1/* 2 * Generic RTC interface. 3 * This version contains the part of the user interface to the Real Time Clock 4 * service. It is used with both the legacy mc146818 and also EFI 5 * Struct rtc_time and first 12 ioctl by Paul Gortmaker, 1996 - separated out 6 * from <linux/mc146818rtc.h> to this file for 2.4 kernels. 7 * 8 * Copyright (C) 1999 Hewlett-Packard Co. 9 * Copyright (C) 1999 Stephane Eranian <eranian@hpl.hp.com> 10 */ 11#ifndef _LINUX_RTC_H_ 12#define _LINUX_RTC_H_ 13 14/* 15 * The struct used to pass data via the following ioctl. Similar to the 16 * struct tm in <time.h>, but it needs to be here so that the kernel 17 * source is self contained, allowing cross-compiles, etc. etc. 18 */ 19 20struct rtc_time { 21 int tm_sec; 22 int tm_min; 23 int tm_hour; 24 int tm_mday; 25 int tm_mon; 26 int tm_year; 27 int tm_wday; 28 int tm_yday; 29 int tm_isdst; 30}; 31 32/* 33 * This data structure is inspired by the EFI (v0.92) wakeup 34 * alarm API. 35 */ 36struct rtc_wkalrm { 37 unsigned char enabled; /* 0 = alarm disable, 1 = alarm disabled */ 38 unsigned char pending; /* 0 = alarm pending, 1 = alarm not pending */ 39 struct rtc_time time; /* time the alarm is set to */ 40}; 41 42/* 43 * Data structure to control PLL correction some better RTC feature 44 * pll_value is used to get or set current value of correction, 45 * the rest of the struct is used to query HW capabilities. 46 * This is modeled after the RTC used in Q40/Q60 computers but 47 * should be sufficiently flexible for other devices 48 * 49 * +ve pll_value means clock will run faster by 50 * pll_value*pll_posmult/pll_clock 51 * -ve pll_value means clock will run slower by 52 * pll_value*pll_negmult/pll_clock 53 */ 54 55struct rtc_pll_info { 56 int pll_ctrl; /* placeholder for fancier control */ 57 int pll_value; /* get/set correction value */ 58 int pll_max; /* max +ve (faster) adjustment value */ 59 int pll_min; /* max -ve (slower) adjustment value */ 60 int pll_posmult; /* factor for +ve correction */ 61 int pll_negmult; /* factor for -ve correction */ 62 long pll_clock; /* base PLL frequency */ 63}; 64 65/* 66 * ioctl calls that are permitted to the /dev/rtc interface, if 67 * any of the RTC drivers are enabled. 68 */ 69 70#define RTC_AIE_ON _IO('p', 0x01) /* Alarm int. enable on */ 71#define RTC_AIE_OFF _IO('p', 0x02) /* ... off */ 72#define RTC_UIE_ON _IO('p', 0x03) /* Update int. enable on */ 73#define RTC_UIE_OFF _IO('p', 0x04) /* ... off */ 74#define RTC_PIE_ON _IO('p', 0x05) /* Periodic int. enable on */ 75#define RTC_PIE_OFF _IO('p', 0x06) /* ... off */ 76#define RTC_WIE_ON _IO('p', 0x0f) /* Watchdog int. enable on */ 77#define RTC_WIE_OFF _IO('p', 0x10) /* ... off */ 78 79#define RTC_ALM_SET _IOW('p', 0x07, struct rtc_time) /* Set alarm time */ 80#define RTC_ALM_READ _IOR('p', 0x08, struct rtc_time) /* Read alarm time */ 81#define RTC_RD_TIME _IOR('p', 0x09, struct rtc_time) /* Read RTC time */ 82#define RTC_SET_TIME _IOW('p', 0x0a, struct rtc_time) /* Set RTC time */ 83#define RTC_IRQP_READ _IOR('p', 0x0b, unsigned long) /* Read IRQ rate */ 84#define RTC_IRQP_SET _IOW('p', 0x0c, unsigned long) /* Set IRQ rate */ 85#define RTC_EPOCH_READ _IOR('p', 0x0d, unsigned long) /* Read epoch */ 86#define RTC_EPOCH_SET _IOW('p', 0x0e, unsigned long) /* Set epoch */ 87 88#define RTC_WKALM_SET _IOW('p', 0x0f, struct rtc_wkalrm)/* Set wakeup alarm*/ 89#define RTC_WKALM_RD _IOR('p', 0x10, struct rtc_wkalrm)/* Get wakeup alarm*/ 90 91#define RTC_PLL_GET _IOR('p', 0x11, struct rtc_pll_info) /* Get PLL correction */ 92#define RTC_PLL_SET _IOW('p', 0x12, struct rtc_pll_info) /* Set PLL correction */ 93#endif /* _LINUX_RTC_H_ */ 94