/*
    NetWinder Floating Point Emulator
    (c) Rebel.COM, 1998,1999
    (c) Philip Blundell, 2001

    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/

#ifndef __FPOPCODE_H__
#define __FPOPCODE_H__

/*
ARM Floating Point Instruction Classes
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 
|c o n d|1 1 0 P|U|u|W|L|   Rn  |v|  Fd |0|0|0|1|  o f f s e t  | CPDT
|c o n d|1 1 0 P|U|w|W|L|   Rn  |x|  Fd |0|0|1|0|  o f f s e t  | CPDT (copro 2)
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 
|c o n d|1 1 1 0|a|b|c|d|e|  Fn |j|  Fd |0|0|0|1|f|g|h|0|i|  Fm | CPDO
|c o n d|1 1 1 0|a|b|c|L|e|  Fn |   Rd  |0|0|0|1|f|g|h|1|i|  Fm | CPRT
|c o n d|1 1 1 0|a|b|c|1|e|  Fn |1|1|1|1|0|0|0|1|f|g|h|1|i|  Fm | comparisons
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 

CPDT            data transfer instructions
                LDF, STF, LFM (copro 2), SFM (copro 2)
                
CPDO            dyadic arithmetic instructions
                ADF, MUF, SUF, RSF, DVF, RDF,
                POW, RPW, RMF, FML, FDV, FRD, POL

CPDO            monadic arithmetic instructions
                MVF, MNF, ABS, RND, SQT, LOG, LGN, EXP,
                SIN, COS, TAN, ASN, ACS, ATN, URD, NRM
                
CPRT            joint arithmetic/data transfer instructions
                FIX (arithmetic followed by load/store)
                FLT (load/store followed by arithmetic)
                CMF, CNF CMFE, CNFE (comparisons)
                WFS, RFS (write/read floating point status register)
                WFC, RFC (write/read floating point control register)

cond            condition codes
P               pre/post index bit: 0 = postindex, 1 = preindex
U               up/down bit: 0 = stack grows down, 1 = stack grows up
W               write back bit: 1 = update base register (Rn)
L               load/store bit: 0 = store, 1 = load
Rn              base register
Rd              destination/source register             
Fd              floating point destination register
Fn              floating point source register
Fm              floating point source register or floating point constant

uv              transfer length (TABLE 1)
wx              register count (TABLE 2)
abcd            arithmetic opcode (TABLES 3 & 4)
ef              destination size (rounding precision) (TABLE 5)
gh              rounding mode (TABLE 6)
j               dyadic/monadic bit: 0 = dyadic, 1 = monadic
i               constant bit: 1 = constant (TABLE 6)
*/

/*
TABLE 1
+-------------------------+---+---+---------+---------+
|  Precision              | u | v | FPSR.EP | length  |
+-------------------------+---+---+---------+---------+
| Single                  | 0 ü 0 |    x    | 1 words |
| Double                  | 1 ü 1 |    x    | 2 words |
| Extended                | 1 ü 1 |    x    | 3 words |
| Packed decimal          | 1 ü 1 |    0    | 3 words |
| Expanded packed decimal | 1 ü 1 |    1    | 4 words |
+-------------------------+---+---+---------+---------+
Note: x = don't care
*/

/*
TABLE 2
+---+---+---------------------------------+
| w | x | Number of registers to transfer |
+---+---+---------------------------------+
| 0 ü 1 |  1                              |
| 1 ü 0 |  2                              |
| 1 ü 1 |  3                              |
| 0 ü 0 |  4                              |
+---+---+---------------------------------+
*/

/*
TABLE 3: Dyadic Floating Point Opcodes
+---+---+---+---+----------+-----------------------+-----------------------+
| a | b | c | d | Mnemonic | Description           | Operation             |
+---+---+---+---+----------+-----------------------+-----------------------+
| 0 | 0 | 0 | 0 | ADF      | Add                   | Fd := Fn + Fm         |
| 0 | 0 | 0 | 1 | MUF      | Multiply              | Fd := Fn * Fm         |
| 0 | 0 | 1 | 0 | SUF      | Subtract              | Fd := Fn - Fm         |
| 0 | 0 | 1 | 1 | RSF      | Reverse subtract      | Fd := Fm - Fn         |
| 0 | 1 | 0 | 0 | DVF      | Divide                | Fd := Fn / Fm         |
| 0 | 1 | 0 | 1 | RDF      | Reverse divide        | Fd := Fm / Fn         |
| 0 | 1 | 1 | 0 | POW      | Power                 | Fd := Fn ^ Fm         |
| 0 | 1 | 1 | 1 | RPW      | Reverse power         | Fd := Fm ^ Fn         |
| 1 | 0 | 0 | 0 | RMF      | Remainder             | Fd := IEEE rem(Fn/Fm) |
| 1 | 0 | 0 | 1 | FML      | Fast Multiply         | Fd := Fn * Fm         |
| 1 | 0 | 1 | 0 | FDV      | Fast Divide           | Fd := Fn / Fm         |
| 1 | 0 | 1 | 1 | FRD      | Fast reverse divide   | Fd := Fm / Fn         |
| 1 | 1 | 0 | 0 | POL      | Polar angle (ArcTan2) | Fd := arctan2(Fn,Fm)  |
| 1 | 1 | 0 | 1 |          | undefined instruction | trap                  |
| 1 | 1 | 1 | 0 |          | undefined instruction | trap                  |
| 1 | 1 | 1 | 1 |          | undefined instruction | trap                  |
+---+---+---+---+----------+-----------------------+-----------------------+
Note: POW, RPW, POL are deprecated, and are available for backwards
      compatibility only.
*/

/*
TABLE 4: Monadic Floating Point Opcodes
+---+---+---+---+----------+-----------------------+-----------------------+
| a | b | c | d | Mnemonic | Description           | Operation             |
+---+---+---+---+----------+-----------------------+-----------------------+
| 0 | 0 | 0 | 0 | MVF      | Move                  | Fd := Fm              |
| 0 | 0 | 0 | 1 | MNF      | Move negated          | Fd := - Fm            |
| 0 | 0 | 1 | 0 | ABS      | Absolute value        | Fd := abs(Fm)         |
| 0 | 0 | 1 | 1 | RND      | Round to integer      | Fd := int(Fm)         |
| 0 | 1 | 0 | 0 | SQT      | Square root           | Fd := sqrt(Fm)        |
| 0 | 1 | 0 | 1 | LOG      | Log base 10           | Fd := log10(Fm)       |
| 0 | 1 | 1 | 0 | LGN      | Log base e            | Fd := ln(Fm)          |
| 0 | 1 | 1 | 1 | EXP      | Exponent              | Fd := e ^ Fm          |
| 1 | 0 | 0 | 0 | SIN      | Sine                  | Fd := sin(Fm)         |
| 1 | 0 | 0 | 1 | COS      | Cosine                | Fd := cos(Fm)         |
| 1 | 0 | 1 | 0 | TAN      | Tangent               | Fd := tan(Fm)         |
| 1 | 0 | 1 | 1 | ASN      | Arc Sine              | Fd := arcsin(Fm)      |
| 1 | 1 | 0 | 0 | ACS      | Arc Cosine            | Fd := arccos(Fm)      |
| 1 | 1 | 0 | 1 | ATN      | Arc Tangent           | Fd := arctan(Fm)      |
| 1 | 1 | 1 | 0 | URD      | Unnormalized round    | Fd := int(Fm)         |
| 1 | 1 | 1 | 1 | NRM      | Normalize             | Fd := norm(Fm)        |
+---+---+---+---+----------+-----------------------+-----------------------+
Note: LOG, LGN, EXP, SIN, COS, TAN, ASN, ACS, ATN are deprecated, and are
      available for backwards compatibility only.
*/

/*
TABLE 5
+-------------------------+---+---+
|  Rounding Precision     | e | f |
+-------------------------+---+---+
| IEEE Single precision   | 0 ü 0 |
| IEEE Double precision   | 0 ü 1 |
| IEEE Extended precision | 1 ü 0 |
| undefined (trap)        | 1 ü 1 |
+-------------------------+---+---+
*/

/*
TABLE 5
+---------------------------------+---+---+
|  Rounding Mode                  | g | h |
+---------------------------------+---+---+
| Round to nearest (default)      | 0 ü 0 |
| Round toward plus infinity      | 0 ü 1 |
| Round toward negative infinity  | 1 ü 0 |
| Round toward zero               | 1 ü 1 |
+---------------------------------+---+---+
*/

/*
===
=== Definitions for load and store instructions
===
*/

/* bit masks */
#define BIT_PREINDEX    0x01000000
#define BIT_UP          0x00800000
#define BIT_WRITE_BACK  0x00200000
#define BIT_LOAD        0x00100000

/* masks for load/store */
#define MASK_CPDT               0x0c000000      /* data processing opcode */
#define MASK_OFFSET             0x000000ff
#define MASK_TRANSFER_LENGTH    0x00408000
#define MASK_REGISTER_COUNT     MASK_TRANSFER_LENGTH
#define MASK_COPROCESSOR        0x00000f00

/* Tests for transfer length */
#define TRANSFER_SINGLE         0x00000000
#define TRANSFER_DOUBLE         0x00008000
#define TRANSFER_EXTENDED       0x00400000
#define TRANSFER_PACKED         MASK_TRANSFER_LENGTH

/* Get the coprocessor number from the opcode. */
#define getCoprocessorNumber(opcode)    ((opcode & MASK_COPROCESSOR) >> 8)

/* Get the offset from the opcode. */
#define getOffset(opcode)               (opcode & MASK_OFFSET)

/* Tests for specific data transfer load/store opcodes. */
#define TEST_OPCODE(opcode,mask)        (((opcode) & (mask)) == (mask))

#define LOAD_OP(opcode)   TEST_OPCODE((opcode),MASK_CPDT | BIT_LOAD)
#define STORE_OP(opcode)  ((opcode & (MASK_CPDT | BIT_LOAD)) == MASK_CPDT)

#define LDF_OP(opcode)  (LOAD_OP(opcode) && (getCoprocessorNumber(opcode) == 1))
#define LFM_OP(opcode)  (LOAD_OP(opcode) && (getCoprocessorNumber(opcode) == 2))
#define STF_OP(opcode)  (STORE_OP(opcode) && (getCoprocessorNumber(opcode) == 1))
#define SFM_OP(opcode)  (STORE_OP(opcode) && (getCoprocessorNumber(opcode) == 2))

#define PREINDEXED(opcode)              ((opcode & BIT_PREINDEX) != 0)
#define POSTINDEXED(opcode)             ((opcode & BIT_PREINDEX) == 0)
#define BIT_UP_SET(opcode)              ((opcode & BIT_UP) != 0)
#define BIT_UP_CLEAR(opcode)            ((opcode & BIT_DOWN) == 0)
#define WRITE_BACK(opcode)              ((opcode & BIT_WRITE_BACK) != 0)
#define LOAD(opcode)                    ((opcode & BIT_LOAD) != 0)
#define STORE(opcode)                   ((opcode & BIT_LOAD) == 0)

/*
===
=== Definitions for arithmetic instructions
===
*/
/* bit masks */
#define BIT_MONADIC     0x00008000
#define BIT_CONSTANT    0x00000008

#define CONSTANT_FM(opcode)             ((opcode & BIT_CONSTANT) != 0)
#define MONADIC_INSTRUCTION(opcode)     ((opcode & BIT_MONADIC) != 0)

/* instruction identification masks */
#define MASK_CPDO               0x0e000000      /* arithmetic opcode */
#define MASK_ARITHMETIC_OPCODE  0x00f08000
#define MASK_DESTINATION_SIZE   0x00080080

/* dyadic arithmetic opcodes. */
#define ADF_CODE        0x00000000
#define MUF_CODE        0x00100000
#define SUF_CODE        0x00200000
#define RSF_CODE        0x00300000
#define DVF_CODE        0x00400000
#define RDF_CODE        0x00500000
#define POW_CODE        0x00600000
#define RPW_CODE        0x00700000
#define RMF_CODE        0x00800000
#define FML_CODE        0x00900000
#define FDV_CODE        0x00a00000
#define FRD_CODE        0x00b00000
#define POL_CODE        0x00c00000
/* 0x00d00000 is an invalid dyadic arithmetic opcode */
/* 0x00e00000 is an invalid dyadic arithmetic opcode */
/* 0x00f00000 is an invalid dyadic arithmetic opcode */

/* monadic arithmetic opcodes. */
#define MVF_CODE        0x00008000
#define MNF_CODE        0x00108000
#define ABS_CODE        0x00208000
#define RND_CODE        0x00308000
#define SQT_CODE        0x00408000
#define LOG_CODE        0x00508000
#define LGN_CODE        0x00608000
#define EXP_CODE        0x00708000
#define SIN_CODE        0x00808000
#define COS_CODE        0x00908000
#define TAN_CODE        0x00a08000
#define ASN_CODE        0x00b08000
#define ACS_CODE        0x00c08000
#define ATN_CODE        0x00d08000
#define URD_CODE        0x00e08000
#define NRM_CODE        0x00f08000

/*
===
=== Definitions for register transfer and comparison instructions
===
*/

#define MASK_CPRT               0x0e000010      /* register transfer opcode */
#define MASK_CPRT_CODE          0x00f00000
#define FLT_CODE                0x00000000
#define FIX_CODE                0x00100000
#define WFS_CODE                0x00200000
#define RFS_CODE                0x00300000
#define WFC_CODE                0x00400000
#define RFC_CODE                0x00500000
#define CMF_CODE                0x00900000
#define CNF_CODE                0x00b00000
#define CMFE_CODE               0x00d00000
#define CNFE_CODE               0x00f00000

/*
===
=== Common definitions
===
*/

/* register masks */
#define MASK_Rd         0x0000f000
#define MASK_Rn         0x000f0000
#define MASK_Fd         0x00007000
#define MASK_Fm         0x00000007
#define MASK_Fn         0x00070000

/* condition code masks */
#define CC_MASK         0xf0000000
#define CC_NEGATIVE     0x80000000
#define CC_ZERO         0x40000000
#define CC_CARRY        0x20000000
#define CC_OVERFLOW     0x10000000
#define CC_EQ           0x00000000
#define CC_NE           0x10000000
#define CC_CS           0x20000000
#define CC_HS           CC_CS
#define CC_CC           0x30000000
#define CC_LO           CC_CC
#define CC_MI           0x40000000
#define CC_PL           0x50000000
#define CC_VS           0x60000000
#define CC_VC           0x70000000
#define CC_HI           0x80000000
#define CC_LS           0x90000000
#define CC_GE           0xa0000000
#define CC_LT           0xb0000000
#define CC_GT           0xc0000000
#define CC_LE           0xd0000000
#define CC_AL           0xe0000000
#define CC_NV           0xf0000000

/* rounding masks/values */
#define MASK_ROUNDING_MODE      0x00000060
#define ROUND_TO_NEAREST        0x00000000
#define ROUND_TO_PLUS_INFINITY  0x00000020
#define ROUND_TO_MINUS_INFINITY 0x00000040
#define ROUND_TO_ZERO           0x00000060

#define MASK_ROUNDING_PRECISION 0x00080080
#define ROUND_SINGLE            0x00000000
#define ROUND_DOUBLE            0x00000080
#define ROUND_EXTENDED          0x00080000

/* Get the condition code from the opcode. */
#define getCondition(opcode)            (opcode >> 28)

/* Get the source register from the opcode. */
#define getRn(opcode)                   ((opcode & MASK_Rn) >> 16)

/* Get the destination floating point register from the opcode. */
#define getFd(opcode)                   ((opcode & MASK_Fd) >> 12)

/* Get the first source floating point register from the opcode. */
#define getFn(opcode)           ((opcode & MASK_Fn) >> 16)

/* Get the second source floating point register from the opcode. */
#define getFm(opcode)           (opcode & MASK_Fm)

/* Get the destination register from the opcode. */
#define getRd(opcode)           ((opcode & MASK_Rd) >> 12)

/* Get the rounding mode from the opcode. */
#define getRoundingMode(opcode)         ((opcode & MASK_ROUNDING_MODE) >> 5)

#ifdef CONFIG_FPE_NWFPE_XP
static inline const floatx80 getExtendedConstant(const unsigned int nIndex)
{
        extern const floatx80 floatx80Constant[];
        return floatx80Constant[nIndex];
}
#endif

static inline const float64 getDoubleConstant(const unsigned int nIndex)
{
        extern const float64 float64Constant[];
        return float64Constant[nIndex];
}

static inline const float32 getSingleConstant(const unsigned int nIndex)
{
        extern const float32 float32Constant[];
        return float32Constant[nIndex];
}

static inline unsigned int getTransferLength(const unsigned int opcode)
{
        unsigned int nRc;

        switch (opcode & MASK_TRANSFER_LENGTH) {
        case 0x00000000:
                nRc = 1;
                break;          /* single precision */
        case 0x00008000:
                nRc = 2;
                break;          /* double precision */
        case 0x00400000:
                nRc = 3;
                break;          /* extended precision */
        default:
                nRc = 0;
        }

        return (nRc);
}

static inline unsigned int getRegisterCount(const unsigned int opcode)
{
        unsigned int nRc;

        switch (opcode & MASK_REGISTER_COUNT) {
        case 0x00000000:
                nRc = 4;
                break;
        case 0x00008000:
                nRc = 1;
                break;
        case 0x00400000:
                nRc = 2;
                break;
        case 0x00408000:
                nRc = 3;
                break;
        default:
                nRc = 0;
        }

        return (nRc);
}

static inline unsigned int getRoundingPrecision(const unsigned int opcode)
{
        unsigned int nRc;

        switch (opcode & MASK_ROUNDING_PRECISION) {
        case 0x00000000:
                nRc = 1;
                break;
        case 0x00000080:
                nRc = 2;
                break;
        case 0x00080000:
                nRc = 3;
                break;
        default:
                nRc = 0;
        }

        return (nRc);
}

static inline unsigned int getDestinationSize(const unsigned int opcode)
{
        unsigned int nRc;

        switch (opcode & MASK_DESTINATION_SIZE) {
        case 0x00000000:
                nRc = typeSingle;
                break;
        case 0x00000080:
                nRc = typeDouble;
                break;
        case 0x00080000:
                nRc = typeExtended;
                break;
        default:
                nRc = typeNone;
        }

        return (nRc);
}

#endif