linux/drivers/ide/sis5513.c
<<
>>
Prefs
   1/*
   2 * Copyright (C) 1999-2000      Andre Hedrick <andre@linux-ide.org>
   3 * Copyright (C) 2002           Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer
   4 * Copyright (C) 2003           Vojtech Pavlik <vojtech@suse.cz>
   5 * Copyright (C) 2007-2009      Bartlomiej Zolnierkiewicz
   6 *
   7 * May be copied or modified under the terms of the GNU General Public License
   8 *
   9 *
  10 * Thanks :
  11 *
  12 * SiS Taiwan           : for direct support and hardware.
  13 * Daniela Engert       : for initial ATA100 advices and numerous others.
  14 * John Fremlin, Manfred Spraul, Dave Morgan, Peter Kjellerstedt        :
  15 *                        for checking code correctness, providing patches.
  16 *
  17 *
  18 * Original tests and design on the SiS620 chipset.
  19 * ATA100 tests and design on the SiS735 chipset.
  20 * ATA16/33 support from specs
  21 * ATA133 support for SiS961/962 by L.C. Chang <lcchang@sis.com.tw>
  22 * ATA133 961/962/963 fixes by Vojtech Pavlik <vojtech@suse.cz>
  23 *
  24 * Documentation:
  25 *      SiS chipset documentation available under NDA to companies only
  26 *      (not to individuals).
  27 */
  28
  29/*
  30 * The original SiS5513 comes from a SiS5511/55112/5513 chipset. The original
  31 * SiS5513 was also used in the SiS5596/5513 chipset. Thus if we see a SiS5511
  32 * or SiS5596, we can assume we see the first MWDMA-16 capable SiS5513 chip.
  33 *
  34 * Later SiS chipsets integrated the 5513 functionality into the NorthBridge,
  35 * starting with SiS5571 and up to SiS745. The PCI ID didn't change, though. We
  36 * can figure out that we have a more modern and more capable 5513 by looking
  37 * for the respective NorthBridge IDs.
  38 *
  39 * Even later (96x family) SiS chipsets use the MuTIOL link and place the 5513
  40 * into the SouthBrige. Here we cannot rely on looking up the NorthBridge PCI
  41 * ID, while the now ATA-133 capable 5513 still has the same PCI ID.
  42 * Fortunately the 5513 can be 'unmasked' by fiddling with some config space
  43 * bits, changing its device id to the true one - 5517 for 961 and 5518 for
  44 * 962/963.
  45 */
  46
  47#include <linux/types.h>
  48#include <linux/module.h>
  49#include <linux/kernel.h>
  50#include <linux/pci.h>
  51#include <linux/init.h>
  52#include <linux/ide.h>
  53
  54#define DRV_NAME "sis5513"
  55
  56/* registers layout and init values are chipset family dependent */
  57
  58#define ATA_16          0x01
  59#define ATA_33          0x02
  60#define ATA_66          0x03
  61#define ATA_100a        0x04 /* SiS730/SiS550 is ATA100 with ATA66 layout */
  62#define ATA_100         0x05
  63#define ATA_133a        0x06 /* SiS961b with 133 support */
  64#define ATA_133         0x07 /* SiS962/963 */
  65
  66static u8 chipset_family;
  67
  68/*
  69 * Devices supported
  70 */
  71static const struct {
  72        const char *name;
  73        u16 host_id;
  74        u8 chipset_family;
  75        u8 flags;
  76} SiSHostChipInfo[] = {
  77        { "SiS968",     PCI_DEVICE_ID_SI_968,   ATA_133  },
  78        { "SiS966",     PCI_DEVICE_ID_SI_966,   ATA_133  },
  79        { "SiS965",     PCI_DEVICE_ID_SI_965,   ATA_133  },
  80        { "SiS745",     PCI_DEVICE_ID_SI_745,   ATA_100  },
  81        { "SiS735",     PCI_DEVICE_ID_SI_735,   ATA_100  },
  82        { "SiS733",     PCI_DEVICE_ID_SI_733,   ATA_100  },
  83        { "SiS635",     PCI_DEVICE_ID_SI_635,   ATA_100  },
  84        { "SiS633",     PCI_DEVICE_ID_SI_633,   ATA_100  },
  85
  86        { "SiS730",     PCI_DEVICE_ID_SI_730,   ATA_100a },
  87        { "SiS550",     PCI_DEVICE_ID_SI_550,   ATA_100a },
  88
  89        { "SiS640",     PCI_DEVICE_ID_SI_640,   ATA_66   },
  90        { "SiS630",     PCI_DEVICE_ID_SI_630,   ATA_66   },
  91        { "SiS620",     PCI_DEVICE_ID_SI_620,   ATA_66   },
  92        { "SiS540",     PCI_DEVICE_ID_SI_540,   ATA_66   },
  93        { "SiS530",     PCI_DEVICE_ID_SI_530,   ATA_66   },
  94
  95        { "SiS5600",    PCI_DEVICE_ID_SI_5600,  ATA_33   },
  96        { "SiS5598",    PCI_DEVICE_ID_SI_5598,  ATA_33   },
  97        { "SiS5597",    PCI_DEVICE_ID_SI_5597,  ATA_33   },
  98        { "SiS5591/2",  PCI_DEVICE_ID_SI_5591,  ATA_33   },
  99        { "SiS5582",    PCI_DEVICE_ID_SI_5582,  ATA_33   },
 100        { "SiS5581",    PCI_DEVICE_ID_SI_5581,  ATA_33   },
 101
 102        { "SiS5596",    PCI_DEVICE_ID_SI_5596,  ATA_16   },
 103        { "SiS5571",    PCI_DEVICE_ID_SI_5571,  ATA_16   },
 104        { "SiS5517",    PCI_DEVICE_ID_SI_5517,  ATA_16   },
 105        { "SiS551x",    PCI_DEVICE_ID_SI_5511,  ATA_16   },
 106};
 107
 108/* Cycle time bits and values vary across chip dma capabilities
 109   These three arrays hold the register layout and the values to set.
 110   Indexed by chipset_family and (dma_mode - XFER_UDMA_0) */
 111
 112/* {0, ATA_16, ATA_33, ATA_66, ATA_100a, ATA_100, ATA_133} */
 113static u8 cycle_time_offset[] = { 0, 0, 5, 4, 4, 0, 0 };
 114static u8 cycle_time_range[]  = { 0, 0, 2, 3, 3, 4, 4 };
 115static u8 cycle_time_value[][XFER_UDMA_6 - XFER_UDMA_0 + 1] = {
 116        {  0,  0, 0, 0, 0, 0, 0 }, /* no UDMA */
 117        {  0,  0, 0, 0, 0, 0, 0 }, /* no UDMA */
 118        {  3,  2, 1, 0, 0, 0, 0 }, /* ATA_33 */
 119        {  7,  5, 3, 2, 1, 0, 0 }, /* ATA_66 */
 120        {  7,  5, 3, 2, 1, 0, 0 }, /* ATA_100a (730 specific),
 121                                      different cycle_time range and offset */
 122        { 11,  7, 5, 4, 2, 1, 0 }, /* ATA_100 */
 123        { 15, 10, 7, 5, 3, 2, 1 }, /* ATA_133a (earliest 691 southbridges) */
 124        { 15, 10, 7, 5, 3, 2, 1 }, /* ATA_133 */
 125};
 126/* CRC Valid Setup Time vary across IDE clock setting 33/66/100/133
 127   See SiS962 data sheet for more detail */
 128static u8 cvs_time_value[][XFER_UDMA_6 - XFER_UDMA_0 + 1] = {
 129        { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */
 130        { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */
 131        { 2, 1, 1, 0, 0, 0, 0 },
 132        { 4, 3, 2, 1, 0, 0, 0 },
 133        { 4, 3, 2, 1, 0, 0, 0 },
 134        { 6, 4, 3, 1, 1, 1, 0 },
 135        { 9, 6, 4, 2, 2, 2, 2 },
 136        { 9, 6, 4, 2, 2, 2, 2 },
 137};
 138/* Initialize time, Active time, Recovery time vary across
 139   IDE clock settings. These 3 arrays hold the register value
 140   for PIO0/1/2/3/4 and DMA0/1/2 mode in order */
 141static u8 ini_time_value[][8] = {
 142        { 0, 0, 0, 0, 0, 0, 0, 0 },
 143        { 0, 0, 0, 0, 0, 0, 0, 0 },
 144        { 2, 1, 0, 0, 0, 1, 0, 0 },
 145        { 4, 3, 1, 1, 1, 3, 1, 1 },
 146        { 4, 3, 1, 1, 1, 3, 1, 1 },
 147        { 6, 4, 2, 2, 2, 4, 2, 2 },
 148        { 9, 6, 3, 3, 3, 6, 3, 3 },
 149        { 9, 6, 3, 3, 3, 6, 3, 3 },
 150};
 151static u8 act_time_value[][8] = {
 152        {  0,  0,  0,  0, 0,  0,  0, 0 },
 153        {  0,  0,  0,  0, 0,  0,  0, 0 },
 154        {  9,  9,  9,  2, 2,  7,  2, 2 },
 155        { 19, 19, 19,  5, 4, 14,  5, 4 },
 156        { 19, 19, 19,  5, 4, 14,  5, 4 },
 157        { 28, 28, 28,  7, 6, 21,  7, 6 },
 158        { 38, 38, 38, 10, 9, 28, 10, 9 },
 159        { 38, 38, 38, 10, 9, 28, 10, 9 },
 160};
 161static u8 rco_time_value[][8] = {
 162        {  0,  0, 0,  0, 0,  0,  0, 0 },
 163        {  0,  0, 0,  0, 0,  0,  0, 0 },
 164        {  9,  2, 0,  2, 0,  7,  1, 1 },
 165        { 19,  5, 1,  5, 2, 16,  3, 2 },
 166        { 19,  5, 1,  5, 2, 16,  3, 2 },
 167        { 30,  9, 3,  9, 4, 25,  6, 4 },
 168        { 40, 12, 4, 12, 5, 34, 12, 5 },
 169        { 40, 12, 4, 12, 5, 34, 12, 5 },
 170};
 171
 172/*
 173 * Printing configuration
 174 */
 175/* Used for chipset type printing at boot time */
 176static char *chipset_capability[] = {
 177        "ATA", "ATA 16",
 178        "ATA 33", "ATA 66",
 179        "ATA 100 (1st gen)", "ATA 100 (2nd gen)",
 180        "ATA 133 (1st gen)", "ATA 133 (2nd gen)"
 181};
 182
 183/*
 184 * Configuration functions
 185 */
 186
 187static u8 sis_ata133_get_base(ide_drive_t *drive)
 188{
 189        struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
 190        u32 reg54 = 0;
 191
 192        pci_read_config_dword(dev, 0x54, &reg54);
 193
 194        return ((reg54 & 0x40000000) ? 0x70 : 0x40) + drive->dn * 4;
 195}
 196
 197static void sis_ata16_program_timings(ide_drive_t *drive, const u8 mode)
 198{
 199        struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
 200        u16 t1 = 0;
 201        u8 drive_pci = 0x40 + drive->dn * 2;
 202
 203        const u16 pio_timings[]   = { 0x000, 0x607, 0x404, 0x303, 0x301 };
 204        const u16 mwdma_timings[] = { 0x008, 0x302, 0x301 };
 205
 206        pci_read_config_word(dev, drive_pci, &t1);
 207
 208        /* clear active/recovery timings */
 209        t1 &= ~0x070f;
 210        if (mode >= XFER_MW_DMA_0) {
 211                if (chipset_family > ATA_16)
 212                        t1 &= ~0x8000;  /* disable UDMA */
 213                t1 |= mwdma_timings[mode - XFER_MW_DMA_0];
 214        } else
 215                t1 |= pio_timings[mode - XFER_PIO_0];
 216
 217        pci_write_config_word(dev, drive_pci, t1);
 218}
 219
 220static void sis_ata100_program_timings(ide_drive_t *drive, const u8 mode)
 221{
 222        struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
 223        u8 t1, drive_pci = 0x40 + drive->dn * 2;
 224
 225        /* timing bits: 7:4 active 3:0 recovery */
 226        const u8 pio_timings[]   = { 0x00, 0x67, 0x44, 0x33, 0x31 };
 227        const u8 mwdma_timings[] = { 0x08, 0x32, 0x31 };
 228
 229        if (mode >= XFER_MW_DMA_0) {
 230                u8 t2 = 0;
 231
 232                pci_read_config_byte(dev, drive_pci, &t2);
 233                t2 &= ~0x80;    /* disable UDMA */
 234                pci_write_config_byte(dev, drive_pci, t2);
 235
 236                t1 = mwdma_timings[mode - XFER_MW_DMA_0];
 237        } else
 238                t1 = pio_timings[mode - XFER_PIO_0];
 239
 240        pci_write_config_byte(dev, drive_pci + 1, t1);
 241}
 242
 243static void sis_ata133_program_timings(ide_drive_t *drive, const u8 mode)
 244{
 245        struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
 246        u32 t1 = 0;
 247        u8 drive_pci = sis_ata133_get_base(drive), clk, idx;
 248
 249        pci_read_config_dword(dev, drive_pci, &t1);
 250
 251        t1 &= 0xc0c00fff;
 252        clk = (t1 & 0x08) ? ATA_133 : ATA_100;
 253        if (mode >= XFER_MW_DMA_0) {
 254                t1 &= ~0x04;    /* disable UDMA */
 255                idx = mode - XFER_MW_DMA_0 + 5;
 256        } else
 257                idx = mode - XFER_PIO_0;
 258        t1 |= ini_time_value[clk][idx] << 12;
 259        t1 |= act_time_value[clk][idx] << 16;
 260        t1 |= rco_time_value[clk][idx] << 24;
 261
 262        pci_write_config_dword(dev, drive_pci, t1);
 263}
 264
 265static void sis_program_timings(ide_drive_t *drive, const u8 mode)
 266{
 267        if (chipset_family < ATA_100)           /* ATA_16/33/66/100a */
 268                sis_ata16_program_timings(drive, mode);
 269        else if (chipset_family < ATA_133)      /* ATA_100/133a */
 270                sis_ata100_program_timings(drive, mode);
 271        else                                    /* ATA_133 */
 272                sis_ata133_program_timings(drive, mode);
 273}
 274
 275static void config_drive_art_rwp(ide_drive_t *drive)
 276{
 277        ide_hwif_t *hwif        = drive->hwif;
 278        struct pci_dev *dev     = to_pci_dev(hwif->dev);
 279        u8 reg4bh               = 0;
 280        u8 rw_prefetch          = 0;
 281
 282        pci_read_config_byte(dev, 0x4b, &reg4bh);
 283
 284        rw_prefetch = reg4bh & ~(0x11 << drive->dn);
 285
 286        if (drive->media == ide_disk)
 287                rw_prefetch |= 0x11 << drive->dn;
 288
 289        if (reg4bh != rw_prefetch)
 290                pci_write_config_byte(dev, 0x4b, rw_prefetch);
 291}
 292
 293static void sis_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 294{
 295        config_drive_art_rwp(drive);
 296        sis_program_timings(drive, drive->pio_mode);
 297}
 298
 299static void sis_ata133_program_udma_timings(ide_drive_t *drive, const u8 mode)
 300{
 301        struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
 302        u32 regdw = 0;
 303        u8 drive_pci = sis_ata133_get_base(drive), clk, idx;
 304
 305        pci_read_config_dword(dev, drive_pci, &regdw);
 306
 307        regdw |= 0x04;
 308        regdw &= 0xfffff00f;
 309        /* check if ATA133 enable */
 310        clk = (regdw & 0x08) ? ATA_133 : ATA_100;
 311        idx = mode - XFER_UDMA_0;
 312        regdw |= cycle_time_value[clk][idx] << 4;
 313        regdw |= cvs_time_value[clk][idx] << 8;
 314
 315        pci_write_config_dword(dev, drive_pci, regdw);
 316}
 317
 318static void sis_ata33_program_udma_timings(ide_drive_t *drive, const u8 mode)
 319{
 320        struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
 321        u8 drive_pci = 0x40 + drive->dn * 2, reg = 0, i = chipset_family;
 322
 323        pci_read_config_byte(dev, drive_pci + 1, &reg);
 324
 325        /* force the UDMA bit on if we want to use UDMA */
 326        reg |= 0x80;
 327        /* clean reg cycle time bits */
 328        reg &= ~((0xff >> (8 - cycle_time_range[i])) << cycle_time_offset[i]);
 329        /* set reg cycle time bits */
 330        reg |= cycle_time_value[i][mode - XFER_UDMA_0] << cycle_time_offset[i];
 331
 332        pci_write_config_byte(dev, drive_pci + 1, reg);
 333}
 334
 335static void sis_program_udma_timings(ide_drive_t *drive, const u8 mode)
 336{
 337        if (chipset_family >= ATA_133)  /* ATA_133 */
 338                sis_ata133_program_udma_timings(drive, mode);
 339        else                            /* ATA_33/66/100a/100/133a */
 340                sis_ata33_program_udma_timings(drive, mode);
 341}
 342
 343static void sis_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 344{
 345        const u8 speed = drive->dma_mode;
 346
 347        if (speed >= XFER_UDMA_0)
 348                sis_program_udma_timings(drive, speed);
 349        else
 350                sis_program_timings(drive, speed);
 351}
 352
 353static u8 sis_ata133_udma_filter(ide_drive_t *drive)
 354{
 355        struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
 356        u32 regdw = 0;
 357        u8 drive_pci = sis_ata133_get_base(drive);
 358
 359        pci_read_config_dword(dev, drive_pci, &regdw);
 360
 361        /* if ATA133 disable, we should not set speed above UDMA5 */
 362        return (regdw & 0x08) ? ATA_UDMA6 : ATA_UDMA5;
 363}
 364
 365static int __devinit sis_find_family(struct pci_dev *dev)
 366{
 367        struct pci_dev *host;
 368        int i = 0;
 369
 370        chipset_family = 0;
 371
 372        for (i = 0; i < ARRAY_SIZE(SiSHostChipInfo) && !chipset_family; i++) {
 373
 374                host = pci_get_device(PCI_VENDOR_ID_SI, SiSHostChipInfo[i].host_id, NULL);
 375
 376                if (!host)
 377                        continue;
 378
 379                chipset_family = SiSHostChipInfo[i].chipset_family;
 380
 381                /* Special case for SiS630 : 630S/ET is ATA_100a */
 382                if (SiSHostChipInfo[i].host_id == PCI_DEVICE_ID_SI_630) {
 383                        if (host->revision >= 0x30)
 384                                chipset_family = ATA_100a;
 385                }
 386                pci_dev_put(host);
 387
 388                printk(KERN_INFO DRV_NAME " %s: %s %s controller\n",
 389                        pci_name(dev), SiSHostChipInfo[i].name,
 390                        chipset_capability[chipset_family]);
 391        }
 392
 393        if (!chipset_family) { /* Belongs to pci-quirks */
 394
 395                        u32 idemisc;
 396                        u16 trueid;
 397
 398                        /* Disable ID masking and register remapping */
 399                        pci_read_config_dword(dev, 0x54, &idemisc);
 400                        pci_write_config_dword(dev, 0x54, (idemisc & 0x7fffffff));
 401                        pci_read_config_word(dev, PCI_DEVICE_ID, &trueid);
 402                        pci_write_config_dword(dev, 0x54, idemisc);
 403
 404                        if (trueid == 0x5518) {
 405                                printk(KERN_INFO DRV_NAME " %s: SiS 962/963 MuTIOL IDE UDMA133 controller\n",
 406                                        pci_name(dev));
 407                                chipset_family = ATA_133;
 408
 409                                /* Check for 5513 compatibility mapping
 410                                 * We must use this, else the port enabled code will fail,
 411                                 * as it expects the enablebits at 0x4a.
 412                                 */
 413                                if ((idemisc & 0x40000000) == 0) {
 414                                        pci_write_config_dword(dev, 0x54, idemisc | 0x40000000);
 415                                        printk(KERN_INFO DRV_NAME " %s: Switching to 5513 register mapping\n",
 416                                                pci_name(dev));
 417                                }
 418                        }
 419        }
 420
 421        if (!chipset_family) { /* Belongs to pci-quirks */
 422
 423                        struct pci_dev *lpc_bridge;
 424                        u16 trueid;
 425                        u8 prefctl;
 426                        u8 idecfg;
 427
 428                        pci_read_config_byte(dev, 0x4a, &idecfg);
 429                        pci_write_config_byte(dev, 0x4a, idecfg | 0x10);
 430                        pci_read_config_word(dev, PCI_DEVICE_ID, &trueid);
 431                        pci_write_config_byte(dev, 0x4a, idecfg);
 432
 433                        if (trueid == 0x5517) { /* SiS 961/961B */
 434
 435                                lpc_bridge = pci_get_slot(dev->bus, 0x10); /* Bus 0, Dev 2, Fn 0 */
 436                                pci_read_config_byte(dev, 0x49, &prefctl);
 437                                pci_dev_put(lpc_bridge);
 438
 439                                if (lpc_bridge->revision == 0x10 && (prefctl & 0x80)) {
 440                                        printk(KERN_INFO DRV_NAME " %s: SiS 961B MuTIOL IDE UDMA133 controller\n",
 441                                                pci_name(dev));
 442                                        chipset_family = ATA_133a;
 443                                } else {
 444                                        printk(KERN_INFO DRV_NAME " %s: SiS 961 MuTIOL IDE UDMA100 controller\n",
 445                                                pci_name(dev));
 446                                        chipset_family = ATA_100;
 447                                }
 448                        }
 449        }
 450
 451        return chipset_family;
 452}
 453
 454static int init_chipset_sis5513(struct pci_dev *dev)
 455{
 456        /* Make general config ops here
 457           1/ tell IDE channels to operate in Compatibility mode only
 458           2/ tell old chips to allow per drive IDE timings */
 459
 460        u8 reg;
 461        u16 regw;
 462
 463        switch (chipset_family) {
 464        case ATA_133:
 465                /* SiS962 operation mode */
 466                pci_read_config_word(dev, 0x50, &regw);
 467                if (regw & 0x08)
 468                        pci_write_config_word(dev, 0x50, regw&0xfff7);
 469                pci_read_config_word(dev, 0x52, &regw);
 470                if (regw & 0x08)
 471                        pci_write_config_word(dev, 0x52, regw&0xfff7);
 472                break;
 473        case ATA_133a:
 474        case ATA_100:
 475                /* Fixup latency */
 476                pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x80);
 477                /* Set compatibility bit */
 478                pci_read_config_byte(dev, 0x49, &reg);
 479                if (!(reg & 0x01))
 480                        pci_write_config_byte(dev, 0x49, reg|0x01);
 481                break;
 482        case ATA_100a:
 483        case ATA_66:
 484                /* Fixup latency */
 485                pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x10);
 486
 487                /* On ATA_66 chips the bit was elsewhere */
 488                pci_read_config_byte(dev, 0x52, &reg);
 489                if (!(reg & 0x04))
 490                        pci_write_config_byte(dev, 0x52, reg|0x04);
 491                break;
 492        case ATA_33:
 493                /* On ATA_33 we didn't have a single bit to set */
 494                pci_read_config_byte(dev, 0x09, &reg);
 495                if ((reg & 0x0f) != 0x00)
 496                        pci_write_config_byte(dev, 0x09, reg&0xf0);
 497        case ATA_16:
 498                /* force per drive recovery and active timings
 499                   needed on ATA_33 and below chips */
 500                pci_read_config_byte(dev, 0x52, &reg);
 501                if (!(reg & 0x08))
 502                        pci_write_config_byte(dev, 0x52, reg|0x08);
 503                break;
 504        }
 505
 506        return 0;
 507}
 508
 509struct sis_laptop {
 510        u16 device;
 511        u16 subvendor;
 512        u16 subdevice;
 513};
 514
 515static const struct sis_laptop sis_laptop[] = {
 516        /* devid, subvendor, subdev */
 517        { 0x5513, 0x1043, 0x1107 },     /* ASUS A6K */
 518        { 0x5513, 0x1734, 0x105f },     /* FSC Amilo A1630 */
 519        { 0x5513, 0x1071, 0x8640 },     /* EasyNote K5305 */
 520        /* end marker */
 521        { 0, }
 522};
 523
 524static u8 sis_cable_detect(ide_hwif_t *hwif)
 525{
 526        struct pci_dev *pdev = to_pci_dev(hwif->dev);
 527        const struct sis_laptop *lap = &sis_laptop[0];
 528        u8 ata66 = 0;
 529
 530        while (lap->device) {
 531                if (lap->device == pdev->device &&
 532                    lap->subvendor == pdev->subsystem_vendor &&
 533                    lap->subdevice == pdev->subsystem_device)
 534                        return ATA_CBL_PATA40_SHORT;
 535                lap++;
 536        }
 537
 538        if (chipset_family >= ATA_133) {
 539                u16 regw = 0;
 540                u16 reg_addr = hwif->channel ? 0x52: 0x50;
 541                pci_read_config_word(pdev, reg_addr, &regw);
 542                ata66 = (regw & 0x8000) ? 0 : 1;
 543        } else if (chipset_family >= ATA_66) {
 544                u8 reg48h = 0;
 545                u8 mask = hwif->channel ? 0x20 : 0x10;
 546                pci_read_config_byte(pdev, 0x48, &reg48h);
 547                ata66 = (reg48h & mask) ? 0 : 1;
 548        }
 549
 550        return ata66 ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
 551}
 552
 553static const struct ide_port_ops sis_port_ops = {
 554        .set_pio_mode           = sis_set_pio_mode,
 555        .set_dma_mode           = sis_set_dma_mode,
 556        .cable_detect           = sis_cable_detect,
 557};
 558
 559static const struct ide_port_ops sis_ata133_port_ops = {
 560        .set_pio_mode           = sis_set_pio_mode,
 561        .set_dma_mode           = sis_set_dma_mode,
 562        .udma_filter            = sis_ata133_udma_filter,
 563        .cable_detect           = sis_cable_detect,
 564};
 565
 566static const struct ide_port_info sis5513_chipset __devinitconst = {
 567        .name           = DRV_NAME,
 568        .init_chipset   = init_chipset_sis5513,
 569        .enablebits     = { {0x4a, 0x02, 0x02}, {0x4a, 0x04, 0x04} },
 570        .host_flags     = IDE_HFLAG_NO_AUTODMA,
 571        .pio_mask       = ATA_PIO4,
 572        .mwdma_mask     = ATA_MWDMA2,
 573};
 574
 575static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 576{
 577        struct ide_port_info d = sis5513_chipset;
 578        u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f };
 579        int rc;
 580
 581        rc = pci_enable_device(dev);
 582        if (rc)
 583                return rc;
 584
 585        if (sis_find_family(dev) == 0)
 586                return -ENOTSUPP;
 587
 588        if (chipset_family >= ATA_133)
 589                d.port_ops = &sis_ata133_port_ops;
 590        else
 591                d.port_ops = &sis_port_ops;
 592
 593        d.udma_mask = udma_rates[chipset_family];
 594
 595        return ide_pci_init_one(dev, &d, NULL);
 596}
 597
 598static void __devexit sis5513_remove(struct pci_dev *dev)
 599{
 600        ide_pci_remove(dev);
 601        pci_disable_device(dev);
 602}
 603
 604static const struct pci_device_id sis5513_pci_tbl[] = {
 605        { PCI_VDEVICE(SI, PCI_DEVICE_ID_SI_5513), 0 },
 606        { PCI_VDEVICE(SI, PCI_DEVICE_ID_SI_5518), 0 },
 607        { PCI_VDEVICE(SI, PCI_DEVICE_ID_SI_1180), 0 },
 608        { 0, },
 609};
 610MODULE_DEVICE_TABLE(pci, sis5513_pci_tbl);
 611
 612static struct pci_driver sis5513_pci_driver = {
 613        .name           = "SIS_IDE",
 614        .id_table       = sis5513_pci_tbl,
 615        .probe          = sis5513_init_one,
 616        .remove         = __devexit_p(sis5513_remove),
 617        .suspend        = ide_pci_suspend,
 618        .resume         = ide_pci_resume,
 619};
 620
 621static int __init sis5513_ide_init(void)
 622{
 623        return ide_pci_register_driver(&sis5513_pci_driver);
 624}
 625
 626static void __exit sis5513_ide_exit(void)
 627{
 628        pci_unregister_driver(&sis5513_pci_driver);
 629}
 630
 631module_init(sis5513_ide_init);
 632module_exit(sis5513_ide_exit);
 633
 634MODULE_AUTHOR("Lionel Bouton, L C Chang, Andre Hedrick, Vojtech Pavlik");
 635MODULE_DESCRIPTION("PCI driver module for SIS IDE");
 636MODULE_LICENSE("GPL");
 637
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.