/*
 *      Copyright (c) 1995-1997 Claus-Justus Heine 

 This program is free software; you can redistribute it and/or
 modify it under the terms of the GNU General Public License as
 published by the Free Software Foundation; either version 2, or (at
 your option) any later version.
 
 This program is distributed in the hope that it will be useful, but
 WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 General Public License for more details.
 
 You should have received a copy of the GNU General Public License
 along with this program; see the file COPYING.  If not, write to
 the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139,
 USA.

 *
 * $Source: /homes/cvs/ftape-stacked/ftape/zftape/zftape-vtbl.c,v $
 * $Revision: 1.7.6.1 $
 * $Date: 1997/11/24 13:48:31 $
 *
 *      This file defines a volume table as defined in various QIC
 *      standards.
 * 
 *      This is a minimal implementation, just allowing ordinary DOS
 *      :( prgrams to identify the cartridge as used.
 */

#include <linux/errno.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <asm/segment.h>

#include <linux/zftape.h>
#include "../zftape/zftape-init.h"
#include "../zftape/zftape-eof.h"
#include "../zftape/zftape-ctl.h"
#include "../zftape/zftape-write.h"
#include "../zftape/zftape-read.h"
#include "../zftape/zftape-rw.h"
#include "../zftape/zftape-vtbl.h"

#define ZFT_CMAP_HACK /* leave this defined to hide the compression map */

/*
 *  global variables 
 */
int zft_qic_mode   = 1; /* use the vtbl */
int zft_old_ftape; /* prevents old ftaped tapes to be overwritten */
int zft_volume_table_changed; /* for write_header_segments() */

/*
 *  private variables (only exported for inline functions)
 */
LIST_HEAD(zft_vtbl);

/*  We could also allocate these dynamically when extracting the volume table
 *  sizeof(zft_volinfo) is about 32 or something close to that
 */
static zft_volinfo  tape_vtbl;
static zft_volinfo  eot_vtbl;
static zft_volinfo *cur_vtbl;

inline void zft_new_vtbl_entry(void)
{
        struct list_head *tmp = &zft_last_vtbl->node;
        zft_volinfo *new = zft_kmalloc(sizeof(zft_volinfo));

        list_add(&new->node, tmp);
        new->count = zft_eom_vtbl->count ++;
}

void zft_free_vtbl(void)
{
        for (;;) {
                struct list_head *tmp = zft_vtbl.prev;
                zft_volinfo *vtbl;

                if (tmp == &zft_vtbl)
                        break;
                list_del(tmp);
                vtbl = list_entry(tmp, zft_volinfo, node);
                zft_kfree(vtbl, sizeof(zft_volinfo));
        }
        INIT_LIST_HEAD(&zft_vtbl);
        cur_vtbl = NULL;
}

/*  initialize vtbl, called by ftape_new_cartridge()
 */
void zft_init_vtbl(void)
{ 
        zft_volinfo *new;

        zft_free_vtbl();
        
        /*  Create the two dummy vtbl entries
         */
        new = zft_kmalloc(sizeof(zft_volinfo));
        list_add(&new->node, &zft_vtbl);
        new = zft_kmalloc(sizeof(zft_volinfo));
        list_add(&new->node, &zft_vtbl);
        zft_head_vtbl->end_seg   = ft_first_data_segment;
        zft_head_vtbl->blk_sz    = zft_blk_sz;
        zft_head_vtbl->count     = -1;
        zft_eom_vtbl->start_seg  = ft_first_data_segment + 1;
        zft_eom_vtbl->end_seg    = ft_last_data_segment + 1;
        zft_eom_vtbl->blk_sz     = zft_blk_sz;
        zft_eom_vtbl->count      = 0;

        /*  Reset the pointer for zft_find_volume()
         */
        cur_vtbl = zft_eom_vtbl;

        /* initialize the dummy vtbl entries for zft_qic_mode == 0
         */
        eot_vtbl.start_seg       = ft_last_data_segment + 1;
        eot_vtbl.end_seg         = ft_last_data_segment + 1;
        eot_vtbl.blk_sz          = zft_blk_sz;
        eot_vtbl.count           = -1;
        tape_vtbl.start_seg = ft_first_data_segment;
        tape_vtbl.end_seg   = ft_last_data_segment;
        tape_vtbl.blk_sz    = zft_blk_sz;
        tape_vtbl.size      = zft_capacity;
        tape_vtbl.count     = 0;
}

/* check for a valid VTBL signature. 
 */
static int vtbl_signature_valid(__u8 signature[4])
{
        const char *vtbl_ids[] = VTBL_IDS; /* valid signatures */
        int j;
        
        for (j = 0; 
             (j < NR_ITEMS(vtbl_ids)) && (memcmp(signature, vtbl_ids[j], 4) != 0);
             j++);
        return j < NR_ITEMS(vtbl_ids);
}

/* We used to store the block-size of the volume in the volume-label,
 * using the keyword "blocksize". The blocksize written to the
 * volume-label is in bytes.
 *
 * We use this now only for compatability with old zftape version. We
 * store the blocksize directly as binary number in the vendor
 * extension part of the volume entry.
 */
static int check_volume_label(const char *label, int *blk_sz)
{ 
        int valid_format;
        char *blocksize;
        TRACE_FUN(ft_t_flow);
        
        TRACE(ft_t_noise, "called with \"%s\" / \"%s\"", label, ZFT_VOL_NAME);
        if (strncmp(label, ZFT_VOL_NAME, strlen(ZFT_VOL_NAME)) != 0) {
                *blk_sz = 1; /* smallest block size that we allow */
                valid_format = 0;
        } else {
                TRACE(ft_t_noise, "got old style zftape vtbl entry");
                /* get the default blocksize */
                /* use the kernel strstr()   */
                blocksize= strstr(label, " blocksize ");
                if (blocksize) {
                        blocksize += strlen(" blocksize ");
                        for(*blk_sz= 0; 
                            *blocksize >= '0' && *blocksize <= '9'; 
                            blocksize++) {
                                *blk_sz *= 10;
                                *blk_sz += *blocksize - '0';
                        }
                        if (*blk_sz > ZFT_MAX_BLK_SZ) {
                                *blk_sz= 1;
                                valid_format= 0;
                        } else {
                                valid_format = 1;
                        }
                } else {
                        *blk_sz= 1;
                        valid_format= 0;
                }
        }
        TRACE_EXIT valid_format;
}

/*   check for a zftape volume
 */
static int check_volume(__u8 *entry, zft_volinfo *volume)
{
        TRACE_FUN(ft_t_flow);
        
        if(strncmp(&entry[VTBL_EXT+EXT_ZFTAPE_SIG], ZFTAPE_SIG,
                   strlen(ZFTAPE_SIG)) == 0) {
                TRACE(ft_t_noise, "got new style zftape vtbl entry");
                volume->blk_sz = GET2(entry, VTBL_EXT+EXT_ZFTAPE_BLKSZ);
                volume->qic113 = entry[VTBL_EXT+EXT_ZFTAPE_QIC113];
                TRACE_EXIT 1;
        } else {
                TRACE_EXIT check_volume_label(&entry[VTBL_DESC], &volume->blk_sz);
        }
}


/* create zftape specific vtbl entry, the volume bounds are inserted
 * in the calling function, zft_create_volume_headers()
 */
static void create_zft_volume(__u8 *entry, zft_volinfo *vtbl)
{
        TRACE_FUN(ft_t_flow);

        memset(entry, 0, VTBL_SIZE);
        memcpy(&entry[VTBL_SIG], VTBL_ID, 4);
        sprintf(&entry[VTBL_DESC], ZFT_VOL_NAME" %03d", vtbl->count);
        entry[VTBL_FLAGS] = (VTBL_FL_NOT_VERIFIED | VTBL_FL_SEG_SPANNING);
        entry[VTBL_M_NO] = 1; /* multi_cartridge_count */
        strcpy(&entry[VTBL_EXT+EXT_ZFTAPE_SIG], ZFTAPE_SIG);
        PUT2(entry, VTBL_EXT+EXT_ZFTAPE_BLKSZ, vtbl->blk_sz);
        if (zft_qic113) {
                PUT8(entry, VTBL_DATA_SIZE, vtbl->size);
                entry[VTBL_CMPR] = VTBL_CMPR_UNREG; 
                if (vtbl->use_compression) { /* use compression: */
                        entry[VTBL_CMPR] |= VTBL_CMPR_USED;
                }
                entry[VTBL_EXT+EXT_ZFTAPE_QIC113] = 1;
        } else {
                PUT4(entry, VTBL_DATA_SIZE, vtbl->size);
                entry[VTBL_K_CMPR] = VTBL_CMPR_UNREG; 
                if (vtbl->use_compression) { /* use compression: */
                        entry[VTBL_K_CMPR] |= VTBL_CMPR_USED;
                }
        }
        if (ft_format_code == fmt_big) {
                /* SCSI like vtbl, store the number of used
                 * segments as 4 byte value 
                 */
                PUT4(entry, VTBL_SCSI_SEGS, vtbl->end_seg-vtbl->start_seg + 1);
        } else {
                /* normal, QIC-80MC like vtbl 
                 */
                PUT2(entry, VTBL_START, vtbl->start_seg);
                PUT2(entry, VTBL_END, vtbl->end_seg);
        }
        TRACE_EXIT;
}

/* this one creates the volume headers for each volume. It is assumed
 * that buffer already contains the old volume-table, so that vtbl
 * entries without the zft_volume flag set can savely be ignored.
 */
void zft_create_volume_headers(__u8 *buffer)
{   
        __u8 *entry;
        struct list_head *tmp;
        zft_volinfo *vtbl;
        TRACE_FUN(ft_t_flow);
        
#ifdef ZFT_CMAP_HACK
        if((strncmp(&buffer[VTBL_EXT+EXT_ZFTAPE_SIG], ZFTAPE_SIG,
                    strlen(ZFTAPE_SIG)) == 0) && 
           buffer[VTBL_EXT+EXT_ZFTAPE_CMAP] != 0) {
                TRACE(ft_t_noise, "deleting cmap volume");
                memmove(buffer, buffer + VTBL_SIZE,
                        FT_SEGMENT_SIZE - VTBL_SIZE);
        }
#endif
        entry = buffer;
        for (tmp = zft_head_vtbl->node.next;
             tmp != &zft_eom_vtbl->node;
             tmp = tmp->next) {
                vtbl = list_entry(tmp, zft_volinfo, node);
                /* we now fill in the values only for newly created volumes.
                 */
                if (vtbl->new_volume) {
                        create_zft_volume(entry, vtbl);
                        vtbl->new_volume = 0; /* clear the flag */
                }
                
                DUMP_VOLINFO(ft_t_noise, &entry[VTBL_DESC], vtbl);
                entry += VTBL_SIZE;
        }
        memset(entry, 0, FT_SEGMENT_SIZE - zft_eom_vtbl->count * VTBL_SIZE);
        TRACE_EXIT;
}

/*  write volume table to tape. Calls zft_create_volume_headers()
 */
int zft_update_volume_table(unsigned int segment)
{
        int result = 0;
        __u8 *verify_buf = NULL;
        TRACE_FUN(ft_t_flow);

        TRACE_CATCH(result = ftape_read_segment(ft_first_data_segment, 
                                                zft_deblock_buf,
                                                FT_RD_SINGLE),);
        zft_create_volume_headers(zft_deblock_buf);
        TRACE(ft_t_noise, "writing volume table segment %d", segment);
        if (zft_vmalloc_once(&verify_buf, FT_SEGMENT_SIZE) == 0) {
                TRACE_CATCH(zft_verify_write_segments(segment, 
                                                      zft_deblock_buf, result,
                                                      verify_buf),
                            zft_vfree(&verify_buf, FT_SEGMENT_SIZE));
                zft_vfree(&verify_buf, FT_SEGMENT_SIZE);
        } else {
                TRACE_CATCH(ftape_write_segment(segment, zft_deblock_buf, 
                                                FT_WR_SINGLE),);
        }
        TRACE_EXIT 0;
}

/* non zftape volumes are handled in raw mode. Thus we need to
 * calculate the raw amount of data contained in those segments.  
 */
static void extract_alien_volume(__u8 *entry, zft_volinfo *vtbl)
{
        TRACE_FUN(ft_t_flow);

        vtbl->size  = (zft_calc_tape_pos(zft_last_vtbl->end_seg+1) -
                       zft_calc_tape_pos(zft_last_vtbl->start_seg));
        vtbl->use_compression = 0;
        vtbl->qic113 = zft_qic113;
        if (vtbl->qic113) {
                TRACE(ft_t_noise, 
                      "Fake alien volume's size from " LL_X " to " LL_X, 
                      LL(GET8(entry, VTBL_DATA_SIZE)), LL(vtbl->size));
        } else {
                TRACE(ft_t_noise,
                      "Fake alien volume's size from %d to " LL_X, 
                      (int)GET4(entry, VTBL_DATA_SIZE), LL(vtbl->size));
        }
        TRACE_EXIT;
}


/* extract an zftape specific volume
 */
static void extract_zft_volume(__u8 *entry, zft_volinfo *vtbl)
{
        TRACE_FUN(ft_t_flow);

        if (vtbl->qic113) {
                vtbl->size = GET8(entry, VTBL_DATA_SIZE);
                vtbl->use_compression = 
                        (entry[VTBL_CMPR] & VTBL_CMPR_USED) != 0; 
        } else {
                vtbl->size = GET4(entry, VTBL_DATA_SIZE);
                if (entry[VTBL_K_CMPR] & VTBL_CMPR_UNREG) {
                        vtbl->use_compression = 
                                (entry[VTBL_K_CMPR] & VTBL_CMPR_USED) != 0;
                } else if (entry[VTBL_CMPR] & VTBL_CMPR_UNREG) {
                        vtbl->use_compression = 
                                (entry[VTBL_CMPR] & VTBL_CMPR_USED) != 0; 
                } else {
                        TRACE(ft_t_warn, "Geeh! There is something wrong:\n"
                              KERN_INFO "QIC compression (Rev = K): %x\n"
                              KERN_INFO "QIC compression (Rev > K): %x",
                              entry[VTBL_K_CMPR], entry[VTBL_CMPR]);
                }
        }
        TRACE_EXIT;
}

/* extract the volume table from buffer. "buffer" must already contain
 * the vtbl-segment 
 */
int zft_extract_volume_headers(__u8 *buffer)
{                            
        __u8 *entry;
        TRACE_FUN(ft_t_flow);
        
        zft_init_vtbl();
        entry = buffer;
#ifdef ZFT_CMAP_HACK
        if ((strncmp(&entry[VTBL_EXT+EXT_ZFTAPE_SIG], ZFTAPE_SIG,
                     strlen(ZFTAPE_SIG)) == 0) &&
            entry[VTBL_EXT+EXT_ZFTAPE_CMAP] != 0) {
                TRACE(ft_t_noise, "ignoring cmap volume");
                entry += VTBL_SIZE;
        } 
#endif
        /* the end of the vtbl is indicated by an invalid signature 
         */
        while (vtbl_signature_valid(&entry[VTBL_SIG]) &&
               (entry - buffer) < FT_SEGMENT_SIZE) {
                zft_new_vtbl_entry();
                if (ft_format_code == fmt_big) {
                        /* SCSI like vtbl, stores only the number of
                         * segments used 
                         */
                        unsigned int num_segments= GET4(entry, VTBL_SCSI_SEGS);
                        zft_last_vtbl->start_seg = zft_eom_vtbl->start_seg;
                        zft_last_vtbl->end_seg = 
                                zft_last_vtbl->start_seg + num_segments - 1;
                } else {
                        /* `normal', QIC-80 like vtbl 
                         */
                        zft_last_vtbl->start_seg = GET2(entry, VTBL_START);
                        zft_last_vtbl->end_seg   = GET2(entry, VTBL_END);
                }
                zft_eom_vtbl->start_seg  = zft_last_vtbl->end_seg + 1;
                /* check if we created this volume and get the
                 * blk_sz 
                 */
                zft_last_vtbl->zft_volume = check_volume(entry, zft_last_vtbl);
                if (zft_last_vtbl->zft_volume == 0) {
                        extract_alien_volume(entry, zft_last_vtbl);
                } else {
                        extract_zft_volume(entry, zft_last_vtbl);
                }
                DUMP_VOLINFO(ft_t_noise, &entry[VTBL_DESC], zft_last_vtbl);
                entry +=VTBL_SIZE;
        }
#if 0
/*
 *  undefine to test end of tape handling
 */
        zft_new_vtbl_entry();
        zft_last_vtbl->start_seg = zft_eom_vtbl->start_seg;
        zft_last_vtbl->end_seg   = ft_last_data_segment - 10;
        zft_last_vtbl->blk_sz          = zft_blk_sz;
        zft_last_vtbl->zft_volume      = 1;
        zft_last_vtbl->qic113          = zft_qic113;
        zft_last_vtbl->size = (zft_calc_tape_pos(zft_last_vtbl->end_seg+1)
                               - zft_calc_tape_pos(zft_last_vtbl->start_seg));
#endif
        TRACE_EXIT 0;
}

/* this functions translates the failed_sector_log, misused as
 * EOF-marker list, into a virtual volume table. The table mustn't be
 * written to tape, because this would occupy the first data segment,
 * which should be the volume table, but is actually the first segment
 * that is filled with data (when using standard ftape).  We assume,
 * that we get a non-empty failed_sector_log.
 */
int zft_fake_volume_headers (eof_mark_union *eof_map, int num_failed_sectors)
{
        unsigned int segment, sector;
        int have_eom = 0;
        int vol_no;
        TRACE_FUN(ft_t_flow);

        if ((num_failed_sectors >= 2) &&
            (GET2(&eof_map[num_failed_sectors - 1].mark.segment, 0) 
             == 
             GET2(&eof_map[num_failed_sectors - 2].mark.segment, 0) + 1) &&
            (GET2(&eof_map[num_failed_sectors - 1].mark.date, 0) == 1)) {
                /* this should be eom. We keep the remainder of the
                 * tape as another volume.
                 */
                have_eom = 1;
        }
        zft_init_vtbl();
        zft_eom_vtbl->start_seg = ft_first_data_segment;
        for(vol_no = 0; vol_no < num_failed_sectors - have_eom; vol_no ++) {
                zft_new_vtbl_entry();

                segment = GET2(&eof_map[vol_no].mark.segment, 0);
                sector  = GET2(&eof_map[vol_no].mark.date, 0);

                zft_last_vtbl->start_seg  = zft_eom_vtbl->start_seg;
                zft_last_vtbl->end_seg    = segment;
                zft_eom_vtbl->start_seg  = segment + 1;
                zft_last_vtbl->blk_sz     = 1;
                zft_last_vtbl->size       = 
                        (zft_calc_tape_pos(zft_last_vtbl->end_seg)
                         - zft_calc_tape_pos(zft_last_vtbl->start_seg)
                         + (sector-1) * FT_SECTOR_SIZE);
                TRACE(ft_t_noise, 
                      "failed sector log: segment: %d, sector: %d", 
                      segment, sector);
                DUMP_VOLINFO(ft_t_noise, "Faked volume", zft_last_vtbl);
        }
        if (!have_eom) {
                zft_new_vtbl_entry();
                zft_last_vtbl->start_seg = zft_eom_vtbl->start_seg;
                zft_last_vtbl->end_seg   = ft_last_data_segment;
                zft_eom_vtbl->start_seg  = ft_last_data_segment + 1;
                zft_last_vtbl->size      = zft_capacity;
                zft_last_vtbl->size     -= zft_calc_tape_pos(zft_last_vtbl->start_seg);
                zft_last_vtbl->blk_sz    = 1;
                DUMP_VOLINFO(ft_t_noise, "Faked volume",zft_last_vtbl);
        }
        TRACE_EXIT 0;
}

/* update the internal volume table
 *
 * if before start of last volume: erase all following volumes if
 * inside a volume: set end of volume to infinity
 *
 * this function is intended to be called every time _ftape_write() is
 * called
 *
 * return: 0 if no new volume was created, 1 if a new volume was
 * created
 *
 * NOTE: we don't need to check for zft_mode as ftape_write() does
 * that already. This function gets never called without accessing
 * zftape via the *qft* devices 
 */

int zft_open_volume(zft_position *pos, int blk_sz, int use_compression)
{ 
        TRACE_FUN(ft_t_flow);
        
        if (!zft_qic_mode) {
                TRACE_EXIT 0;
        }
        if (zft_tape_at_lbot(pos)) {
                zft_init_vtbl();
                if(zft_old_ftape) {
                        /* clear old ftape's eof marks */
                        zft_clear_ftape_file_marks();
                        zft_old_ftape = 0; /* no longer old ftape */
                }
                zft_reset_position(pos);
        }
        if (pos->seg_pos != zft_last_vtbl->end_seg + 1) {
                TRACE_ABORT(-EIO, ft_t_bug, 
                      "BUG: seg_pos: %d, zft_last_vtbl->end_seg: %d", 
                      pos->seg_pos, zft_last_vtbl->end_seg);
        }                            
        TRACE(ft_t_noise, "create new volume");
        if (zft_eom_vtbl->count >= ZFT_MAX_VOLUMES) {
                TRACE_ABORT(-ENOSPC, ft_t_err,
                            "Error: maxmimal number of volumes exhausted "
                            "(maxmimum is %d)", ZFT_MAX_VOLUMES);
        }
        zft_new_vtbl_entry();
        pos->volume_pos = pos->seg_byte_pos = 0;
        zft_last_vtbl->start_seg       = pos->seg_pos;
        zft_last_vtbl->end_seg         = ft_last_data_segment; /* infinity */
        zft_last_vtbl->blk_sz          = blk_sz;
        zft_last_vtbl->size            = zft_capacity;
        zft_last_vtbl->zft_volume      = 1;
        zft_last_vtbl->use_compression = use_compression;
        zft_last_vtbl->qic113          = zft_qic113;
        zft_last_vtbl->new_volume      = 1;
        zft_last_vtbl->open            = 1;
        zft_volume_table_changed = 1;
        zft_eom_vtbl->start_seg  = ft_last_data_segment + 1;
        TRACE_EXIT 0;
}

/*  perform mtfsf, mtbsf, not allowed without zft_qic_mode
 */
int zft_skip_volumes(int count, zft_position *pos)
{ 
        const zft_volinfo *vtbl;
        TRACE_FUN(ft_t_flow);
        
        TRACE(ft_t_noise, "count: %d", count);
        
        vtbl= zft_find_volume(pos->seg_pos);
        while (count > 0 && vtbl != zft_eom_vtbl) {
                vtbl = list_entry(vtbl->node.next, zft_volinfo, node);
                count --;
        }
        while (count < 0 && vtbl != zft_first_vtbl) {
                vtbl = list_entry(vtbl->node.prev, zft_volinfo, node);
                count ++;
        }
        pos->seg_pos        = vtbl->start_seg;
        pos->seg_byte_pos   = 0;
        pos->volume_pos     = 0;
        pos->tape_pos       = zft_calc_tape_pos(pos->seg_pos);
        zft_just_before_eof = vtbl->size == 0;
        if (zft_cmpr_ops) {
                (*zft_cmpr_ops->reset)();
        }
        zft_deblock_segment = -1; /* no need to keep cache */
        TRACE(ft_t_noise, "repositioning to:\n"
              KERN_INFO "zft_seg_pos        : %d\n"
              KERN_INFO "zft_seg_byte_pos   : %d\n"
              KERN_INFO "zft_tape_pos       : " LL_X "\n"
              KERN_INFO "zft_volume_pos     : " LL_X "\n"
              KERN_INFO "file number        : %d",
              pos->seg_pos, pos->seg_byte_pos, 
              LL(pos->tape_pos), LL(pos->volume_pos), vtbl->count);
        zft_resid = count < 0 ? -count : count;
        TRACE_EXIT zft_resid ? -EINVAL : 0;
}

/* the following simply returns the raw data position of the EOM
 * marker, MTIOCSIZE ioctl 
 */
__s64 zft_get_eom_pos(void)
{
        if (zft_qic_mode) {
                return zft_calc_tape_pos(zft_eom_vtbl->start_seg);
        } else {
                /* there is only one volume in raw mode */
                return zft_capacity;
        }
}

/* skip to eom, used for MTEOM
 */
void zft_skip_to_eom(zft_position *pos)
{
        TRACE_FUN(ft_t_flow);
        pos->seg_pos      = zft_eom_vtbl->start_seg;
        pos->seg_byte_pos = 
                pos->volume_pos     = 
                zft_just_before_eof = 0;
        pos->tape_pos = zft_calc_tape_pos(pos->seg_pos);
        TRACE(ft_t_noise, "ftape positioned to segment %d, data pos " LL_X, 
              pos->seg_pos, LL(pos->tape_pos));
        TRACE_EXIT;
}

/*  write an EOF-marker by setting zft_last_vtbl->end_seg to seg_pos.
 *  NOTE: this function assumes that zft_last_vtbl points to a valid
 *  vtbl entry
 *
 *  NOTE: this routine always positions before the EOF marker
 */
int zft_close_volume(zft_position *pos)
{
        TRACE_FUN(ft_t_any);

        if (zft_vtbl_empty || !zft_last_vtbl->open) { /* should not happen */
                TRACE(ft_t_noise, "There are no volumes to finish");
                TRACE_EXIT -EIO;
        }
        if (pos->seg_byte_pos == 0 && 
            pos->seg_pos != zft_last_vtbl->start_seg) {
                pos->seg_pos --;
                pos->seg_byte_pos      = zft_get_seg_sz(pos->seg_pos);
        }
        zft_last_vtbl->end_seg   = pos->seg_pos;
        zft_last_vtbl->size      = pos->volume_pos;
        zft_volume_table_changed = 1;
        zft_just_before_eof      = 1;
        zft_eom_vtbl->start_seg  = zft_last_vtbl->end_seg + 1;
        zft_last_vtbl->open      = 0; /* closed */
        TRACE_EXIT 0;
}

/* write count file-marks at current position. 
 *
 *  The tape is positioned after the eof-marker, that is at byte 0 of
 *  the segment following the eof-marker
 *
 *  this function is only allowed in zft_qic_mode
 *
 *  Only allowed when tape is at BOT or EOD.
 */
int zft_weof(unsigned int count, zft_position *pos)
{
        
        TRACE_FUN(ft_t_flow);

        if (!count) { /* write zero EOF marks should be a real no-op */
                TRACE_EXIT 0;
        }
        zft_volume_table_changed = 1;
        if (zft_tape_at_lbot(pos)) {
                zft_init_vtbl();
                if(zft_old_ftape) {
                        /* clear old ftape's eof marks */
                        zft_clear_ftape_file_marks();
                        zft_old_ftape = 0;    /* no longer old ftape */
                }
        }
        if (zft_last_vtbl->open) {
                zft_close_volume(pos);
                zft_move_past_eof(pos);
                count --;
        }
        /* now it's easy, just append eof-marks, that is empty
         * volumes, to the end of the already recorded media.
         */
        while (count > 0 && 
               pos->seg_pos <= ft_last_data_segment && 
               zft_eom_vtbl->count < ZFT_MAX_VOLUMES) {
                TRACE(ft_t_noise,
                      "Writing zero sized file at segment %d", pos->seg_pos);
                zft_new_vtbl_entry();
                zft_last_vtbl->start_seg       = pos->seg_pos;
                zft_last_vtbl->end_seg         = pos->seg_pos;
                zft_last_vtbl->size            = 0;
                zft_last_vtbl->blk_sz          = zft_blk_sz;
                zft_last_vtbl->zft_volume      = 1;
                zft_last_vtbl->use_compression = 0;
                pos->tape_pos += zft_get_seg_sz(pos->seg_pos);
                zft_eom_vtbl->start_seg = ++ pos->seg_pos;
                count --;
        } 
        if (count > 0) {
                /*  there are two possibilities: end of tape, or the
                 *  maximum number of files is exhausted.
                 */
                zft_resid = count;
                TRACE(ft_t_noise,"Number of marks NOT written: %d", zft_resid);
                if (zft_eom_vtbl->count == ZFT_MAX_VOLUMES) {
                        TRACE_ABORT(-EINVAL, ft_t_warn,
                                    "maximum allowed number of files "
                                    "exhausted: %d", ZFT_MAX_VOLUMES);
                } else {
                        TRACE_ABORT(-ENOSPC,
                                    ft_t_noise, "reached end of tape");
                }
        }
        TRACE_EXIT 0;
}

const zft_volinfo *zft_find_volume(unsigned int seg_pos)
{
        TRACE_FUN(ft_t_flow);
        
        TRACE(ft_t_any, "called with seg_pos %d",seg_pos);
        if (!zft_qic_mode) {
                if (seg_pos > ft_last_data_segment) {
                        TRACE_EXIT &eot_vtbl;
                }
                tape_vtbl.blk_sz =  zft_blk_sz;
                TRACE_EXIT &tape_vtbl;
        }
        if (seg_pos < zft_first_vtbl->start_seg) {
                TRACE_EXIT (cur_vtbl = zft_first_vtbl);
        }
        while (seg_pos > cur_vtbl->end_seg) {
                cur_vtbl = list_entry(cur_vtbl->node.next, zft_volinfo, node);
                TRACE(ft_t_noise, "%d - %d", cur_vtbl->start_seg, cur_vtbl->end_seg);
        }
        while (seg_pos < cur_vtbl->start_seg) {
                cur_vtbl = list_entry(cur_vtbl->node.prev, zft_volinfo, node);
                TRACE(ft_t_noise, "%d - %d", cur_vtbl->start_seg, cur_vtbl->end_seg);
        }
        if (seg_pos > cur_vtbl->end_seg || seg_pos < cur_vtbl->start_seg) {
                TRACE(ft_t_bug, "This cannot happen");
        }
        DUMP_VOLINFO(ft_t_noise, "", cur_vtbl);
        TRACE_EXIT cur_vtbl;
}

/* this function really assumes that we are just before eof
 */
void zft_move_past_eof(zft_position *pos)
{ 
        TRACE_FUN(ft_t_flow);

        TRACE(ft_t_noise, "old seg. pos: %d", pos->seg_pos);
        pos->tape_pos += zft_get_seg_sz(pos->seg_pos++) - pos->seg_byte_pos;
        pos->seg_byte_pos = 0;
        pos->volume_pos   = 0;
        if (zft_cmpr_ops) {
                (*zft_cmpr_ops->reset)();
        }
        zft_just_before_eof =  0;
        zft_deblock_segment = -1; /* no need to cache it anymore */
        TRACE(ft_t_noise, "new seg. pos: %d", pos->seg_pos);
        TRACE_EXIT;
}