linux/drivers/regulator/s2mps11.c
<<
>>
Prefs
   1/*
   2 * s2mps11.c
   3 *
   4 * Copyright (c) 2012 Samsung Electronics Co., Ltd
   5 *              http://www.samsung.com
   6 *
   7 *  This program is free software; you can redistribute  it and/or modify it
   8 *  under  the terms of  the GNU General  Public License as published by the
   9 *  Free Software Foundation;  either version 2 of the  License, or (at your
  10 *  option) any later version.
  11 *
  12 */
  13
  14#include <linux/bug.h>
  15#include <linux/delay.h>
  16#include <linux/err.h>
  17#include <linux/gpio.h>
  18#include <linux/slab.h>
  19#include <linux/module.h>
  20#include <linux/platform_device.h>
  21#include <linux/regulator/driver.h>
  22#include <linux/regulator/machine.h>
  23#include <linux/mfd/samsung/core.h>
  24#include <linux/mfd/samsung/s2mps11.h>
  25
  26struct s2mps11_info {
  27        struct regulator_dev *rdev[S2MPS11_REGULATOR_MAX];
  28
  29        int ramp_delay2;
  30        int ramp_delay34;
  31        int ramp_delay5;
  32        int ramp_delay16;
  33        int ramp_delay7810;
  34        int ramp_delay9;
  35
  36        bool buck6_ramp;
  37        bool buck2_ramp;
  38        bool buck3_ramp;
  39        bool buck4_ramp;
  40};
  41
  42static int get_ramp_delay(int ramp_delay)
  43{
  44        unsigned char cnt = 0;
  45
  46        ramp_delay /= 6;
  47
  48        while (true) {
  49                ramp_delay = ramp_delay >> 1;
  50                if (ramp_delay == 0)
  51                        break;
  52                cnt++;
  53        }
  54        return cnt;
  55}
  56
  57static struct regulator_ops s2mps11_ldo_ops = {
  58        .list_voltage           = regulator_list_voltage_linear,
  59        .map_voltage            = regulator_map_voltage_linear,
  60        .is_enabled             = regulator_is_enabled_regmap,
  61        .enable                 = regulator_enable_regmap,
  62        .disable                = regulator_disable_regmap,
  63        .get_voltage_sel        = regulator_get_voltage_sel_regmap,
  64        .set_voltage_sel        = regulator_set_voltage_sel_regmap,
  65        .set_voltage_time_sel   = regulator_set_voltage_time_sel,
  66};
  67
  68static struct regulator_ops s2mps11_buck_ops = {
  69        .list_voltage           = regulator_list_voltage_linear,
  70        .map_voltage            = regulator_map_voltage_linear,
  71        .is_enabled             = regulator_is_enabled_regmap,
  72        .enable                 = regulator_enable_regmap,
  73        .disable                = regulator_disable_regmap,
  74        .get_voltage_sel        = regulator_get_voltage_sel_regmap,
  75        .set_voltage_sel        = regulator_set_voltage_sel_regmap,
  76        .set_voltage_time_sel   = regulator_set_voltage_time_sel,
  77};
  78
  79#define regulator_desc_ldo1(num)        {               \
  80        .name           = "LDO"#num,                    \
  81        .id             = S2MPS11_LDO##num,             \
  82        .ops            = &s2mps11_ldo_ops,             \
  83        .type           = REGULATOR_VOLTAGE,            \
  84        .owner          = THIS_MODULE,                  \
  85        .min_uV         = S2MPS11_LDO_MIN,              \
  86        .uV_step        = S2MPS11_LDO_STEP1,            \
  87        .n_voltages     = S2MPS11_LDO_N_VOLTAGES,       \
  88        .vsel_reg       = S2MPS11_REG_L1CTRL + num - 1, \
  89        .vsel_mask      = S2MPS11_LDO_VSEL_MASK,        \
  90        .enable_reg     = S2MPS11_REG_L1CTRL + num - 1, \
  91        .enable_mask    = S2MPS11_ENABLE_MASK           \
  92}
  93#define regulator_desc_ldo2(num)        {               \
  94        .name           = "LDO"#num,                    \
  95        .id             = S2MPS11_LDO##num,             \
  96        .ops            = &s2mps11_ldo_ops,             \
  97        .type           = REGULATOR_VOLTAGE,            \
  98        .owner          = THIS_MODULE,                  \
  99        .min_uV         = S2MPS11_LDO_MIN,              \
 100        .uV_step        = S2MPS11_LDO_STEP2,            \
 101        .n_voltages     = S2MPS11_LDO_N_VOLTAGES,       \
 102        .vsel_reg       = S2MPS11_REG_L1CTRL + num - 1, \
 103        .vsel_mask      = S2MPS11_LDO_VSEL_MASK,        \
 104        .enable_reg     = S2MPS11_REG_L1CTRL + num - 1, \
 105        .enable_mask    = S2MPS11_ENABLE_MASK           \
 106}
 107
 108#define regulator_desc_buck1_4(num)     {                       \
 109        .name           = "BUCK"#num,                           \
 110        .id             = S2MPS11_BUCK##num,                    \
 111        .ops            = &s2mps11_buck_ops,                    \
 112        .type           = REGULATOR_VOLTAGE,                    \
 113        .owner          = THIS_MODULE,                          \
 114        .min_uV         = S2MPS11_BUCK_MIN1,                    \
 115        .uV_step        = S2MPS11_BUCK_STEP1,                   \
 116        .n_voltages     = S2MPS11_BUCK_N_VOLTAGES,              \
 117        .vsel_reg       = S2MPS11_REG_B1CTRL2 + (num - 1) * 2,  \
 118        .vsel_mask      = S2MPS11_BUCK_VSEL_MASK,               \
 119        .enable_reg     = S2MPS11_REG_B1CTRL1 + (num - 1) * 2,  \
 120        .enable_mask    = S2MPS11_ENABLE_MASK                   \
 121}
 122
 123#define regulator_desc_buck5    {                               \
 124        .name           = "BUCK5",                              \
 125        .id             = S2MPS11_BUCK5,                        \
 126        .ops            = &s2mps11_buck_ops,                    \
 127        .type           = REGULATOR_VOLTAGE,                    \
 128        .owner          = THIS_MODULE,                          \
 129        .min_uV         = S2MPS11_BUCK_MIN1,                    \
 130        .uV_step        = S2MPS11_BUCK_STEP1,                   \
 131        .n_voltages     = S2MPS11_BUCK_N_VOLTAGES,              \
 132        .vsel_reg       = S2MPS11_REG_B5CTRL2,                  \
 133        .vsel_mask      = S2MPS11_BUCK_VSEL_MASK,               \
 134        .enable_reg     = S2MPS11_REG_B5CTRL1,                  \
 135        .enable_mask    = S2MPS11_ENABLE_MASK                   \
 136}
 137
 138#define regulator_desc_buck6_8(num)     {                       \
 139        .name           = "BUCK"#num,                           \
 140        .id             = S2MPS11_BUCK##num,                    \
 141        .ops            = &s2mps11_buck_ops,                    \
 142        .type           = REGULATOR_VOLTAGE,                    \
 143        .owner          = THIS_MODULE,                          \
 144        .min_uV         = S2MPS11_BUCK_MIN1,                    \
 145        .uV_step        = S2MPS11_BUCK_STEP1,                   \
 146        .n_voltages     = S2MPS11_BUCK_N_VOLTAGES,              \
 147        .vsel_reg       = S2MPS11_REG_B6CTRL2 + (num - 6) * 2,  \
 148        .vsel_mask      = S2MPS11_BUCK_VSEL_MASK,               \
 149        .enable_reg     = S2MPS11_REG_B6CTRL1 + (num - 6) * 2,  \
 150        .enable_mask    = S2MPS11_ENABLE_MASK                   \
 151}
 152
 153#define regulator_desc_buck9    {                               \
 154        .name           = "BUCK9",                              \
 155        .id             = S2MPS11_BUCK9,                        \
 156        .ops            = &s2mps11_buck_ops,                    \
 157        .type           = REGULATOR_VOLTAGE,                    \
 158        .owner          = THIS_MODULE,                          \
 159        .min_uV         = S2MPS11_BUCK_MIN3,                    \
 160        .uV_step        = S2MPS11_BUCK_STEP3,                   \
 161        .n_voltages     = S2MPS11_BUCK_N_VOLTAGES,              \
 162        .vsel_reg       = S2MPS11_REG_B9CTRL2,                  \
 163        .vsel_mask      = S2MPS11_BUCK_VSEL_MASK,               \
 164        .enable_reg     = S2MPS11_REG_B9CTRL1,                  \
 165        .enable_mask    = S2MPS11_ENABLE_MASK                   \
 166}
 167
 168#define regulator_desc_buck10   {                               \
 169        .name           = "BUCK10",                             \
 170        .id             = S2MPS11_BUCK10,                       \
 171        .ops            = &s2mps11_buck_ops,                    \
 172        .type           = REGULATOR_VOLTAGE,                    \
 173        .owner          = THIS_MODULE,                          \
 174        .min_uV         = S2MPS11_BUCK_MIN2,                    \
 175        .uV_step        = S2MPS11_BUCK_STEP2,                   \
 176        .n_voltages     = S2MPS11_BUCK_N_VOLTAGES,              \
 177        .vsel_reg       = S2MPS11_REG_B9CTRL2,                  \
 178        .vsel_mask      = S2MPS11_BUCK_VSEL_MASK,               \
 179        .enable_reg     = S2MPS11_REG_B9CTRL1,                  \
 180        .enable_mask    = S2MPS11_ENABLE_MASK                   \
 181}
 182
 183static struct regulator_desc regulators[] = {
 184        regulator_desc_ldo2(1),
 185        regulator_desc_ldo1(2),
 186        regulator_desc_ldo1(3),
 187        regulator_desc_ldo1(4),
 188        regulator_desc_ldo1(5),
 189        regulator_desc_ldo2(6),
 190        regulator_desc_ldo1(7),
 191        regulator_desc_ldo1(8),
 192        regulator_desc_ldo1(9),
 193        regulator_desc_ldo1(10),
 194        regulator_desc_ldo2(11),
 195        regulator_desc_ldo1(12),
 196        regulator_desc_ldo1(13),
 197        regulator_desc_ldo1(14),
 198        regulator_desc_ldo1(15),
 199        regulator_desc_ldo1(16),
 200        regulator_desc_ldo1(17),
 201        regulator_desc_ldo1(18),
 202        regulator_desc_ldo1(19),
 203        regulator_desc_ldo1(20),
 204        regulator_desc_ldo1(21),
 205        regulator_desc_ldo2(22),
 206        regulator_desc_ldo2(23),
 207        regulator_desc_ldo1(24),
 208        regulator_desc_ldo1(25),
 209        regulator_desc_ldo1(26),
 210        regulator_desc_ldo2(27),
 211        regulator_desc_ldo1(28),
 212        regulator_desc_ldo1(29),
 213        regulator_desc_ldo1(30),
 214        regulator_desc_ldo1(31),
 215        regulator_desc_ldo1(32),
 216        regulator_desc_ldo1(33),
 217        regulator_desc_ldo1(34),
 218        regulator_desc_ldo1(35),
 219        regulator_desc_ldo1(36),
 220        regulator_desc_ldo1(37),
 221        regulator_desc_ldo1(38),
 222        regulator_desc_buck1_4(1),
 223        regulator_desc_buck1_4(2),
 224        regulator_desc_buck1_4(3),
 225        regulator_desc_buck1_4(4),
 226        regulator_desc_buck5,
 227        regulator_desc_buck6_8(6),
 228        regulator_desc_buck6_8(7),
 229        regulator_desc_buck6_8(8),
 230        regulator_desc_buck9,
 231        regulator_desc_buck10,
 232};
 233
 234static __devinit int s2mps11_pmic_probe(struct platform_device *pdev)
 235{
 236        struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
 237        struct sec_platform_data *pdata = dev_get_platdata(iodev->dev);
 238        struct regulator_config config = { };
 239        struct s2mps11_info *s2mps11;
 240        int i, ret;
 241        unsigned char ramp_enable, ramp_reg = 0;
 242
 243        if (!pdata) {
 244                dev_err(pdev->dev.parent, "Platform data not supplied\n");
 245                return -ENODEV;
 246        }
 247
 248        s2mps11 = devm_kzalloc(&pdev->dev, sizeof(struct s2mps11_info),
 249                                GFP_KERNEL);
 250        if (!s2mps11)
 251                return -ENOMEM;
 252
 253        platform_set_drvdata(pdev, s2mps11);
 254
 255        s2mps11->ramp_delay2 = pdata->buck2_ramp_delay;
 256        s2mps11->ramp_delay34 = pdata->buck34_ramp_delay;
 257        s2mps11->ramp_delay5 = pdata->buck5_ramp_delay;
 258        s2mps11->ramp_delay16 = pdata->buck16_ramp_delay;
 259        s2mps11->ramp_delay7810 = pdata->buck7810_ramp_delay;
 260        s2mps11->ramp_delay9 = pdata->buck9_ramp_delay;
 261
 262        s2mps11->buck6_ramp = pdata->buck6_ramp_enable;
 263        s2mps11->buck2_ramp = pdata->buck2_ramp_enable;
 264        s2mps11->buck3_ramp = pdata->buck3_ramp_enable;
 265        s2mps11->buck4_ramp = pdata->buck4_ramp_enable;
 266
 267        ramp_enable = (s2mps11->buck2_ramp << 3) | (s2mps11->buck3_ramp << 2) |
 268                (s2mps11->buck4_ramp << 1) | s2mps11->buck6_ramp ;
 269
 270        if (ramp_enable) {
 271                if (s2mps11->buck2_ramp)
 272                        ramp_reg |= get_ramp_delay(s2mps11->ramp_delay2) << 6;
 273                if (s2mps11->buck3_ramp || s2mps11->buck4_ramp)
 274                        ramp_reg |= get_ramp_delay(s2mps11->ramp_delay34) << 4;
 275                sec_reg_write(iodev, S2MPS11_REG_RAMP, ramp_reg | ramp_enable);
 276        }
 277
 278        ramp_reg &= 0x00;
 279        ramp_reg |= get_ramp_delay(s2mps11->ramp_delay5) << 6;
 280        ramp_reg |= get_ramp_delay(s2mps11->ramp_delay16) << 4;
 281        ramp_reg |= get_ramp_delay(s2mps11->ramp_delay7810) << 2;
 282        ramp_reg |= get_ramp_delay(s2mps11->ramp_delay9);
 283        sec_reg_write(iodev, S2MPS11_REG_RAMP_BUCK, ramp_reg);
 284
 285        for (i = 0; i < S2MPS11_REGULATOR_MAX; i++) {
 286
 287                config.dev = &pdev->dev;
 288                config.regmap = iodev->regmap;
 289                config.init_data = pdata->regulators[i].initdata;
 290                config.driver_data = s2mps11;
 291
 292                s2mps11->rdev[i] = regulator_register(&regulators[i], &config);
 293                if (IS_ERR(s2mps11->rdev[i])) {
 294                        ret = PTR_ERR(s2mps11->rdev[i]);
 295                        dev_err(&pdev->dev, "regulator init failed for %d\n",
 296                                i);
 297                        s2mps11->rdev[i] = NULL;
 298                        goto err;
 299                }
 300        }
 301
 302        return 0;
 303err:
 304        for (i = 0; i < S2MPS11_REGULATOR_MAX; i++)
 305                regulator_unregister(s2mps11->rdev[i]);
 306
 307        return ret;
 308}
 309
 310static int __devexit s2mps11_pmic_remove(struct platform_device *pdev)
 311{
 312        struct s2mps11_info *s2mps11 = platform_get_drvdata(pdev);
 313        int i;
 314
 315        for (i = 0; i < S2MPS11_REGULATOR_MAX; i++)
 316                regulator_unregister(s2mps11->rdev[i]);
 317
 318        return 0;
 319}
 320
 321static const struct platform_device_id s2mps11_pmic_id[] = {
 322        { "s2mps11-pmic", 0},
 323        { },
 324};
 325MODULE_DEVICE_TABLE(platform, s2mps11_pmic_id);
 326
 327static struct platform_driver s2mps11_pmic_driver = {
 328        .driver = {
 329                .name = "s2mps11-pmic",
 330                .owner = THIS_MODULE,
 331        },
 332        .probe = s2mps11_pmic_probe,
 333        .remove = __devexit_p(s2mps11_pmic_remove),
 334        .id_table = s2mps11_pmic_id,
 335};
 336
 337static int __init s2mps11_pmic_init(void)
 338{
 339        return platform_driver_register(&s2mps11_pmic_driver);
 340}
 341subsys_initcall(s2mps11_pmic_init);
 342
 343static void __exit s2mps11_pmic_exit(void)
 344{
 345        platform_driver_unregister(&s2mps11_pmic_driver);
 346}
 347module_exit(s2mps11_pmic_exit);
 348
 349/* Module information */
 350MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
 351MODULE_DESCRIPTION("SAMSUNG S2MPS11 Regulator Driver");
 352MODULE_LICENSE("GPL");
 353
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.