linux/drivers/video/Kconfig
<<
>>
Prefs
   1#
   2# Video configuration
   3#
   4
   5menu "Graphics support"
   6        depends on HAS_IOMEM
   7
   8config HAVE_FB_ATMEL
   9        bool
  10
  11config SH_MIPI_DSI
  12        tristate
  13        depends on (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
  14
  15config SH_LCD_MIPI_DSI
  16        bool
  17
  18source "drivers/char/agp/Kconfig"
  19
  20source "drivers/gpu/vga/Kconfig"
  21
  22source "drivers/gpu/drm/Kconfig"
  23
  24source "drivers/gpu/stub/Kconfig"
  25
  26config VGASTATE
  27       tristate
  28       default n
  29
  30config VIDEO_OUTPUT_CONTROL
  31        tristate "Lowlevel video output switch controls"
  32        help
  33          This framework adds support for low-level control of the video 
  34          output switch.
  35
  36menuconfig FB
  37        tristate "Support for frame buffer devices"
  38        ---help---
  39          The frame buffer device provides an abstraction for the graphics
  40          hardware. It represents the frame buffer of some video hardware and
  41          allows application software to access the graphics hardware through
  42          a well-defined interface, so the software doesn't need to know
  43          anything about the low-level (hardware register) stuff.
  44
  45          Frame buffer devices work identically across the different
  46          architectures supported by Linux and make the implementation of
  47          application programs easier and more portable; at this point, an X
  48          server exists which uses the frame buffer device exclusively.
  49          On several non-X86 architectures, the frame buffer device is the
  50          only way to use the graphics hardware.
  51
  52          The device is accessed through special device nodes, usually located
  53          in the /dev directory, i.e. /dev/fb*.
  54
  55          You need an utility program called fbset to make full use of frame
  56          buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
  57          and the Framebuffer-HOWTO at
  58          <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
  59          information.
  60
  61          Say Y here and to the driver for your graphics board below if you
  62          are compiling a kernel for a non-x86 architecture.
  63
  64          If you are compiling for the x86 architecture, you can say Y if you
  65          want to play with it, but it is not essential. Please note that
  66          running graphical applications that directly touch the hardware
  67          (e.g. an accelerated X server) and that are not frame buffer
  68          device-aware may cause unexpected results. If unsure, say N.
  69
  70config FIRMWARE_EDID
  71       bool "Enable firmware EDID"
  72       depends on FB
  73       default n
  74       ---help---
  75         This enables access to the EDID transferred from the firmware.
  76         On the i386, this is from the Video BIOS. Enable this if DDC/I2C
  77         transfers do not work for your driver and if you are using
  78         nvidiafb, i810fb or savagefb.
  79
  80         In general, choosing Y for this option is safe.  If you
  81         experience extremely long delays while booting before you get
  82         something on your display, try setting this to N.  Matrox cards in
  83         combination with certain motherboards and monitors are known to
  84         suffer from this problem.
  85
  86config FB_DDC
  87       tristate
  88       depends on FB
  89       select I2C_ALGOBIT
  90       select I2C
  91       default n
  92
  93config FB_BOOT_VESA_SUPPORT
  94        bool
  95        depends on FB
  96        default n
  97        ---help---
  98          If true, at least one selected framebuffer driver can take advantage
  99          of VESA video modes set at an early boot stage via the vga= parameter.
 100
 101config FB_CFB_FILLRECT
 102        tristate
 103        depends on FB
 104        default n
 105        ---help---
 106          Include the cfb_fillrect function for generic software rectangle
 107          filling. This is used by drivers that don't provide their own
 108          (accelerated) version.
 109
 110config FB_CFB_COPYAREA
 111        tristate
 112        depends on FB
 113        default n
 114        ---help---
 115          Include the cfb_copyarea function for generic software area copying.
 116          This is used by drivers that don't provide their own (accelerated)
 117          version.
 118
 119config FB_CFB_IMAGEBLIT
 120        tristate
 121        depends on FB
 122        default n
 123        ---help---
 124          Include the cfb_imageblit function for generic software image
 125          blitting. This is used by drivers that don't provide their own
 126          (accelerated) version.
 127
 128config FB_CFB_REV_PIXELS_IN_BYTE
 129        bool
 130        depends on FB
 131        default n
 132        ---help---
 133          Allow generic frame-buffer functions to work on displays with 1, 2
 134          and 4 bits per pixel depths which has opposite order of pixels in
 135          byte order to bytes in long order.
 136
 137config FB_SYS_FILLRECT
 138        tristate
 139        depends on FB
 140        default n
 141        ---help---
 142          Include the sys_fillrect function for generic software rectangle
 143          filling. This is used by drivers that don't provide their own
 144          (accelerated) version and the framebuffer is in system RAM.
 145
 146config FB_SYS_COPYAREA
 147        tristate
 148        depends on FB
 149        default n
 150        ---help---
 151          Include the sys_copyarea function for generic software area copying.
 152          This is used by drivers that don't provide their own (accelerated)
 153          version and the framebuffer is in system RAM.
 154
 155config FB_SYS_IMAGEBLIT
 156        tristate
 157        depends on FB
 158        default n
 159        ---help---
 160          Include the sys_imageblit function for generic software image
 161          blitting. This is used by drivers that don't provide their own
 162          (accelerated) version and the framebuffer is in system RAM.
 163
 164menuconfig FB_FOREIGN_ENDIAN
 165        bool "Framebuffer foreign endianness support"
 166        depends on FB
 167        ---help---
 168          This menu will let you enable support for the framebuffers with
 169          non-native endianness (e.g. Little-Endian framebuffer on a
 170          Big-Endian machine). Most probably you don't have such hardware,
 171          so it's safe to say "n" here.
 172
 173choice
 174        prompt "Choice endianness support"
 175        depends on FB_FOREIGN_ENDIAN
 176
 177config FB_BOTH_ENDIAN
 178        bool "Support for Big- and Little-Endian framebuffers"
 179
 180config FB_BIG_ENDIAN
 181        bool "Support for Big-Endian framebuffers only"
 182
 183config FB_LITTLE_ENDIAN
 184        bool "Support for Little-Endian framebuffers only"
 185
 186endchoice
 187
 188config FB_SYS_FOPS
 189       tristate
 190       depends on FB
 191       default n
 192
 193config FB_WMT_GE_ROPS
 194        tristate
 195        depends on FB
 196        default n
 197        ---help---
 198          Include functions for accelerated rectangle filling and area
 199          copying using WonderMedia Graphics Engine operations.
 200
 201config FB_DEFERRED_IO
 202        bool
 203        depends on FB
 204
 205config FB_HECUBA
 206        tristate
 207        depends on FB
 208        depends on FB_DEFERRED_IO
 209
 210config FB_SVGALIB
 211        tristate
 212        depends on FB
 213        default n
 214        ---help---
 215          Common utility functions useful to fbdev drivers of VGA-based
 216          cards.
 217
 218config FB_MACMODES
 219       tristate
 220       depends on FB
 221       default n
 222
 223config FB_BACKLIGHT
 224        bool
 225        depends on FB
 226        select BACKLIGHT_LCD_SUPPORT
 227        select BACKLIGHT_CLASS_DEVICE
 228        default n
 229
 230config FB_MODE_HELPERS
 231        bool "Enable Video Mode Handling Helpers"
 232        depends on FB
 233        default n
 234        ---help---
 235          This enables functions for handling video modes using the
 236          Generalized Timing Formula and the EDID parser. A few drivers rely
 237          on this feature such as the radeonfb, rivafb, and the i810fb. If
 238          your driver does not take advantage of this feature, choosing Y will
 239          just increase the kernel size by about 5K.
 240
 241config FB_TILEBLITTING
 242       bool "Enable Tile Blitting Support"
 243       depends on FB
 244       default n
 245       ---help---
 246         This enables tile blitting.  Tile blitting is a drawing technique
 247         where the screen is divided into rectangular sections (tiles), whereas
 248         the standard blitting divides the screen into pixels. Because the
 249         default drawing element is a tile, drawing functions will be passed
 250         parameters in terms of number of tiles instead of number of pixels.
 251         For example, to draw a single character, instead of using bitmaps,
 252         an index to an array of bitmaps will be used.  To clear or move a
 253         rectangular section of a screen, the rectangle will be described in
 254         terms of number of tiles in the x- and y-axis.
 255
 256         This is particularly important to one driver, matroxfb.  If
 257         unsure, say N.
 258
 259comment "Frame buffer hardware drivers"
 260        depends on FB
 261
 262config FB_GRVGA
 263        tristate "Aeroflex Gaisler framebuffer support"
 264        depends on FB && SPARC
 265        select FB_CFB_FILLRECT
 266        select FB_CFB_COPYAREA
 267        select FB_CFB_IMAGEBLIT
 268        ---help---
 269        This enables support for the SVGACTRL framebuffer in the GRLIB IP library from Aeroflex Gaisler.
 270
 271config FB_CIRRUS
 272        tristate "Cirrus Logic support"
 273        depends on FB && (ZORRO || PCI)
 274        select FB_CFB_FILLRECT
 275        select FB_CFB_COPYAREA
 276        select FB_CFB_IMAGEBLIT
 277        ---help---
 278          This enables support for Cirrus Logic GD542x/543x based boards on
 279          Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
 280
 281          If you have a PCI-based system, this enables support for these
 282          chips: GD-543x, GD-544x, GD-5480.
 283
 284          Please read the file <file:Documentation/fb/cirrusfb.txt>.
 285
 286          Say N unless you have such a graphics board or plan to get one
 287          before you next recompile the kernel.
 288
 289config FB_PM2
 290        tristate "Permedia2 support"
 291        depends on FB && ((AMIGA && BROKEN) || PCI)
 292        select FB_CFB_FILLRECT
 293        select FB_CFB_COPYAREA
 294        select FB_CFB_IMAGEBLIT
 295        help
 296          This is the frame buffer device driver for cards based on
 297          the 3D Labs Permedia, Permedia 2 and Permedia 2V chips.
 298          The driver was tested on the following cards:
 299                Diamond FireGL 1000 PRO AGP
 300                ELSA Gloria Synergy PCI
 301                Appian Jeronimo PRO (both heads) PCI
 302                3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI
 303                Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
 304                ASK Graphic Blaster Exxtreme AGP
 305
 306          To compile this driver as a module, choose M here: the
 307          module will be called pm2fb.
 308
 309config FB_PM2_FIFO_DISCONNECT
 310        bool "enable FIFO disconnect feature"
 311        depends on FB_PM2 && PCI
 312        help
 313          Support the Permedia2 FIFO disconnect feature.
 314
 315config FB_ARMCLCD
 316        tristate "ARM PrimeCell PL110 support"
 317        depends on FB && ARM && ARM_AMBA
 318        select FB_CFB_FILLRECT
 319        select FB_CFB_COPYAREA
 320        select FB_CFB_IMAGEBLIT
 321        help
 322          This framebuffer device driver is for the ARM PrimeCell PL110
 323          Colour LCD controller.  ARM PrimeCells provide the building
 324          blocks for System on a Chip devices.
 325
 326          If you want to compile this as a module (=code which can be
 327          inserted into and removed from the running kernel), say M
 328          here and read <file:Documentation/kbuild/modules.txt>.  The module
 329          will be called amba-clcd.
 330
 331config FB_ACORN
 332        bool "Acorn VIDC support"
 333        depends on (FB = y) && ARM && ARCH_ACORN
 334        select FB_CFB_FILLRECT
 335        select FB_CFB_COPYAREA
 336        select FB_CFB_IMAGEBLIT
 337        help
 338          This is the frame buffer device driver for the Acorn VIDC graphics
 339          hardware found in Acorn RISC PCs and other ARM-based machines.  If
 340          unsure, say N.
 341
 342config FB_CLPS711X
 343        bool "CLPS711X LCD support"
 344        depends on (FB = y) && ARM && ARCH_CLPS711X
 345        select FB_CFB_FILLRECT
 346        select FB_CFB_COPYAREA
 347        select FB_CFB_IMAGEBLIT
 348        help
 349          Say Y to enable the Framebuffer driver for the CLPS7111 and
 350          EP7212 processors.
 351
 352config FB_SA1100
 353        bool "SA-1100 LCD support"
 354        depends on (FB = y) && ARM && ARCH_SA1100
 355        select FB_CFB_FILLRECT
 356        select FB_CFB_COPYAREA
 357        select FB_CFB_IMAGEBLIT
 358        help
 359          This is a framebuffer device for the SA-1100 LCD Controller.
 360          See <http://www.linux-fbdev.org/> for information on framebuffer
 361          devices.
 362
 363          If you plan to use the LCD display with your SA-1100 system, say
 364          Y here.
 365
 366config FB_IMX
 367        tristate "Freescale i.MX LCD support"
 368        depends on FB && IMX_HAVE_PLATFORM_IMX_FB
 369        select FB_CFB_FILLRECT
 370        select FB_CFB_COPYAREA
 371        select FB_CFB_IMAGEBLIT
 372
 373config FB_CYBER2000
 374        tristate "CyberPro 2000/2010/5000 support"
 375        depends on FB && PCI && (BROKEN || !SPARC64)
 376        select FB_CFB_FILLRECT
 377        select FB_CFB_COPYAREA
 378        select FB_CFB_IMAGEBLIT
 379        help
 380          This enables support for the Integraphics CyberPro 20x0 and 5000
 381          VGA chips used in the Rebel.com Netwinder and other machines.
 382          Say Y if you have a NetWinder or a graphics card containing this
 383          device, otherwise say N.
 384
 385config FB_CYBER2000_DDC
 386        bool "DDC for CyberPro support"
 387        depends on FB_CYBER2000
 388        select FB_DDC
 389        default y
 390        help
 391          Say Y here if you want DDC support for your CyberPro graphics
 392          card. This is only I2C bus support, driver does not use EDID.
 393
 394config FB_CYBER2000_I2C
 395        bool "CyberPro 2000/2010/5000 I2C support"
 396        depends on FB_CYBER2000 && I2C && ARCH_NETWINDER
 397        select I2C_ALGOBIT
 398        help
 399          Enable support for the I2C video decoder interface on the
 400          Integraphics CyberPro 20x0 and 5000 VGA chips.  This is used
 401          on the Netwinder machines for the SAA7111 video capture.
 402
 403config FB_APOLLO
 404        bool
 405        depends on (FB = y) && APOLLO
 406        default y
 407        select FB_CFB_FILLRECT
 408        select FB_CFB_IMAGEBLIT
 409
 410config FB_Q40
 411        bool
 412        depends on (FB = y) && Q40
 413        default y
 414        select FB_CFB_FILLRECT
 415        select FB_CFB_COPYAREA
 416        select FB_CFB_IMAGEBLIT
 417
 418config FB_AMIGA
 419        tristate "Amiga native chipset support"
 420        depends on FB && AMIGA
 421        help
 422          This is the frame buffer device driver for the builtin graphics
 423          chipset found in Amigas.
 424
 425          To compile this driver as a module, choose M here: the
 426          module will be called amifb.
 427
 428config FB_AMIGA_OCS
 429        bool "Amiga OCS chipset support"
 430        depends on FB_AMIGA
 431        help
 432          This enables support for the original Agnus and Denise video chips,
 433          found in the Amiga 1000 and most A500's and A2000's. If you intend
 434          to run Linux on any of these systems, say Y; otherwise say N.
 435
 436config FB_AMIGA_ECS
 437        bool "Amiga ECS chipset support"
 438        depends on FB_AMIGA
 439        help
 440          This enables support for the Enhanced Chip Set, found in later
 441          A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If
 442          you intend to run Linux on any of these systems, say Y; otherwise
 443          say N.
 444
 445config FB_AMIGA_AGA
 446        bool "Amiga AGA chipset support"
 447        depends on FB_AMIGA
 448        help
 449          This enables support for the Advanced Graphics Architecture (also
 450          known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T
 451          and CD32. If you intend to run Linux on any of these systems, say Y;
 452          otherwise say N.
 453
 454config FB_FM2
 455        bool "Amiga FrameMaster II/Rainbow II support"
 456        depends on (FB = y) && ZORRO
 457        select FB_CFB_FILLRECT
 458        select FB_CFB_COPYAREA
 459        select FB_CFB_IMAGEBLIT
 460        help
 461          This is the frame buffer device driver for the Amiga FrameMaster
 462          card from BSC (exhibited 1992 but not shipped as a CBM product).
 463
 464config FB_ARC
 465        tristate "Arc Monochrome LCD board support"
 466        depends on FB && X86
 467        select FB_SYS_FILLRECT
 468        select FB_SYS_COPYAREA
 469        select FB_SYS_IMAGEBLIT
 470        select FB_SYS_FOPS
 471        help
 472          This enables support for the Arc Monochrome LCD board. The board
 473          is based on the KS-108 lcd controller and is typically a matrix
 474          of 2*n chips. This driver was tested with a 128x64 panel. This
 475          driver supports it for use with x86 SBCs through a 16 bit GPIO
 476          interface (8 bit data, 8 bit control). If you anticipate using
 477          this driver, say Y or M; otherwise say N. You must specify the
 478          GPIO IO address to be used for setting control and data.
 479
 480config FB_ATARI
 481        bool "Atari native chipset support"
 482        depends on (FB = y) && ATARI
 483        select FB_CFB_FILLRECT
 484        select FB_CFB_COPYAREA
 485        select FB_CFB_IMAGEBLIT
 486        help
 487          This is the frame buffer device driver for the builtin graphics
 488          chipset found in Ataris.
 489
 490config FB_OF
 491        bool "Open Firmware frame buffer device support"
 492        depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI)
 493        select FB_CFB_FILLRECT
 494        select FB_CFB_COPYAREA
 495        select FB_CFB_IMAGEBLIT
 496        select FB_MACMODES
 497        help
 498          Say Y if you want support with Open Firmware for your graphics
 499          board.
 500
 501config FB_CONTROL
 502        bool "Apple \"control\" display support"
 503        depends on (FB = y) && PPC_PMAC && PPC32
 504        select FB_CFB_FILLRECT
 505        select FB_CFB_COPYAREA
 506        select FB_CFB_IMAGEBLIT
 507        select FB_MACMODES
 508        help
 509          This driver supports a frame buffer for the graphics adapter in the
 510          Power Macintosh 7300 and others.
 511
 512config FB_PLATINUM
 513        bool "Apple \"platinum\" display support"
 514        depends on (FB = y) && PPC_PMAC && PPC32
 515        select FB_CFB_FILLRECT
 516        select FB_CFB_COPYAREA
 517        select FB_CFB_IMAGEBLIT
 518        select FB_MACMODES
 519        help
 520          This driver supports a frame buffer for the "platinum" graphics
 521          adapter in some Power Macintoshes.
 522
 523config FB_VALKYRIE
 524        bool "Apple \"valkyrie\" display support"
 525        depends on (FB = y) && (MAC || (PPC_PMAC && PPC32))
 526        select FB_CFB_FILLRECT
 527        select FB_CFB_COPYAREA
 528        select FB_CFB_IMAGEBLIT
 529        select FB_MACMODES
 530        help
 531          This driver supports a frame buffer for the "valkyrie" graphics
 532          adapter in some Power Macintoshes.
 533
 534config FB_CT65550
 535        bool "Chips 65550 display support"
 536        depends on (FB = y) && PPC32 && PCI
 537        select FB_CFB_FILLRECT
 538        select FB_CFB_COPYAREA
 539        select FB_CFB_IMAGEBLIT
 540        help
 541          This is the frame buffer device driver for the Chips & Technologies
 542          65550 graphics chip in PowerBooks.
 543
 544config FB_ASILIANT
 545        bool "Asiliant (Chips) 69000 display support"
 546        depends on (FB = y) && PCI
 547        select FB_CFB_FILLRECT
 548        select FB_CFB_COPYAREA
 549        select FB_CFB_IMAGEBLIT
 550        help
 551          This is the frame buffer device driver for the Asiliant 69030 chipset
 552
 553config FB_IMSTT
 554        bool "IMS Twin Turbo display support"
 555        depends on (FB = y) && PCI
 556        select FB_CFB_IMAGEBLIT
 557        select FB_MACMODES if PPC
 558        help
 559          The IMS Twin Turbo is a PCI-based frame buffer card bundled with
 560          many Macintosh and compatible computers.
 561
 562config FB_VGA16
 563        tristate "VGA 16-color graphics support"
 564        depends on FB && (X86 || PPC)
 565        select FB_CFB_FILLRECT
 566        select FB_CFB_COPYAREA
 567        select FB_CFB_IMAGEBLIT
 568        select VGASTATE
 569        select FONT_8x16 if FRAMEBUFFER_CONSOLE
 570        help
 571          This is the frame buffer device driver for VGA 16 color graphic
 572          cards. Say Y if you have such a card.
 573
 574          To compile this driver as a module, choose M here: the
 575          module will be called vga16fb.
 576
 577config FB_BF54X_LQ043
 578        tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)"
 579        depends on FB && (BF54x) && !BF542
 580        select FB_CFB_FILLRECT
 581        select FB_CFB_COPYAREA
 582        select FB_CFB_IMAGEBLIT
 583        help
 584         This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
 585
 586config FB_BFIN_T350MCQB
 587        tristate "Varitronix COG-T350MCQB TFT LCD display (BF527 EZKIT)"
 588        depends on FB && BLACKFIN
 589        select BFIN_GPTIMERS
 590        select FB_CFB_FILLRECT
 591        select FB_CFB_COPYAREA
 592        select FB_CFB_IMAGEBLIT
 593        help
 594         This is the framebuffer device driver for a Varitronix VL-PS-COG-T350MCQB-01 display TFT LCD
 595         This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
 596         It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
 597
 598config FB_BFIN_LQ035Q1
 599        tristate "SHARP LQ035Q1DH02 TFT LCD"
 600        depends on FB && BLACKFIN && SPI
 601        select FB_CFB_FILLRECT
 602        select FB_CFB_COPYAREA
 603        select FB_CFB_IMAGEBLIT
 604        select BFIN_GPTIMERS
 605        help
 606          This is the framebuffer device driver for a SHARP LQ035Q1DH02 TFT display found on
 607          the Blackfin Landscape LCD EZ-Extender Card.
 608          This display is a QVGA 320x240 18-bit RGB display interfaced by an 16-bit wide PPI
 609          It uses PPI[0..15] PPI_FS1, PPI_FS2 and PPI_CLK.
 610
 611          To compile this driver as a module, choose M here: the
 612          module will be called bfin-lq035q1-fb.
 613
 614config FB_BF537_LQ035
 615        tristate "SHARP LQ035 TFT LCD (BF537 STAMP)"
 616        depends on FB && (BF534 || BF536 || BF537) && I2C_BLACKFIN_TWI
 617        select FB_CFB_FILLRECT
 618        select FB_CFB_COPYAREA
 619        select FB_CFB_IMAGEBLIT
 620        select BFIN_GPTIMERS
 621        help
 622          This is the framebuffer device for a SHARP LQ035Q7DB03 TFT LCD
 623          attached to a BF537.
 624
 625          To compile this driver as a module, choose M here: the
 626          module will be called bf537-lq035.
 627
 628config FB_BFIN_7393
 629        tristate "Blackfin ADV7393 Video encoder"
 630        depends on FB && BLACKFIN
 631        select I2C
 632        select FB_CFB_FILLRECT
 633        select FB_CFB_COPYAREA
 634        select FB_CFB_IMAGEBLIT
 635        help
 636          This is the framebuffer device for a ADV7393 video encoder
 637          attached to a Blackfin on the PPI port.
 638          If your Blackfin board has a ADV7393 select Y.
 639
 640          To compile this driver as a module, choose M here: the
 641          module will be called bfin_adv7393fb.
 642
 643choice
 644        prompt  "Video mode support"
 645        depends on FB_BFIN_7393
 646        default NTSC
 647
 648config NTSC
 649        bool 'NTSC 720x480'
 650
 651config PAL
 652        bool 'PAL 720x576'
 653
 654config NTSC_640x480
 655        bool 'NTSC 640x480 (Experimental)'
 656
 657config PAL_640x480
 658        bool 'PAL 640x480 (Experimental)'
 659
 660config NTSC_YCBCR
 661        bool 'NTSC 720x480 YCbCR input'
 662
 663config PAL_YCBCR
 664        bool 'PAL 720x576 YCbCR input'
 665
 666endchoice
 667
 668choice
 669        prompt  "Size of ADV7393 frame buffer memory Single/Double Size"
 670        depends on (FB_BFIN_7393)
 671        default ADV7393_1XMEM
 672
 673config ADV7393_1XMEM
 674        bool 'Single'
 675
 676config ADV7393_2XMEM
 677        bool 'Double'
 678endchoice
 679
 680config FB_STI
 681        tristate "HP STI frame buffer device support"
 682        depends on FB && PARISC
 683        select FB_CFB_FILLRECT
 684        select FB_CFB_COPYAREA
 685        select FB_CFB_IMAGEBLIT
 686        select STI_CONSOLE
 687        select VT
 688        default y
 689        ---help---
 690          STI refers to the HP "Standard Text Interface" which is a set of
 691          BIOS routines contained in a ROM chip in HP PA-RISC based machines.
 692          Enabling this option will implement the linux framebuffer device
 693          using calls to the STI BIOS routines for initialisation.
 694        
 695          If you enable this option, you will get a planar framebuffer device
 696          /dev/fb which will work on the most common HP graphic cards of the
 697          NGLE family, including the artist chips (in the 7xx and Bxxx series),
 698          HCRX, HCRX24, CRX, CRX24 and VisEG series.
 699
 700          It is safe to enable this option, so you should probably say "Y".
 701
 702config FB_MAC
 703        bool "Generic Macintosh display support"
 704        depends on (FB = y) && MAC
 705        select FB_CFB_FILLRECT
 706        select FB_CFB_COPYAREA
 707        select FB_CFB_IMAGEBLIT
 708        select FB_MACMODES
 709
 710config FB_HP300
 711        bool
 712        depends on (FB = y) && DIO
 713        select FB_CFB_IMAGEBLIT
 714        default y
 715
 716config FB_TGA
 717        tristate "TGA/SFB+ framebuffer support"
 718        depends on FB && (ALPHA || TC)
 719        select FB_CFB_FILLRECT
 720        select FB_CFB_COPYAREA
 721        select FB_CFB_IMAGEBLIT
 722        select BITREVERSE
 723        ---help---
 724          This is the frame buffer device driver for generic TGA and SFB+
 725          graphic cards.  These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
 726          also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
 727          TURBOchannel cards, also known as PMAGD-A, -B and -C.
 728
 729          Due to hardware limitations ZLX-E2 and E3 cards are not supported
 730          for DECstation 5000/200 systems.  Additionally due to firmware
 731          limitations these cards may cause troubles with booting DECstation
 732          5000/240 and /260 systems, but are fully supported under Linux if
 733          you manage to get it going. ;-)
 734
 735          Say Y if you have one of those.
 736
 737config FB_UVESA
 738        tristate "Userspace VESA VGA graphics support"
 739        depends on FB && CONNECTOR
 740        select FB_CFB_FILLRECT
 741        select FB_CFB_COPYAREA
 742        select FB_CFB_IMAGEBLIT
 743        select FB_MODE_HELPERS
 744        help
 745          This is the frame buffer driver for generic VBE 2.0 compliant
 746          graphic cards. It can also take advantage of VBE 3.0 features,
 747          such as refresh rate adjustment.
 748
 749          This driver generally provides more features than vesafb but
 750          requires a userspace helper application called 'v86d'. See
 751          <file:Documentation/fb/uvesafb.txt> for more information.
 752
 753          If unsure, say N.
 754
 755config FB_VESA
 756        bool "VESA VGA graphics support"
 757        depends on (FB = y) && X86
 758        select FB_CFB_FILLRECT
 759        select FB_CFB_COPYAREA
 760        select FB_CFB_IMAGEBLIT
 761        select FB_BOOT_VESA_SUPPORT
 762        help
 763          This is the frame buffer device driver for generic VESA 2.0
 764          compliant graphic cards. The older VESA 1.2 cards are not supported.
 765          You will get a boot time penguin logo at no additional cost. Please
 766          read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
 767
 768config FB_EFI
 769        bool "EFI-based Framebuffer Support"
 770        depends on (FB = y) && X86 && EFI
 771        select FB_CFB_FILLRECT
 772        select FB_CFB_COPYAREA
 773        select FB_CFB_IMAGEBLIT
 774        help
 775          This is the EFI frame buffer device driver. If the firmware on
 776          your platform is EFI 1.10 or UEFI 2.0, select Y to add support for
 777          using the EFI framebuffer as your console.
 778
 779config FB_N411
 780       tristate "N411 Apollo/Hecuba devkit support"
 781       depends on FB && X86 && MMU
 782       select FB_SYS_FILLRECT
 783       select FB_SYS_COPYAREA
 784       select FB_SYS_IMAGEBLIT
 785       select FB_SYS_FOPS
 786       select FB_DEFERRED_IO
 787       select FB_HECUBA
 788       help
 789         This enables support for the Apollo display controller in its
 790         Hecuba form using the n411 devkit.
 791
 792config FB_HGA
 793        tristate "Hercules mono graphics support"
 794        depends on FB && X86
 795        help
 796          Say Y here if you have a Hercules mono graphics card.
 797
 798          To compile this driver as a module, choose M here: the
 799          module will be called hgafb.
 800
 801          As this card technology is at least 25 years old,
 802          most people will answer N here.
 803
 804config FB_SGIVW
 805        tristate "SGI Visual Workstation framebuffer support"
 806        depends on FB && X86_VISWS
 807        select FB_CFB_FILLRECT
 808        select FB_CFB_COPYAREA
 809        select FB_CFB_IMAGEBLIT
 810        help
 811          SGI Visual Workstation support for framebuffer graphics.
 812
 813config FB_GBE
 814        bool "SGI Graphics Backend frame buffer support"
 815        depends on (FB = y) && (SGI_IP32 || X86_VISWS)
 816        select FB_CFB_FILLRECT
 817        select FB_CFB_COPYAREA
 818        select FB_CFB_IMAGEBLIT
 819        help
 820          This is the frame buffer device driver for SGI Graphics Backend.
 821          This chip is used in SGI O2 and Visual Workstation 320/540.
 822
 823config FB_GBE_MEM
 824        int "Video memory size in MB"
 825        depends on FB_GBE
 826        default 4
 827        help
 828          This is the amount of memory reserved for the framebuffer,
 829          which can be any value between 1MB and 8MB.
 830
 831config FB_SBUS
 832        bool "SBUS and UPA framebuffers"
 833        depends on (FB = y) && SPARC
 834        help
 835          Say Y if you want support for SBUS or UPA based frame buffer device.
 836
 837config FB_BW2
 838        bool "BWtwo support"
 839        depends on (FB = y) && (SPARC && FB_SBUS)
 840        select FB_CFB_FILLRECT
 841        select FB_CFB_COPYAREA
 842        select FB_CFB_IMAGEBLIT
 843        help
 844          This is the frame buffer device driver for the BWtwo frame buffer.
 845
 846config FB_CG3
 847        bool "CGthree support"
 848        depends on (FB = y) && (SPARC && FB_SBUS)
 849        select FB_CFB_FILLRECT
 850        select FB_CFB_COPYAREA
 851        select FB_CFB_IMAGEBLIT
 852        help
 853          This is the frame buffer device driver for the CGthree frame buffer.
 854
 855config FB_CG6
 856        bool "CGsix (GX,TurboGX) support"
 857        depends on (FB = y) && (SPARC && FB_SBUS)
 858        select FB_CFB_COPYAREA
 859        select FB_CFB_IMAGEBLIT
 860        help
 861          This is the frame buffer device driver for the CGsix (GX, TurboGX)
 862          frame buffer.
 863
 864config FB_FFB
 865        bool "Creator/Creator3D/Elite3D support"
 866        depends on FB_SBUS && SPARC64
 867        select FB_CFB_COPYAREA
 868        select FB_CFB_IMAGEBLIT
 869        help
 870          This is the frame buffer device driver for the Creator, Creator3D,
 871          and Elite3D graphics boards.
 872
 873config FB_TCX
 874        bool "TCX (SS4/SS5 only) support"
 875        depends on FB_SBUS
 876        select FB_CFB_FILLRECT
 877        select FB_CFB_COPYAREA
 878        select FB_CFB_IMAGEBLIT
 879        help
 880          This is the frame buffer device driver for the TCX 24/8bit frame
 881          buffer.
 882
 883config FB_CG14
 884        bool "CGfourteen (SX) support"
 885        depends on FB_SBUS
 886        select FB_CFB_FILLRECT
 887        select FB_CFB_COPYAREA
 888        select FB_CFB_IMAGEBLIT
 889        help
 890          This is the frame buffer device driver for the CGfourteen frame
 891          buffer on Desktop SPARCsystems with the SX graphics option.
 892
 893config FB_P9100
 894        bool "P9100 (Sparcbook 3 only) support"
 895        depends on FB_SBUS
 896        select FB_CFB_FILLRECT
 897        select FB_CFB_COPYAREA
 898        select FB_CFB_IMAGEBLIT
 899        help
 900          This is the frame buffer device driver for the P9100 card
 901          supported on Sparcbook 3 machines.
 902
 903config FB_LEO
 904        bool "Leo (ZX) support"
 905        depends on FB_SBUS
 906        select FB_CFB_FILLRECT
 907        select FB_CFB_COPYAREA
 908        select FB_CFB_IMAGEBLIT
 909        help
 910          This is the frame buffer device driver for the SBUS-based Sun ZX
 911          (leo) frame buffer cards.
 912
 913config FB_IGA
 914        bool "IGA 168x display support"
 915        depends on (FB = y) && SPARC32
 916        select FB_CFB_FILLRECT
 917        select FB_CFB_COPYAREA
 918        select FB_CFB_IMAGEBLIT
 919        help
 920          This is the framebuffer device for the INTERGRAPHICS 1680 and
 921          successor frame buffer cards.
 922
 923config FB_XVR500
 924        bool "Sun XVR-500 3DLABS Wildcat support"
 925        depends on (FB = y) && PCI && SPARC64
 926        select FB_CFB_FILLRECT
 927        select FB_CFB_COPYAREA
 928        select FB_CFB_IMAGEBLIT
 929        help
 930          This is the framebuffer device for the Sun XVR-500 and similar
 931          graphics cards based upon the 3DLABS Wildcat chipset.  The driver
 932          only works on sparc64 systems where the system firmware has
 933          mostly initialized the card already.  It is treated as a
 934          completely dumb framebuffer device.
 935
 936config FB_XVR2500
 937        bool "Sun XVR-2500 3DLABS Wildcat support"
 938        depends on (FB = y) && PCI && SPARC64
 939        select FB_CFB_FILLRECT
 940        select FB_CFB_COPYAREA
 941        select FB_CFB_IMAGEBLIT
 942        help
 943          This is the framebuffer device for the Sun XVR-2500 and similar
 944          graphics cards based upon the 3DLABS Wildcat chipset.  The driver
 945          only works on sparc64 systems where the system firmware has
 946          mostly initialized the card already.  It is treated as a
 947          completely dumb framebuffer device.
 948
 949config FB_XVR1000
 950        bool "Sun XVR-1000 support"
 951        depends on (FB = y) && SPARC64
 952        select FB_CFB_FILLRECT
 953        select FB_CFB_COPYAREA
 954        select FB_CFB_IMAGEBLIT
 955        help
 956          This is the framebuffer device for the Sun XVR-1000 and similar
 957          graphics cards.  The driver only works on sparc64 systems where
 958          the system firmware has mostly initialized the card already.  It
 959          is treated as a completely dumb framebuffer device.
 960
 961config FB_PVR2
 962        tristate "NEC PowerVR 2 display support"
 963        depends on FB && SH_DREAMCAST
 964        select FB_CFB_FILLRECT
 965        select FB_CFB_COPYAREA
 966        select FB_CFB_IMAGEBLIT
 967        ---help---
 968          Say Y here if you have a PowerVR 2 card in your box.  If you plan to
 969          run linux on your Dreamcast, you will have to say Y here.
 970          This driver may or may not work on other PowerVR 2 cards, but is
 971          totally untested.  Use at your own risk.  If unsure, say N.
 972
 973          To compile this driver as a module, choose M here: the
 974          module will be called pvr2fb.
 975
 976          You can pass several parameters to the driver at boot time or at
 977          module load time.  The parameters look like "video=pvr2:XXX", where
 978          the meaning of XXX can be found at the end of the main source file
 979          (<file:drivers/video/pvr2fb.c>). Please see the file
 980          <file:Documentation/fb/pvr2fb.txt>.
 981
 982config FB_EPSON1355
 983        bool "Epson 1355 framebuffer support"
 984        depends on (FB = y) && ARCH_CEIVA
 985        select FB_CFB_FILLRECT
 986        select FB_CFB_COPYAREA
 987        select FB_CFB_IMAGEBLIT
 988        help
 989          Build in support for the SED1355 Epson Research Embedded RAMDAC
 990          LCD/CRT Controller (since redesignated as the S1D13505) as a
 991          framebuffer.  Product specs at
 992          <http://vdc.epson.com/>.
 993
 994config FB_S1D13XXX
 995        tristate "Epson S1D13XXX framebuffer support"
 996        depends on FB
 997        select FB_CFB_FILLRECT
 998        select FB_CFB_COPYAREA
 999        select FB_CFB_IMAGEBLIT
1000        help
1001          Support for S1D13XXX framebuffer device family (currently only
1002          working with S1D13806). Product specs at
1003          <http://vdc.epson.com/>
1004
1005config FB_ATMEL
1006        tristate "AT91/AT32 LCD Controller support"
1007        depends on FB && HAVE_FB_ATMEL
1008        select FB_CFB_FILLRECT
1009        select FB_CFB_COPYAREA
1010        select FB_CFB_IMAGEBLIT
1011        help
1012          This enables support for the AT91/AT32 LCD Controller.
1013
1014config FB_INTSRAM
1015        bool "Frame Buffer in internal SRAM"
1016        depends on FB_ATMEL && ARCH_AT91SAM9261
1017        help
1018          Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
1019          to let frame buffer in external SDRAM.
1020
1021config FB_ATMEL_STN
1022        bool "Use a STN display with AT91/AT32 LCD Controller"
1023        depends on FB_ATMEL && (MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK)
1024        default n
1025        help
1026          Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
1027          Controller. Say N if you want to connect a TFT.
1028
1029          If unsure, say N.
1030
1031config FB_NVIDIA
1032        tristate "nVidia Framebuffer Support"
1033        depends on FB && PCI
1034        select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
1035        select FB_MODE_HELPERS
1036        select FB_CFB_FILLRECT
1037        select FB_CFB_COPYAREA
1038        select FB_CFB_IMAGEBLIT
1039        select BITREVERSE
1040        select VGASTATE
1041        help
1042          This driver supports graphics boards with the nVidia chips, TNT
1043          and newer. For very old chipsets, such as the RIVA128, then use
1044          the rivafb.
1045          Say Y if you have such a graphics board.
1046
1047          To compile this driver as a module, choose M here: the
1048          module will be called nvidiafb.
1049
1050config FB_NVIDIA_I2C
1051       bool "Enable DDC Support"
1052       depends on FB_NVIDIA
1053       select FB_DDC
1054       help
1055          This enables I2C support for nVidia Chipsets.  This is used
1056          only for getting EDID information from the attached display
1057          allowing for robust video mode handling and switching.
1058
1059          Because fbdev-2.6 requires that drivers must be able to
1060          independently validate video mode parameters, you should say Y
1061          here.
1062
1063config FB_NVIDIA_DEBUG
1064        bool "Lots of debug output"
1065        depends on FB_NVIDIA
1066        default n
1067        help
1068          Say Y here if you want the nVidia driver to output all sorts
1069          of debugging information to provide to the maintainer when
1070          something goes wrong.
1071
1072config FB_NVIDIA_BACKLIGHT
1073        bool "Support for backlight control"
1074        depends on FB_NVIDIA
1075        default y
1076        help
1077          Say Y here if you want to control the backlight of your display.
1078
1079config FB_RIVA
1080        tristate "nVidia Riva support"
1081        depends on FB && PCI
1082        select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
1083        select FB_MODE_HELPERS
1084        select FB_CFB_FILLRECT
1085        select FB_CFB_COPYAREA
1086        select FB_CFB_IMAGEBLIT
1087        select BITREVERSE
1088        select VGASTATE
1089        help
1090          This driver supports graphics boards with the nVidia Riva/Geforce
1091          chips.
1092          Say Y if you have such a graphics board.
1093
1094          To compile this driver as a module, choose M here: the
1095          module will be called rivafb.
1096
1097config FB_RIVA_I2C
1098       bool "Enable DDC Support"
1099       depends on FB_RIVA
1100       select FB_DDC
1101       help
1102          This enables I2C support for nVidia Chipsets.  This is used
1103          only for getting EDID information from the attached display
1104          allowing for robust video mode handling and switching.
1105
1106          Because fbdev-2.6 requires that drivers must be able to
1107          independently validate video mode parameters, you should say Y
1108          here.
1109
1110config FB_RIVA_DEBUG
1111        bool "Lots of debug output"
1112        depends on FB_RIVA
1113        default n
1114        help
1115          Say Y here if you want the Riva driver to output all sorts
1116          of debugging information to provide to the maintainer when
1117          something goes wrong.
1118
1119config FB_RIVA_BACKLIGHT
1120        bool "Support for backlight control"
1121        depends on FB_RIVA
1122        default y
1123        help
1124          Say Y here if you want to control the backlight of your display.
1125
1126config FB_I740
1127        tristate "Intel740 support (EXPERIMENTAL)"
1128        depends on EXPERIMENTAL && FB && PCI
1129        select FB_MODE_HELPERS
1130        select FB_CFB_FILLRECT
1131        select FB_CFB_COPYAREA
1132        select FB_CFB_IMAGEBLIT
1133        select VGASTATE
1134        select FB_DDC
1135        help
1136          This driver supports graphics cards based on Intel740 chip.
1137
1138config FB_I810
1139        tristate "Intel 810/815 support (EXPERIMENTAL)"
1140        depends on EXPERIMENTAL && FB && PCI && X86_32 && AGP_INTEL
1141        select FB_MODE_HELPERS
1142        select FB_CFB_FILLRECT
1143        select FB_CFB_COPYAREA
1144        select FB_CFB_IMAGEBLIT
1145        select VGASTATE
1146        help
1147          This driver supports the on-board graphics built in to the Intel 810 
1148          and 815 chipsets.  Say Y if you have and plan to use such a board.
1149
1150          To compile this driver as a module, choose M here: the
1151          module will be called i810fb.
1152
1153          For more information, please read 
1154          <file:Documentation/fb/intel810.txt>
1155
1156config FB_I810_GTF
1157        bool "use VESA Generalized Timing Formula"
1158        depends on FB_I810
1159        help
1160          If you say Y, then the VESA standard, Generalized Timing Formula 
1161          or GTF, will be used to calculate the required video timing values
1162          per video mode.  Since the GTF allows nondiscrete timings 
1163          (nondiscrete being a range of values as opposed to discrete being a
1164          set of values), you'll be able to use any combination of horizontal 
1165          and vertical resolutions, and vertical refresh rates without having
1166          to specify your own timing parameters.  This is especially useful
1167          to maximize the performance of an aging display, or if you just 
1168          have a display with nonstandard dimensions. A VESA compliant 
1169          monitor is recommended, but can still work with non-compliant ones.
1170          If you need or want this, then select this option. The timings may 
1171          not be compliant with Intel's recommended values. Use at your own 
1172          risk.
1173
1174          If you say N, the driver will revert to discrete video timings 
1175          using a set recommended by Intel in their documentation.
1176  
1177          If unsure, say N.
1178
1179config FB_I810_I2C
1180        bool "Enable DDC Support"
1181        depends on FB_I810 && FB_I810_GTF
1182        select FB_DDC
1183        help
1184
1185config FB_LE80578
1186        tristate "Intel LE80578 (Vermilion) support"
1187        depends on FB && PCI && X86
1188        select FB_MODE_HELPERS
1189        select FB_CFB_FILLRECT
1190        select FB_CFB_COPYAREA
1191        select FB_CFB_IMAGEBLIT
1192        help
1193          This driver supports the LE80578 (Vermilion Range) chipset
1194
1195config FB_CARILLO_RANCH
1196        tristate "Intel Carillo Ranch support"
1197        depends on FB_LE80578 && FB && PCI && X86
1198        help
1199          This driver supports the LE80578 (Carillo Ranch) board
1200
1201config FB_INTEL
1202        tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support (EXPERIMENTAL)"
1203        depends on EXPERIMENTAL && FB && PCI && X86 && AGP_INTEL && EXPERT
1204        select FB_MODE_HELPERS
1205        select FB_CFB_FILLRECT
1206        select FB_CFB_COPYAREA
1207        select FB_CFB_IMAGEBLIT
1208        select FB_BOOT_VESA_SUPPORT if FB_INTEL = y
1209        depends on !DRM_I915
1210        help
1211          This driver supports the on-board graphics built in to the Intel
1212          830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
1213          Say Y if you have and plan to use such a board.
1214
1215          To make FB_INTELFB=Y work you need to say AGP_INTEL=y too.
1216
1217          To compile this driver as a module, choose M here: the
1218          module will be called intelfb.
1219
1220          For more information, please read <file:Documentation/fb/intelfb.txt>
1221
1222config FB_INTEL_DEBUG
1223        bool "Intel driver Debug Messages"
1224        depends on FB_INTEL
1225        ---help---
1226          Say Y here if you want the Intel driver to output all sorts
1227          of debugging information to provide to the maintainer when
1228          something goes wrong.
1229
1230config FB_INTEL_I2C
1231        bool "DDC/I2C for Intel framebuffer support"
1232        depends on FB_INTEL
1233        select FB_DDC
1234        default y
1235        help
1236          Say Y here if you want DDC/I2C support for your on-board Intel graphics.
1237
1238config FB_MATROX
1239        tristate "Matrox acceleration"
1240        depends on FB && PCI
1241        select FB_CFB_FILLRECT
1242        select FB_CFB_COPYAREA
1243        select FB_CFB_IMAGEBLIT
1244        select FB_TILEBLITTING
1245        select FB_MACMODES if PPC_PMAC
1246        ---help---
1247          Say Y here if you have a Matrox Millennium, Matrox Millennium II,
1248          Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
1249          Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
1250          Matrox G400, G450 or G550 card in your box.
1251
1252          To compile this driver as a module, choose M here: the
1253          module will be called matroxfb.
1254
1255          You can pass several parameters to the driver at boot time or at
1256          module load time. The parameters look like "video=matroxfb:XXX", and
1257          are described in <file:Documentation/fb/matroxfb.txt>.
1258
1259config FB_MATROX_MILLENIUM
1260        bool "Millennium I/II support"
1261        depends on FB_MATROX
1262        help
1263          Say Y here if you have a Matrox Millennium or Matrox Millennium II
1264          video card. If you select "Advanced lowlevel driver options" below,
1265          you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp
1266          packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can
1267          also use font widths different from 8.
1268
1269config FB_MATROX_MYSTIQUE
1270        bool "Mystique support"
1271        depends on FB_MATROX
1272        help
1273          Say Y here if you have a Matrox Mystique or Matrox Mystique 220
1274          video card. If you select "Advanced lowlevel driver options" below,
1275          you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp
1276          packed pixel and 32 bpp packed pixel. You can also use font widths
1277          different from 8.
1278
1279config FB_MATROX_G
1280        bool "G100/G200/G400/G450/G550 support"
1281        depends on FB_MATROX
1282        ---help---
1283          Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
1284          video card. If you select "Advanced lowlevel driver options", you
1285          should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
1286          pixel and 32 bpp packed pixel. You can also use font widths
1287          different from 8.
1288
1289          If you need support for G400 secondary head, you must say Y to
1290          "Matrox I2C support" and "G400 second head support" right below.
1291          G450/G550 secondary head and digital output are supported without
1292          additional modules.
1293
1294          The driver starts in monitor mode. You must use the matroxset tool 
1295          (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to 
1296          swap primary and secondary head outputs, or to change output mode.  
1297          Secondary head driver always start in 640x480 resolution and you 
1298          must use fbset to change it.
1299
1300          Do not forget that second head supports only 16 and 32 bpp
1301          packed pixels, so it is a good idea to compile them into the kernel
1302          too. You can use only some font widths, as the driver uses generic
1303          painting procedures (the secondary head does not use acceleration
1304          engine).
1305
1306          G450/G550 hardware can display TV picture only from secondary CRTC,
1307          and it performs no scaling, so picture must have 525 or 625 lines.
1308
1309config FB_MATROX_I2C
1310        tristate "Matrox I2C support"
1311        depends on FB_MATROX
1312        select FB_DDC
1313        ---help---
1314          This drivers creates I2C buses which are needed for accessing the
1315          DDC (I2C) bus present on all Matroxes, an I2C bus which
1316          interconnects Matrox optional devices, like MGA-TVO on G200 and
1317          G400, and the secondary head DDC bus, present on G400 only.
1318
1319          You can say Y or M here if you want to experiment with monitor
1320          detection code. You must say Y or M here if you want to use either
1321          second head of G400 or MGA-TVO on G200 or G400.
1322
1323          If you compile it as module, it will create a module named
1324          i2c-matroxfb.
1325
1326config FB_MATROX_MAVEN
1327        tristate "G400 second head support"
1328        depends on FB_MATROX_G && FB_MATROX_I2C
1329        ---help---
1330          WARNING !!! This support does not work with G450 !!!
1331
1332          Say Y or M here if you want to use a secondary head (meaning two
1333          monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
1334          head is not compatible with accelerated XFree 3.3.x SVGA servers -
1335          secondary head output is blanked while you are in X. With XFree
1336          3.9.17 preview you can use both heads if you use SVGA over fbdev or
1337          the fbdev driver on first head and the fbdev driver on second head.
1338
1339          If you compile it as module, two modules are created,
1340          matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for
1341          both G200 and G400, matroxfb_crtc2 is needed only by G400. You must
1342          also load i2c-matroxfb to get it to run.
1343
1344          The driver starts in monitor mode and you must use the matroxset
1345          tool (available at
1346          <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
1347          PAL or NTSC or to swap primary and secondary head outputs.
1348          Secondary head driver also always start in 640x480 resolution, you
1349          must use fbset to change it.
1350
1351          Also do not forget that second head supports only 16 and 32 bpp
1352          packed pixels, so it is a good idea to compile them into the kernel
1353          too.  You can use only some font widths, as the driver uses generic
1354          painting procedures (the secondary head does not use acceleration
1355          engine).
1356
1357config FB_RADEON
1358        tristate "ATI Radeon display support"
1359        depends on FB && PCI
1360        select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
1361        select FB_MODE_HELPERS
1362        select FB_CFB_FILLRECT
1363        select FB_CFB_COPYAREA
1364        select FB_CFB_IMAGEBLIT
1365        select FB_MACMODES if PPC_OF
1366        help
1367          Choose this option if you want to use an ATI Radeon graphics card as
1368          a framebuffer device.  There are both PCI and AGP versions.  You
1369          don't need to choose this to run the Radeon in plain VGA mode.
1370
1371          There is a product page at
1372          http://products.amd.com/en-us/GraphicCardResult.aspx
1373
1374config FB_RADEON_I2C
1375        bool "DDC/I2C for ATI Radeon support"
1376        depends on FB_RADEON
1377        select FB_DDC
1378        default y
1379        help
1380          Say Y here if you want DDC/I2C support for your Radeon board. 
1381
1382config FB_RADEON_BACKLIGHT
1383        bool "Support for backlight control"
1384        depends on FB_RADEON
1385        default y
1386        help
1387          Say Y here if you want to control the backlight of your display.
1388
1389config FB_RADEON_DEBUG
1390        bool "Lots of debug output from Radeon driver"
1391        depends on FB_RADEON
1392        default n
1393        help
1394          Say Y here if you want the Radeon driver to output all sorts
1395          of debugging information to provide to the maintainer when
1396          something goes wrong.
1397
1398config FB_ATY128
1399        tristate "ATI Rage128 display support"
1400        depends on FB && PCI
1401        select FB_CFB_FILLRECT
1402        select FB_CFB_COPYAREA
1403        select FB_CFB_IMAGEBLIT
1404        select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
1405        select FB_MACMODES if PPC_PMAC
1406        help
1407          This driver supports graphics boards with the ATI Rage128 chips.
1408          Say Y if you have such a graphics board and read
1409          <file:Documentation/fb/aty128fb.txt>.
1410
1411          To compile this driver as a module, choose M here: the
1412          module will be called aty128fb.
1413
1414config FB_ATY128_BACKLIGHT
1415        bool "Support for backlight control"
1416        depends on FB_ATY128
1417        default y
1418        help
1419          Say Y here if you want to control the backlight of your display.
1420
1421config FB_ATY
1422        tristate "ATI Mach64 display support" if PCI || ATARI
1423        depends on FB && !SPARC32
1424        select FB_CFB_FILLRECT
1425        select FB_CFB_COPYAREA
1426        select FB_CFB_IMAGEBLIT
1427        select FB_BACKLIGHT if FB_ATY_BACKLIGHT
1428        select FB_MACMODES if PPC
1429        help
1430          This driver supports graphics boards with the ATI Mach64 chips.
1431          Say Y if you have such a graphics board.
1432
1433          To compile this driver as a module, choose M here: the
1434          module will be called atyfb.
1435
1436config FB_ATY_CT
1437        bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
1438        depends on PCI && FB_ATY
1439        default y if SPARC64 && PCI
1440        help
1441          Say Y here to support use of ATI's 64-bit Rage boards (or other
1442          boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
1443          framebuffer device.  The ATI product support page for these boards
1444          is at <http://support.ati.com/products/pc/mach64/mach64.html>.
1445
1446config FB_ATY_GENERIC_LCD
1447        bool "Mach64 generic LCD support (EXPERIMENTAL)"
1448        depends on FB_ATY_CT
1449        help
1450          Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
1451          Rage XC, or Rage XL chipset.
1452
1453config FB_ATY_GX
1454        bool "Mach64 GX support" if PCI
1455        depends on FB_ATY
1456        default y if ATARI
1457        help
1458          Say Y here to support use of the ATI Mach64 Graphics Expression
1459          board (or other boards based on the Mach64 GX chipset) as a
1460          framebuffer device.  The ATI product support page for these boards
1461          is at
1462          <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
1463
1464config FB_ATY_BACKLIGHT
1465        bool "Support for backlight control"
1466        depends on FB_ATY
1467        default y
1468        help
1469          Say Y here if you want to control the backlight of your display.
1470
1471config FB_S3
1472        tristate "S3 Trio/Virge support"
1473        depends on FB && PCI
1474        select FB_CFB_FILLRECT
1475        select FB_CFB_COPYAREA
1476        select FB_CFB_IMAGEBLIT
1477        select FB_TILEBLITTING
1478        select FB_SVGALIB
1479        select VGASTATE
1480        select FONT_8x16 if FRAMEBUFFER_CONSOLE
1481        ---help---
1482          Driver for graphics boards with S3 Trio / S3 Virge chip.
1483
1484config FB_S3_DDC
1485        bool "DDC for S3 support"
1486        depends on FB_S3
1487        select FB_DDC
1488        default y
1489        help
1490          Say Y here if you want DDC support for your S3 graphics card.
1491
1492config FB_SAVAGE
1493        tristate "S3 Savage support"
1494        depends on FB && PCI && EXPERIMENTAL
1495        select FB_MODE_HELPERS
1496        select FB_CFB_FILLRECT
1497        select FB_CFB_COPYAREA
1498        select FB_CFB_IMAGEBLIT
1499        select VGASTATE
1500        help
1501          This driver supports notebooks and computers with S3 Savage PCI/AGP
1502          chips.
1503
1504          Say Y if you have such a graphics card.
1505
1506          To compile this driver as a module, choose M here; the module
1507          will be called savagefb.
1508
1509config FB_SAVAGE_I2C
1510       bool "Enable DDC2 Support"
1511       depends on FB_SAVAGE
1512       select FB_DDC
1513       help
1514          This enables I2C support for S3 Savage Chipsets.  This is used
1515          only for getting EDID information from the attached display
1516          allowing for robust video mode handling and switching.
1517
1518          Because fbdev-2.6 requires that drivers must be able to
1519          independently validate video mode parameters, you should say Y
1520          here.
1521
1522config FB_SAVAGE_ACCEL
1523       bool "Enable Console Acceleration"
1524       depends on FB_SAVAGE
1525       default n
1526       help
1527          This option will compile in console acceleration support. If
1528          the resulting framebuffer console has bothersome glitches, then
1529          choose N here.
1530
1531config FB_SIS
1532        tristate "SiS/XGI display support"
1533        depends on FB && PCI
1534        select FB_CFB_FILLRECT
1535        select FB_CFB_COPYAREA
1536        select FB_CFB_IMAGEBLIT
1537        select FB_BOOT_VESA_SUPPORT if FB_SIS = y
1538        help
1539          This is the frame buffer device driver for the SiS 300, 315, 330
1540          and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
1541          Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
1542
1543          To compile this driver as a module, choose M here; the module
1544          will be called sisfb.
1545
1546config FB_SIS_300
1547        bool "SiS 300 series support"
1548        depends on FB_SIS
1549        help
1550          Say Y here to support use of the SiS 300/305, 540, 630 and 730.
1551
1552config FB_SIS_315
1553        bool "SiS 315/330/340 series and XGI support"
1554        depends on FB_SIS
1555        help
1556          Say Y here to support use of the SiS 315, 330 and 340 series
1557          (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
1558          as XGI V3XT, V5, V8 and Z7.
1559
1560config FB_VIA
1561       tristate "VIA UniChrome (Pro) and Chrome9 display support"
1562       depends on FB && PCI && X86
1563       select FB_CFB_FILLRECT
1564       select FB_CFB_COPYAREA
1565       select FB_CFB_IMAGEBLIT
1566       select I2C_ALGOBIT
1567       select I2C
1568       select GPIOLIB
1569       help
1570          This is the frame buffer device driver for Graphics chips of VIA
1571          UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/
1572          CN700/VN800,CX700/VX700,P4M890) and Chrome9 Family (K8M890,CN896
1573          /P4M900,VX800)
1574          Say Y if you have a VIA UniChrome graphics board.
1575
1576          To compile this driver as a module, choose M here: the
1577          module will be called viafb.
1578
1579if FB_VIA
1580
1581config FB_VIA_DIRECT_PROCFS
1582        bool "direct hardware access via procfs (DEPRECATED)(DANGEROUS)"
1583        depends on FB_VIA
1584        default n
1585        help
1586          Allow direct hardware access to some output registers via procfs.
1587          This is dangerous but may provide the only chance to get the
1588          correct output device configuration.
1589          Its use is strongly discouraged.
1590
1591config FB_VIA_X_COMPATIBILITY
1592        bool "X server compatibility"
1593        depends on FB_VIA
1594        default n
1595        help
1596          This option reduces the functionality (power saving, ...) of the
1597          framebuffer to avoid negative impact on the OpenChrome X server.
1598          If you use any X server other than fbdev you should enable this
1599          otherwise it should be safe to disable it and allow using all
1600          features.
1601
1602endif
1603
1604config FB_NEOMAGIC
1605        tristate "NeoMagic display support"
1606        depends on FB && PCI
1607        select FB_MODE_HELPERS
1608        select FB_CFB_FILLRECT
1609        select FB_CFB_COPYAREA
1610        select FB_CFB_IMAGEBLIT
1611        select VGASTATE
1612        help
1613          This driver supports notebooks with NeoMagic PCI chips.
1614          Say Y if you have such a graphics card. 
1615
1616          To compile this driver as a module, choose M here: the
1617          module will be called neofb.
1618
1619config FB_KYRO
1620        tristate "IMG Kyro support"
1621        depends on FB && PCI
1622        select FB_CFB_FILLRECT
1623        select FB_CFB_COPYAREA
1624        select FB_CFB_IMAGEBLIT
1625        help
1626          Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
1627          graphics board.
1628
1629          To compile this driver as a module, choose M here: the
1630          module will be called kyrofb.
1631
1632config FB_3DFX
1633        tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support"
1634        depends on FB && PCI
1635        select FB_CFB_IMAGEBLIT
1636        select FB_CFB_FILLRECT
1637        select FB_CFB_COPYAREA
1638        select FB_MODE_HELPERS
1639        help
1640          This driver supports graphics boards with the 3Dfx Banshee,
1641          Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
1642          such a graphics board.
1643
1644          To compile this driver as a module, choose M here: the
1645          module will be called tdfxfb.
1646
1647config FB_3DFX_ACCEL
1648        bool "3Dfx Acceleration functions (EXPERIMENTAL)"
1649        depends on FB_3DFX && EXPERIMENTAL
1650        ---help---
1651        This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
1652        device driver with acceleration functions.
1653
1654config FB_3DFX_I2C
1655        bool "Enable DDC/I2C support"
1656        depends on FB_3DFX && EXPERIMENTAL
1657        select FB_DDC
1658        default y
1659        help
1660          Say Y here if you want DDC/I2C support for your 3dfx Voodoo3.
1661
1662config FB_VOODOO1
1663        tristate "3Dfx Voodoo Graphics (sst1) support"
1664        depends on FB && PCI
1665        select FB_CFB_FILLRECT
1666        select FB_CFB_COPYAREA
1667        select FB_CFB_IMAGEBLIT
1668        ---help---
1669          Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or 
1670          Voodoo2 (cvg) based graphics card.
1671
1672          To compile this driver as a module, choose M here: the
1673          module will be called sstfb.
1674
1675          WARNING: Do not use any application that uses the 3D engine
1676          (namely glide) while using this driver.
1677          Please read the <file:Documentation/fb/sstfb.txt> for supported
1678          options and other important info  support.
1679
1680config FB_VT8623
1681        tristate "VIA VT8623 support"
1682        depends on FB && PCI
1683        select FB_CFB_FILLRECT
1684        select FB_CFB_COPYAREA
1685        select FB_CFB_IMAGEBLIT
1686        select FB_TILEBLITTING
1687        select FB_SVGALIB
1688        select VGASTATE
1689        select FONT_8x16 if FRAMEBUFFER_CONSOLE
1690        ---help---
1691          Driver for CastleRock integrated graphics core in the
1692          VIA VT8623 [Apollo CLE266] chipset.
1693
1694config FB_TRIDENT
1695        tristate "Trident/CyberXXX/CyberBlade support"
1696        depends on FB && PCI
1697        select FB_CFB_FILLRECT
1698        select FB_CFB_COPYAREA
1699        select FB_CFB_IMAGEBLIT
1700        ---help---
1701          This is the frame buffer device driver for Trident PCI/AGP chipsets.
1702          Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D
1703          and Blade XP.
1704          There are also integrated versions of these chips called CyberXXXX,
1705          CyberImage or CyberBlade. These chips are mostly found in laptops
1706          but also on some motherboards including early VIA EPIA motherboards.
1707          For more information, read <file:Documentation/fb/tridentfb.txt>
1708
1709          Say Y if you have such a graphics board.
1710
1711          To compile this driver as a module, choose M here: the
1712          module will be called tridentfb.
1713
1714config FB_ARK
1715        tristate "ARK 2000PV support"
1716        depends on FB && PCI
1717        select FB_CFB_FILLRECT
1718        select FB_CFB_COPYAREA
1719        select FB_CFB_IMAGEBLIT
1720        select FB_TILEBLITTING
1721        select FB_SVGALIB
1722        select VGASTATE
1723        select FONT_8x16 if FRAMEBUFFER_CONSOLE
1724        ---help---
1725          Driver for PCI graphics boards with ARK 2000PV chip
1726          and ICS 5342 RAMDAC.
1727
1728config FB_PM3
1729        tristate "Permedia3 support (EXPERIMENTAL)"
1730        depends on FB && PCI && EXPERIMENTAL
1731        select FB_CFB_FILLRECT
1732        select FB_CFB_COPYAREA
1733        select FB_CFB_IMAGEBLIT
1734        help
1735          This is the frame buffer device driver for the 3DLabs Permedia3
1736          chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
1737          similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
1738          and maybe other boards.
1739
1740config FB_CARMINE
1741        tristate "Fujitsu carmine frame buffer support"
1742        depends on FB && PCI
1743        select FB_CFB_FILLRECT
1744        select FB_CFB_COPYAREA
1745        select FB_CFB_IMAGEBLIT
1746        help
1747          This is the frame buffer device driver for the Fujitsu Carmine chip.
1748          The driver provides two independent frame buffer devices.
1749
1750choice
1751        depends on FB_CARMINE
1752        prompt "DRAM timing"
1753        default FB_CARMINE_DRAM_EVAL
1754
1755config FB_CARMINE_DRAM_EVAL
1756        bool "Eval board timings"
1757        help
1758          Use timings which work on the eval card.
1759
1760config CARMINE_DRAM_CUSTOM
1761        bool "Custom board timings"
1762        help
1763          Use custom board timings.
1764endchoice
1765
1766config FB_AU1100
1767        bool "Au1100 LCD Driver"
1768        depends on (FB = y) && MIPS_ALCHEMY
1769        select FB_CFB_FILLRECT
1770        select FB_CFB_COPYAREA
1771        select FB_CFB_IMAGEBLIT
1772        help
1773          This is the framebuffer driver for the AMD Au1100 SOC.  It can drive
1774          various panels and CRTs by passing in kernel cmd line option
1775          au1100fb:panel=<name>.
1776
1777config FB_AU1200
1778        bool "Au1200/Au1300 LCD Driver"
1779        depends on (FB = y) && MIPS_ALCHEMY
1780        select FB_SYS_FILLRECT
1781        select FB_SYS_COPYAREA
1782        select FB_SYS_IMAGEBLIT
1783        select FB_SYS_FOPS
1784        help
1785          This is the framebuffer driver for the Au1200/Au1300 SOCs.
1786          It can drive various panels and CRTs by passing in kernel cmd line
1787          option au1200fb:panel=<name>.
1788
1789config FB_VT8500
1790        bool "VT8500 LCD Driver"
1791        depends on (FB = y) && ARM && ARCH_VT8500 && VTWM_VERSION_VT8500
1792        select FB_WMT_GE_ROPS
1793        select FB_SYS_IMAGEBLIT
1794        help
1795          This is the framebuffer driver for VIA VT8500 integrated LCD
1796          controller.
1797
1798config FB_WM8505
1799        bool "WM8505 frame buffer support"
1800        depends on (FB = y) && ARM && ARCH_VT8500 && VTWM_VERSION_WM8505
1801        select FB_WMT_GE_ROPS
1802        select FB_SYS_IMAGEBLIT
1803        help
1804          This is the framebuffer driver for WonderMedia WM8505
1805          integrated LCD controller.
1806
1807source "drivers/video/geode/Kconfig"
1808
1809config FB_HIT
1810        tristate "HD64461 Frame Buffer support"
1811        depends on FB && HD64461
1812        select FB_CFB_FILLRECT
1813        select FB_CFB_COPYAREA
1814        select FB_CFB_IMAGEBLIT
1815        help
1816          This is the frame buffer device driver for the Hitachi HD64461 LCD
1817          frame buffer card.
1818
1819config FB_PMAG_AA
1820        bool "PMAG-AA TURBOchannel framebuffer support"
1821        depends on (FB = y) && TC
1822        select FB_CFB_FILLRECT
1823        select FB_CFB_COPYAREA
1824        select FB_CFB_IMAGEBLIT
1825        help
1826          Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1827          used mainly in the MIPS-based DECstation series.
1828
1829config FB_PMAG_BA
1830        tristate "PMAG-BA TURBOchannel framebuffer support"
1831        depends on FB && TC
1832        select FB_CFB_FILLRECT
1833        select FB_CFB_COPYAREA
1834        select FB_CFB_IMAGEBLIT
1835        help
1836          Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1837          used mainly in the MIPS-based DECstation series.
1838
1839config FB_PMAGB_B
1840        tristate "PMAGB-B TURBOchannel framebuffer support"
1841        depends on FB && TC
1842        select FB_CFB_FILLRECT
1843        select FB_CFB_COPYAREA
1844        select FB_CFB_IMAGEBLIT
1845        help
1846          Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1847          in the MIPS-based DECstation series. The card is currently only
1848          supported in 1280x1024x8 mode.
1849
1850config FB_MAXINE
1851        bool "Maxine (Personal DECstation) onboard framebuffer support"
1852        depends on (FB = y) && MACH_DECSTATION
1853        select FB_CFB_FILLRECT
1854        select FB_CFB_COPYAREA
1855        select FB_CFB_IMAGEBLIT
1856        help
1857          Support for the onboard framebuffer (1024x768x8) in the Personal
1858          DECstation series (Personal DECstation 5000/20, /25, /33, /50,
1859          Codename "Maxine").
1860
1861config FB_G364
1862        bool "G364 frame buffer support"
1863        depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
1864        select FB_CFB_FILLRECT
1865        select FB_CFB_COPYAREA
1866        select FB_CFB_IMAGEBLIT
1867        help
1868          The G364 driver is the framebuffer used in MIPS Magnum 4000 and
1869          Olivetti M700-10 systems.
1870
1871config FB_68328
1872        bool "Motorola 68328 native frame buffer support"
1873        depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328)
1874        select FB_CFB_FILLRECT
1875        select FB_CFB_COPYAREA
1876        select FB_CFB_IMAGEBLIT
1877        help
1878          Say Y here if you want to support the built-in frame buffer of
1879          the Motorola 68328 CPU family.
1880
1881config FB_PXA168
1882        tristate "PXA168/910 LCD framebuffer support"
1883        depends on FB && (CPU_PXA168 || CPU_PXA910)
1884        select FB_CFB_FILLRECT
1885        select FB_CFB_COPYAREA
1886        select FB_CFB_IMAGEBLIT
1887        ---help---
1888          Frame buffer driver for the built-in LCD controller in the Marvell
1889          MMP processor.
1890
1891config FB_PXA
1892        tristate "PXA LCD framebuffer support"
1893        depends on FB && ARCH_PXA
1894        select FB_CFB_FILLRECT
1895        select FB_CFB_COPYAREA
1896        select FB_CFB_IMAGEBLIT
1897        ---help---
1898          Frame buffer driver for the built-in LCD controller in the Intel
1899          PXA2x0 processor.
1900
1901          This driver is also available as a module ( = code which can be
1902          inserted and removed from the running kernel whenever you want). The
1903          module will be called pxafb. If you want to compile it as a module,
1904          say M here and read <file:Documentation/kbuild/modules.txt>.
1905
1906          If unsure, say N.
1907
1908config FB_PXA_OVERLAY
1909        bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer"
1910        default n
1911        depends on FB_PXA && (PXA27x || PXA3xx)
1912
1913config FB_PXA_SMARTPANEL
1914        bool "PXA Smartpanel LCD support"
1915        default n
1916        depends on FB_PXA
1917
1918config FB_PXA_PARAMETERS
1919        bool "PXA LCD command line parameters"
1920        default n
1921        depends on FB_PXA
1922        ---help---
1923          Enable the use of kernel command line or module parameters
1924          to configure the physical properties of the LCD panel when
1925          using the PXA LCD driver.
1926
1927          This option allows you to override the panel parameters
1928          supplied by the platform in order to support multiple
1929          different models of flatpanel. If you will only be using a
1930          single model of flatpanel then you can safely leave this
1931          option disabled.
1932
1933          <file:Documentation/fb/pxafb.txt> describes the available parameters.
1934
1935config PXA3XX_GCU
1936        tristate "PXA3xx 2D graphics accelerator driver"
1937        depends on FB_PXA
1938        help
1939          Kernelspace driver for the 2D graphics controller unit (GCU)
1940          found on PXA3xx processors. There is a counterpart driver in the
1941          DirectFB suite, see http://www.directfb.org/
1942
1943          If you compile this as a module, it will be called pxa3xx_gcu.
1944
1945config FB_MBX
1946        tristate "2700G LCD framebuffer support"
1947        depends on FB && ARCH_PXA
1948        select FB_CFB_FILLRECT
1949        select FB_CFB_COPYAREA
1950        select FB_CFB_IMAGEBLIT
1951        ---help---
1952          Framebuffer driver for the Intel 2700G (Marathon) Graphics
1953          Accelerator
1954
1955config FB_MBX_DEBUG
1956       bool "Enable debugging info via debugfs"
1957       depends on FB_MBX && DEBUG_FS
1958       default n
1959       ---help---
1960         Enable this if you want debugging information using the debug
1961         filesystem (debugfs)
1962
1963         If unsure, say N.
1964
1965config FB_FSL_DIU
1966        tristate "Freescale DIU framebuffer support"
1967        depends on FB && FSL_SOC
1968        select FB_MODE_HELPERS
1969        select FB_CFB_FILLRECT
1970        select FB_CFB_COPYAREA
1971        select FB_CFB_IMAGEBLIT
1972        select PPC_LIB_RHEAP
1973        ---help---
1974          Framebuffer driver for the Freescale SoC DIU
1975
1976config FB_W100
1977        tristate "W100 frame buffer support"
1978        depends on FB && ARCH_PXA
1979        select FB_CFB_FILLRECT
1980        select FB_CFB_COPYAREA
1981        select FB_CFB_IMAGEBLIT
1982        ---help---
1983          Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
1984          It can also drive the w3220 chip found on iPAQ hx4700.
1985
1986          This driver is also available as a module ( = code which can be
1987          inserted and removed from the running kernel whenever you want). The
1988          module will be called w100fb. If you want to compile it as a module,
1989          say M here and read <file:Documentation/kbuild/modules.txt>.
1990
1991          If unsure, say N.
1992
1993config FB_SH_MOBILE_LCDC
1994        tristate "SuperH Mobile LCDC framebuffer support"
1995        depends on FB && (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
1996        select FB_SYS_FILLRECT
1997        select FB_SYS_COPYAREA
1998        select FB_SYS_IMAGEBLIT
1999        select FB_SYS_FOPS
2000        select FB_DEFERRED_IO
2001        select FB_BACKLIGHT
2002        select SH_MIPI_DSI if SH_LCD_MIPI_DSI
2003        ---help---
2004          Frame buffer driver for the on-chip SH-Mobile LCD controller.
2005
2006config FB_SH_MOBILE_HDMI
2007        tristate "SuperH Mobile HDMI controller support"
2008        depends on FB_SH_MOBILE_LCDC
2009        select FB_MODE_HELPERS
2010        select SOUND
2011        select SND
2012        select SND_SOC
2013        ---help---
2014          Driver for the on-chip SH-Mobile HDMI controller.
2015
2016config FB_TMIO
2017        tristate "Toshiba Mobile IO FrameBuffer support"
2018        depends on FB && MFD_CORE
2019        select FB_CFB_FILLRECT
2020        select FB_CFB_COPYAREA
2021        select FB_CFB_IMAGEBLIT
2022        ---help---
2023          Frame buffer driver for the Toshiba Mobile IO integrated as found
2024          on the Sharp SL-6000 series
2025
2026          This driver is also available as a module ( = code which can be
2027          inserted and removed from the running kernel whenever you want). The
2028          module will be called tmiofb. If you want to compile it as a module,
2029          say M here and read <file:Documentation/kbuild/modules.txt>.
2030
2031          If unsure, say N.
2032
2033config FB_TMIO_ACCELL
2034        bool "tmiofb acceleration"
2035        depends on FB_TMIO
2036        default y
2037
2038config FB_S3C
2039        tristate "Samsung S3C framebuffer support"
2040        depends on FB && (S3C_DEV_FB || S5P_DEV_FIMD0)
2041        select FB_CFB_FILLRECT
2042        select FB_CFB_COPYAREA
2043        select FB_CFB_IMAGEBLIT
2044        ---help---
2045          Frame buffer driver for the built-in FB controller in the Samsung
2046          SoC line from the S3C2443 onwards, including the S3C2416, S3C2450,
2047          and the S3C64XX series such as the S3C6400 and S3C6410.
2048
2049          These chips all have the same basic framebuffer design with the
2050          actual capabilities depending on the chip. For instance the S3C6400
2051          and S3C6410 support 4 hardware windows whereas the S3C24XX series
2052          currently only have two.
2053
2054          Currently the support is only for the S3C6400 and S3C6410 SoCs.
2055
2056config FB_S3C_DEBUG_REGWRITE
2057       bool "Debug register writes"
2058       depends on FB_S3C
2059       ---help---
2060         Show all register writes via printk(KERN_DEBUG)
2061
2062config FB_S3C2410
2063        tristate "S3C2410 LCD framebuffer support"
2064        depends on FB && ARCH_S3C24XX
2065        select FB_CFB_FILLRECT
2066        select FB_CFB_COPYAREA
2067        select FB_CFB_IMAGEBLIT
2068        ---help---
2069          Frame buffer driver for the built-in LCD controller in the Samsung
2070          S3C2410 processor.
2071
2072          This driver is also available as a module ( = code which can be
2073          inserted and removed from the running kernel whenever you want). The
2074          module will be called s3c2410fb. If you want to compile it as a module,
2075          say M here and read <file:Documentation/kbuild/modules.txt>.
2076
2077          If unsure, say N.
2078config FB_S3C2410_DEBUG
2079        bool "S3C2410 lcd debug messages"
2080        depends on FB_S3C2410
2081        help
2082          Turn on debugging messages. Note that you can set/unset at run time
2083          through sysfs
2084
2085config FB_NUC900
2086        bool "NUC900 LCD framebuffer support"
2087        depends on FB && ARCH_W90X900
2088        select FB_CFB_FILLRECT
2089        select FB_CFB_COPYAREA
2090        select FB_CFB_IMAGEBLIT
2091        ---help---
2092          Frame buffer driver for the built-in LCD controller in the Nuvoton
2093          NUC900 processor
2094
2095config GPM1040A0_320X240
2096        bool "Giantplus Technology GPM1040A0 320x240 Color TFT LCD"
2097        depends on FB_NUC900
2098
2099config FB_NUC900_DEBUG
2100        bool "NUC900 lcd debug messages"
2101        depends on FB_NUC900
2102        help
2103          Turn on debugging messages. Note that you can set/unset at run time
2104          through sysfs
2105
2106config FB_SM501
2107        tristate "Silicon Motion SM501 framebuffer support"
2108        depends on FB && MFD_SM501
2109        select FB_CFB_FILLRECT
2110        select FB_CFB_COPYAREA
2111        select FB_CFB_IMAGEBLIT
2112        ---help---
2113          Frame buffer driver for the CRT and LCD controllers in the Silicon
2114          Motion SM501.
2115
2116          This driver is also available as a module ( = code which can be
2117          inserted and removed from the running kernel whenever you want). The
2118          module will be called sm501fb. If you want to compile it as a module,
2119          say M here and read <file:Documentation/kbuild/modules.txt>.
2120
2121          If unsure, say N.
2122
2123config FB_SMSCUFX
2124        tristate "SMSC UFX6000/7000 USB Framebuffer support"
2125        depends on FB && USB
2126        select FB_MODE_HELPERS
2127        select FB_SYS_FILLRECT
2128        select FB_SYS_COPYAREA
2129        select FB_SYS_IMAGEBLIT
2130        select FB_SYS_FOPS
2131        select FB_DEFERRED_IO
2132        ---help---
2133          This is a kernel framebuffer driver for SMSC UFX USB devices.
2134          Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
2135          mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
2136          (USB 3.0) devices.
2137          To compile as a module, choose M here: the module name is smscufx.
2138
2139config FB_UDL
2140        tristate "Displaylink USB Framebuffer support"
2141        depends on FB && USB
2142        select FB_MODE_HELPERS
2143        select FB_SYS_FILLRECT
2144        select FB_SYS_COPYAREA
2145        select FB_SYS_IMAGEBLIT
2146        select FB_SYS_FOPS
2147        select FB_DEFERRED_IO
2148        ---help---
2149          This is a kernel framebuffer driver for DisplayLink USB devices.
2150          Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
2151          mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
2152          To compile as a module, choose M here: the module name is udlfb.
2153
2154config FB_PNX4008_DUM
2155        tristate "Display Update Module support on Philips PNX4008 board"
2156        depends on FB && ARCH_PNX4008
2157        ---help---
2158          Say Y here to enable support for PNX4008 Display Update Module (DUM)
2159
2160config FB_PNX4008_DUM_RGB
2161        tristate "RGB Framebuffer support on Philips PNX4008 board"
2162        depends on FB_PNX4008_DUM
2163        select FB_CFB_FILLRECT
2164        select FB_CFB_COPYAREA
2165        select FB_CFB_IMAGEBLIT
2166        ---help---
2167          Say Y here to enable support for PNX4008 RGB Framebuffer
2168
2169config FB_IBM_GXT4500
2170        tristate "Framebuffer support for IBM GXT4500P adaptor"
2171        depends on FB && PPC
2172        select FB_CFB_FILLRECT
2173        select FB_CFB_COPYAREA
2174        select FB_CFB_IMAGEBLIT
2175        ---help---
2176          Say Y here to enable support for the IBM GXT4500P display
2177          adaptor, found on some IBM System P (pSeries) machines.
2178
2179config FB_PS3
2180        tristate "PS3 GPU framebuffer driver"
2181        depends on FB && PS3_PS3AV
2182        select FB_SYS_FILLRECT
2183        select FB_SYS_COPYAREA
2184        select FB_SYS_IMAGEBLIT
2185        select FB_SYS_FOPS
2186        select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
2187        ---help---
2188          Include support for the virtual frame buffer in the PS3 platform.
2189
2190config FB_PS3_DEFAULT_SIZE_M
2191        int "PS3 default frame buffer size (in MiB)"
2192        depends on FB_PS3
2193        default 9
2194        ---help---
2195          This is the default size (in MiB) of the virtual frame buffer in
2196          the PS3.
2197          The default value can be overridden on the kernel command line
2198          using the "ps3fb" option (e.g. "ps3fb=9M");
2199
2200config FB_XILINX
2201        tristate "Xilinx frame buffer support"
2202        depends on FB && (XILINX_VIRTEX || MICROBLAZE)
2203        select FB_CFB_FILLRECT
2204        select FB_CFB_COPYAREA
2205        select FB_CFB_IMAGEBLIT
2206        ---help---
2207          Include support for the Xilinx ML300/ML403 reference design
2208          framebuffer. ML300 carries a 640*480 LCD display on the board,
2209          ML403 uses a standard DB15 VGA connector.
2210
2211config FB_COBALT
2212        tristate "Cobalt server LCD frame buffer support"
2213        depends on FB && (MIPS_COBALT || MIPS_SEAD3)
2214
2215config FB_SH7760
2216        bool "SH7760/SH7763/SH7720/SH7721 LCDC support"
2217        depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763 \
2218                || CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721)
2219        select FB_CFB_FILLRECT
2220        select FB_CFB_COPYAREA
2221        select FB_CFB_IMAGEBLIT
2222        ---help---
2223          Support for the SH7760/SH7763/SH7720/SH7721 integrated
2224          (D)STN/TFT LCD Controller.
2225          Supports display resolutions up to 1024x1024 pixel, grayscale and
2226          color operation, with depths ranging from 1 bpp to 8 bpp monochrome
2227          and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
2228          panels <= 320 pixel horizontal resolution.
2229
2230config FB_DA8XX
2231        tristate "DA8xx/OMAP-L1xx Framebuffer support"
2232        depends on FB && ARCH_DAVINCI_DA8XX
2233        select FB_CFB_FILLRECT
2234        select FB_CFB_COPYAREA
2235        select FB_CFB_IMAGEBLIT
2236        select FB_CFB_REV_PIXELS_IN_BYTE
2237        ---help---
2238          This is the frame buffer device driver for the TI LCD controller
2239          found on DA8xx/OMAP-L1xx SoCs.
2240          If unsure, say N.
2241
2242config FB_VIRTUAL
2243        tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
2244        depends on FB
2245        select FB_SYS_FILLRECT
2246        select FB_SYS_COPYAREA
2247        select FB_SYS_IMAGEBLIT
2248        select FB_SYS_FOPS
2249        ---help---
2250          This is a `virtual' frame buffer device. It operates on a chunk of
2251          unswappable kernel memory instead of on the memory of a graphics
2252          board. This means you cannot see any output sent to this frame
2253          buffer device, while it does consume precious memory. The main use
2254          of this frame buffer device is testing and debugging the frame
2255          buffer subsystem. Do NOT enable it for normal systems! To protect
2256          the innocent, it has to be enabled explicitly at boot time using the
2257          kernel option `video=vfb:'.
2258
2259          To compile this driver as a module, choose M here: the
2260          module will be called vfb. In order to load it, you must use
2261          the vfb_enable=1 option.
2262
2263          If unsure, say N.
2264
2265config XEN_FBDEV_FRONTEND
2266        tristate "Xen virtual frame buffer support"
2267        depends on FB && XEN
2268        select FB_SYS_FILLRECT
2269        select FB_SYS_COPYAREA
2270        select FB_SYS_IMAGEBLIT
2271        select FB_SYS_FOPS
2272        select FB_DEFERRED_IO
2273        select INPUT_XEN_KBDDEV_FRONTEND
2274        select XEN_XENBUS_FRONTEND
2275        default y
2276        help
2277          This driver implements the front-end of the Xen virtual
2278          frame buffer driver.  It communicates with a back-end
2279          in another domain.
2280
2281config FB_METRONOME
2282        tristate "E-Ink Metronome/8track controller support"
2283        depends on FB
2284        select FB_SYS_FILLRECT
2285        select FB_SYS_COPYAREA
2286        select FB_SYS_IMAGEBLIT
2287        select FB_SYS_FOPS
2288        select FB_DEFERRED_IO
2289        help
2290          This driver implements support for the E-Ink Metronome
2291          controller. The pre-release name for this device was 8track
2292          and could also have been called by some vendors as PVI-nnnn.
2293
2294config FB_MB862XX
2295        tristate "Fujitsu MB862xx GDC support"
2296        depends on FB
2297        depends on PCI || (OF && PPC)
2298        select FB_CFB_FILLRECT
2299        select FB_CFB_COPYAREA
2300        select FB_CFB_IMAGEBLIT
2301        ---help---
2302          Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
2303
2304choice
2305        prompt "GDC variant"
2306        depends on FB_MB862XX
2307
2308config FB_MB862XX_PCI_GDC
2309        bool "Carmine/Coral-P(A) GDC"
2310        depends on PCI
2311        ---help---
2312          This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
2313          PCI graphics controller devices.
2314
2315config FB_MB862XX_LIME
2316        bool "Lime GDC"
2317        depends on OF && PPC
2318        select FB_FOREIGN_ENDIAN
2319        select FB_LITTLE_ENDIAN
2320        ---help---
2321          Framebuffer support for Fujitsu Lime GDC on host CPU bus.
2322
2323endchoice
2324
2325config FB_MB862XX_I2C
2326        bool "Support I2C bus on MB862XX GDC"
2327        depends on FB_MB862XX && I2C
2328        default y
2329        help
2330          Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
2331          driver to support accessing I2C devices on controller's I2C bus.
2332          These are usually some video decoder chips.
2333
2334config FB_EP93XX
2335        tristate "EP93XX frame buffer support"
2336        depends on FB && ARCH_EP93XX
2337        select FB_CFB_FILLRECT
2338        select FB_CFB_COPYAREA
2339        select FB_CFB_IMAGEBLIT
2340        ---help---
2341          Framebuffer driver for the Cirrus Logic EP93XX series of processors.
2342          This driver is also available as a module. The module will be called
2343          ep93xx-fb.
2344
2345config FB_PRE_INIT_FB
2346        bool "Don't reinitialize, use bootloader's GDC/Display configuration"
2347        depends on FB && FB_MB862XX_LIME
2348        ---help---
2349          Select this option if display contents should be inherited as set by
2350          the bootloader.
2351
2352config FB_MSM
2353        tristate "MSM Framebuffer support"
2354        depends on FB && ARCH_MSM
2355        select FB_CFB_FILLRECT
2356        select FB_CFB_COPYAREA
2357        select FB_CFB_IMAGEBLIT
2358
2359config FB_MX3
2360        tristate "MX3 Framebuffer support"
2361        depends on FB && MX3_IPU
2362        select FB_CFB_FILLRECT
2363        select FB_CFB_COPYAREA
2364        select FB_CFB_IMAGEBLIT
2365        default y
2366        help
2367          This is a framebuffer device for the i.MX31 LCD Controller. So
2368          far only synchronous displays are supported. If you plan to use
2369          an LCD display with your i.MX31 system, say Y here.
2370
2371config FB_BROADSHEET
2372        tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
2373        depends on FB
2374        select FB_SYS_FILLRECT
2375        select FB_SYS_COPYAREA
2376        select FB_SYS_IMAGEBLIT
2377        select FB_SYS_FOPS
2378        select FB_DEFERRED_IO
2379        help
2380          This driver implements support for the E-Ink Broadsheet
2381          controller. The release name for this device was Epson S1D13521
2382          and could also have been called by other names when coupled with
2383          a bridge adapter.
2384
2385config FB_AUO_K190X
2386        tristate "AUO-K190X EPD controller support"
2387        depends on FB
2388        select FB_SYS_FILLRECT
2389        select FB_SYS_COPYAREA
2390        select FB_SYS_IMAGEBLIT
2391        select FB_SYS_FOPS
2392        select FB_DEFERRED_IO
2393        help
2394          Provides support for epaper controllers from the K190X series
2395          of AUO. These controllers can be used to drive epaper displays
2396          from Sipix.
2397
2398          This option enables the common support, shared by the individual
2399          controller drivers. You will also have to enable the driver
2400          for the controller type used in your device.
2401
2402config FB_AUO_K1900
2403        tristate "AUO-K1900 EPD controller support"
2404        depends on FB && FB_AUO_K190X
2405        help
2406          This driver implements support for the AUO K1900 epd-controller.
2407          This controller can drive Sipix epaper displays but can only do
2408          serial updates, reducing the number of possible frames per second.
2409
2410config FB_AUO_K1901
2411        tristate "AUO-K1901 EPD controller support"
2412        depends on FB && FB_AUO_K190X
2413        help
2414          This driver implements support for the AUO K1901 epd-controller.
2415          This controller can drive Sipix epaper displays and supports
2416          concurrent updates, making higher frames per second possible.
2417
2418config FB_JZ4740
2419        tristate "JZ4740 LCD framebuffer support"
2420        depends on FB && MACH_JZ4740
2421        select FB_SYS_FILLRECT
2422        select FB_SYS_COPYAREA
2423        select FB_SYS_IMAGEBLIT
2424        help
2425          Framebuffer support for the JZ4740 SoC.
2426
2427config FB_MXS
2428        tristate "MXS LCD framebuffer support"
2429        depends on FB && ARCH_MXS
2430        select FB_CFB_FILLRECT
2431        select FB_CFB_COPYAREA
2432        select FB_CFB_IMAGEBLIT
2433        help
2434          Framebuffer support for the MXS SoC.
2435
2436config FB_PUV3_UNIGFX
2437        tristate "PKUnity v3 Unigfx framebuffer support"
2438        depends on FB && UNICORE32 && ARCH_PUV3
2439        select FB_SYS_FILLRECT
2440        select FB_SYS_COPYAREA
2441        select FB_SYS_IMAGEBLIT
2442        select FB_SYS_FOPS
2443        help
2444          Choose this option if you want to use the Unigfx device as a
2445          framebuffer device. Without the support of PCI & AGP.
2446
2447source "drivers/video/omap/Kconfig"
2448source "drivers/video/omap2/Kconfig"
2449source "drivers/video/exynos/Kconfig"
2450source "drivers/video/backlight/Kconfig"
2451
2452if VT
2453        source "drivers/video/console/Kconfig"
2454endif
2455
2456if FB || SGI_NEWPORT_CONSOLE
2457        source "drivers/video/logo/Kconfig"
2458endif
2459
2460config FB_SH_MOBILE_MERAM
2461        tristate "SuperH Mobile MERAM read ahead support"
2462        depends on (SUPERH || ARCH_SHMOBILE)
2463        select GENERIC_ALLOCATOR
2464        ---help---
2465          Enable MERAM support for the SuperH controller.
2466
2467          This will allow for caching of the framebuffer to provide more
2468          reliable access under heavy main memory bus traffic situations.
2469          Up to 4 memory channels can be configured, allowing 4 RGB or
2470          2 YCbCr framebuffers to be configured.
2471
2472endmenu
2473
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.