linux/drivers/uio/Kconfig
<<
>>
Prefs
   1menuconfig UIO
   2        tristate "Userspace I/O drivers"
   3        depends on !S390
   4        help
   5          Enable this to allow the userspace driver core code to be
   6          built.  This code allows userspace programs easy access to
   7          kernel interrupts and memory locations, allowing some drivers
   8          to be written in userspace.  Note that a small kernel driver
   9          is also required for interrupt handling to work properly.
  10
  11          If you don't know what to do here, say N.
  12
  13if UIO
  14
  15config UIO_CIF
  16        tristate "generic Hilscher CIF Card driver"
  17        depends on PCI
  18        help
  19          Driver for Hilscher CIF DeviceNet and Profibus cards.  This
  20          driver requires a userspace component called cif that handles
  21          all of the heavy lifting and can be found at:
  22                <http://www.osadl.org/projects/downloads/UIO/user/>
  23
  24          To compile this driver as a module, choose M here: the module
  25          will be called uio_cif.
  26
  27config UIO_PDRV
  28        tristate "Userspace I/O platform driver"
  29        help
  30          Generic platform driver for Userspace I/O devices.
  31
  32          If you don't know what to do here, say N.
  33
  34config UIO_PDRV_GENIRQ
  35        tristate "Userspace I/O platform driver with generic IRQ handling"
  36        help
  37          Platform driver for Userspace I/O devices, including generic
  38          interrupt handling code. Shared interrupts are not supported.
  39
  40          This kernel driver requires that the matching userspace driver
  41          handles interrupts in a special way. Userspace is responsible
  42          for acknowledging the hardware device if needed, and re-enabling
  43          interrupts in the interrupt controller using the write() syscall.
  44
  45          If you don't know what to do here, say N.
  46
  47config UIO_DMEM_GENIRQ
  48        tristate "Userspace platform driver with generic irq and dynamic memory"
  49        help
  50          Platform driver for Userspace I/O devices, including generic
  51          interrupt handling code. Shared interrupts are not supported.
  52
  53          Memory regions can be specified with the same platform device
  54          resources as the UIO_PDRV drivers, but dynamic regions can also
  55          be specified.
  56          The number and size of these regions is static,
  57          but the memory allocation is not performed until
  58          the associated device file is opened. The
  59          memory is freed once the uio device is closed.
  60
  61          If you don't know what to do here, say N.
  62
  63config UIO_AEC
  64        tristate "AEC video timestamp device"
  65        depends on PCI
  66        help
  67
  68          UIO driver for the Adrienne Electronics Corporation PCI time
  69          code device.
  70
  71          This device differs from other UIO devices since it uses I/O
  72          ports instead of memory mapped I/O. In order to make it
  73          possible for UIO to work with this device a utility, uioport,
  74          can be used to read and write the ports:
  75
  76            git clone git://ifup.org/philips/uioport.git
  77
  78          If you compile this as a module, it will be called uio_aec.
  79
  80config UIO_SERCOS3
  81        tristate "Automata Sercos III PCI card driver"
  82        depends on PCI
  83        help
  84          Userspace I/O interface for the Sercos III PCI card from
  85          Automata GmbH. The userspace part of this driver will be
  86          available for download from the Automata GmbH web site.
  87
  88          Automata GmbH:        http://www.automataweb.com
  89          Sercos III interface: http://www.sercos.com
  90
  91          If you compile this as a module, it will be called uio_sercos3.
  92
  93config UIO_PCI_GENERIC
  94        tristate "Generic driver for PCI 2.3 and PCI Express cards"
  95        depends on PCI
  96        help
  97          Generic driver that you can bind, dynamically, to any
  98          PCI 2.3 compliant and PCI Express card. It is useful,
  99          primarily, for virtualization scenarios.
 100          If you compile this as a module, it will be called uio_pci_generic.
 101
 102config UIO_NETX
 103        tristate "Hilscher NetX Card driver"
 104        depends on PCI
 105        help
 106          Driver for Hilscher NetX based fieldbus cards (cifX, comX).
 107          This driver requires a userspace component that comes with the card
 108          or is available from Hilscher (http://www.hilscher.com).
 109
 110          To compile this driver as a module, choose M here; the module
 111          will be called uio_netx.
 112
 113config UIO_PRUSS
 114        tristate "Texas Instruments PRUSS driver"
 115        depends on ARCH_DAVINCI_DA850
 116        select GENERIC_ALLOCATOR
 117        help
 118          PRUSS driver for OMAPL138/DA850/AM18XX devices
 119          PRUSS driver requires user space components, examples and user space
 120          driver is available from below SVN repo - you may use anonymous login
 121
 122          https://gforge.ti.com/gf/project/pru_sw/
 123
 124          More info on API is available at below wiki
 125
 126          http://processors.wiki.ti.com/index.php/PRU_Linux_Application_Loader
 127
 128          To compile this driver as a module, choose M here: the module
 129          will be called uio_pruss.
 130
 131endif
 132
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.