linux/drivers/uio/Kconfig
<<
>>
Prefs
   1menuconfig UIO
   2        tristate "Userspace I/O drivers"
   3        help
   4          Enable this to allow the userspace driver core code to be
   5          built.  This code allows userspace programs easy access to
   6          kernel interrupts and memory locations, allowing some drivers
   7          to be written in userspace.  Note that a small kernel driver
   8          is also required for interrupt handling to work properly.
   9
  10          If you don't know what to do here, say N.
  11
  12if UIO
  13
  14config UIO_CIF
  15        tristate "generic Hilscher CIF Card driver"
  16        depends on PCI
  17        help
  18          Driver for Hilscher CIF DeviceNet and Profibus cards.  This
  19          driver requires a userspace component called cif that handles
  20          all of the heavy lifting and can be found at:
  21                <http://www.osadl.org/projects/downloads/UIO/user/>
  22
  23          To compile this driver as a module, choose M here: the module
  24          will be called uio_cif.
  25
  26config UIO_PDRV
  27        tristate "Userspace I/O platform driver"
  28        help
  29          Generic platform driver for Userspace I/O devices.
  30
  31          If you don't know what to do here, say N.
  32
  33config UIO_PDRV_GENIRQ
  34        tristate "Userspace I/O platform driver with generic IRQ handling"
  35        help
  36          Platform driver for Userspace I/O devices, including generic
  37          interrupt handling code. Shared interrupts are not supported.
  38
  39          This kernel driver requires that the matching userspace driver
  40          handles interrupts in a special way. Userspace is responsible
  41          for acknowledging the hardware device if needed, and re-enabling
  42          interrupts in the interrupt controller using the write() syscall.
  43
  44          If you don't know what to do here, say N.
  45
  46config UIO_DMEM_GENIRQ
  47        tristate "Userspace platform driver with generic irq and dynamic memory"
  48        help
  49          Platform driver for Userspace I/O devices, including generic
  50          interrupt handling code. Shared interrupts are not supported.
  51
  52          Memory regions can be specified with the same platform device
  53          resources as the UIO_PDRV drivers, but dynamic regions can also
  54          be specified.
  55          The number and size of these regions is static,
  56          but the memory allocation is not performed until
  57          the associated device file is opened. The
  58          memory is freed once the uio device is closed.
  59
  60          If you don't know what to do here, say N.
  61
  62config UIO_AEC
  63        tristate "AEC video timestamp device"
  64        depends on PCI
  65        help
  66
  67          UIO driver for the Adrienne Electronics Corporation PCI time
  68          code device.
  69
  70          This device differs from other UIO devices since it uses I/O
  71          ports instead of memory mapped I/O. In order to make it
  72          possible for UIO to work with this device a utility, uioport,
  73          can be used to read and write the ports:
  74
  75            git clone git://ifup.org/philips/uioport.git
  76
  77          If you compile this as a module, it will be called uio_aec.
  78
  79config UIO_SERCOS3
  80        tristate "Automata Sercos III PCI card driver"
  81        depends on PCI
  82        help
  83          Userspace I/O interface for the Sercos III PCI card from
  84          Automata GmbH. The userspace part of this driver will be
  85          available for download from the Automata GmbH web site.
  86
  87          Automata GmbH:        http://www.automataweb.com
  88          Sercos III interface: http://www.sercos.com
  89
  90          If you compile this as a module, it will be called uio_sercos3.
  91
  92config UIO_PCI_GENERIC
  93        tristate "Generic driver for PCI 2.3 and PCI Express cards"
  94        depends on PCI
  95        help
  96          Generic driver that you can bind, dynamically, to any
  97          PCI 2.3 compliant and PCI Express card. It is useful,
  98          primarily, for virtualization scenarios.
  99          If you compile this as a module, it will be called uio_pci_generic.
 100
 101config UIO_NETX
 102        tristate "Hilscher NetX Card driver"
 103        depends on PCI
 104        help
 105          Driver for Hilscher NetX based fieldbus cards (cifX, comX).
 106          This driver requires a userspace component that comes with the card
 107          or is available from Hilscher (http://www.hilscher.com).
 108
 109          To compile this driver as a module, choose M here; the module
 110          will be called uio_netx.
 111
 112config UIO_PRUSS
 113        tristate "Texas Instruments PRUSS driver"
 114        depends on ARCH_DAVINCI_DA850
 115        select GENERIC_ALLOCATOR
 116        help
 117          PRUSS driver for OMAPL138/DA850/AM18XX devices
 118          PRUSS driver requires user space components, examples and user space
 119          driver is available from below SVN repo - you may use anonymous login
 120
 121          https://gforge.ti.com/gf/project/pru_sw/
 122
 123          More info on API is available at below wiki
 124
 125          http://processors.wiki.ti.com/index.php/PRU_Linux_Application_Loader
 126
 127          To compile this driver as a module, choose M here: the module
 128          will be called uio_pruss.
 129
 130endif
 131
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.