linux/Documentation/dvb/technisat.txt
<<
>>
Prefs
   1How to set up the Technisat/B2C2 Flexcop devices
   2================================================
   3
   41) Find out what device you have
   5================================
   6
   7Important Notice: The driver does NOT support Technisat USB 2 devices!
   8
   9First start your linux box with a shipped kernel:
  10lspci -vvv for a PCI device (lsusb -vvv for an USB device) will show you for example:
  1102:0b.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip /
  12 Technisat SkyStar2 DVB card (rev 02)
  13
  14dmesg | grep frontend may show you for example:
  15DVB: registering frontend 0 (Conexant CX24123/CX24109)...
  16
  172) Kernel compilation:
  18======================
  19
  20If the Flexcop / Technisat is the only DVB / TV / Radio device in your box
  21 get rid of unnecessary modules and check this one:
  22"Multimedia support" => "Customise analog and hybrid tuner modules to build"
  23In this directory uncheck every driver which is activated there
  24 (except "Simple tuner support" for ATSC 3rd generation only -> see case 9 please).
  25
  26Then please activate:
  272a) Main module part:
  28"Multimedia support" => "DVB/ATSC adapters"
  29 => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters"
  30
  31a.) => "Technisat/B2C2 Air/Sky/Cable2PC PCI" (PCI card) or
  32b.) => "Technisat/B2C2 Air/Sky/Cable2PC USB" (USB 1.1 adapter)
  33 and for troubleshooting purposes:
  34c.) => "Enable debug for the B2C2 FlexCop drivers"
  35
  362b) Frontend / Tuner / Demodulator module part:
  37"Multimedia support" => "DVB/ATSC adapters"
  38 => "Customise the frontend modules to build" "Customise DVB frontends" =>
  39
  401.) SkyStar DVB-S Revision 2.3:
  41a.) => "Zarlink VP310/MT312/ZL10313 based"
  42b.) => "Generic I2C PLL based tuners"
  43
  442.) SkyStar DVB-S Revision 2.6:
  45a.) => "ST STV0299 based"
  46b.) => "Generic I2C PLL based tuners"
  47
  483.) SkyStar DVB-S Revision 2.7:
  49a.) => "Samsung S5H1420 based"
  50b.) => "Integrant ITD1000 Zero IF tuner for DVB-S/DSS"
  51c.) => "ISL6421 SEC controller"
  52
  534.) SkyStar DVB-S Revision 2.8:
  54a.) => "Conexant CX24123 based"
  55b.) => "Conexant CX24113/CX24128 tuner for DVB-S/DSS"
  56c.) => "ISL6421 SEC controller"
  57
  585.) AirStar DVB-T card:
  59a.) => "Zarlink MT352 based"
  60b.) => "Generic I2C PLL based tuners"
  61
  626.) CableStar DVB-C card:
  63a.) => "ST STV0297 based"
  64b.) => "Generic I2C PLL based tuners"
  65
  667.) AirStar ATSC card 1st generation:
  67a.) => "Broadcom BCM3510"
  68
  698.) AirStar ATSC card 2nd generation:
  70a.) => "NxtWave Communications NXT2002/NXT2004 based"
  71b.) => "Generic I2C PLL based tuners"
  72
  739.) AirStar ATSC card 3rd generation:
  74a.) => "LG Electronics LGDT3302/LGDT3303 based"
  75b.) "Multimedia support" => "Customise analog and hybrid tuner modules to build"
  76 => "Simple tuner support"
  77
  78Author: Uwe Bugla <uwe.bugla@gmx.de> August 2009
  79
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.