linux/drivers/ide/via82cxxx.c
<<
>>
Prefs
   1/*
   2 * VIA IDE driver for Linux. Supported southbridges:
   3 *
   4 *   vt82c576, vt82c586, vt82c586a, vt82c586b, vt82c596a, vt82c596b,
   5 *   vt82c686, vt82c686a, vt82c686b, vt8231, vt8233, vt8233c, vt8233a,
   6 *   vt8235, vt8237, vt8237a
   7 *
   8 * Copyright (c) 2000-2002 Vojtech Pavlik
   9 * Copyright (c) 2007-2010 Bartlomiej Zolnierkiewicz
  10 *
  11 * Based on the work of:
  12 *      Michel Aubry
  13 *      Jeff Garzik
  14 *      Andre Hedrick
  15 *
  16 * Documentation:
  17 *      Obsolete device documentation publicly available from via.com.tw
  18 *      Current device documentation available under NDA only
  19 */
  20
  21/*
  22 * This program is free software; you can redistribute it and/or modify it
  23 * under the terms of the GNU General Public License version 2 as published by
  24 * the Free Software Foundation.
  25 */
  26
  27#include <linux/module.h>
  28#include <linux/kernel.h>
  29#include <linux/slab.h>
  30#include <linux/pci.h>
  31#include <linux/init.h>
  32#include <linux/ide.h>
  33#include <linux/dmi.h>
  34
  35#ifdef CONFIG_PPC_CHRP
  36#include <asm/processor.h>
  37#endif
  38
  39#define DRV_NAME "via82cxxx"
  40
  41#define VIA_IDE_ENABLE          0x40
  42#define VIA_IDE_CONFIG          0x41
  43#define VIA_FIFO_CONFIG         0x43
  44#define VIA_MISC_1              0x44
  45#define VIA_MISC_2              0x45
  46#define VIA_MISC_3              0x46
  47#define VIA_DRIVE_TIMING        0x48
  48#define VIA_8BIT_TIMING         0x4e
  49#define VIA_ADDRESS_SETUP       0x4c
  50#define VIA_UDMA_TIMING         0x50
  51
  52#define VIA_BAD_PREQ            0x01 /* Crashes if PREQ# till DDACK# set */
  53#define VIA_BAD_CLK66           0x02 /* 66 MHz clock doesn't work correctly */
  54#define VIA_SET_FIFO            0x04 /* Needs to have FIFO split set */
  55#define VIA_NO_UNMASK           0x08 /* Doesn't work with IRQ unmasking on */
  56#define VIA_BAD_ID              0x10 /* Has wrong vendor ID (0x1107) */
  57#define VIA_BAD_AST             0x20 /* Don't touch Address Setup Timing */
  58#define VIA_SATA_PATA           0x80 /* SATA/PATA combined configuration */
  59
  60enum {
  61        VIA_IDFLAG_SINGLE = (1 << 1), /* single channel controller */
  62};
  63
  64/*
  65 * VIA SouthBridge chips.
  66 */
  67
  68static struct via_isa_bridge {
  69        char *name;
  70        u16 id;
  71        u8 rev_min;
  72        u8 rev_max;
  73        u8 udma_mask;
  74        u8 flags;
  75} via_isa_bridges[] = {
  76        { "vx855",      PCI_DEVICE_ID_VIA_VX855,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
  77        { "vx800",      PCI_DEVICE_ID_VIA_VX800,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
  78        { "cx700",      PCI_DEVICE_ID_VIA_CX700,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA },
  79        { "vt8261",     PCI_DEVICE_ID_VIA_8261,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
  80        { "vt8237s",    PCI_DEVICE_ID_VIA_8237S,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
  81        { "vt6410",     PCI_DEVICE_ID_VIA_6410,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
  82        { "vt6415",     PCI_DEVICE_ID_VIA_6415,     0x00, 0xff, ATA_UDMA6, VIA_BAD_AST },
  83        { "vt8251",     PCI_DEVICE_ID_VIA_8251,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
  84        { "vt8237",     PCI_DEVICE_ID_VIA_8237,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
  85        { "vt8237a",    PCI_DEVICE_ID_VIA_8237A,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
  86        { "vt8235",     PCI_DEVICE_ID_VIA_8235,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
  87        { "vt8233a",    PCI_DEVICE_ID_VIA_8233A,    0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
  88        { "vt8233c",    PCI_DEVICE_ID_VIA_8233C_0,  0x00, 0x2f, ATA_UDMA5, },
  89        { "vt8233",     PCI_DEVICE_ID_VIA_8233_0,   0x00, 0x2f, ATA_UDMA5, },
  90        { "vt8231",     PCI_DEVICE_ID_VIA_8231,     0x00, 0x2f, ATA_UDMA5, },
  91        { "vt82c686b",  PCI_DEVICE_ID_VIA_82C686,   0x40, 0x4f, ATA_UDMA5, },
  92        { "vt82c686a",  PCI_DEVICE_ID_VIA_82C686,   0x10, 0x2f, ATA_UDMA4, },
  93        { "vt82c686",   PCI_DEVICE_ID_VIA_82C686,   0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 },
  94        { "vt82c596b",  PCI_DEVICE_ID_VIA_82C596,   0x10, 0x2f, ATA_UDMA4, },
  95        { "vt82c596a",  PCI_DEVICE_ID_VIA_82C596,   0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 },
  96        { "vt82c586b",  PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, ATA_UDMA2, VIA_SET_FIFO },
  97        { "vt82c586b",  PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, ATA_UDMA2, VIA_SET_FIFO | VIA_BAD_PREQ },
  98        { "vt82c586b",  PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, ATA_UDMA2, VIA_SET_FIFO },
  99        { "vt82c586a",  PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, ATA_UDMA2, VIA_SET_FIFO },
 100        { "vt82c586",   PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f,      0x00, VIA_SET_FIFO },
 101        { "vt82c576",   PCI_DEVICE_ID_VIA_82C576,   0x00, 0x2f,      0x00, VIA_SET_FIFO | VIA_NO_UNMASK },
 102        { "vt82c576",   PCI_DEVICE_ID_VIA_82C576,   0x00, 0x2f,      0x00, VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
 103        { "vtxxxx",     PCI_DEVICE_ID_VIA_ANON,     0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
 104        { NULL }
 105};
 106
 107static unsigned int via_clock;
 108static char *via_dma[] = { "16", "25", "33", "44", "66", "100", "133" };
 109
 110struct via82cxxx_dev
 111{
 112        struct via_isa_bridge *via_config;
 113        unsigned int via_80w;
 114};
 115
 116/**
 117 *      via_set_speed                   -       write timing registers
 118 *      @dev: PCI device
 119 *      @dn: device
 120 *      @timing: IDE timing data to use
 121 *
 122 *      via_set_speed writes timing values to the chipset registers
 123 */
 124
 125static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
 126{
 127        struct pci_dev *dev = to_pci_dev(hwif->dev);
 128        struct ide_host *host = pci_get_drvdata(dev);
 129        struct via82cxxx_dev *vdev = host->host_priv;
 130        u8 t;
 131
 132        if (~vdev->via_config->flags & VIA_BAD_AST) {
 133                pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t);
 134                t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
 135                pci_write_config_byte(dev, VIA_ADDRESS_SETUP, t);
 136        }
 137
 138        pci_write_config_byte(dev, VIA_8BIT_TIMING + (1 - (dn >> 1)),
 139                ((clamp_val(timing->act8b, 1, 16) - 1) << 4) | (clamp_val(timing->rec8b, 1, 16) - 1));
 140
 141        pci_write_config_byte(dev, VIA_DRIVE_TIMING + (3 - dn),
 142                ((clamp_val(timing->active, 1, 16) - 1) << 4) | (clamp_val(timing->recover, 1, 16) - 1));
 143
 144        switch (vdev->via_config->udma_mask) {
 145        case ATA_UDMA2: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 5) - 2)) : 0x03; break;
 146        case ATA_UDMA4: t = timing->udma ? (0xe8 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x0f; break;
 147        case ATA_UDMA5: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break;
 148        case ATA_UDMA6: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break;
 149        }
 150
 151        /* Set UDMA unless device is not UDMA capable */
 152        if (vdev->via_config->udma_mask) {
 153                u8 udma_etc;
 154
 155                pci_read_config_byte(dev, VIA_UDMA_TIMING + 3 - dn, &udma_etc);
 156
 157                /* clear transfer mode bit */
 158                udma_etc &= ~0x20;
 159
 160                if (timing->udma) {
 161                        /* preserve 80-wire cable detection bit */
 162                        udma_etc &= 0x10;
 163                        udma_etc |= t;
 164                }
 165
 166                pci_write_config_byte(dev, VIA_UDMA_TIMING + 3 - dn, udma_etc);
 167        }
 168}
 169
 170/**
 171 *      via_set_drive           -       configure transfer mode
 172 *      @hwif: port
 173 *      @drive: Drive to set up
 174 *
 175 *      via_set_drive() computes timing values configures the chipset to
 176 *      a desired transfer mode.  It also can be called by upper layers.
 177 */
 178
 179static void via_set_drive(ide_hwif_t *hwif, ide_drive_t *drive)
 180{
 181        ide_drive_t *peer = ide_get_pair_dev(drive);
 182        struct pci_dev *dev = to_pci_dev(hwif->dev);
 183        struct ide_host *host = pci_get_drvdata(dev);
 184        struct via82cxxx_dev *vdev = host->host_priv;
 185        struct ide_timing t, p;
 186        unsigned int T, UT;
 187        const u8 speed = drive->dma_mode;
 188
 189        T = 1000000000 / via_clock;
 190
 191        switch (vdev->via_config->udma_mask) {
 192        case ATA_UDMA2: UT = T;   break;
 193        case ATA_UDMA4: UT = T/2; break;
 194        case ATA_UDMA5: UT = T/3; break;
 195        case ATA_UDMA6: UT = T/4; break;
 196        default:        UT = T;
 197        }
 198
 199        ide_timing_compute(drive, speed, &t, T, UT);
 200
 201        if (peer) {
 202                ide_timing_compute(peer, peer->pio_mode, &p, T, UT);
 203                ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
 204        }
 205
 206        via_set_speed(hwif, drive->dn, &t);
 207}
 208
 209/**
 210 *      via_set_pio_mode        -       set host controller for PIO mode
 211 *      @hwif: port
 212 *      @drive: drive
 213 *
 214 *      A callback from the upper layers for PIO-only tuning.
 215 */
 216
 217static void via_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 218{
 219        drive->dma_mode = drive->pio_mode;
 220        via_set_drive(hwif, drive);
 221}
 222
 223static struct via_isa_bridge *via_config_find(struct pci_dev **isa)
 224{
 225        struct via_isa_bridge *via_config;
 226
 227        for (via_config = via_isa_bridges;
 228             via_config->id != PCI_DEVICE_ID_VIA_ANON; via_config++)
 229                if ((*isa = pci_get_device(PCI_VENDOR_ID_VIA +
 230                        !!(via_config->flags & VIA_BAD_ID),
 231                        via_config->id, NULL))) {
 232
 233                        if ((*isa)->revision >= via_config->rev_min &&
 234                            (*isa)->revision <= via_config->rev_max)
 235                                break;
 236                        pci_dev_put(*isa);
 237                }
 238
 239        return via_config;
 240}
 241
 242/*
 243 * Check and handle 80-wire cable presence
 244 */
 245static void via_cable_detect(struct via82cxxx_dev *vdev, u32 u)
 246{
 247        int i;
 248
 249        switch (vdev->via_config->udma_mask) {
 250                case ATA_UDMA4:
 251                        for (i = 24; i >= 0; i -= 8)
 252                                if (((u >> (i & 16)) & 8) &&
 253                                    ((u >> i) & 0x20) &&
 254                                     (((u >> i) & 7) < 2)) {
 255                                        /*
 256                                         * 2x PCI clock and
 257                                         * UDMA w/ < 3T/cycle
 258                                         */
 259                                        vdev->via_80w |= (1 << (1 - (i >> 4)));
 260                                }
 261                        break;
 262
 263                case ATA_UDMA5:
 264                        for (i = 24; i >= 0; i -= 8)
 265                                if (((u >> i) & 0x10) ||
 266                                    (((u >> i) & 0x20) &&
 267                                     (((u >> i) & 7) < 4))) {
 268                                        /* BIOS 80-wire bit or
 269                                         * UDMA w/ < 60ns/cycle
 270                                         */
 271                                        vdev->via_80w |= (1 << (1 - (i >> 4)));
 272                                }
 273                        break;
 274
 275                case ATA_UDMA6:
 276                        for (i = 24; i >= 0; i -= 8)
 277                                if (((u >> i) & 0x10) ||
 278                                    (((u >> i) & 0x20) &&
 279                                     (((u >> i) & 7) < 6))) {
 280                                        /* BIOS 80-wire bit or
 281                                         * UDMA w/ < 60ns/cycle
 282                                         */
 283                                        vdev->via_80w |= (1 << (1 - (i >> 4)));
 284                                }
 285                        break;
 286        }
 287}
 288
 289/**
 290 *      init_chipset_via82cxxx  -       initialization handler
 291 *      @dev: PCI device
 292 *
 293 *      The initialization callback. Here we determine the IDE chip type
 294 *      and initialize its drive independent registers.
 295 */
 296
 297static int init_chipset_via82cxxx(struct pci_dev *dev)
 298{
 299        struct ide_host *host = pci_get_drvdata(dev);
 300        struct via82cxxx_dev *vdev = host->host_priv;
 301        struct via_isa_bridge *via_config = vdev->via_config;
 302        u8 t, v;
 303        u32 u;
 304
 305        /*
 306         * Detect cable and configure Clk66
 307         */
 308        pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
 309
 310        via_cable_detect(vdev, u);
 311
 312        if (via_config->udma_mask == ATA_UDMA4) {
 313                /* Enable Clk66 */
 314                pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008);
 315        } else if (via_config->flags & VIA_BAD_CLK66) {
 316                /* Would cause trouble on 596a and 686 */
 317                pci_write_config_dword(dev, VIA_UDMA_TIMING, u & ~0x80008);
 318        }
 319
 320        /*
 321         * Check whether interfaces are enabled.
 322         */
 323
 324        pci_read_config_byte(dev, VIA_IDE_ENABLE, &v);
 325
 326        /*
 327         * Set up FIFO sizes and thresholds.
 328         */
 329
 330        pci_read_config_byte(dev, VIA_FIFO_CONFIG, &t);
 331
 332        /* Disable PREQ# till DDACK# */
 333        if (via_config->flags & VIA_BAD_PREQ) {
 334                /* Would crash on 586b rev 41 */
 335                t &= 0x7f;
 336        }
 337
 338        /* Fix FIFO split between channels */
 339        if (via_config->flags & VIA_SET_FIFO) {
 340                t &= (t & 0x9f);
 341                switch (v & 3) {
 342                        case 2: t |= 0x00; break;       /* 16 on primary */
 343                        case 1: t |= 0x60; break;       /* 16 on secondary */
 344                        case 3: t |= 0x20; break;       /* 8 pri 8 sec */
 345                }
 346        }
 347
 348        pci_write_config_byte(dev, VIA_FIFO_CONFIG, t);
 349
 350        return 0;
 351}
 352
 353/*
 354 *      Cable special cases
 355 */
 356
 357static const struct dmi_system_id cable_dmi_table[] = {
 358        {
 359                .ident = "Acer Ferrari 3400",
 360                .matches = {
 361                        DMI_MATCH(DMI_BOARD_VENDOR, "Acer,Inc."),
 362                        DMI_MATCH(DMI_BOARD_NAME, "Ferrari 3400"),
 363                },
 364        },
 365        { }
 366};
 367
 368static int via_cable_override(struct pci_dev *pdev)
 369{
 370        /* Systems by DMI */
 371        if (dmi_check_system(cable_dmi_table))
 372                return 1;
 373
 374        /* Arima W730-K8/Targa Visionary 811/... */
 375        if (pdev->subsystem_vendor == 0x161F &&
 376            pdev->subsystem_device == 0x2032)
 377                return 1;
 378
 379        return 0;
 380}
 381
 382static u8 via82cxxx_cable_detect(ide_hwif_t *hwif)
 383{
 384        struct pci_dev *pdev = to_pci_dev(hwif->dev);
 385        struct ide_host *host = pci_get_drvdata(pdev);
 386        struct via82cxxx_dev *vdev = host->host_priv;
 387
 388        if (via_cable_override(pdev))
 389                return ATA_CBL_PATA40_SHORT;
 390
 391        if ((vdev->via_config->flags & VIA_SATA_PATA) && hwif->channel == 0)
 392                return ATA_CBL_SATA;
 393
 394        if ((vdev->via_80w >> hwif->channel) & 1)
 395                return ATA_CBL_PATA80;
 396        else
 397                return ATA_CBL_PATA40;
 398}
 399
 400static const struct ide_port_ops via_port_ops = {
 401        .set_pio_mode           = via_set_pio_mode,
 402        .set_dma_mode           = via_set_drive,
 403        .cable_detect           = via82cxxx_cable_detect,
 404};
 405
 406static const struct ide_port_info via82cxxx_chipset __devinitdata = {
 407        .name           = DRV_NAME,
 408        .init_chipset   = init_chipset_via82cxxx,
 409        .enablebits     = { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } },
 410        .port_ops       = &via_port_ops,
 411        .host_flags     = IDE_HFLAG_PIO_NO_BLACKLIST |
 412                          IDE_HFLAG_POST_SET_MODE |
 413                          IDE_HFLAG_IO_32BIT,
 414        .pio_mask       = ATA_PIO5,
 415        .swdma_mask     = ATA_SWDMA2,
 416        .mwdma_mask     = ATA_MWDMA2,
 417};
 418
 419static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 420{
 421        struct pci_dev *isa = NULL;
 422        struct via_isa_bridge *via_config;
 423        struct via82cxxx_dev *vdev;
 424        int rc;
 425        u8 idx = id->driver_data;
 426        struct ide_port_info d;
 427
 428        d = via82cxxx_chipset;
 429
 430        /*
 431         * Find the ISA bridge and check we know what it is.
 432         */
 433        via_config = via_config_find(&isa);
 434
 435        /*
 436         * Print the boot message.
 437         */
 438        printk(KERN_INFO DRV_NAME " %s: VIA %s (rev %02x) IDE %sDMA%s\n",
 439                pci_name(dev), via_config->name, isa->revision,
 440                via_config->udma_mask ? "U" : "MW",
 441                via_dma[via_config->udma_mask ?
 442                        (fls(via_config->udma_mask) - 1) : 0]);
 443
 444        pci_dev_put(isa);
 445
 446        /*
 447         * Determine system bus clock.
 448         */
 449        via_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000;
 450
 451        switch (via_clock) {
 452        case 33000: via_clock = 33333; break;
 453        case 37000: via_clock = 37500; break;
 454        case 41000: via_clock = 41666; break;
 455        }
 456
 457        if (via_clock < 20000 || via_clock > 50000) {
 458                printk(KERN_WARNING DRV_NAME ": User given PCI clock speed "
 459                        "impossible (%d), using 33 MHz instead.\n", via_clock);
 460                via_clock = 33333;
 461        }
 462
 463        if (idx == 1)
 464                d.enablebits[1].reg = d.enablebits[0].reg = 0;
 465        else
 466                d.host_flags |= IDE_HFLAG_NO_AUTODMA;
 467
 468        if (idx == VIA_IDFLAG_SINGLE)
 469                d.host_flags |= IDE_HFLAG_SINGLE;
 470
 471        if ((via_config->flags & VIA_NO_UNMASK) == 0)
 472                d.host_flags |= IDE_HFLAG_UNMASK_IRQS;
 473
 474        d.udma_mask = via_config->udma_mask;
 475
 476        vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
 477        if (!vdev) {
 478                printk(KERN_ERR DRV_NAME " %s: out of memory :(\n",
 479                        pci_name(dev));
 480                return -ENOMEM;
 481        }
 482
 483        vdev->via_config = via_config;
 484
 485        rc = ide_pci_init_one(dev, &d, vdev);
 486        if (rc)
 487                kfree(vdev);
 488
 489        return rc;
 490}
 491
 492static void __devexit via_remove(struct pci_dev *dev)
 493{
 494        struct ide_host *host = pci_get_drvdata(dev);
 495        struct via82cxxx_dev *vdev = host->host_priv;
 496
 497        ide_pci_remove(dev);
 498        kfree(vdev);
 499}
 500
 501static const struct pci_device_id via_pci_tbl[] = {
 502        { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1),  0 },
 503        { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1),  0 },
 504        { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_CX700_IDE), 0 },
 505        { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_VX855_IDE), VIA_IDFLAG_SINGLE },
 506        { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410),      1 },
 507        { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6415),      1 },
 508        { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), 1 },
 509        { 0, },
 510};
 511MODULE_DEVICE_TABLE(pci, via_pci_tbl);
 512
 513static struct pci_driver via_pci_driver = {
 514        .name           = "VIA_IDE",
 515        .id_table       = via_pci_tbl,
 516        .probe          = via_init_one,
 517        .remove         = __devexit_p(via_remove),
 518        .suspend        = ide_pci_suspend,
 519        .resume         = ide_pci_resume,
 520};
 521
 522static int __init via_ide_init(void)
 523{
 524        return ide_pci_register_driver(&via_pci_driver);
 525}
 526
 527static void __exit via_ide_exit(void)
 528{
 529        pci_unregister_driver(&via_pci_driver);
 530}
 531
 532module_init(via_ide_init);
 533module_exit(via_ide_exit);
 534
 535MODULE_AUTHOR("Vojtech Pavlik, Bartlomiej Zolnierkiewicz, Michel Aubry, Jeff Garzik, Andre Hedrick");
 536MODULE_DESCRIPTION("PCI driver module for VIA IDE");
 537MODULE_LICENSE("GPL");
 538
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.