linux/drivers/uio/Kconfig
<<
>>
Prefs
   1menuconfig UIO
   2        tristate "Userspace I/O drivers"
   3        depends on !S390
   4        help
   5          Enable this to allow the userspace driver core code to be
   6          built.  This code allows userspace programs easy access to
   7          kernel interrupts and memory locations, allowing some drivers
   8          to be written in userspace.  Note that a small kernel driver
   9          is also required for interrupt handling to work properly.
  10
  11          If you don't know what to do here, say N.
  12
  13if UIO
  14
  15config UIO_CIF
  16        tristate "generic Hilscher CIF Card driver"
  17        depends on PCI
  18        help
  19          Driver for Hilscher CIF DeviceNet and Profibus cards.  This
  20          driver requires a userspace component called cif that handles
  21          all of the heavy lifting and can be found at:
  22                <http://www.osadl.org/projects/downloads/UIO/user/>
  23
  24          To compile this driver as a module, choose M here: the module
  25          will be called uio_cif.
  26
  27config UIO_PDRV
  28        tristate "Userspace I/O platform driver"
  29        help
  30          Generic platform driver for Userspace I/O devices.
  31
  32          If you don't know what to do here, say N.
  33
  34config UIO_PDRV_GENIRQ
  35        tristate "Userspace I/O platform driver with generic IRQ handling"
  36        help
  37          Platform driver for Userspace I/O devices, including generic
  38          interrupt handling code. Shared interrupts are not supported.
  39
  40          This kernel driver requires that the matching userspace driver
  41          handles interrupts in a special way. Userspace is responsible
  42          for acknowledging the hardware device if needed, and re-enabling
  43          interrupts in the interrupt controller using the write() syscall.
  44
  45          If you don't know what to do here, say N.
  46
  47config UIO_AEC
  48        tristate "AEC video timestamp device"
  49        depends on PCI
  50        help
  51
  52          UIO driver for the Adrienne Electronics Corporation PCI time
  53          code device.
  54
  55          This device differs from other UIO devices since it uses I/O
  56          ports instead of memory mapped I/O. In order to make it
  57          possible for UIO to work with this device a utility, uioport,
  58          can be used to read and write the ports:
  59
  60            git clone git://ifup.org/philips/uioport.git
  61
  62          If you compile this as a module, it will be called uio_aec.
  63
  64config UIO_SERCOS3
  65        tristate "Automata Sercos III PCI card driver"
  66        depends on PCI
  67        help
  68          Userspace I/O interface for the Sercos III PCI card from
  69          Automata GmbH. The userspace part of this driver will be
  70          available for download from the Automata GmbH web site.
  71
  72          Automata GmbH:        http://www.automataweb.com
  73          Sercos III interface: http://www.sercos.com
  74
  75          If you compile this as a module, it will be called uio_sercos3.
  76
  77config UIO_PCI_GENERIC
  78        tristate "Generic driver for PCI 2.3 and PCI Express cards"
  79        depends on PCI
  80        help
  81          Generic driver that you can bind, dynamically, to any
  82          PCI 2.3 compliant and PCI Express card. It is useful,
  83          primarily, for virtualization scenarios.
  84          If you compile this as a module, it will be called uio_pci_generic.
  85
  86config UIO_NETX
  87        tristate "Hilscher NetX Card driver"
  88        depends on PCI
  89        help
  90          Driver for Hilscher NetX based fieldbus cards (cifX, comX).
  91          This driver requires a userspace component that comes with the card
  92          or is available from Hilscher (http://www.hilscher.com).
  93
  94          To compile this driver as a module, choose M here; the module
  95          will be called uio_netx.
  96
  97config UIO_PRUSS
  98        tristate "Texas Instruments PRUSS driver"
  99        depends on ARCH_DAVINCI_DA850
 100        help
 101          PRUSS driver for OMAPL138/DA850/AM18XX devices
 102          PRUSS driver requires user space components, examples and user space
 103          driver is available from below SVN repo - you may use anonymous login
 104
 105          https://gforge.ti.com/gf/project/pru_sw/
 106
 107          More info on API is available at below wiki
 108
 109          http://processors.wiki.ti.com/index.php/PRU_Linux_Application_Loader
 110
 111          To compile this driver as a module, choose M here: the module
 112          will be called uio_pruss.
 113
 114endif
 115
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.