linux/drivers/ata/pata_cs5535.c
<<
>>
Prefs
   1/*
   2 * pata-cs5535.c        - CS5535 PATA for new ATA layer
   3 *                        (C) 2005-2006 Red Hat Inc
   4 *                        Alan Cox <alan@lxorguk.ukuu.org.uk>
   5 *
   6 * based upon cs5535.c from AMD <Jens.Altmann@amd.com> as cleaned up and
   7 * made readable and Linux style by Wolfgang Zuleger <wolfgang.zuleger@gmx.de>
   8 * and Alexander Kiausch <alex.kiausch@t-online.de>
   9 *
  10 * This program is free software; you can redistribute it and/or modify
  11 * it under the terms of the GNU General Public License version 2 as
  12 * published by the Free Software Foundation.
  13 *
  14 * This program is distributed in the hope that it will be useful,
  15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17 * GNU General Public License for more details.
  18 *
  19 * You should have received a copy of the GNU General Public License
  20 * along with this program; if not, write to the Free Software
  21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  22 *
  23 * Loosely based on the piix & svwks drivers.
  24 *
  25 * Documentation:
  26 *      Available from AMD web site.
  27 * TODO
  28 *      Review errata to see if serializing is necessary
  29 */
  30
  31#include <linux/kernel.h>
  32#include <linux/module.h>
  33#include <linux/pci.h>
  34#include <linux/init.h>
  35#include <linux/blkdev.h>
  36#include <linux/delay.h>
  37#include <scsi/scsi_host.h>
  38#include <linux/libata.h>
  39#include <asm/msr.h>
  40
  41#define DRV_NAME        "pata_cs5535"
  42#define DRV_VERSION     "0.2.12"
  43
  44/*
  45 *      The Geode (Aka Athlon GX now) uses an internal MSR based
  46 *      bus system for control. Demented but there you go.
  47 */
  48
  49#define MSR_ATAC_BASE           0x51300000
  50#define ATAC_GLD_MSR_CAP        (MSR_ATAC_BASE+0)
  51#define ATAC_GLD_MSR_CONFIG    (MSR_ATAC_BASE+0x01)
  52#define ATAC_GLD_MSR_SMI       (MSR_ATAC_BASE+0x02)
  53#define ATAC_GLD_MSR_ERROR     (MSR_ATAC_BASE+0x03)
  54#define ATAC_GLD_MSR_PM        (MSR_ATAC_BASE+0x04)
  55#define ATAC_GLD_MSR_DIAG      (MSR_ATAC_BASE+0x05)
  56#define ATAC_IO_BAR            (MSR_ATAC_BASE+0x08)
  57#define ATAC_RESET             (MSR_ATAC_BASE+0x10)
  58#define ATAC_CH0D0_PIO         (MSR_ATAC_BASE+0x20)
  59#define ATAC_CH0D0_DMA         (MSR_ATAC_BASE+0x21)
  60#define ATAC_CH0D1_PIO         (MSR_ATAC_BASE+0x22)
  61#define ATAC_CH0D1_DMA         (MSR_ATAC_BASE+0x23)
  62#define ATAC_PCI_ABRTERR       (MSR_ATAC_BASE+0x24)
  63
  64#define ATAC_BM0_CMD_PRIM      0x00
  65#define ATAC_BM0_STS_PRIM      0x02
  66#define ATAC_BM0_PRD           0x04
  67
  68#define CS5535_CABLE_DETECT    0x48
  69
  70/**
  71 *      cs5535_cable_detect     -       detect cable type
  72 *      @ap: Port to detect on
  73 *
  74 *      Perform cable detection for ATA66 capable cable. Return a libata
  75 *      cable type.
  76 */
  77
  78static int cs5535_cable_detect(struct ata_port *ap)
  79{
  80        u8 cable;
  81        struct pci_dev *pdev = to_pci_dev(ap->host->dev);
  82
  83        pci_read_config_byte(pdev, CS5535_CABLE_DETECT, &cable);
  84        if (cable & 1)
  85                return ATA_CBL_PATA80;
  86        else
  87                return ATA_CBL_PATA40;
  88}
  89
  90/**
  91 *      cs5535_set_piomode              -       PIO setup
  92 *      @ap: ATA interface
  93 *      @adev: device on the interface
  94 *
  95 *      Set our PIO requirements. The CS5535 is pretty clean about all this
  96 */
  97
  98static void cs5535_set_piomode(struct ata_port *ap, struct ata_device *adev)
  99{
 100        static const u16 pio_timings[5] = {
 101                0xF7F4, 0xF173, 0x8141, 0x5131, 0x1131
 102        };
 103        static const u16 pio_cmd_timings[5] = {
 104                0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131
 105        };
 106        u32 reg, dummy;
 107        struct ata_device *pair = ata_dev_pair(adev);
 108
 109        int mode = adev->pio_mode - XFER_PIO_0;
 110        int cmdmode = mode;
 111
 112        /* Command timing has to be for the lowest of the pair of devices */
 113        if (pair) {
 114                int pairmode = pair->pio_mode - XFER_PIO_0;
 115                cmdmode = min(mode, pairmode);
 116                /* Write the other drive timing register if it changed */
 117                if (cmdmode < pairmode)
 118                        wrmsr(ATAC_CH0D0_PIO + 2 * pair->devno,
 119                                pio_cmd_timings[cmdmode] << 16 | pio_timings[pairmode], 0);
 120        }
 121        /* Write the drive timing register */
 122        wrmsr(ATAC_CH0D0_PIO + 2 * adev->devno,
 123                pio_cmd_timings[cmdmode] << 16 | pio_timings[mode], 0);
 124
 125        /* Set the PIO "format 1" bit in the DMA timing register */
 126        rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy);
 127        wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg | 0x80000000UL, 0);
 128}
 129
 130/**
 131 *      cs5535_set_dmamode              -       DMA timing setup
 132 *      @ap: ATA interface
 133 *      @adev: Device being configured
 134 *
 135 */
 136
 137static void cs5535_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 138{
 139        static const u32 udma_timings[5] = {
 140                0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061
 141        };
 142        static const u32 mwdma_timings[3] = {
 143                0x7F0FFFF3, 0x7F035352, 0x7F024241
 144        };
 145        u32 reg, dummy;
 146        int mode = adev->dma_mode;
 147
 148        rdmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, dummy);
 149        reg &= 0x80000000UL;
 150        if (mode >= XFER_UDMA_0)
 151                reg |= udma_timings[mode - XFER_UDMA_0];
 152        else
 153                reg |= mwdma_timings[mode - XFER_MW_DMA_0];
 154        wrmsr(ATAC_CH0D0_DMA + 2 * adev->devno, reg, 0);
 155}
 156
 157static struct scsi_host_template cs5535_sht = {
 158        ATA_BMDMA_SHT(DRV_NAME),
 159};
 160
 161static struct ata_port_operations cs5535_port_ops = {
 162        .inherits       = &ata_bmdma_port_ops,
 163        .cable_detect   = cs5535_cable_detect,
 164        .set_piomode    = cs5535_set_piomode,
 165        .set_dmamode    = cs5535_set_dmamode,
 166};
 167
 168/**
 169 *      cs5535_init_one         -       Initialise a CS5530
 170 *      @dev: PCI device
 171 *      @id: Entry in match table
 172 *
 173 *      Install a driver for the newly found CS5530 companion chip. Most of
 174 *      this is just housekeeping. We have to set the chip up correctly and
 175 *      turn off various bits of emulation magic.
 176 */
 177
 178static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 179{
 180        static const struct ata_port_info info = {
 181                .flags = ATA_FLAG_SLAVE_POSS,
 182                .pio_mask = ATA_PIO4,
 183                .mwdma_mask = ATA_MWDMA2,
 184                .udma_mask = ATA_UDMA4,
 185                .port_ops = &cs5535_port_ops
 186        };
 187        const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
 188
 189        return ata_pci_bmdma_init_one(dev, ppi, &cs5535_sht, NULL, 0);
 190}
 191
 192static const struct pci_device_id cs5535[] = {
 193        { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_CS5535_IDE), },
 194        { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5535_IDE), },
 195
 196        { },
 197};
 198
 199static struct pci_driver cs5535_pci_driver = {
 200        .name           = DRV_NAME,
 201        .id_table       = cs5535,
 202        .probe          = cs5535_init_one,
 203        .remove         = ata_pci_remove_one,
 204#ifdef CONFIG_PM
 205        .suspend        = ata_pci_device_suspend,
 206        .resume         = ata_pci_device_resume,
 207#endif
 208};
 209
 210module_pci_driver(cs5535_pci_driver);
 211
 212MODULE_AUTHOR("Alan Cox, Jens Altmann, Wolfgan Zuleger, Alexander Kiausch");
 213MODULE_DESCRIPTION("low-level driver for the NS/AMD 5535");
 214MODULE_LICENSE("GPL");
 215MODULE_DEVICE_TABLE(pci, cs5535);
 216MODULE_VERSION(DRV_VERSION);
 217
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.