linux/drivers/scsi/aha1740.h
<<
>>
Prefs
   1#ifndef _AHA1740_H
   2
   3/* $Id$
   4 *
   5 * Header file for the adaptec 1740 driver for Linux
   6 *
   7 * With minor revisions 3/31/93
   8 * Written and (C) 1992,1993 Brad McLean.  See aha1740.c
   9 * for more info
  10 *
  11 */
  12
  13#include <linux/types.h>
  14
  15#define SLOTSIZE        0x5c
  16
  17/* EISA configuration registers & values */
  18#define HID0(base)      (base + 0x0)
  19#define HID1(base)      (base + 0x1)
  20#define HID2(base)      (base + 0x2)
  21#define HID3(base)      (base + 0x3)
  22#define EBCNTRL(base)   (base + 0x4)
  23#define PORTADR(base)   (base + 0x40)
  24#define BIOSADR(base)   (base + 0x41)
  25#define INTDEF(base)    (base + 0x42)
  26#define SCSIDEF(base)   (base + 0x43)
  27#define BUSDEF(base)    (base + 0x44)
  28#define RESV0(base)     (base + 0x45)
  29#define RESV1(base)     (base + 0x46)
  30#define RESV2(base)     (base + 0x47)
  31
  32#define HID_MFG "ADP"
  33#define HID_PRD 0
  34#define HID_REV 2
  35#define EBCNTRL_VALUE 1
  36#define PORTADDR_ENH 0x80
  37/* READ */
  38#define G2INTST(base)   (base + 0x56)
  39#define G2STAT(base)    (base + 0x57)
  40#define MBOXIN0(base)   (base + 0x58)
  41#define MBOXIN1(base)   (base + 0x59)
  42#define MBOXIN2(base)   (base + 0x5a)
  43#define MBOXIN3(base)   (base + 0x5b)
  44#define G2STAT2(base)   (base + 0x5c)
  45
  46#define G2INTST_MASK            0xf0    /* isolate the status */
  47#define G2INTST_CCBGOOD         0x10    /* CCB Completed */
  48#define G2INTST_CCBRETRY        0x50    /* CCB Completed with a retry */
  49#define G2INTST_HARDFAIL        0x70    /* Adapter Hardware Failure */
  50#define G2INTST_CMDGOOD         0xa0    /* Immediate command success */
  51#define G2INTST_CCBERROR        0xc0    /* CCB Completed with error */
  52#define G2INTST_ASNEVENT        0xd0    /* Asynchronous Event Notification */
  53#define G2INTST_CMDERROR        0xe0    /* Immediate command error */
  54
  55#define G2STAT_MBXOUT   4       /* Mailbox Out Empty Bit */
  56#define G2STAT_INTPEND  2       /* Interrupt Pending Bit */
  57#define G2STAT_BUSY     1       /* Busy Bit (attention pending) */
  58
  59#define G2STAT2_READY   0       /* Host Ready Bit */
  60
  61/* WRITE (and ReadBack) */
  62#define MBOXOUT0(base)  (base + 0x50)
  63#define MBOXOUT1(base)  (base + 0x51)
  64#define MBOXOUT2(base)  (base + 0x52)
  65#define MBOXOUT3(base)  (base + 0x53)
  66#define ATTN(base)      (base + 0x54)
  67#define G2CNTRL(base)   (base + 0x55)
  68
  69#define ATTN_IMMED      0x10    /* Immediate Command */
  70#define ATTN_START      0x40    /* Start CCB */
  71#define ATTN_ABORT      0x50    /* Abort CCB */
  72
  73#define G2CNTRL_HRST    0x80    /* Hard Reset */
  74#define G2CNTRL_IRST    0x40    /* Clear EISA Interrupt */
  75#define G2CNTRL_HRDY    0x20    /* Sets HOST ready */
  76
  77/* This is used with scatter-gather */
  78struct aha1740_chain {
  79        u32 dataptr;            /* Location of data */
  80        u32 datalen;            /* Size of this part of chain */
  81};
  82
  83/* These belong in scsi.h */
  84#define any2scsi(up, p)                         \
  85(up)[0] = (((unsigned long)(p)) >> 16)  ;       \
  86(up)[1] = (((unsigned long)(p)) >> 8);          \
  87(up)[2] = ((unsigned long)(p));
  88
  89#define scsi2int(up) ( (((long)*(up)) << 16) + (((long)(up)[1]) << 8) + ((long)(up)[2]) )
  90
  91#define xany2scsi(up, p)        \
  92(up)[0] = ((long)(p)) >> 24;    \
  93(up)[1] = ((long)(p)) >> 16;    \
  94(up)[2] = ((long)(p)) >> 8;     \
  95(up)[3] = ((long)(p));
  96
  97#define xscsi2int(up) ( (((long)(up)[0]) << 24) + (((long)(up)[1]) << 16) \
  98                      + (((long)(up)[2]) <<  8) +  ((long)(up)[3]) )
  99
 100#define MAX_CDB 12
 101#define MAX_SENSE 14
 102#define MAX_STATUS 32
 103
 104struct ecb {                    /* Enhanced Control Block 6.1 */
 105        u16 cmdw;               /* Command Word */
 106        /* Flag Word 1 */
 107        u16 cne:1,              /* Control Block Chaining */
 108        :6, di:1,               /* Disable Interrupt */
 109        :2, ses:1,              /* Suppress Underrun error */
 110        :1, sg:1,               /* Scatter/Gather */
 111        :1, dsb:1,              /* Disable Status Block */
 112         ars:1;                 /* Automatic Request Sense */
 113        /* Flag Word 2 */
 114        u16 lun:3,              /* Logical Unit */
 115         tag:1,                 /* Tagged Queuing */
 116         tt:2,                  /* Tag Type */
 117         nd:1,                  /* No Disconnect */
 118        :1, dat:1,              /* Data transfer - check direction */
 119         dir:1,                 /* Direction of transfer 1 = datain */
 120         st:1,                  /* Suppress Transfer */
 121         chk:1,                 /* Calculate Checksum */
 122        :2, rec:1,:1;           /* Error Recovery */
 123        u16 nil0;               /* nothing */
 124        u32 dataptr;            /* Data or Scatter List ptr */
 125        u32 datalen;            /* Data or Scatter List len */
 126        u32 statusptr;          /* Status Block ptr */
 127        u32 linkptr;            /* Chain Address */
 128        u32 nil1;               /* nothing */
 129        u32 senseptr;           /* Sense Info Pointer */
 130        u8 senselen;            /* Sense Length */
 131        u8 cdblen;              /* CDB Length */
 132        u16 datacheck;          /* Data checksum */
 133        u8 cdb[MAX_CDB];        /* CDB area */
 134/* Hardware defined portion ends here, rest is driver defined */
 135        u8 sense[MAX_SENSE];    /* Sense area */
 136        u8 status[MAX_STATUS];  /* Status area */
 137        Scsi_Cmnd *SCpnt;       /* Link to the SCSI Command Block */
 138        void (*done) (Scsi_Cmnd *);     /* Completion Function */
 139};
 140
 141#define AHA1740CMD_NOP   0x00   /* No OP */
 142#define AHA1740CMD_INIT  0x01   /* Initiator SCSI Command */
 143#define AHA1740CMD_DIAG  0x05   /* Run Diagnostic Command */
 144#define AHA1740CMD_SCSI  0x06   /* Initialize SCSI */
 145#define AHA1740CMD_SENSE 0x08   /* Read Sense Information */
 146#define AHA1740CMD_DOWN  0x09   /* Download Firmware (yeah, I bet!) */
 147#define AHA1740CMD_RINQ  0x0a   /* Read Host Adapter Inquiry Data */
 148#define AHA1740CMD_TARG  0x10   /* Target SCSI Command */
 149
 150#define AHA1740_ECBS 32
 151#define AHA1740_SCATTER 16
 152#define AHA1740_CMDLUN 1
 153
 154#endif
 155
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.