linux/Documentation/hwmon/ucd9000
<<
>>
Prefs
   1Kernel driver ucd9000
   2=====================
   3
   4Supported chips:
   5  * TI UCD90120, UCD90124, UCD9090, and UCD90910
   6    Prefixes: 'ucd90120', 'ucd90124', 'ucd9090', 'ucd90910'
   7    Addresses scanned: -
   8    Datasheets:
   9        http://focus.ti.com/lit/ds/symlink/ucd90120.pdf
  10        http://focus.ti.com/lit/ds/symlink/ucd90124.pdf
  11        http://focus.ti.com/lit/ds/symlink/ucd9090.pdf
  12        http://focus.ti.com/lit/ds/symlink/ucd90910.pdf
  13
  14Author: Guenter Roeck <guenter.roeck@ericsson.com>
  15
  16
  17Description
  18-----------
  19
  20From datasheets:
  21
  22The UCD90120 Power Supply Sequencer and System Health Monitor monitors and
  23sequences up to 12 independent voltage rails. The device integrates a 12-bit
  24ADC with a 2.5V internal reference for monitoring up to 13 power supply voltage,
  25current, or temperature inputs.
  26
  27The UCD90124 is a 12-rail PMBus/I2C addressable power-supply sequencer and
  28system-health monitor. The device integrates a 12-bit ADC for monitoring up to
  2913 power-supply voltage, current, or temperature inputs. Twenty-six GPIO pins
  30can be used for power supply enables, power-on reset signals, external
  31interrupts, cascading, or other system functions. Twelve of these pins offer PWM
  32functionality. Using these pins, the UCD90124 offers support for fan control,
  33margining, and general-purpose PWM functions.
  34
  35The UCD9090 is a 10-rail PMBus/I2C addressable power-supply sequencer and
  36monitor. The device integrates a 12-bit ADC for monitoring up to 10 power-supply
  37voltage inputs. Twenty-three GPIO pins can be used for power supply enables,
  38power-on reset signals, external interrupts, cascading, or other system
  39functions. Ten of these pins offer PWM functionality. Using these pins, the
  40UCD9090 offers support for margining, and general-purpose PWM functions.
  41
  42The UCD90910 is a ten-rail I2C / PMBus addressable power-supply sequencer and
  43system-health monitor. The device integrates a 12-bit ADC for monitoring up to
  4413 power-supply voltage, current, or temperature inputs.
  45
  46This driver is a client driver to the core PMBus driver. Please see
  47Documentation/hwmon/pmbus for details on PMBus client drivers.
  48
  49
  50Usage Notes
  51-----------
  52
  53This driver does not auto-detect devices. You will have to instantiate the
  54devices explicitly. Please see Documentation/i2c/instantiating-devices for
  55details.
  56
  57
  58Platform data support
  59---------------------
  60
  61The driver supports standard PMBus driver platform data. Please see
  62Documentation/hwmon/pmbus for details.
  63
  64
  65Sysfs entries
  66-------------
  67
  68The following attributes are supported. Limits are read-write; all other
  69attributes are read-only.
  70
  71in[1-12]_label          "vout[1-12]".
  72in[1-12]_input          Measured voltage. From READ_VOUT register.
  73in[1-12]_min            Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
  74in[1-12]_max            Maximum voltage. From VOUT_OV_WARN_LIMIT register.
  75in[1-12]_lcrit          Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
  76in[1-12]_crit           Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
  77in[1-12]_min_alarm      Voltage low alarm. From VOLTAGE_UV_WARNING status.
  78in[1-12]_max_alarm      Voltage high alarm. From VOLTAGE_OV_WARNING status.
  79in[1-12]_lcrit_alarm    Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
  80in[1-12]_crit_alarm     Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
  81
  82curr[1-12]_label        "iout[1-12]".
  83curr[1-12]_input        Measured current. From READ_IOUT register.
  84curr[1-12]_max          Maximum current. From IOUT_OC_WARN_LIMIT register.
  85curr[1-12]_lcrit        Critical minimum output current. From IOUT_UC_FAULT_LIMIT
  86                        register.
  87curr[1-12]_crit         Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
  88curr[1-12]_max_alarm    Current high alarm. From IOUT_OC_WARNING status.
  89curr[1-12]_crit_alarm   Current critical high alarm. From IOUT_OC_FAULT status.
  90
  91                        For each attribute index, either voltage or current is
  92                        reported, but not both. If voltage or current is
  93                        reported depends on the chip configuration.
  94
  95temp[1-2]_input         Measured temperatures. From READ_TEMPERATURE_1 and
  96                        READ_TEMPERATURE_2 registers.
  97temp[1-2]_max           Maximum temperature. From OT_WARN_LIMIT register.
  98temp[1-2]_crit          Critical high temperature. From OT_FAULT_LIMIT register.
  99temp[1-2]_max_alarm     Temperature high alarm.
 100temp[1-2]_crit_alarm    Temperature critical high alarm.
 101
 102fan[1-4]_input          Fan RPM.
 103fan[1-4]_alarm          Fan alarm.
 104fan[1-4]_fault          Fan fault.
 105
 106                        Fan attributes are only available on chips supporting
 107                        fan control (UCD90124, UCD90910). Attribute files are
 108                        created only for enabled fans.
 109                        Note that even though UCD90910 supports up to 10 fans,
 110                        only up to four fans are currently supported.
 111
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.