linux/arch/arm/mach-omap1/clock.h
<<
>>
Prefs
   1/* SPDX-License-Identifier: GPL-2.0-only */
   2/*
   3 *  linux/arch/arm/mach-omap1/clock.h
   4 *
   5 *  Copyright (C) 2004 - 2005, 2009 Nokia corporation
   6 *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
   7 *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
   8 */
   9
  10#ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H
  11#define __ARCH_ARM_MACH_OMAP1_CLOCK_H
  12
  13#include <linux/clk.h>
  14#include <linux/list.h>
  15
  16#include <linux/clkdev.h>
  17
  18struct module;
  19struct clk;
  20
  21struct omap_clk {
  22        u16                             cpu;
  23        struct clk_lookup               lk;
  24};
  25
  26#define CLK(dev, con, ck, cp)           \
  27        {                               \
  28                 .cpu = cp,             \
  29                .lk = {                 \
  30                        .dev_id = dev,  \
  31                        .con_id = con,  \
  32                        .clk = ck,      \
  33                },                      \
  34        }
  35
  36/* Platform flags for the clkdev-OMAP integration code */
  37#define CK_310          (1 << 0)
  38#define CK_7XX          (1 << 1)        /* 7xx, 850 */
  39#define CK_1510         (1 << 2)
  40#define CK_16XX         (1 << 3)        /* 16xx, 17xx, 5912 */
  41#define CK_1710         (1 << 4)        /* 1710 extra for rate selection */
  42
  43
  44/* Temporary, needed during the common clock framework conversion */
  45#define __clk_get_name(clk)     (clk->name)
  46#define __clk_get_parent(clk)   (clk->parent)
  47#define __clk_get_rate(clk)     (clk->rate)
  48
  49/**
  50 * struct clkops - some clock function pointers
  51 * @enable: fn ptr that enables the current clock in hardware
  52 * @disable: fn ptr that enables the current clock in hardware
  53 * @find_idlest: function returning the IDLEST register for the clock's IP blk
  54 * @find_companion: function returning the "companion" clk reg for the clock
  55 * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
  56 * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
  57 *
  58 * A "companion" clk is an accompanying clock to the one being queried
  59 * that must be enabled for the IP module connected to the clock to
  60 * become accessible by the hardware.  Neither @find_idlest nor
  61 * @find_companion should be needed; that information is IP
  62 * block-specific; the hwmod code has been created to handle this, but
  63 * until hwmod data is ready and drivers have been converted to use PM
  64 * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
  65 * @find_companion must, unfortunately, remain.
  66 */
  67struct clkops {
  68        int                     (*enable)(struct clk *);
  69        void                    (*disable)(struct clk *);
  70        void                    (*find_idlest)(struct clk *, void __iomem **,
  71                                               u8 *, u8 *);
  72        void                    (*find_companion)(struct clk *, void __iomem **,
  73                                                  u8 *);
  74        void                    (*allow_idle)(struct clk *);
  75        void                    (*deny_idle)(struct clk *);
  76};
  77
  78/*
  79 * struct clk.flags possibilities
  80 *
  81 * XXX document the rest of the clock flags here
  82 *
  83 * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
  84 *     bits share the same register.  This flag allows the
  85 *     omap4_dpllmx*() code to determine which GATE_CTRL bit field
  86 *     should be used.  This is a temporary solution - a better approach
  87 *     would be to associate clock type-specific data with the clock,
  88 *     similar to the struct dpll_data approach.
  89 */
  90#define ENABLE_REG_32BIT        (1 << 0)        /* Use 32-bit access */
  91#define CLOCK_IDLE_CONTROL      (1 << 1)
  92#define CLOCK_NO_IDLE_PARENT    (1 << 2)
  93#define ENABLE_ON_INIT          (1 << 3)        /* Enable upon framework init */
  94#define INVERT_ENABLE           (1 << 4)        /* 0 enables, 1 disables */
  95#define CLOCK_CLKOUTX2          (1 << 5)
  96
  97/**
  98 * struct clk - OMAP struct clk
  99 * @node: list_head connecting this clock into the full clock list
 100 * @ops: struct clkops * for this clock
 101 * @name: the name of the clock in the hardware (used in hwmod data and debug)
 102 * @parent: pointer to this clock's parent struct clk
 103 * @children: list_head connecting to the child clks' @sibling list_heads
 104 * @sibling: list_head connecting this clk to its parent clk's @children
 105 * @rate: current clock rate
 106 * @enable_reg: register to write to enable the clock (see @enable_bit)
 107 * @recalc: fn ptr that returns the clock's current rate
 108 * @set_rate: fn ptr that can change the clock's current rate
 109 * @round_rate: fn ptr that can round the clock's current rate
 110 * @init: fn ptr to do clock-specific initialization
 111 * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
 112 * @usecount: number of users that have requested this clock to be enabled
 113 * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
 114 * @flags: see "struct clk.flags possibilities" above
 115 * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
 116 * @src_offset: bitshift for source selection bitfield (OMAP1 only)
 117 *
 118 * XXX @rate_offset, @src_offset should probably be removed and OMAP1
 119 * clock code converted to use clksel.
 120 *
 121 * XXX @usecount is poorly named.  It should be "enable_count" or
 122 * something similar.  "users" in the description refers to kernel
 123 * code (core code or drivers) that have called clk_enable() and not
 124 * yet called clk_disable(); the usecount of parent clocks is also
 125 * incremented by the clock code when clk_enable() is called on child
 126 * clocks and decremented by the clock code when clk_disable() is
 127 * called on child clocks.
 128 *
 129 * XXX @clkdm, @usecount, @children, @sibling should be marked for
 130 * internal use only.
 131 *
 132 * @children and @sibling are used to optimize parent-to-child clock
 133 * tree traversals.  (child-to-parent traversals use @parent.)
 134 *
 135 * XXX The notion of the clock's current rate probably needs to be
 136 * separated from the clock's target rate.
 137 */
 138struct clk {
 139        struct list_head        node;
 140        const struct clkops     *ops;
 141        const char              *name;
 142        struct clk              *parent;
 143        struct list_head        children;
 144        struct list_head        sibling;        /* node for children */
 145        unsigned long           rate;
 146        void __iomem            *enable_reg;
 147        unsigned long           (*recalc)(struct clk *);
 148        int                     (*set_rate)(struct clk *, unsigned long);
 149        long                    (*round_rate)(struct clk *, unsigned long);
 150        void                    (*init)(struct clk *);
 151        u8                      enable_bit;
 152        s8                      usecount;
 153        u8                      fixed_div;
 154        u8                      flags;
 155        u8                      rate_offset;
 156        u8                      src_offset;
 157#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
 158        struct dentry           *dent;  /* For visible tree hierarchy */
 159#endif
 160};
 161
 162struct clk_functions {
 163        int             (*clk_enable)(struct clk *clk);
 164        void            (*clk_disable)(struct clk *clk);
 165        long            (*clk_round_rate)(struct clk *clk, unsigned long rate);
 166        int             (*clk_set_rate)(struct clk *clk, unsigned long rate);
 167        int             (*clk_set_parent)(struct clk *clk, struct clk *parent);
 168        void            (*clk_allow_idle)(struct clk *clk);
 169        void            (*clk_deny_idle)(struct clk *clk);
 170        void            (*clk_disable_unused)(struct clk *clk);
 171};
 172
 173extern int clk_init(struct clk_functions *custom_clocks);
 174extern void clk_preinit(struct clk *clk);
 175extern int clk_register(struct clk *clk);
 176extern void clk_reparent(struct clk *child, struct clk *parent);
 177extern void clk_unregister(struct clk *clk);
 178extern void propagate_rate(struct clk *clk);
 179extern void recalculate_root_clocks(void);
 180extern unsigned long followparent_recalc(struct clk *clk);
 181extern void clk_enable_init_clocks(void);
 182unsigned long omap_fixed_divisor_recalc(struct clk *clk);
 183extern struct clk *omap_clk_get_by_name(const char *name);
 184extern int omap_clk_enable_autoidle_all(void);
 185extern int omap_clk_disable_autoidle_all(void);
 186
 187extern const struct clkops clkops_null;
 188
 189extern struct clk dummy_ck;
 190
 191int omap1_clk_init(void);
 192void omap1_clk_late_init(void);
 193extern int omap1_clk_enable(struct clk *clk);
 194extern void omap1_clk_disable(struct clk *clk);
 195extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate);
 196extern int omap1_clk_set_rate(struct clk *clk, unsigned long rate);
 197extern unsigned long omap1_ckctl_recalc(struct clk *clk);
 198extern int omap1_set_sossi_rate(struct clk *clk, unsigned long rate);
 199extern unsigned long omap1_sossi_recalc(struct clk *clk);
 200extern unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk);
 201extern int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate);
 202extern int omap1_set_uart_rate(struct clk *clk, unsigned long rate);
 203extern unsigned long omap1_uart_recalc(struct clk *clk);
 204extern int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate);
 205extern long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate);
 206extern void omap1_init_ext_clk(struct clk *clk);
 207extern int omap1_select_table_rate(struct clk *clk, unsigned long rate);
 208extern long omap1_round_to_table_rate(struct clk *clk, unsigned long rate);
 209extern int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate);
 210extern long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate);
 211extern unsigned long omap1_watchdog_recalc(struct clk *clk);
 212
 213#ifdef CONFIG_OMAP_RESET_CLOCKS
 214extern void omap1_clk_disable_unused(struct clk *clk);
 215#else
 216#define omap1_clk_disable_unused        NULL
 217#endif
 218
 219struct uart_clk {
 220        struct clk      clk;
 221        unsigned long   sysc_addr;
 222};
 223
 224/* Provide a method for preventing idling some ARM IDLECT clocks */
 225struct arm_idlect1_clk {
 226        struct clk      clk;
 227        unsigned long   no_idle_count;
 228        __u8            idlect_shift;
 229};
 230
 231/* ARM_CKCTL bit shifts */
 232#define CKCTL_PERDIV_OFFSET     0
 233#define CKCTL_LCDDIV_OFFSET     2
 234#define CKCTL_ARMDIV_OFFSET     4
 235#define CKCTL_DSPDIV_OFFSET     6
 236#define CKCTL_TCDIV_OFFSET      8
 237#define CKCTL_DSPMMUDIV_OFFSET  10
 238/*#define ARM_TIMXO             12*/
 239#define EN_DSPCK                13
 240/*#define ARM_INTHCK_SEL        14*/ /* Divide-by-2 for mpu inth_ck */
 241/* DSP_CKCTL bit shifts */
 242#define CKCTL_DSPPERDIV_OFFSET  0
 243
 244/* ARM_IDLECT2 bit shifts */
 245#define EN_WDTCK        0
 246#define EN_XORPCK       1
 247#define EN_PERCK        2
 248#define EN_LCDCK        3
 249#define EN_LBCK         4 /* Not on 1610/1710 */
 250/*#define EN_HSABCK     5*/
 251#define EN_APICK        6
 252#define EN_TIMCK        7
 253#define DMACK_REQ       8
 254#define EN_GPIOCK       9 /* Not on 1610/1710 */
 255/*#define EN_LBFREECK   10*/
 256#define EN_CKOUT_ARM    11
 257
 258/* ARM_IDLECT3 bit shifts */
 259#define EN_OCPI_CK      0
 260#define EN_TC1_CK       2
 261#define EN_TC2_CK       4
 262
 263/* DSP_IDLECT2 bit shifts (0,1,2 are same as for ARM_IDLECT2) */
 264#define EN_DSPTIMCK     5
 265
 266/* Various register defines for clock controls scattered around OMAP chip */
 267#define SDW_MCLK_INV_BIT        2       /* In ULPD_CLKC_CTRL */
 268#define USB_MCLK_EN_BIT         4       /* In ULPD_CLKC_CTRL */
 269#define USB_HOST_HHC_UHOST_EN   9       /* In MOD_CONF_CTRL_0 */
 270#define SWD_ULPD_PLL_CLK_REQ    1       /* In SWD_CLK_DIV_CTRL_SEL */
 271#define COM_ULPD_PLL_CLK_REQ    1       /* In COM_CLK_DIV_CTRL_SEL */
 272#define SWD_CLK_DIV_CTRL_SEL    0xfffe0874
 273#define COM_CLK_DIV_CTRL_SEL    0xfffe0878
 274#define SOFT_REQ_REG            0xfffe0834
 275#define SOFT_REQ_REG2           0xfffe0880
 276
 277extern __u32 arm_idlect1_mask;
 278extern struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
 279
 280extern const struct clkops clkops_dspck;
 281extern const struct clkops clkops_dummy;
 282extern const struct clkops clkops_uart_16xx;
 283extern const struct clkops clkops_generic;
 284
 285/* used for passing SoC type to omap1_{select,round_to}_table_rate() */
 286extern u32 cpu_mask;
 287
 288#endif
 289
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.