus_unregister(&cciss_bus_type);
5362
5363        return err;
5364}
5365
5366static void __exit cciss_cleanup(void)
5367{
5368        int i;
5369
5370        pci_unregister_driver(&cciss_pci_driver);
5371        /* double check that all controller entrys have been removed */
5372        for (i = 0; i < MAX_CTLR; i++) {
5373                if (hba[i] != NULL) {
5374                        dev_warn(&hba[i]->pdev->dev,
5375                                "had to remove controller\n");
5376                        cciss_remove_one(hba[i]->pdev);
5377                }
5378        }
5379        kthread_stop(cciss_scan_thread);
5380        if (proc_cciss)
5381                remove_proc_entry("driver/cciss", NULL);
5382        bus_unregister(&cciss_bus_type);
5383}
5384
5385module_init(cciss_init);
5386module_exit(cciss_cleanup);
5387
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.