linux/drivers/hwmon/Kconfig
<<
>>
Prefs
   1#
   2# Hardware monitoring chip drivers configuration
   3#
   4
   5menuconfig HWMON
   6        tristate "Hardware Monitoring support"
   7        depends on HAS_IOMEM
   8        default y
   9        help
  10          Hardware monitoring devices let you monitor the hardware health
  11          of a system. Most modern motherboards include such a device. It
  12          can include temperature sensors, voltage sensors, fan speed
  13          sensors and various additional features such as the ability to
  14          control the speed of the fans.  If you want this support you
  15          should say Y here and also to the specific driver(s) for your
  16          sensors chip(s) below.
  17
  18          To find out which specific driver(s) you need, use the
  19          sensors-detect script from the lm_sensors package.  Read
  20          <file:Documentation/hwmon/userspace-tools> for details.
  21
  22          This support can also be built as a module.  If so, the module
  23          will be called hwmon.
  24
  25if HWMON
  26
  27config HWMON_VID
  28        tristate
  29        default n
  30
  31config HWMON_DEBUG_CHIP
  32        bool "Hardware Monitoring Chip debugging messages"
  33        default n
  34        help
  35          Say Y here if you want the I2C chip drivers to produce a bunch of
  36          debug messages to the system log.  Select this if you are having
  37          a problem with I2C support and want to see more of what is going
  38          on.
  39
  40comment "Native drivers"
  41
  42config SENSORS_ABITUGURU
  43        tristate "Abit uGuru (rev 1 & 2)"
  44        depends on X86 && DMI
  45        help
  46          If you say yes here you get support for the sensor part of the first
  47          and second revision of the Abit uGuru chip. The voltage and frequency
  48          control parts of the Abit uGuru are not supported. The Abit uGuru
  49          chip can be found on Abit uGuru featuring motherboards (most modern
  50          Abit motherboards from before end 2005). For more info and a list
  51          of which motherboards have which revision see
  52          Documentation/hwmon/abituguru
  53
  54          This driver can also be built as a module.  If so, the module
  55          will be called abituguru.
  56
  57config SENSORS_ABITUGURU3
  58        tristate "Abit uGuru (rev 3)"
  59        depends on X86 && DMI
  60        help
  61          If you say yes here you get support for the sensor part of the
  62          third revision of the Abit uGuru chip. Only reading the sensors
  63          and their settings is supported. The third revision of the Abit
  64          uGuru chip can be found on recent Abit motherboards (since end
  65          2005). For more info and a list of which motherboards have which
  66          revision see Documentation/hwmon/abituguru3
  67
  68          This driver can also be built as a module.  If so, the module
  69          will be called abituguru3.
  70
  71config SENSORS_AD7314
  72        tristate "Analog Devices AD7314 and compatibles"
  73        depends on SPI
  74        help
  75          If you say yes here you get support for the Analog Devices
  76          AD7314, ADT7301 and ADT7302 temperature sensors.
  77
  78          This driver can also be built as a module. If so, the module
  79          will be called ad7314.
  80
  81config SENSORS_AD7414
  82        tristate "Analog Devices AD7414"
  83        depends on I2C
  84        help
  85          If you say yes here you get support for the Analog Devices
  86          AD7414 temperature monitoring chip.
  87
  88          This driver can also be built as a module. If so, the module
  89          will be called ad7414.
  90
  91config SENSORS_AD7418
  92        tristate "Analog Devices AD7416, AD7417 and AD7418"
  93        depends on I2C
  94        help
  95          If you say yes here you get support for the Analog Devices
  96          AD7416, AD7417 and AD7418 temperature monitoring chips.
  97
  98          This driver can also be built as a module. If so, the module
  99          will be called ad7418.
 100
 101config SENSORS_ADCXX
 102        tristate "National Semiconductor ADCxxxSxxx"
 103        depends on SPI_MASTER
 104        help
 105          If you say yes here you get support for the National Semiconductor
 106          ADC<bb><c>S<sss> chip family, where
 107          * bb  is the resolution in number of bits (8, 10, 12)
 108          * c   is the number of channels (1, 2, 4, 8)
 109          * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
 110            kSPS and 101 for 1 MSPS)
 111
 112          Examples : ADC081S101, ADC124S501, ...
 113
 114          This driver can also be built as a module.  If so, the module
 115          will be called adcxx.
 116
 117config SENSORS_ADM1021
 118        tristate "Analog Devices ADM1021 and compatibles"
 119        depends on I2C
 120        help
 121          If you say yes here you get support for Analog Devices ADM1021
 122          and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
 123          Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
 124
 125          This driver can also be built as a module.  If so, the module
 126          will be called adm1021.
 127
 128config SENSORS_ADM1025
 129        tristate "Analog Devices ADM1025 and compatibles"
 130        depends on I2C
 131        select HWMON_VID
 132        help
 133          If you say yes here you get support for Analog Devices ADM1025
 134          and Philips NE1619 sensor chips.
 135
 136          This driver can also be built as a module.  If so, the module
 137          will be called adm1025.
 138
 139config SENSORS_ADM1026
 140        tristate "Analog Devices ADM1026 and compatibles"
 141        depends on I2C
 142        select HWMON_VID
 143        help
 144          If you say yes here you get support for Analog Devices ADM1026
 145          sensor chip.
 146
 147          This driver can also be built as a module.  If so, the module
 148          will be called adm1026.
 149
 150config SENSORS_ADM1029
 151        tristate "Analog Devices ADM1029"
 152        depends on I2C
 153        help
 154          If you say yes here you get support for Analog Devices ADM1029
 155          sensor chip.
 156          Very rare chip, please let us know you use it.
 157
 158          This driver can also be built as a module.  If so, the module
 159          will be called adm1029.
 160
 161config SENSORS_ADM1031
 162        tristate "Analog Devices ADM1031 and compatibles"
 163        depends on I2C
 164        help
 165          If you say yes here you get support for Analog Devices ADM1031
 166          and ADM1030 sensor chips.
 167
 168          This driver can also be built as a module.  If so, the module
 169          will be called adm1031.
 170
 171config SENSORS_ADM9240
 172        tristate "Analog Devices ADM9240 and compatibles"
 173        depends on I2C
 174        select HWMON_VID
 175        help
 176          If you say yes here you get support for Analog Devices ADM9240,
 177          Dallas DS1780, National Semiconductor LM81 sensor chips.
 178
 179          This driver can also be built as a module.  If so, the module
 180          will be called adm9240.
 181
 182config SENSORS_ADT7410
 183        tristate "Analog Devices ADT7410/ADT7420"
 184        depends on I2C
 185        help
 186          If you say yes here you get support for the Analog Devices
 187          ADT7410 and ADT7420 temperature monitoring chips.
 188
 189          This driver can also be built as a module. If so, the module
 190          will be called adt7410.
 191
 192config SENSORS_ADT7411
 193        tristate "Analog Devices ADT7411"
 194        depends on I2C
 195        help
 196          If you say yes here you get support for the Analog Devices
 197          ADT7411 voltage and temperature monitoring chip.
 198
 199          This driver can also be built as a module. If so, the module
 200          will be called adt7411.
 201
 202config SENSORS_ADT7462
 203        tristate "Analog Devices ADT7462"
 204        depends on I2C
 205        help
 206          If you say yes here you get support for the Analog Devices
 207          ADT7462 temperature monitoring chips.
 208
 209          This driver can also be built as a module. If so, the module
 210          will be called adt7462.
 211
 212config SENSORS_ADT7470
 213        tristate "Analog Devices ADT7470"
 214        depends on I2C
 215        help
 216          If you say yes here you get support for the Analog Devices
 217          ADT7470 temperature monitoring chips.
 218
 219          This driver can also be built as a module. If so, the module
 220          will be called adt7470.
 221
 222config SENSORS_ADT7475
 223        tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
 224        depends on I2C
 225        select HWMON_VID
 226        help
 227          If you say yes here you get support for the Analog Devices
 228          ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
 229          chips.
 230
 231          This driver can also be build as a module.  If so, the module
 232          will be called adt7475.
 233
 234config SENSORS_ASC7621
 235        tristate "Andigilog aSC7621"
 236        depends on I2C
 237        help
 238          If you say yes here you get support for the aSC7621
 239          family of SMBus sensors chip found on most Intel X38, X48, X58,
 240          945, 965 and 975 desktop boards.  Currently supported chips:
 241          aSC7621
 242          aSC7621a
 243
 244          This driver can also be built as a module.  If so, the module
 245          will be called asc7621.
 246
 247config SENSORS_K8TEMP
 248        tristate "AMD Athlon64/FX or Opteron temperature sensor"
 249        depends on X86 && PCI
 250        help
 251          If you say yes here you get support for the temperature
 252          sensor(s) inside your CPU. Supported is whole AMD K8
 253          microarchitecture. Please note that you will need at least
 254          lm-sensors 2.10.1 for proper userspace support.
 255
 256          This driver can also be built as a module.  If so, the module
 257          will be called k8temp.
 258
 259config SENSORS_K10TEMP
 260        tristate "AMD Family 10h+ temperature sensor"
 261        depends on X86 && PCI
 262        help
 263          If you say yes here you get support for the temperature
 264          sensor(s) inside your CPU. Supported are later revisions of
 265          the AMD Family 10h and all revisions of the AMD Family 11h,
 266          12h (Llano), 14h (Brazos) and 15h (Bulldozer/Trinity)
 267          microarchitectures.
 268
 269          This driver can also be built as a module.  If so, the module
 270          will be called k10temp.
 271
 272config SENSORS_FAM15H_POWER
 273        tristate "AMD Family 15h processor power"
 274        depends on X86 && PCI
 275        help
 276          If you say yes here you get support for processor power
 277          information of your AMD family 15h CPU.
 278
 279          This driver can also be built as a module.  If so, the module
 280          will be called fam15h_power.
 281
 282config SENSORS_ASB100
 283        tristate "Asus ASB100 Bach"
 284        depends on X86 && I2C
 285        select HWMON_VID
 286        help
 287          If you say yes here you get support for the ASB100 Bach sensor
 288          chip found on some Asus mainboards.
 289
 290          This driver can also be built as a module.  If so, the module
 291          will be called asb100.
 292
 293config SENSORS_ATXP1
 294        tristate "Attansic ATXP1 VID controller"
 295        depends on I2C
 296        select HWMON_VID
 297        help
 298          If you say yes here you get support for the Attansic ATXP1 VID
 299          controller.
 300
 301          If your board have such a chip, you are able to control your CPU
 302          core and other voltages.
 303
 304          This driver can also be built as a module.  If so, the module
 305          will be called atxp1.
 306
 307config SENSORS_DS620
 308        tristate "Dallas Semiconductor DS620"
 309        depends on I2C
 310        help
 311          If you say yes here you get support for Dallas Semiconductor
 312          DS620 sensor chip.
 313
 314          This driver can also be built as a module.  If so, the module
 315          will be called ds620.
 316
 317config SENSORS_DS1621
 318        tristate "Dallas Semiconductor DS1621 and DS1625"
 319        depends on I2C
 320        help
 321          If you say yes here you get support for Dallas Semiconductor
 322          DS1621 and DS1625 sensor chips.
 323
 324          This driver can also be built as a module.  If so, the module
 325          will be called ds1621.
 326
 327config SENSORS_DA9052_ADC
 328        tristate "Dialog DA9052/DA9053 ADC"
 329        depends on PMIC_DA9052
 330        help
 331          Say y here to support the ADC found on Dialog Semiconductor
 332          DA9052-BC and DA9053-AA/Bx PMICs.
 333
 334          This driver can also be built as module. If so, the module
 335          will be called da9052-hwmon.
 336
 337config SENSORS_DA9055
 338        tristate "Dialog Semiconductor DA9055 ADC"
 339        depends on MFD_DA9055
 340        help
 341          If you say yes here you get support for ADC on the Dialog
 342          Semiconductor DA9055 PMIC.
 343
 344          This driver can also be built as a module.  If so, the module
 345          will be called da9055-hwmon.
 346
 347config SENSORS_I5K_AMB
 348        tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
 349        depends on PCI
 350        help
 351          If you say yes here you get support for FB-DIMM AMB temperature
 352          monitoring chips on systems with the Intel 5000 series chipset.
 353
 354          This driver can also be built as a module. If so, the module
 355          will be called i5k_amb.
 356
 357config SENSORS_F71805F
 358        tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
 359        depends on !PPC
 360        help
 361          If you say yes here you get support for hardware monitoring
 362          features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
 363          Super-I/O chips.
 364
 365          This driver can also be built as a module.  If so, the module
 366          will be called f71805f.
 367
 368config SENSORS_F71882FG
 369        tristate "Fintek F71882FG and compatibles"
 370        depends on !PPC
 371        help
 372          If you say yes here you get support for hardware monitoring
 373          features of many Fintek Super-I/O (LPC) chips. The currently
 374          supported chips are:
 375            F71808E/A
 376            F71858FG
 377            F71862FG
 378            F71863FG
 379            F71869F/E/A
 380            F71882FG
 381            F71883FG
 382            F71889FG/ED/A
 383            F8000
 384            F81801U
 385            F81865F
 386
 387          This driver can also be built as a module.  If so, the module
 388          will be called f71882fg.
 389
 390config SENSORS_F75375S
 391        tristate "Fintek F75375S/SP, F75373 and F75387"
 392        depends on I2C
 393        help
 394          If you say yes here you get support for hardware monitoring
 395          features of the Fintek F75375S/SP, F75373 and F75387
 396
 397          This driver can also be built as a module.  If so, the module
 398          will be called f75375s.
 399
 400config SENSORS_FSCHMD
 401        tristate "Fujitsu Siemens Computers sensor chips"
 402        depends on X86 && I2C
 403        help
 404          If you say yes here you get support for the following Fujitsu
 405          Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
 406          Heimdall, Heracles, Hades and Syleus including support for the
 407          integrated watchdog.
 408
 409          This is a merged driver for FSC sensor chips replacing the fscpos,
 410          fscscy and fscher drivers and adding support for several other FSC
 411          sensor chips.
 412
 413          This driver can also be built as a module.  If so, the module
 414          will be called fschmd.
 415
 416config SENSORS_G760A
 417        tristate "GMT G760A"
 418        depends on I2C
 419        help
 420          If you say yes here you get support for Global Mixed-mode
 421          Technology Inc G760A fan speed PWM controller chips.
 422
 423          This driver can also be built as a module.  If so, the module
 424          will be called g760a.
 425
 426config SENSORS_GL518SM
 427        tristate "Genesys Logic GL518SM"
 428        depends on I2C
 429        help
 430          If you say yes here you get support for Genesys Logic GL518SM
 431          sensor chips.
 432
 433          This driver can also be built as a module.  If so, the module
 434          will be called gl518sm.
 435
 436config SENSORS_GL520SM
 437        tristate "Genesys Logic GL520SM"
 438        depends on I2C
 439        select HWMON_VID
 440        help
 441          If you say yes here you get support for Genesys Logic GL520SM
 442          sensor chips.
 443
 444          This driver can also be built as a module.  If so, the module
 445          will be called gl520sm.
 446
 447config SENSORS_GPIO_FAN
 448        tristate "GPIO fan"
 449        depends on GPIOLIB
 450        help
 451          If you say yes here you get support for fans connected to GPIO lines.
 452
 453          This driver can also be built as a module.  If so, the module
 454          will be called gpio-fan.
 455
 456config SENSORS_HIH6130
 457        tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor"
 458        depends on I2C
 459        help
 460          If you say yes here you get support for Honeywell Humidicon
 461          HIH-6130 and HIH-6131 Humidicon humidity sensors.
 462
 463          This driver can also be built as a module.  If so, the module
 464          will be called hih6130.
 465
 466config SENSORS_CORETEMP
 467        tristate "Intel Core/Core2/Atom temperature sensor"
 468        depends on X86
 469        help
 470          If you say yes here you get support for the temperature
 471          sensor inside your CPU. Most of the family 6 CPUs
 472          are supported. Check Documentation/hwmon/coretemp for details.
 473
 474config SENSORS_IBMAEM
 475        tristate "IBM Active Energy Manager temperature/power sensors and control"
 476        select IPMI_SI
 477        depends on IPMI_HANDLER
 478        help
 479          If you say yes here you get support for the temperature and
 480          power sensors and capping hardware in various IBM System X
 481          servers that support Active Energy Manager.  This includes
 482          the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
 483          and certain HC10/HS2x/LS2x/QS2x blades.
 484
 485          This driver can also be built as a module.  If so, the module
 486          will be called ibmaem.
 487
 488config SENSORS_IBMPEX
 489        tristate "IBM PowerExecutive temperature/power sensors"
 490        select IPMI_SI
 491        depends on IPMI_HANDLER
 492        help
 493          If you say yes here you get support for the temperature and
 494          power sensors in various IBM System X servers that support
 495          PowerExecutive.  So far this includes the x3350, x3550, x3650,
 496          x3655, and x3755; the x3800, x3850, and x3950 models that have
 497          PCI Express; and some of the HS2x, LS2x, and QS2x blades.
 498
 499          This driver can also be built as a module.  If so, the module
 500          will be called ibmpex.
 501
 502config SENSORS_IT87
 503        tristate "ITE IT87xx and compatibles"
 504        depends on !PPC
 505        select HWMON_VID
 506        help
 507          If you say yes here you get support for ITE IT8705F, IT8712F,
 508          IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E,
 509          IT8771E, IT8772E, IT8782F, and IT8783E/F sensor chips, and the
 510          SiS950 clone.
 511
 512          This driver can also be built as a module.  If so, the module
 513          will be called it87.
 514
 515config SENSORS_JZ4740
 516        tristate "Ingenic JZ4740 SoC ADC driver"
 517        depends on MACH_JZ4740 && MFD_JZ4740_ADC
 518        help
 519          If you say yes here you get support for reading adc values from the ADCIN
 520          pin on Ingenic JZ4740 SoC based boards.
 521
 522          This driver can also be build as a module. If so, the module will be
 523          called jz4740-hwmon.
 524
 525config SENSORS_JC42
 526        tristate "JEDEC JC42.4 compliant memory module temperature sensors"
 527        depends on I2C
 528        help
 529          If you say yes here, you get support for JEDEC JC42.4 compliant
 530          temperature sensors, which are used on many DDR3 memory modules for
 531          mobile devices and servers.  Support will include, but not be limited
 532          to, ADT7408, AT30TS00, CAT34TS02, CAT6095, MAX6604, MCP9804, MCP9805,
 533          MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98, STTS424(E),
 534          STTS2002, STTS3000, TSE2002B3, TSE2002GB2, TS3000B3, and TS3000GB2.
 535
 536          This driver can also be built as a module.  If so, the module
 537          will be called jc42.
 538
 539config SENSORS_LINEAGE
 540        tristate "Lineage Compact Power Line Power Entry Module"
 541        depends on I2C
 542        help
 543          If you say yes here you get support for the Lineage Compact Power Line
 544          series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
 545          CP2000DC, CP2725, and others.
 546
 547          This driver can also be built as a module.  If so, the module
 548          will be called lineage-pem.
 549
 550config SENSORS_LM63
 551        tristate "National Semiconductor LM63 and compatibles"
 552        depends on I2C
 553        help
 554          If you say yes here you get support for the National
 555          Semiconductor LM63, LM64, and LM96163 remote diode digital temperature
 556          sensors with integrated fan control.  Such chips are found
 557          on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
 558          others.
 559
 560          This driver can also be built as a module.  If so, the module
 561          will be called lm63.
 562
 563config SENSORS_LM70
 564        tristate "National Semiconductor LM70 and compatibles"
 565        depends on SPI_MASTER
 566        help
 567          If you say yes here you get support for the National Semiconductor
 568          LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera-
 569          ture sensor chips.
 570
 571          This driver can also be built as a module.  If so, the module
 572          will be called lm70.
 573
 574config SENSORS_LM73
 575        tristate "National Semiconductor LM73"
 576        depends on I2C
 577        help
 578          If you say yes here you get support for National Semiconductor LM73
 579          sensor chips.
 580          This driver can also be built as a module.  If so, the module
 581          will be called lm73.
 582
 583config SENSORS_LM75
 584        tristate "National Semiconductor LM75 and compatibles"
 585        depends on I2C
 586        help
 587          If you say yes here you get support for one common type of
 588          temperature sensor chip, with models including:
 589
 590                - Analog Devices ADT75
 591                - Dallas Semiconductor DS75 and DS1775
 592                - Maxim MAX6625 and MAX6626
 593                - Microchip MCP980x
 594                - National Semiconductor LM75, LM75A
 595                - NXP's LM75A
 596                - ST Microelectronics STDS75
 597                - TelCom (now Microchip) TCN75
 598                - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
 599                  TMP275
 600
 601          This driver supports driver model based binding through board
 602          specific I2C device tables.
 603
 604          It also supports the "legacy" style of driver binding.  To use
 605          that with some chips which don't replicate LM75 quirks exactly,
 606          you may need the "force" module parameter.
 607
 608          This driver can also be built as a module.  If so, the module
 609          will be called lm75.
 610
 611config SENSORS_LM77
 612        tristate "National Semiconductor LM77"
 613        depends on I2C
 614        help
 615          If you say yes here you get support for National Semiconductor LM77
 616          sensor chips.
 617
 618          This driver can also be built as a module.  If so, the module
 619          will be called lm77.
 620
 621config SENSORS_LM78
 622        tristate "National Semiconductor LM78 and compatibles"
 623        depends on I2C
 624        select HWMON_VID
 625        help
 626          If you say yes here you get support for National Semiconductor LM78,
 627          LM78-J and LM79.
 628
 629          This driver can also be built as a module.  If so, the module
 630          will be called lm78.
 631
 632config SENSORS_LM80
 633        tristate "National Semiconductor LM80 and LM96080"
 634        depends on I2C
 635        help
 636          If you say yes here you get support for National Semiconductor
 637          LM80 and LM96080 sensor chips.
 638
 639          This driver can also be built as a module.  If so, the module
 640          will be called lm80.
 641
 642config SENSORS_LM83
 643        tristate "National Semiconductor LM83 and compatibles"
 644        depends on I2C
 645        help
 646          If you say yes here you get support for National Semiconductor
 647          LM82 and LM83 sensor chips.
 648
 649          This driver can also be built as a module.  If so, the module
 650          will be called lm83.
 651
 652config SENSORS_LM85
 653        tristate "National Semiconductor LM85 and compatibles"
 654        depends on I2C
 655        select HWMON_VID
 656        help
 657          If you say yes here you get support for National Semiconductor LM85
 658          sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
 659          EMC6D101, EMC6D102, and EMC6D103.
 660
 661          This driver can also be built as a module.  If so, the module
 662          will be called lm85.
 663
 664config SENSORS_LM87
 665        tristate "National Semiconductor LM87 and compatibles"
 666        depends on I2C
 667        select HWMON_VID
 668        help
 669          If you say yes here you get support for National Semiconductor LM87
 670          and Analog Devices ADM1024 sensor chips.
 671
 672          This driver can also be built as a module.  If so, the module
 673          will be called lm87.
 674
 675config SENSORS_LM90
 676        tristate "National Semiconductor LM90 and compatibles"
 677        depends on I2C
 678        help
 679          If you say yes here you get support for National Semiconductor LM90,
 680          LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
 681          Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
 682          MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
 683          Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, and GMT G781
 684          sensor chips.
 685
 686          This driver can also be built as a module.  If so, the module
 687          will be called lm90.
 688
 689config SENSORS_LM92
 690        tristate "National Semiconductor LM92 and compatibles"
 691        depends on I2C
 692        help
 693          If you say yes here you get support for National Semiconductor LM92
 694          and Maxim MAX6635 sensor chips.
 695
 696          This driver can also be built as a module.  If so, the module
 697          will be called lm92.
 698
 699config SENSORS_LM93
 700        tristate "National Semiconductor LM93 and compatibles"
 701        depends on I2C
 702        select HWMON_VID
 703        help
 704          If you say yes here you get support for National Semiconductor LM93,
 705          LM94, and compatible sensor chips.
 706
 707          This driver can also be built as a module.  If so, the module
 708          will be called lm93.
 709
 710config SENSORS_LTC4151
 711        tristate "Linear Technology LTC4151"
 712        depends on I2C
 713        default n
 714        help
 715          If you say yes here you get support for Linear Technology LTC4151
 716          High Voltage I2C Current and Voltage Monitor interface.
 717
 718          This driver can also be built as a module. If so, the module will
 719          be called ltc4151.
 720
 721config SENSORS_LTC4215
 722        tristate "Linear Technology LTC4215"
 723        depends on I2C
 724        default n
 725        help
 726          If you say yes here you get support for Linear Technology LTC4215
 727          Hot Swap Controller I2C interface.
 728
 729          This driver can also be built as a module. If so, the module will
 730          be called ltc4215.
 731
 732config SENSORS_LTC4245
 733        tristate "Linear Technology LTC4245"
 734        depends on I2C
 735        default n
 736        help
 737          If you say yes here you get support for Linear Technology LTC4245
 738          Multiple Supply Hot Swap Controller I2C interface.
 739
 740          This driver can also be built as a module. If so, the module will
 741          be called ltc4245.
 742
 743config SENSORS_LTC4261
 744        tristate "Linear Technology LTC4261"
 745        depends on I2C
 746        default n
 747        help
 748          If you say yes here you get support for Linear Technology LTC4261
 749          Negative Voltage Hot Swap Controller I2C interface.
 750
 751          This driver can also be built as a module. If so, the module will
 752          be called ltc4261.
 753
 754config SENSORS_LM95241
 755        tristate "National Semiconductor LM95241 and compatibles"
 756        depends on I2C
 757        help
 758          If you say yes here you get support for LM95231 and LM95241 sensor
 759          chips.
 760
 761          This driver can also be built as a module.  If so, the module
 762          will be called lm95241.
 763
 764config SENSORS_LM95245
 765        tristate "National Semiconductor LM95245 sensor chip"
 766        depends on I2C
 767        help
 768          If you say yes here you get support for LM95245 sensor chip.
 769
 770          This driver can also be built as a module.  If so, the module
 771          will be called lm95245.
 772
 773config SENSORS_MAX1111
 774        tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles"
 775        depends on SPI_MASTER
 776        help
 777          Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113
 778          ADC chips.
 779
 780          This driver can also be built as a module.  If so, the module
 781          will be called max1111.
 782
 783config SENSORS_MAX16065
 784        tristate "Maxim MAX16065 System Manager and compatibles"
 785        depends on I2C
 786        help
 787          If you say yes here you get support for hardware monitoring
 788          capabilities of the following Maxim System Manager chips.
 789            MAX16065
 790            MAX16066
 791            MAX16067
 792            MAX16068
 793            MAX16070
 794            MAX16071
 795
 796          This driver can also be built as a module.  If so, the module
 797          will be called max16065.
 798
 799config SENSORS_MAX1619
 800        tristate "Maxim MAX1619 sensor chip"
 801        depends on I2C
 802        help
 803          If you say yes here you get support for MAX1619 sensor chip.
 804
 805          This driver can also be built as a module.  If so, the module
 806          will be called max1619.
 807
 808config SENSORS_MAX1668
 809        tristate "Maxim MAX1668 and compatibles"
 810        depends on I2C
 811        help
 812          If you say yes here you get support for MAX1668, MAX1989 and
 813          MAX1805 chips.
 814
 815          This driver can also be built as a module.  If so, the module
 816          will be called max1668.
 817
 818config SENSORS_MAX197
 819        tristate "Maxim MAX197 and compatibles"
 820        help
 821          Support for the Maxim MAX197 A/D converter.
 822          Support will include, but not be limited to, MAX197, and MAX199.
 823
 824          This driver can also be built as a module. If so, the module
 825          will be called max197.
 826
 827config SENSORS_MAX6639
 828        tristate "Maxim MAX6639 sensor chip"
 829        depends on I2C
 830        help
 831          If you say yes here you get support for the MAX6639
 832          sensor chips.
 833
 834          This driver can also be built as a module.  If so, the module
 835          will be called max6639.
 836
 837config SENSORS_MAX6642
 838        tristate "Maxim MAX6642 sensor chip"
 839        depends on I2C
 840        help
 841          If you say yes here you get support for MAX6642 sensor chip.
 842          MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
 843          with Overtemperature Alarm from Maxim.
 844
 845          This driver can also be built as a module.  If so, the module
 846          will be called max6642.
 847
 848config SENSORS_MAX6650
 849        tristate "Maxim MAX6650 sensor chip"
 850        depends on I2C
 851        help
 852          If you say yes here you get support for the MAX6650 / MAX6651
 853          sensor chips.
 854
 855          This driver can also be built as a module.  If so, the module
 856          will be called max6650.
 857
 858config SENSORS_MAX6697
 859        tristate "Maxim MAX6697 and compatibles"
 860        depends on I2C
 861        help
 862          If you say yes here you get support for MAX6581, MAX6602, MAX6622,
 863          MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699
 864          temperature sensor chips.
 865
 866          This driver can also be built as a module.  If so, the module
 867          will be called max6697.
 868
 869config SENSORS_MCP3021
 870        tristate "Microchip MCP3021 and compatibles"
 871        depends on I2C
 872        help
 873          If you say yes here you get support for MCP3021 and MCP3221.
 874          The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221
 875          with 12-bit resolution.
 876
 877          This driver can also be built as a module.  If so, the module
 878          will be called mcp3021.
 879
 880config SENSORS_NTC_THERMISTOR
 881        tristate "NTC thermistor support"
 882        help
 883          This driver supports NTC thermistors sensor reading and its
 884          interpretation. The driver can also monitor the temperature and
 885          send notifications about the temperature.
 886
 887          Currently, this driver supports
 888          NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333.
 889
 890          This driver can also be built as a module.  If so, the module
 891          will be called ntc-thermistor.
 892
 893config SENSORS_PC87360
 894        tristate "National Semiconductor PC87360 family"
 895        depends on !PPC
 896        select HWMON_VID
 897        help
 898          If you say yes here you get access to the hardware monitoring
 899          functions of the National Semiconductor PC8736x Super-I/O chips.
 900          The PC87360, PC87363 and PC87364 only have fan monitoring and
 901          control.  The PC87365 and PC87366 additionally have voltage and
 902          temperature monitoring.
 903
 904          This driver can also be built as a module.  If so, the module
 905          will be called pc87360.
 906
 907config SENSORS_PC87427
 908        tristate "National Semiconductor PC87427"
 909        depends on !PPC
 910        help
 911          If you say yes here you get access to the hardware monitoring
 912          functions of the National Semiconductor PC87427 Super-I/O chip.
 913          The chip has two distinct logical devices, one for fan speed
 914          monitoring and control, and one for voltage and temperature
 915          monitoring. Fan speed monitoring and control are supported, as
 916          well as temperature monitoring. Voltages aren't supported yet.
 917
 918          This driver can also be built as a module.  If so, the module
 919          will be called pc87427.
 920
 921config SENSORS_PCF8591
 922        tristate "Philips PCF8591 ADC/DAC"
 923        depends on I2C
 924        default n
 925        help
 926          If you say yes here you get support for Philips PCF8591 4-channel
 927          ADC, 1-channel DAC chips.
 928
 929          This driver can also be built as a module.  If so, the module
 930          will be called pcf8591.
 931
 932          These devices are hard to detect and rarely found on mainstream
 933          hardware.  If unsure, say N.
 934
 935source drivers/hwmon/pmbus/Kconfig
 936
 937config SENSORS_SHT15
 938        tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
 939        depends on GPIOLIB
 940        help
 941          If you say yes here you get support for the Sensiron SHT10, SHT11,
 942          SHT15, SHT71, SHT75 humidity and temperature sensors.
 943
 944          This driver can also be built as a module.  If so, the module
 945          will be called sht15.
 946
 947config SENSORS_SHT21
 948        tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
 949        depends on I2C
 950        help
 951          If you say yes here you get support for the Sensiron SHT21, SHT25
 952          humidity and temperature sensors.
 953
 954          This driver can also be built as a module.  If so, the module
 955          will be called sht21.
 956
 957config SENSORS_S3C
 958        tristate "Samsung built-in ADC"
 959        depends on S3C_ADC
 960        help
 961          If you say yes here you get support for the on-board ADCs of
 962          the Samsung S3C24XX, S3C64XX and other series of SoC
 963
 964          This driver can also be built as a module. If so, the module
 965          will be called s3c-hwmon.
 966
 967config SENSORS_S3C_RAW
 968        bool "Include raw channel attributes in sysfs"
 969        depends on SENSORS_S3C
 970        help
 971          Say Y here if you want to include raw copies of all the ADC
 972          channels in sysfs.
 973
 974config SENSORS_SIS5595
 975        tristate "Silicon Integrated Systems Corp. SiS5595"
 976        depends on PCI
 977        help
 978          If you say yes here you get support for the integrated sensors in
 979          SiS5595 South Bridges.
 980
 981          This driver can also be built as a module.  If so, the module
 982          will be called sis5595.
 983
 984config SENSORS_SMM665
 985        tristate "Summit Microelectronics SMM665"
 986        depends on I2C
 987        default n
 988        help
 989          If you say yes here you get support for the hardware monitoring
 990          features of the Summit Microelectronics SMM665/SMM665B Six-Channel
 991          Active DC Output Controller / Monitor.
 992
 993          Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
 994          Support for those chips is untested.
 995
 996          This driver can also be built as a module. If so, the module will
 997          be called smm665.
 998
 999config SENSORS_DME1737
1000        tristate "SMSC DME1737, SCH311x and compatibles"
1001        depends on I2C && !PPC
1002        select HWMON_VID
1003        help
1004          If you say yes here you get support for the hardware monitoring
1005          and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
1006          Asus A8000 Super-I/O chips.
1007
1008          This driver can also be built as a module.  If so, the module
1009          will be called dme1737.
1010
1011config SENSORS_EMC1403
1012        tristate "SMSC EMC1403/23 thermal sensor"
1013        depends on I2C
1014        help
1015          If you say yes here you get support for the SMSC EMC1403/23
1016          temperature monitoring chip.
1017
1018          Threshold values can be configured using sysfs.
1019          Data from the different diodes are accessible via sysfs.
1020
1021config SENSORS_EMC2103
1022        tristate "SMSC EMC2103"
1023        depends on I2C
1024        help
1025          If you say yes here you get support for the temperature
1026          and fan sensors of the SMSC EMC2103 chips.
1027
1028          This driver can also be built as a module.  If so, the module
1029          will be called emc2103.
1030
1031config SENSORS_EMC6W201
1032        tristate "SMSC EMC6W201"
1033        depends on I2C
1034        help
1035          If you say yes here you get support for the SMSC EMC6W201
1036          hardware monitoring chip.
1037
1038          This driver can also be built as a module.  If so, the module
1039          will be called emc6w201.
1040
1041config SENSORS_SMSC47M1
1042        tristate "SMSC LPC47M10x and compatibles"
1043        depends on !PPC
1044        help
1045          If you say yes here you get support for the integrated fan
1046          monitoring and control capabilities of the SMSC LPC47B27x,
1047          LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
1048          LPC47M192, LPC47M292 and LPC47M997 chips.
1049
1050          The temperature and voltage sensor features of the LPC47M15x,
1051          LPC47M192, LPC47M292 and LPC47M997 are supported by another
1052          driver, select also "SMSC LPC47M192 and compatibles" below for
1053          those.
1054
1055          This driver can also be built as a module.  If so, the module
1056          will be called smsc47m1.
1057
1058config SENSORS_SMSC47M192
1059        tristate "SMSC LPC47M192 and compatibles"
1060        depends on I2C
1061        select HWMON_VID
1062        help
1063          If you say yes here you get support for the temperature and
1064          voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
1065          and LPC47M997 chips.
1066
1067          The fan monitoring and control capabilities of these chips
1068          are supported by another driver, select
1069          "SMSC LPC47M10x and compatibles" above. You need both drivers
1070          if you want fan control and voltage/temperature sensor support.
1071
1072          This driver can also be built as a module.  If so, the module
1073          will be called smsc47m192.
1074
1075config SENSORS_SMSC47B397
1076        tristate "SMSC LPC47B397-NC"
1077        depends on !PPC
1078        help
1079          If you say yes here you get support for the SMSC LPC47B397-NC
1080          sensor chip.
1081
1082          This driver can also be built as a module.  If so, the module
1083          will be called smsc47b397.
1084
1085config SENSORS_SCH56XX_COMMON
1086        tristate
1087        default n
1088
1089config SENSORS_SCH5627
1090        tristate "SMSC SCH5627"
1091        depends on !PPC && WATCHDOG
1092        select SENSORS_SCH56XX_COMMON
1093        select WATCHDOG_CORE
1094        help
1095          If you say yes here you get support for the hardware monitoring
1096          features of the SMSC SCH5627 Super-I/O chip including support for
1097          the integrated watchdog.
1098
1099          This driver can also be built as a module.  If so, the module
1100          will be called sch5627.
1101
1102config SENSORS_SCH5636
1103        tristate "SMSC SCH5636"
1104        depends on !PPC && WATCHDOG
1105        select SENSORS_SCH56XX_COMMON
1106        select WATCHDOG_CORE
1107        help
1108          SMSC SCH5636 Super I/O chips include an embedded microcontroller for
1109          hardware monitoring solutions, allowing motherboard manufacturers to
1110          create their own custom hwmon solution based upon the SCH5636.
1111
1112          Currently this driver only supports the Fujitsu Theseus SCH5636 based
1113          hwmon solution. Say yes here if you want support for the Fujitsu
1114          Theseus' hardware monitoring features including support for the
1115          integrated watchdog.
1116
1117          This driver can also be built as a module.  If so, the module
1118          will be called sch5636.
1119
1120config SENSORS_ADS1015
1121        tristate "Texas Instruments ADS1015"
1122        depends on I2C
1123        help
1124          If you say yes here you get support for Texas Instruments ADS1015
1125          12-bit 4-input ADC device.
1126
1127          This driver can also be built as a module.  If so, the module
1128          will be called ads1015.
1129
1130config SENSORS_ADS7828
1131        tristate "Texas Instruments ADS7828 and compatibles"
1132        depends on I2C
1133        help
1134          If you say yes here you get support for Texas Instruments ADS7828 and
1135          ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while
1136          it is 8-bit on ADS7830.
1137
1138          This driver can also be built as a module.  If so, the module
1139          will be called ads7828.
1140
1141config SENSORS_ADS7871
1142        tristate "Texas Instruments ADS7871 A/D converter"
1143        depends on SPI
1144        help
1145          If you say yes here you get support for TI ADS7871 & ADS7870
1146
1147          This driver can also be built as a module.  If so, the module
1148          will be called ads7871.
1149
1150config SENSORS_AMC6821
1151        tristate "Texas Instruments AMC6821"
1152        depends on I2C 
1153        help
1154          If you say yes here you get support for the Texas Instruments
1155          AMC6821 hardware monitoring chips.
1156
1157          This driver can also be build as a module.  If so, the module
1158          will be called amc6821.
1159
1160config SENSORS_INA209
1161        tristate "TI / Burr Brown INA209"
1162        depends on I2C
1163        help
1164          If you say yes here you get support for the TI / Burr Brown INA209
1165          voltage / current / power monitor I2C interface.
1166
1167          This driver can also be built as a module. If so, the module will
1168          be called ina209.
1169
1170config SENSORS_INA2XX
1171        tristate "Texas Instruments INA219 and compatibles"
1172        depends on I2C
1173        help
1174          If you say yes here you get support for INA219, INA220, INA226, and
1175          INA230 power monitor chips.
1176
1177          The INA2xx driver is configured for the default configuration of
1178          the part as described in the datasheet.
1179          Default value for Rshunt is 10 mOhms.
1180          This driver can also be built as a module.  If so, the module
1181          will be called ina2xx.
1182
1183config SENSORS_THMC50
1184        tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
1185        depends on I2C
1186        help
1187          If you say yes here you get support for Texas Instruments THMC50
1188          sensor chips and clones: the Analog Devices ADM1022.
1189
1190          This driver can also be built as a module.  If so, the module
1191          will be called thmc50.
1192
1193config SENSORS_TMP102
1194        tristate "Texas Instruments TMP102"
1195        depends on I2C
1196        help
1197          If you say yes here you get support for Texas Instruments TMP102
1198          sensor chips.
1199
1200          This driver can also be built as a module.  If so, the module
1201          will be called tmp102.
1202
1203config SENSORS_TMP401
1204        tristate "Texas Instruments TMP401 and compatibles"
1205        depends on I2C
1206        help
1207          If you say yes here you get support for Texas Instruments TMP401 and
1208          TMP411 temperature sensor chips.
1209
1210          This driver can also be built as a module.  If so, the module
1211          will be called tmp401.
1212
1213config SENSORS_TMP421
1214        tristate "Texas Instruments TMP421 and compatible"
1215        depends on I2C
1216        help
1217          If you say yes here you get support for Texas Instruments TMP421,
1218          TMP422 and TMP423 temperature sensor chips.
1219
1220          This driver can also be built as a module.  If so, the module
1221          will be called tmp421.
1222
1223config SENSORS_TWL4030_MADC
1224        tristate "Texas Instruments TWL4030 MADC Hwmon"
1225        depends on TWL4030_MADC
1226        help
1227        If you say yes here you get hwmon support for triton
1228        TWL4030-MADC.
1229
1230        This driver can also be built as a module. If so it will be called
1231        twl4030-madc-hwmon.
1232
1233config SENSORS_VEXPRESS
1234        tristate "Versatile Express"
1235        depends on VEXPRESS_CONFIG
1236        help
1237          This driver provides support for hardware sensors available on
1238          the ARM Ltd's Versatile Express platform. It can provide wide
1239          range of information like temperature, power, energy.
1240
1241config SENSORS_VIA_CPUTEMP
1242        tristate "VIA CPU temperature sensor"
1243        depends on X86
1244        select HWMON_VID
1245        help
1246          If you say yes here you get support for the temperature
1247          sensor inside your CPU. Supported are all known variants of
1248          the VIA C7 and Nano.
1249
1250config SENSORS_VIA686A
1251        tristate "VIA686A"
1252        depends on PCI
1253        help
1254          If you say yes here you get support for the integrated sensors in
1255          Via 686A/B South Bridges.
1256
1257          This driver can also be built as a module.  If so, the module
1258          will be called via686a.
1259
1260config SENSORS_VT1211
1261        tristate "VIA VT1211"
1262        depends on !PPC
1263        select HWMON_VID
1264        help
1265          If you say yes here then you get support for hardware monitoring
1266          features of the VIA VT1211 Super-I/O chip.
1267
1268          This driver can also be built as a module.  If so, the module
1269          will be called vt1211.
1270
1271config SENSORS_VT8231
1272        tristate "VIA VT8231"
1273        depends on PCI
1274        select HWMON_VID
1275        help
1276          If you say yes here then you get support for the integrated sensors
1277          in the VIA VT8231 device.
1278
1279          This driver can also be built as a module.  If so, the module
1280          will be called vt8231.
1281
1282config SENSORS_W83781D
1283        tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
1284        depends on I2C
1285        select HWMON_VID
1286        help
1287          If you say yes here you get support for the Winbond W8378x series
1288          of sensor chips: the W83781D, W83782D and W83783S, and the similar
1289          Asus AS99127F.
1290
1291          This driver can also be built as a module.  If so, the module
1292          will be called w83781d.
1293
1294config SENSORS_W83791D
1295        tristate "Winbond W83791D"
1296        depends on I2C
1297        select HWMON_VID
1298        help
1299          If you say yes here you get support for the Winbond W83791D chip.
1300
1301          This driver can also be built as a module.  If so, the module
1302          will be called w83791d.
1303
1304config SENSORS_W83792D
1305        tristate "Winbond W83792D"
1306        depends on I2C
1307        help
1308          If you say yes here you get support for the Winbond W83792D chip.
1309
1310          This driver can also be built as a module.  If so, the module
1311          will be called w83792d.
1312
1313config SENSORS_W83793
1314        tristate "Winbond W83793"
1315        depends on I2C
1316        select HWMON_VID
1317        help
1318          If you say yes here you get support for the Winbond W83793
1319          hardware monitoring chip, including support for the integrated
1320          watchdog.
1321
1322          This driver can also be built as a module.  If so, the module
1323          will be called w83793.
1324
1325config SENSORS_W83795
1326        tristate "Winbond/Nuvoton W83795G/ADG"
1327        depends on I2C
1328        help
1329          If you say yes here you get support for the Winbond W83795G and
1330          W83795ADG hardware monitoring chip, including manual fan speed
1331          control.
1332
1333          This driver can also be built as a module.  If so, the module
1334          will be called w83795.
1335
1336config SENSORS_W83795_FANCTRL
1337        boolean "Include automatic fan control support (DANGEROUS)"
1338        depends on SENSORS_W83795
1339        default n
1340        help
1341          If you say yes here, support for automatic fan speed control
1342          will be included in the driver.
1343
1344          This part of the code wasn't carefully reviewed and tested yet,
1345          so enabling this option is strongly discouraged on production
1346          servers. Only developers and testers should enable it for the
1347          time being.
1348
1349          Please also note that this option will create sysfs attribute
1350          files which may change in the future, so you shouldn't rely
1351          on them being stable.
1352
1353config SENSORS_W83L785TS
1354        tristate "Winbond W83L785TS-S"
1355        depends on I2C
1356        help
1357          If you say yes here you get support for the Winbond W83L785TS-S
1358          sensor chip, which is used on the Asus A7N8X, among other
1359          motherboards.
1360
1361          This driver can also be built as a module.  If so, the module
1362          will be called w83l785ts.
1363
1364config SENSORS_W83L786NG
1365        tristate "Winbond W83L786NG, W83L786NR"
1366        depends on I2C
1367        help
1368          If you say yes here you get support for the Winbond W83L786NG
1369          and W83L786NR sensor chips.
1370
1371          This driver can also be built as a module.  If so, the module
1372          will be called w83l786ng.
1373
1374config SENSORS_W83627HF
1375        tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
1376        depends on !PPC
1377        select HWMON_VID
1378        help
1379          If you say yes here you get support for the Winbond W836X7 series
1380          of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
1381          W83697HF.
1382
1383          This driver can also be built as a module.  If so, the module
1384          will be called w83627hf.
1385
1386config SENSORS_W83627EHF
1387        tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F"
1388        depends on !PPC
1389        select HWMON_VID
1390        help
1391          If you say yes here you get support for the hardware
1392          monitoring functionality of the Winbond W83627EHF Super-I/O chip.
1393
1394          This driver also supports the W83627EHG, which is the lead-free
1395          version of the W83627EHF, and the W83627DHG, which is a similar
1396          chip suited for specific Intel processors that use PECI such as
1397          the Core 2 Duo. And also the W83627UHG, which is a stripped down
1398          version of the W83627DHG (as far as hardware monitoring goes.)
1399
1400          This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
1401          (also known as W83667HG-I), and NCT6776F.
1402
1403          This driver can also be built as a module.  If so, the module
1404          will be called w83627ehf.
1405
1406config SENSORS_WM831X
1407        tristate "WM831x PMICs"
1408        depends on MFD_WM831X
1409        help
1410          If you say yes here you get support for the hardware
1411          monitoring functionality of the Wolfson Microelectronics
1412          WM831x series of PMICs.
1413
1414          This driver can also be built as a module.  If so, the module
1415          will be called wm831x-hwmon.
1416
1417config SENSORS_WM8350
1418        tristate "Wolfson Microelectronics WM835x"
1419        depends on MFD_WM8350
1420        help
1421          If you say yes here you get support for the hardware
1422          monitoring features of the WM835x series of PMICs.
1423
1424          This driver can also be built as a module.  If so, the module
1425          will be called wm8350-hwmon.
1426
1427config SENSORS_ULTRA45
1428        tristate "Sun Ultra45 PIC16F747"
1429        depends on SPARC64
1430        help
1431          This driver provides support for the Ultra45 workstation environmental
1432          sensors.
1433
1434config SENSORS_APPLESMC
1435        tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
1436        depends on INPUT && X86
1437        select NEW_LEDS
1438        select LEDS_CLASS
1439        select INPUT_POLLDEV
1440        default n
1441        help
1442          This driver provides support for the Apple System Management
1443          Controller, which provides an accelerometer (Apple Sudden Motion
1444          Sensor), light sensors, temperature sensors, keyboard backlight
1445          control and fan control.
1446
1447          Only Intel-based Apple's computers are supported (MacBook Pro,
1448          MacBook, MacMini).
1449
1450          Data from the different sensors, keyboard backlight control and fan
1451          control are accessible via sysfs.
1452
1453          This driver also provides an absolute input class device, allowing
1454          the laptop to act as a pinball machine-esque joystick.
1455
1456          Say Y here if you have an applicable laptop and want to experience
1457          the awesome power of applesmc.
1458
1459config SENSORS_MC13783_ADC
1460        tristate "Freescale MC13783/MC13892 ADC"
1461        depends on MFD_MC13XXX
1462        help
1463          Support for the A/D converter on MC13783 and MC13892 PMIC.
1464
1465if ACPI
1466
1467comment "ACPI drivers"
1468
1469config SENSORS_ACPI_POWER
1470        tristate "ACPI 4.0 power meter"
1471        help
1472          This driver exposes ACPI 4.0 power meters as hardware monitoring
1473          devices.  Say Y (or M) if you have a computer with ACPI 4.0 firmware
1474          and a power meter.
1475
1476          To compile this driver as a module, choose M here:
1477          the module will be called acpi_power_meter.
1478
1479config SENSORS_ATK0110
1480        tristate "ASUS ATK0110"
1481        depends on X86
1482        help
1483          If you say yes here you get support for the ACPI hardware
1484          monitoring interface found in many ASUS motherboards. This
1485          driver will provide readings of fans, voltages and temperatures
1486          through the system firmware.
1487
1488          This driver can also be built as a module. If so, the module
1489          will be called asus_atk0110.
1490
1491endif # ACPI
1492
1493endif # HWMON
1494
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.