linux/Documentation/powerpc/mpc52xx.txt
<<
>>
Prefs
   1Linux 2.6.x on MPC52xx family
   2-----------------------------
   3
   4For the latest info, go to http://www.246tNt.com/mpc52xx/
   5
   6To compile/use :
   7
   8  - U-Boot:
   9     # <edit Makefile to set ARCH=ppc & CROSS_COMPILE=... ( also EXTRAVERSION
  10        if you wish to ).
  11     # make lite5200_defconfig
  12     # make uImage
  13
  14     then, on U-boot:
  15     => tftpboot 200000 uImage
  16     => tftpboot 400000 pRamdisk
  17     => bootm 200000 400000
  18
  19  - DBug:
  20     # <edit Makefile to set ARCH=ppc & CROSS_COMPILE=... ( also EXTRAVERSION
  21        if you wish to ).
  22     # make lite5200_defconfig
  23     # cp your_initrd.gz arch/ppc/boot/images/ramdisk.image.gz
  24     # make zImage.initrd
  25     # make
  26
  27     then in DBug:
  28     DBug> dn -i zImage.initrd.lite5200
  29
  30
  31Some remarks :
  32 - The port is named mpc52xxx, and config options are PPC_MPC52xx. The MGT5100
  33   is not supported, and I'm not sure anyone is interesting in working on it
  34   so. I didn't took 5xxx because there's apparently a lot of 5xxx that have
  35   nothing to do with the MPC5200. I also included the 'MPC' for the same
  36   reason.
  37 - Of course, I inspired myself from the 2.4 port. If you think I forgot to
  38   mention you/your company in the copyright of some code, I'll correct it
  39   ASAP.
  40
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.