linux/drivers/cpufreq/s5pv210-cpufreq.c
<<
>>
Prefs
   1/*
   2 * Copyright (c) 2010 Samsung Electronics Co., Ltd.
   3 *              http://www.samsung.com
   4 *
   5 * CPU frequency scaling for S5PC110/S5PV210
   6 *
   7 * This program is free software; you can redistribute it and/or modify
   8 * it under the terms of the GNU General Public License version 2 as
   9 * published by the Free Software Foundation.
  10*/
  11
  12#include <linux/types.h>
  13#include <linux/kernel.h>
  14#include <linux/init.h>
  15#include <linux/err.h>
  16#include <linux/clk.h>
  17#include <linux/io.h>
  18#include <linux/cpufreq.h>
  19#include <linux/reboot.h>
  20#include <linux/regulator/consumer.h>
  21#include <linux/suspend.h>
  22
  23#include <mach/map.h>
  24#include <mach/regs-clock.h>
  25
  26static struct clk *cpu_clk;
  27static struct clk *dmc0_clk;
  28static struct clk *dmc1_clk;
  29static struct cpufreq_freqs freqs;
  30static DEFINE_MUTEX(set_freq_lock);
  31
  32/* APLL M,P,S values for 1G/800Mhz */
  33#define APLL_VAL_1000   ((1 << 31) | (125 << 16) | (3 << 8) | 1)
  34#define APLL_VAL_800    ((1 << 31) | (100 << 16) | (3 << 8) | 1)
  35
  36/* Use 800MHz when entering sleep mode */
  37#define SLEEP_FREQ      (800 * 1000)
  38
  39/*
  40 * relation has an additional symantics other than the standard of cpufreq
  41 * DISALBE_FURTHER_CPUFREQ: disable further access to target
  42 * ENABLE_FURTUER_CPUFREQ: enable access to target
  43 */
  44enum cpufreq_access {
  45        DISABLE_FURTHER_CPUFREQ = 0x10,
  46        ENABLE_FURTHER_CPUFREQ = 0x20,
  47};
  48
  49static bool no_cpufreq_access;
  50
  51/*
  52 * DRAM configurations to calculate refresh counter for changing
  53 * frequency of memory.
  54 */
  55struct dram_conf {
  56        unsigned long freq;     /* HZ */
  57        unsigned long refresh;  /* DRAM refresh counter * 1000 */
  58};
  59
  60/* DRAM configuration (DMC0 and DMC1) */
  61static struct dram_conf s5pv210_dram_conf[2];
  62
  63enum perf_level {
  64        L0, L1, L2, L3, L4,
  65};
  66
  67enum s5pv210_mem_type {
  68        LPDDR   = 0x1,
  69        LPDDR2  = 0x2,
  70        DDR2    = 0x4,
  71};
  72
  73enum s5pv210_dmc_port {
  74        DMC0 = 0,
  75        DMC1,
  76};
  77
  78static struct cpufreq_frequency_table s5pv210_freq_table[] = {
  79        {L0, 1000*1000},
  80        {L1, 800*1000},
  81        {L2, 400*1000},
  82        {L3, 200*1000},
  83        {L4, 100*1000},
  84        {0, CPUFREQ_TABLE_END},
  85};
  86
  87static struct regulator *arm_regulator;
  88static struct regulator *int_regulator;
  89
  90struct s5pv210_dvs_conf {
  91        int arm_volt;   /* uV */
  92        int int_volt;   /* uV */
  93};
  94
  95static const int arm_volt_max = 1350000;
  96static const int int_volt_max = 1250000;
  97
  98static struct s5pv210_dvs_conf dvs_conf[] = {
  99        [L0] = {
 100                .arm_volt       = 1250000,
 101                .int_volt       = 1100000,
 102        },
 103        [L1] = {
 104                .arm_volt       = 1200000,
 105                .int_volt       = 1100000,
 106        },
 107        [L2] = {
 108                .arm_volt       = 1050000,
 109                .int_volt       = 1100000,
 110        },
 111        [L3] = {
 112                .arm_volt       = 950000,
 113                .int_volt       = 1100000,
 114        },
 115        [L4] = {
 116                .arm_volt       = 950000,
 117                .int_volt       = 1000000,
 118        },
 119};
 120
 121static u32 clkdiv_val[5][11] = {
 122        /*
 123         * Clock divider value for following
 124         * { APLL, A2M, HCLK_MSYS, PCLK_MSYS,
 125         *   HCLK_DSYS, PCLK_DSYS, HCLK_PSYS, PCLK_PSYS,
 126         *   ONEDRAM, MFC, G3D }
 127         */
 128
 129        /* L0 : [1000/200/100][166/83][133/66][200/200] */
 130        {0, 4, 4, 1, 3, 1, 4, 1, 3, 0, 0},
 131
 132        /* L1 : [800/200/100][166/83][133/66][200/200] */
 133        {0, 3, 3, 1, 3, 1, 4, 1, 3, 0, 0},
 134
 135        /* L2 : [400/200/100][166/83][133/66][200/200] */
 136        {1, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0},
 137
 138        /* L3 : [200/200/100][166/83][133/66][200/200] */
 139        {3, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0},
 140
 141        /* L4 : [100/100/100][83/83][66/66][100/100] */
 142        {7, 7, 0, 0, 7, 0, 9, 0, 7, 0, 0},
 143};
 144
 145/*
 146 * This function set DRAM refresh counter
 147 * accoriding to operating frequency of DRAM
 148 * ch: DMC port number 0 or 1
 149 * freq: Operating frequency of DRAM(KHz)
 150 */
 151static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq)
 152{
 153        unsigned long tmp, tmp1;
 154        void __iomem *reg = NULL;
 155
 156        if (ch == DMC0) {
 157                reg = (S5P_VA_DMC0 + 0x30);
 158        } else if (ch == DMC1) {
 159                reg = (S5P_VA_DMC1 + 0x30);
 160        } else {
 161                printk(KERN_ERR "Cannot find DMC port\n");
 162                return;
 163        }
 164
 165        /* Find current DRAM frequency */
 166        tmp = s5pv210_dram_conf[ch].freq;
 167
 168        do_div(tmp, freq);
 169
 170        tmp1 = s5pv210_dram_conf[ch].refresh;
 171
 172        do_div(tmp1, tmp);
 173
 174        __raw_writel(tmp1, reg);
 175}
 176
 177static int s5pv210_verify_speed(struct cpufreq_policy *policy)
 178{
 179        if (policy->cpu)
 180                return -EINVAL;
 181
 182        return cpufreq_frequency_table_verify(policy, s5pv210_freq_table);
 183}
 184
 185static unsigned int s5pv210_getspeed(unsigned int cpu)
 186{
 187        if (cpu)
 188                return 0;
 189
 190        return clk_get_rate(cpu_clk) / 1000;
 191}
 192
 193static int s5pv210_target(struct cpufreq_policy *policy,
 194                          unsigned int target_freq,
 195                          unsigned int relation)
 196{
 197        unsigned long reg;
 198        unsigned int index, priv_index;
 199        unsigned int pll_changing = 0;
 200        unsigned int bus_speed_changing = 0;
 201        int arm_volt, int_volt;
 202        int ret = 0;
 203
 204        mutex_lock(&set_freq_lock);
 205
 206        if (relation & ENABLE_FURTHER_CPUFREQ)
 207                no_cpufreq_access = false;
 208
 209        if (no_cpufreq_access) {
 210#ifdef CONFIG_PM_VERBOSE
 211                pr_err("%s:%d denied access to %s as it is disabled"
 212                                "temporarily\n", __FILE__, __LINE__, __func__);
 213#endif
 214                ret = -EINVAL;
 215                goto exit;
 216        }
 217
 218        if (relation & DISABLE_FURTHER_CPUFREQ)
 219                no_cpufreq_access = true;
 220
 221        relation &= ~(ENABLE_FURTHER_CPUFREQ | DISABLE_FURTHER_CPUFREQ);
 222
 223        freqs.old = s5pv210_getspeed(0);
 224
 225        if (cpufreq_frequency_table_target(policy, s5pv210_freq_table,
 226                                           target_freq, relation, &index)) {
 227                ret = -EINVAL;
 228                goto exit;
 229        }
 230
 231        freqs.new = s5pv210_freq_table[index].frequency;
 232        freqs.cpu = 0;
 233
 234        if (freqs.new == freqs.old)
 235                goto exit;
 236
 237        /* Finding current running level index */
 238        if (cpufreq_frequency_table_target(policy, s5pv210_freq_table,
 239                                           freqs.old, relation, &priv_index)) {
 240                ret = -EINVAL;
 241                goto exit;
 242        }
 243
 244        arm_volt = dvs_conf[index].arm_volt;
 245        int_volt = dvs_conf[index].int_volt;
 246
 247        if (freqs.new > freqs.old) {
 248                ret = regulator_set_voltage(arm_regulator,
 249                                arm_volt, arm_volt_max);
 250                if (ret)
 251                        goto exit;
 252
 253                ret = regulator_set_voltage(int_regulator,
 254                                int_volt, int_volt_max);
 255                if (ret)
 256                        goto exit;
 257        }
 258
 259        cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 260
 261        /* Check if there need to change PLL */
 262        if ((index == L0) || (priv_index == L0))
 263                pll_changing = 1;
 264
 265        /* Check if there need to change System bus clock */
 266        if ((index == L4) || (priv_index == L4))
 267                bus_speed_changing = 1;
 268
 269        if (bus_speed_changing) {
 270                /*
 271                 * Reconfigure DRAM refresh counter value for minimum
 272                 * temporary clock while changing divider.
 273                 * expected clock is 83Mhz : 7.8usec/(1/83Mhz) = 0x287
 274                 */
 275                if (pll_changing)
 276                        s5pv210_set_refresh(DMC1, 83000);
 277                else
 278                        s5pv210_set_refresh(DMC1, 100000);
 279
 280                s5pv210_set_refresh(DMC0, 83000);
 281        }
 282
 283        /*
 284         * APLL should be changed in this level
 285         * APLL -> MPLL(for stable transition) -> APLL
 286         * Some clock source's clock API are not prepared.
 287         * Do not use clock API in below code.
 288         */
 289        if (pll_changing) {
 290                /*
 291                 * 1. Temporary Change divider for MFC and G3D
 292                 * SCLKA2M(200/1=200)->(200/4=50)Mhz
 293                 */
 294                reg = __raw_readl(S5P_CLK_DIV2);
 295                reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK);
 296                reg |= (3 << S5P_CLKDIV2_G3D_SHIFT) |
 297                        (3 << S5P_CLKDIV2_MFC_SHIFT);
 298                __raw_writel(reg, S5P_CLK_DIV2);
 299
 300                /* For MFC, G3D dividing */
 301                do {
 302                        reg = __raw_readl(S5P_CLKDIV_STAT0);
 303                } while (reg & ((1 << 16) | (1 << 17)));
 304
 305                /*
 306                 * 2. Change SCLKA2M(200Mhz)to SCLKMPLL in MFC_MUX, G3D MUX
 307                 * (200/4=50)->(667/4=166)Mhz
 308                 */
 309                reg = __raw_readl(S5P_CLK_SRC2);
 310                reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK);
 311                reg |= (1 << S5P_CLKSRC2_G3D_SHIFT) |
 312                        (1 << S5P_CLKSRC2_MFC_SHIFT);
 313                __raw_writel(reg, S5P_CLK_SRC2);
 314
 315                do {
 316                        reg = __raw_readl(S5P_CLKMUX_STAT1);
 317                } while (reg & ((1 << 7) | (1 << 3)));
 318
 319                /*
 320                 * 3. DMC1 refresh count for 133Mhz if (index == L4) is
 321                 * true refresh counter is already programed in upper
 322                 * code. 0x287@83Mhz
 323                 */
 324                if (!bus_speed_changing)
 325                        s5pv210_set_refresh(DMC1, 133000);
 326
 327                /* 4. SCLKAPLL -> SCLKMPLL */
 328                reg = __raw_readl(S5P_CLK_SRC0);
 329                reg &= ~(S5P_CLKSRC0_MUX200_MASK);
 330                reg |= (0x1 << S5P_CLKSRC0_MUX200_SHIFT);
 331                __raw_writel(reg, S5P_CLK_SRC0);
 332
 333                do {
 334                        reg = __raw_readl(S5P_CLKMUX_STAT0);
 335                } while (reg & (0x1 << 18));
 336
 337        }
 338
 339        /* Change divider */
 340        reg = __raw_readl(S5P_CLK_DIV0);
 341
 342        reg &= ~(S5P_CLKDIV0_APLL_MASK | S5P_CLKDIV0_A2M_MASK |
 343                S5P_CLKDIV0_HCLK200_MASK | S5P_CLKDIV0_PCLK100_MASK |
 344                S5P_CLKDIV0_HCLK166_MASK | S5P_CLKDIV0_PCLK83_MASK |
 345                S5P_CLKDIV0_HCLK133_MASK | S5P_CLKDIV0_PCLK66_MASK);
 346
 347        reg |= ((clkdiv_val[index][0] << S5P_CLKDIV0_APLL_SHIFT) |
 348                (clkdiv_val[index][1] << S5P_CLKDIV0_A2M_SHIFT) |
 349                (clkdiv_val[index][2] << S5P_CLKDIV0_HCLK200_SHIFT) |
 350                (clkdiv_val[index][3] << S5P_CLKDIV0_PCLK100_SHIFT) |
 351                (clkdiv_val[index][4] << S5P_CLKDIV0_HCLK166_SHIFT) |
 352                (clkdiv_val[index][5] << S5P_CLKDIV0_PCLK83_SHIFT) |
 353                (clkdiv_val[index][6] << S5P_CLKDIV0_HCLK133_SHIFT) |
 354                (clkdiv_val[index][7] << S5P_CLKDIV0_PCLK66_SHIFT));
 355
 356        __raw_writel(reg, S5P_CLK_DIV0);
 357
 358        do {
 359                reg = __raw_readl(S5P_CLKDIV_STAT0);
 360        } while (reg & 0xff);
 361
 362        /* ARM MCS value changed */
 363        reg = __raw_readl(S5P_ARM_MCS_CON);
 364        reg &= ~0x3;
 365        if (index >= L3)
 366                reg |= 0x3;
 367        else
 368                reg |= 0x1;
 369
 370        __raw_writel(reg, S5P_ARM_MCS_CON);
 371
 372        if (pll_changing) {
 373                /* 5. Set Lock time = 30us*24Mhz = 0x2cf */
 374                __raw_writel(0x2cf, S5P_APLL_LOCK);
 375
 376                /*
 377                 * 6. Turn on APLL
 378                 * 6-1. Set PMS values
 379                 * 6-2. Wait untile the PLL is locked
 380                 */
 381                if (index == L0)
 382                        __raw_writel(APLL_VAL_1000, S5P_APLL_CON);
 383                else
 384                        __raw_writel(APLL_VAL_800, S5P_APLL_CON);
 385
 386                do {
 387                        reg = __raw_readl(S5P_APLL_CON);
 388                } while (!(reg & (0x1 << 29)));
 389
 390                /*
 391                 * 7. Change souce clock from SCLKMPLL(667Mhz)
 392                 * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX
 393                 * (667/4=166)->(200/4=50)Mhz
 394                 */
 395                reg = __raw_readl(S5P_CLK_SRC2);
 396                reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK);
 397                reg |= (0 << S5P_CLKSRC2_G3D_SHIFT) |
 398                        (0 << S5P_CLKSRC2_MFC_SHIFT);
 399                __raw_writel(reg, S5P_CLK_SRC2);
 400
 401                do {
 402                        reg = __raw_readl(S5P_CLKMUX_STAT1);
 403                } while (reg & ((1 << 7) | (1 << 3)));
 404
 405                /*
 406                 * 8. Change divider for MFC and G3D
 407                 * (200/4=50)->(200/1=200)Mhz
 408                 */
 409                reg = __raw_readl(S5P_CLK_DIV2);
 410                reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK);
 411                reg |= (clkdiv_val[index][10] << S5P_CLKDIV2_G3D_SHIFT) |
 412                        (clkdiv_val[index][9] << S5P_CLKDIV2_MFC_SHIFT);
 413                __raw_writel(reg, S5P_CLK_DIV2);
 414
 415                /* For MFC, G3D dividing */
 416                do {
 417                        reg = __raw_readl(S5P_CLKDIV_STAT0);
 418                } while (reg & ((1 << 16) | (1 << 17)));
 419
 420                /* 9. Change MPLL to APLL in MSYS_MUX */
 421                reg = __raw_readl(S5P_CLK_SRC0);
 422                reg &= ~(S5P_CLKSRC0_MUX200_MASK);
 423                reg |= (0x0 << S5P_CLKSRC0_MUX200_SHIFT);
 424                __raw_writel(reg, S5P_CLK_SRC0);
 425
 426                do {
 427                        reg = __raw_readl(S5P_CLKMUX_STAT0);
 428                } while (reg & (0x1 << 18));
 429
 430                /*
 431                 * 10. DMC1 refresh counter
 432                 * L4 : DMC1 = 100Mhz 7.8us/(1/100) = 0x30c
 433                 * Others : DMC1 = 200Mhz 7.8us/(1/200) = 0x618
 434                 */
 435                if (!bus_speed_changing)
 436                        s5pv210_set_refresh(DMC1, 200000);
 437        }
 438
 439        /*
 440         * L4 level need to change memory bus speed, hence onedram clock divier
 441         * and memory refresh parameter should be changed
 442         */
 443        if (bus_speed_changing) {
 444                reg = __raw_readl(S5P_CLK_DIV6);
 445                reg &= ~S5P_CLKDIV6_ONEDRAM_MASK;
 446                reg |= (clkdiv_val[index][8] << S5P_CLKDIV6_ONEDRAM_SHIFT);
 447                __raw_writel(reg, S5P_CLK_DIV6);
 448
 449                do {
 450                        reg = __raw_readl(S5P_CLKDIV_STAT1);
 451                } while (reg & (1 << 15));
 452
 453                /* Reconfigure DRAM refresh counter value */
 454                if (index != L4) {
 455                        /*
 456                         * DMC0 : 166Mhz
 457                         * DMC1 : 200Mhz
 458                         */
 459                        s5pv210_set_refresh(DMC0, 166000);
 460                        s5pv210_set_refresh(DMC1, 200000);
 461                } else {
 462                        /*
 463                         * DMC0 : 83Mhz
 464                         * DMC1 : 100Mhz
 465                         */
 466                        s5pv210_set_refresh(DMC0, 83000);
 467                        s5pv210_set_refresh(DMC1, 100000);
 468                }
 469        }
 470
 471        cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 472
 473        if (freqs.new < freqs.old) {
 474                regulator_set_voltage(int_regulator,
 475                                int_volt, int_volt_max);
 476
 477                regulator_set_voltage(arm_regulator,
 478                                arm_volt, arm_volt_max);
 479        }
 480
 481        printk(KERN_DEBUG "Perf changed[L%d]\n", index);
 482
 483exit:
 484        mutex_unlock(&set_freq_lock);
 485        return ret;
 486}
 487
 488#ifdef CONFIG_PM
 489static int s5pv210_cpufreq_suspend(struct cpufreq_policy *policy)
 490{
 491        return 0;
 492}
 493
 494static int s5pv210_cpufreq_resume(struct cpufreq_policy *policy)
 495{
 496        return 0;
 497}
 498#endif
 499
 500static int check_mem_type(void __iomem *dmc_reg)
 501{
 502        unsigned long val;
 503
 504        val = __raw_readl(dmc_reg + 0x4);
 505        val = (val & (0xf << 8));
 506
 507        return val >> 8;
 508}
 509
 510static int __init s5pv210_cpu_init(struct cpufreq_policy *policy)
 511{
 512        unsigned long mem_type;
 513        int ret;
 514
 515        cpu_clk = clk_get(NULL, "armclk");
 516        if (IS_ERR(cpu_clk))
 517                return PTR_ERR(cpu_clk);
 518
 519        dmc0_clk = clk_get(NULL, "sclk_dmc0");
 520        if (IS_ERR(dmc0_clk)) {
 521                ret = PTR_ERR(dmc0_clk);
 522                goto out_dmc0;
 523        }
 524
 525        dmc1_clk = clk_get(NULL, "hclk_msys");
 526        if (IS_ERR(dmc1_clk)) {
 527                ret = PTR_ERR(dmc1_clk);
 528                goto out_dmc1;
 529        }
 530
 531        if (policy->cpu != 0) {
 532                ret = -EINVAL;
 533                goto out_dmc1;
 534        }
 535
 536        /*
 537         * check_mem_type : This driver only support LPDDR & LPDDR2.
 538         * other memory type is not supported.
 539         */
 540        mem_type = check_mem_type(S5P_VA_DMC0);
 541
 542        if ((mem_type != LPDDR) && (mem_type != LPDDR2)) {
 543                printk(KERN_ERR "CPUFreq doesn't support this memory type\n");
 544                ret = -EINVAL;
 545                goto out_dmc1;
 546        }
 547
 548        /* Find current refresh counter and frequency each DMC */
 549        s5pv210_dram_conf[0].refresh = (__raw_readl(S5P_VA_DMC0 + 0x30) * 1000);
 550        s5pv210_dram_conf[0].freq = clk_get_rate(dmc0_clk);
 551
 552        s5pv210_dram_conf[1].refresh = (__raw_readl(S5P_VA_DMC1 + 0x30) * 1000);
 553        s5pv210_dram_conf[1].freq = clk_get_rate(dmc1_clk);
 554
 555        policy->cur = policy->min = policy->max = s5pv210_getspeed(0);
 556
 557        cpufreq_frequency_table_get_attr(s5pv210_freq_table, policy->cpu);
 558
 559        policy->cpuinfo.transition_latency = 40000;
 560
 561        return cpufreq_frequency_table_cpuinfo(policy, s5pv210_freq_table);
 562
 563out_dmc1:
 564        clk_put(dmc0_clk);
 565out_dmc0:
 566        clk_put(cpu_clk);
 567        return ret;
 568}
 569
 570static int s5pv210_cpufreq_notifier_event(struct notifier_block *this,
 571                                          unsigned long event, void *ptr)
 572{
 573        int ret;
 574
 575        switch (event) {
 576        case PM_SUSPEND_PREPARE:
 577                ret = cpufreq_driver_target(cpufreq_cpu_get(0), SLEEP_FREQ,
 578                                            DISABLE_FURTHER_CPUFREQ);
 579                if (ret < 0)
 580                        return NOTIFY_BAD;
 581
 582                return NOTIFY_OK;
 583        case PM_POST_RESTORE:
 584        case PM_POST_SUSPEND:
 585                cpufreq_driver_target(cpufreq_cpu_get(0), SLEEP_FREQ,
 586                                      ENABLE_FURTHER_CPUFREQ);
 587
 588                return NOTIFY_OK;
 589        }
 590
 591        return NOTIFY_DONE;
 592}
 593
 594static int s5pv210_cpufreq_reboot_notifier_event(struct notifier_block *this,
 595                                                 unsigned long event, void *ptr)
 596{
 597        int ret;
 598
 599        ret = cpufreq_driver_target(cpufreq_cpu_get(0), SLEEP_FREQ,
 600                                    DISABLE_FURTHER_CPUFREQ);
 601        if (ret < 0)
 602                return NOTIFY_BAD;
 603
 604        return NOTIFY_DONE;
 605}
 606
 607static struct cpufreq_driver s5pv210_driver = {
 608        .flags          = CPUFREQ_STICKY,
 609        .verify         = s5pv210_verify_speed,
 610        .target         = s5pv210_target,
 611        .get            = s5pv210_getspeed,
 612        .init           = s5pv210_cpu_init,
 613        .name           = "s5pv210",
 614#ifdef CONFIG_PM
 615        .suspend        = s5pv210_cpufreq_suspend,
 616        .resume         = s5pv210_cpufreq_resume,
 617#endif
 618};
 619
 620static struct notifier_block s5pv210_cpufreq_notifier = {
 621        .notifier_call = s5pv210_cpufreq_notifier_event,
 622};
 623
 624static struct notifier_block s5pv210_cpufreq_reboot_notifier = {
 625        .notifier_call = s5pv210_cpufreq_reboot_notifier_event,
 626};
 627
 628static int __init s5pv210_cpufreq_init(void)
 629{
 630        arm_regulator = regulator_get(NULL, "vddarm");
 631        if (IS_ERR(arm_regulator)) {
 632                pr_err("failed to get regulator vddarm");
 633                return PTR_ERR(arm_regulator);
 634        }
 635
 636        int_regulator = regulator_get(NULL, "vddint");
 637        if (IS_ERR(int_regulator)) {
 638                pr_err("failed to get regulator vddint");
 639                regulator_put(arm_regulator);
 640                return PTR_ERR(int_regulator);
 641        }
 642
 643        register_pm_notifier(&s5pv210_cpufreq_notifier);
 644        register_reboot_notifier(&s5pv210_cpufreq_reboot_notifier);
 645
 646        return cpufreq_register_driver(&s5pv210_driver);
 647}
 648
 649late_initcall(s5pv210_cpufreq_init);
 650
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.