linux/Documentation/hwmon/zl6100
<<
>>
Prefs
   1Kernel driver zl6100
   2====================
   3
   4Supported chips:
   5  * Intersil / Zilker Labs ZL2004
   6    Prefix: 'zl2004'
   7    Addresses scanned: -
   8    Datasheet: http://www.intersil.com/data/fn/fn6847.pdf
   9  * Intersil / Zilker Labs ZL2005
  10    Prefix: 'zl2005'
  11    Addresses scanned: -
  12    Datasheet: http://www.intersil.com/data/fn/fn6848.pdf
  13  * Intersil / Zilker Labs ZL2006
  14    Prefix: 'zl2006'
  15    Addresses scanned: -
  16    Datasheet: http://www.intersil.com/data/fn/fn6850.pdf
  17  * Intersil / Zilker Labs ZL2008
  18    Prefix: 'zl2008'
  19    Addresses scanned: -
  20    Datasheet: http://www.intersil.com/data/fn/fn6859.pdf
  21  * Intersil / Zilker Labs ZL2105
  22    Prefix: 'zl2105'
  23    Addresses scanned: -
  24    Datasheet: http://www.intersil.com/data/fn/fn6851.pdf
  25  * Intersil / Zilker Labs ZL2106
  26    Prefix: 'zl2106'
  27    Addresses scanned: -
  28    Datasheet: http://www.intersil.com/data/fn/fn6852.pdf
  29  * Intersil / Zilker Labs ZL6100
  30    Prefix: 'zl6100'
  31    Addresses scanned: -
  32    Datasheet: http://www.intersil.com/data/fn/fn6876.pdf
  33  * Intersil / Zilker Labs ZL6105
  34    Prefix: 'zl6105'
  35    Addresses scanned: -
  36    Datasheet: http://www.intersil.com/data/fn/fn6906.pdf
  37  * Intersil / Zilker Labs ZL9101M
  38    Prefix: 'zl9101'
  39    Addresses scanned: -
  40    Datasheet: http://www.intersil.com/data/fn/fn7669.pdf
  41  * Intersil / Zilker Labs ZL9117M
  42    Prefix: 'zl9117'
  43    Addresses scanned: -
  44    Datasheet: http://www.intersil.com/data/fn/fn7914.pdf
  45  * Ericsson BMR450, BMR451
  46    Prefix: 'bmr450', 'bmr451'
  47    Addresses scanned: -
  48    Datasheet:
  49http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146401
  50  * Ericsson BMR462, BMR463, BMR464
  51    Prefixes: 'bmr462', 'bmr463', 'bmr464'
  52    Addresses scanned: -
  53    Datasheet:
  54http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146256
  55
  56
  57Author: Guenter Roeck <guenter.roeck@ericsson.com>
  58
  59
  60Description
  61-----------
  62
  63This driver supports hardware montoring for Intersil / Zilker Labs ZL6100 and
  64compatible digital DC-DC controllers.
  65
  66The driver is a client driver to the core PMBus driver. Please see
  67Documentation/hwmon/pmbus and Documentation.hwmon/pmbus-core for details
  68on PMBus client drivers.
  69
  70
  71Usage Notes
  72-----------
  73
  74This driver does not auto-detect devices. You will have to instantiate the
  75devices explicitly. Please see Documentation/i2c/instantiating-devices for
  76details.
  77
  78WARNING: Do not access chip registers using the i2cdump command, and do not use
  79any of the i2ctools commands on a command register used to save and restore
  80configuration data (0x11, 0x12, 0x15, 0x16, and 0xf4). The chips supported by
  81this driver interpret any access to those command registers (including read
  82commands) as request to execute the command in question. Unless write accesses
  83to those registers are protected, this may result in power loss, board resets,
  84and/or Flash corruption. Worst case, your board may turn into a brick.
  85
  86
  87Platform data support
  88---------------------
  89
  90The driver supports standard PMBus driver platform data.
  91
  92
  93Module parameters
  94-----------------
  95
  96delay
  97-----
  98
  99Intersil/Zilker Labs DC-DC controllers require a minimum interval between I2C
 100bus accesses. According to Intersil, the minimum interval is 2 ms, though 1 ms
 101appears to be sufficient and has not caused any problems in testing. The problem
 102is known to affect all currently supported chips. For manual override, the
 103driver provides a writeable module parameter, 'delay', which can be used to set
 104the interval to a value between 0 and 65,535 microseconds.
 105
 106
 107Sysfs entries
 108-------------
 109
 110The following attributes are supported. Limits are read-write; all other
 111attributes are read-only.
 112
 113in1_label               "vin"
 114in1_input               Measured input voltage.
 115in1_min                 Minimum input voltage.
 116in1_max                 Maximum input voltage.
 117in1_lcrit               Critical minimum input voltage.
 118in1_crit                Critical maximum input voltage.
 119in1_min_alarm           Input voltage low alarm.
 120in1_max_alarm           Input voltage high alarm.
 121in1_lcrit_alarm         Input voltage critical low alarm.
 122in1_crit_alarm          Input voltage critical high alarm.
 123
 124in2_label               "vout1"
 125in2_input               Measured output voltage.
 126in2_lcrit               Critical minimum output Voltage.
 127in2_crit                Critical maximum output voltage.
 128in2_lcrit_alarm         Critical output voltage critical low alarm.
 129in2_crit_alarm          Critical output voltage critical high alarm.
 130
 131curr1_label             "iout1"
 132curr1_input             Measured output current.
 133curr1_lcrit             Critical minimum output current.
 134curr1_crit              Critical maximum output current.
 135curr1_lcrit_alarm       Output current critical low alarm.
 136curr1_crit_alarm        Output current critical high alarm.
 137
 138temp[12]_input          Measured temperature.
 139temp[12]_min            Minimum temperature.
 140temp[12]_max            Maximum temperature.
 141temp[12]_lcrit          Critical low temperature.
 142temp[12]_crit           Critical high temperature.
 143temp[12]_min_alarm      Chip temperature low alarm.
 144temp[12]_max_alarm      Chip temperature high alarm.
 145temp[12]_lcrit_alarm    Chip temperature critical low alarm.
 146temp[12]_crit_alarm     Chip temperature critical high alarm.
 147
lxr.linux.no kindly hosted by Redpill Linpro AS, provider of Linux consulting and operations services since 1995.