linux/Documentation/hwmon/ltc2978
<<
>>
Prefs
   1Kernel driver ltc2978
   2=====================
   3
   4Supported chips:
   5  * Linear Technology LTC2978
   6    Prefix: 'ltc2978'
   7    Addresses scanned: -
   8    Datasheet: http://cds.linear.com/docs/Datasheet/2978fa.pdf
   9  * Linear Technology LTC3880
  10    Prefix: 'ltc3880'
  11    Addresses scanned: -
  12    Datasheet: http://cds.linear.com/docs/Datasheet/3880f.pdf
  13
  14Author: Guenter Roeck <guenter.roeck@ericsson.com>
  15
  16
  17Description
  18-----------
  19
  20The LTC2978 is an octal power supply monitor, supervisor, sequencer and
  21margin controller. The LTC3880 is a dual, PolyPhase DC/DC synchronous
  22step-down switching regulator controller.
  23
  24
  25Usage Notes
  26-----------
  27
  28This driver does not probe for PMBus devices. You will have to instantiate
  29devices explicitly.
  30
  31Example: the following commands will load the driver for an LTC2978 at address
  320x60 on I2C bus #1:
  33
  34# modprobe ltc2978
  35# echo ltc2978 0x60 > /sys/bus/i2c/devices/i2c-1/new_device
  36
  37
  38Sysfs attributes
  39----------------
  40
  41in1_label               "vin"
  42in1_input               Measured input voltage.
  43in1_min                 Minimum input voltage.
  44in1_max                 Maximum input voltage.
  45in1_lcrit               Critical minimum input voltage.
  46in1_crit                Critical maximum input voltage.
  47in1_min_alarm           Input voltage low alarm.
  48in1_max_alarm           Input voltage high alarm.
  49in1_lcrit_alarm         Input voltage critical low alarm.
  50in1_crit_alarm          Input voltage critical high alarm.
  51in1_lowest              Lowest input voltage. LTC2978 only.
  52in1_highest             Highest input voltage.
  53in1_reset_history       Reset history. Writing into this attribute will reset
  54                        history for all attributes.
  55
  56in[2-9]_label           "vout[1-8]". Channels 3 to 9 on LTC2978 only.
  57in[2-9]_input           Measured output voltage.
  58in[2-9]_min             Minimum output voltage.
  59in[2-9]_max             Maximum output voltage.
  60in[2-9]_lcrit           Critical minimum output voltage.
  61in[2-9]_crit            Critical maximum output voltage.
  62in[2-9]_min_alarm       Output voltage low alarm.
  63in[2-9]_max_alarm       Output voltage high alarm.
  64in[2-9]_lcrit_alarm     Output voltage critical low alarm.
  65in[2-9]_crit_alarm      Output voltage critical high alarm.
  66in[2-9]_lowest          Lowest output voltage. LTC2978 only.
  67in[2-9]_highest         Lowest output voltage.
  68in[2-9]_reset_history   Reset history. Writing into this attribute will reset
  69                        history for all attributes.
  70
  71temp[1-3]_input         Measured temperature.
  72                        On LTC2978, only one temperature measurement is
  73                        supported and reflects the internal temperature.
  74                        On LTC3880, temp1 and temp2 report external
  75                        temperatures, and temp3 reports the internal
  76                        temperature.
  77temp[1-3]_min           Mimimum temperature.
  78temp[1-3]_max           Maximum temperature.
  79temp[1-3]_lcrit         Critical low temperature.
  80temp[1-3]_crit          Critical high temperature.
  81temp[1-3]_min_alarm     Chip temperature low alarm.
  82temp[1-3]_max_alarm     Chip temperature high alarm.
  83temp[1-3]_lcrit_alarm   Chip temperature critical low alarm.
  84temp[1-3]_crit_alarm    Chip temperature critical high alarm.
  85temp[1-3]_lowest        Lowest measured temperature. LTC2978 only.
  86temp[1-3]_highest       Highest measured temperature.
  87temp[1-3]_reset_history Reset history. Writing into this attribute will reset
  88                        history for all attributes.
  89
  90power[1-2]_label        "pout[1-2]". LTC3880 only.
  91power[1-2]_input        Measured power.
  92
  93curr1_label             "iin". LTC3880 only.
  94curr1_input             Measured input current.
  95curr1_max               Maximum input current.
  96curr1_max_alarm         Input current high alarm.
  97
  98curr[2-3]_label         "iout[1-2]". LTC3880 only.
  99curr[2-3]_input         Measured input current.
 100curr[2-3]_max           Maximum input current.
 101curr[2-3]_crit          Critical input current.
 102curr[2-3]_max_alarm     Input current high alarm.
 103curr[2-3]_crit_alarm    Input current critical high alarm.
 104
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.